Updated

SS規格の説明
シンガポール国家標準
(SS,CP,TR規格)番号順一覧


手持ちの情報を整理したものであり、規格原本による確認は行っていません。 すべてを網羅しているわけでも、正確さ、最新性を保証するものではありませんので、 規格原本などで確認してください。
CP CP 0xx CP 1xx      
SS SS 0xx SS 1xx SS 2xx SS 3xx SS 4xx
SS 5xx        
SS EN xxxxx
SS IEC 6xxxx
SS IEC CISPR xx
SS ISO 0xxxx,1xxxx,2xxxx
SS ISO/IEC xxxxx,
TR TR 0xx        

SS : Singapore Standards
CP : Code of practices
TR : Technical References
Sort Mk 規格番号 Top規格名称(英語) 国際規格分類
( ICSコードの説明 )
国際整合
( IDT,MOD,NEQ等の説明 )
CP 00001 2001   CP 1 : 2001 Code of practice for the use of timber in buildings 91.080.20  
CP 00002 2000   CP 2 : 2000 Code of practice for installation, operation and maintenance of electric passenger and goods lifts
Erratum No. 1, May 2001
Amendment No. 1, January 2004
91.140.90  
CP 00003 1988   CP 3 : 1988 Code of practice for food hygiene (general) 67.020  
CP 00004 2003   CP 4 : 2003 Code of practice for foundations
Erratum No. 1, August 2003
91.040;
93.020
 
CP 00005 1998   CP 5 : 1998 Code of practice for electrical installations 91.140.50;
29.020
 
CP 00006 1978   CP 6 : 1978 Code of practice for building drawing 01.100.30  
CP 00007 1997   CP 7 : 1997 Code of practice for structural use of timber
Erratum No. 1, September 1999; Erratum No. 2, September 2001
91.080.20  
CP 00008 1978   CP 8 : 1978 [withdrawn]
Code of practice for use of manual metal-arc welding in the steel building construction
25.160.10;
91.080.10
 
CP 00009 1988   CP 9 : 1988 [withdrawn]
Code of practice for the description and marking of articles of, or containing precious metal
   
CP 00010 1993   CP 10 : 1993 [withdrawn]
Code of practice for the installation and servicing of electrical fire alarm systems
Erratum No. 1, November 1993
13.220.20;
13.320
 
CP 00010 2005 CP 10 : 2005 Code of practice for the installation and servicing of electrical fire alarm systems 13.220.20;
13.320
 
CP 00011 2002   CP 11 : 2002 Code of practice for demolition 91.040;
91.200
 
CP 00012-01 2000   CP 12 : Part 1 : 2000 Code of practice for the filling, inspection, testing and maintenance of containers for the storage and transport of compressed gases - Seamless metal containers for gases, excluding dissolved acetylene 71.100.20  
CP 00012-02 1998   CP 12 : Part 2 : 1998 Code of practice for the filling, inspection, testing and maintenance of containers for the storage and transport of compressed gases - Containers for dissolved acetylene gas 23.020.30  
CP 00013 1999   CP 13 : 1999 Code of practice for mechanical ventilation and air-conditioning in buildings
Amendment No. 1, February 2000;
Erratum No. 1, June 2001
91.140  
CP 00014 1996   CP 14 : 1996 Code of practice for scaffolds 91.220  
CP 00015 2004   CP 15 : 2004 Code of practice for installation, operation and maintenance of escalators and passenger conveyors 91.140.90  
CP 00016 1991   CP 16 : 1991 Code of practice for earthing 13.260;
29.020
 
CP 00017 1991   CP 17 : 1991 Code of practice for the maintenance of electrical switchgear for voltages up to and including 22kV 29.120.60  
CP 00018 1992   CP 18 : 1992 Code of practice for earthworks 93.020  
CP 00019 2000   CP 19 : 2000 Code of practice for the installation and maintenance of emergency lighting and power supply systems in buildings
Amendment No. 1, May 2003
91.140.50  
CP 00020 1999   CP 20 : 1999 Code of practice for suspended scaffolds
Amendment No. 1, December 2003
91.220  
CP 00021 1981   CP 21 : 1981 Code of practice for safeguarding of mechanical power presses 13.110;
25.120.10
 
CP 00022 1981   CP 22 : 1981 Code of practice for the painting of buildings 87.020;
91.180
 
CP 00023 2000   CP 23 : 2000 Code of practice for formwork
Erratum No. 1, October 2000
91.080.01  
CP 00024 1999   CP 24 : 1999 Code of practice for energy efficiency standard for building services and equipment 91.040  
CP 00025 1999   CP 25 : 1999 Code of practice for emergency voice communication system in buildings 13.320;
91.120
 
CP 00026 1983   CP 26 : 1983 Code of practice for drainage of roofs 91.060.20;
91.140.80
 
CP 00027 1999   CP 27 : 1999 Code of practice for factory layout - Safety, health and welfare considerations
Amendment No. 1, October 2001
Amendment No. 2, September 2003
91.040.20;
91.120;
91.140
 
CP 00028 1984   CP 28 : 1984 Code of practice for the construction, care and safe use of shears
Amendment No. 1, August 1999
13.110;
25.120.10
 
CP 00029 1998   CP 29 : 1998 Code of practice for fire hydrant systems and hose reels
Amendment No. 1, November 1998
13.220.30  
CP 00030 1985   CP 30 : 1985 Code of practice for safe loading on vehicles 13.100;
43.080
 
CP 00031 1996   CP 31 : 1996 Code of practice for installation, operation, maintenance, performance and constructional requirements of mains failure standby generating systems 29.160.40  
CP 00032 1985   CP 32 : 1985 Code of practice for the transportation and storage of pesticides 55.220;
65.100
 
CP 00033 1996   CP 33 : 1996 Code of practice for lightning protection
Amendment No. 1, February 1999
91.120.40  
CP 00034 1985   CP 34 : 1985 Code of practice for bulk liquid oxygen storage installations on user premises 23.020.10;
23.020.30
 
CP 00035 1996   CP 35 : 1996 Code of practice for the selection, care and maintenance of steel wire ropes for hoisting
Erratum No. 1, October 1998
77.140.65  
CP 00036 1987   CP 36 : 1987 Code of practice for modular coordination for the building industry 91.040; 91.200  
CP 00037 2000   CP 37 : 2000 Code of practice for safe use of mobile cranes 53.020.20  
CP 00038 1999   CP 38 : 1999 Code of practice for artificial lighting in buildings 91.160.01  
CP 00039 1994   CP 39 : 1994 Code of practice for the installation of master antennae television systems for the reception of VHF and UHF sound and television broadcasting transmission operating between 5 MHz and 824 MHz 33.160.25  
CP 00040 1987   CP 40 : 1987 Code of practice for storage of flammable and combustible liquids 23.020;
55.140
 
CP 00041 1988   CP 41 : 1988 Code of practice for the safe use of liquefied petroleum gas system in internal combustion engines 43.060;
75.160.30
 
CP 00042 1988   CP 42 : 1988 Code of practice for guarding and safe use of woodworking machinery
Amendment No. 1, August 1999
13.110;
79.120.10
 
CP 00043 1988   CP 43 : 1988 Code of practice for the installation of concrete interlocking roofing tiles 91.100.30  
CP 00044 1988   CP 44 : 1988 [withdrawn => CP 88 Part 1:2001]
Code of practice for temporary electrical installations for construction and building sites
Amendment No. 1, May 1992
29.260.10;
91.140.50
 
CP 00045 1989   CP 45 : 1989 Code of practice for Halon 1301 fire protection systems
Erratum No. 1, January 1990
13.220.20  
CP 00046 1989   CP 46 : 1989 Code of practice for the processing and handling of quick frozen foods 67.020  
CP 00047 1989   CP 47 : 1989 Code of practice for temporary electrical installations for shipbuilding and shiprepairing yards
Amendment No. 1, November 1990
29.260;
47.020
 
CP 00048 1989   CP 48 : 1989 Code of practice for water services
Amendment No. 1, May 1992
Amendment No. 2, May 1994
91.140.60  
CP 00049 1998   CP 49 : 1998 Code of practice for noise control on construction and demolition sites
Amendment No. 1, January 1999
Amendment No. 2, April 2003
17.140.20  
CP 00050 1997 CP 50 : 1997 [withdrawn => SS 510:2005]
Code of practice for safety in welding and cutting (and other operations involving the use of heat)
13.220.20  
CP 00051 2004   CP 51 : 2004 Code of practice for manufactured gas pipe installation 23.040.10;
23.040.15;
91.140.40
 
CP 00052 1990   CP 52 : 1990 [withdrawn]
Code of practice for automatic fire sprinkler system
Erratum No. 1, November 1991
Amendment No. 1, September 1995
13.220.10  
CP 00052 2004   CP 52 : 2004 Code of practice for automatic fire sprinkler system 13.220.10  
CP 00053 1999   CP 53 : 1999 Code of practice for safe use of industrial robots 25.040.30 Modified adoption of ISO 10218 : 1992
CP 00054 1990   CP 54 : 1990 Code of practice for tofu and related products 67.060;
67.080
 
CP 00055 1991   CP 55 : 1991 Code of practice for use and maintenance of portable fire extinguishers 13.220.30  
CP 00056 1991   CP 56 : 1991 Code of practice for internal plastering 91.100.10  
CP 00057 1991   CP 57 : 1991 Code of practice for setting out of building and civil engineering works 91.080.01;
91.200;
93.010
 
CP 00058 1992   CP 58 : 1992 Code of practice for application, operation and maintenance of dry-type transformers 29.180  
CP 00059 1998   CP 59 : 1998 Code of practice for construction, installation, operation and maintenance of intruder alarm systems 13.310  
CP 00060 1996   CP 60 : 1996 [withdrawn]
Code of practice for bunkering by bunker barges/tankers
Amendment No. 1, May 2001
01.140.30;
47.020
 
CP 00060 2004   CP 60 : 2004 Code of practice for bunkering by bunker tankers 01.140.30;
47.020
 
CP 00061-01 1994   CP 61 : Part 1 : 1994 Code of practice for packaging and containers for hazardous substances - List of commonly used hazardous substances 13.300;
55.140
 
CP 00061-02 1994   CP 61 : Part 2 : 1994 Code of practice for packaging and containers for hazardous substances - Packaging requirements for hazardous substances 13.300;
55.140
 
CP 00061-03 1994   CP 61 : Part 3 : 1994 Code of practice for packaging and containers for hazardous substances - Tank requirements for hazardous substances 13.300;
55.140
 
CP 00062 1995   CP 62 : 1995 Code of practice for safe use of tower cranes 53.020.20  
CP 00063 1996   CP 63 : 1996 Code of practice for the lifting of persons in work platforms suspended from cranes 53.020.20;
53.020.30
 
CP 00064 1996   CP 64 : 1996 Code of practice for mee and kway teow products (English version) and (Chinese version) 67.060  
CP 00065-01 1999   CP 65 : Part 1 : 1999 Code of practice for structural use of concrete - Design and construction
Erratum No. 1, September 2000
91.080.40  
CP 00065-02 1996   CP 65 : Part 2 : 1996 Code of practice for structural use of concrete - Special circumstances
Erratum No. 1, September 2000
91.080.40  
CP 00066 1997   CP 66 : 1997 Code of practice for pre-cooked chilled food 67.020  
CP 00067-01 1997   CP 67 : Part 1 : 1997 Code of practice for cleaning and surface repair of buildings - Natural stone, cast stone and clay brick masonry
Erratum No. 1, October 1997
91.040.01  
CP 00067-02 1999   CP 67 : Part 2 : 1999 Code of practice for cleaning and surface repair of buildings - Concrete and concrete masonry
Erratum No. 1, May 2000
91.120  
Cp 00068 1997   CP 68 : 1997 Code of practice for ceramic wall and floor tiling 91.200  
CP 00069 1998   CP 69 : 1998 Code of practice for microfilming of documents on 16 mm black and white, silver-gelatin type microfilm/planetary and rotary camera filming – Operating procedures 37.080  
CP 00070 1998   CP 70 : 1998 Code of practice for microfilming of technical drawings and other drawing office documents on 35 mm black and white, silver-gelatin type microfilm/planetary camera filming – Operating procedures 37.080  
CP 00071 1998   CP 71 : 1998 Code of practice for quality control inspection of 16 mm and 35 mm black and white, silver-gelatin type microfilm 37.080  
CP 00072 1998   CP 72 : 1998 Code of practice for microfilming of newspapers on 35 mm black and white, silver-gelatin type microfilm/planetary camera filming – Operating procedures 37.080  
CP 00073 1998   CP 73 : 1998 Code of practice for design of concrete structures for retaining aqueous liquids 91.080.40  
CP 00074 1998   CP 74 : 1998 Code of practice for selection, use, and maintenance of respiratory protective devices 13.340.30  
CP 00075 1998   CP 75 : 1998 Code of practice for gas cylinders – Procedures for change of gas services 23.020.30 Identical adoption of ISO 11621 : 1997
CP 00076 1999   CP 76 : 1999 Code of practice for the selection, use, care and maintenance of hearing protectors
Erratum No. 1, May 1999
Erratum No. 2, November 2002
13.340.20  
CP 00077 1999   CP 77 : 1999 Code of practice for bunker surveying 47.020.01  
CP 00078 1999   CP 78 : 1999 Code of practice for the distribution of hazardous chemicals 13.300  
CP 00079 1999   CP 79 : 1999 Code of practice for safety management system for construction worksites
Erratum No. 1, November 1999
13.100;
91.010.01
 
CP 00080 1999   CP 80 : 1999 Code of practice for classification of construction cost information 91.010.01  
CP 00081 1999   CP 81 : 1999 Code of practice for precast concrete slab and wall panels 91.100.30  
CP 00082 1999   CP 82 : 1999 Code of practice for waterproofing of reinforced concrete buildings 91.120.30  
CP 00083-01 2000   CP 83 : Part 1 : 2000 [withdrawn]
Code of practice for construction computer-aided design (CAD) - Organisation and naming of CAD layers
35.240.10  
CP 00083-01 2004   CP 83 : Part 1 : 2004 Code of practice for construction computer-aided design (CAD) - Organisation and naming of CAD layers 01.100.30  
CP 00083-02 2000   CP 83 : Part 2 : 2000 Code of practice for construction computer-aided design (CAD) - CAD symbols 35.240.10  
CP 00083-03 2001   CP 83 : Part 3 : 2001 Code of practice for construction computer-aided design (CAD) - Organising and naming of CAD files 35.240.10  
CP 00083-04 2001   CP 83 : Part 4 : 2001 Code of practice for construction computer-aided design (CAD) - CAD drafting conventions 01.100.30  
CP 00083-05 2001   CP 83 : Part 5 : 2001 Code of practice for construction computer aided design (CAD) - Colour and linetype 35.340.10  
CP 00084 2000   CP 84 : 2000 Code of practice for entry into and safe working in confined spaces 13.100  
CP 00085 2000   CP 85 : 2000 Code of practice for cylinders in bundles for permanent and liquefiable gases (excluding acetylene) – Inspection at time of filling 23.020.30 Modified adoption of ISO 11755 : 1996
CP 00086 2000   CP 86 : 2000 Code of practice for safe use of lasers in the building and construction industry 91.200  
CP 00087 2001   CP 87 : 2001 Code of practice for illumination in industrial premises 91.160.10  
CP 00088-01 2001   CP 88 : Part 1 : 2001 Code of practice for temporary electrical installations - Construction and building sites
Erratum No. 1, May 2001
29.260.10  
CP 00088-02 2001   CP 88 : Part 2 : 2001 Code of practice for temporary electrical installations - Festive lighting, trade-fairs, mini-fairs and exhibition sites 29.260.10  
CP 00088-03 2004   CP 88 : Part 3 : 2004 Code of practice for temporary electrical installations - Shipbuilding and ship-repairing yards 29.260.10  
CP 00089 2001   CP 89 : 2001 Code of practice for metal roofing 91.060.20  
CP 00090 2001   CP 90 : 2001 Code of practice for design and installation of partition walls 91.060.10  
CP 00091 2001   CP 91 : 2001 Code of practice for lockout procedure 13.110  
CP 00092 2002   CP 92 : 2002 Code of practice for manual handiing 53.120  
CP 00093 2002   CP 93 : 2002 [Not Available]
Code of practice for classification of construction resources information
Amendment No. 1, May 2002
91.010.01 Adaptation of CSI/CSC Masterformat : Master list of numbers and titles for the construction industry, 1995 edition
CP 00094 2002   CP 94 : 2002 Code of practice for installation of clay roofing tiles 91.100.15  
CP 00095 2002   CP 95 : 2002 Cold chain management - Milk and dairy products 67.100  
CP 00096 2002   CP 96 : 2002 Code of practice for curtain walls 91.060.10  
CP 00097-01 2002   CP 97 : Part 1 : 2002 Code of practice for construction electronic measurement standards (CEMS) - Standard method of measurement (SMM) for building works 91.200  
CP 00097-02 2004   CP 97 : Part 2 : 2004 {Temporary not Available]
Code of practice for construction electronic measurement standard (CEMS) - Standard method of measurement for mechanical and electrical works
91.200  
CP 00098 2003   CP 98 : 2003 Code of practice for preparation and use of material safety data sheets (MSDS)
Erratum No. 1, June 2003
71.020  
CP 00099 2003   CP 99 : 2003 Code of practice for industrial noise control
Erratum No. 1, April 2004
13.140  
Sort Mk 規格番号 Top規格名称(英語) 国際規格分類
( ICSコードの説明 )
国際整合
( IDT,MOD,NEQ等の説明 )
CP 00100 2004   CP 100 : 2004 Code of practice for hazardous waste management 13.030.01  
CP 00101 2004   CP 101 : 2004 Code of practice for powered counterbalance forklifts    
CP 00102 2004   CP 102 : 2004 Code of practice for temporary housing quarters on construction sites 13.030.01  
Sort Mk 規格番号 Top規格名称(英語) 国際規格分類
( ICSコードの説明 )
国際整合
( IDT,MOD,NEQ等の説明 )
SS 00001 1984   SS 1 : 1984 Plywood 79.060.10  
SS 00002-01 1999   SS 2 : Part 1 : 1999 Steel for the reinforcement of concrete - Plain bars (steel grade 300) 77.140.60  
SS 00002-02 1999   SS 2 : Part 2 : 1999 Steel for the reinforcement of concrete - Ribbed bars (steel grade 500) 77.140.60  
SS 00002-03 1987   SS 2 : Part 3 : 1987 Steel for the reinforcement of concrete - Plain and ribbed bars (steel grades 250 and 460) 77.140.60  
SS 00003 1970   SS 3 : 1970 [withdrawn => SS 146]
General safety requirements for domestic electrical appliances - Heating and cooking appliances
   
SS 00004 1970   SS 4 : 1970 [withdrawn]
Electrical refrigerators and food freezers for household use
   
SS 00005 2003   SS 5 : Part 0 : 2003 Methods of test for paints, varnishes and related materials - General introduction    
SS 00005-A01 2003   SS 5 : Part A1 : 2003 Methods of test for paints, varnishes and related materials - Sampling 87.040 Identical adoption of ISO 15528 : 2000
SS 00005-A02 2003   SS 5 : Part A2 : 2003 Methods of test for paints, varnishes and related materials - Examination and preparation of samples for testing 87.040 Identical adoption of ISO 1513 : 1992
SS 00005-A03 2003   SS 5 : Part A3 : 2003 Methods of test for paints, varnishes and related materials - Standard panels for testing 87.040 Modified adoption of ISO 1514 : 1993
SS 00005-A04 2003   SS 5 : Part A4 : 2003 Methods of test for paints, varnishes and related materials - Temperature and humidities for conditioning and testing 87.040 Identical adoption of ISO 3270 : 1984
SS 00005-B01 2003   SS 5 : Part B1 : 2003 Methods of test for paints, varnishes and related materials - Determination of film thickness 87.040 Modified adoption of ISO 2808 : 1997
SS 00005-B02 2003   SS 5 : Part B2 : 2003 Methods of test for paints, varnishes and related materials - Determination of non-volatile matter 87.040 Identical adoption of ISO 3251 : 1993
SS 00005-B03 1987   SS 5 : Part B3 : 1987 Methods of test for paints, varnishes and related materials - Determination of water by the Dean and Stark method 87.040  
SS 00005-B04 2003   SS 5 : Part B4 : 2003 Methods of test for paints, varnishes and related materials - Condition in container 87.040  
SS 00005-B05 2003   SS 5 : Part B5 : 2003 Methods of test for paints, varnishes and related materials - Skinning (partially filled container) 87.040  
SS 00005-B06 1987   SS 5 : Part B6 : 1987 Methods of test for paints, varnishes and related materials - Storage stability (filled container) 87.040  
SS 00005-B07 2003   SS 5 : Part B7 : 2003 Methods of test for paints, varnishes and related materials - Density 87.040 Identical adoption of ISO 2811-1 : 1997
SS 00005-B08 1987   SS 5 : Part B8 : 1987 Methods of test for paints, varnishes and related materials - Reducibility and dilution stability 87.040  
SS 00005-B09 2003   SS 5 : Part B9 : 2003 Methods of test for paints, varnishes and related materials - Brushing properties 87.040  
SS 00005-B10 2003   SS 5 : Part B10 : 2003 Methods of test for paints, varnishes and related materials - Spraying properties 87.040  
SS 00005-B11 2003   SS 5 : Part B11 : 2003 Methods of test for paints, varnishes and related materials - Determination of viscosity by Ford viscosity cup 87.040  
SS 00005-B12 2003   SS 5 : Part B12 : 2003 Methods of test for paints, varnishes and related materials - Consistency of paints using the Stormer viscometer 87.040  
SS 00005-B13 2003   SS 5 : Part B13 : 2003 Methods of test for paints, varnishes and related materials - Fineness of grind 87.040 Identical adoption of ISO 1524 : 2000
SS 00005-B14 1987   SS 5 : Part B14 : 1987 Methods of test for paints, varnishes and related materials - Pigment content (centrifuge) 87.040  
SS 00005-B15 1987   SS 5 : Part B15 : 1987 Methods of test for paints, varnishes and related materials - Determination of flashpoint - Closed cup equilibrium method 87.040  
SS 00005-B16 1987   SS 5 : Part B16 : 1987 Methods of test for paints, varnishes and related materials - Determination of viscosity by the Brookfield viscometer 87.040  
SS 00005-C01 1987   SS 5 : Part C1 : 1987 Methods of test for paints, varnishes and related materials - Qualitative test for rosin (Lieberman Storch) 87.040  
SS 00005-C02 1987   SS 5 : Part C2 : 1987 Methods of test for paints, varnishes and related materials - Determination of aluminium metal content 87.040  
SS 00005-C03 1987   SS 5 : Part C3 : 1987 Methods of test for paints, varnishes and related materials - Analysis of red lead in pigment 87.040  
SS 00005-C04 1987   SS 5 : Part C4 : 1987 [withdrawn]
Methods of test for paints, varnishes and related materials - Determination of low concentrations of mercury in paint by atomic absorption spectroscopy
87.040  
SS 00005-C04 1988 SS 5 : Part C4 : 1988 Methods of test for paints, varnishes and related materials - Determination of low concentrations of mercury in paint by atomic absorption spectroscopy 87.040  
SS 00005-C05 1988   SS 5 : Part C5 : 1988 Methods of test for paints, varnishes and related materials - Determination of zinc chromate pigment content (from total chromium) 87.040  
SS 00005-C06 1988   SS 5 : Part C6 : 1988 Methods of test for paints, varnishes and related materials - Determination of low concentrations of lead, cadmium and cobalt in paint by atomic absorption spectroscopy 87.040  
SS 00005-C07 1989   SS 5 : Part C7 : 1989 Methods of test for paints, varnishes and related materials - Determination of total iron in inorganic pigments containing iron 87.040  
SS 00005-D01 2003   SS 5 : Part D1 : 2003 Methods of test for paints, varnishes and related materials - Wet edge time 87.040  
SS 00005-D02 2003   SS 5 : Part D2 : 2003 Methods of test for paints, varnishes and related materials - Surface-drying test (Ballotini method) 87.040 Modified adoption of ISO 1517 : 1973
SS 00005-D03 1988   SS 5 : Part D3 : 1988 Methods of test for paints, varnishes and related materials - Hard-drying time 87.040  
SS 00005-D04 1988   SS 5 : Part D4 : 1988 Methods of test for paints, varnishes and related materials - No pick-up time 87.040  
SS 00005-D05 2003   SS 5 : Part D5 : 2003 Methods of test for paints, varnishes and related materials - Determination of through-dry state and through-dry time 87.040 Modified adoption of ISO 9117 : 1990
SS 00005-E01 2003   SS 5 : Part E1 : 2003 Methods of test for paints, varnishes and related materials - Measurement of specular gloss of non-metallic paint films at 20o,60o and 85o 87.040 Modified adoption of ISO 2813 : 1994
SS 00005-E02 2003   SS 5 : Part E2 : 2003 Methods of test for paints, varnishes and related materials - Determination of contrast ratio (opacity) of light-coloured paints at a fixed spreading rate 87.040 Modified adoption of ISO 6504-3 : 1998
SS 00005-E03 2003   SS 5 : Part E3 : 2003 Methods of test for paints, varnishes and related materials - Visual comparison of the colour of paints 87.040 Identical adoption of ISO 3668 : 1998
SS 00005-F01 2003   SS 5 : Part F1 : 2003 Methods of test for paints, varnishes and related materials - Bend test (cylindrical mandrel) 87.040 Modified adoption of ISO 1519 : 1973
SS 00005-F02 2003   SS 5 : Part F2 : 2003 Methods of test for paints, varnishes and related materials - Scratch test 87.040 Modified adoption of ISO 1518 : 1992
SS 00005-F03 2003   SS 5 : Part F3 : 2003 Methods of test for paints, varnishes and related materials - Abrasion resistance (Taber abrader) 87.040  
SS 00005-F04 1989   SS 5 : Part F4 : 1989 Methods of test for paints, varnishes and related materials - Abrasion resistance by falling abrasive 87.040  
SS 00005-F05 2003   SS 5 : Part F5 : 2003 Methods of test for paints, varnishes and related materials - Washability (wet abrasion) of emulsion paint 87.040  
SS 00005-G01 2003   SS 5 : Part G1 : 2003 Methods of test for paints, varnishes and related materials - Determination of resistance to continuous neutral salt spray 87.040 Modified adoption of ISO 7253 : 1996
SS 00005-G02 2003   SS 5 : Part G2 : 2003 Methods of test for paints, varnishes and related materials - Alkali resistance (spotting method) 87.040  
SS 00005-G03 2003   SS 5 : Part G3 : 2003 Methods of test for paints, varnishes and related materials - Colour fastness to light (Xenon arc) 87.040  
SS 00005-G04 2003   SS 5 : Part G4 : 2003 Methods of test for paints, varnishes and related materials - Accelerated weathering (Xenon arc) 87.040  
SS 00005-G05 2003   SS 5 : Part G5 : 1992 Methods of test for paints, varnishes and related materials - Resistance to bleeding 87.040  
SS 00005-G06 2003   SS 5 : Part G6 : 2003 Methods of test for paints, varnishes and related materials - Resistance to humidity under condensation conditions 87.040 Modified adoption of ISO 6270-1 : 1998
SS 00005-H01 1985   SS 5 : Part H1 : 1985 Methods of test for paints, varnishes and related materials - Evaluating degree of settling of paint 87.040  
SS 00005-H02 1988   SS 5 : Part H2 : 1988 Methods of test for paints, varnishes and related materials - Designation of degree of blistering 87.040  
SS 00005-H03 1988   SS 5 : Part H3 : 1988 Methods of test for paints, varnishes and related materials - Designation of degree of rusting 87.040  
SS 00005-H04 1988   SS 5 : Part H4 : 1988 Methods of test for paints, varnishes and related materials - Designation of degree of cracking 87.040  
SS 00005-H05 1988   SS 5 : Part H5 : 1988 Methods of test for paints, varnishes and related materials - Designation of degree of flaking 87.040  
SS 00005-H06 2003   SS 5 : Part H6 : 2003 Methods of test for paints, varnishes and related materials - Evaluating degree of bleeding of road marking paint 87.040  
SS 00005-H07 2003   SS 5 : Part H7 : 2003 Methods of test for paints, varnishes and related materials - Rating of degree of chalking by tape method 87.040 Identical adoption of ISO 4628-6 : 1990
SS 00006 1970   SS 6 : 1970 [withdrawn => SS 494:2001)
Red lead based primers for iron and steel surfaces
Erratum No. 1, May 1971
Amendment No. 1, May 1977
Amendment No 2, January 1981Amendment No. 4, September 1995
Confirmed 1995
87.060.10  
SS 00007 1998   SS 7 : 1998 Paint - Finishing, gloss enamel 87.040.10  
SS 00008 2001   SS 8 : 2001 Hydrochloric acid, technical 71.060.30  
SS 00009 1992   SS 9 : 1992 Protective helmets for motor cyclists
Amendment No. 1, May 1994
Amendment No. 2, January 2004
13.340.10  
SS 00010 1970   SS 10 : 1970 Full-cream sweetened condensed milk
Amendment No. 1, November 1981
Amendment No. 2, December 1986
Amendment No. 3, March 1990
Confirmed 1986
67.100.10  
SS 00011-00 1994   SS 11 : Part 0 : 1994 Methods of sampling and tests for fats and oils - General introduction 67.200.10  
SS 00011-01 1994   SS 11 : Part 1 : 1994 [Not Available]
Methods of sampling and tests for fats and oils - Sampling
67.200.10 Identical adoption of ISO 5555 : 1991
SS 00011-02 1994   SS 11 : Part 2 : 1994 [Not Available]
Methods of sampling and tests for fats and oils - Preparation of test sample
67.200.10 Identical adoption of ISO 661 : 1989
SS 00011-03 1994   SS 11 : Part 3 : 1994 [Not Available]
Methods of sampling and tests for fats and oils - Determination of colour
67.200.10 BS 684 : Section 1.14 : 1987
SS 00011-04 1994   SS 11 : Part 4 : 1994 [Not Available]
Methods of sampling and tests for fats and oils - Determination of refractive index
67.200.10;
71.040.40
Identical adoption of ISO 6320 : 1995
SS 00011-05 1994   SS 11 : Part 5 : 1994 [Not Available]
Methods of sampling and tests for fats and oils - Determination of litre weight in air
67.200.10 BS 684 : Section 1.1 : 1985
SS 00011-06 1994   SS 11 : Part 6 : 1994 [Not Available]
Methods of sampling and tests for fats and oils - Determination of moisture and other volatile matter
67.200.10 BS 684 : Section 1.10 : 1982 (1988)
SS 00011-07 1994   SS 11 : Part 7 : 1994 [Not Available]
Methods of sampling and tests for fats and oils - Determination of insoluble impurities
67.200.10 Identical adoption of ISO 663 : 1992
SS 00011-08 1994   SS 11 : Part 8 : 1994 [Not Available]
Methods of sampling and tests for fats and oils - Determination of alkalinity
67.200.10 BS 684 : Section 2.5 : 1989
SS 00011-09 1994   SS 11 : Part 9 : 1994 [Not Available]
Methods of sampling and tests for fats and oils - Determination of acid value and of acidity
67.200.10 Identical adoption of ISO 660 : 1983
SS 00011-10 1994   SS 11 : Part 10 : 1994 [Not Available]
Methods of sampling and tests for fats and oils - Determination of iodine value
67.200.10 Identical adoption of ISO 3961 : 1989
SS 00011-11 1994   SS 11 : Part 11 : 1994 [Not Available]
Methods of sampling and tests for fats and oils - Determination of saponification value
67.200.10 Identical adoption of ISO 3657 : 1988
SS 00011-12 1994   SS 11 : Part 12 : 1994 [Not Available]
Methods of sampling and tests for fats and oils - Determination of unsaponifiable matter
67.200.10 Identical adoption of ISO 3596-1 : 1988
SS 00011-13 1994   SS 11 : Part 13 : 1994 [Not Available]
Methods of sampling and tests for fats and oils - Determination of volatile acids (Reichert and Polenske values)
67.200.10 BS 684 : Section 2.11 : 1976
SS 00011-14 1986   SS 11 : Part 14 : 1986 Methods of sampling and tests for fats and oils - Determination of Arachidic acid (Evers' test) 67.200.10  
SS 00011-15 1994   SS 11 : Part 15 : 1994 [Not Available]
Methods of sampling and tests for fats and oils - Determination of peroxide value
67.200.10 Identical adoption of ISO 3960 : 1977
SS 00011-16 1994   SS 11 : Part 16 : 1994 [Not Available]
Methods of sampling and tests for fats and oils - Determination of melting point in open capillary tubes (slip point)
67.200.10 Identical adoption of ISO 6321 : 1991
SS 00011-17 1994   SS 11 : Part 17 : 1994 [Not Available]
Methods of sampling and tests for fats and oils - Cold test
67.200.10 AOCS Official Method Cc 11-53 (1989)
SS 00011-18 1994   SS 11 : Part 18 : 1994 [Not Available]
Methods of sampling and tests for fats and oils - Preparation of methyl esters of fatty acids
67.200.10 BS 684 : Section 2.34 : 1980
SS 00011-19 1994   SS 11 : Part 19 : 1994 [Not Available]
Methods of sampling and tests for fats and oils - Analysis by gas chromatography of methyl esters of fatty acids
67.200.10 Identical adoption of ISO 5508 : 1990
SS 00011-20 1994   SS 11 : Part 20 : 1994 [Not Available]
Methods of sampling and tests for fats and oils - Cloud point test
67.200.10 AOCS Official Method Cc 6-25 (1989)
SS 00011-21 1994   SS 11 : Part 21 : 1994 Methods of sampling and tests for fats and oils - Determination of arsenic by atomic absorption spectrophotometry 67.200.10  
SS 00011-22 1994   SS 11 : Part 22 : 1994 [Not Available]
Methods of sampling and tests for fats and oils - Determination of lead by direct graphite furnace atomic absorption spectrometry
67.200.10 AOCS Official Method Ca 18c-91 (1992)
SS 00011-23 1994   SS 11 : Part 23 : 1994 [Not Available]
Methods of sampling and tests for fats and oils - Determination of copper by direct graphite furnace atomic absorption spectrometry
67.200.10 AOCS Official Method Ca 18b-91 (1992)
SS 00012 1995   SS 12 : 1995 Groundnut (peanut) oil 67.200.10  
SS 00013 1995   SS 13 : 1995 Coconut oil 67.200.10  
SS 00014 1982   SS 14 : 1982 [withdrawn]
Tungsten filament lamps for general service
  IEC 60064 : 1973
SS 00015 1970   SS 15 : 1970 [withdrawn]
Alternating current electric ceiling fans and regulators
   
SS 00016 1985   SS 16 : 1985 W C seats (plastics)
Amendment No. 1, April 1988
Amendment No. 2, March 1998
Confirmed 1998
91.140.70  
SS 00017 1996   SS 17 : 1996 Steel tubes suitable for screwing to BS 21 pipe threads 23.040.10  
SS 00018-01 1999   SS 18 : Part 1 : 1999 Cold-reduced steel wire for the reinforcement of concrete and the manufacture of welded fabric - Steel grade 500 77.140.65  
SS 00018-02 1970   SS 18 : Part 2 : 1970 Cold-reduced steel wire for the reinforcement of concrete and the manufacture of welded fabric - Steel grade 485
Amendment No. 1, September 1975
Amendment No. 2, February 1978
Erratum No. 1, June 2000
Amendment No. 3, August 2000
Confirmed 1981
77.140.65  
SS 00019 1970   SS 19 : 1970 [withdrawn]
Lead-acid starter batteries
29.220.20  
SS 00020 1970   SS 20 : 1970 [withdrawn]
Containers and cell covers for lead-acid batteries
29.220.20  
SS 00021 1970   SS 21 : 1970 [withdrawn]
Separators for lead-acid batteries
29.220.20  
SS 00022 1979   SS 22 : 1979 Pressed steel sectional rectangular tanks
Amendment No. 1, September 1980
Amendment No. 2, November 1998
23.020.10  
SS 00023 1995   SS 23 : 1995 [Not Available]
Ceiling roses
Amendment No. 1, September 1995
29.020 BS 67 : 1987
SS 00024 1987   SS 24 : 1987 [withdrawn => SS 490, SS 491]
Ballasts for fluorescent lamps on a.c. 50 Hz supplies
29.140.30  
SS 00025 1970   SS 25 : 1970 [withdrawn]
Matches
   
SS 00026 2000   SS 26 : 2000 Ordinary Portland cement 91.100.10  
SS 00027 1970   SS 27 : 1970 [withdrawn]
Trimmed sizes of writing paper and certain classes of printed matter
   
SS 00028 1970   SS 28 : 1970 [withdrawn]
Sizes of correspondence envelopes and pockets
   
SS 00029 1970   SS 29 : 1970 Method for expression of dimensions of processed writing paper and certain classes of printed matter    
SS 00030 1999   SS 30 : 1999 Manhole tops and surface-box tops 93.080.30  
SS 00031 1998   SS 31 : 1998 Aggregates from natural sources for concrete
Erratum No. 1, October 1998
91.100.30  
SS 00032-01 1999   SS 32 : Part 1 : 1999 Welded steel fabric for the reinforcement of concrete - Steel grades 300 and 500
Erratum No. 1, January 2000
Erratum No. 2, August 2000
77.140.15  
SS 00032-02 1986   SS 32 : Part 2 : 1986 Welded steel fabric for the reinforcement of concrete - Steel grade 485
Erratum No. 1, June 2000
Amendment No. 1, August 2000
77.140.15  
SS 00033 1975   SS 33 : 1975 Cast iron spigot and socket soil, waste and ventilating pipes (sand cast and spun) and fitting 23.040.10;
23.120
 
SS 00034 1998   SS 34 : 1998 Undercoat paint for gloss enamel
Amendment No. 1, March 2001
87.040.10  
SS 00035 1971   SS 35 : 1971 Toilet soap
Amendment No. 1, July 1983
Amendment No. 2, August 1994
Confirmed 1994
71.100.70  
SS 00036 1971   SS 36 : 1971 Aluminium sulphate
Amendment No. 1, May 1978
Confirmed 1981
13.060;
71.060
 
SS 00037 1998   SS 37 : 1998 Aluminium paint 87.040.10  
SS 00038 1998   SS 38 : 1998 Aluminium wood primer 87.040.20  
SS 00039 1971   SS 39 : 1971 Sodium hydroxide (caustic soda), technical
Confirmed 1981
71.060.40  
SS 00040 1988   SS 40 : 1988 Metal sinks for domestic purposes 97.040.10  
SS 00041 1971   SS 41 : 1971 [withdrawn]
Toilet rolls
   
SS 00042 1971   SS 42 : 1971 Quality of vitreous china sanitary appliances
Amendment No. 1, November 1983
Amendment No. 2, August 1996
Confirmed 1996
91.140.70  
SS 00043 1971   SS 43 : 1971 [withdrawn]
Domestic refuse-bins made from galvanized or ungalvanized mild steel
   
SS 00044 1980   SS 44 : 1980 [withdrawn]
Steel filing cabinets
   
SS 00045 1971   SS 45 : 1971 [withdrawn]
PVC garden hose
   
SS 00046 1971   SS 46 : 1971 Wheat flour (white)
Amendment No. 1, March 1985
Amendment No. 2, August 1991
Confirmed 1991
67.060  
SS 00047 1997   SS 47 : 1997 Margarine 67.200.10  
SS 00048 1971   SS 48 : 1971 [withdrawn => SS 204]
Covered electrodes for the manual metal-arc welding of mild steel and medium tensile steel
  BS 639: 1972
SS 00049 1971   SS 49 : 1971 [withdrawn => SS 204]
CIassification and coding of covered electrodes for metal-arc welding
  BS 1719: Part 1: 1969
SS 00050 1981   SS 50 : 1981 [withdrawn => SS 358]
PVC insulated cables (non-armoured) for electric power and lighting
   
SS 00051 1971   SS 51 : 1971 [withdrawn => CP 2]
Code of practice for installation, operation and maintenance of electric passengers and goods lifts
   
SS 00052 1977   SS 52 : 1977 [withdrawn => SS ISO 1000:1992]
Rules for the use of units of the International System (Sl)
   
SS 00053 1971   SS 53 : 1971 [withdrawn]
Guide for inter-conversion of values from one system of units to another
   
SS 00054 1971   SS 54 : 1971 [withdrawn]
Method of precise conversion of inch and metric dimensions to ensure inter-changeability
   
SS 00055 1971   SS 55 : 1971 [withdrawn => SS478]
Conversion factors and tables
   
SS 00056 1971   SS 56 : 1971 The use of the metric system in the building industry
Confirmed 1981
01.060  
SS 00057 1989   SS 57 : 1989 [withdrawn => SS 483:2000]
Glazed ceramic tiles and tile fittings for internal walls
   
SS 00058 1972   SS 58 : 1972 [withdrawn]
Asbestos cement flat and corrugated sheets
   
SS 00059 1972   SS 59 : 1972 [withdrawn]
Alternating current electric table type and pedestal type fans
   
SS 00060 1972   SS 60 : 1972 [withdrawn]
Enamelled copper conductors
  BS 3188 : Part 1 : 1960
SS 00060M 1972   SS 60M : 1972 [withdrawn]
Enamelled copper conductors
  BS 4520 : Part 1 : 1969
SS 00061 1972   SS 61 : 1972 Monosodium glutamate for seasoning
Confirmed 1983
67.220.20  
SS 00062 1997   SS 62 : 1997 Carbonated and non-carbonated beverages 67.160.20  
SS 00063 1972   SS 63 : 1972 [withdrawn]
Boots combat, direct vulcanized process
   
SS 00064 1972   SS 64 : 1972 [withdrawn]
Nylon boot and shoe laces, coreless
   
SS 00065 1972   SS 65 : 1972 [withdrawn]
Methods of test for coated fabrics
   
SS 00066 1972   SS 66 : 1972 [withdrawn]
GIossary of footwear terms
   
SS 00067 1972   SS 67 : 1972 [withdrawn]
Polyvinylchloride coated fabrics
   
SS 00068 1984   SS 68 : 1984 [withdrawn]
WC flushing cisterns, including dual flush cisterns and flush pipes
Amendment No. 1, November 1986
Amendment No. 2, September 1995
91.140.60  
SS 00069 1981   SS 69 : 1981 Floats (plastic) for float operated valves for cold water cisterns
Amendment No. 1, August 1996
Confirmed 1996
Amendment No. 2, May 2003
23.060  
SS 00070 2001   SS 70 : 2001 Clay roofing tiles and fittings 91.100.25  
SS 00071 1972   SS 71 : 1972 Nomenclature of commercial timbers 01.040.79;
79.040
 
SS 00072 1988   SS 72 : 1988 Treatment of timber and plywood with copper/chrome/arsenic wood preservatives
Erratum No. 1, May 1989
71.100.50;
79.020
 
SS 00073-00 1992   SS 73 : Part 0 : 1992 Methods of sampling and testing of mineral aggregates, sand and fillers - General requirements for apparatus and calibration 91.100.20  
SS 00073-01 1992   SS 73 : Part 1 : 1992 Methods of sampling and testing of mineral aggregates, sand and fillers - Guide to sampling and testing aggregates 91.100.20  
SS 00073-03-02 1992   SS 73 : Part 3.2 : 1992 Methods of sampling and testing of mineral aggregates, sand and fillers - Sedimentation test 91.100.20;
19.120
 
SS 00073-05-01 1992   SS 73 : Part 5.1 : 1992 Methods of sampling and testing of mineral aggregates, sand and fillers - Method for determination of particle shape - Flakiness index 91.100.20  
SS 00073-06 1992   SS 73 : Part 6 : 1992 Methods of sampling and testing of mineral aggregates, sand and fillers - Methods for determination of shell content 91.100.20  
SS 00073-17 1992   SS 73 : Part 17 : 1992 Methods of sampling and testing of mineral aggregates, sand and fillers - Methods for determination of water-soluble chloride salts 91.100.20;
71.040.40
 
SS 00073-18 1992   SS 73 : Part 18 : 1992 Methods of sampling and testing of mineral aggregates, sand and fillers - Methods for determination of sulphate content 91.100.20;
71.040.40
 
SS 00073-19 1992   SS 73 : Part 19 : 1992 Methods of sampling and testing of mineral aggregates, sand and fillers - Methods for determination of acid-soluble material in fine aggregate 91.100.15  
SS 00073-20 1992   SS 73 : Part 20 : 1992 Methods of sampling and testing of mineral aggregates, sand and fillers - Methods for testing and classifying drying shrinkage of aggregates in concrete 91.100.20;
91.100.30
 
SS 00073-21 1992   SS 73 : Part 21 : 1992 Methods of sampling and testing of mineral aggregates, sand and fillers - Method for determination of soundness 91.100.20  
SS 00074 1994   SS 74 : 1994 [[withdrawn => refer directly to ISO 3310 comprising 3 parts]
Test sieves
19.120  
SS 00075-01 1972   SS 75 : Part 1 : 1972 [withdrawn]
Draw-off taps and stopvalves for water services (screw-down pattern) - Imperial units
  BS 1010 : Part 1 : 1959
SS 00075-02 1978   SS 75 : Part 2 : 1978 [Not Available]
Draw-off taps and stopvalves for water services (screw-down pattern) - Draw-off taps and above-ground stopvalves
Amendment No. 1, February 1996
91.140.70 BS 1010 : Part 2 : 1973
SS 00076 1972   SS 76 : 1972 [withdrawn]
Precast concrete blocks
   
SS 00076M 1975   SS 76M : 1975 Precast concrete blocks (Metric)
Addendum No. 1, April 1980
Erratum No. 1, April 1980
Confirmed 1990
91.100.30  
SS 00077 1972   SS 77 : 1972 [withdrawn]
Asbestos cement pressure pipes
   
SS 00078-05 1972   SS 78 : Part 5 : 1972 [Not Available]
Testing concrete - Methods of testing hardened concrete for other than strength
91.100.30 BS 1881 : Part 5 : 1970
SS 00078-A01 1987   SS 78 : Part A1 : 1987 Testing concrete - Method of sampling fresh concrete on site 91.100.30  
SS 00078-A02 1987   SS 78 : Part A2 : 1987 Testing concrete - Method for determination of slump 91.100.30  
SS 00078-A03 1987   SS 78 : Part A3 : 1987 Testing concrete - Method for determination of compacting factor 91.100.30  
SS 00078-A04 1987   SS 78 : Part A4 : 1987 Testing concrete - Method for determination of Vebe time 91.100.30  
SS 00078-A05 1987   SS 78 : Part A5 : 1987 Testing concrete - Method for determination of flow 91.100.30  
SS 00078-A06 1987   SS 78 : Part A6 : 1987 Testing concrete - Method for determination of air content of fresh concrete 91.100.30  
SS 00078-A07 1987   SS 78 : Part A7 : 1987 Testing concrete - Method for determination of density of compacted fresh concrete 91.100.30  
SS 00078-A08 1987   SS 78 : Part A8 : 1987 Testing concrete - Method for making test cubes from fresh concrete 91.100.30  
SS 00078-A09 1987   SS 78 : Part A9 : 1987 Testing concrete - Method for making test beams from fresh concrete 91.100.30  
SS 00078-A10 1987   SS 78 : Part A10 : 1987 Testing concrete - Method for making test cylinders from fresh concrete 91.100.30  
SS 00078-A11 1987   SS 78 : Part A11 : 1987 Testing concrete - Method of normal curing of test specimens (27oC method) 91.100.30  
SS 00078-A12 1987   SS 78 : Part A12 : 1987 Testing concrete - Methods for accelerated curing of test cubes 91.100.30  
SS 00078-A13 1987   SS 78 : Part A13 : 1987 Testing concrete - Method for making and curing no fines test cubes 91.100.30  
SS 00078-A14 1987   SS 78 : Part A14 : 1987 Testing concrete - Methods for determination of density of hardened concrete 91.100.30  
SS 00078-A15 1987   SS 78 : Part A15 : 1987 Testing concrete - Specification for compression testing machines for concrete 91.100.30  
SS 00078-A16 1987   SS 78 : Part A16 : 1987 Testing concrete - Method for determination of compressive strength of concrete 91.100.30  
SS 00078-A17 1987   SS 78 : Part A17 : 1987 Testing concrete - Method for determination of tensile splitting strength 91.100.30  
SS 00078-A18 1987   SS 78 : Part A18 : 1987 Testing concrete - Method for determination of flexural strength 91.100.30  
SS 00078-A19 1987   SS 78 : Part A19 : 1987 Testing concrete - Method for determination of compressive strength using portions of beams broken in flexure (equivalent cube method) 91.100.30  
SS 00078-A20 1987   SS 78 : Part A20 : 1987 Testing concrete - Method for determination of the compressive strength of concrete cores 91.100.30  
SS 00078-A21 1987   SS 78 : Part A21 : 1987 Testing concrete - Method for determination of static modules of elasticity in compression 91.100.30  
SS 00078-A22 1987   SS 78 : Part A22 : 1987 Testing concrete - Method for determination of water absorption 91.100.30  
SS 00078-A24 1991   SS 78 : Part A24 : 1991 Testing concrete - Methods of analysis of hardened concrete 91.100.30  
SS 00078-A25 1987   SS 78 : Part A25 : 1987 Testing concrete - Methods for mixing and sampling fresh concrete in the laboratory 91.100.30  
SS 00078-A27 1992   SS 78 : Part A27 : 1992 Testing concrete - Method of verifying the performance of a concrete cube compression machine using the comparative cube test 91.100.30  
SS 00078-A29 1994   SS 78 : Part A29 : 1994 Testing concrete - Method for determination of density of partially compacted semi-dry fresh concrete 91.100.30  
SS 00078-B01 1992   SS 78 : Part B1 : 1992 Testing concrete - Guide to the use of non-destructive methods of test for hardened concrete 91.100.30  
SS 00078-B02 1992   SS 78 : Part B2 : 1992 Testing concrete - Recommendations for surface hardness testing by rebound hammer 91.100.30  
SS 00078-B03 1992   SS 78 : Part B3 : 1992 Testing concrete - Recommendations for measurement of velocity of ultrasonic pulses in concrete 91.100.30  
SS 00078-B04 1992   SS 78 : Part B4 : 1992 Testing concrete - Recommendations for the use of electromagnetic covermeters 91.100.30  
SS 00078-B05 1992   SS 78 : Part B5 : 1992 Testing concrete - Recommendations for radiography of concrete 91.100.30  
SS 00078-B06 1992   SS 78 : Part B6 : 1992 Testing concrete - Recommendations for determination of strain in concrete 91.100.30  
SS 00078-B07 1992   SS 78 : Part B7 : 1992 Testing concrete - Recommendations for assessment of concrete strength by the near-to-surface tests 91.100.30  
SS 00078-B09 1992   SS 78 : Part B9 : 1992 Testing concrete - Recommendations for the measurement of dynamic modulus of elasticity 91.100.30  
SS 00079 1980   SS 79 : 1980 [withdrawn]
PVC insulation and sheath of electric cables
  BS 6746 : 1976
SS 00080 1972   SS 80 : 1972 [withdrawn => SS291]
Copper conductors in insulated cables and cords
  BS 6360: 1969
SS 00081-01 1990   SS 81 : Part 1 : 1990 [Not Available => See SS IEC 60384-4:1985]
Aluminium electrolytic capacitors - Specification for aluminium electrolytic capacitors with solid and non-solid electrolyte
   
SS 00081-02 1990   SS 81 : Part 2 : 1990 [Not Available => See SS IEC 60384-4-1:1985]
Aluminium electrolytic capacitors - Blank detail specification: Aluminium electrolytic capacitors with non-solid electrolyte - Assessment level E
   
SS 00081-03 1990   SS 81 : Part 3 : 1990 [Not Available => See SS IEC 60384-4-2:1985]
Aluminium electrolytic capacitors - Blank detail specification : Aluminium electrolytic capacitors with solid electrolyte - Assessment level E
   
SS 00082 1972   SS 82 : 1972 Bitumen based primers for cold or hot application
Confirmed 1996
25.220.60;
75.140
 
SS 00083 1972   SS 83 : 1972 Hot applied bitumen based coatings for protection against corrosion
Confirmed 1996
25.220.60;
75.140
 
SS 00084 1972   SS 84 : 1972 Bitumen for road construction
Amendment No. 1, March 1989
Confirmed 1996
93.080.20;
75.140
 
SS 00085 1990   SS 85 : 1990 Bitumen emulsion for road construction
Confirmed 1996
75.140;
93.080.20
 
SS 00086 1988   SS 86 : 1988 Methods of sampling and testing bitumens
Amendment No. 1, November 1996
Confirmed 1996
   
SS 00087 1974   SS 87 : 1974 [withdrawn]
Cement paint
   
SS 00088 1978   SS 88 : 1978 [Not Available]
Mineral solvents (white spirit and related hydrocarbon solvents) for paints and other purposes
Amendment No. 1, April 1978
87.060.30 BS 245 : 1976
SS 00089 1981   SS 89 : 1981 [Not Available => See SS ISO 3262:1975]
Extenders for paints
   
SS 00090 1995   SS 90 : 1995 [withdrawn => Refer directly to ISO 4618:1998]
Glossary of paint and related terms
01.040.87 BS 2015 : 1992
SS 00091 1995   SS 91 : 1995 [Not Available]
Solvent-based paint remover
87.060.30 BS 3761 : 1986
SS 00092 1981   SS 92 : 1981 [Not Available => See SS ISO 1248:1974]
Iron oxide pigments for paints
   
SS 00093 1972   SS 93 : 1972 [withdrawn]
AIuminium conductors in insulated cables
  BS 6791 : 1969
SS 00094 1972   SS 94 : 1972 White refined sugar
Amendment No. 1, December 1992
Erratum No. 1, July 1994
Confirmed 1992
67.180.10  
SS 00095 1997   SS 95 : 1997 Butter 67.100.20  
SS 00096 1974   SS 96 : 1974 [withdrawn]
Automotive leaf springs
   
SS 00097-01 2000   SS 97 : Part 1 : 2000 Residual current operated circuit-breaker without integral overcurrent protection for household and similar uses (RCCBs) 29.130 Modified adoption of IEC 61008-1 : 1996
SS 00098 1997   SS 98 : 1997 [withdrawn]
Industrial safety helmets
13.340.10  
SS 00098 2005 SS 98 : 2005 Industrial safety helmets 13.340.10  
SS 00099 1998   SS 99 : 1998 Welded low carbon steel cylinders for storage and transportation of compressed liquefied gases
Erratum No. 1, May 2001
75.180.99;
77.140.01
Modified adoption of ISO 4706 : 1989
Sort Mk 規格番号 Top規格名称(英語) 国際規格分類
( ICSコードの説明 )
国際整合
( IDT,MOD,NEQ等の説明 )
SS 00100 1974   SS 100 : 1974 [withdrawn => SS 504 Part 21:2003]
Rigid steel conduits for electrical installations
29.120.10  
SS 00101 1999   SS 101 : 1999 Protection of persons and equipment by enclosures - Probes for verification
Erratum No. 1, February 2003
13.260;
29.020
Identical adoption of IEC 61032 : 1997
SS 00102 1996   SS 102 : 1996 Valves and safety valves for land boilers, steam vessels and piping installations 23.060.
40.40
 
SS 00103 1974   SS 103 : 1974 Burnt clay and shale bricks 91.100.15  
SS 00104 1996   SS 104 : 1996 Cold-formed steel sections for general structures 91.080.10;
77.080.20
 
SS 00105 1997   SS 105 : 1997 Safety footwear 13.340.10  
SS 00106 1974   SS 106 : 1974 [withdrawn]
Stencil paper
   
SS 00107 1974   SS 107 : 1974 [withdrawn]
Duplicating ink for twin cylinder rotary machines
   
SS 00108 1974   SS 108 : 1974 Polyvinyl chloride resins 83.080.20  
SS 00109 1974   SS 109 : 1974 Bitumen-based filling compounds for electrical purposes
Confirmed 1998
29.040;
75.140
 
SS 00110 1974   SS 110 : 1974 Ethanol 71.080.60  
SS 00111 1974   SS 111 : 1974 Sodium silicates 71.060.50  
SS 00113 1995   SS 113 : 1995 Glucose syrup 67.180.20  
SS 00114 1974   SS 114 : 1974 Evaporated milk
Amendment No. 1, September 1976
Amendment No. 2, November 1981
Amendment No. 3, February 1994
67.100.10  
SS 00115 1995   SS 115 : 1995 Cordials 67.160.20  
SS 00116 1975   SS 116 : 1975 [withdrawn]
PVC (Vinyl) asbestos floor tiles
   
SS 00117 1975   SS 117 : 1975 Hot dip galvanized coatings on iron and steel articles 25.220.40;
77.120.60
 
SS 00118 1980   SS 118 : 1980 Steel windows and doors for domestic and similar buildings 91.060.50;
77.140.20
 
SS 00119 1975   SS 119 : 1975 [withdrawn => SS 289]
Ready-mixed concrete
   
SS 00120 1975   SS 120 : 1975 [withdrawn => SS 497]
Electric overhead travelling cranes
53.020.20  
SS 00121 1975   SS 121 : 1975 [withdrawn]
Lampholders and startholders for tubular fluorescent lamps
   
SS 00122 1979   SS 122 : 1979 [withdrawn]
Tubular fluorescent lamps for general lighting service
   
SS 00123 1977   SS 123 : 1977 [withdrawn]
Capacitors for use in tubular fluorescent, high pressure mercury and low pressure sodium vapour lamp circuits
   
SS 00124 1975   SS 124 : 1975 [withdrawn]
Glow starters for tubular fluorescent lamps operating on a.c. 50 Hertz supplies
   
SS 00125 2001   SS 125 : 2001 [Not Available]
Bayonet lampholders
29.140.10 Identical adoption of IEC 61184 : 1997-08
SS 00126 1975   SS 126 : 1975 [withdrawn => SS 471]
Screw lamp-caps and lampholders (Edison type) for voltages not exceeding 250 volts
   
SS 00127 1975   SS 127 : 1975 [withdrawn => SS 146 Part 2 - 8]
Mains pressure automatic electric storage water heaters
   
SS 00128 1975   SS 128 : 1975 [Not Available]
Liquid carbon dioxide, industrial
Amendment No. 1, July 1975
71.100.20 BS 4105 : 1967
SS 00129 1975   SS 129 : 1975 [Not Available]
Industrial nitrogen
71.100.20 BS 4366 : 1968
SS 00130 2001   SS 130 : 2001 Sulphuric acid 71.060.30  
SS 00131 1975   SS 131 : 1975 Liquid chlorine 71.060.10  
SS 00132 1975   SS 132 : 1975 Oleum 71.060.30  
SS 00133 1987   SS 133 : 1987 Bituminous emulsion for roof waterproofing
Amendment No. 1, August 1989
Confirmed 1998
91.120.30;
75.140;
91.060.20
 
SS 00134 1995   SS 134 : 1995 Refined, deodorized and winterized corn (or maize) oil 67.200.10  
SS 00135 1995   SS 135 : 1995 Refined and deodorized soya bean oil 67.200.20  
SS 00136 1975   SS 136 : 1975 [withdrawn]
Standard atmospheres for conditioning and testing of textile materials
   
SS 00137 1975   SS 137 : 1975 [withdrawn]
Determination of linear density of yarns by the skein method
   
SS 00138 1975   SS 138 : 1975 [withdrawn]
Determination of breaking load and elongation at the breaking load of single strands of yarn
   
SS 00139 1975   SS 139 : 1975 [withdrawn]
Determination of twist in yarns by direct-counting method
   
SS 00140 1975   SS 140 : 1975 [withdrawn]
Determination of lea strength and lea count of spun yarns
   
SS 00141 1976   SS 141 : 1976 Unplasticized PVC pipe for cold water services and industrial uses
Amendment No. 1, February 1996
23.040.20;
91.140.60
 
SS 00142 1976   SS 142 : 1976 Steel pipes, fittings and specials for water, gas and sewage
Amendment No. 1, September 1977
Erratum No. 1, July 1979
23.040.10;
23.040.40;
91.140
 
SS 00143 2000   SS 143 : 2000 Audio, video and similar electronic apparatus - Safety requirements 97.020 Identical adoption of IEC 60065 : 1998-07
SS 00144-01 1997   SS 144 : Part 1 : 1997 Switches for appliances - General requirements 29.120.40 Identical adoption of IEC 61058-1 : 1996
SS 00145-01 1997   SS 145 : Part 1 : 1997 13A plugs and socket outlets - Rewirable and non-rewirable 13A fused plugs 29.120.30  
SS 00145-02 1997   SS 145 : Part 2 : 1997 13A plugs and socket outlets - 13A switched and unswitched socket-outlets
Amendment No. 1, April 1999
Erratum No. 1, October 2001
29.120.30  
SS 00146-01 1994   SS 146 : Part 1 : 1994 [withdrawn?]
Safety of household and similar electrical appliances - General requirements
Amendment No. 1, November 1996
Amendment No. 2, March 1999
Amendment No. 3, February 2000
13.120;
97.030
Modified adoption of IEC 60335-1 : 1991
SS 00146-01 2004   SS 146 : Part 1 : 2004 Safety of household and similar electrical appliances - General requirements 13.120;
97.030
Identical adoption of IEC 60335-1 : 2001
SS 00146-02-01 1996   SS 146 : Part 2 : 1 : 1996 Safety of household and similar electrical appliances - Particular requirements for electric irons
Amendment No. 1, October 1999
97.060 Identical adoption of IEC 60335-2-3 : 1993
SS 00146-02-02 1997   SS 146 : Part 2 : 2 : 1997 Safety of household and similar electrical appliances - Particular requirements for appliances for heating liquid 97.040.50 Identical adoption of IEC 60335-2-15 : 1995
SS 00146-02-03 1995   SS 146 : Part 2 : 3 : 1995 Safety of household and similar electrical appliances - Particular requirements for washing machines
Amendment No. 1, October 1999
97.060 Modified adoption of IEC 60335-2-7 : 1993
SS 00146-02-04 1996   SS 146 : Part 2 : 4 : 1996 Safety of household and similar electrical appliances - Particular requirements for vacuum cleaners and water suction cleaning appliances
Amendment No. 1, October 1999
97.080 Identical adoption of IEC 60335-2-2 : 1993
SS 00146-02-05 1999   SS 146 : Part 2 : 5 : 1999 Safety of household and similar electrical appliances - Particular requirements for instantaneous water heaters 13.120;
97.040.50
Modified adoption of IEC 60335-2-35 : 1997
SS 00146-02-06 1986   SS 146 : Part 2 : 6 : 1986 [withdrawn => SS 146 Part 2-16]
Safety of household and similar electrical appliances - Particular requirements for room air conditioners
   
SS 00146-02-07 1999   SS 146 : Part 2 : 7 : 1999 Safety of household and similar electrical appliances - Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances 13.120;
91.040.20
Identical adoption of IEC 60335-2-6 : 1997-05
SS 00146-02-08 1999   SS 146 : Part 2 : 8 : 1999 Safety of household and similar electrical appliances - Particular requirements for storage water heaters 13.120;
91.140.65
Modified adoption of IEC 60335-2-21 : 1997-08
SS 00146-02-09 1997   SS 146 : Part 2 : 9 : 1997 Safety of household and similar electrical appliances - Particular requirements for appliances for skin or hair care 97.170 Identical adoption of IEC 60335-2-23 : 1996
SS 00146-02-10 1998   SS 146 : Part 2 : 10 : 1998 Safety of household and similar electrical appliances - Particular requirements for microwave ovens 97.040.20 Identical adoption of IEC 60335-2-25 : 1996
SS 00146-02-11 1995   SS 146 : Part 2 : 11 : 1995 Safety of household and similar electrical appliances - Particular requirements for spin extractors
Amendment No. 1, October 1999
97.060 Identical adoption of IEC 60335-2-4 : 1993
SS 00146-02-12 1996   SS 146 : Part 2 : 12 : 1996 Safety of household and similar electrical appliances - Particular requirements for tumbler dryers
Amendment No. 1, October 1999
97.060 Identical adoption of IEC 60335-2-11 : 1993
SS 00146-02-13 1998   SS 146 : Part 2 : 13 : 1998 Safety of household and similar electrical appliances - Particular requirements for kitchen machines 97.040.50 Identical adoption of IEC 60335-2-14 : 1994
SS 00146-02-14 1998   SS 146 : Part 2 : 14 : 1998 Safety of household and similar electrical appliances - Particular requirements for portable immersion heaters 97.040.50 Identical adoption of IEC 60335-2-74 : 1994
SS 00146-02-15 1998   SS 146 : Part 2 : 15 : 1998 Safety of household and similar electrical appliances - Particular requirements for toasters, grills, roasters and similar appliances 97.040.50 Identical adoption of IEC 60335-2-9 : 1993
SS 00146-02-16 1998   SS 146 : Part 2 : 16 : 1998 Safety of household and similar electrical appliances - Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers 23.120 Identical adoption of IEC 60335-2-40 : 1995
SS 00146-02-17 1998   SS 146 : Part 2 : 17 : 1998 Safety of household and similar electrical appliances - Particular requirements for refrigerating appliances and ice-makers 97.040.30 Modified adoption of IEC 60335-2-24 : 1997
SS 00146-02-18 2000   SS 146 : Part 2 : 18 : 2000 Safety of household and similar electrical appliances - Particular requirements for fan 23.120 Modified adoption of IEC 60335-2-80 : 1997-04
SS 00146-02-19 2000   SS 146 : Part 2 : 19 : 2000 Safety of household and similar electrical appliances - Particular requirements for insect killers 13.120;
97.180
Identical adoption of IEC 60335-2-59 : 1997-10
SS 00147 1997   SS 147 : 1997 Vanaspati 67.2  
SS 00148 1976   SS 148 : 1976 Reconstituted or recombined milk
Amendment No. 1, January 1984
67.100.10  
SS 00149 1976   SS 149 : 1976 Electrolytic compressed hydrogen 71.060.10;
71.100.20
 
SS 00150 1998   SS 150 : 1998 Emulsion paints for decorative purposes
Erratum No. 1, September 1998
Erratum No. 2, November 1998
87.040  
SS 00151 1976   SS 151 : 1976 Industrial argon 71.060.10;
71.100.20
 
SS 00152 2003   SS 152 : 2003 Identification of contents of industrial gas containers 23.020.30  
SS 00153 1976   SS 153 : 1976 Industrial oxygen 71.060.10;
71.100.20
 
SS 00154 1976   SS 154 : 1976 Acetone 71.080.80  
SS 00155 1976   SS 155 : 1976 Dissolved acetylene (technical) 71.100.20  
SS 00156 1976   SS 156 : 1976 [withdrawn => SS 369:1994]
Moulded polyethylene plastics refuse bins
   
SS 00157 1976   SS 157 : 1976 [withdrawn]
Steel fabricated deck end rollers
Amendment No. 1, September 1987
Amendment No. 2, March 1998
47.020.50  
SS 00158 1976   SS 158 : 1976 [withdrawn]
Bollards
   
SS 00159 1998   SS 159 : 1998 [withdrawn]
Butterfly nuts for ships
47.020.05  
SS 00160 1998   SS 160 : 1998 [withdrawn]
Rope hole covers for ships
47.020.10  
SS 00161 1976   SS 161 : 1976 [withdrawn]
Light load derrick booms for ships
   
SS 00162 1998   SS 162 : 1998 [withdrawn]
Roller fairleads for ships
47.020.50  
SS 00163 1976   SS 163 : 1976 [withdrawn]
Simple type bollards
   
SS 00164 1998   SS 164 : 1998 [withdrawn]
Horizontal rollers for ships
47.020.50  
SS 00165 1998   SS 165 : 1998 [withdrawn]
Small size steel plate deck-end rollers
47.020.50  
SS 00166 1976   SS 166 : 1976 [withdrawn]
Small size roller fair-leads for ships
Amendment No. 1, September 1987
Amendment No. 2, March 1998
47.020.50  
SS 00167 1977   SS 167 : 1977 General purpose fuse links for domestic and similar purposes (primarily for use in plugs)
Amendment No. 1, September 1995
Confirmed 1995
29.120.50  
SS 00168 1977   SS 168 : 1977 [withdrawn]
Hatch wedges
Amendment No. 1, August 1978
47.020.50  
SS 00169 1977   SS 169 : 1977 [withdrawn]
Jibs for general use
   
SS 00170 1978   SS 170 : 1978 [withdrawn]
Melamine tableware
   
SS 00171 1977   SS 171 : 1977 Leading blocks for chain type hand steering gear    
SS 00172 1995   SS 172 : 1995 Vegetable cooking oil 67.200.10  
SS 00173 1977   SS 173 : 1977 Glossary of terms relating to timber and woodwork 01.040.79;
79.040
 
SS 00174 1977   SS 174 : 1977 Joints and fittings for use with unplasticized PVC pressure pipes
Amendment No. 1, June 1997
23.040.45;
83.140
 
SS 00175 1993   SS 175 : 1993 Non-refillable metal aerosol dispensers of 50 ml to 1400 ml capacity and up to 85 mm diameter
Amendment No. 1, February 1999
55.130  
SS 00176 1996   SS 176 : 1996 Portable aluminium ladder 97.145;
77.150.10
BS 2037 : 1994
SS 00177 1977   SS 177 : 1977 [withdrawn]
Publishers' catalogues
   
SS 00178 1977   SS 178 : 1977 [withdrawn]
Title leaves of books
   
SS 00179 1978   SS 179 : 1978 Peanut butter
Erratum No. 1, February 1979
67.080.10  
SS 00180 1978   SS 180 : 1978 [withdrawn]
Motor vehicle seat belt assemblies
   
SS 00181 1978   SS 181 : 1978 [withdrawn]
Luminaires (lighting fittings) for fluorescent lamps
   
SS 00182 1995   SS 182 : 1995 Refined and deodorized palm olein 67.200.10  
SS 00183 1978   SS 183 : 1978 Concrete cylindrical pipes and fittings including manholes and street gullies
Erratum No. 1, September 1980
Erratum No. 2, September 1998
91.140.80  
SS 00184 1978   SS 184 : 1978 [withdrawn]
Double-type cross-bitts for tug boats
47.020.50  
SS 00185 1996   SS 185 : 1996 [withdrawn]
Fittings for weather-tight steel doors for ships
47.020.10  
SS 00186 1978   SS 186 : 1978 ISO metric screw threads: basic profile, standard thread series and limits and tolerances for coarse pitch series and constant pitch series threads 21.040.10  
SS 00187 1978   SS 187 : 1978 [withdrawn]
Qualification test for manual metal-arc welders
Amendment No. 1, March 1990
25.160.10  
SS 00188 1978   SS 188 : 1978 [withdrawn => SS 146 Part 2-19]
Insect electrocutors
   
SS 00189 1978   SS 189 : 1978 [withdrawn]
Rubber stoppers and tubing of flexible materials for laboratory use
   
SS 00190 1978   SS 190 : 1978 Scouring powder
Amendment No. 1, August 1994
71.100.40  
SS 00191 1983   SS 191 : 1983 [withdrawn]
Latex foam rubber mattresses
   
SS 00192 1978   SS 192 : 1978 [withdrawn]
School chalks
   
SS 00193 1983   SS 193 : 1983 [Not Available => See SS ISO 128:1982]Technical drawings - General principles of presentation    
SS 00194 1989   SS 194 : 1989 Technical drawings - Dimensioning - General principles, definitions, methods of execution and special indications 01.100.20  
SS 00195 1983   SS 195 : 1983 [Not Available => See SS ISO 406:1982]
Technical drawings - Tolerancing of linear and angular dimension
   
SS 00196 1996   SS 196 : 1996 Technical drawings - Method of indicating surface texture
Amendment No. 1, February 1996
01.100.20 Modified adoption of ISO 1302 : 1992
SS 00197 1978   SS 197 : 1978 [Not Available => See SS ISO 2162:1973]
Technical drawings- Representation of springs
   
SS 00198 1978   SS 198 : 1978 [Not Available => See SS ISO 2203:1973]
Technical drawings - Conventional representation of gears
   
SS 00199 1978   SS 199 : 1978 [Not Available => See SS ISO 3098-1:1974]
Technical drawings - Lettering, currently used characters
   
Sort Mk 規格番号 Top規格名称(英語) 国際規格分類
( ICSコードの説明 )
国際整合
( IDT,MOD,NEQ等の説明 )
SS 00200 1985   SS 200 :1985 [Not Available => See SS ISO 2553]
Welded, brazed and soldered joints - Symbolic representation on drawings
   
SS 00201 1978   SS 201 : 1978 [withdrawn]
The marking and arrangement of switchgear busbars, main connections and small wiring
   
SS 00202-01 1992   SS 202 : Part 1 : 1992 [withdrawn => Refer directly to IEC 60617]
Graphical symbols for diagrams - Introduction
Amendment No. 1, September 1999
01.080.30;
29.020
 
SS 00202-02 1999   SS 202 : Part 2 : 1999 [withdrawn => Refer directly to IEC 60617]
Graphical symbols for diagrams - Symbol elements, qualifying symbols and other symbols having general application
01.080.30;
29.020
Identical adoption of IEC 60617-2 : 1996
SS 00202-03 1999   SS 202 : Part 3 : 1999 [withdrawn => Refer directly to IEC 60617]
Graphical symbols for diagrams - Conductors and connecting devices
01.080.30 Identical adoption of IEC 60617-3 : 1996
SS 00202-04 1999   SS 202 : Part 4 : 1999 [withdrawn => Refer directly to IEC 60617]
Graphical symbols for diagrams - Basic passive components
01.080.30 Identical adoption of IEC 60617-4 : 1996
SS 00202-05 1999   SS 202 : Part 5 : 1999 [withdrawn => Refer directly to IEC 60617]
Graphical symbols for diagrams - Semiconductors and electron tubes
01.080.30 Identical adoption of IEC 60617-5 : 1996
SS 00202-06 199   SS 202 : Part 6 : 1999 [withdrawn => Refer directly to IEC 60617]
Graphical symbols for diagrams - Production and conversion of electrical energy
01.080.30;
29.020
Identical adoption of IEC 60617-6 : 1996
SS 00202-07 1999   SS 202 : Part 7 : 1999 [withdrawn => Refer directly to IEC 60617]
Graphical symbols for diagrams - Switchgear, controlgear and protective devices
01.080.30;
29.130
Identical adoption of IEC 60617-7 : 1996
SS 00202-08 1999   SS 202 : Part 8 : 1999 [withdrawn => Refer directly to IEC 60617]
Graphical symbols for diagrams - Measuring instruments, lamps and signalling devices
01.080.30 Identical adoption of IEC 60617-8 : 1996
SS 00202-09 1999   SS 202 : Part 9 : 1999 Graphical symbols for diagrams - Telecommunications : Switching and peripheral equipment 01.080.30 Identical adoption of IEC 60617-9 : 1996
SS 00202-10 1999   SS 202 : Part 10 : 1999 [withdrawn => Refer directly to IEC 60617]
Graphical symbols for diagrams - Telecommunications : Transmission
01.080.30;
33.020
Identical adoption of IEC 60617-10 : 1996
SS 00202-11 1999   SS 202 : Part 11 : 1999 [withdrawn => Refer directly to IEC 60617]
Graphical symbols for diagrams - Architectural and topographical installation plans and diagrams
01.080.30;
29.020
Identical adoption of IEC 60617-11 : 1996
SS 00202-12 1999   SS 202 : Part 12 : 1999 [withdrawn => Refer directly to IEC 60617]
Graphical symbols for diagrams - Binary logic elements
01.080.30;
29.020
Identical adoption of IEC 60617-12 : 1997;
Erratum No. 1, January 2001
SS 00202-13 1999   SS 202 : Part 13 : 1999 [withdrawn => Refer directly to IEC 60617]
Graphical symbols for diagrams - Analogue elements
01.080.30;
31.260
Identical adoption of IEC 60617-13 : 1993
SS 00203 1978   SS 203 : 1978 [withdrawn]
Flexible polyurethane foam for seat cushioning and bedding
   
SS 00204 1978   SS 204 : 1978 [withdrawn]
Covered electrodes for the manual metal-arc welding of carbon and carbon manganese steels
25.160.20  
SS 00205 1978   SS 205 : 1978 [withdrawn]
Vitreous china washdown WC pans - Dimensions and functional requirements
   
SS 00206 1978   SS 206 : 1978 [withdrawn => SS494:2001]
Zinc chromate primer
Amendment No. 1, January 1981
25.220  
SS 00207 1979   SS 207 : 1979 [withdrawn]
Seat belt anchorage points
   
SS 00208 1979   SS 208 : 1979 [withdrawn]
Seats with integral seat belt anchorage points
   
SS 00209 1996   SS 209 : 1996 Battery operated emergency power supply for lighting, ventilation and alarm bell of lifts 29.160.40;
91.140.90
 
SS 00210 1979   SS 210 : 1979 [withdrawn => SS 402 Part 2]
Industrial safety belts and harnesses
   
SS 00211-01 1998   SS 211 : Part 1 : 1998 [withdrawn]
Weathertight steel doors for ships - Steel doors for ships of length below 90m
47.020  
SS 00211-02 1998   SS 211 : Part 2 : 1998 [withdrawn]
Weathertight steel doors for ships - Steel doors for ships of length equal to or more than 90m
   
SS 00212 2000   SS 212 : 2000 Aluminium alloy windows 91.060.50  
SS 00213 1998   SS 213 : 1998 Unplasticised PVC pipes and fittings for soil, waste and vent applications 83.140.30;
91.140.80
 
SS 00214 1999   SS 214 : 1999 Precast concrete kerbs and dividers 91.100.30;
93.080.30
 
SS 00215 1979   SS 215 : 1979 Adjustable galvanized steel louvre windows
Erratum No. 1, September 1980.
77.140;
91.060.50
 
SS 00216 1979   SS 216 : 1979 [withdrawn => SS 388]
Aluminium alloy side scuttles for ships
   
SS 00217 1996   SS 217 : 1996 Industrial safety signs 01.080.20  
SS 00218 1979   SS 218 : 1979 [withdrawn]
Enamelled round copper wires with a temperature index of 155
   
SS 00219 1979   SS 219 : 1979 Dried noodles and pasta products
Amendment No. 1, April 1988
67.06  
SS 00220 1995   SS 220 : 1995 Sesame oil 67.200.10  
SS 00221 2002   SS 221 : 2002 Road marking paint 87.040.10  
SS 00222 1979   SS 222 : 1979 Stainless steel slab urinals
Addendum No. 1, December 1982
Amendment No. 1, December 1982
Amendment No. 2, December 1982
Amendment No. 3, April 1986
77.140.20;
91.140.70
 
SS 00223 1979   SS 223 : 1979 [withdrawn => SS 474]
Safety requirements for children's toys and playthings
   
SS 00224 1979   SS 224 : 1979 [Not Available => SS ISO 2816:1973]
Fundamental characteristics of a system of shoe sizing to be known as Mondopoint
   
SS 00225 1979   SS 225 : 1979 [Not Available => SS ISO 3355:1975]
Shoe sizes - System of length grading (for use in the Mondopoint system)
   
SS 00226 1979   SS 226 : 1979 [Not Available => SS ISO 3844:1977]
Shoe sizes - Method of marking
   
SS 00227-01 2000   SS 227 : Part 1 : 2000 Switches for household and similar fixed-electrical installations - General requirements 29.120.40 Identical adoption of IEC 60669-1 : 2000-03
SS 00227-02-01 2000   SS 227 : Part 2 : 1 : 2000 Switches for household and similar fixed-electrical installations - Particular requirements for electronic switches 29.120.40 Identical adoption of IEC 60669-2-1 : 2000-04
SS 00228 1979   SS 228 : 1979 [withdrawn]
Children's restraining devices in motor vehicles
   
SS 00229 1979   SS 229 : 1979 [withdrawn => SS 388]
Bronze side scuttles for ships
   
SS 00230 1979   SS 230 : 1979 [withdrawn => SS 392]
Extruded aluminium alloy rectangular windows for ships
   
SS 00231 1980   SS 231 : 1980 Laundry detergent powder for household use in manual washing
Amendment No. 1, August 1994
71.100.40  
SS 00232-01 1999   SS 232 : Part 1 : 1999 Portable fire extinguishers - Description, duration of operation, Class A and B fire tests 13.220.10  
SS 00232-02 1999   SS 232 : Part 2 : 1999 Portable fire extinguishers - Tightness, dielectric test, tamping test, special provisions 13.220.10  
SS 00232-03 1999   SS 232 : Part 3 : 1999 Portable fire extinguishers - Construction, resistance to pressure, mechanical tests 13.220.10  
SS 00232-04 1999   SS 232 : Part 4 : 1999 Portable fire extinguishers - Charges, minimum required fire 13.220.10  
SS 00232-05 1999   SS 232 : Part 5 : 1999 Portable fire extinguishers - Specification and supplementary tests 13.220.10  
SS 00232-06 1999   SS 232 : Part 6 : 1999 Portable fire extinguishers - Provisions for the attestation of conformity of portable fire extinguishers in accordance with SS232 Parts 1 to Part 5 13.220.10  
SS 00233 1996   SS 233 : 1996 Flexible rubber tubing, rubber hose and rubber hose assemblies for use in LPG vapour phase installations
Amendment No. 1, January 2004
23.040.70  
SS 00234 1980   SS 234 : 1980 [withdrawn => SS 388]
Simple type fixed scuttles for ships
   
SS 00235 1980   SS 235 : 1980 [withdrawn => SS 392]
Extruded naval brass rectangular windows for ships
   
SS 00236 1980   SS 236 : 1980 [withdrawn => SS 358 Part5:1991]
Flexible cords
   
SS 00237 1980   SS 237 : 1980 Rice vermicelli 67.060  
SS 00238 1980   SS 238 : 1980 Tomato ketchup
Amendment No. 1, November 1998
67.080.20  
SS 00239 1980   SS 239 : 1980 Liquefied petroleum gas 75.160.30  
SS 00240 1980   SS 240 : 1980 [withdrawn]
Ropes made from natural and synthetic fibres
   
SS 00241 1996   SS 241 : 1996 General requirements for electrical accessories 19.080;
29.120
 
SS 00242 1980   SS 242 : 1980 [Not Available => SS ISO 2859:1974]
Sampling procedures and tables for inspection by attributes
   
SS 00243-01 1999   SS 243 : Part 1 : 1999 [withdrawn => Refer directly to ISO 4074:2002]
Rubber condoms - Requirements
11.200 Identical adoption of ISO 4074-1 : 1996
SS 00243-02 1999   SS 243 : Part 2 : 1999 [withdrawn => Refer directly to ISO 4074:2002]
Rubber condoms - Determination of length
11.200 Identical adoption of ISO 4074-2 : 1994
SS 00243-03 1999   SS 243 : Part 3 : 1999 [withdrawn => Refer directly to ISO 4074:2002]
Rubber condoms - Determination of width
11.200 Identical adoption of ISO 4074-3 : 1994
SS 00243-05 1999   SS 243 : Part 5 : 1999 [withdrawn => Refer directly to ISO 4074:2002]
Rubber condoms - Testing for holes - Water leak test
11.200 Identical adoption of ISO 4074-5 : 1996
SS 00243-06 1999   SS 243 : Part 6 : 1999 Rubber condoms - Determination of [withdrawn => Refer directly to ISO 4074:2002]
bursting volume and pressure
11.200 Identical adoption of ISO 4074-6 : 1996
SS 00243-07 1999   SS 243 : Part 7 : 1999 [withdrawn => Refer directly to ISO 4074:2002]
Rubber condoms - Oven conditioning
11.200 Identical adoption of ISO 4074-7 : 1996
SS 00244 1980   SS 244 : 1980 Toothpaste
Amendment No. 1, August 1994
71.100.70  
SS 00245 1995   SS 245 : 1995 Glass reinforced polyester sectional water tanks 23.020.10  
SS 00246 1996   SS 246 : 1996 [withdrawn]
Fused and unfused adaptors
Amendment No. 1, April 1999
Amendment No. 2, February 2002
29.120  
SS 00246 2004   SS 246 : 2004 Fused and unfused adaptors 29.120.30  
SS 00247 1981   SS 247 : 1981 Thermal detectors for electrical fire alarm systems 13.220.20  
SS 00248 1981   SS 248 : 1981 Terrazzo tiles
Amendment No. 1, November 1996
91.100.15  
SS 00249 1981   SS 249 : 1981 Steel surface cable trunking and accessories
Amendment No. 1, October 1997
29.100.10  
SS 00250 1996   SS 250 : 1996 [withdrawn]
Fittings for small steel hatch covers for ships
47.020.99  
SS 00251 1996   SS 251 : 1996 Fluid power systems and components - Graphic symbols and circuit diagram - Graphic symbols
Amendment No. 1 November 1996
01.080.30;
23.100
Identical adoption of ISO 1219-1 : 1991
SS 00252 1995   SS 252 : 1995 Palm kernel oil 67.200.10  
SS 00253 1981   SS 253 : 1981 White pan bread 67.060  
SS 00254-00 2001   SS 254 : Part 0 : 2001 Electrical apparatus for explosive gas atmospheres - General requirements 29.260.20 Identical adoption of IEC 60079-0 : 2000
SS 00254-01 2001   SS 254 : Part 1 : 2001 Electrical apparatus for explosive gas atmospheres - Flameproof enclosures 29.260.20 Identical adoption of IEC 60079-1 : 2001 and IEC 60079-1A : 1975
SS 00254-02 2002   SS 254 : Part 2 : 2002 Electrical apparatus for explosive gas atmospheres - Pressurized enclosures 29.260.20 Identical adoption of IEC 60079-2 : 2001-02
SS 00254-03 1997   SS 254 : Part 3 : 1997 [withdrawn]
Electrical apparatus for explosive gas atmospheres - Spark-test apparatus for intrinsically-safe circuits
29.260.20 Identical adoption of IEC 60079-3 : 1990
SS 00254-04 1997   SS 254 : Part 4 : 1997 [withdrawn => Refer directly to IEC 60079-6:1995]
Electrical apparatus for explosive gas atmospheres - Oil-immersion “o”
29.260.20 Identical adoption of IEC 60079-6 : 1995
SS 00254-05 1982   SS 254 : Part 5 : 1982 [withdrawn => Refer directly to IEC 60079-5:1997]
Electrical apparatus for explosive gas atmospheres - Sand-filled apparatus
29.260.20  
SS 00254-06 2003   SS 254 : Part 6 : 2003 Electrical apparatus for explosive gas atmospheres - Increased safety “e” 29.260.20 Identical adoption of IEC 60079-7 : 2001-11
SS 00254-07 1982   SS 254 : Part 7 : 1982 Electrical apparatus for explosive gas atmospheres - Method of test for ignition temperature
Amendment No. 1, October 1997
29.260.20  
SS 00254-08 1982   SS 254 : Part 8 : 1982 [withdrawn]
Electrical apparatus for explosive gas atmospheres - Classification of maximum surface temperature
   
SS 00254-09 1982   SS 254 : Part 9 : 1982 [withdrawn]
Electrical apparatus for explosive gas atmospheres - Marking
   
SS 00254-10 2003   SS 254 : Part 10 : 2003 Electrical apparatus for explosive gas atmospheres - Classification of hazardous areas 29.260.20 Identical adoption of IEC 60079-10 : 2002-06
SS 00254-11 2003   SS 254 : Part 11 : 2003 Electrical apparatus for explosive gas atmospheres - Intrinsic safety “i” 29.260.20 Identical adoption of IEC 60079-11 : 1999-02
SS 00254-14 2005 SS 254 : Part 14 : 2005 Electrical apparatus for explosive gas atmospheres - Electrical installations in hazardous areas (other than mines)   Identical adoption of the IEC 60079-14 : 2002-10
SS 00255 1981   SS 255 : 1981 Outlet units for master and community television antenna systems
Amendment No.1. November 1990
33.160  
SS 00256 1996   SS 256 : 1996 [withdrawn]
Diaphragm type float operated valves (plastics bodied) for cold water services only (excluding floats)
23.06  
SS 00257-01 1984   SS 257 : Part 1 : 1984 [Not Available => SS ISO 1101:1983]
Technical drawings -
   
SS 00257-02 2000   SS 257 : Part 2 : 2000 Technical drawings - Geometrical tolerancing – Maximum material principle 01.100.20 Identical adoption of ISO 2692 : 1988
SS 00257-03 1996   SS 257 : Part 3 : 1996 Technical drawings - Dimensioning and tolerancing of profiles 01.100.20 Identical adoption of ISO 1660 : 1987
SS 00258 1982   SS 258 : 1982 [withdrawn => SS ISO 3040:1990]
Technical drawings - Dimensioning and tolerancing cones
  ISO 3040 : 1974
SS 00259 1982   SS 259 : 1982 Electric navigation lights 47.020.60  
SS 00260 1982   SS 260 : 1982 Skimmed and whole milk powder
Amendment No. 1, December 1986
67.100.10  
SS 00261 1997   SS 261 : 1997 Industrial safety gloves and mittens 13.340.10  
SS 00262-01 1982   SS 262 : Part 1 : 1982 [withdrawn]
Garment sizing - Definitions and body measurement procedure
   
SS 00262-02 1982   SS 262 : Part 2 : 1982 [withdrawn]
Garment sizing - Men's and boys' outerwear garments
   
SS 00262-03 1982   SS 262 : Part 3 : 1982 [withdrawn]
Garment sizing - Women's and girls' outerwear garments
   
SS 00262-04 1982   SS 262 : Part 4 : 1982 [withdrawn]
Garment sizing - Infants' garment
   
SS 00262-05 1982   SS 262 : Part 5 : 1982 [withdrawn]
Garment sizing - Men's and boys' underwear, nightwear and shirts
   
SS 00262-06 1982   SS 262 : Part 6 : 1982 [Not Available => SS ISO 4416:1981]
Size designation of clothes - Women's and girls' underwear, nightwear, foundation garment and shirts
   
SS 00263-01 2000   SS 263 : Part 1 : 2000 [withdrawn]
Luminaires - General requirements and tests
29.140.40 Identical adoption of IEC 60598-1 : 1999
SS 00263-01 2005 SS 263 : Part 1 : 2005 Luminaires - General requirements and tests 29.140.40 Identical adoption of IEC 60598-1 : 2003
SS 00263-02 1998   SS 263 : Part 2 : 1998 Luminaires - Particular requirements for luminaires for emergency lighting
Amendment No. 1, January 2003
29.140.40 Identical adoption of IEC 60598-2-22 : 1997
SS 00263-03 1989   SS 263 : Part 3 : 1989 [Not Available]
Luminaires - Particular requirements for fixed general purpose luminaires
Amendment No. 1, March 1989
Amendment No. 2, November 1996
29.140.40 Identical adoption of IEC 60598-2-1 : 1979
SS 00263-04 2000   SS 263 : Part 4 : 2000 Luminaires - Particular requirements for recessed luminaires 29.140.40 Identical adoption of IEC 60598-2-2 : 1997
SS 00263-05 2000   SS 263 : Part 5 : 2000 Luminaires - Particular requirements for road and street lighting
Amendment No. 1, July 2001
29.140.40;
93.080.30
Identical adoption of IEC 60598-2-3 : 1997
SS 00263-06 1998   SS 263 : Part 6 : 1998 Luminaires - Particular requirements for portable general purpose luminaires 29.140.40 Identical adoption of IEC 60598-2-4 : 1997
SS 00263-07 1996   SS 263 : Part 7 : 1996 [Not Available]
Luminaires - Particular requirements for luminaires with built-in transformers for filament lamps
Amendment No. 1, July 1998
29.140.40 Identical adoption of IEC 60598-2-6 : 1994
SS 00263-08 1998   SS 263 : Part 8 : 1998 Luminaires - Particular requirements for floodlights 29.140.40 Identical adoption of IEC 60598-2-5 : 1998
SS 00263-09 1990   SS 263 : Part 9 : 1990 Luminaires - Particular requirements for portable luminaires for garden use
Amendment No. 1, March 1990
Amendment No. 2, November 1996
29.140.40 Identical adoption of IEC 60598-2-7 : 1982
SS 00263-10 2000   SS 263 : Part 10 : 2000 Luminaires - Particular requirements for lighting chains 29.140.40 Identical adoption of IEC 60598-2-20 : 1998
SS 00263-11 1997   SS 263 : Part 11 : 1997 [Not Available]
Luminaires - Particular requirements for luminaires for swimming pools and similar applications
29.140.40 Identical adoption of IEC 60598-2-18 : 1993
SS 00263-12 1997   SS 263 : Part 12 : 1997 [Not Available]
Luminaires - Particular requirements for air-handling luminaires
29.140.40 Identical adoption of IEC 60598-2-19 : 1981
SS 00263-13 1997   SS 263 : Part 13 : 1997 [Not Available]
Luminaires - Particular requirements for handlamps
29.140.40 Identical adoption of IEC 60598-2-8 : 1996
SS 00264 1982   SS 264 : 1982 Pewter 77.120.60  
SS 00265 1982   SS 265 : 1982 [withdrawn]
BIack tea
  ISO 3720 : 1981
SS 00266-01 1982   SS 266 : Part 1 : 1982 [withdrawn]
Methods of analysis for tea - Preparation of ground sample of known dry matter content
  ISO 1572 : 1980
SS 00266-02 1982   SS 266 : Part 2 : 1982 [withdrawn]
Methods of analysis for tea - Determination of loss in mass at 103°C
  ISO 1573 : 1980
SS 00266-03 1982   SS 266 : Part 3 : 1982 [withdrawn]
Methods of analysis for tea - Determination of water extract
  ISO 1574 : 1980
SS 00266-04 1982   SS 266 : Part 4 : 1982 [withdrawn]
Methods of analysis for tea - Determination of total ash
  ISO 1575 : 1980
SS 00266-05 1982   SS 266 : Part 5 : 1982 [withdrawn]
Methods of analysis for tea - Determination of water-soluble ash and water-insoluble ash
  ISO 1576 : 1975
SS 00266-06 1982   SS 266 : Part 6 : 1982 [withdrawn]
Methods of analysis for tea - Determination of acid-insoluble ash
  ISO 1577 : 1980
SS 00266-07 1982   SS 266 : Part 7 : 1982 [withdrawn]
Methods of analysis for tea - Determination of alkalinity of water-soluble ash
  ISO 1578 : 1975
SS 00267 1982   SS 267 : 1982 [withdrawn]
Tea sampling
  ISO 1839 : 1980
SS 00268 1983   SS 268 : 1983 Aluminium framed sliding glass doors
Erratum No. 1, June 1986.
81.040.20;
91.060.50
 
SS 00269 1995   SS 269 : 1995 [Not Available]
Paint colours for building purposes
87.040.10 BS 4800 : 1989
SS 00270 1996   SS 270 : 1996 Elastomeric seals for joints in pipework and pipelines 83.140;
23.040.80
 
SS 00271 1983   SS 271 : 1983 Concrete masonry units (for non-loadbearing applications) 91.100.30  
SS 00272 1983   SS 272 : 1983 Unplasticized PVC pipes below ground for drainlines and sewers
Erratum No. 1, January 1985
Amendment No. 1, February 1996
23.040.20;
23.040.45;
91.140.80
 
SS 00273 1983   SS 273 : 1983 Ball pen
Amendment No. 1, December 1984
Amendment No. 2, November 1985
97.180  
SS 00274 1983   SS 274 : 1983 [Not Available => SS ISO 6411:1982]
Technical drawings - Simplified representation of centre holes
   
SS 00275 1999   SS 275 : 1999 Cable trunking made of insulating material
Erratum No. 1, May 2000;
Amendment 1, February 2001
29.060.01  
SS 00276 1984   SS 276 : 1984 [withdrawn]
Capacity measurement and energy consumption test methods for household refrigerators and combination refrigerator-freezers
   
SS 00277 1984   SS 277 : 1984 [withdrawn]
Low-voltage controlgear: contactors
  IEC 60158-1 : 1970 with Supplements 158-1 A, 158-1 B and 158-1 C and Amendment No. 1
SS 00278-01 1984   SS 278 : Part 1 : 1984 [withdrawn]
Primary batteries - General
  IEC 60086-1 : 1982
SS 00278-02 1984   SS 278 : Part 2 : 1984 [withdrawn]
Primary batteries – Specification sheets
  IEC 60086-2 : 1982
SS 00279 1984   SS 279 : 1984 Degrees of protection of enclosures for switchgear and controlgear for voltages up to 1000 V a.c. and 1500 V d.c.    
SS 00280 1984   SS 280 : 1984 Frame scaffoldings
Amendment No. 1, April 1988
Amendment No. 2, November 1994
91.2  
SS 00281 1984   SS 281 : 1984 Pressure regulators for liquefied petroleum gases
Amendment No. 1, November 1989
Amendment No. 2, January 2004
75.160.30;
23.060.40;
75.200
 
SS 00282 1984   SS 282 : 1984 [withdrawn]
Metal cutting bandsaw blades
  BS 3877 : 1979
SS 00283 1984   SS 283 : 1984 [withdrawn => SS ISO 3166:1981]
Codes for the representation of names of countries
   
SS 00284 1984   SS 284 : 1984 [Not Available => SS ISO 4217:1981]
Codes for the representation of currencies and funds
   
SS 00285 1984   SS 285 : 1984 Liquid detergent for hand dishwashing
Amendment No. 1, August 1994
71.100.40  
SS 00286-01 1984   SS 286 : Part 1 : 1984 Caution labelling for hazardous substances - Classification and class labels for hazardous substances
Erratum No. 1, April 1985
13.300  
SS 00286-02 1984   SS 286 : Part 2 : 1984 Caution labelling for hazardous substances - United Nations substance identification numbers 13.300  
SS 00286-03 1984   SS 286 : Part 3 : 1984 Caution labelling for hazardous substances - HAZCHEM emergency action code 13.300  
SS 00286-04 1984   SS 286 : Part 4 : 1984 Caution labelling for hazardous substances - Marking of packages, containers and vehicles 13.300  
SS 00286-05 1984   SS 286 : Part 5 : 1984 Caution labelling for hazardous substances - NFPA hazard identification system 13.300  
SS 00287 1984   SS 287 : 1984 Cream crackers 67.060  
SS 00288 1998   SS 288 : 1998 Soy sauce 67.220.10  
SS 00289-01 2000   SS 289 : Part 1 : 2000 Concrete - Guide to specifying concrete 91.100.30  
SS 00289-02 2000   SS 289 : Part 2 : 2000 Concrete - Methods for specifying concrete mixes 91.100.30  
SS 00289-03 2000   SS 289 : Part 3 : 2000 Concrete - Specification for the procedures to be used in producing and transporting concrete 91.100.30  
SS 00289-04 2000   SS 289 : Part 4 : 2000 Concrete - Specification for the procedures to be used in sampling, testing and assessing compliance of concrete 91.100.30  
SS 00290 1984   SS 290 : 1984 Rubber gloves for electrical purposes 83.140;
13.260;
13.340.10
 
SS 00291 1996   SS 291 : 1996 Conductors in insulated cables and cords 29.060.20 IEC 60228:1978 (NEQ)
SS 00292 1984   SS 292 : 1984 Safety nets for construction sites
Amendment No. 1, November 1994
13.100  
SS 00293-01 1997   SS 293 : Part 1 : 1997 [withdrawn => SS 482 part 1:2000]
Low-voltage switchgear and controlgear assemblies - Type-tested and partially type-tested assemblies
29.120.60 Identical adoption of IEC 60439-1 : 1992
SS 00293-02 1987   SS 293 : Part 2 : 1987 [withdrawn]
Particular requirements for fuseboards
   
SS 00293-03 1997   SS 293 : Part 3 : 1997 [withdrawn => Refer directly to IEC 60439-3:2001]
Particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access for their use - Distribution boards
29.120.60 Identical adoption of IEC 60439-3 : 1990
SS 00294 1998   SS 294 : 1998 Valves for use with domestic and industrial liquefied petroleum gas (LPG) cylinders 23.020.30;
23.060.40
 
SS 00295 1984   SS 295 : 1984 [withdrawn]
Hard boiled sweets
   
SS 00296 1984   SS 296 : 1984 [withdrawn]
Transistorised ballasts for tubular fluorescent lamps
   
SS 00297 1996   SS 297 : 1996 Steel wire ropes for hoisting 77.140.65  
SS 00298 1985   SS 298 : 1985 Rubber mats for electrical purposes 29.080.10;
83.140
 
SS 00299-01 1998   SS 299 : Part 1 : 1998 Fire resistant cables - Performance requirements for cables required to maintain circuit integrity under fire conditions 29.060.20;
13.220.40
 
Sort Mk 規格番号 Top規格名称(英語) 国際規格分類
( ICSコードの説明 )
国際整合
( IDT,MOD,NEQ等の説明 )
SS 00300-01 1985   SS 300 : Part 1 : 1985 [withdrawn]
Methods of test for gases evolved during combustion of electric cables - Method of determination of amount of halogen acid gas evolved during combustion of polymeric materials taken from cables
   
SS 00301 1985   SS 301 : 1985 [withdrawn => SS 483:2000]
Ceramic floor and wall tiles
   
SS 00302 1985   SS 302 : 1985 Soya bean milk and soya bean drink 67.160.20  
SS 00303 1985   SS 303 : 1985 [withdrawn]
Scaffold boards and metal deckings
77.140.20;
79.060;
91.220;
 
SS 00304 1985   SS 304 : 1985 Industrial overall
Amendment No. 1, November 1996
13.340.10  
SS 00305 1985   SS 305 : 1985 [withdrawn]
School exercise books and papers
   
SS 00306-01 1985   SS 306 : Part 1 : 1985 [withdrawn => Refer directly to IEC 60745]
Safety of hand-held motor-operated electric tools - General requirements
13.110;
25.140.20
 
SS 00306-02-01 1985   SS 306 : Part 2 : 1 : 1985 [withdrawn => Refer directly to IEC 60745]
Safety of hand-held motor-operated electric tools - Particular requirements - Screwdrivers and impact wrenches
13.110;
25.140.20
 
SS 00306-02-02 1985   SS 306 : Part 2 : 2 : 1985 [withdrawn => Refer directly to IEC 60745]
Safety of hand-held motor-operated electric tools - Particular requirements - Sheet metal shears
13.110;
25.140.20
 
SS 00306-02-03 1985   SS 306 : Part 2 : 3 : 1985 [withdrawn => Refer directly to IEC 60745]
Safety of hand-held motor-operated electric tools - Particular requirements - Concrete vibrators (internal vibrators)
13.110;
25.140.20
 
SS 00306-02-04 1985   SS 306 : Part 2 : 4 : 1985 [withdrawn => Refer directly to IEC 60745]
Safety of hand-held motor-operated electric tools - Particular requirements - Sanders
13.110;
25.140.20
 
SS 00306-02-05 1985   SS 306 : Part 2 : 5 : 1985 [withdrawn => Refer directly to IEC 60745]
Safety of hand-held motor-operated electric tools - Particular requirements - Circulars saws and circular knives
13.110;
25.140.20
 
SS 0030602-06 1985   SS 306 : Part 2 : 6 : 1985 [withdrawn => Refer directly to IEC 60745]
Safety of hand-held motor-operated electric tools - Particular requirements - Grinders, polishers and disk-type sanders
13.110;
25.140.20
 
SS 00306-02-07 1985   SS 306 : Part 2 : 7 : 1985 [withdrawn => Refer directly to IEC 60745]
Safety of hand-held motor-operated electric tools - Particular requirements - Tappers
13.110;
25.140.20
 
SS 00306-02-08 1985   SS 306 : Part 2 : 8 : 1985 [withdrawn => Refer directly to IEC 60745]
Safety of hand-held motor-operated electric tools - Particular requirements - Reciprocating saws (jig and sabre saws)
13.110;
25.140.20
 
SS 00306-02-09 1985   SS 306 : Part 2 : 9 : 1985 [withdrawn => Refer directly to IEC 60745]
Safety of hand-held motor-operated electric tools - Particular requirements - Planers
13.110;
25.140.20
 
SS 00306-02-10 1985   SS 306 : Part 2 : 10 : 1985 [withdrawn => Refer directly to IEC 60745]
Safety of hand-held motor-operated electric tools - Particular requirements - Hedge trimmers and grass shears
13.110;
25.140.20;
65.060.40
 
SS 00307 1996   SS 307 : 1996 Portable cable reels for domestic and similar purposes 29.060.20  
SS 00308-00 1988   SS 308 : Part 0 : 1988 [withdrawn => SS ISO 9000-1:1994]
Quality management and quality assurance standards - Guidelines for selection and use
   
SS 00308-01 1988   SS 308 : Part 1 : 1988 [withdrawn => SS ISO 9001:1994]
Quality systems - Specification for quality assurance in design, development, production, installation and servicing
   
SS 00308-02 1988   SS 308 : Part 2 : 1988 [withdrawn => SS ISO 9002:1994]
Quality systems - Specification for quality assurance in production, installation and servicing
   
SS 00308-03 1988   SS 308 : Part 3 : 1988 [withdrawn => SS ISO 9003:1994]
Quality systems - Specification for quality assurance in final inspection and test
   
SS 00308-04 1988   SS 308 : Part 4 : 1988 [withdrawn => SS ISO 9004-1:1994]
Quality management and quality system elements - Guidelines
   
SS 00309 1985   SS 309 : 1985 Method for the determination of shading coefficients of glazing materials 81.040.01  
SS 00310 1986   SS 310 : 1986 Concrete interlocking roofing tiles
Amendment No. 1, February 1996
91.100.30  
SS 00311 1994   SS 311 : 1994 [withdrawn]
Steel tubes and fittings used in tubular scaffolding
23.040.10  
SS 00311 2005 SS 311 : 2005 Steel tubes and fittings used in tubular scaffolding 23.040.10  
SS 00312 1986   SS 312 : 1986 Toilet bowl cleaning compound 71.100.40  
SS 00313 1998   SS 313 : 1998 [Not Available]
Lighter
97.180 Identical adoption of ISO 9994 : 1995
SS 00314 1986   SS 314 : 1986 [withdrawn => SS 473]
Industrial eye-protectors
   
SS 00315 1997   SS 315 : 1997 Black pepper and white pepper (whole and ground)
Erratum No. 1, December 1998
67.220.10  
SS 00316 1986   SS 316 : 1986 [withdrawn]
Testing and rating room air conditioners
   
SS 00317 1986   SS 317 : 1986 [withdrawn => SS 402 Part 2]
Permanent anchors for industrial safety belts and harnesses
   
SS 00318 1987   SS 318 : 1987 [withdrawn => Refer directly to IEC 60044-1:2003]
Current transformers for measurement and protection
17.220.20  
SS 00319 1997   SS 319 : 1997 Cocoa butter 67.140.30  
SS 00320 1987   SS 320 : 1987 Concrete admixtures 91.100.30  
SS 00321 1987   SS 321 : 1987 Corrugated fibreboard containers for general purposes
Erratum No. 1, November 1987
Amendment No. 1, September 1997
55.040;
85.060
 
SS 00322 1987   SS 322 : 1987 Earthing and bonding clamps
Amendment No. 1, June 1999
21.060.70;
29.120.20
 
SS 00323-00 1987   SS 323 : Part 0 : 1987 Methods of test for flexible plastic packaging materials - General introduction
Amendment No. 1, November 1996
55.040  
SS 00323-A01 1987   SS 323 : Part A1 : 1987 Methods of test for flexible plastic packaging materials - Determination of thickness 55.040  
SS 00323-A02 1987   SS 323 : Part A2 : 1987 Methods of test for flexible plastic packaging materials - Determination of density by the density- gradient technique 55.040  
SS 00323-B01 1987   SS 323 : Part B1 : 1987 Methods of test for flexible plastic packaging materials - Determination of haze and luminous transmittance of transparent plastics 55.040  
SS 00323-B02 1987   SS 323 : Part B2 : 1987 Methods of test for flexible plastic packaging materials - Determination of specular gloss 55.040  
SS 00323-B03 1987   SS 323 : Part B3 : 1987 Methods of test for flexible plastic packaging materials - Determination of transparency 55.040  
SS 00323-C01 1987   SS 323 : Part C1 : 1987 Methods of test for flexible plastic packaging materials - Determination of tensile strength 55.040  
SS 00323-C02 1987   SS 323 : Part C2 : 1987 Methods of test for flexible plastic packaging materials - Determination of impact resistance (by falling weight method) 55.040  
SS 00323-C03 1996   SS 323 : Part C3 : 1996 [Not Available]
Methods of test for flexible plastic packaging materials - Determination of initial tear resistance
55.040 Identical adoption of ISO 6383-2 : 1983
SS 00323-C04 1987   SS 323 : Part C4 : 1987 Methods of test for flexible plastic packaging materials - Determination of openability 55.040  
SS 00323-C05 1987   SS 323 : Part C5 : 1987 Methods of test for flexible plastic packaging materials - Determination of static and kinetic coefficients of friction 55.040  
SS 00323-D01 1987   SS 323 : Part D1 : 1987 Methods of test for flexible plastic packaging materials - Assessment of odour from packaging materials used for foodstuff 55.040  
SS 00323-D02 1987   SS 323 : Part D2 : 1987 Methods of test for flexible plastic packaging materials - Determination of odour resistance/taint from environment 55.040  
SS 00323-D03 1987   SS 323 : Part D3 : 1987 Methods of test for flexible plastic packaging materials - Determination of residual solvent 55.040  
SS 00323-D04 1987   SS 323 : Part D4 : 1987 Methods of test for flexible plastic packaging materials - Determination of resistance to grease and oil 55.040  
SS 00323-D05 1987   SS 323 : Part D5 : 1987 Methods of test for flexible plastic packaging materials - Determination of residual vinyl chloride monomer content in PPB range in vinyl chloride homo- and co-polymers by head-space gas chromatography 55.040  
SS 00323-D06 1987   SS 323 : Part D6 : 1987 Methods of test for flexible plastic packaging materials - Determination of residual styrene monomer in polystyrene by gas chromatography 55.040  
SS 00323-E01 1987   SS 323 : Part E1 : 1987 Methods of test for flexible plastic packaging materials - Determination of water vapour transmission 55.040  
SS 00323-E02 1987   SS 323 : Part E2 : 1987 Methods of test for flexible plastic packaging materials - Determination of gas permeability characteristics 55.040  
SS 00323-F01 1987   SS 323 : Part F1 : 1987 Methods of test for flexible plastic packaging materials - Determination of heat seal strength 55.040  
SS 00323-F02 1987   SS 323 : Part F2 : 1987 Methods of test for flexible plastic packaging materials - Determination of unrestrained linear thermal shrinkage 55.040  
SS 00323-G01 1987   SS 323 : Part G1 : 1987 Methods of test for flexible plastic packaging materials - Determination of printability 55.040  
SS 00324 1988   SS 324 : 1988 [withdrawn => SS 443]
XLPE insulated power cables for rated voltages of up to 600/1000 V
   
SS 00325 1988   SS 325 : 1988 Electrical safety requirements for room aerials 13.260;
33.120.40
 
SS 00326 1988   SS 326 : 1988 Break mandrel blind rivets 21.060.40  
SS 00327 1988   SS 327 : 1988 Waterless hand cleaner 71.100.40  
SS 00328-00 1989   SS 328 : Part 0 : 1989 Methods of test for the evaluation of electroplated finishes - Introduction 25.22  
SS 00328-A01 1988   SS 328 : Part A1 : 1988 [Not Available => SS ISO 2080:1981]
Electroplating and related processes - Vocabulary
   
SS 00328-B01 1988   SS 328 : Part B1 : 1988 [Not Available => SS ISO 2064:1980]
Metallic and other non-organic coatings - Definitions and conventions concerning the measurement of thickness
   
SS 00328-B02 1988   SS 328 : Part B2 : 1988 [Not Available => SS ISO 3882:1986]
Metallic and non-organic coatings - Review of methods of measurement of thickness
   
SS 00328-B03 1988   SS 328 : Part B3 : 1988 [Not Available => SS ISO 1463:1982]
Metallic and oxide coatings - Measurement of coating thickness- Microscopical method
   
SS 00328-B04 1988   SS 328 : Part B4 : 1988 [Not Available => SS ISO 2177:1985]
Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution
   
SS 00328-B05 1988   SS 328 : Part B5 : 1988 [Not Available => SS ISO 2178:1982]
Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method
   
SS 00328-B06 1988   SS 328 : Part B6 : 1988 [Not Available => SS ISO 2361:1982]
Electrodeposited nickel coatings on magnetic and non-magnetic substrates- Measurement of coating thickness- Magnetic method
   
SS 00328-B07 1988   SS 328 : Part B7 : 1988 [Not Available => SS ISO 2360:1982]
Eddy current method for non-conductive coatings on non-magnetic basis metals
   
SS 00328-B08 1988   SS 328 : Part B8 : 1988 [withdrawn => SS ISO 3543:1981]
Metallic and non-metallic coatings- Measurement of thickness - Beta backscatter method
   
SS 00328-B09 1988   SS 328 : Part B9 : 1988 [Not Available => SS ISO 3497:1976]
Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods
   
SS 00328-C01 1988   SS 328 : Part C1 : 1988 [Not Available => SS ISO 3768:1976]
Metallic coatings - Neutral salt spray test (NSS test)
   
SS 00328-C02 1988   SS 328 : Part C2 : 1988 [Not Available => SS ISO 3769:1976]
Metallic coatings - Acetic acid salt spray test (ASS test)
   
SS 00328-C03 1988   SS 328 : Part C3 : 1988 [Not Available => SS ISO 3770:1976]
Metallic coatings - Copper-accelerated acetic acid salt spray test (CASS test)
   
SS 00328-C04 1988   SS 328 : Part C4 : 1988 [withdrawn => SS ISO 4541:1978]
Metallic and other non-organic coatings - Corrodkote corrosion test (CORR test)
   
SS 00328-C05 1988   SS 328 : Part C5 : 1988 [Not Available => SS ISO 4540:1980]
Metallic coatings - Coatings cathodic to the substrate - Rating of electroplated test specimens subjected to corrosion tests
   
SS 00328-C06 1988   SS 328 : Part C6 : 1988 [Not Available => SS ISO 1462:1973]
Metallic coatings - Coatings other than those anodic to the basis metal - Accelerated corrosion tests - Method for the evaluation of the results
   
SS 00328-C07 1989   SS 328 : Part C7 : 1989 [Not Available => SS ISO 4536:1985, SS ISO 483:1988]
Metallic and non-organic coatings on metallic substrates - Saline droplets corrosion test (SD test)
Plastics - Small enclosures for conditioning and testing using aqueous solutions to maintain relative humidity at constant,value
   
SS 00328-C08 1988   SS 328 : Part C8 : 1988 [Withdrawn => SS ISO 4539:1980]
Electrodeposited chromium coatings - Electrolytic corrosion test (EC test)
   
SS 00328-C09 1988   SS 328 : Part C9 : 1988 [withdrawn => SS ISO 4538:1978]
Metallic coatings - Thioacetamide corrosion test (TAA test)
   
SS 00328-C10 1988   SS 328 : Part C10 : 1988 [withdrawn => SS ISO 6988:1985]
Metallic and other non-organic coatings - Sulphur dioxide test with general condensation of moisture
   
SS 00328-C11 1988   SS 328 : Part C11 : 1988 [Not Available => SS ISO 4542:1981]
Metallic and other non-organic coatings - General rules for stationary outdoor exposure corrosion tests
   
SS 00328-C12 1988   SS 328 : Part C12 : 1988 [Not Available => SS ISO 4543:1981]
Metallic and other non-organic coatings - General rules for corrosion tests applicable for storage conditions
   
SS 00328-D01 1988]   SS 328 : Part D1 : 1988 [Not Availabe => SS ISO 2819:1980]
Metallic coatings on metallic substrates - Electrodeposited and chemically deposited coatings -Review of methods available for testing adhesion
   
SS 00328-E01 1988   SS 328 : Part E1 : 1988 [Not Available => SS ISO 4516:1980]
Metallic and related coatings - Vickers and Knoop microhardness tests
   
SS 00328-F01 1988   SS 328 : Part F1 : 1988 [withdrawn => SS ISO 8401:1986]
Metallic coatings - Review of methods of measurement of ductility
   
SS 00329 1988   SS 329 : 1988 Plain semi-sweet biscuits (non-creamed) 67.060  
SS 00330 1988   SS 330 : 1988 Filled milk sweetener
Amendment No. 1, March 1990
67.100.10  
SS 00331 1997   SS 331 : 1997 Plastic refuse sacks 55.08  
SS 00332 2000   SS 332 : 2000 Fire doors 13.220.50;
91.060.50
 
SS 00333 1996   SS 333 : 1996 Fire dampers 13.22  
SS 00334 1998   SS 334 : 1998 Timber pallets
Amendment No. 1, December 1999
55.180.20  
SS 00335 1988   SS 335 : 1988 [withdrawn]
Guide to the preparation of laboratory quality manual
03.120.10  
SS 00336-01 1989   SS 336 : Part 1 : 1989 Hermetically sealed metal cans for food and drinks - Definitions and determination methods for capacities and dimensions
Amendment No. 1, September 1997
55.120  
SS 00336-02 1990   SS 336 : Part 2 : 1990 Hermetically sealed metal cans for food and drinks - Carbonated and non-carbonated drinks
Amendment No. 1, November 1998
55.120;
67.160.20
 
SS 00336-03 1991   SS 336 : Part 3 : 1991 Hermetically sealed metal cans for food and drinks - Food 55.120  
SS 00337 2001   SS 337 : 2001 Safety of information technology equipment 35.020;
35.260
Modified adoption of IEC 60950 : 1999-04
SS 00338 1989   SS 338 : 1989 [withdrawn => IEC CISPR 22:1993]
Limits and methods of measurement of electromagnetic compatibility characteristics of information technology equipment
  IEC CISPR 22 : 1985
SS 00339 1989   SS 339 : 1989 [Not Available => IEC 60096-1:1986]
Radio-frequency cables: General requirements and measuring methods
Amendment No. 1, March 1989
33.120.10 IEC 60096-1 : 1986 (NEQ)
SS 00340 1999   SS 340 : 1999 Chilli sauce 67.080.20  
SS 00341 2001   SS 341 : 2001 Safety glazing materials for use in buildings (human impact considerations) 91.100  
SS 00342 1989   SS 342 : 1989 Electroplated coatings of nickel plus chromium on plastic parts for decorative purposes 25.220.40 Modified adoption of ISO 4525 : 1985
SS 00343-01 2001   SS 343 : Part 1 : 2001 Lifting gear - Wire rope slings 13.110  
SS 00343-02 1989   SS 343 : Part 2 : 1989 Lifting gear - Hooks 53.020.30  
SS 00343-03 1990   SS 343 : Part 3 : 1990 Lifting gear - Shackles 53.020.30  
SS 00344 1989   SS 344 : 1989 Guide to the selection and application of intruder alarm systems 13.31  
SS 00345 1990   SS 345 : 1990 Algae resistant emulsion paint for decorative purposes 87.040.10  
SS 00346 1990   SS 346 : 1990 [withdrawn => Refer directly to BS 5544:1978]
Anti-bandit glazing
81.040.20;
13.310
 
SS 00347 1990   SS 347 : 1990 Timber doors 91.060.50;
91.080.20
 
SS 00348 1990   SS 348 : 1990 Anti-reflection coating on ophthalmic lenses of glass material 11.040.70  
SS 00349 1997   SS 349 : 1997 Refined, deodorized and winterized sunflower seed oil 67.200.20  
SS 00350 1990   SS 350 : 1990 Semolina 67.060  
SS 00351 1990   SS 351 : 1990 Self-raising flour 67.060  
SS 00352 1990   SS 352 : 1990 Wholemeal flour 67.060  
SS 00353 1991   SS 353 : 1991 [withdrawn => Refer directly to IEC 60774]
Helical-scan video tape cassette system using 12.65 mm (0.5 in) magnetic tape on type VHS
33.160.40  
SS 00354-01 1991   SS 354 : Part 1 : 1991 [withdrawn => SS IEC 60326-1:1984]
Printed boards - General information for the specification writer
   
SS 00354-02 1991   SS 354 : Part 2 : 1991 [withdrawn => Refer directly to IEC 60326]
Printed boards - Test methods
Amendment No. 1, March 1991
31.180 Modified adoption of IEC 60326-2 : 1990
SS 00354-03 1994   SS 354 : Part 3 : 1994 [withdrawn => Refer directly to IEC 60326]
Printed boards - Design and use of printed boards
Amendment No. 1, May 1994
31.180 Modified adoption of IEC 60326-3 : 1991
SS 00354-04 1993   SS 354 : Part 4 : 1993 [Not Available => SS IEC 60326-4:1980]
Printed boards - Single and double sided printed boards with plain holes
   
SS 00354-05 1993   SS 354 : Part 5 : 1993 [Not Available => SS IEC 60326-5:1980]
Printed boards - Single and double sided printed boards with plated-through holes
   
SS 00354-06 1993   SS 354 : Part 6 : 1993 [withdrawn => SS IEC 60326-6:1980]
Printed boards - Multilayer printed boards
   
SS 00354-07 1993   SS 354 : Part 7 : 1993 [withdrawn => Refer directly to IEC 60326]
Printed boards - Single and double sided flexible printed boards without through connections
Amendment No. 1, November 1993
31.180 Modified adoption of IEC 60326-7 : 1981
SS 00354-08 1993   SS 354 : Part 8 : 1993 [withdrawn => Refer directly to IEC 60326]
Printed boards - Single and double sided flexible printed boards with through connections
Amendment No. 1, November 1993
31.180 Modified adoption of IEC 60326-8 : 1981
SS 00354-09 1995   SS 354 : Part 9 : 1995 [withdrawn => Refer directly to IEC 60326]
Printed boards - Flexible multilayer printed boards with through connections
Amendment No. 1, February 1995
31.180 Modified adoption of IEC 60326-9 : 1991
SS 00354-10 1995   SS 354 : Part 10 : 1995 [Not Available => SS IEC 60326-10:1991]
Printed boards - Flex-rigid double-sided printed boards with through connections
   
SS 00354-11 1996   SS 354 : Part 11 : 1996 [withdrawn => Refer directly to IEC 60326]
Printed boards - Flex-rigid multilayer printed boards with through connections
Amendment No. 1, February 1996
31.180 Modified adoption of IEC 60326-11 : 1991
SS 00355 1991   SS 355 : 1991 Disposable expanded polystyrene food containers 83.140;
55.020
 
SS 00356 1991   SS 356 : 1991 Disposable polystyrene cutlery 83.140;
97.040.60
 
SS 00357-01 1991   SS 357 : Part 1 : 1991 Cushioning foams - Polystyrene
Amendment No. 1, March 1999
55.040;
83.140
 
SS 00358-01 1996   SS 358 : Part 1 : 1996 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - General requirements
Amendment No. 1, July 1998
29.060.20 Identical adoption of IEC 60227-1 : 1993
SS 00358-02 1998   SS 358 : Part 2 : 1998 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Test methods 29.060.20 Identical adoption of IEC 60227-2 : 1997
SS 00358-03 1998   SS 358 : Part 3 : 1996 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Non-sheathed cables for fixed wiring
Amendment No. 1, July 1998
29.060.20 Modified adoption of IEC 60227-3 : 1993
SS 00358-04 1996   SS 358 : Part 4 : 1996 [withdrawn => Refer directly to IEC 60227-4 Ed.2.1:1997-12]
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Sheathed cables for fixed wiring
Amendment No. 1, July 1998
29.060.20 Identical adoption of IEC 60227-4 : 1992
SS 00358-05 1998   SS 358 : Part 5 : 1998 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Flexible cables (cords)
Amendment No. 1, February 2002
29.060.20 Modified adoption of IEC 60227-5 : 1997
SS 00358-06 1991   SS 358 : Part 6 : 1991 [withdrawn]
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Lift cables and cables for flexible connections
29.060.20;
91.140.90
 
SS 00358-07 1997   SS 358 : Part 7 : 1997 [withdrawn => Refer directly to IEC 60227-7 Ed. 1.1:2003-04]
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Flexible cable screened and unscreened with two or more conductors.
29.060.20 Identical adoption of IEC 60227-7 : 1995
SS 00359 1996   SS 359 : 1996 [withdrawn => Refer directly to IEC 60898]
Circuit breakers for overcurrent protection for household and similar installations
29.120.40 Identical adoption of IEC 60898 : 1995
SS 00360 1992   SS 360 : 1992 [Not Available]
Performance and construction of electric circulating fans and regulators
Amendment No. 1, February 1992
Amendment No. 2, February 1996
Amendment No. 3, November 1998
23.120 IEC 60879 : 1986 (NEQ)
SS 00361-01 1992   SS 361 : Part 1 : 1992 [withdrawn => Refer directly to BS EN 1063:2000]
Security glazing - Bullet-resistant glazing for interior use
13.310 BS 5051 : Part 1 : 1988
SS 00362-01 2004   SS 362 : Part 1 : 2004 Specification for EAN bar coding system - EAN - An unambiguous international product identification system 35.040  
SS 00362-02 2004   SS 362 : Part 2 : 2004 Specification for EAN bar coding system - EAN code 128 and application identifier standard 35.040  
SS 00363 1993   SS 363 : 1993 Steel gratings for roads and drainage 77.080.20;
93.080.30
 
SS 00364 1993   SS 364 : 1993 Fire safety signs
Amendment No. 1, June 1999
01.080.10;
13.220
 
SS 00365 1993   SS 365 : 1993 [withdrawn => SS 146 Part 2-18]
Safety requirements for electric fans and regulators for household and similar purposes
  IEC 60342-1 : 1981
SS 00366 1994   SS 366 : 1994 Digital representation for communication of product data : IGES application subsets for AEC industry 35.240.10  
SS 00367 1994   SS 367 : 1994 UPVC lined steel pipes for potable water services
Amendment No. 1, September 1997
23.040.01;
23.040.50
 
SS 00368 1994   SS 368 : 1994 Plastic coated malleable cast iron pipe fittings for potable water services 23.040.50  
SS 00369 1994   SS 369 : 1994 Moulded thermoplastic refuse bins for domestic and industrial use 83.140;
97.180
 
SS 00370 1994   SS 370 : 1994 Metal roofing 91.060.20;
77.140
 
SS 00371 1994   SS 371 : 1994 Uninterruptible power supplies
Amendment No. 1, May 1994
29.200 Identical adoption of IEC 60146-4 : 1986
SS 00372-01 2000   SS 372 : Part 1 : 2000 Identification cards - Integrated circuit(s) cards with contacts - Physical characteristics 35.240.15 Modified adoption of ISO/IEC 7816-1 : 1997
SS 00372-03 2000   SS 372 : Part 3 : 2000 Identification cards - Integrated circuit(s) cards with contacts - Electronic signals and transmission protocols 35.240.15 Identical adoption of ISO/IEC 7816-3 : 1997
SS 00372-04 1999   SS 372 : Part 4 : 1999 Identification cards - Integrated circuit(s) cards with contacts - Interindustry commands for interchange 35.240 Describes the ISO/IEC 7816 : Part 4 commands used within the Singapore context.
SS 00373-01 1994   SS 373 : Part 1 : 1994 Optics and optical instruments - Contact lenses - Hard corneal and scleral contact lenses 11.040.70  
SS 00373-02 1994   SS 373 : Part 2 : 1994 Optics and optical instruments - Contact lenses - Soft corneal and scleral contact lenses 11.040.70  
SS 00373-03 1994   SS 373 : Part 3 : 1994 Optics and optical instruments - Contact lenses - Determination of back vertex power of contact lenses 11.040.70  
SS 00373-04 1994   SS 373 : Part 4 : 1994 Optics and optical instruments - Contact lenses - Determination of diameter of contact lenses 11.040.70  
SS 00373-05 1994   SS 373 : Part 5 : 1994 Optics and optical instruments - Contact lenses - Determination of thickness of rigid contact lenses 11.040.70  
SS 00373-06 1994   SS 373 : Part 6 : 1994 Optics and optical instruments - Contact lenses - Determination of strain of contact lenses 11.040.70  
SS 00373-07 1994   SS 373 : Part 7 : 1994 Optics and optical instruments - Contact lenses - Determination of inclusions and surface imperfections of rigid contact lenses 11.040.70  
SS 00373-08 1994   SS 373 : Part 8 : 1994 Optics and optical instruments - Contact lenses - Determination of curvature 11.040.70  
SS 00374 1994   SS 374 : 1994 Preformed waterproofing membranes for concealed roof
Erratum No. 1, October 1995
91.120.30  
SS 00375-01 2001   SS 375 : Part 1 : 2001 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water - Specification 13.060.20  
SS 00375-02-01 2001   SS 375 : Part 2 : 1 : 2001 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water - Methods of test - Samples for testing 13.060.20  
SS 00375-02-02-01 2001   SS 375 : Part 2 : 2 : 1 : 2001 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water - Methods of test - Odour and flavour of water - General method of test 13.060.20  
SS 00375-02-02-02 2001   SS 375 : Part 2 : 2 : 2 : 2001 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water - Methods of test - Odour and flavour of water - Method of testing odours and flavours imparted to wa 13.060.20  
SS 00375-02-02-03 2001   SS 375 : Part 2 : 2 : 3 : 2001 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water - Methods of test - Odour and flavour of water 13.060.20  
SS 00375-02-03 2001   SS 375 : Part 2 : 3 : 2001 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water - Methods of test - Appearance of water 13.060.20  
SS 00375-02-04 2001   SS 375 : Part 2 : 4 : 2001 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water - Methods of test - Growth of aquatic microorganisms test 07.100.20;
13.060.20
 
SS 00375-02-05 2001   SS 375 : Part 2 : 5 : 2001 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water - Methods of test - The extraction of substances that may be of concern to public health 13.060.20  
SS 00375-02-06 2001   SS 375 : Part 2 : 6 : 2001 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water - Methods of test - The extraction of metals 13.060.20  
SS 00375-03 2001   SS 375 : Part 3 : 2001 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water - High temperature tests 13.060.20  
SS 00376 1995   SS 376 : 1995 Construction information indexing 01.040.91  
SS 00377-01 1995   SS 377 : Part 1 : 1995 [withdrawn]
D.C. supplied electronic ballasts for tubular fluorescent lamps - General and safety requirements
Amendment No. 1, February 1995
29.140.30 IEC 60924 : 1990 (NEQ)
SS 00378 1996   SS 378 : 1996 Low capacity WC flushing cisterns up to 4.5L maximum 91.140.70  
SS 00379 1996   SS 379 : 1996 Vitreous china WC pans for use with low capacity WC flushing cisterns up to 4.5L maximum
Amendment No. 1, January 2004
91.140.70  
SS 00380-01 1996   SS 380 : Part 1 : 1996 [withdrawn => SS 490 Part 2-3:2002]
A.C. supplied electronic ballasts for tubular fluorescent lamps - General and safety requirements
29.140.30  
SS 00380-02 1996   SS 380 : Part 2 : 1996 A.C. supplied electronic ballasts for tubular fluorescent lamps - Performance requirements 29.140.30 Identical adoption of IEC 60929 : 1990
SS 00381 1996   SS 381 : 1996 Materials and performance tests for aluminium curtain walls 91.060.10  
SS 00382-01 1996   SS 382 : Part 1 : 1996 [withdrawn]
Shipbuilding and marine structures - Filling connection for drinking water tanks - General requirements
47.020.30 Identical adoption of ISO 5620-1 : 1992
SS 00382-02 1996   SS 382 : Part 2 : 1996 [withdrawn]
Shipbuilding and marine structures - Filling connection for drinking water tanks - Components
47.020.30 Identical adoption of ISO 5620-2 : 1992
SS 00383 1996   SS 383 : 1996 [withdrawn]
Shipbuilding - Welded bulkhead pieces with flanges for steel pipework - PN 6, PN 10 and PN 16
47.020.30 Identical adoption of ISO 5625 : 1978
SS 00384 1996   SS 384 : 1996 [withdrawn]
Shipbuilding - Strum boxes
47.020.30 Identical adoption of ISO 6454 : 1984
SS 00385 1996   SS 385 : 1996 [withdrawn]
Eye plates for ships
47.020.50  
SS 00386 1996   SS 386 : 1996 [withdrawn]
Shipbuilding and marine structures - Toughened safety glass panes for rectangular windows and side scuttles - Punch method of non-destructive strength testing
47.020.10 Identical adoption of ISO 614 : 1989
SS 00387 1996   SS 387 : 1996 [withdrawn]
Shipbuilding and marine structures - Toughened safety glass panes for side scuttles
47.020.10 Identical adoption of ISO 1095 : 1989
SS 00388 1996   SS 388 : 1996 [withdrawn]
Shipbuilding - Ship's side scuttle
47.020.10 Identical adoption of ISO 1751 : 1993
SS 00389 1996   SS 389 : 1996 [withdrawn]
Shipbuilding and marine structures - Toughened safety glass panes for rectangular windows
47.020.10 Identical adoption of ISO 3254 : 1989
SS 00390 1996   SS 390 : 1996 [withdrawn]
Shipbuilding and marine structures - Heated glass panes for ship
47.020.90 Identical adoption of ISO 3434 : 1992
SS 00391 1996   SS 391 : 1996 [withdrawn]
Shipbuilding and marine structures - Gaskets for rectangular windows side scuttles
47.020.10 Identical adoption of ISO 3902 : 1990
SS 00392 1996   SS 392 : 1996 [withdrawn]
Shipbuilding - Ship
47.020.10 Identical adoption of ISO 3903 : 1993
SS 00393 1996   SS 393 : 1996 [withdrawn]
Shipbuilding and marine structures - Clear-view screens
47.020.10 Identical adoption of ISO 3904 : 1990
SS 00394 1996   SS 394 : 1996 [withdrawn]
Shipbuilding and marine structures - Windows and side scuttles for fire-resistant constructions - Specification - "B" class divisions
47.020.10 Identical adoption of ISO 5797-1 : 1989
SS 00395 1996   SS 395 : 1996 [withdrawn]
Shipbuilding and marine structures - Windows and side scuttles - Vocabulary
47.020.10 Identical adoption of ISO 6345 : 1990
SS 00396 1997   SS 396 : 1997 Vitreous china WC pans for use with 6 L flush valves 91.140.70  
SS 00397-01 1997   SS 397 : Part 1 : 1997 Methods of testing cement - Determination of strength 91.100.10  
SS 00397-02 1997   SS 397 : Part 2 : 1997 Methods of testing cement - Chemical analysis of cement 91.100.10  
SS 00397-03 1997   SS 397 : Part 3 : 1997 Methods of testing cement - Determination of setting time and soundness 91.100.10  
SS 00397-06 1997   SS 397 : Part 6 : 1997 Methods of testing cement - Determination of fineness
Amendment No. 1, August 1999
91.100.10  
SS 00397-07 1997   SS 397 : Part 7 : 1997 Methods of testing cement - Method of taking and preparing samples of cement 91.100.10  
SS 00397-21 1997   SS 397 : Part 21 : 1997 Methods of testing cement - Determination of the chloride, carbon dioxide and alkali content of cement
Amendment No. 1, August 1999
91.100.10  
SS 00398-01 1999   SS 398 : Part 1 : 1999 [withdrawn => Refer directly to IEC 60947-1:2001]
Low-voltage switchgear and controlgear - General rules
29.120.40;
29.130.20
Identical adoption of IEC 60947-1 : 1999-02
SS 00398-02 1999   SS 398 : Part 2 : 1999 [withdrawn => Refer directly to IEC 60947-2:2003]Low-voltage switchgear and controlgear - Circuit breakers 29.130.20 Identical adoption of IEC 60947-2 : 1995
SS 00398-03 1999   SS 398 : Part 3 : 1999 [withdrawn => Refer directly to IEC 60947-3:2001]
Low-voltage switchgear and controlgear - Switches, disconnectors, switch-disconnectors and fuse-combination units
29.120.40;
29.130.20
Identical adoption of IEC 60947-3 : 1999
SS 00398-04-01 1997   SS 398 : Part 4 : 1 : 1997 [withdrawn => Refer directly to IEC 60947-4-1:2002]
Low-voltage switchgear and controlgear - Contactors and motor-starters, electromechanical contactors and motor-starters
29.130 Identical adoption of IEC 60947-4-1 : 1990
SS 00399 1997   SS 399 : 1997 Litter bins 13.030.40  
Sort Mk 規格番号 Top規格名称(英語) 国際規格分類
( ICSコードの説明 )
国際整合
( IDT,MOD,NEQ等の説明 )
SS 00400 1997   SS 400 : 1997 LP gas and non-refillable gas canisters for portable gas cookers
Erratum No. 1, April 1998
75.2  
SS 00401 1997   SS 401 : 1997 Portable gas cookers - General specifications and test methods 75.2  
SS 00402-01 1997   SS 402 : Part 1 : 1997 Industrial safety belts and harnesses - General requirements 13.340.01  
SS 00402-02 1997   SS 402 : Part 2 : 1997 Industrial safety belts and harnesses - Permanent anchors 13.340.99  
SS 00403 1997   SS 403 : 1997 13A fused connection units switched and unswitched 29.120.30  
SS 00404-01 1997   SS 404 : Part 1 : 1997 Power transformers - General
Amendment No. 1, July 2000
29.180 Identical adoption of IEC 60076-1 : 1993
SS 00404-02 1997   SS 404 : Part 2 : 1997 Power transformers - Temperature rise 29.180 Identical adoption of IEC 60076-2 : 1993
SS 00404-03 2001   SS 404 : Part 3 : 2001 Power transformers - Insulation levels and dielectric tests and external clearances in air 29.180 Identical adoption of IEC 60076-3 : 2000-03
SS 00404-03-01 1998   SS 404 : Part 3 : 1 : 1998 [withdrawn => SS404 part 3:2001]
Power transformers - External clearances in air
29.180 Identical adoption of IEC 60076-3-1 : 1987
SS 00404-05 2001   SS 404 : Part 5 : 2001 Power transformers - Ability to withstand short circuit 29.180 Identical adoption of IEC 60076-5 : 2000-7
SS 00404-08 2000   SS 404 : Part 8 : 2000 Power transformers - Application guide 29.180 Identical adoption of IEC 60076-8 : 1997
SS 00405 1998   SS 405 : 1998 [Not Available]
Single-use rubber examination gloves
Amendment No. 1, February 1998
11.140 Modified adoption of ISO 11193 : 1994
SS 00406 1998   SS 406 : 1998 [Not Available]
Single-use sterile surgical rubber gloves
Amendment No. 1, February 1998
11.140 Modified adoption of ISO 10282 : 1994
SS 00407 1998   SS 407 : 1998 [withdrawn]
Shipbuilding - Deck machinery - General requirements
47.020.50 Identical adoption of ISO 7825 : 1985
SS 00408 1998   SS 408 : 1998 [withdrawn]
Shipbuilding - Cargo winches
47.020.40 Identical adoption of ISO 3078 : 1987
SS 00409 1998   SS 409 : 1998 [withdrawn]
Shipbuilding - Mooring winches
47.020.50 Identical adoption of ISO 3730 : 1988
SS 00410 1998   SS 410 : 1998 [withdrawn]
Shipbuilding - Sea-going vessels - Windlasses and anchor capstans
47.040 Identical adoption of ISO 4568 : 1986
SS 00411 1998   SS 411 : 1998 [withdrawn]
Shipbuilding and marine structures - Winches for lifeboats
47.020.50 Identical adoption of ISO 6067 : 1985
SS 00412 1998   SS 412 : 1998 [withdrawn]
Shipbuilding - Trawl winches
47.020.50 Identical adoption of ISO 6115 : 1988
SS 00413 1998   SS 413 : 1998 [withdrawn]
Shipbuilding - Topping winches
47.020.50 Identical adoption of ISO 6555 : 1988
SS 00414 1998   SS 414 : 1998 [withdrawn]
Shipbuilding and marine structures - Deck machinery - Accommodation ladder winches
47.020.50 Identical adoption of ISO 7364 : 1983
SS 00415 1998   SS 415 : 1998 [withdrawn]
Shipbuilding and marine structures - Deck machinery - Towing winches for deep sea use
47.020.50 Identical adoption of ISO 7365 : 1983
SS 00416 1998   SS 416 : 1998 [withdrawn]
Shipbuilding - Cable stoppers
47.020.50 ISO 6325 : 1987
SS 00417 1998   SS 417 : 1998 [withdrawn]
Shipbuilding - Deck machinery - Warping end profiles
47.020.50 ISO 6482 : 1980
SS 00418 1998   SS 418 : 1998 [withdrawn]
Shipbuilding - Pilot ladders
47.020.10 ISO 799 : 1986
SS 00419 1998   SS 419 : 1998 [withdrawn]
Vertical steel ladder for ships
47.020.10  
SS 00420 1998   SS 420 : 1998 [withdrawn]
Shipbuilding and marine structures - Rungs for dog-step ladders
47.020.10 ISO 9519 : 1990
SS 00421 1998   SS 421 : 1998 [withdrawn]
Shipbuilding - Guardrails for cargo ships
47.020.10 ISO 5480 : 1979
SS 00422 1998   SS 422 : 1998 [withdrawn]
Manholes for ships
47.020.10  
SS 00423 1998   SS 423 : 1998 [withdrawn]
Shipbuilding - Welded steel bollards
47.06 ISO 3913 : 1977
SS 00424 1998   SS 424 : 1998 [withdrawn]
Ship’s bridge layout and associated equipment - Requirements and guidelines
47.020.10 ISO 8468 : 1990
SS 00425 1998   SS 425 : 1998 Sideguards for motor vehicles with maximum laden weight of more than 3500 kg (including semi-trailers, trailers and buses) 43.040.60  
SS 00426 1998   SS 426 : 1998 Rear underrun protection devices for motor vehicles with maximum laden weight of more than 3 500 kg (including semi-trailers, trailers and buses) 43.040.60  
SS 00427 1998   SS 427 : 1998 Steel bars for reinforcement of concrete - Bend and rebend tests 91.080.40 ISO 10065 : 1990
SS 00428 1998   SS 428 : 1998 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment 33.1 IEC CISPR 15 : 1996
SS 00429 1998   SS 429 : 1998 [withdrawn]
Shipbuilding - Indication of details on the general arrangement plans of ships
47.020.01 ISO 1964 : 1987
SS 00430 1998   SS 430 : 1998 [withdrawn]
Shipbuilding - Colours of indicator lights
47.020.70 ISO 2412 : 1982
SS 00431-01 1998   SS 431 : Part 1 : 1998 [withdrawn]
Shipbuilding - Co-ordination of dimensions in ships accommodation - Principles of dimensional co-ordination
47.020.80 ISO 3827-1 : 1977
SS 00431-02 1998   SS 431 : Part 2 : 1998 [withdrawn]
Shipbuilding - Co-ordination of dimensions in ships accommodation - Glossary of terms
47.020.80 ISO 3827-2 : 1977
SS 00431-03 1998   SS 431 : Part 3 : 1998 [withdrawn]
Shipbuilding - Co-ordination of dimensions in ships accommodation - Co-ordinating sizes for components and assembles
47.020.80 ISO 3827-3 : 1977
SS 00431-04 1998   SS 431 : Part 4 : 1998 [withdrawn]
Shipbuilding - Co-ordination of dimensions in ships accommodation - Controlling dimensions
47.020.80 ISO 3827-4 : 1977
SS 00431-05 1998   SS 431 : Part 5 : 1998 [withdrawn]
Shipbuilding - Co-ordination of dimensions in ships accommodation - Co-ordinating sizes for key components
47.020.80 ISO 3827-5 : 1979
SS 00432 1998   SS 432 : 1998 [withdrawn]
Shipbuilding and marine structures - Deck machinery - Vocabulary
47.020.50 ISO 3828 : 1984
SS 00433 1998   SS 433 : 1998 [withdrawn]
Shipbuilding and marine structures - Numbering equipment and structural elements in ships
47.020.01 ISO 5572 : 1987
SS 00434 1998   SS 434 : 1998 [withdrawn]
Shipbuilding - Bilge mud boxes for machinery spaces - General design characteristics
47.020.30 ISO 5621 : 1984
SS 00435 1998   SS 435 : 1998 [withdrawn]
Shipbuilding and marine structures - Eye and fork assemblies under tension load - Main dimensions
47.020.40 ISO 6043 : 1985
SS 00436 1998   SS 436 : 1998 [withdrawn]
Shipbuilding - Bulbous bow and side thruster symbols
47.020.10 ISO 6050 : 1987
SS 00437 1998   SS 437 : 1998 [withdrawn]
Shipbuilding - Shiplines - Identification of geometric data
47.020.10 ISO 7460 : 1983
SS 00438 1998   SS 438 : 1998 [withdrawn]
Shipbuilding - Shiplines - Numerical representation of elements of the hull geometry
47.020.10 ISO 7461 : 1984
SS 00439 1998   SS 439 : 1998 [withdrawn]
Shipbuilding - Shiplines - Formats and data organisation
47.020.10 ISO 7838 : 1984
SS 00440-01 1998   SS 440 : Part 1 : 1998 [withdrawn]
Shipbuilding - Topology of ship hull structure elements - Location of elements
47.020.10 ISO 9203-1 : 1989
SS 00440-02 1998   SS 440 : Part 2 : 1998 [withdrawn]
Shipbuilding - Topology of ship hull structure elements - Description of elements
47.020.10 ISO 9203-2 : 1989
SS 00440-03 1998   SS 440 : Part 3 : 1998 [withdrawn]
Shipbuilding - Topology of ship hull structure elements - Relations of elements
47.020.10 ISO 9203-3 : 1989
SS 00441 1998   SS 441 : 1998 [Not Available]
Packaging material standards for ESD sensitive items
31.020;
55.040
ANSI/EIA-541-1988
SS 00442-01 1998   SS 442 : Part 1 : 1998 [Not Available]
Paper sacks - Packaging - Method of specification for sacks
55.080 ISO 8351-1 : 1994
SS 00442-02 1998   SS 442 : Part 2 : 1998 [Not Available]
Paper sacks - Packaging - Vocabulary and types
55.080 ISO 6590-1 : 1983
SS 00442-03 1998   SS 442 : Part 3 : 1998 [Not Available]
Paper sacks - Packaging - Dimensional tolerances for general purpose sacks
55.080 ISO 8367-1 : 1993
SS 00442-04 1998   SS 442 : Part 4 : 1998 [Not Available]
Paper sacks - Packaging - Description and method of measurement
55.080 ISO 6591-1 : 1984
SS 00442-05 1998   SS 442 : Part 5 : 1998 [Not Available]
Paper sacks - Packaging - Method of sampling empty sacks for testing
55.080 ISO 7023 : 1983
SS 00442-06 1998   SS 442 : Part 6 : 1998 [Not Available]
Paper sacks - Packaging - Conditioning for testing
55.08 ISO 6599-1 : 1983
SS 00442-07 1998   SS 442 : Part 7 : 1998 [Not Available]
Paper sacks - Packaging - Drop test
55.08 ISO 7965-1 : 1984
SS 00443-01 1998   SS 443 : Part 1 : 1998 [withdrawn => Refer directly to IEC 60502-1 Ed 1.1:1998-11]
Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1.2 kV) up to 30 kV (Um = 36 kV) - Cables for rated voltages of 1 kV (Um = 1.2 kV) and 3 kV (Um = 3.6 kV)
29.060.20 IEC 60502-1 : 1997
SS 00444 1998   SS 444 : 1998 Hazard analysis and critical control point (HACCP) system and guidelines for its application 67.02  
SS 00445 1998   SS 445 : 1998 Alarm systems - Alarm systems for road vehicles – Passenger cars
Erratum No. 1, May 1999
13.320;
43.020
IEC 60839-10-1 : 1995
SS 00446 1998   SS 446 : 1998 Flowmeter regulators used on cylinders for welding, cutting and allied processes – Classification and specifications 25.160.30 ISO 7292 : 1997
SS 00447 1998   SS 447 : 1998 Gas cylinders – Terminology 01.040.23;
23.020.30
ISO 10286 : 1996
SS 00448-01 1998   SS 448 : Part 1 : 1998 Performance of draw-off taps with metal or plastic bodies for water services - Dimensional and design characteristics 91.140.70  
SS 00448-02 1998   SS 448 : Part 2 : 1998 Performance of draw-off taps with metal or plastic bodies for water services - Water tightness and pressure resistance characteristics 91.140.70  
SS 00448-03 1998   SS 448 : Part 3 : 1998 Performance of draw-off taps with metal or plastic bodies for water services - Hydraulic characteristics 91.140.70  
SS 00448-04 1998   SS 448 : Part 4 : 1998 Performance of draw-off taps with metal or plastic bodies for water services - Mechanical and endurance characteristics 91.140.70  
SS 00448-05 1998   SS 448 : Part 5 : 1998 Performance of draw-off taps with metal or plastic bodies for water services - Physio-chemical characteristics : Materials, coatings 91.140.70  
SS 00449 1998   SS 449 : 1998 [withdrawn]
Shipbuilding - Specification for accommodation ladders
47.020.80 ISO 5488 : 1979
SS 00450 1998   SS 450 : 1998 [withdrawn]
Shipbuilding - Specification for aluminium shore gangways for seagoing vessels
47.040 ISO 7061 : 1993
SS 00451 1998   SS 451 : 1998 [withdrawn]
Shipbuilding - Specification for embarkation ladders
47.020.10 ISO 5489 : 1986
SS 00452 1998   SS 452 : 1998 [withdrawn]
Shipbuilding - Ship screw propellers - List of equivalent terms
01.040.47;
47.020.20
ISO 3715 : 1978
SS 00453-01 1998   SS 453 : Part 1 : 1998 [withdrawn]
Shipbuilding - Ship screw propellers - Manufacturing tolerances - Propellers of diameter greater than 2.50 m
47.020.20 ISO 484-1 : 1981
SS 00453-02 1998   SS 453 : Part 2 : 1998 [withdrawn]
Shipbuilding - Ship screw propellers - Manufacturing tolerances - Propellers of diameter between 0.80 m and 2.50 m
47.020.20 ISO 484-2 : 1981
SS 00454 1998   SS 454: 1998 [withdrawn]
Ships and marine technology - Specification for magnetic compasses, binnacles and azimuth reading devices - Class A
47.020.70 ISO 449 : 1997
SS 00455 1998   SS 455: 1998 Disposable microwavable plastic containers for food 55.040;
67.250
 
SS 00456 1999   SS 456 : 1999 Metallic materials – Tensile testing at ambient temperature 77.040.10 ISO 6892 : 1997
SS 00457 1999   SS 457 : 1999 Playground equipment for public use
Erratum No. 1, February 2000
Erratum No. 2, April 2001
Amendment No. 1, September 2003
97.200.40  
SS 00458 1999   SS 458 : 1999 [withdrawn => Refer directly to IEC CISPR 24:1997]
Information technology equipment – Immunity characteristics – Limits and methods of measurement
33.1 IEC CISPR 24 : 1997
SS 00459 1999   SS 459 : 1999 Guidelines for residual solvents in food packaging materials 55.040;
67.250
 
SS 00460 1999   SS 460 : 1999 [Not Available]
Pictorial marking for handling of goods
01.080.99 ISO 780 : 1985
SS 00461-01 1999   SS 461 : Part 1 : 1999 [withdrawn?]
Information technology ・Coding of moving pictures and associated audio for digital storage media at up to about 1.5 Mbit/s - Systems
35.040 ISO/IEC 11172-1 : 1993
(Contact SPRING Singapore for more information)
SS 00461-02 1999   SS 461 : Part 2 : 1999 [withdrawn?]
Information technology ・Coding of moving pictures and associated audio for digital storage media at up to about 1.5 Mbit/s - Video
35.040 ISO/IEC 11172-2 : 1993
(Contact SPRING Singapore for more information)
SS 00461-03 1999   SS 461 : Part 3 : 1999 [withdrawn?]
Information technology ・Coding of moving pictures and associated audio for digital storage media at up to about 1.5 Mbit/s - Audio
35.040 ISO/IEC 11172-3 : 1993
(Contact SPRING Singapore for more information)
SS 00461-04 1999   SS 461 : Part 4 : 1999 [withdrawn?]
Information technology ・Coding of moving pictures and associated audio for digital storage media at up to about 1.5 Mbit/s - Conformance testing
35.040 ISO/IEC 11172-4 : 1995
(Contact SPRING Singapore for more information)
SS 00462-01 1999   SS 462 : Part 1 : 1999 [withdrawn?]
Information technology - Generic coding of moving pictures and associated audio information - Systems
35.040 ISO/IEC 13818-1 : 1996
(Contact SPRING Singapore for more information)
SS 00462-02 1999   SS 462 : Part 2 : 1999 [withdrawn?]
Information technology - Generic coding of moving pictures and associated audio information - Video
35.040 ISO/IEC 13818-2 : 1996
(Contact SPRING Singapore for more information)
SS 00462-03 1999   SS 462 : Part 3 : 1999 [withdrawn?]
Information technology - Generic coding of moving pictures and associated audio information - Audio
35.040 ISO/IEC 13818-3 : 1998
(Contact SPRING Singapore for more information)
SS 00462-06 1999   SS 462 : Part 6 : 1999 [withdrawn?]
Information technology - Generic coding of moving pictures and associated audio information - Extensions for DSM-CC
35.040 ISO/IEC 13818-6 : 1998
(Contact SPRING Singapore for more information)
SS 00462-07 1999   SS 462 : Part 7 : 1999 [withdrawn?]
Information technology – Generic coding of moving pictures and associated audio information - Advanced audio coding (AAC)
35.040 ISO/IEC 13818-7 : 1997
(Contact SPRING Singapore for more information)
SS 00462-09 1999   SS 462 : Part 9 : 1999 Information technology – Generic coding of moving pictures and associated audio information - Extension for real time interface for systems decoders 35.040 ISO/IEC 13818-9 : 1996
(Contact SPRING Singapore for more information)
SS 00463-01 1999   SS 463 : Part 1 : 1999 National information infrastructure (NII) standards - Overview of architecture 35.100  
SS 00463-02 1999   SS 463 : Part 2 : 1999 National information infrastructure (NII) standards - Network 35.100.30  
SS 00463-03 1999   SS 463 : Part 3 : 1999 National information infrastructure (NII) standards - Security 35.04  
SS 00463-04 1999   SS 463 : Part 4 : 1999 National information infrastructure (NII) standards - Electronic mail and directory 35.100.70  
SS 00463-05 1999   SS 463 : Part 5 : 1999 National information infrastructure (NII) standards - Electronic commerce 35.100.70  
SS 00463-06 1999   SS 463 : Part 6 : 1999 National information infrastructure (NII) standards - Information sources and exchange 35.04  
SS 00464 1999   SS 464 : 1999 Sugar confectionery 67.180.10  
SS 00465 1999   SS 465 : 1999 [withdrawn => Refer directly to IEC CISPR 13:2003]
Limits and method of measurement of radio interference characteristic of sound and television broadcast receivers and associated equipment
33.100.10 IEC CISPR 13 : 1996
SS 00466 1999   SS 466 : 1999 Kaya 67.100.99  
SS 00467 2002   SS 467 : 2002 Smart card reader application program interface (API) 35.080;
35.180
 
SS 00468 1999   SS 468 : 1999 Stored value card application 35.240.15  
SS 00469-01 1999   SS 469 : Part 1 : 1999 [withdrawn => Refer directly to IEC 62326]
Printed boards - Generic specification
31.18 IEC 62326-1 : 1996
SS 00469-04 1999   SS 469 : Part 4 : 1999 [withdrawn => Refer directly to IEC 62326]
Printed boards - Rigid multilayer printed boards with interlayer connections - Sectional specification
31.18 IEC 62326-4 : 1996
SS 00469-04-01 1999   SS 469 : Part 4 : 1 : 1999 [withdrawn => Refer directly to IEC 62326]
Printed boards - Rigid multilayer printed boards with interlayer connections - Sectional specification - Capability detail specification – Performance levels A, B and C
31.18 IEC 62326-4-1 : 1996
SS 00470-01 1999   SS 470 : Part 1 : 1999 Hot-finished structural hollow sections of non-alloy and fine grain structural steels - Technical delivery requirements 77.14  
SS 00470-02 1999   SS 470 : Part 2 : 1999 Hot-finished structural hollow sections of non-alloy and fine grain structural steels - Tolerances, dimensions and sectional properties 77.14  
SS 00471 1999   SS 471 : 1999 Edison screw lampholders 29.140.10 IEC 60238 : 1998-09
SS 00472 1999   SS 472 : 1999 15A plugs and switched socket-outlets for domestic and similar purposes
Erratum No. 1, October 2001
29.120.30  
SS 00473-01 1999   SS 473 : Part 1 : 1999 Personal eye-protectors - General requirements 13.340.20  
SS 00473-02 1999   SS 473 : Part 2 : 1999 Personal eye-protectors - Selection, use and maintenance 13.340.20  
SS 00474-01 2000   SS 474 : Part 1 : 2000 Safety of toys - Mechanical and physical properties 97.200.50  
SS 00474-02 2000   SS 474 : Part 2 : 2000 Safety of toys - Flammability 97.200.50  
SS 00474-03 2000   SS 474 : Part 3 : 2000 Safety of toys - Migration of certain elements 97.200.50  
SS 00474-04 2000   SS 474 : Part 4 : 2000 Safety of toys - Experimental sets for chemistry and related activities 97.200.50  
SS 00474-05 2000   SS 474 : Part 5 : 2000 Safety of toys - Chemical toys (sets) other than experimental sets 97.200.50  
SS 00474-06 2000   SS 474 : Part 6 : 2000 Safety of toys - Graphical symbol for age warning labelling 97.200.50  
SS 00475-01 2000   SS 475 : Part 1 : 2000 Steel for the prestressing of concrete - General requirements 77.140.15;
91.080.40
ISO 6934-1 : 1991
SS 00475-02 2000   SS 475 : Part 2 : 2000 Steel for the prestressing of concrete - Cold-drawn wire 77.140.15;
91.080.40
ISO 6934-2 : 1991
SS 00475-03 2000   SS 475 : Part 3 : 2000 Steel for the prestressing of concrete - Quenched and tempered wire 77.140.15;
91.080.40
ISO 6934-3 : 1991
SS 00475-04 2000   SS 475 : Part 4 : 2000 Steel for the prestressing of concrete - Strand 77.140.15;
91.080.40
ISO 6934-4 : 1991
SS 00475-05 2000   SS 475 : Part 5 : 2000 Steel for the prestressing of concrete - Hot-rolled steel bars with or without subsequent processing 77.140.15;
91.080.40
ISO 6934-5 : 1991
SS 00476 2000   SS 476 : 2000 High slag blastfurnace cement 91.100.10  
SS 00477 2000   SS 477 : 2000 Portland blastfurnace cements 91.100.10  
SS 00478-00 2000   SS 478 : Part 0 : 2000 [Not Available]
Quantities and units - General principles
01.060 ISO 31-0 : 1992
SS 00478-01 2000   SS 478 : Part 1 : 2000 [Not Available]
Quantities and units - Space and time
01.060 ISO 31-1 : 1992
SS 00478-02 2000   SS 478 : Part 2 : 2000 [Not Available]
Quantities and units - Periodic and related phenomena
01.060 ISO 31-2 : 1992
SS 00478-03 2000   SS 478 : Part 3 : 2000 [Not Available]
Quantities and units - Mechanics
01.060 ISO 31-3 : 1992
SS 00478-04 2000   SS 478 : Part 4 : 2000 [Not Available]
Quantities and units - Heat
01.060 ISO 31-4 : 1992
SS 00478-05 2000   SS 478 : Part 5 : 2000 [Not Available]
Quantities and units - Electricity and magnetism
01.060 ISO 31-5 : 1992
SS 00478-06 2000   SS 478 : Part 6 : 2000 [Not Available]
Quantities and units - Light and related electromagnetic radiations
01.060 ISO 31-6 : 1992
SS 00478-07 2000   SS 478 : Part 7 : 2000 [Not Available]
Quantities and units - Acoustics
01.060 ISO 31-7 : 1992
SS 00478-08 2000   SS 478 : Part 8 : 2000 [Not Available]
Quantities and units - Physical chemistry and molecular physics
01.060 ISO 31-8 : 1992
SS 00478-09 2000   SS 478 : Part 9 : 2000 [Not Available]
Quantities and units - Atomic and nuclear physics
01.060 ISO 31-9 : 1992
SS 00478-10 2000   SS 478 : Part 10 : 2000 [Not Available]
Quantities and units - Nuclear reactions and ionizing radiations
01.060 ISO 31-10 : 1992
SS 00478-11 2000   SS 478 : Part 11 : 2000 [Not Available]
Quantities and units - Mathematical signs and symbols for use in the physical sciences and technology
01.060 Identical adoption of ISO 31-11 : 1992
SS 00478-12 2000   SS 478 : Part 12 : 2000 [Not Available]
Quantities and units - Characteristic numbers
01.060 ISO 31-12 : 1992
SS 00478-13 2000   SS 478 : Part 13 : 2000 [Not Available]
Quantities and units - Solid state physics
01.060 ISO 31-13 : 1992
SS 00479 2000   SS 479 : 2000 Glow-starters for fluorescent lamps 29.140.30 IEC 60155 : 1993-11
SS 00480-01 2000   SS 480 : Part 1 : 2000 Residual current operated circuit-breaker with integral overcurrent protection for household and similar uses (RCBOs) - General rules 29.120.50 Modified adoption of IEC 61009-1 : 1996-12
SS 00481-01 2000   SS 481 : Part 1 : 2000 [Not Available]
Medical electrical equipment - General requirements for safety
11.040 Modified adoption of IEC 60601-1 : 1988
SS 00482-01 2000   SS 482 : Part 1 : 2000 Low voltage switchgear and controlgear assemblies - Type-tested and partially type-tested assemblies 29.130.20 Identical adoption of IEC 60439-1 : 1999
SS 00482-02 2000   SS 482 : Part 2 : 2000 Low voltage switchgear and controlgear assemblies - Particular requirements for busbar trunking systems (buyways) 29.130.20 Identical adoption of IEC 60439-2 : 2000
SS 00483 2000   SS 483 : 2000 Ceramic tiles - Definitions, classification, characteristics and marking
Erratum No. 1, July 2001
01.040.91;
91.100.25
Identical adoption of ISO13006 : 1998
SS 00484 2000   SS 484 : 2000 Debit and credit card applications on smart card 35.240.15;
35.240.40
 
SS 00485 2001   SS 485 : 2001 Slip resistance classification of public pedestrian surface materials 93.080.20  
SS 00486-04-02 2001   SS 486 : Part 4 : 2 : 2001 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Electrostatic discharge immunity test 33.100.20 Identical adoption of IEC 61000-4-2 : 1995
SS 00486-04-03 2001   SS 486 : Part 4 : 3 : 2001 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Radiated, radio-frequency, electromatnetic field immunity test 25.040.40;
33.100.20
Identical adoption of IEC 61000-4-3 : 1995-02
SS 00486-04-04 2001   SS 486 : Part 4 : 4 : 2001 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Electrical fast transient/burst immunity test - Basic EMC publication 33.100 Identical adoption of IEC 61000-4-4 : 1995-01
SS 00486-04-05 2001   SS 486 : Part 4 : 5 : 2001 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Surge immunity test 25.040.40;
33.100
Identical adoption of IEC 61000-4-5 : 1995-02
SS 00486-04-06 2001   SS 486 : Part 4 : 6 : 2001 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields 33.100 Identical adoption of IEC 61000-4-6 : 1996-03
SS 00486-04-08 2001   SS 486 : Part 4 : 8 : 2001 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Power frequency magnetic field immunity test - Besic EMC publication 33.100.20 Identical adoption of IEC 61000-4-8 : 1993-06
SS 00486-04-09 2001   SS 486 : Part 4 : 9 : 2001 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Pulse magnetic field immunity test - Basic EMC publication 33.100.20 Identical adoption of IEC 61000-4-9 : 1993-06
SS 00486-04-10 2001   SS 486 : Part 4 : 10 : 2001 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Damped oscillatory magnetic field immunity test - Basic EMC publication 33.100.20 Identical adoption of IEC 61000-4-10 : 1993-06
SS 00486-04-11 2001   SS 486 : Part 4 : 11 : 2001 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests 33.100.20 Identical adoption of IEC 61000-4-11 : 1994-06
SS 00487 2001   SS 487 : 2001 Chillies and capsicums, whole or ground (powered) 67.220.10 Modified adoption of ISO 972 : 1997
SS 00488 2001   SS 488 : 2001 Portable 2-pin socket-outlets for class II equipment for household and similar purposes 29.120.30  
SS 00489 2001   SS 489 : 2001 Fire shutters 13.200.50  
SS 00490-01 2001   SS 490 : Part 1 : 2001 Lamp controlgear - General and safety requirements 29.140.99 Identical adoption of IEC 61347-1 : 2000-10
SS 00490-02-03 2002   SS 490 : Part 2 : 3 : 2002 Lamp controlgear - Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps 29.140.99  
SS 00490-02-04 2001   SS 490 : Part 2 : 4 : 2001 Lamp controlgear - Particular requirements for d.c. supplied electronic ballasts for general lighting 29.140.99 Identical adoption of IEC 61347-2-4 : 2000
SS 00490-02-07 2001   SS 490 : Part 2 : 7 : 2001 Lamp controlgear - Particular requirements for d.c. supplied electronic ballasts for emergency lighting 29.140.99 Identical adoption of IEC 61347-2-7 : 2000
SS 00490-02-08 2001   SS 490 : Part 2 : 8 : 2001 Lamp controlgear - Particular requirements for ballasts for fluorescent lamps 29.140.99 Identical adoption of IEC 61347-2-8 : 2000-10
SS 00491 2001   SS 491 : 2001 Ballasts for tubular fluorescent lamps, performance requirements 29.140.30 Identical adoption of IEC 60921 : 1988
SS 00492 2001   SS 492 : 2001 Performance requirements for strength and robustness (including methods of test) for partition walls 19.060;
91.060.10
 
SS 00493-01 2001   SS 493 : Part 1 : 2001 IT security standards framework - An overview 35.040  
SS 00494 2001   SS 494 : 2001 Lead and chromate-free primer for iron and steel substrates 87.040  
SS 00495 2001   SS 495 : 2001 Impact attenuation of surface systems under and around playground equipment 97.200.40  
SS 00496-01 2001   SS 496 : Part 1 : 2001 eLearning framework - An overview 35.240.99  
SS 00496-02 2001   SS 496 : Part 2 : 2001 eLearning framework - Learning resource identification 35.240.99  
SS 00496-03 2003   SS 496 : Part 3 : 2003 eLearning framework - Learning content packaging 35.240.99  
SS 00496-04 2003   SS 496 : Part 4 : 2003 eLearning framework - Assessment and performance tracking 35.240.99  
SS 00496-05 2004   SS 496 : Part 5 : 2004 [Temporary not Available : 2004-06]
eLearning framework - eBook publication structure
35  
SS 00496-06 2004   SS 496 : Part 6 : 2004 [Temporary not Available : 2004-06]
eLearning framework - Singapore enterprise integration
35  
SS 00496-08 2005 SS 496 : Part 8 : 2005 eLearning framework - Guidelines on common competencies for e-learning professionals    
SS 00496-09 2005 SS 496 : Part 9 : 2005 eLearning framework - Singapore learner profile    
SS 00497 2002   SS 497 : 2002 Design, safe use and maintenance of overhead travelling cranes 53.020  
SS 00498-01 2002   SS 498 : Part 1 : 2002 Hot-applied thermoplastic road marking materials - Constituent materials and mixtures 93:080:20  
SS 00498-02 2002   SS 498 : Part 2 : 2002 Hot-applied thermoplastic road marking materials - Road performance 93:080:20  
SS 00498-03 2002   SS 498 : Part 3 : 2002 Hot-applied thermoplastic road marking materials - Application of material to road surfaces 93:080:20  
SS 00499 2002   SS 499 : 2002 Cleaning service industry - Cleaning performance for commercial premises 03.080.10  
Sort Mk 規格番号 Top規格名称(英語) 国際規格分類
( ICSコードの説明 )
国際整合
( IDT,MOD,NEQ等の説明 )
SS 00500 2002   SS 500 : 2002 Elastomeric wall coatings 87.040  
SS 00501-01 2003   SS 501 : Part 1 : 2003 Public key infrastructure security standards - Framework overview 35.040  
SS 00502 2003   SS 502 : 2003 Textured coatings for exterior walls 87.020  
SS 00503-01 2003   SS 503 : Part 1 : 2003 Cold formed welded steel structural hollow sections - Technical delivery requirements 77.140  
SS 00503-02 2003   SS 503 : Part 2 : 2003 Cold formed welded steel structural hollow sections - Tolerances, dimensions and sectional properties 77.140  
SS 00504-01 2003   SS 504 : Part 1 : 2003 Conduit systems for cable management - General requirements 29.120.10 Identical adoption of IEC 61386-1 : 1996-11 including IEC Amendment 1 : 2000-11
SS 00504-21 2003   SS 504 : Part 21 : 2003 Conduit systems for cable management - Particular requirements for rigid conduit systems 29.120.10 Identical adoption of IEC 61386-21 : 2002-02
SS 00504-22 2003   SS 504 : Part 22 : 2003 Conduit systems for cable management - Particular requirements for pliable conduit systems 29.120.10 Identical adoption of IEC 61386-22 : 2002-02
SS 00505 2003   SS 505 : 2003 Exhibition management services industry - Exhibition terminology and audit procedures 01.020;
03.080.99
 
SS 00506-01 2004   SS 506 : Part 1 : 2004 Occupational safety and health (OSH) management system - Specification 03.100.01;
13.100
(OHSAS 18001:1999)
SS 00506-02 2004   SS 506 : Part 2 : 2004 Occupational safety and health (OSH) management system - General guidelines for the implementation of OHS management system 03.100.01;
13.100
(OHSAS 18002:1999)
SS 00507 2004   SS 507 : 2004 Business continuity/disaster recovery (BC/DR) service providers 03.100.01;
13.200
 
SS 00508-01 2004   SS 508 : Part 1 : 2004 Graphical symbols - Safety colours and safety signs - Design principles for safety signs in workplaces and public areas 01.080.10 Identical adoption of ISO 3864-1 : 2002
SS 00508-03 2004   SS 508 : Part 3 : 2004 Graphical symbols - Safety colours and safety signs - Safety signs used in workplaces and public areas 01.080.10;
01.080.20
Identical adoption of ISO 7010 : 2003
SS 00509-01 2005 SS 509 : Part 1 : 2005 Code of practice for cleaning and surface repair of buildings - Cleaning of natural stones, brick, terracotta, concrete and rendered finishes 91.040.01  
SS 00509-02 2005 SS 509 : Part 2 : 2005 Code of practice for cleaning and surface repair of buildings - Surface repair of natural stones, brick, terracotta and rendered finishes 91.040.01  
SS 00510 2005 SS 510 : 2005
(formerly CP 50)
Code of practice on safety in welding and cutting (and other operations involving the use of heat) 25.160  
SS 00511 2005 SS 511 : 2005 Code of practice for diving at work 13.100  
SS 00512 2005 SS 512 : 2005 Code of practice for the design, construction and operation of pipeline service corridors    
SS 00513-01 2005 SS 513 : Part 1 : 2005 Personal protective equipment - Footwear - Safety footwear   Identical adoption of ISO 20345 : 2004.
SS 00513-02 2005 SS 513 : Part 2 : 2005 Personal protective equipment - Footwear - Test methods for footwear   Identical adoption of ISO 20344 : 2004.
Sort Mk 規格番号 Top規格名称(英語) 国際規格分類
( ICSコードの説明 )
国際整合
( IDT,MOD,NEQ等の説明 )
SS EN 00420 2003   SS EN 420 : 2003 Protective gloves - General requirements and test methods    
Sort Mk 規格番号 Top規格名称(英語) 国際規格分類
( ICSコードの説明 )
国際整合
( IDT,MOD,NEQ等の説明 )
SS IEC 60326-01 1984   SS IEC 60326 : Part 1 : 1984 [withdrawn]
Printed boards - General information for the specification writer
   
SS IEC 60326-02 1990   SS IEC 60326 : Part 2 : 1990 [Not Available => SS 354 Part 2:1991]
Printed boards - Test methods
   
SS IEC 60326-03 1991   SS IEC 60326 : Part 3 : 1991 [Not Available]
Printed boards - Design and use of printed boards
   
SS IEC 60326-04 1980   SS IEC 60326 : Part 4 : 1980 [withdrawn => Refer directly to IEC 60326]
Printed boards - Single and double sided printed boards with plain holes
31.18  
SS IEC 60326-05 1980   SS IEC 60326 : Part 5 : 1980 [withdrawn => Refer directly to IEC 60326]
Printed boards - Single and double sided printed boards with plated-through holes
31.18  
SS IEC 60326-06 1980   SS IEC 60326 : Part 6 : 1980 [withdrawn]
Printed boards - Multilayer printed boards
   
SS IEC 60326-10 1991   SS IEC 60326 : Part 10 : 1991 [withdrawn => Refer directly to IEC 60326]
Printed boards - Flex-rigid double-sided printed boards with through connections
31.18  
SS IEC 60326-12 1992   SS IEC 60326 : Part 12 : 1992 [withdrawn => Refer directly to IEC 60326]
Printed boards - Mass lamination panels (semi-manufactured multilayer printed boards)
31.18  
SS IEC 60384-04 1985   SS IEC 60384 : Part 4 : 1985 [withdrawn]
Aluminium electrolytic capacitors - Specification for aluminium electrolytic capacitors with solid and non-solid electrolyte
Amendment No. 1, October 1997
31.060.50  
SS IEC 60384-04-01 1985   SS IEC 60384 : Part 4-1 : 1985 [withdrawn]
Aluminium electrolytic capacitors - Blank detail specification: Aluminium electrolytic capacitors with non-solid electrolyte - Assessment level E
Amendment No. 1, October 1997
31.060.50  
SS IEC 60384-04-02 1985   SS IEC 60384 : Part 4-2 : 1985 [withdrawn]
Aluminium electrolytic capacitors - Blank detail specification : Aluminium electrolytic capacitors with solid electrolyte - Assessment level E
Amendment No. 1, October 1997
31.060.50  
SS IEC 60529 1989   SS IEC 60529 : 1989 Degrees of protection provided by enclosures (IP Code)
Amendment No. 1, May 2000
29.100  
SS IEC 60925 1989   SS IEC 60925 : 1989 [withdrawm => Refer directly to IEC 60925:2001]
D.C. supplied electronic ballasts for tubular fluorescent lamps - Performance requirements
29.140.30  
SS IEC 61032 1990   SS IEC 61032 : 1990 [withdrawn => SS 101:1999]
Test probes to verify protection by enclosures
19.080  
Sort Mk 規格番号 Top規格名称(英語) 国際規格分類
( ICSコードの説明 )
国際整合
( IDT,MOD,NEQ等の説明 )
SS IEC CISPR 11 1997   SS IEC CISPR 11 : 1997 [Not Available]
Industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement
33.1 Identical adoption of IEC CISPR 11 : 1997 including IEC Amendment 1 : 1999 (adopted in May 2003)
SS IEC CISPR 13 1990   SS IEC CISPR 13 : 1990 [withdrawn => SS 465 1999]
Limits and methods of measurement of radio interference characteristics of sound and television broadcast receivers and associated equipment
33.1  
SS IEC CISPR 14 1993   SS IEC CISPR 14 : 1993 [withdrawn => Refer directly to IEC CISPR 14-1:2002, IEC CISPR 14-2:2001]
Limits and methods of measurement of radio disturbance characteristics of electrical motor-operated and thermal appliances for household and similar purposes, electric tools and electric apparatus
33.1  
SS IEC CISPR 19 1983   SS IEC CISPR 19 : 1983 [withdrawn => Refer directly to IEC CISPR 19:1983]
Guidance on the use of the substitution method for measurements of radiation from microwave ovens for frequencies above 1 GHz
33.1  
SS IEC CISPR 22 1997   SS IEC CISPR 22 : 1997 [Not Available]
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
33.1 Identical adoption of IEC CISPR 22 : 1997 including IEC Amendment 1 : 2000
Sort Mk 規格番号 Top規格名称(英語) 国際規格分類
( ICSコードの説明 )
国際整合
( IDT,MOD,NEQ等の説明 )
SS ISO 00037 1994   SS ISO 37 : 1994 [Not Available]
Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
83.06  
SS ISO 00048 1994   SS ISO 48 : 1994 [Not Available]
Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD)
83.06  
SS ISO 00128 1982   SS ISO 128 : 1982 [Not Available]
Technical drawings - General principles of presentation
01.100.01  
SS ISO 00188 1982   SS ISO 188 : 1982 Rubber, vulcanized - Accelerated ageing or heat-resistance tests 83.06  
SS ISO 00406 1987   SS ISO 406 : 1987 [Not Available]
Technical drawings - Tolerancing of linear and angular dimension
01.100.01  
SS ISO 00483 1988   SS ISO 483 : 1988 Plastics - Small enclosures for conditioning and testing using aqueous solutions to maintain relative humidity at constant,value 25.22  
SS ISO 00815 1991   SS ISO 815 : 1991 [Not Available]
Rubber, vulcanized or thermoplastic - Determination of compression set at ambient, elevated or low temperatures
83.06  
SS ISO 01000 1992   SS ISO 1000 : 1992 SI units and recommendations for the use of their multiples and of certain other units 1.06  
SS ISO 01101 1983   SS ISO 1101 : 1983 [Not Available]
Technical drawings - Geometrical tolerancing - Tolerancing of form, orientation, location and run-out - Generalities, definitions, symbols, indications on drawings
01.100.20  
SS ISO 01248 1974   SS ISO 1248 : 1974 [Not Available]
Iron oxide pigments for paints
87.060.10  
SS ISO 01431-01 1989   SS ISO 1431-1 : 1989 [Not Available]
Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Static strain test
83.06  
SS ISO 01462 1973   SS ISO 1462 : 1973 Metallic coatings - Coatings other than those anodic to the basis metal - Accelerated corrosion tests - Method for the evaluation of the results    
SS ISO 01463 1982   SS ISO 1463 : 1982 Metallic and oxide coatings - Measurement of coating thickness- Microscopical method 25.220.40  
SS ISO 01660 1982   SS ISO 1660 : 1982 [Not Available]
Technical drawings - Dimensioning and tolerancing of profiles
01.100.20  
SS ISO 01817 1985   SS ISO 1817 : 1985 [Not Available]
Rubber, vulcanized - Determination of the effect of liquids
83.06  
SS ISO 02064 1980   SS ISO 2064 : 1980 Metallic and other non-organic coatings - Definitions and conventions concerning the measurement of thickness 25.22  
SS ISO 02080 1981   SS ISO 2080 : 1981 Electroplating and related processes - Vocabulary 01.040.25;
25.220.40
 
SS ISO 02162 1973   SS ISO 2162 : 1973 [Not Available]
Technical drawings- Representation of springs
01.100.20  
SS ISO 02177 1985   SS ISO 2177 : 1985 Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution 25.220.40  
SS ISO 02178 1982   SS ISO 2178 : 1982 Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method 25.22  
SS ISO 02203 1973   SS ISO 2203 : 1973 [Not Available]
Technical drawings - Conventional representation of gears
01.100.20  
SS ISO 02360 1982   SS ISO 2360 : 1982 Eddy current method for non-conductive coatings on non-magnetic basis metals 25.220.30  
SS ISO 02361 1982   SS ISO 2361 : 1982 Electrodeposited nickel coatings on magnetic and non-magnetic substrates- Measurement of coating thickness- Magnetic method 25.22  
SS ISO 02553 1992   SS ISO 2553 : 1992 [Not Available]
Welded, brazed and soldered joints - Symbolic representation on drawings
01.080.30  
SS ISO 02816 1973   SS ISO 2816 : 1973 [withdrawn]
Fundamental characteristics of a system of shoe sizing to be known as Mondopoint
   
SS ISO 02819 1980   SS ISO 2819 : 1980 Metallic coatings on metallic substrates - Electrodeposited and chemically deposited coatings -Review of methods available for testing adhesion 25.220.40  
SS ISO 02859 1974   SS ISO 2859 : 1974 [withdrawn]
Sampling procedures and tables for inspection by attributes
   
SS ISO 03040 1990   SS ISO 3040 : 1990 [Not Available]
Technical drawings - Dimensioning and tolerancing - Cones
01.100.20  
SS ISO 03098-01 1974   SS ISO 3098/1 : 1974 [Not Available]
Technical drawings - Lettering, currently used characters
01.100.01  
SS ISO 03166 1981   SS ISO 3166 : 1981 [withdrawn]
Codes for the representation of names of countries
   
SS ISO 03262 1975   SS ISO 3262 : 1975 [withdrawn => Refer directly to ISO 3262]
Extenders for paints
   
SS ISO 03355 1975   SS ISO 3355 : 1975 [withdrawn]
Shoe sizes - System of length grading (for use in the Mondopoint system)
   
SS ISO 03384 1991   SS ISO 3384 : 1991 [Not Available]
Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression at ambient and at elevated temperatures
83.06  
SS ISO 03497 1976   SS ISO 3497 : 1976 Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods 25.22  
SS ISO 03543 1981   SS ISO 3543 : 1981 [withdrawn]
Metallic and non-metallic coatings- Measurement of thickness - Beta backscatter method
   
SS ISO 03768 1976   SS ISO 3768 : 1976 Metallic coatings - Neutral salt spray test (NSS test) 25.220.40  
SS ISO 03769 1976   SS ISO 3769 : 1976 Metallic coatings - Acetic acid salt spray test (ASS test) 25.220.40  
SS ISO 03770 1976   SS ISO 3770 : 1976 Metallic coatings - Copper-accelerated acetic acid salt spray test (CASS test) 25.220.40  
SS ISO 03844 1977   SS ISO 3844 : 1977 [withdrawn]
Shoe sizes - Method of marking
   
SS ISO 03882 1986   SS ISO 3882 : 1986 Metallic and non-organic coatings - Review of methods of measurement of thickness    
SS ISO 04074-09 1980   SS ISO 4074 : Part 9 : 1980 [withdrawn]
Specification for rubber condoms - Determination of tensile properties
   
SS ISO 04074-10 1990   SS ISO 4074 : Part 10 : 1990 [withdrawn]
Specification for rubber condoms - Packaging and labelling - Condoms in consumer packages
   
SS ISO 04217 1981   SS ISO 4217 : 1981 [Not Available]
Codes for the representation of currencies and funds
01.140.30  
SS ISO 04416 1981   SS ISO 4416 : 1981 [withdrawn]
Size designation of clothes - Women's and girls' underwear, nightwear, foundation garment and shirts
   
SS ISO 04516 1980   SS ISO 4516 : 1980 Metallic and related coatings - Vickers and Knoop microhardness tests 25.220.40  
SS ISO 04536 1985   SS ISO 4536 : 1985 Metallic and non-organic coatings on metallic substrates - Saline droplets corrosion test (SD test) 25.22  
SS ISO 04538 1978   SS ISO 4538 : 1978 [withdrawn]
Metallic coatings - Thioacetamide corrosion test (TAA test)
   
SS ISO 04539 1980   SS ISO 4539 : 1980 [withdrawn]
Electrodeposited chromium coatings - Electrolytic corrosion test (EC test)
   
SS ISO 04540 1980   SS ISO 4540 : 1980 Metallic coatings - Coatings cathodic to the substrate - Rating of electroplated test specimens subjected to corrosion tests    
SS ISO 04541 1978   SS ISO 4541 : 1978 [withdrawn]
Metallic and other non-organic coatings - Corrodkote corrosion test (CORR test)
   
SS ISO 04542 1981   SS ISO 4542 : 1981 Metallic and other non-organic coatings - General rules for stationary outdoor exposure corrosion tests 25.22  
SS ISO 04543 1981   SS ISO 4543 : 1981 Metallic and other non-organic coatings - General rules for corrosion tests applicable for storage conditions 25.22  
SS ISO 06411 1982   SS ISO 6411 : 1982 [Not Available]
Technical drawings - Simplified representation of centre holes.
01.100.20  
SS ISO 06988 1985   SS ISO 6988 : 1985 [withdrawn]
Metallic and other non-organic coatings - Sulphur dioxide test with general condensation of moisture
   
SS ISO 07816-02 1988   SS ISO 7816-2 : 1988 Identification cards - Integrated circuit(s) cards with contacts - Dimensions and location of the contacts 35.240.15  
SS ISO 08401 1986   SS ISO 8401 : 1986 [withdrawn]
Metallic coatings - Review of methods of measurement of ductility
   
SS ISO 08630-01 1987   SS ISO 8630 : Part 1 : 1987 [withdrawn]
Information processing - Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 13 262 ftprad, on 80 tracks on each side - Dimensional, physical and magnetic characteristics
35.220.20 (refer directly to ISO 8630-1 : 1987)
SS ISO 08630-02 1987   SS ISO 8630 : Part 2 : 1987 [withdrawn]
Information processing - Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 13 262 ftprad, on 80 tracks on each side - Track format A for 77 tracks
35.220.20 (refer directly to ISO 8630-2 : 1987)
SS ISO 08630-03 1987   SS ISO 8630 : Part 3 : 1987 [withdrawn]
Information processing - Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 13 262 ftprad, on 80 tracks on each side - Track format B for 80 tracks
35.220.20 (refer directly to ISO 8630-3 : 1987)
SS ISO 08860-01 1987   SS ISO 8860 : Part 1 : 1987 [withdrawn]
Information processing - Data interchange on 90 mm (3.5 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad on 80 tracks on each side - Dimensional, physical and magnetic characteristics
35.220.20 (refer directly to ISO 8860-1 : 1987)
SS ISO 08860-02 1987   SS ISO 8860 : Part 2 : 1987 [withdrawn]
Information processing - Data interchange on 90 mm (3.5 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad on 80 tracks on each side - Track format
35.220.20 (refer direct to ISO 8860-2 : 1987)
SS ISO 09000 2000   SS ISO 9000 : 2000 Quality management systems - Fundamentals and vocabulary 01.040.03;
03.120.10
 
SS ISO 09000 Series 2000   SS ISO 9000:2000 Series [Not Available]
SS ISO 9000 Package
   
SS ISO 09000-01 1994   SS ISO 9000-1 : 1994 [withdrawn => SS ISO 9000 series:2000]
Quality management and quality assurance standards - Guidelines for selection and use
03.120.10  
SS ISO 09000-02 1997   SS ISO 9000-2 : 1997 [withdrawn => SS ISO 9000 series:2000]
Quality management and quality assurance standards - Generic guidelines for the application of ISO 9001, ISO 9002 and ISO 9003
03.120.10  
SS ISO 09000-03 1997   SS ISO 9000-3 : 1997 [withdrawn => SS ISO 9000 series:2000]
Quality management and quality assurance standards - Guidelines for the application of ISO 9001 : 1994 to the development, supply, installation and maintenance of computer software
03.120.10  
SS ISO 09001 1994   SS ISO 9001 : 1994 [withdrawn => SS ISO 9000 series:2000]
Quality systems - Specification for quality assurance in design, development, production, installation and servicing
03.120.10  
SS ISO 09001 2000   SS ISO 9001 : 2000 Quality management systems - Requirements 03.120.10  
SS ISO 09002 1994   SS ISO 9002 : 1994 [withdrawn => SS ISO 9000 series:2000]
Quality systems - Specification for quality assurance in production, installation and servicing
03.120.10  
SS ISO 09003 1994   SS ISO 9003 : 1994 [withdrawn => SS ISO 9000 series:2000]
Quality systems - Specification for quality assurance in final inspection and test
03.120.10  
SS ISO 09004 2000   SS ISO 9004 : 2000 Quality management systems - Guidelines for performance improvements 03.120.10  
SS ISO 09004-01 1994   SS ISO 9004-1 : 1994 [withdrawn => SS ISO 9000 series:2000]
Quality management and quality system elements - Guidelines
Erratum No. 1, October 1994
03.120.10  
SS ISO 09051 1990   SS ISO 9051 : 1990 [withdrawn => Refer directly to ISO 9051:2001]
Glass in building - Glazed assemblies containing fire-resistant transparent or translucent glass, for use in building
81.040.20  
SS ISO 09453 1990   SS ISO 9453 : 1990 Soft solder alloys - Chemical compositions and forms 25.160.50  
SS ISO 10564 1993   SS ISO 10564 : 1993 Soldering and brazing materials - Methods for the sampling of soft solders for analysis 25.160.50  
SS ISO 11530 1993   SS ISO 11530 : 1993 [Not Available]
Road vehicles - Hydraulic jacks
43.18  
SS ISO 14001 1996   SS ISO 14001 : 1996 [withdrawn]
Environmental management systems - Specification with guidance for use
13.020  
SS ISO 14001 2004   SS ISO 14001 : 2004 Environmental management systems - Requirements with guidance for use 13.020.10 Identical adoption of ISO 14001: 2004
SS ISO 14004 1996   SS ISO 14004 : 1996 [withdrawn]
Environmental management systems - General guidelines on principles, systems and supporting techniques
13.020  
SS ISO 14004 2004   SS ISO 14004 : 2004 Environmental management systems - General guidelines on principles, systems and supporting techniques 13.020.10 Identical adoption of ISO 14004 : 2004
SS ISO 14010 1996   SS ISO 14010 : 1996 [withdrawn => SS ISO 19011:2002]
Guidelines for environmental auditing - General principles
13.020  
SS ISO 14011 1996   SS ISO 14011 : 1996 [withdrawn => SS ISO 19011:2002]
Guidelines for environmental auditing - Audit procedures - Auditing of environmental management systems
13.020  
SS ISO 14012 1996   SS ISO 14012 : 1996 [withdrawn => SS ISO 19011:2002]
Guidelines for environmental auditing - Qualification criteria for environmental auditors
13.020  
SS ISO 19011 2002   SS ISO 19011 : 2002 Guidelines for quality and/or environmental management systems auditing 03.120.10;
13.020.10
 
Sort Mk 規格番号 Top規格名称(英語) 国際規格分類
( ICSコードの説明 )
国際整合
( IDT,MOD,NEQ等の説明 )
SS ISO/IEC 09529-01 1989   SS ISO/IEC 9529 : Part 1 : 1989 [withdrawn]
Information processing systems - Data interchange on 90 mm (3.5 in) flexible disk cartridges using modified frequency modulation recording at 15 916 ftprad, on 80 tracks on each side - Dimensional, physical and magnetic characteristics
35.220.20 (refer directly to ISO/IEC 9529-1 : 1989)
SS ISO/IEC 09529-02 1989   SS ISO/IEC 9529 : Part 2 : 1989 [withdrawn]
Information processing systems - Data interchange on 90 mm (3.5 in) flexible disk cartridges using modified frequency modulation recording at 15 916 ftprad, on 80 tracks on each side - Track format
35.220.20 (refer directly to ISO/IEC 9529-2 : 1989)
Sort Mk 規格番号 Top規格名称(英語) 国際規格分類
( ICSコードの説明 )
国際整合
( IDT,MOD,NEQ等の説明 )
TR 00001 1999   TR 1 : 1999 [withdrawn => SS 499]
Technical Reference - Cleaning service industry – Cleaning performance for commercial premises
   
TR 00002 2000   TR 2 : 2000 [withdrawn => CP 95]
Technical Reference - Cold chain management - Milk and dairy products
   
TR 00003 2001   TR 3 : 2001 Technical Reference - Performance of managing agents for private sector residential properties    
TR 00004 2001   TR 4 : 2001 [withdrawn => SS 505:2003]
Technical Reference - Exhibition management services (EMS) industry - Exhibition content
   
TR 00005 2001   TR 5 : 2001 Technical Reference - Exhibition management services (EMS) industry - Safety, health and technical operational efficiency    
TR 00006 2001   TR 6 : 2001 Technical Reference - Pipeline service corridors - Design, construction and operatio of pipeline service corridors in Singapore    
TR 00007-01 2002   TR 7 : Part 1 : 2002 Technical Reference - Quality system for medical device components - Requirements    
TR 00007-02 2002   TR 7 : Part 2 : 2002 Technical Reference - Quality system for medical device components - Guide to the application of requirements    
TR 00008 2003   TR 8 : 2003 Technical Reference for quality management for bunker supply chain (QMBS)    
TR 00009 2003   TR 9 : 2003 Technical Reference for maturity assessment for eSupply Chain Management (eSCM)    
TR 00010 2003   TR 10 : 2003 Technical Reference for compressed natural gas (CNG) vehicle workshop and personnel requirements    
TR 00011 2003   TR 11 : 2003 Technical Reference for compressed natural gas (CNG) vehicle component and installation    
TR 00012 2003   TR 12 : 2003 Technical Reference for compressed natural gas (CNG) vehicle refuelling stations    
TR 00013 2003   TR 13 : 2003 Technical reference for performance standard for embedding conduits in concrete    
TR 00014 2003   TR 14 : 2003 Technical reference for Singapore electronic bill presentment and payment (EBPP) shared infrastructure    
TR 00015-01 2003   TR 15 : Part 1 : 2003 Techical Reference for Thermal imagers for human temperature screening - Requirements and test methods    
TR 00015-02 2004   TR 15 : Part 2 : 2004 Technical Reference for Thermal Imagers for human temperature screening - Implementation guidelines    
TR 00016 2003   TR 16 : 2003 Technical Reference for cleaning performance for public housing estates    
TR 00017 2004   TR 17 : 2004 Technical Reference for fingerprint image qualifty metrics    
TR 00018 2005   TR 18 : 2005 Technical Reference for vector management services in housing estates managed by Town Councils: Scope of works and quality measuring system 03.120.10;
13.020
 
Sort Mk 規格番号 Top規格名称(英語) 国際規格分類
( ICSコードの説明 )
国際整合
( IDT,MOD,NEQ等の説明 )


Home FAQ SS規格の説明 Top 質問l ご意見、ご要望、ご質問 はお気軽に

©2004-2005 H.Ishiguro