標準関係略語説明:MIL トピックス

ＭＩＬ規格トピックス

　　・ＭＩＬ規格の説明から分離しました。

新URL(2011-09) 旧 DSCC から移行

検索(http://assistdocs.com/search/search_basic.cfm) 下記が利用できない場合はこちらをご利用下さい
一覧 (Mil Specs & Drawings)
検索 (Search Mil Specs & Drawings)

2012-04-30

MIL-STD-750(半導体試験法) 関連情報が無償公開されています。

　　関連情報 : 2012-02-05の情報 MIL-STD-750 (Rev F)

　　関連情報 : 2012-01-08の情報 Test Method 1051 (Temperature Cycling) (EPS 2012-01-06版)

MIL-STD-750(半導体試験法) Test Method Test Method 1051 (Temperature Cycling) (EPS 2012-01-06版) が無償公開されています。

http://www.landandmaritime.dla.mil/Downloads/MilSpec/Docs/5961EPStudies/epstudySMDPullTest.pdf
EP Study for MIL-STD-750
Bond Integrity Requirements for Surface Mount End Caps
　Dated: 27 April 2012 File name: epstudySMDPullTest.pdf, File Size: 143 kb

　　I. OBJECTIVES:: An engineering practice study is being conducted to establish a new MIL-STD-750 test method specific to the evaluation of bond integrity for surface mount device (SMD) end caps, specifically for the URS and US packages. ・・・

http://www.landandmaritime.dla.mil/Downloads/MilSpec/Docs/5961EPStudies/EPSstd750tm2026.pdf
EP study MIL-STD-750 Test Method 2026
MIL-STD-750 Test Method 2026
　Dated: 09 March 2012 File name: EPSstd750tm2026.pdf, File Size: 1169 kb

　　I. OBJECTIVES:: 　An engineering practice study is being conducted to review and evaluate the requirements of MIL-STD-750, Test Method 2026 (Solderability) to determine if an allowance for the use of ROM1 type flux should be permitted for gold leaded Leadless Chip Carrier (LCC) packages

http://www.landandmaritime.dla.mil/Downloads/MilSpec/Docs/750_Work_Draft/idstd750-2.zip
MIL-STD-750-2 (Part 2) w/Change 1 (Initial Draft)
Test Method Standard, Mechanical Test Methods for Semiconductor Devices, Part 2: Test Methods 2001 through 2999
　Dated: 24 April 2012 File name: idstd750-2.zip, File Size: 6,5305 kb

http://www.landandmaritime.dla.mil/Programs/MilSpec/ListDocs.aspx?BasicDoc=5961EPStudies
Test Method Standard Test Methods for Semiconductor Devices
FSC: 5961: Semiconductor Devices 関係 EPStudy はここにあります。

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.aspx?BasicDoc=750_Work_Draft
working drafts for the next revision of MIL-STD-750.
MIL-STD-750 Work Draft関係はここにあります。

http://www.landandmaritime.dla.mil/Programs/MilSpec/ListDocs.aspx?BasicDoc=MIL-STD-750 新URL
Test Method Standard Test Methods for Semiconductor Devices
現在有効な MIL-STD-750 Revision: F 03 January 2012版分割ファイル 等、 正式版、関連資料はここにあります。

2012-04-22

MIL-STD-1678(旧:DOD-STD-1678)(光ファイバシステム要求と測定法 Part 5 w/Change 1案 (2012-04-19版) が無償公開されています。

　前回情報 : 2012-03-18の情報(Part 6案)

http://www.landandmaritime.dla.mil/Downloads/MilSpec/Docs/MIL-STD-1678/idstd1678p5ch1.pdf
MIL-STD-1678-5 w/Change 1 (Initial Draft)
Fiber Optic Cabling Systems Requirements and Measurements
　　(Part 5: Design Phase and Legacy Measurements)
　　Dated: 19 April 2012 File name: idstd1678p5ch1.pdf, File Size: 713 kb 全91頁

http://www.landandmaritime.dla.mil/Programs/MilSpec/ListDocs.aspx?BasicDoc=MIL-STD-1678
Fiber Optics Test Methods and Instrumentation FSC 9999
　・1678関連情報は、ここにまとまってあります。

2012-04-08

MIL-HDBK-103(集積回路リスト) 改正版 Rev.AK(2012-03-19) が無償公開されています。

前回情報 2012-04-01 の情報に対する 追加情報 です。

MIL-HDBK-103 MB>APPENDIX, Part I only (PDF)
Listed by SMD part number. Dated: 19 March 2012 File name: hb103p1.pdf, File Size: 1880 kb 695頁

MIL-HDBK-103 APPENDIX, Part II only (PDF)
Listed by generic part number. Dated: 19 March 2012 File name: hb103p2.pdf, File Size: 1049 kb 216頁

MIL-HDBK-103 APPENDIX, Part III only (PDF)
Listed approved sources. Dated: 19 March 2012 File name: hb103p3.pdf, File Size: 24 kb 全5頁

http://www.landandmaritime.dla.mil/Programs/MilSpec/ListDocs.aspx?BasicDoc=MIL-HDBK-103【新URL】
　　　　　注 : URL中の ListDocs.aspx? に注意
上記ファイルを含め、関連情報はここにまとめられています。
　　注 : :2012-04-01現在、上記URL内ファイル説明で Revision: AJ と記載されていても
　　　　　発行が 2012-03となっていれば本体ファイルは最新の Revision: AK です。

2012-04-01

MIL-HDBK-103(集積回路リスト) 改正版 Rev.AK(2012-03-19) が無償公開されています。

前回情報は 2011-09-25 Rev. AJ の情報です。
　　注: Rev. はピン番号などと同様通常「I」、「O」等数字と混同しやすい英字は使用せず欠番

MIL-HDBK-103
List of Standard Microcircuit Drawings
Revision: AK Dated: 19 March 2012
File Name: hdbk103.pdf, File Size: 3063 kB 全931頁

MIL-HDBK-103 (PDF/ZIP)
Listed by SMD part number. Dated: 29 March 2012 File name: hdbk103pdf.zip, File Size: 2622 kB

MIL-HDBK-103, Part I only (PDF)
Listed by SMD part number. Dated: 19 September 2011 File name: hb103p1.pdf, File Size: 3806 kB

MIL-HDBK-103, Part II only (PDF)
Listed by generic part number. Dated: 19 September 2011 File name: hb103p2.pdf, File Size: 1566 kB

MIL-HDBK-103, Part III only (PDF)
Listed approved sources. Dated: 19 September 2011 File name: hb103p3.pdf, File Size: 19 kb

MIL-HDBK-103 (TXT)
ASCII text format, includes 6-section text, zipped.
Dated: 29 March 2012 File name: hdbk103txt.zip, File Size: 373 kb

MIL-HDBK-103 (MDB)
MS Access format, zipped.
Dated: 29 March 2012 File name: hdkb103mdb.zip, File Size: 676 kb

2012-03-18

MIL-STD-1678(旧:DOD-STD-1678)(光ファイバシステム要求と測定法 Part 6 案(2012-03-16版) が無償公開されています。

　前回情報 : 2011-10-02の情報(part 1, 2 関連)

http://www.landandmaritime.dla.mil/Downloads/MilSpec/Docs/MIL-STD-1678/idstd1678p6.pdf New URL
MIL-STD-1678-6 (Initial Draft)
Fiber Optic Cablingsystems Requirements and Measurements
　Part 6: PARTS AND SUPPORT EQUIPMENT COMMONALITY AND STANDARDIZATION REQUIREMENTS,CABLE HARNESS CONFIGURATIONS)
　Dated: 15 March 2012 File name: idstd1678p6.pdf, File Size: 1235 kb 全124頁

http://www.landandmaritime.dla.mil/Programs/MilSpec/ListDocs.aspx?BasicDoc=MIL-STD-1678 New URL
Fiber Optics Test Methods and Instrumentation FSC 9999
　・1678関連情報は、ここにまとまってあります。

MIL-STD-681(配線識別) 改正版 Rev.F 正式版(2012-03-07) が無償公開されています。
　前回情報 : 2010-10-17の情報(REV.E)

MIL-STD-681 Identification Coding and Application of Hookup and Lead Wire
Revision: F, Dated: 07 March 2012
File Name: std681.pdf, File Size: 147 kb 全17頁

　1. SCOPE

　　1.1 Scope.

This standard establishes identification coding systems for all insulated hookup and lead wire used in electrical and electronic equipment by the Departments of the Army, Navy, and Air Force.

These coding systems should also be used for identifying lead wires on Hall generators and ac and dc wire coding methods specified (see 4.9 and 4.10).

　　1.2 Classification.

Identification of hookup wiring and lead wire shoud be limited to the following systems:

System I - Differentiation color coding for chassis wiring.
System II - Functional color coding of chassis wiring
System III - Differentiation or functional coding of chassis wiring by printed markings
System IV - Coding of interconnecting wiring.
System V - Direct wiring and open wiring
System VI - Differential color coding of hookup wire for chassis and interconnection wiring

　3. DEFINITIONS

　　3.1 Definitions.

For the purpose of this standard, the following definitions apply:

3.1.1 Hookup wire
3.1.2 Lead wire.
3.1.3 Chassis wiring.
3.1.4 Interconnecting wiring.
3.1.5 Harness.
3.1.6 Homogenous cable.
3.1.7 Jacketed cable.

　　TABLE I. Preferred color sequence for single wires..

0:Black 1:Brown 2:Red 3:Orange 4:Yellow 5:Green 6:Blue 7:Violet 8:Gray 9:White

皆さん 固定抵抗器等のカラーコード としておなじみのはず

http://www.landandmaritime.dla.mil/Programs/MilSpec/ListDocs.aspx?BasicDoc=MIL-STD-681 New URL
上記ファイルそのものの他、関連情報はここにまとめられています。

2012-02-19

MIL-STD-1130 (Rev.C) Connections, Electrical, Solderless Wrapped (圧着) が無償ダウンロード可能となっています。

前回情報 : 2010-12-19 の情報(案)

http://www.landandmaritime.dla.mil/Programs/MilSpec/ListDocs.aspx?BasicDoc=MIL-STD-1130 下記を含め全体の情報があります。: http://www.landandmaritime.dla.mil/Downloads/MilSpec/Docs/MIL-STD-1130/std1130.pdf
MIL-STD-1130 Connections, Electrical, Solderless Wrapped
Revision: C, Dated: 31 January 2012 File Name: std1130.pdf, File Size: 240 kb 全21頁
　　1.1 Scope.: This standard establishes the requirements to produce mechanically and electrically stable, solderless wrapped, electrical connections made with single, solid, round wire and appropriately designed wrapposts (terminals). This standard includes:; a. Classes and requirements for solderless wrapped connections.; b. Description and requirements for the wire used in making the solderless wrapped connections.; c. Description and requirements for the wrappost used in making the solderless wrapped connections.
　　1.2 Classification.: This standard covers the following classes of solderless wrapped, electrical connections:; Class A - Solderless wrapped, electrical connections (see 3.2 for preferred method).; Class B - Conventional solderless wrapped, electrical connections (see 3.3). Class A will be used whenever possible.

2012-02-05

　【発行情報】http://assistdocs.com/search/search_basic.cfm で検索、原本閲覧、保存可

　　【検索例】

Document ID : 「MIL-STD」

Document Number: 「750」

Document Status : 「ALL」

Document: MIL-STD-750 (Rev F) -- Dated 1/3/2012: Description: Test Method Standard Test Methods for Semiconductor Devices
Document: MIL-STD-750-1 -- Dated 1/3/2012: Description: Environmental Test Methods for Semiconductor Devices Part 1: Test Methods 1000 through 1999
Document: MIL-STD-750-2 -- Dated 1/3/2012: Description: Mechanical Test Methods for Semiconductor Devices Part 2: Test Methods 2001 through 2999
Document: MIL-STD-750-3 -- Dated 1/3/2012: Description: Transistor Electrical Test Methods for Semiconductor Devices Part 3: Test Methods 3000 through 3999
Document: MIL-STD-750-4 -- Dated 1/3/2012: Description: Diode Electrical Test Methods for Semiconductor Devices Part 4: Test Methods 4000 through 4999
Document: MIL-STD-750-5 -- Dated 1/3/2012: Description: High Reliability Space Application Test Methods for Semiconductor Devices Part 5: Test Methods 5000 through 5999
Document: MIL-HDBK-780 (Rev D) -- Dated 1/6/2012: Description: Department of Defense Handbook, Standard Microcircuit Drawings (w/Change 1)

2012-01-08

MIL-STD-750(半導体試験法) Test Method Test Method 1051 (Temperature Cycling) (EPS 2012-01-06版) が無償公開されています。

　　関連情報 : 2011-10-02の情報

http://www.landandmaritime.dla.mil/Downloads/MilSpec/Docs/5961EPStudies/epstudy750tm1051.pdf
EP Study Test Method 1051 (Final Report)
Review of Requirements for MIL-STD-750 Test Method 1051
Dated: 06 January 2012 File name: epstudy750tm1051.pdf, File Size: 58 kb

　　I. OBJECTIVES:: 　An engineering practice study is being conducted to review and evaluate the requirements of MIL-STD-750, Test Method 1051 (Temperature Cycling) to determine ramp rate(s) which protect DUT(s) from an induced thermal shock. This exercise will also aid the user in determining if performing equipment is acceptable for compliance to a surveillance audit. If consensus indicates that the current requirements are ineffective and/or unachievable, then recommend revising said requirements

http://www.landandmaritime.dla.mil/Programs/MilSpec/ListDocs.aspx?BasicDoc=MIL-STD-750 新URL
Test Method Standard Test Methods for Semiconductor Devices
現在有効な MIL-STD-750 Revision: E 9854 kb, Dated: 20 November 2006 等、関連資料はここにあります。

2011-12-25

ベア・プリント板試験法 EPS 結論が無償公開されています。

http://www.landandmaritime.dla.mil/Downloads/MilSpec/Docs/5998EPStudies/EPS_5998-2011-028.pdf
Final Report : Engineering Practices Study: Review for adoption of IPC-TM-650 number 2.3.25.1 "Ionic Cleanliness Testing of Bare PWBs"
Dated: 16 November 2011 File name: EPS_5998-2011-028.pdf, File Size: 32 kb

　　ATTACHMENT 1 to EPS 5998-2011-028
　　　ADOPTION NOTICE: IPC-TM-650 number 2.3.25.1, "Ionic Cleanliness Testing of Bare PWBs", was adopted on DAY MONTH YEAR for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Defense Logistics Agency, DLA Land and Maritime, ATTN: VAC, P.O. Box 3990, Columbus OH 43218-3990 or 5998.Documents@dla.mil. Copies of this standard may be purchased or downloaded from the IPC - Association Connecting Electronics Industries (IPC), 3000 Lakeside Drive, Suite 309 S, Bannockburn, IL 60015-1249 or at URL: http://www.ipc.org.

http://www.landandmaritime.dla.mil/Programs/MilSpec/ListDocs.aspx?BasicDoc=5998EPStudies
関連資料はここにあります。

2011-12-04

表示灯 改正案が無償公開されています。

http://www.landandmaritime.dla.mil/Downloads/MilSpec/Docs/DSCC_Drawings/id85122.pdf
Document: 85122E (Initial Draft) -- Dated 11/28/2011 File size: 514 kb
Description: Indicator Assemblies: Red, Yellow, Green; Plain and Filtered Lenses; Panel-Sealed, and Panel and Rear Sealed

　　1.1 Scope.: 　This drawing describes the requirements for panel-sealed, and panel and rear sealed indicator assemblies with plain or filtered type lens designed for sunlight viewing.; 　The indicator assemblies are available with anti-reflection coated lens and electrostatic screen

http://www.landandmaritime.dla.mil/Downloads/MilSpec/Docs/DSCC_Drawings/id87019.pdf
Document: 87019F (Initial Draft) -- Dated 11/28/2011 File size: 443 kb

　　1.1 Scope.: 　This drawing describes the requirements for IR secure indicator assemblies with panel sealing and panel and rear sealing with filtered type lens designed for sunlight viewing.; 　The indicator assemblies also have an antireflection coated lens and are available with an optional electrostatic screen.

http://www.landandmaritime.dla.mil/Programs/MilSpec/initialdrafts.aspx
関連資料はここにあります。

2011-10-02

MIL-STD-750(半導体試験法) Test Method Test Method 1051 (Temperature Cycling) EPS 2011-09-26版) が無償公開されています。

　　関連情報 : 2011-06-26の情報

http://www.landandmaritime.dla.mil/Downloads/MilSpec/Docs/MIL-STD-750/std750_EPStudy.pdf
MIL-STD-750 EP Study
This EPS is intended to review and evaluate the requirements of MIL-STD-750, Test Method 1051 (Temperature Cycling) to determine ramp rate(s) which protect DUT(s) from an induced thermal shock. The results of this study will form the basis for the next revision
. Dated: 26 September 2011 File name: std750_EPStudy.pdf, File size: 191 kb

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-STD-750
Test Method Standard Test Methods for Semiconductor Devices
現在有効な MIL-STD-750 Revision: E, Dated: 20 November 2006 等、関連資料はここにあります。

MIL-STD-1678(旧:DOD-STD-1678)(光ファイバシステム要求と測定法 Part 1, Part 2 w/Change 1(2011-09-21正式版) が無償公開されています。

　前回情報 : 2011-06-26の情報

http://www.landandmaritime.dla.mil/Downloads/MilSpec/Docs/MIL-STD-1678/std1678p1.pdf
MIL-STD-1678-1 w/Change 1
Fiber Optic Cabling Systems Requirements and Measurements (Part 1: Design, Installation and Maintenance Requirements)
Dated: 21 September 2011 File name: std1678p1.pdf, File size: 472 kb 全77頁

http://www.landandmaritime.dla.mil/Downloads/MilSpec/Docs/MIL-STD-1678/std1678p2.pdf
MIL-STD-1678-2 w/Change 1
Fiber Optic Cabling Systems Requirements and Measurements (Part 2: Optical Measurements)
Dated: 21 September 2011 File name: std1678p2.pdf, File size: 926 kb 全116頁

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-STD-1678
Fiber Optics Test 1678Methods and Instrumentation FSC 9999
　・1678関連情報は、ここにまとまってあります。

2011-09-25

MIL-HDBK-103(集積回路リスト) 改正版 Rev.AJ(2011-09-19) が無償公開されています。

前回情報は 2011-04-17(半年前) Rev. AH の情報です。
　　注: ピン番号などと同様通常「I」、「O」等数字と混同しやすい英字は使用せず欠番

MIL-HDBK-103
List of Standard Microcircuit Drawings
Revision: AJ, Dated: 19 September 2011 File name: hb103.pdf, File size: 5228 kb 全923頁

MIL-HDBK-103 (PDF/ZIP)
Listed by SMD part number. Dated: 19 September 2011 File name: hb103pdf.zip, File size: 5029 kb

MIL-HDBK-103, Part I only (PDF)
Listed by SMD part number. Dated: 19 September 2011 File name: hb103p1.pdf, File size: 3806 kb

MIL-HDBK-103, Part II only (PDF)
Listed by generic part number. Dated: 19 September 2011 File name: hb103p2.pdf, File size: 1566 kb

MIL-HDBK-103, Part III only (PDF)
Listed approved sources. Dated: 19 September 2011 File name: hb103p3.pdf, File size: 19 kb

MIL-HDBK-103 (TXT)
ASCII text format, includes 6-section text, zipped.
Dated: 19 September 2011 File name: hb103txt.zip, File size: 383 kb

MIL-HDBK-103 (MDB)
MS Access format, zipped. Dated: 19 September 2011 File name: hb103mdb.zip, File size: 671 kb

http://www.landandmaritime.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-HDBK-103【新URL】
上記ファイルを含め、関連情報はここにまとめられています。

レーザマーキング(刻印) に関する EPS(Engineering Practice Study) です

MIL-PRF-19500 1127 EP Study
Engineering Practice Study to Establish Laser Marking Requirements for MIL-PRF-19500
Dated: 16 September 2011 File name: EPS 1127laser marking.pdf, File size: 111 kb

http://www.landandmaritime.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=19500EPStudies【新URL】
上記ファイルを含め、関連情報はここにまとめられています。

2011-09-18

MIL-STD-790 (QPL) の 改定正式版 Rev.G が無償公開されています。

Device Type	Family	Applicable Military Specification
Transformer, power	03	MIL-PRF-27
Inductor, power	04	MIL-PRF-27
Transformer, R.F. fixed	11	MIL-T-55631
Transformer, R.F. variable	12	MIL-T-55631
Coil, R.F., fixed	13	MIL-PRF-15305
Coil, R.F., variable	14	MIL-PRF-15305
Inductor, audio	20	MIL-PRF-27
Transformer, audio	21	MIL-PRF-27
Transformer, pulse, low, power	31	MIL-PRF-21038
Transformer, pulse, high, power	36	MIL-PRF-27
Inductor, charging	37	MIL-PRF-27
Transformer, saturable	40	MIL-PRF-27
Inductor, saturable	41	MIL-PRF-27
Coil, R.F., chip, fixed	50	MIL-PRF-83446
Coil, R.F., chip, variable	51	MIL-PRF-83446
Coil, R.F., fixed	52	MIL-PRF-39010

　関連情報 : 2009-03-22の情報

This standard gives the general physical, electrical, and chemical methods for testing fiber optics cables for conformance with the requirements.

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-1678/idstd1678p1.pdf
MIL-STD-1678 Part 1 (Initial Draft)
Fiber Optic Cabling Systems Requirements and Measurements
　 (Part 1: Design, Installation and Maintenance Requirements)
　　Dated: 23 July 2009　File name: idstd1678p1.pdf, File size: 463 kb 全73頁

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-1678/idstd1678p3.pdf
MIL-STD-1678 Part 3 (Initial Draft)
Fiber Optic Cabling Systems Requirements and Measurements
　 (Part 3: Physical, Mechanical, Environmental and Material Measurements)
　　Dated: 23 July 2009 File name: idstd1678p3.pdf, File size: 799 kb 全154頁

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-1678/idstd1678p4.pdf
MIL-STD-1678 Part 4 (Initial Draft)
Fiber Optic Cabling Systems Requirements and Measurements
　 (Part 4: Test Sample Configuration and Fabrication Requirements)
　　Dated: 23 July 2009 File name: idstd1678p4.pdf, File size: 212 kb 全35頁

2009-05-24

MIL-STD-1698B(丸形コネクタ電極ピン配列) (改正正式版) が無償公開されています。

　前回情報 : 2008-10-26の情報(Rev.A)

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-STD-1698
Insert Arrangements for High Shock Circular Electrical Connectors : FSC 5935
　・1698関連情報は、ここにまとまってあります。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-1698/std1698.pdf
Insert Arrangements for MIL-DTL-28840 High Density High Shock Circular Electrical Connectors
Revision: B, Dated: 30 April 2009 File name: std1698.pdf, File size: 420 kb 全28頁

2009-05-17

MIL-STD-220C(RFフィルタ類挿入損失測定) 改正版 Rev.C(2009-05-14) が無償公開されています。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-220/std220.pdf
MIL-STD-220
Test Method Standard, Method of Insertion Loss Measurement Revision: C
Dated: 14 May 2009 File name: std220.pdf, File size: 1041 kb 全19頁

　　1.1 Scope.: 1.1 Scope . This standard covers a method of measuring, in a 50 ohm system, the insertion lossfeed-through suppression capacitors, and of single and multiple circuit radio frequency (RF) filters at frequencies up to 10 gigahertz (GHz).

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-STD-220
上記ファイルそのものも含め、関連情報はここにまとめられています。

2009-04-26

MIL-STD-981C(宇宙用電磁デバイス) 改正版案(2009-04-16) が無償公開されています。

MIL-STD-981C (Initial Draft)
Design, Manufacturing and Quality Standards for Custom Electromagnetic Devices for Space Applications
Dated: 16 April 2009 File name: idstd981.pdf, File size: 1439 kb 全87頁

　　1.1 Scope.: This standard establishes the requirements for acceptable design, manufacturing, and quality control criteria for open and closed construction leaded and surface mount magnetic devices for custom electromagnetic devices for space applications.

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-STD-981
上記ファイルそのものの他、現在有効な正式版(Rev.B 1992) も含め、関連情報はここにまとめられています。

2009-04-12

MIL-HDBK-103(集積回路リスト) 改正版 Rev.AD(2009-03-26) が無償公開されています。

This handbook provides a list of microcircuits covered by Standard Microcircuit Drawings (SMD's), and their approved sources.

前回情報は 2008-10-13(半年前) Rev. AC の情報です。

MIL-HDBK-103 (PDF) (実際は .ZIPファイル)
Listed by SMD part number.
Dated: 26 March 2009 File name: hb103pdf.zip, File size: 5327 kb

　.ZIPファイル を解凍すると

Hb103AD.pdf(2.83MB 本体 + Part I～III 全891頁)

Part I.pdf(Part 1 のみ 1.71MB 全667頁)

Part II.pdf(Part 2 のみ 1.06MB 全203頁)

Part III.pdf(Part 3 のみ 26kB 全6頁)

　　が得られます。

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-HDBK-103
上記ファイルそのものの他、2009-04-12現在【旧版】(PDF Rev.AC)、 .TXT版(.ZIP)、.MDB(.ZIP) も含め、関連情報はここにまとめられています。

2009-03-22

５０Ω系高周波フィルタ類 の 挿入損失測定法(改正案) MIL-STD-220C (Initial Draft) (2009-03-17版)
が無償公開されています。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-220/idstd220.pdf
MIL-STD-220C (Initial Draft)
Test Method Standard, Method of Insertion Loss Measurement
Dated: 17 March 2009 File name: idstd220.pdf, File size: 358 kb 全20頁

　　1. SCOPE
　　　1.1 Scope.: This standard covers a method of measuring, in a 50 ohm system, the insertion loss of feed-through suppression capacitors, and of single and multiple circuit radio frequency (RF) filters at frequencies up to 10 gigahertz (GHz).

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-STD-220
現在有効な Revision: B、上記ファイル(改正案) そのものを含め、 関連情報はここにまとめられています。

光ファイバシステム測定法(改正案) に対する コメント集 が無償公開されています。

　　Comments on Initial Drafts of MIL-STD-1678-2 and MIL-STD-1678-5

2009-03-15

半導体分野 の Criteria and Provisions for Qualified Suppliers List of Distributors (QSLD)
FSCs 5961 (Semiconductors)/5962 (Microcircuits) 解説小冊子 (2009-02-02版)
が無償公開されています。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/QSLD/QSL_Booklet.pdf
Criteria and Provisions for Qualified Suppliers List of Distributors (QSLD)
Revision: -, Dated: 2 February 2009
File name: QSL_Booklet.pdf, File size: 125 kb 全11頁

　　1.0 INTRODUCTION

Qualification for placement on the Qualified Suppliers List for Distributors (QSLD), and the maintenance of QSLD status, requires the distributor to demonstrate that it has in place, and uses on a routine basis, a Quality Management System (QMS) that meets the criteria set forth in JESD31.

The objective of the QSLD Program is to ensure that the distributor routinely controls his processes to provide consistent delivery of products that conform to the contract and specification requirements.

Four key elements are required of distributors who wish to be listed on the QSLD.
These are:

a. Evidence of using a documented Quality Management System which meets DSCC's criteria.
b. QPL/QML products having been produced by a Manufacturer who is listed (or was at date of manufacture) on the QPL or QML, and commercial products produced by the original manufacturer, may be purchased under this program If the products were procured from another distributor, that distributor must be listed on the QSLD. Consequently, all products pursuant to DSCC's contract must be obtained from, or flow through QSLD providers. This closed loop flow must be supported by the provider's traceability documentation. No deviations are permitted under this QSLD program.
c. Evidence that product is not commingled; lot identity is maintained.
d. The quality of the product is not altered by Distributors.

　　2.0 SCOPE

The products that DSCC procures which are included in this program are certain safety critical and high reliability items which fall into the Federal Supply Classes of 5961 (semiconductors) and 5962 (monolithic and hybrid microcircuits).

See http://www.dscc.dla.mil/Programs/MilSpec/DocSearch.asp to obtain specifications and standards.

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=QSLD
上記ファイルそのものを含め、 関連情報はここにまとめられています。

2009-02-22

MIL-STD-1554A(円形コネクタ・ピン配置) Rev.A　(正式版 2009-02-02版) が無償公開されています。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-1554/std1554.pdf
MIL-STD-1554
Insert Arrangements for MIL-DTL-83723 Series III and MIL-DTL-26500 Environment Resisting, Circular, Electrical Connectors
Revision: A, Dated: 2 February 2009 File name: std1554.pdf, File size: 719 kb 全59頁

コネクタ

　　1.1 Scope.
　　　1.1 Purpose.: The purpose of this standard is to standardize on Radio Frequency connector interfaces and to ensure the inclusion of essential design requirements.
　　　1.2 Scope.: This standard covers insert arrangements for use with MIL-DTL-83723 series III and MIL-DTL-26500 environment resisting, circular, electrical connectors.

2009-02-09

MIL-STD-348B(高周波コネクタ・インタフェース) Rev.B　(改正案 2009-02-09版) が無償公開されています。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-348/idstd348.pdf
MIL-STD-348B (Initial Draft)
Radio Frequency Connector, Interfaces for
Dated: 9 February 2009 File name: idstd348.pdf, File size: 3249 kb 全219頁

コネクタ

　　1.1 Scope.
　　　1.1 Purpose.: The purpose of this standard is to standardize on Radio Frequency connector interfaces and to ensure the inclusion of essential design requirements.
　　　1.2 Scope.: This standard specifies the dimensional requirements for radio frequency connector interfaces referenced in MIL-DTL-3643, MIL-DTL-3650, MIL-STD-3655, MIL-DTL-25516, MIL-PRF-39012, MIL-PRF-49142, MIL-PRF-55339 and MIL-DTL-83517. The purpose of this standard is to standardize radio frequency connector interfaces and to ensure the inclusion of essential design requirements.

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-STD-348
現在有効な MIL-STD-348 Rev.A : 1988、上記ファイルそのもの、その他関連情報はここにまとめられています。

2008-12-28

MIL-HDBK-1861(アセンブリ、プリント配線板、カード、関連部品セレクションガイド) 改正版 Rev.A　w/ Change 2 (2008-12-24版)(正式版) が無償公開されています。
　　　・(案)段階 : 2008-08-12 の情報

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-HDBK-1861/hb861.pdf
MIL-HDBK-1861A w/Change 2 (Initial Draft)
Selection and Use of Electrical and Electronic Assemblies, Boards, Cards, and Associated Hardware (w/Change 2) Revision: A, Dated: 24 December 2008 File name: hb861.pdf, File size: 242 kb 全35頁

　　1.1 Scope.

1.1 Scope. This handbook is for guidance only and cannot be cited as a requirement. If it is, the contractor not have to comply. This handbook consists of the following:

a. Selected standard items, for use in the design and manufacturer of Department of Defense equipment under the jurisdiction of the Department of Defense.

b. Guides for the choice and application of items for use in Department of Defense equipment.

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-HDBK-1861
上記ファイルそのものの他、関連情報はここにまとめられています。

2008-11-09

MIL-HDBK-199(抵抗器(セレクションガイド)) 改正版 Rev.B(2008-10-24)(正式版) が無償公開されています。

前回情報 : 案 : 2008-07-27の情報

　　1.1 Scope.

This handbook is for guidance only. This handbook cannot be cited as a requirement. If it is, the contractor does not have to comply.

This handbook consists of the following:

a. Selected standard resistor types, for use in the design and manufacturer of Department of Defense equipment under the jurisdiction of the Department of Defense.
b. Guides for the choice and application of resistors for use in Department of Defense equipment.

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-HDBK-199/idhdbk199.pdf
MIL-HDBK-199B Resistors, Selection and Use of
Revision: A (注: :本当は B ), Dated: 24 October 2008 File name: hdbk199.pdf, File size: 2720 kb 全50頁

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-HDBK-199
上記ファイルそのものの他、関連情報はここにまとめられています。

　　注 : 2008-11-09現在 PDF の説明が: Revision: A, Dated: 24 October 2008; 　　となっていますが中身は; Revision: B, Dated: 24 October 2008
　　です。

2008-11-03

MIL-HDBK-1131B (アルミ電解固定コンデンサの保存に関する HandBook のRev.B 改正正式版 が無償公開されています。

　前回情報 : 2008-09-15の情報

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-HDBK-1131/hb1131.pdf
Storage Shelf Life and Reforming Procedures for Aluminum Electrolytic Fixed Capacitors
Revision: B, Dated: 29 October 2008 File name: hb1131.pdf, File size: 91 kb 全10頁

　　1.1 Scope.: This handbook provides guidance in determining and prolonging the serviceability of aluminum electrolytic fixed capacitors during storage. This handbook is for guidance only. This handbook cannot be cited as a requirement. If it is, the contractor does not have to comply.

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-HDBK-1131
関連情報はここにまとめられています。

MIL-STD-1678(光ファイバケーブル試験法) Part 2, Part 5 改正案
　　が無償公開されています。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-1678/idstd1678p2.pdf
Fiber Optic Cabling Systems Requirements and Measurements (Part 2: Optical Measurements)
Dated: 30 October 2008 File name: idstd1678p2.pdf, File size: 488 kb 全117頁

　　1.1 Scope.: Part 2 of this standard practice provides further details to refine or bound (constrict) the performance of each optical test measurement addressed.

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-1678/idstd1678p5.pdf
Fiber Optic Cabling Systems Requirements and Measurements (Part 5: Design Phase and Legacy Measurements)
Dated: 30 October 2008 File name: idstd1678p5.pdf, File size: 312 kb 全72頁

　　1.1 Scope.: Part 5 of this standard practice provides further details to refine or bound (constrict) the performance of each legacy measurement addressed.

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-STD-1678
現在有効な正式版(1977-11) 、改正通知(1984-12) を含め、関連情報はここにまとめられています。

2008-10-26

MIL-STD-1698A(丸形コネクタ電極ピン配列) (改正正式版) が無償公開されています。

　前回情報 : 2007-05-20の情報(改正案)

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-1698/std1698.pdf
Insert Arrangements for MIL-DTL-28840 High Density High Shock Circular Electrical Connectors
Revision: A, Dated: 19 September 2008 File name: std1698.pdf, File size: 678 kb 全28頁

2008-10-13

MIL-HDBK-103(集積回路リスト) 改正版 Rev.AC(2008-09-25) が無償公開されています。

This handbook provides a list of microcircuits covered by Standard Microcircuit Drawings (SMD's), and their approved sources.

前回情報は 2008-04-13 Rev. AB の情報です。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-HDBK-103/hb103.pdf
List of Standard Microcircuit Drawings
Revision: AC, Dated: 25 September 2008 File name: hb103.pdf, File size: 2836 kb 全878頁

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-HDBK-103
上記ファイルそのものの他、分割ファイル、 .TXT版、.MDB も含め、関連情報はここにまとめられています。

2008-09-15

MIL-HDBK-1131B (アルミ電解固定コンデンサの保存に関する HandBook の改正案(Draft) が無償公開されています。

　昔、自作アマ無線ＴＲＸ(管球式送信管は802だったか)で、旧くなったアルミ電解コンデンサを爆発させたことがあります。安全弁が飛んだのですが、こちらが飛び上がりそうになりました。特に、長期間通電しなかったアルミ電解コンデンサは、規定電圧以下でも爆発しやすいのでご注意を！

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-HDBK-1131/idhdbk1131.pdf
Storage Shelf Life and Reforming Procedures for Aluminum Electrolytic Fixed Capacitors
Dated: 10 September 2008 File name: idhdbk1131.pdf, File size: 86 kb 全11頁

　　1.1 Scope.: This handbook provides guidance in determining and prolonging the serviceability of aluminum electrolytic fixed capacitors during storage.; This handbook is for guidance only.; This handbook cannot be cited as a requirement. If it is, the contractor does not have to comply.
　　1.2 Purpose.: The purpose of this document is to furnish guidance for the inspection, storage, reformation and issue of aluminum electrolytic fixed capacitors, Federal Supply Class (FSC) 5910.

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-HDBK-1131
上記ファイルの他、現在正式版である Revision: A等、関連情報はここにまとめられています。

2008-09-07

MIL-STD-883G (Test Method Standard, Microcircuits　集積回路試験方法) の改正(Rev. H)(案)が無償公開されています。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-883/idstd883ChangeSumm.pdf
MIL-STD-883H Change Summary (Initial Draft)
Change Summary Sheets for Revision H of MIL-STD-883
Dated: 4 September 2008 File name: idstd883ChangeSumm.pdf, File size: 123 kb 全10頁

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-883/idstd883.pdf
MIL-STD-883H (Initial Draft) Test Method Standard, Microcircuits
Dated: 4 September 2008 File name: idstd883.pdf, File size: 6893 kb 全754頁

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-883/idstd883ChangedPages.pdf
Compilation of the Pages Having the Proposed Changes to MIL-STD-883H.
Dated: 4 September 2008 File name: idstd883ChangedPages.pdf, File size: 997 kb 全101頁

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-STD-883
上記ファイルの他、現在正式版である Revision: G及びその分割ファイル等、関連情報はここにまとめられています。

2008-08-12

MIL-HDBK-1861(アセンブリ、プリント配線板、カード、関連部品セレクションガイド) 改正版 Rev.A w/ Change 2 (2008-07-31版 2008-08-01公開)(案) が無償公開されています。

　　1.1 Scope.

This handbook is for guidance only and cannot be cited as a requirement. If it is, the contractor does not have to comply. This handbook consists of the following:

a. Selected standard items, for use in the design and manufacturer of Department of Defense equipment under the jurisdiction of the Department of Defense.

b. Guides for the choice and application of items for use in Department of Defense equipment.

　　1.2 Purpose of this handbook.

a. To provide the equipment designer with a selection of standard items for use in most Department of Defense applications.

b. To control and minimize the variety of items used in Department of Defense equipment in order to facilitate logistic support of equipment in the field.

c. To outline criteria pertaining to the use, choice, and application of items in Department of Defense equipment.

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-HDBK-1861/idhdbk1861not2.pdf
MIL-HDBK-1861A w/Change 2 (Initial Draft)
Selection and Use of Electrical and Electronic Assemblies, Boards, Cards, and Associated Hardware
Dated: 1 August 2008 File name: idhdbk1861not2.pdf, File size: 1489 kb 全36頁

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-HDBK-1861
上記ファイルそのものの他、現在有効な Revision: A, 26 September 2006 も含め、関連情報はここにまとめられています。

2008-07-27

MIL-HDBK-199(抵抗器(セレクションガイド)) 改正版 Rev.B(2008-07-22)(案) が無償公開されています。

　　1.1 Scope.

This handbook is for guidance only. This handbook cannot be cited as a requirement. 　If it is, the contractor does not have to comply.

This handbook consists of the following:

a. Selected standard resistor types, for use in the design and manufacturer of Department of Defense equipment under the jurisdiction of the Department of Defense.
b. Guides for the choice and application of resistors for use in Department of Defense equipment.

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-HDBK-199/idhdbk199.pdf
MIL-HDBK-199B (Initial Draft) Resistors, Selection and Use of
Dated: 22 July 2008 File name: idhdbk199.pdf, File size: 309 kb 全52頁

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-HDBK-199
上記ファイルそのものの他、現在有効な Rev.A(2004-08-24) も含め、関連情報はここにまとめられています。

2008-04-13

MIL-HDBK-103(集積回路リスト) 改正版 Rev.AB(2008-03-10) が無償公開されています。

This handbook provides a list of microcircuits covered by Standard Microcircuit Drawings (SMD's), and their approved sources.

前回情報は 2007-10-14 Rev. AA の情報です。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-HDBK-103/hb103.pdf
List of Standard Microcircuit Drawings
Revision: AB, Dated: 19 March 2008 File name: hb103.pdf, File size: 2.65MB 全861頁

2008-01-14

MIL-PRF-31032 プリント配線板(PWB,PCB)規格(改正案) が無償公開されています。

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-PRF-31032
Performance Specification Printed Circuit Board/Printed Wiring Board, General Specification for (w/Amendment 1) FSC 5998

　・FSC 5998分野 PRF 関連情報は、ここにまとまってあります。
　　FSC 5998: Printed Wiring Boards

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-PRF-31032/idprf31032ss1am3.pdf
Printed Wiring Board, Rigid, Multilayered, Thermosetting Resin Base Material, with or Without Blind and Buried Plated through Holes, for Soldered Part Mounting
Dated: 8 January 2008 File name: idprf31032ss1am3.pdf, File size: 632 kb 全22頁

　　1. SCOPE: 1.1 Scope.
This specification covers the generic performance requirements for rigid, multilayered (three or more conductor layers) printed wiring boards (hereafter designated printed board) with plated holes, that will use soldering for component/part mounting (see 6.1.1).

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-PRF-31032/idprf31032ss2am3.pdf
Printed Wiring Board, Rigid, Single And Double Layer, Woven E-Glass Reinforced Thermosetting Resin Base Material, With or Without Plated Holes, for Soldered Part Mounting
Dated: 8 January 2008 File name: idprf31032ss2am3.pdf, File size: 529 kb 全18頁

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-PRF-31032/idprf31032ss3am3.pdf
Printed Wiring Board, Flexible, Single and Double Layer, With or Without Plated Holes, With or Without Stiffeners, for Soldered Part Mounting
Dated: 8 January 2008 File name: idprf31032ss3am3.pdf, File size: 557 kb 全20頁

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-PRF-31032/idprf31032ss4am3.pdf
Printed Wiring Board, Rigid-Flex or Flexible, Multilayer, with Plated Holes, with or Without Stiffeners, for Soldered Part Mounting
Dated: 8 January 2008 File name: idprf31032ss4am3.pdf, File size: 709 kb 全25頁

2008-01-06

スイッチの選択ガイド(案?) が無償公開されています。

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-HDBK-1132
Switches, Selection and Use of (Initial Draft^*) FSC 5930
　　*: PDFファイルを見る限り 正式発行 のようにも見えるのですが。

　・FSC 5930分野選択ガイド 関連情報は、ここにまとまってあります。
　　FSC 5998: Switches, Non-RF

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-HDBK-1132/hb1132.pdf
Switches, Selection and Use of (Initial Draft)
Revision: -, Dated: 17 December 2008 File name: hb1132.pdf, File size: 717 kb 全26頁

　　1. SCOPE

1.1 Scope. This handbook is for guidance only. This handbook cannot be cited as a requirement. If it is, the contractor does not have to comply.
This handbook consists of the following:

a. Selected standard switches, for use in the design and manufacturer of Department of Defense equipment under the jurisdiction of the Department of Defense.
b. Guides for the choice and application of switches for use in Department of Defense equipmen

　　・・・

2007-12-24

プリント配線板試験法関係民間規格適用廃止 EPS(Engineering Practices Study) が無償公開されています。

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=5998EPStudies
Engineering Practices Studies for Semiconductor Devices FSC 5961

　・FSC 5998分野 EPS 関連情報は、ここにまとまってあります。
　　FSC 5998: Printed Wiring Boards

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/5998EPStudies/ideps5998-2008-008.pdf
Engineering Practices Study for Data Gathering for the Purpose of Withdrawal of Adoption of Non-Government Standard (NGS) Test Methods for Environmental Tests of Laminates;
Dated: 20 December 2007 File name: ideps5998-2008-008.pdf, File size: 31 kb

The NGS documents listed in the attached table are being considered for possible withdrawal of DoD adoption. These IPC-TM-650 test methods for testing laminates for resistance to environmental conditions were referenced by MIL-S-13949, which has been canceled. These NGS test methods are not referenced within any other DoD standardization document.

　　IPC-TM-650 Number 2.6.2.1, 2.6.17 (PDF文書) へのリンクが有ります。

2007-12-16

MIL-STD-750(半導体試験法)関係 EPS(Engineering Practices Study) が無償公開されています。

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=5961EPStudies
Engineering Practices Studies for Semiconductor Devices FSC 5961

　・FSC 5961分野 EPS 関連情報は、ここにまとまってあります。
　　FSC 5961: Diodes, Rectifiers(Semiconductors), Thyristors, Transistors

　　・各ZIPファイル を解凍すると MS-Wordファイル になります。: http://www.dscc.dla.mil/Downloads/MilSpec/Docs/5961EPStudies/epstudystd750.zip
Engineering Practices Study to Update Requirements for MIL-STD-750 Test Methods Main Body.
Dated: 7 December 2007 File name: epstudystd750.zip, File size: 179 kb; http://www.dscc.dla.mil/Downloads/MilSpec/Docs/5961EPStudies/epstudystd750tm2071.zip
Engineering Practices Study to Update Requirements for MIL-STD-750 Test Method 2071.
Dated: 10 December 2007 File name: epstudystd750tm2071.zip, File size: 3125 kb; http://www.dscc.dla.mil/Downloads/MilSpec/Docs/5961EPStudies/epstudystd750tm2102.zip
Engineering Practices Study to Update Requirements for MIL-STD-750 Test Method 2102.
Dated: 14 December 2007 File name: epstudystd750tm2102.zip, File size: 95 kb; http://www.dscc.dla.mil/Downloads/MilSpec/Docs/5961EPStudies/epstudystd750tm1018.zip
Engineering Practices Study to Update Requirements for MIL-STD-750 Test Method 1018.
Dated: 14 December 2007 File name: epstudystd750tm1018.zip, File size: 65 kb

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-STD-750
現在有効な MIL-STD-750E本体他は、ここに有ります。

MIL-STD-750E 1. SCOPE: 1.1 Purpose. This standard establishes uniform methods for testing semiconductor devices, including basic environmental tests to determine resistance to deleterious effects of natural elements and conditions surrounding military operations, and physical and electrical tests.　・・・

2007-12-10

MIL-STD-1669(丸形耐候性コネクタ電極ピン配列) が無償公開されています。進駐軍のジープ搭載無線機に付いていたような気が・・・

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-1669/std1669.pdf
Insert Arrangements for MIL-DTL-26482 Environment Resisting, Circular, Electrical Connectors
Revision: A, Dated: 29 October 2007 File name: std1669.pdf, File size: 1079 kb 全65頁

　1. SCOPE: 1.1 Scope. This standard covers insert arrangements for use with MIL-DTL-26482 environment resisting, circular, electrical connectors.

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-DTL-26482
MIL-DTL-26482 そのものはここに有ります。

2007-11-25

プリント基板の鉛フリー/使用表示 の 民間規格(IPC)採用案(Initial Draft) が公開されています。
MIL簡素化:に伴う民間規格採用通知である「採用条件のみを記載したADOPTION NOTICE」は、 本文1頁程度 の簡単なもので、該民間規格(ex. J-STD-609) そのものは、通常 MIL自身からは公開されていません。
　　但し、今回規格は JEDEC による 無償公開対象(後述) になっています。

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=IPC
DOD Adaptions of Association Connecting Electonics Industries Standard (IPC)
　・IPC関連ADOPTION NOTICE は、ここにまとまってあります。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/IPC/idstd609not1.pdf
Initial Draft Notice of Adoption of Non-Government Standard J-STD-609, "Marking and Labeling of Components,PCBs and PCBAs to Identify Lead (Pb), Pb-Free and Other Attributes"; Project Number 59GP-2008-004
Dated: November 19, 2007
File name: idstd609not1.pdf, File size: 34 kb 全2頁

　　NOTE:

This draft, dated 19 November 2007 prepared by DLA-CC, has not been approved and is subject to modification. DO NOT USE PRIOR TO APPROVAL. PROJECT 59GP-2008-004

　　ADOPTION NOTICE

J-STD-609, "Marking and Labeling of Components,PCBs and PCBAs to Identify Lead (Pb), Pb-Free and Other Attributes", was adopted on day-month-year for use by the Department of Defense (DoD).
Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Defense Logistics Agency, Defense Supply Center Columbus, ATTN DSCC-VAC, P.O. Box 3990, Columbus OH 43218-3990.
Copies of this standard may be purchased from the IPC - Association Connecting Electronics Industry (IPC), 3000 Lakeside Drive, Suite 309 S, Bannockburn, IL 60015-1249 or http://www.ipc.org; or the Solid State Technology Association (JEDEC), 2500 Wilson Boulevard, Arlington, VA 22201-3834 or http://www.jedec.org.

http://portal.ipc.org/downloads/freeDownloads/J-STD-609.pdf
IPC/JEDEC J-STD-609, May 2007, Supersedes JESD97 and IPC-1066
そのもの(全20頁)は、ここでJEDECにより無償公開されています。

　　1 SCOPE: This standard applies to components and assemblies that contain Pb-free and Pb-containing solders and finishes.; This standard describes the marking of components and the labeling of their shipping containers to identify their 2nd level terminal finish or material, and applies to components that are intended to be attached to boards or assemblies with solder or mechanical clamping or are press fit.; This standard also applies to 2nd level terminal materials for bumped die that are used for direct board attach.　・・・

2007-11-18

光ファイバ試験法 の 案(Initial Draft) が無償ダウンロード可能になっています。

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=DSCC_Drawings
Initial Draft DSCC Drawings
　・DSCC Drawings(Initial Draft) 関連情報は、ここにまとまってあります。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/DSCC_Drawings/id07022.pdf
Selection Test, Cable Assembly, Fiber Optic, High Quality Reference (HQRC)
Dated: 14 November 2007
File name: id07022.pdf, File size: 128 kb 全11頁

　　1. SCOPE: 1.1 Scope. This drawing provides detailed information and guidance to personnel for testing the loss and selecting high quality jumper cable assemblies. These jumpers are referred to as High Quality Reference Cables (HQRCs) and typically consist of ST connectors on one end and ST or other Military specification connector on the other end.

2007-11-11

DIPスイッチ一般規定 MIL-PRF-83504 の 改正案(Rev.C w/ Am1 Initial Draft) が無償ダウンロード可能になっています。

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-PRF-83504
Switches, Dual In-Line Package (DIP), General Specification For
FSC 5930
　・MIL-PRF-83504 関連情報は、ここにまとまってあります。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-PRF-83504/idprf83504am1.pdf
Switches, Dual in-Line Package (DIP) General Specification for
Dated: 7 November 2007
File name: idprf83504am1.pdf, File size: 89 kb 全33頁

　　1. SCOPE: 1.1 Scope. This specification covers the general requirements for dual in-line package (DIP) switches designed for direct insertion into printed circuit boards, plug in sockets components, and panel boards primarily for use in electronic and communications equipment

2007-10-28

電子部品用粘着ラベル の EPS(Engineering Practices Study) が無償ダウンロード可能になっています。

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=59GPEPStudies
Engineering Practices Studies for Electronics, General Purpose FSC 59GP
　・FSC 59GP 関連情報は、ここにまとまってあります。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/59GPEPStudies/EPStudyCompMarkAdhLab.pdf
Using Polyimide or Other Type Adhesive Labels for Electronic Parts Marking in Military and Space Applications
Dated: 23 October 2007 File name: EPStudyCompMarkAdhLab.pdf, File size: 151 kb 全33頁

　　I. OBJECTIVE: To determine if adhesive label marking of electronic parts is a reliable and prudent choice given the harsh environment presented to military and space components and given the heightened awareness of electronic component counterfeiting.
　　II. BACKGROUND: In late July 2007, at a NASA Electronic Parts Assurance Group (NEPAG) meeting, the subject of using adhesive labels for electronic parts marking was broached with respect to their use on military and space qualified parts. One of the participants had concerns about the susceptibility of this marking technique to subsequent part processing/handling and wanted to know if DSCC had any established rules on the use of labels.　・・・
　　III. RESULTS
　　　Label and adhesive materials:: A review of the internet revealed no studies directed specifically at the use of adhesive labels for electronic part marking. The research did however find a number of manufacturers, including the following, who offer label material and adhesives for use in parts marking:　・・・・・
　　IV. CONCLUSIONS: 　　・・・・・
　　V. RECOMMENDATIONS: 　　・・・・・
　　APPENDIX: REPORT ON IUID(Identify UID) LABELS AND ADHESIVES

2007-10-14

MIL-HDBK-103(集積回路リスト) 改正版 Rev.AA(2007-09-19) が無償公開されています。

This handbook provides a list of microcircuits covered by Standard Microcircuit Drawings (SMD's), and their approved sources.

前回情報は 2006-10-01 Rev. Y の情報です。

前版情報 : 2007-03-29 Rev. Z は ご紹介洩れ となっています。

Rev. No. は
A, B, → Y, Z, AA, AB,・・・
となります。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-HDBK-103/hb103.pdf
List of Standard Microcircuit Drawings
Revision: AA, Dated: 19 September 2007 File name: hb103.pdf, File size: 2785 kb 全857頁

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-HDBK-103
上記ファイルそのものの他、分割ファイル、 .TXT版、.MDBも含め、関連情報はここにまとめられています。

2007-09-17

MIL-HDBK-1132 スイッチのセレクションガイド(Initial Draft) が無償ダウンロード可能になっています。

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-HDBK-1132
Switches, Selection and Use of (Initial Draft)
　・MIL-HDBK-1132 関連情報は、ここにまとまってあります。

This is the initial draft of MIL-HDBK-1132, replacing MIL-STD-1132 which was cancelled on 20 June 1999.

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-HDBK-1132/idhb1132.pdf
Switches, Selection and Use of (Initial Draft) Revision: -,
Dated: 10 September 2007 File name: idhb1132.pdf, File size: 200 kb , File size: 200 kb 全27頁

1. SCOPE: 1.1 Scope. This handbook is for guidance only. This handbook cannot be cited as a requirement. If it is, the contractor does not have to comply. This handbook consists of the following:; a. Selected standard switches, for use in the design and manufacturer of Department of Defense equipment under the jurisdiction of the Department of Defense.; b. Guides for the choice and application of switches for use in Department of Defense equipment.
Requirements for switches listed in this handbook are covered in the applicable specification (see 2.1). When it has been determined that requirements cannot be met by using switch styles or characteristics listed in the applicable specifications, the design engineer should, with the approval of the cognizant activity, select from the applicable switch specification styles or characteristics not listed herein.

2007-07-08

プリント配線板(PWB 昔は PCB) の EPS(Engineering Practices Study) が無償ダウンロード可能になっています。

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=5998EPStudies
Engineering Practices Studies for Printed Wiring Boards FSC 5998
　・FSC 5998 関連情報は、ここにまとまってあります。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/5998EPStudies/ideps5998-2007-033.pdf
Test Methods for Mechanical Tests for Laminates and Prepregs (Initial Draft)
Engineering Practices Study for Data Gathering for the purpose of Withdrawal of Adoption of Non-Government Standard (NGS) Test Methods for Mechanical Tests of Laminates and Prepregs
Dated: 29 June 2007 File name: ideps5998-2007-033.pdf, File size: 97 kb 全2頁

IPC-TM-650規格の対応部分(下記: 無償閲覧可) へのリンクが記載されています。

2.4.4 Rev.B Flexural Strength of Laminates (at Ambient Temperature)
2.4.4.1 Rev.A Flexural Strength of Laminates (at Elevated Temperature)
2.4.8.2 Rev.A Peel Strength of Metallic Clad Laminates at Elevated Temperature (Hot Fluid Method)
2.4.24 Rev.C Glass Transition Temperature and Z-Axis Thermal Expansion by TMA

2007-05-20

MIL-HDBK-454(電子機器設計ドキュメント選択ガイド) が無償公開されています。

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-HDBK-454
General Guidelines for Electronic Equipment : FSC GDRQ
　・MIL-HDBK-454　関連情報は、ここにまとまってあります。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-HDBK-454/hdbk454.pdf
MIL-HDBK-454 General Guidelines for Electronic Equipment
Revision: B, Dated: 15 April 2007 File name: hdbk454.pdf, File size: 3903 kb 全208頁

　　1. SCOPE

1.1 Guidelines applicable to electronic equipment.
This handbook provides guidance and lessons learned in the selection of documentation for the design of electronic equipment. This handbook is for guidance only and cannot be cited as a requirement. If it is, the contractor does not have to comply.

INDIVIDUAL GUIDELINES

Guideline 1 Safety Design Criteria - Personnel Hazards pp.8-18
Guideline 2 Capacitors pp.19-20
Guideline 3 Flammability
Guideline 4 Fungus Inert Materials
Guideline 5 Soldering
Guideline 6 Bearings
Guideline 7 Interchangeability
　　　・・・・・
Guideline 77 Integrated Diagnostics pp.203-204
Guideline 78 Producibility p.205

MIL-PRF-28861C(RF/電子干渉抑制フィルタ汎用規格) 案(w/Amendment 2) が無償公開されています。

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-PRF-28861
Filters and Capacitors, Radio Frequency/Electromagnetic Interference Suppression, General Specification for (現在有効なのは w/Amendment 1) : FSC 5915
　・現在有効な w/Amendment 1 を含め、関連情報は、ここにまとまってあります。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-PRF-28861/idprf28861am2.pdf
MIL-PRF-28861C w/Amendment 2 (Initial Draft)
Filters and Capacitors, Radio Frequency/Electromagnetic Interference Suppression, General Specification for
Dated: 17 May 2007 File name: idprf28861am2.pdf, File size: 1122 kb 全45頁

MIL-PRF-55110G(プリント配線板汎用規格) 案(w/Amendment 2) が無償公開されています。

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-PRF-55110
Performance Specification, Printed Wiring Board, Rigid, General Specification for (現在有効なのは w/Amendment 1) : FSC 5998
　・現在有効な w/Amendment 1 を含め、関連情報は、ここにまとまってあります。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-PRF-55110/idprf55110am2.pdf
MIL-PRF-55110G w/Amendment 2 (Initial Draft)
Printed Wiring Board, Rigid, General Specification for Dated: 17 May 2007
File name: idprf55110am2.pdf, File size: 1429 kb 全89頁

MIL-STD-1698A(丸形コネクタ電極ピン配列) (改正案: Initial Draft) が無償公開されています。

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-STD-1698
Insert Arrangements for High Shock Circular Electrical Connectors : FSC 5935
　・現在有効な MIL-STD-1698(1978版) を含め、関連情報は、ここにまとまってあります。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-1698/idstd1698.pdf
MIL-STD-1698A (Initial Draft)
Insert Arrangements for MIL-C-28840 High Density High Shock Circular Electrical Connectors
Dated: 16 May 2007 File name: idstd1698.pdf, File size: 730 kb 全30頁

　　表書き　This letter is an initial draft notice of the subject document.

This document is being revised to do the following:

Remove references to canceled documents and add superseding documents.
Clean up the drawings.
Update the format.

2007-05-13

民間標準 IPC(1999年までは Institute of Interconnecting and Packaging Electronic Circuits プリント配線板関係標準で有名) の MIL規格としての適用状況変化(適用廃止)通知が無償公開されています。

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=IPC
DoD Adoptions of Association Connecting Electronics Industries Standards (IPC)
　・IPC関連標準の適用状況　は、ここにまとまってあります。

MIL簡素化を目的に、民間標準の取り込みが積極的に行われ、IPC以外も各種標準が採用されています。
　・その他民間標準全体については http://www.dscc.dla.mil/Programs/MilSpec/default.asp?DocTYPE=NGS に一覧があります。
これらの場合、民間標準の適用の可否と条件 が、Adoption Notice として公開されますが、民間標準そのもの が公開されているわけではありません。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/IPC/ipctm650_2.3.1.1.pdf
IPC-TM650 2.3.1.1 - Withdrawal of Adoption Notice
Chemical Cleaning of Metal-Clad Laminate
Dated: 27 April 2007 File name: ipctm650_2.3.1.1.pdf, File size: 42 kb 全1頁

　本文は

　　WITHDRAWAL OF ADOPTION NOTICE: The Department of Defense has determined it no longer has an interest in IPC-TM-650 number 2.3.1.1, "Chemical Cleaning of Metal-Clad Laminate", and is hereby withdrawing its adoption of this document as of 27 April 2007.
　　と書いてあるのみです。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/IPC/ipctm650_2.3.4.3.pdf
IPC-TM650 2.3.4.3 - Withdrawal of Adoption Notice
Chemical Resistance of Core Materials to Methylene Chloride
Dated: 27 April 2007 File name: ipctm650_2.3.4.3.pdf, File size: 42 kb 全1頁

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/IPC/ipctm650_2.3.7.1.pdf
IPC-TM650 2.3.7.1 - Withdrawal of Adoption Notice
Cupric Chloride Etching Method
Dated: 27 April 2007 File name: ipctm650_2.3.7.1.pdf, File size: 42 kb 全1頁

2007-04-30

MIL-R-90 精密級固定巻き線抵抗器の 一部保守化通知が無償公開されています。

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-R-93
Resistors, Fixed, Wire-Wound (Accurate), General Specification for FSC 5905
　MIL-R-90 関連情報は、ここにまとまってあります。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-R-93/mil93sup.pdf
List of MIL-R-93 Associated Specifications
Dated: 5 April 2007 File name: mil93sup.pdf, File size: 42 kb 　全1頁
MIL-R-93/10～MIL-R-93/20 保守化(INACTIVE)通知一覧 です。

代替規格情報等は、上述のHPにある下記のような個別文書の頭に記述されています。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-R-93/mil93ss10am1.pdf
Resistors, Fixed, Wire-Wound (Accurate), Style RB52
Dated: 5 April 2007 File name: mil93ss10am1.pdf, File size: 76 kb 　全4頁

2007-04-22

MIL-STD-750E(2006-12-27お知らせ) 半導体試験法 の Change Summary(変更点を抽出した表)が無償公開されています。

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-STD-750
Test Method Standard : Test Methods for Semiconductor Devices
　MIL-STD-750 関連情報は、ここにまとまっています。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-750/std750ChangeSumm.pdf
Summary of Changes for MIL-STD-750, Revision E.
Dated: 18 April 2007 File name: std750ChangeSumm.pdf, File size: 118 kb 　全5頁

MIL-DTL-17 高周波ケーブル の NOTICE OF CANCELLATION(廃版通知) が多数発行されています。

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-DTL-17
Cables, Radio Frequency, Flexible and Semirigid, General Specification For
　MIL-DTL-17 関連情報は、ここにまとまっています。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-DTL-17/mil17ss155not3.pdf
MIL-C-17/155A, Dated 18 July 1985, Is Hereby Canceled. Future Acquisitions for This Item May Refer to MIL-C-17/28. Dated: 13 March 2007 File name: mil17ss155not3.pdf, File size: 12 kb 　全1頁

　　・・・ 他多数

2007-03-25

Engineering Practices Studies for Printed Wiring Boards FSC 5998
プリント配線板 EPS 2件が無償公開されています。

http://www.dscc.dla.mil/Programs/MilSpec/listdocs.asp?BasicDoc=5998EPStudies

　FSC 5998 EPS 関連情報は、ここにまとまっています。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/5998EPStudies/EPS_5998-2007-008.pdf
Test Methods for Chemical Based Tests for Laminates and Prepregs (Final Report)
Dated: 15 March 2007 File name: EPS_5998-2007-008.pdf, File size: 57 kb 　全4頁

Engineering Practices Study for Data Gathering for the Purpose of Withdrawal of Adoption of Non-Government Standard Test Methods for Chemical Based Tests for Laminates and Prepregs

　・II. BACKGROUND:: The four NGS(民間標準) documents, IPC-TM-650 test methods, were referenced and used by MIL-S-13949 for evaluating the chemical properties of both laminates and prepreg materials. The four NGS documents are no longer needed for DoD use since MIL-S-13949 has been canceled without replacement.
　・III. RESULTS:: An electronic mail message survey was sent to 20 Department of Defense and Government activities asking for their comments or concurrence concerning the withdrawal of the four NGS documents. All responses were in concurrence with the withdrawal of the four NGS documents. There were no negative or essential comments submitted.

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/5998EPStudies/ideps5998-2007-017.pdf
EP Study (Initial Draft)
Dated: 20 March 2007 File name: ideps5998-2007-017.pdf, File size: 100 kb 　全2頁

　Engineering Practices Study for Data Gathering for the Purpose of Withdrawal of Adoption of Non-Government Standard (NGS) Test Methods for Visual Inspections of Laminates and Prepregs

The NGS documents listed in the attached table are being considered for possible withdrawal of DoD adoption review and comment. These IPC-TM-650 test methods for chemical based tests were referenced by MIL-S-13949, which has been canceled. These NGS test methods are not referenced within any other DoD standardization document.

The attached table lists the subject NGS test methods, including their current revision, title, date, and hyperlinks to the files.

Concurrence or comments regarding the withdrawal of adoption of the test methods are required at this Center no later than 45 days from the date of this letter.　・・・

IPC-TM-650 Number	Rev	Title and URL	Date
2.1.6	B	Thickness of Glass Fabric http://www.ipc.org/4.0_Knowledge/4.1_Standards/test/2.1.6.pdf	12/94
2.1.7	C	Thread Count of Glass Fabric http://www.ipc.org/4.0_Knowledge/4.1_Standards/test/2.1.7.pdf	12/94
2.1.10	A	Visual Inspection for Undissolved Dicyandiamide http://www.ipc.org/4.0_Knowledge/4.1_Standards/test/2.1.10.pdf	12/94

2007-03-04

EP Study for Fiber Optic Specification Finder
光ケーブル Spec finder EPS が無償公開されています。

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=60GPEPStudies
Engineering Practices Studies for Fiber Optics Materials, Components, Assy & Accessories
　FSC 60GP EPS 関連情報は、ここにまとまっています。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/60GPEPStudies/FibOptSpecFindEPstudy.pdf
EP Study for Fiber Optic Specification Finder
An engineering practices study is being conducted to determine the search criteria for a fiber optic specification finder. Once established, the Fiber Optic Specification Finder will facilitate identification of Military Specifications, given the selected criteria.
Dated: 1 March 2007 File name: FibOptSpecFindEPstudy.pdf, File size: 31 kb 　全6頁

下記のような対応規格記載箇所の表が 4頁あります
Database				Specification(s)
	Categories
		Search Criteria
			Drop downs
FIBER OPTIC
	Optical Fiber			MIL-PRF-49291, /1, /2, /3, /4, /6, /7
		Type
			Multimode (I)	/1, /2, /3, /4, /6
			Single-mode (II)	/7
		Class
			Graded index: 3>g>1 (1)	/1, /2, /3, /4, /6
			Quasi-graded index: 10>g>3	/2, /4
			Step index: g>10 (3)
			・・・	・・・

2007-02-25

High Frequency Applications Printed Wiring Board EP Study (Final Report) プリント配線板 EPS が無償公開されています。

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=5998EPStudies
　FSC 5998 EPS 関連情報は、ここにまとまっています。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/5998EPStudies/EPS-5998-2007-002.pdf
High Frequency Applications Printed Wiring Board EP Study (Final Report)
Engineering Practices Study to Develop Requirements for Printed Boards Designed for High Frequency Applications
Dated: 9 February 2007 File name: EPS-5998-2007-002.pdf, File size: 945 kb 　全42頁

　・I. OBJECTIVES:: To solicit input from custodians, review activities, users, and manufacturers on a proposed new specification sheet to MIL-PRF-31032 addressing printed boards for high frequency applications.
　・MIL-PRF-31032/EE PROPOSAL: PRINTED WIRING BOARD, RIGID, MULTILAYERED, THERMOPLASTIC OR THERMOPLASTIC AND THERMOSETTING RESIN BASE MATERIAL, WITH PLATED THROUGH HOLES, FOR HIGH FREQUENCY APPLICATIONS

　・FSC: Federal Supply Classes:

FSC 5998 : Printed Wiring Boards

　・FSC指定 による検索可能 : http://www.dscc.dla.mil/Offices/Doc_Control/stditems.asp

2007-02-12

MIL-DTL-39028E (Initial Draft) Capacitors, Packaging of キャパシタのパッケージング(包装・標示等)規格 改正案 が無償公開されています。

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-DTL-39028
　現在有効な MIL-DTL-39028 Rev. D を含め、関連情報は、ここにまとまっています。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-DTL-39028/idprf39028.pdf
Capacitors, Packaging of
Dated: 6 February 2007 File name: idprf39028.pdf, File size: 62 kb 　全11頁
　　ファイル名の頭に「id(Initial Draft)」が付くものは全て「案」です。

　本文中の追加、削除部分が、明確に色分けされています。
　・1. SCOPE: 1.1 Scope. This specification covers the requirements for the preservation, packing, and container marking of all types of capacitors and associated accessories that are primarily in FSC 5910 (see 6.1).
　・3. REQUIREMENTS
　　・3.1 General. The packaging terms used herein shall be in accordance with the definitions
　　　　　listed in MIL-STD-129 and MIL-STD-2073-1. The following general requirements apply,
　　　　　as applicable, to military and commercial　packaging.: 3.1.1 Pairs, sets, and kits. Capacitors furnished in pairs, sets, or kits under one national stock number (NSN) shall be unit packed as one pair, one set, or one kit, as applicable. When individual unit packs are used to make up a pair, set, or kit of capacitors, these packs shall not be glued, stapled, or taped together but shall be enclosed within close fitting container.; 3.1.2 Hardware. Hardware accompanying capacitors shall be protected and enclosed within the unit packs in a manner that will not damage the capacitors or packaging materials. When practical, the hardware should be mounted on each capacitor.; 　・・・

2007-01-28

Fiber Optic Shock Fixtures の EPS(Engineering Practices Studies) が無償公開されています。

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=60GPEPStudies
　FSC 60GP 関連情報は、ここにまとまっています。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/60GPEPStudies/FiberOptShockFix.pdf
Develop shock fixture drawings and documentation for fiber optic connectors and cables.
Dated: 18 January 2007 File name: FiberOptShockFix.pdf, File size: 256 kb 　全23頁

　・I. OBJECTIVES:: Develop shock fixture drawings and documentation for fiber optic connectors and cables. The final draft of the documentation will be used as guidelines to facilitate the use of standard test fixtures, test fixture setups, and requirements for qualification to fiber optic Defense standardization documents for FSC 60.

FSC: Federal Supply Classes:

FSC 6010 : Fiber Optic Conductors
FSC 6015 : Fiber Optic Cables
・・・
FSC 6080 : Fiber Optic Kits & Sets
FSC 60GP : Fiber Optics Materials, Components, Assy & Accessories

FSC指定 による検索可能 : http://www.dscc.dla.mil/Offices/Doc_Control/stditems.asp

2006-12-27

半導体試験法 MIL-STD-750E(改訂正式版) が無償公開されています。

　前回情報 : 2006-08-27 の情報(改正案)

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-STD-750
　MIL-STD-750関連情報は、ここにまとまっています。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-750/std750.pdf
Test Method Standard Test Methods for Semiconductor Devices Revision: E, Dated: 20 November 2006 File name: std750.pdf, File size: 9854 kb　全685頁
全体を一つにまとめたファイルです。分割ファイル は、上記 STD-750 のHP にあります。

2006-11-19

MIL-PRF-31032/EE Engineering Practice Study (EPS) to Develop Requirements for Printed Boards Designed for High Frequency Applications (高周波用プリント配線板設計) のEPS コメント募集用(INITIAL DRAFT PROPOSAL) が無償公開されています。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/5998EPStudies/ideps-5998-2007-002.pdf
Initial Draft of An Engineering Practice Study (EPS) to Develop Requirements for Printed Boards Designed for High Frequency Applications
Dated: November 14, 2006 File name: ideps-5998-2007-002.pdf, File size: 711 kb 39頁
　・変更部分は黄色(黄色) でマーキングされています。

MIL-PRF-31032/EE　PROPOSAL
　・PERFORMANCE SPECIFICATION SHEET : PRINTED WIRING BOARD, RIGID, MULTILAYERED,THERMOPLASTIC RESIN BASE MATERIAL, WITH PLATED THROUGH HOLES,FOR HIGH FREQUENCY APPLICATIONS: 1.1 Scope. This specification covers the generic performance requirements for rigid, multilayered (three or more conductor layers) printed wiring boards (hereafter designated printed board) with plated holes, constructed of thermoplastic base materials, that will use soldering for component/part mounting (see 6.1.1). Mixed base material printed boards containing both thermoplastic and thermosetting resin base materials are also covered. The printed board may contain an internal metal core or external heat sink.; 1.2 Classification.　・・・

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=5998EPStudies
上記ファイルを含め 関連情報 がここにあります。

2006-10-29

MIL-PRF-38535H (Initial Draft) Integrated Circuits (Microcircuits) Manufacturing, General Specification for (集積回路製造一般仕様) の Rev.H 改正案 が無償公開されています。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-PRF-38535/idprf38535h.pdf
MIL-PRF-38535H (Initial Draft) Integrated Circuits (Microcircuits) Manufacturing, General Specification for
Dated: 26 October 2006 File name: idprf38535h.pdf, File size: 912 kb 203頁
改正案(Rev.H) 本体です。変更(追加/削除)部分が本文中に明示されています。

1. SCOPE: 1.1 Scope. This specification establishes the general performance requirements for integrated circuits or microcircuits and the quality and reliability assurance requirements, which are to be met for their acquisition. The intent of this specification is to allow the device manufacturer the flexibility to implement best commercial practices to the maximum extent possible while still providing product that meets military performance needs. Detail requirements, specific characteristics of microcircuits, and other provisions which are sensitive to the particular use intended will be specified in the device specification.　・・・

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-PRF-38535/id38535h_chg_summary.pdf
MIL-PRF-38535H Change Summary (Initial Draft)
Dated: 25 October 2006 File name: id38535h_chg_summary.pdf, File size: 10 kb 1頁
現在有効な Rev.G と改正案(Rev.H) との差異です。上記、本文中に同一頁があります。

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-PRF-38535
現在有効な Revision: G, Dated: 7 July 2006, 上記ファイルを含め 関連情報 がここにあります。

関連情報として下記のようなものもあります。

QML-38535 Qualified Manufacturers List
Satellite Design Guideline Design Guideline for Electrical & Electronic Parts Used in Satellite Applications to Support Class T and Class J
　・・・

MIL-PRF-8805F PERFORMANCE SPECIFICATION SWITCHES AND SWITCH ASSEMBLIES,SENSITIVE, SNAP ACTION (BASIC, LIMIT, PUSH BUTTON AND TOGGLE SWITCHES), GENERAL SPECIFICATION FOR
の Rev.F(正式版) が無償公開されています。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-PRF-8805/prf8805.pdf
SWITCHES AND SWITCH ASSEMBLIES, SENSITIVE, SNAP ACTION (BASIC, LIMIT, PUSH BUTTON AND TOGGLE SWITCHES), GENERAL SPECIFICATION FOR
Rev. F Dated: 12 October 2006 File name: prf8805.pdf, File size: 1.1 Mb 54頁

1. SCOPE: 1.1 Scope. This specification covers the general requirements for snap action sensitive switches and switch assemblies. The sensitive switch assemblies include limit, push-button, and toggle operated types. The term switches includes switch assemblies, see 6.5.19.　・・・

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-PRF-8805
上記ファイルを含め 関連情報 がここにあります。

2006-10-22

MIL-STD-1560B (Initial Draft) Insert Arrangements for MIL-DTL-38999, MIL-DTL-27599 and MIL-C-29600 Series A Electrical Circular Connectors (丸形コネクタピン配置) のRev. B 改正案 が無償公開されています。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-1560/idstd1560.pdf
MIL-STD-1560B (Initial Draft) Insert Arrangements for MIL-DTL-38999, MIL-DTL-27599 and MIL-C-29600 Series A Electrical Circular Connectors
Dated: 19 October 2006 File name: idstd1560.pdf, File size: 4345 kb 221頁

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-STD-1560
現在有効な Revision: A, Dated: 1 December 1975, 追加 Notice 1～8、上記ファイルを含め 関連情報 がここにあります。

2006-10-09

MIL-HDBK-1861A SELECTION AND USE OF ELECTRICAL AND ELECTRONIC ASSEMBLIES,BOARDS, CARDS, AND ASSOCIATED HARDWARE (アセンブリ、プリント板、カード等選択ガイド) の正式改正版 Rev.A w/Change 1 が無償公開されています。

元になった改正案については、 2006-06-11の情報をご参照ください。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-HDBK-1861/hb1861.pdf
Selection and Use of Electrical and Electronic Assemblies, Boards, Cards, and Associated Hardware (w/Change 1)
Revision: A, Dated: 26 September 2006
File name: hb1861.pdf, File size: 577 kb 30頁

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-HDBK-1861
上記ファイルを含め 関連情報 がここにあります。

2006-10-01

MIL-HDBK-103(集積回路リスト) 改正版 Rev.Y(2006-09-13) が無償公開されています。
　　前回情報は 2006-03-26 Rev. X の情報です。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-HDBK-103/hb103.pdf
List of Standard Microcircuit Drawings
Revision: Y, Dated: 13 September 2006 File name: hb103.pdf, File size: 3009 kb 全870頁

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-HDBK-103
上記ファイルそのものの他、分割ファイル、 .TXT版、.MDBも含め、関連情報はここにまとめられています。

2006-08-27

半導体試験法 MIL-STD-750E(改訂最終案) 及び 電子装置汎用ガイド MIL-HDBK-454B(改定案) が無償公開されています。

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-STD-750
現在有効な 750D を含め、MIL-STD-750関連情報は、ここにまとまっています。
　前回情報 : 2005-01-23 の情報

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-750/id2std750.zip
MIL-STD-750E (Initial Draft) Second Initial Draft of MIL-STD-750 Test Methods Test Methods for Semiconductor Devices
Dated: 18 August 2006 File name: id2std750.zip, File size: 3857 kb

上記ZIPファイルを解凍すると、改訂対象試験方法の一覧(750FDletter.doc:下記) 及び個々の試験項目別ファイルが生成されます。

[ 750FDletter.doc ]
　The following is a summary of the technical changes in MIL-STD-750. This final draft review identifies only 20 test methods attached. All other changes are editorial in nature.

1018 INTERNAL GAS ANALYSIS: Most Changes were generated by DSCC qualification. Some comments were received from equipment manufactures.
1019 STEADY-STATE TOTAL DOSE IRRADIATION PROCEDURE: All changes were written by our JEDEC radiation committees
　　・・・・・
4081 THERMAL RESISTANCE OF DIODES: All changes were written by JC-22 and Microsemi. Significant and extension content changes and additions.

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-HDBK-454
現在有効な 454A を含め、MIL-HDBK-454関連情報は、ここにまとまっています。
This handbook covers the common guidelines to be used in military specifications for electronic equipment.

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-HDBK-454/idhd454.pdf
MIL-HDBK-454B (Initial Draft) General Guidelines for Electronic Equipment
Dated: 21 August 2006 File name: idhd454.pdf, File size: 3417 kb

2006-08-13

Engineering Practices Studies for Printed Wiring Boards FSC 5998 にプリント板試験方法関連情報が無償公開されています。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/5998EPStudies/SolderTM_EPStudy.pdf
Coordination of Non-Government Standard J-STD-003B Covering Solderability Test Methods for Printed Wiring Boards
Dated: 9 August 2006
File name: SolderTM_EPStudy.pdf, File size: 213 kB

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/5998EPStudies/PWB_EPStudy.pdf
Review of Non-Government Standards Covering Printed Wiring Board Test Methods for Verifying Dimensional and Mechanical Properties Dated: 8 May 2006
File name: PWB_EPStudy.pdf, File size: 21 kb

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=5998EPStudies
上記2件を含め 関連情報 がまとめられてあります。

2006-06-11

MIL-HDBK-1861A SELECTION AND USE OF ELECTRICAL AND ELECTRONIC ASSEMBLIES,BOARDS, CARDS, AND ASSOCIATED HARDWARE (アセンブリ、プリント板、カード等選択ガイド) の改正案が無償公開されています。

現在有効な Rev.A(2005-06-22) との差異が、分かり易く明示されています。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-HDBK-1861/idhdbk1861not1.pdf
Selection and Use of Electrical and Electronic Assemblies, Boards, Cards, and Associated Hardware
Dated: 2 June 2006
File name: idhdbk1861not1.pdf, File size: 917 kb 31頁

1. SCOPE
1.1: 1.1 Scope. This handbook is for guidance only and cannot be cited as a requirement. If it is, the contractor does not have to comply. This handbook consists of the following:
　a. Selected standard items, for use in the design and manufacturer of Department of Defense equipment under the jurisdiction of the Department of Defense.
　b. Guides for the choice and application of items for use in Department of Defense equipment.
1.2: 1.2 Purpose of this handbook.
　a. To provide the equipment designer with a selection of standard items for use in most Department of Defense applications.
　b. To control and minimize the variety of items used in Department of Defense equipment in order to facilitate logistic support of equipment in the field.
　c. To outline criteria pertaining to the use, choice, and application of items in Department of Defense equipment.
5. DESIGN GUIDANCE
5.1: 5.1 Printed wiring board size. Whenever cost and technical requirements permit, preferred rigid printed wiring board sizes should be used. These printed wiring board sizes will facilitate the development and use of standardized insertion and extraction tools. The preferred printed wiring board sizes, extractor hole size, and location　・・・

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-HDBK-1861
現在有効な Rev.A(458 kB 26頁)、改定案(上記ファイル)を含め 関連情報 があります。

2006-04-23

MIL-PRF-38534 Hybrid Microcircuits, General Specification for (混成集積回路通則) の改正版(Rev. F)(正式版)が無償公開されています。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-PRF-38534/prf38534.pdf
Hybrid Microcircuits, General Specification for
Revision: F, Dated: 12 April 2006 File name: prf38534.pdf, File size: 1099 kb 96頁

1.1 Scope.: This specification establishes the general performance requirements for hybrid microcircuits, Multi-Chip Modules (MCM) and, similar devices and the verification requirements for ensuring that these devices meet the applicable performance requirements. 　・・・

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-PRF-38534/prf38534f_chg_summary.pdf
This is the summary list of major changes incorporated into Revision F of MIL-PRF-38534. Dated: 12 April 2006 File name: prf38534f_chg_summary.pdf, File size: 152 kb 11頁

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-PRF-38534
上記ファイルを含め 関連情報 があります。

MIL-PRF-24236 Switches, Thermostatic, (Metallic and Bimetallic), General Specification for (サーモスイッチ通則) の改正版(Rev. D)(正式版)が無償公開されています。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-PRF-24236/prf24236.pdf
Switches, Thermostatic, (Metallic and Bimetallic), General Specification for
Revision: D, Dated: 5 April 2006 File name: prf24236.pdf, File size: 391 kb 22頁

1.1 Scope.: This specification covers the general requirements for metallic-element actuated, thermostatic switches intended primarily for use in electrical and electronic equipment, in alternating current (ac) and direct current (dc) applications, where temperature protection, overheat detection, or accurate temperature control is required. The operating temperatures and operating temperature ranges of switches are covered by this specification (see 3.1 and 6.2.2).

Switches, Thermostatic, (Metallic and Bimetallic), General Specification for Dated: 5 April 2006 File name: prf24236sup1.pdf, File size: 15 kb 1頁

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-PRF-24236/prf24236ss1.pdf
Switches, Thermostatic, (Bimetallic), Subminiature, Type I, Hermetically Sealed, Single Pole, Single Throw (SPST), 5 Amperes, and Low Level Dated: 5 April 2006 File name: prf24236ss1.pdf, File size: 120 kb 16頁

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-PRF-24236/prf24236ss2.pdf
Switches, Thermostatic, (Bimetallic), Type I, Single Pole, Single Throw (SPST), 5 Amperes Dated: 5 April 2006 File name: prf24236ss2.pdf, File size: 83 kb 9頁

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-PRF-24236/prf24236ss11.pdf
Switches, Thermostatic, (Bimetallic), Type I, Hermetically Sealed, Single Pole, Single Throw (SPST), 1 Ampere Dated: 5 April 2006 File name: prf24236ss11.pdf, File size: 76 kb 8頁

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-PRF-24236/prf24236ss15.pdf
Switch, Thermostatic (Metallic), Type II, Overheat Detector, Adjustable, Single Terminal, 3 Amperes Dated: 5 April 2006 File name: prf24236ss15.pdf, File size: 61 kb 4頁

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-PRF-24236/prf24236ss24.pdf
Switches, Thermostatic, (Bimetallic), Subminiature, Type I, Hermetically Sealed, Single Pole, Double Throw (SPDT), 2 Amperes and Low Level Dated: 5 April 2006 File name: prf24236ss24.pdf, File size: 84 kb 8頁

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-PRF-24236
上記ファイル、今回改正対象外を含め 関連情報 があります。

MIL-PRF-24236 Switches, Thermostatic, (Metallic and Bimetallic), General Specification for (可変抵抗器通則) の改正版(Rev. G)(案)が無償公開されています。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-PRF-94/idprf94.pdf
Resistors, Variable, Composition, General Specification for
Dated: 19 April 2006 File name: idprf94.pdf, File size: 200 kb 33頁

1.1 Scope.: This specification covers the variable resistors having a composition resistance element shaped in an arc, and a contact bearing uniformly thereon, so that a change in resistance is produced between the terminal of the contact and the terminal of either end of the resistance element when the operating shaft is turned. These resistors are capable of full load operation (where maximum resistance is engaged) at a maximum ambient temperature of 70OC, and are capable for continuous operation when properly derated, at a maximum temperature of 120OC (see 6.9).

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-PRF-94/idprf94sup1.pdf
List of MIL-PRF-94F Associated Specifications
Dated: 19 April 2006 File name: idprf94sup1.pdf, File size: 26 kb 2頁

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-PRF-94/idprf94ss2.pdf
Resistors, Variable, Composition, Style RV5
Dated: 19 April 2006 File name: idprf94ss2.pdf, File size: 115 kb 6頁

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-PRF-94/idprf94ss3.pdf
Resistors, Variable, Composition, Style RV6
Dated: 19 April 2006 File name: idprf94ss3.pdf, File size: 148 kb 7頁

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-PRF-94/idprf94ss4.pdf
Resistors, Variable, Composition, Style RV2
Dated: 19 April 2006 File name: idprf94ss4.pdf, File size: 126 kb 6頁

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-PRF-94/idprf94ss5.pdf
Resistors, Variable, Composition, Style RV4
Dated: 19 April 2006 File name: idprf94ss5.pdf, File size: 141 kb 7頁

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-PRF-94/idprf94ss6.pdf
Resistors, Variable, Composition, Style 2RV7
Dated: 19 April 2006 File name: idprf94ss6.pdf, File size: 104 kb 8頁

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-PRF-94/idprf94ss7.pdf
Resistors, Variable, Nonwire-Wound, Printed Circuit Board Mounting, Style RV8
Dated: 19 April 2006 File name: idprf94ss7.pdf, File size: 172 kb 8頁

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-PRF-94
上記ファイル、今回改正対象外を含め 関連情報 があります。

2006-03-26

MIL-STD-883G(Test Method Standard, Microcircuits　集積回路試験方法) の改正版(Rev. G)(正式版)が無償公開されています。
　　なお、元となった規格案の情報は 2005-12-18 に公開されています。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-883/std883.pdf
Test Method Standard, Microcircuits Revision: G, Dated: 28 February 2006
File name: std883.pdf, File size:6105 kb 全716頁

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-883/std883ChangeSumm.pdf
Change Summary Sheets for Revision G of MIL-STD-883
Dated: 17 March 2006 File name: std883ChangeSumm.pdf, File size: 32 kb 全7頁

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-STD-883
上記ファイルの他、分割ファイル等、関連情報はここにまとめられています。

MIL-HDBK-103(集積回路リスト) 改正版 Rev.X(2006-03-21) が無償公開されています。
　　前回情報は 2005-10-10 Rev. W の情報です。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-HDBK-103/hb103.pdf
List of Standard Microcircuit Drawings
Revision: X, Dated: 21 March 2006 File name: hb103.pdf, File size: 2946 kb 全852頁

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-HDBK-103
上記ファイルの分割ファイル、 .TXT版、.MDBも含め、関連情報はここにまとめられています。

2006-03-19

MIL-PRF-1 Electron Tubes(電子管 : ブラウン管、マグネトロン等を含む), General Specification for の改正版(Rev. M / Amendment 2を含む)が無償公開されています。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-PRF-1/prf1.pdf
MIL-PRF-1 Electron Tubes, General Specification for (w/Amendment 2)
Revision: M, Dated: 10 March 2006 File name: prf1.pdf, File size: 432 kb 全76頁

1. SCOPE

1.1 Scope. 　This specification covers the general requirements and ratings for electron tubes used by the military departments.

1.2 Classification. 　This specification is applicable to electron tubes classified in, but not limited to, the categories listed below. The main category into which each tube is classified is indicated in the title of the tube specification sheet (TSS). The subcategory is included as the initial item under the description heading: for example, ELECTRON TUBE, KLYSTRON - - - DESCRIPTION: Reflex oscillator.

1. Beam Switching

2. Cathode Ray

　　　・・・・・

16. Magnetron

　　　・・・・・

25. Receiving

　　　・・・・・

2. APPLICABLE DOCUMENTS

3. REQUIREMENTS

　　　・・・・・

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-PRF-1
上記ファイルの他、関連情報はここにまとめられています。

2005-12-18

MIL-STD-883G(Test Method Standard, Microcircuits　集積回路試験方法) の改正版(Rev. G)(案)が無償公開されています。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-883/idstd883.pdf
MIL-STD-883G (Initial Draft) Test Method Standard Microcircuits
Dated: 13 December 2005 File name: idstd883.pdf, File size: 783 kb 全102頁

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-883/idstd883ChngSum.pdf
Change Summary Sheets for Revision G Initial Draft of MIL-STD-883
Dated: 13 December 2005 File name: idstd883ChngSum.pdf, File size: 85 kb 全6頁

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-STD-883
上記ファイルの他、現在有効な版(Rev.F 4.5MB 全708頁)等、関連情報はここにまとめられており、分割ファイルもあります。

2005-10-10

MIL-HDBK-103(集積回路リスト全833頁) が改正され、Rev.W(2005-09-28) が無償公開されています。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-HDBK-103/hb103.pdf
List of Standard Microcircuit Drawings
Revision: W, Dated: 28 September 2005 File name: hb103.pdf, File size: 2896 kB

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-HDBK-103
上記ファイルの分割ファイル、 .TXT版、.MDBも含め、関連情報はここにまとめられています。

2005-07-03

MIL-HDBK-1861 Selection and Use of Electrical and Electronic Assemblies, Boards, Cards, and Associated Hardware Rev.A (2005-06-22) が無償公開されています。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-HDBK-1861/hdbk1861.pdf
Revision: A, Dated: 22 June 2005 File name: hdbk1861.pdf, File size: 458 kb

1.2 Purpose of this handbook.: a. To provide the equipment designer with a selection of standard items for use in most Department of Defense applications.; b. To control and minimize the variety of items used in Department of Defense equipment in order to facilitate logistic support of equipment in the field. c. To outline criteria

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-HDBK-1861
上記PDFファイルを含め、関連情報はここにまとめられています。

2005-06-26

MIL-STD-690 Failure Rate Sampling Plans and Procedures Rev.D (2005-06-10) が無償公開されています。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-690/std690.pdf
Failure Rate Sampling Plans and Procedures
Revision: D, Dated: 10 June 2005 File name: std690.pdf, File size: 688 kb

This standard provides: procedures for failure rate (FR) qualification, sampling plans for establishing and maintaining FR levels at selected confidence levels, and lot conformance inspection procedures associated with FR testing for the purpose of direct reference in appropriate military electronic parts established reliability (ER) specifications. Figures and tables throughout this standard are based on exponential distribution. Weibull distribution will be acceptable in certain components such as capacitors. ・・・・・

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-STD-690
上記PDFファイルを含め、関連情報はここにまとめられています。

2005-06-19

MIL-HDBK-5961(標準半導体デバイスリスト replaces MIL-STD-701) の改訂版(5961A) の案(2005-06-15版 Initial Draft) が無償公開されています。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-HDBK-5961/idhb5961not1.zip
MIL-HDBK-5961A (Initial Draft) List of Standard Semiconductor Devices
Dated: 15 June 2005 File name: idhb5961not1.zip, File size: 48 kb

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-HDBK-5961
上記PDF、現在有効な MIL-HDBK-5961(1999-11版) を含め関連情報は、ここにあります。

2005-03-28

ライス国務長官(私は前任者が好きですが)の訪日にあわせたように一週間ほど何回トライしてもアクセス不能になっていましたが、その後、復帰しているようです。ただ、メンテナンス等もあり、散発的に接続できないことがあるようですが。

03月28日時点の情報 We're sorry, the page you requested is temporarily unavailable due to scheduled maintenance. The maintenance schedule for this page is as follows:
　　Sundays between 12:00 and 13:00 ET(東部時間)　
　　Daily between 01:00 and 02:00 ET
Please try the page again outside of these time ranges.

MIL-HDBK-103(集積回路リスト) が改正され、Rev.V(2005-03-15) が無償公開されています。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-HDBK-103/hb103.pdf
List of Standard Microcircuit Drawings
Revision: V, Dated: 15 March 2005 File name: hb103.pdf, File size: 2868 kb

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-HDBK-103
上記ファイルの分割ファイル、 .TXT版、.MDBも含め、関連情報はここにまとめられています。

MIL-HDBK-1861A 電子・電子機器用アッセンブリ、ボード類選択・使用ガイド 改定A版案(Initial Draft) が無償公開されています。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-HDBK-1861/idhdbk1861.pdf
Selection and Use of Electrical and Electronic Assemblies, Boards, Cards, and Associated Hardware
Dated: 18 March 2005 File name: idhdbk1861.pdf, File size: 759 kb

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-HDBK-1861
上記ファイルの現在有効な正規版(HDBK-1861 1998版)も含め、関連情報はここにまとめられています。

2005-01-23

半導体試験法　MIL-STD-750E(改訂案) が無償公開されています。

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-STD-750
現在有効な 750D を含め、MIL-STD-750関連情報は、ここにまとまっています。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-750/idstd750.doc
Test Methods for Semiconductor Devices Dated: 21 January 2005 File name: idstd750.doc, File size: 254 kb
本体部分です。改訂の概要はこれで分かります。個別試験の内容は含まれていません。下記ZIPファイルに分割。
表紙の「TEST METHOD MILITARY STANDARD」が、「TEST METHOD STANDARD」と変わっているのが印象的でした。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-750/idstd750_1000.zip
1000 Series Test Methods Dated: 21 January 2005 File name: idstd750_1000.zip, File size: 543 kb

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-750/idstd750_2000.zip
2000 Series Test Methods Dated: 21 January 2005 File name: idstd750_2000.zip, File size: 10353 kb

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-750/idstd750_3000.zip
3000 Series Test Methods Dated: 21 January 2005 File name: idstd750_3000.zip, File size: 2817 kb

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-750/idstd750_4000.zip
4000 Series Test Methods Dated: 21 January 2005 File name: idstd750_4000.zip, File size: 1558 kb

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-750/idstd750_5000.zip
5000 Series Test Methods Dated: 21 January 2005 File name: idstd750_5000.zip, File size: 131 kb

2004-12-05

キャパシタ(コンデンサ)のガイダンス ハンドブック改訂版 MIL-HDBK-183A が無償公開されています。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-HDBK-198/hdbk198.pdf
MIL-HDBK-198 Capacitors, Selection and Use of
Revision: A, Dated: 18 November 2004 File name: hdbk198.pdf, File size: 1621 kb

This handbook is for guidance only. This handbook cannot be cited as a requirement. If it is, the contractor does not have to comply. This handbook consists of the following:

Selected standard capacitor types, for use in the design and manufacturing of Department of Defense equipment under the jurisdiction of the Department of Defense.
Guides for the choice and application of capacitors for use in Department of Defense equipment.

2004-11-07

半導体パッケージの半田耐熱テスト に関するレポートが無償公開されています。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/19500EPStudies/epSolderHeatfinal.pdf
Final Report for Standardization on Soldering Heat Testing for Semiconductors
Dated: 27 October 2004 File name: epSolderHeatfinal.pdf, File size: 729 kB

The objective of this project was to create guidance on how to invoke solder heat testing for each semiconductor package technology. In addition our objective was to study and determine sample size, frequency of test and failure criteria.

半導体製品に対するDPA(Destructive Physical Analysis)テスト に関するレポートが無償公開されています。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/19500EPStudies/epDPAfinal.pdf
Final Report for Destructive Physical Analysis for Diodes and Transistors Under the MIL-PRF-19500 Program Dated: 25 October 2004 File name: epDPAfinal.pdf, File size: 1277 kb

The objective of this study was for the device manufactures, OEMs and the services to come to a consensus on the appropriate use of DPA testing on MIL-PRF-19500 semiconductor product.

MIL-PRF-22710(改正G版:案) スイッチのコード付与法 等に関するもののようです。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-PRF-22710/idprf22710.pdf
Switches, Code Indicating Wheel (Printed Circuit), Thumbwheel and Push-Button, General Specification for
Dated: 28 October 2004 File name: idprf22710.pdf, File size: 163

2004-06-27

MIL-STD-883F(Test Method Standard, Microcircuits　集積回路試験方法) の改正版(Rev. F)が正式に発行され無償公開されています。関連: 2003-12-14

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-883/std883.pdf
Test Method Standard, Microcircuits Revision: F, Dated: 18 June 2004
File name: std883.pdf, File size: 4,534 kb

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-STD-883
上記ファイルの他、関連情報はここにまとめられており、分割ファイル、Rev.F の Change Summary Sheets もあります。

2004-06-13

MIL-STD-1835D(電子部品外形寸法規定) の改正版(Rev. D)が公開されています。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-1835/std1835.pdf
MIL-STD-1835
Electronic Component Case Outlines Revision: D, Dated: 1 June 2004
File name: std1835.pdf, File size: 1197 kb

ケース(パッケージ外形)の命名法、各部寸法を表す記号の定義、各パッケージ寸法などが規定されています。

Item - A: Body dimension, b: Terminal lead dismeters, c: Terminal lead width, D: Body lengths, E: Body widths,,,
Body material - C: Ceramic(Metal-seal), G: Ceramic(Glass-seal), M: Metal,,
Outline - FP: Flat pack, GA: Grid-array, IP: In-line,,,
Lead-form - F: Flat, G: Gulleing, J: J-lead, N: No lead,,,

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-STD-1835
上記ファイルの他、関連情報はここにまとめられています。

なお、この分野の国際規格(半導体素子分野)としては IEC 60191シリーズ: Mechanical standardization of semiconductor devices がある。

IEC 60191-1: (Part 1) 全般
IEC 60191-2: (Part 2) 個々のパッケージの寸法規定(外形図集)
IEC 60191-3: (Part 3) 外形図作成規定
IEC 60191-4: (Part 4) パッケージ命名法
IEC 60191-5: (Part 5) TAB(Tape Automated Bonding)
IEC 60191-6: (Part 6) 表面実装デバイス(SMD)

IEC規格検索: http://www.iec.ch/searchpub/cur_fut.htm

2004-04-04

MIL-PRF-28861C(電磁妨害抑制用フィルタ、キャパシタ) の改正版(Rev. C)が公開されています。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-PRF-28861/prf28861.pdf
MIL-PRF-28861
Filters and Capacitors, Radio Frequency/Electromagnetic Interference Suppression, General Specification for
Revision: C, Dated: 30 March 2004 File name: prf28861.pdf, File size: 1252 kb

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-PRF-28861
上記ファイルの他、関連情報はここにまとめられています。

MIL-HDBK-780(集積回路仕様作成ガイド) の改正案(Initial Draft)が公開されています。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-HDBK-780/idhdbk780.pdf
MIL-HDBK-780D (Initial Draft) Department of Defense Handbook, Standard Microcircuit Drawings
Dated: 26 March 2004 File name: idhdbk780.pdf, File size: 952 kb

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-HDBK-780
上記ファイルの他、現在有効な Rev. C 等、関連情報はここにまとめられています。

MIL-STD-1835(電子部品(ICを含む)外形図) の改正案(Initial Draft)が公開されています。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-1835/idstd1835.pdf
MIL-STD-1835D (Initial Draft)
Electronic Component Case Outlines
Dated: 31 March 2004 File name: idstd1835.pdf, File size: 1265 kb

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-STD-1835
上記ファイルの他、現在有効な Rev. C 等、関連情報はここにまとめられています。

2004-03-28

MIL-HDBK-103(集積回路リスト) が改正されました。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-HDBK-103/hb103.pdf
List of Standard Microcircuit Drawings
Revision: T, Dated: 17 March 2004 File name: hb103.pdf, File size: 2460 kb

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-HDBK-103
上記ファイルの分割ファイル、 .TXT版、.MDBも含め、関連情報はここにまとめられています。

半田耐熱試験(Soldering Heat Testing) に関するレポートです。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/19500EPStudies/epsh.pdf
Standardization on Soldering Heat Testing for Semiconductors
Dated: 20 February 2004 File name: epsh.pdf, File size: 118 kb

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=19500EPStudies
上記ファイルを含め、関連情報はここにまとめられています。

2004-03-07

アルミ電解固定コンデンサの保存に関する HandBook の改正案(Draft) です。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-HDBK-1131/idhdbk1131.pdf
MIL-HDBK-1131A (Initial Draft)
Storage Shelf Life and Reforming Procedures for Aluminum Electrolytic Fixed Capacitors
Dated: 2 March 2004 File name: idhdbk1131.pdf, File size: 58 kb

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-HDBK-1131
MIL-HDBK-1131本体(現在有効) も含め、関連情報はここにまとめられています。

2004-02-01

電気・電子部品のマーキングに関するMIL-STD-1285 Marking of Electrical and Electronic Partsの 製造年週コードに関する規定で 第53週 が存在する場合(2004年等)についての提案です。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-1285/std1285EPstudy.pdf
Marking of Electrical and Electronic Parts
Dated: 26 January 2004 File name: std1285EPstudy.pdf, File size: 29 kb

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-STD-1285
MIL-STD-1285本体、Notice1 等は、ここにまとめられています。

2003-12-14

MIL-STD-883F Test Method Standard, Microcircuits の本体の改定案(Rev.F)が無償ダウンロード可能となっています。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-883/idstd888chgpages.doc
Proposed Change Pages for Revision F Draft
File name: idstd888chgpages.doc, File size: 3517 kb; http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-883/idstd883summary.doc
Change Summary Matrix for Proposed Change Pages for Revision F Draft
File name: idstd883summary.doc, File size: 469 kb
http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-STD-883
現在有効なRev.E本体(2003-04-06参照)、上記ドラフト等、MIL-STD-883 全体の情報があります。

2003-10-14

MIL-HDBK-103 List of Standard Microcircuit Drawings の最新版(Rev.R 2003-09-23 788頁) が無償ダウンロード可能となっています。

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-HDBK-103
MIL-HDBK-103 全体の情報があります。下記ファイル及び 分割版ファイルもあります。: http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-HDBK-103/hb103.pdf
List of Standard Microcircuit Drawings
Revision: R, Dated: 23 September 2003
File name: hb103.pdf, File size: 2,461 kb; テキストファイル版や Microsoft Access(データベース ZIP圧縮)版も上記 URL あります。

2003-04-06

MIL-STD-883E Test Method Standard, Microcircuits の本体(Rev.E)、Notice 1～5 すべてを含む統合版が無償ダウンロード可能となっています。

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-STD-883
MIL-STD-883 全体の情報があります。下記ファイル及び 分割版ファイルもあります。: http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-883/std883inc.pdf
MIL-STD-883 (Complete with Notices 1 through 5)
Front page, 6-section text, all series test methods, (With all Notices included)
Dated: 18 December 2000 File name: std883inc.pdf, File size: 8,870 kb

MIL-HDBK-103 List of Standard Microcircuit Drawings の最新版(Rev.P 2003-03-19) が無償ダウンロード可能となっています。

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-HDBK-103
MIL-HDBK-103 全体の情報があります。下記ファイル及び 分割版ファイルもあります。: http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-HDBK-103/hb103.pdf
List of Standard Microcircuit Drawings
Revision: P, Dated: 19 March 2003
File name: hb103.pdf, File size: 3,066 kb; テキストファイル版や; Microsoft Access(データベース)版(ZIP 圧縮ファイル　http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-HDBK-103/hb103mdb.zipもあります。

2003-03-23

２月に案(Draft)が発表された MIL-STD-883 Notice 5 Test Method Standard, Microcircuits の正式版が無償ダウンロード可能となっています。

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-STD-883 MIL-STD-883 全体の情報があります。: http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-883/std883not5.pdf
MIL-STD-883E Notice 5(正式版) Test Method Standard, Microcircuits
Dated: 7 March 2003 File name: std883not5.pdf, File size: 239 kb

2003-02-02

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-STD-883
MIL-STD-883 全体の情報があります。

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-883/idstd883not5_2ndlook.doc
MIL-STD-883E Notice 5 (Second Look Initial Draft) Test Method Standard, Microcircuits
Dated: 28 January 2003 File name: idstd883not5_2ndlook.doc, File size: 1.8MB

下記の変更があるようです。(原文でご確認ください)

	METHOD	Page	       DATE	

	1014.10	   6	XX Month 2002  	Seal
	1018.3	   1	XX Month 2002	Internal water-vapor content
	2010.10	   3	XX Month 2002	Internal visual (monolithic)
		   4	XX Month 2002	
		   5	XX Month 2002	
		   6	XX Month 2002	
		 39	XX Month 2002	
		39a	XX Month 2002	
		39b	XX Month 2002	
		 49	XX Month 2002

2003-01-19

MIL-STD-1580B (Rev.B 2003-01-07) Destructive Physical Analysis for Electronic, Electromagnetic, and Electromechanical Parts が無償ダウンロード可能となっています。

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-STD-1580 MIL-STD-1580 全体の情報があります。: http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-1580/std1580.pdf
改訂版(Rev.B)　全体です。
Destructive Physical Analysis for Electronic, Electromagnetic, and Electromechanical Parts File name: std1580.pdf, File size: 7027 kb 119pages; その他、分割ファイルもあります。

2002-12-08

MIL-PRF-38535 (Rev.F 2002-12-01) Integrated Circuits (Microcircuits) Manufacturing, General Specification For FSC 5962 が無償ダウンロード可能となっています。

http://www.dscc.dla.mil/Programs/MilSpec/listdocs.asp?BasicDoc=MIL-PRF-38535 MIL-PRF-38535全体の情報があります。: http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-PRF-38535/prf38535.pdf
改訂版(Rev.F)　全体です。
Integrated Circuits (Microcircuits) Manufacturing, General Specification For Revision: F, Dated: 1 December 2002 File name: prf38535.pdf, File size: 747 kB 151 page; http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-PRF-38535/prf38535f_chg_summary.pdf
今回の主要改定部分の一覧です
This is the summary list of major changes incorporated into Revision F of MIL-PRF-38535. Dated: 1 December 2002 File name: prf38535f_chg_summary.pdf, File size: 12 kB 3 page

2002-11-21

MIL-STD-750D Notice 5 (正式版) Test Method Standard for Semiconductor Devices が無償ダウンロード可能となっています。これは、９月に発行された案(Draft)が吟味され、正式発行されたものです。

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-STD-750 MIL-STD-750 全体の情報があります。: http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-750/std750not5.pdf
今回の変更部分を記述したものです。まず、これをお読みください。
Test Method Standard for Semiconductor Devices (Notice 5 Changes Only)
Dated: 12 November 2002 File name: std750not5.pdf, File size: 969 kb; http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-750/std750not5.pdf
今回の変更を反映させた、750D全体の最新版です。
Test Method Standard for Semiconductor Devices (This Document Incorporates Notice 5 Changes Into the Full Version of MIL-STD-750).
Dated: 15 November 2002 File name: std750not5inc.pdf, File size: 5843 kb; 上記フルバージョンが、大きすぎてダウンロード困難な場合は、 http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-STD-750 に、分割ファイル(1000's,2000's,,,, 数100kB～2MB)がありますので、ご利用ください。

2002-09-02

MIL-STD-750D Notice 5 (Initial Draft) Test Method Standard for Semiconductor Devices が無償ダウンロード可能となっています。

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-STD-750 MIL-STD-750 全体の情報(現行の正式版等も含め)があります。: http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-750/idstd750not5.zip
Test Method Standard for Semiconductor Devices Dated: 19 June 2002 idstd750not5.zip :4.7MB

2002-06-21

MIL-STD-750D Notice 5 (Initial Draft) Test Method Standard for Semiconductor Devices が無償ダウンロード可能となっています。


http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-STD-750 MIL-STD-750 全体の情報(現行の正式版等も含め)があります。: http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-750/idstd750not5.zip
Test Method Standard for Semiconductor Devices Dated: 19 June 2002 idstd750not5.zip :4.7MB

2002-03-28

MIL-HDBK-103 List of Standard Microcircuit Drawings が改訂され、無償ダウンロード可能となりました。

http://www.dscc.dla.mil/Programs/MilSpec/ListDocs.asp?BasicDoc=MIL-HDBK-103 MIL-HDBK-103 の総合情報下記等のファイルが無償ダウンロード可能: http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-HDBK-103/hb103.pdf
MILHDBK-103M:2002-03-18 の一括ダウンロード PDF:3.3MB
分割ファイルもあります。上記総合情報のページ参照; http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-HDBK-103/hb103mdb.zip
一覧表をMS-Access形式のデータベース化したもの(ZIP形式圧縮:600kB)