標準関係情報集ロシア国家標準(GOST R規格)、旧ソ連邦標準(GOST規格)ICS(国際規格分類)コード順一覧(Part 83)

ロシア国家標準、旧ソ連邦標準
(GOST R, GOST規格) ＩＣＳ(国際規格分類)コード順一覧
大分類 83

83	ゴム及びプラスチックエ業
83.020	ゴム及びプラスチックの製造プロセス
83.040	ゴム及びプラスチックの原材料
83.060	ゴム
83.080	プラスチック
83.100	多孔質体
83.120	強化プラスチック注: 複合強化材料→ 59.100
83.140	ゴム及びプラスチック製品注: 成形加工又は押し出し加工製品は、製品の特性によって分類する。注: 伝動ベルト→ 21.220.10 注: コンベヤ・ベルト→ 52.040.20 注: ゴム及びプラスチック被覆織物→ 89.080.40 注: 履物→ 61.060 注: タイヤ→ 83.160
83.160	タイヤ注: タイヤチューブ及びタイヤバルブを含む。
83.180	接着剤注: 粘着テープを含む。注:電気絶縁用粘着テープ→ 29.035.20
83.200	ゴム及びプラスチック工業用設備

手持ちの情報を整理したものであり、規格原本による確認は行っていません。
すべてを網羅しているわけでも、正確さ、最新性を保証するものではありませんので、規格原本などで確認してください。
83.020 ゴム及びプラスチックの製造プロセス

Sort Mk 規格番号規格名称(英語) 国際規格分類
( ICSコードの説明 )

00003-1409 1986 　 GOST 3.1409-86 Unified system for technological documentation. Forms and requirements for filling and arrangement of documents on technological processes(operations)of manufacturing plastic and rubber products 01.110
83.020

00009-049 1991 　 GOST 9.049-91 Unified system of corrosion and ageing protection. Polimer materials and their components. Methods of laboratory tests for mould resistance 19.040
83.020

00009-706 1981 　 GOST 9.706-81 Unified system of corrosion and ageing protection. Polimer materials. Test methods for radiation ageing resistance 19.040
83.020

00009-707 1981 　 GOST 9.707-81 Unified system of corrosion and ageing protection. Polymeric materials. Methods of accelerated climatic ageing test 19.040
83.020

00009-710 1984 　 GOST 9.710-84 Unified system of corrosion and ageing protection. Ageing of polymeric materials. Terms and definitions 01.040.83
83.020

00009-711 　 GOST 9.711-85 [?] 25.220
83.020

00009-715 1986 　 GOST 9.715-86 Unified system of corrosion and ageing protection. Polymeric materials. Test methods for temperature shock resistance 19.040
83.020

00009-716 1991 　 GOST 9.716-91 Unified system of corrosion and ageing protection. Polymeric materials. Methods of determining variation of plasticizer content with ageing 83.020
19.040

00009-717 1991 　 GOST 9.717-91 Unified system of corrosion and ageing protection. Polymeric materials. Method of determining the mass portion of chemically and physically bound water 83.020

00009-718 1993 　 GOST 9.718-93 Unified syitem of corrosion and ageing protection. Polymeric materials. Antioxidant protective efficiency determining method 83.020
19.040

00009-719 1994 　 GOST 9.719-94 Unified system of corrosion and ageing protection. Polymeric materials. Methods of ageing tests under the influence of moist heat, aqueous and salt spray 19.040
83.020

00009-902 1981 　 GOST 9.902-81 Unified system of corrosion and ageing protection. Polymeric materials. Accelerated test methods for corrosivity 83.020
19.040

00012-03-030 1983 　 GOST 12.3.030-83 Occupation safety standards system. Safety requirements. Plastics processing 13.100
83.020

83.040 ゴム及びプラスチックの原材料

Sort Mk 規格番号規格名称(英語) 国際規格分類
( ICSコードの説明 )

00039 　 GOST 39-79 Naphthame-2. Specifications 83.040.20
71.080

00040 　 GOST 40-80 Guanide F. Specifications 83.040.30

00415 1975 　 GOST 415-75 Rubber and rubber mixes. Method for determination of plasticity by means of plastometer 83.040.10

00739 　 GOST 739-74 2-mercaptobenzothiazole. Specifications 83.040.30

00740 　 GOST 740-76 Thiuram D. Specifications 83.040.30

00830 　 GOST 830-75 Aldol-a-naphthylamine. Specifications 83.040.30

05728 1976 　 GOST 5728-76 Three-cresyl phosphate for industrial use. Specifications 83.040.30

07087 　 GOST 7087-75 2,2'-Dibenzothiazol disulphide. Specifications 83.040.30

07885 1986 　 GOST 7885-86 Carbon black for rubber industry. Specifications 83.040.20

08407 1989 　 GOST 8407-89 Reused rubber raw materials. Tyres and inner-tubes. Specifications 83.040.20

08728 1988 　 GOST 8728-88 Plasticizers. Specifications 83.040.30

10201 1975 　 GOST 10201-75 Rubber and rubber compounds. Method for determination of stiffness and elastic recovery by means of defoplastometer 83.040.10

10564 1975 　 GOST 10564-75 Synthetic latex CKC-65 ГП. Specifications 83.040.10

10722 1976 　 GOST 10722-76 Rubber and rubber compounds. Test methods for the determination of viscosity and tendency to scorching 83.040.10

11138 1978 　 GOST 11138-78 Butadienemethylstyrene synthetic rubber CKMC-30APKM-15 and butadiene-styrene rubber CKC-30APKM-15. Specifications 83.040.10

11604 　 GOST 11604-79 Synthetic latex CKД-1C. Specifications 83.040.10

11808 1988 　 GOST 11808-88 Synthetic latex БC-30. Specifications 83.040.10

12535 1984 　 GOST 12535-84 Raw rubber. Method for determination of curing characteristics by curemeter 83.040.20

12812 1980 　 GOST 12812-80 Liquid thiokols. Specifications 83.040.10

13303 1986 　 GOST 13303-86 High molecular polyisobutylene. Specifications 83.040.10

13522 　 GOST 13522-78 Synthetic latex ДMMA-65 ГП. Specifications 83.040.10

13835 1973 　 GOST 13835-73 Low-molecular thermal shock resistant synthetic rubber СКТН. Specifications 83.040.10

14053 1978 　 GOST 14053-78 Synthetic rubber CKC-50 ГПC. Specifications 83.040.10

14888 1978 　 GOST 14888-78 Benzoyl peroxide technical. Specifications 83.040.30

14924 1975 　 GOST 14924-75 Cis-butadiene synthetic rubber CKД. Specifications 83.040.10

14925 1979 　 GOST 14925-79 Cis-isoprene synthetic rubber. Specifications 83.040.10

15080 1977 　 GOST 15080-77 Synthetic latex БC-50. Specifications 83.040.10

15627 1979 　 GOST 15627-79 Synthetic rubbers butadiene-methylstyrene CKMC-30 APK and butadiene-styrene CKC-30 APK. Specifications 83.040.10

15628 1979 　 GOST 15628-79 Synthetic rubbers butadiene methyl styrene CKMC-30APKM-27 and butadiene styrene CKC-30APKM-27. Specifications 83.040.10

18307 1978 　 GOST 18307-78 Soot white. Specifications 83.040.20

18329 1973 　 GOST 18329-73 Liqwid resins and plasticizers. Methods for determination of density 83.040.30

18376 　 GOST 18376-79 Fluoroelastomers CKФ-26 and CKФ-32. Specifications 83.040.10

18522 1973 　 GOST 18522-73 Liquid resins and plasticizers. Methods for determination of the colourity 83.040.30

18522 1993 　 GOST 18522-93 Liquid resins and plasticizers. Methods for determination of colour 83.040.30

19338 1990 　 GOST 19338-90 The suntetic rubber. The method for the determination of the mass loss on dryinq 83.040.10

19816-01 1991 　 GOST 19816.1-91 Rubber, raw styrene-butadiene. Soap and organic acid content. Determination 83.040.10

19816-02 1974 　 GOST 19816.2-74 Synthetic rubber. Method for determination of copper, iron and titanium content 83.040.10

19816-03 1989 　 GOST 19816.3-89 Synthetic rubbers. Methods for determination of phenyl-B-naphthylamine (naphtham-2) fraction of total mass 83.040.10

19816-04 1991 　 GOST 19816.4-91 Rubber. Determination of ash 83.040.10
83.060

19816-05 1974 　 GOST 19816.5-74 Synthetic rubber. Method for determination of water fraction of total mass 83.040.10

19920-02 1974 　 GOST 19920.2-74 Stereoregular butadiene synthetic rubbers. Method for determination of microstructure 83.040.10

19920-03 1974 　 GOST 19920.3-74 Stereoregular butadiene synthetic rubbers. Method for determination of solubility 83.040.10
83.060

19920-05 1974 　 GOST 19920.5-74 Stereoregular butadiene synthetic rubbers. Method for determination of copper and iron content 83.040.10

19920-06 1974 　 GOST 19920.6-74 Stereoregular butadiene synthetic rubbers. Method for determination of alcohol-toluene extract mass fraction 83.040.10
83.060

19920-07 1974 　 GOST 19920.7-74 Stereoregular butadiene synthetic rubbers. Method for determination of presence of mechanical inclusions and insoluble polymer impurities 83.040.10

19920-08 1974 　 GOST 19920.8-74 Stereoregular butadiene synthetic rubbers. Method for determination of naphtham-2 mass percentage in oil-black- and oil-extended rubbers 83.040.10
83.060

19920-12 1974 　 GOST 19920.12-74 Stereoregular butadiene synthetic rubbers. Method for determination of agidol-2 mass percentage 83.040.10
83.060

19920-13 1974 　 GOST 19920.13-74 Stereoregular butadiene synthetic rubbers. Method for determination of technical carbon mass percentage 83.040.10
83.060

19920-14 1974 　 GOST 19920.14-74 Stereoregular butadiene synthetic rubbers. Method for determination of glass transition temperature 83.040.10

19920-15 1974 　 GOST 19920.15-74 Stereoregular butadiene synthetic rubbers. Method for determination of crystallizability 83.040.10
83.060

19920-16 1974 　 GOST 19920.16-74 Stereoregular butadiene synthetic rubbers. Method for determination of Mooney viscosity 83.040.10

19920-17 1974 　 GOST 19920.17-74 Stereoregular butadiene synthetic rubbers. Methods for determination of plasticity and stiffness 83.040.10
83.060

19920-18 1974 　 GOST 19920.18-74 Stereoregular butadiene synthetic rubbers. Method for determination of cold flow 83.040.10
83.060

19920-19 1974 　 GOST 19920.19-74 Stereoregular butadiene synthetic rubbers. Methods for determination of millability. Mooney viscosity and scorching qualities of rubber compounds 83.040.10
83.060

19920-20 1974 　 GOST 19920.20-74 Stereoregular butadiene synthetic rubbers. Methods for vulcanizate testing 83.040.10
83.060

20216 1974 　 GOST 20216-74 Latexes. Methods for the determination of surface tension 83.040.10

21353 1975 　 GOST 21353-75 Latex films. Method for determination of tear resistance 83.040.10
83.140.10

22019 1985 　 GOST 22019-85 Synthetic rubbers. Method for determination of free styrene and alpha-methyl styrene 83.040.10

22349 1977 　 GOST 22349-77 Setting casting resins. Preparation of test specimens 83.040.30
83.080

23492 1983 　 GOST 23492-83 Synthetic rubbers, butadien-styrene CKC-30APKПН and butadiene-methylstyrene СKMС-30APKПН. Specifications 83.040.10

24654 1981 　 GOST 24654-81 Synthetic rubbers. Method for determination of bound styrene content and alpha-methylstyrene 83.040.10

24655 1989 　 GOST 24655-89 Synthetic rubbers. Methods for determination of diphenyl-n-phenylendiamine fraction of total mass 83.040.10

24919 1991 　 GOST 24919-91 Rubber. Determination of solvent extract 83.040.10

24920 1981 　 GOST 24920-81 Latexes synthetic. Acceptance rules, sampling and sample preparation 83.040.10

24921 　 GOST 24921-81 Synthetic latexes. Determination of bound styrene content 83.040.10

24922 1981 　 GOST 24922-81 Synthetic latex. Method of rubber detection 83.040.10

24923 　 GOST 24923-81 Latexes. Determination of coagulum content 83.040.10

25210 1982 　 GOST 25210-82 Polyethers and polyesters for polyurethanes. Method of acid value determinations 71.080.60
83.040

25240 1982 　 GOST 25240-82 Polyestheres for polyuretanes. Method of iodin value determination 71.080.60
83.040

25241 1982 　 GOST 25241-82 Polyethere for polyurethanes. Method of pH determination 71.080.60
83.040

25261 1982 　 GOST 25261-82 Polyethers and polyesters for polyurethanes. Method of hydroxyl value determination 71.080.70
83.040

25523 1982 　 GOST 25523-82 Epoxy anhydride hardeners. Methods for determination of total acid number of acid and their relation 83.040.30

25699-01 1990 　 GOST 25699.1-90 Rubber compounding ingredients. Carbon black shipment sampling procedures 83.040.20

25699-02 1990 　 GOST 25699.2-90 Black carbon for rubber industry. Methods for determination of surface area by CTAB adsorption 83.040.20

25699-03 1990 　 GOST 25699.3-90 Rubber compounding ingredients. Carbon black. Determination of iodine adsorption number. Titrimetric method 83.040.20

25699-04 1990 　 GOST 25699.4-90 Carbon black for rubber industry. Method for determination of specific surface area by inert gas adsorption 83.040.20

25699-05 1990 　 GOST 25699.5-90 Carbon black for rubber industry. Method for determination of dibutylphtalate absorption 83.040.20

25699-06 1990 　 GOST 25699.6-90 Carbon black for rubber industry. Methods for determination of pH value 83.040.20

25699-07 1990 　 GOST 25699.7-90 Rubber compounding ingredients. Carbon black. Determination of loss on heating 83.040.20

25699-08 1990 　 GOST 25699.8-90 Carbon black for rubber industry. Method for determination of ash 83.040.20

25699-09 1990 　 GOST 25699.9-90 Carbon black for rubber industry. Method for determination of total sulfur content 83.040.20

25699-10 1990 　 GOST 25699.10-90 Carbon black for rubber industry. Method for determination of sieve residue at 0045 mm, 05 mm and 014 mm 83.040.20

25699-10 1993 　 GOST 25699.10-93 Rubber compounding ingredients. Carbon black. Determination of sieve residue 83.040.20

25699-13 1990 　 GOST 25699.13-90 Carbon black for rubber industry. Method for determination of fines content in pelleted carbon 83.040.20

25699-14 1993 　 GOST 25699.14-93 Rubber compounding ingredients. Carbon black (pelletized). Determination of pour density 83.040.20

25699-15 1990 　 GOST 25699.15-90 Carbon black for rubber industry. Method for determination of light transmittance of toluene exstract 83.040.20

25699-16 1990 　 GOST 25699.16-90 Carbon black for rubber industry. Method for determination of individual pellet crushing strenght 83.040.20

25709 1983 　 GOST 25709-83 Synthetic latex. Method for the determination of solids 83.040.10

27109 1986 　 GOST 27109-86 Synthetic rubbers. The methods of sampling and sample preparation 83.040.10

28568 1990 　 GOST 28568-90 Synthetic rubbers. Determination of ionol - the phenol-type stabilizer content 83.040.10

28643 1990 　 GOST 28643-90 Rubber latex. Determination of coagulum content (sieve residue) 83.040.10

28647 1990 　 GOST 28647-90 Rubber, raw and rubber latex. Determination of iron content. 1,10 phenanthroline photometric method 83.040.10

28655 1990 　 GOST 28655-90 Rubber latexes. Determination of pH 83.040.10

28857 1990 　 GOST 28857-90 Natural rubber latex concentrate. Determination of sludge content 83.040.10

28858 1990 　 GOST 28858-90 Rubber and rubber latexes. Determination of manganese content. Sodium periodate photometric methods 83.040.10
83.060

28859 1990 　 GOST 28859-90 Natural rubber latex concentrate. Determination of volatile fatty acid number 83.040.10

28860 1990 　 GOST 28860-90 Rubber and latices. Nomenclature 83.040.10

28861 1990 　 GOST 28861-90 Natural rubber latex concentrate. Determination of boric acid content 83.040.10

28862 1990 　 GOST 28862-90 Rubber latices. Determination of total solids content 83.040.10

28863 1990 　 GOST 28863-90 Natural rubber latex concentrate. Determination of alkalinity 83.040.10

28864 1990 　 GOST 28864-90 Natural rubber latex. Determination of KON number 83.040.10

29079 1991 　 GOST 29079-91 Natural rubber latex concentrate. Determination of mechanical stability 83.040.10

29080 1991 　 GOST 29080-91 Natural rubber latex concetrate. Determination of dry rubber content 83.040.10

29081 1991 　 GOST 29081-91 Natural rubber latex concentrate, centrifuged or creamed ammonia-preserved types. Specifications 83.040.10

29082 1991 　 GOST 29082-91 Natural rubber latex concentrate evaporated, preserved. Specification 83.040.10

29083 1991 　 GOST 29083-91 Rubber and latex. Determination of copper content. Photometric method 83.040.10
83.060

50096 1992 　 GOST R 50096-92 Plastics. Hardeners and accelerators for epoxide resins. Part 1. Designation 01.075
83.040.30

50157 1992 　 GOST R 50157-92 Rubber compounding ingredients. Carbon black (pelletized). Determination of pour density 83.040.20

50354 1992 　 GOST R 50354-92 Rubber compounding ingredients. Carbon blask. Determination of sieve residue 83.040.20

50407 1992 　 GOST R 50407-92 Liquid resins and plasticizers. Method for determination of colourity 83.040.30

52367 　 GOST R 52367-2005 Cis-isoprene synthetic rubber. Specifications 83.040

ISO 00248 1996 　 GOST ISO 248-96 Rubber. Determination of volatilematter content 83.040.10

ISO 00705 2003 　 GOST R ISO 705-2003 Rubber latex. Determination of density between 5 deg. C and 40 deg. C 83.040.10

ISO 01652 1993 　 GOST R ISO 1652-93 Rubber latex. Determination of viscosity 83.040.10

ISO 01795 1996 　 GOST ISO 1795-96 Rubber, raw, natural and synthetic. Sampling and further preparative procedures 83.040.10

ISO 02303 2003 　 GOST R ISO 2303-2003 Isoprene rubber (IR). Nоn-oil-extended, solution-polymerized types. Evaluation procedure 83.040.10

ISO 07323 1996 　 GOST ISO 7323-96 Rubber raw and unvulcanized compounded. Determination of plasticity number and recovery number. Parallel plate method 83.040.10
83.060

83.060 ゴム

Sort Mk 規格番号規格名称(英語) 国際規格分類
( ICSコードの説明 )

00004-387 1985 　 GOST 4.387-85 Product-quality index system. Synthetic materials for food-gear bottom. Index nomenclature 03.120
83.060
61.060

00009-024 1974 　 GOST 9.024-74 Unified system of corrosion and ageing protection. Rubbers. Methods of heat ageing stability determination 83.060
19.040

00009-026 1974 　 GOST 9.026-74 Unified system of corrosion and ageing protection. Vulcanized rubber. Method of accelerated determination to ozone resistance 83.060
19.040

00009-029 1974 　 GOST 9.029-74 Unified system of corrosion and ageing protection. Vulcanized rubbers. Method of testing of resistance to ageing under static deformation of compression 83.060
19.040
19.060

00009-030 1974 　 GOST 9.030-74 Unified system of corrosion and ageing protection. Vulcanized rubber. Method of testing resistance to attack by corrosive media in limp state 83.060
19.040

00009-061 1975 　 GOST 9.061-75 Unified system of corrosion and ageing protection Rubbers. Accelerated test method for resistance to attack by liquid corrosive media during rotation under frictional condition 83.060
19.040

00009-065 1976 　 GOST 9.065-76 Unified system of corrosion and ageing protection. Rubbers. Test method for liquid corrosive media resistance at the constant tensile stress 83.060
19.040

00009-066 1976 　 GOST 9.066-76 Unified system of corrosion and ageing protection. Vulcanized rubbers. Method of ageing resistance testing under weather conditions 83.060
19.040

00009-067 1976 　 GOST 9.067-76 Unified system of corrosion and ageing protection. Vulcanized rubbers for articles operating under conditions of thermal and lightozone ageing. Techical requirements 25.220
83.060

00009-070 1976 　 GOST 9.070-76 Unified system of corrosion and ageing protection. Vulcanized rubbers. Test methods for resistance to attack by liquid corrosive media at static compressive strain 83.060
19.040

00009-071 1976 　 GOST 9.071-76 Unified system of corrosion and ageing protection. Vulcanized rubbers for articles working in liquid corrosive media. Technical requirements 25.220
83.060

00009-701 1979 　 GOST 9.701-79 Unified system of corrosion and ageing protection. Vulcanized rubbers. Test method for radiation ageing resistance 19.040
83.060

00009-704 1980 　 GOST 9.704-80 Unified system of corrosion and ageing protection. Vulcanized rubbers. Methods of determination of the packing parts for the fixed joints working capacity during the radiation-thermal ageing 83.060
19.040

00009-709 1983 　 GOST 9.709-83 Unified system of corrosion and ageing protection. Cellular rubbers. Accelerated test method for thermal ageing resistance 19.040
83.060

00009-713 1986 　 GOST 9.713-86 Unified system of corrosion and ageing protection. Vulcanized rubbers. Method of predicting the change of properties buring heat ageing 19.040
83.060

00012-04-083 1980 　 GOST 12.4.083-80 Occupational safety standards system. Special shoes soles. Method of determination of sliding friction factor 13.340.50
83.060

00209 1975 　 GOST 209-75 Rubber and glue. Methods of determination of metal bond strength at tearing 83.060
83.180

00210 1975 　 GOST 210-75 Rubber. Method for the determination of elasticity modulus at extension 83.060

00211 1975 　 GOST 211-75 Ebonite. Method for determination of shear strength 83.060

00252 1975 　 GOST 252-75 Rubber. Method of test for relative hysteresis and useful elasticity by elongation 83.060

00255 1990 　 GOST 255-90 Ebonite. Determination of cross-breaking strength 83.060

00258 1975 　 GOST 258-75 Ebonite. Method for fragility determination on pendulum pile-driver 83.060

00260 1975 　 GOST 260-75 Rubber. Method for determination of resilience of the lacquer film on rubber surface 83.060

00261 1979 　 GOST 261-79 Rubber. Methods of determination fatigue life for repeated stretching 83.060

00262 1979 　 GOST 262-79 Rubber. Method for the determination of tear resistance 83.060

00262 1993 　 GOST 262-93 Rubber, vulcanized. Determination of tear strength (throuser, angle and crescent test pieces) 83.060

00263 1975 　 GOST 263-75 Rubber. Method for the determination of Shore A hardness 83.060

00265 1977 　 GOST 265-77 Rubber. Methods of short static compression tests 83.060

00267 1973 　 GOST 267-73 Rubber. Methods for the determination of density 83.060

00269 1966 　 GOST 269-66 Rubber. General requirements for the physical mechanical tests 83.060

00270 1975 　 GOST 270-75 Rubber. Method of the determination elastic and tensile stress-strain properties 83.060

00408 1978 　 GOST 408-78 Rubber. Methods of measuring low temperature resistance at extension 83.060

00409 1977 　 GOST 409-77 Plastics cellular and rubber cellular. Method for determination of apparent density 83.100
83.060

00411 1977 　 GOST 411-77 Rubber and glue. Methods for determination of metal bond strength at separation 83.060
83.180

00412 1976 　 GOST 412-76 Rubber mixtures. Method for the determination of the ring modulus 83.060

00422 1975 　 GOST 422-75 Rubber for shoes bottom. Methods of tests for repeated flexing 83.060
61.060

00426 1977 　 GOST 426-77 Rubber. Method for the determination of abrasion resistance under slipping 83.060

02631 1979 　 GOST 2631-79 Materials for retreading and repairing pneumatic tyres. Specifications 83.060
83.180

02891 1978 　 GOST 2891-78 Rubber for shoes bottom. Method for determination of pulling out pin resistance 83.060
61.060

02892 1982 　 GOST 2892-82 Rubber for shoes bottom. Method for determination of break resistance 83.060
61.060

05170 1973 　 GOST 5170-73 Repair kits for pneumatic tyres. Specifications 83.060
83.180

06768 1975 　 GOST 6768-75 Rubber and rubberized fabric. Method for determination of the bond strength at ply separation 83.060
59.080.30

07912 1974 　 GOST 7912-74 Rubber. The method for the determination of brittle temperature 83.060

07926 1975 　 GOST 7926-75 Rubber for shoes bottom. The methods of testing 83.060
61.060

09982 1976 　 GOST 9982-76 Rubber. Determination of stress relaxation in compression 83.060

09983 1974 　 GOST 9983-74 Rubber. Methods of tests for repeated flexing of the pieces with a straight groove 83.060

10269 1975 　 GOST 10269-75 Rubber. Method of test resistance to ageing by measurement of creep 83.060

10828 1975 　 GOST 10828-75 Rubber. Method for the determination of dynamic modulus and internal friction modulus under variable sing flexure with rotation 83.060

10952 1975 　 GOST 10952-75 Rubber. Methods for determination of fatigue life under variable sign flexure with rotation 83.060

11053 1975 　 GOST 11053-75 Rubber. Determination method of quasi-equilibrium modulus 83.060

11721 1978 　 GOST 11721-78 Cellular rubber. Method for determination of elastic and tensile stress-strain properties 83.060

11722 1978 　 GOST 11722-78 Cellular rubber. Method for determination of compression set 83.060

12021 1984 　 GOST 12021-84 Plastics and ebonite. Method of determination of deflection under load temperature 83.080
83.060

12251 1977 　 GOST 12251-77 Rubber. Method for the determination of abrasion resistance under rolling with slipping 83.060

12967 1967 　 GOST 12967-67 Cellular rubber. Method for the determination of cold-resistance coefficient 83.060

13270 1985 　 GOST 13270-85 Vulcanized rubber. Method for determination of cristallization ability in compression 83.060

13662 1977 　 GOST 13662-77 Rubber for shoes bottom. Method for determination of heat resistance 83.060
61.060

13808 1979 　 GOST 13808-79 Rubber. Method for the determination of low temperature resistance according to elastic rebound after compression 83.060

14645 1969 　 GOST 14645-69 Rubber compounds for sponge products. Method for determination of volume expansion 83.060

14863 1969 　 GOST 14863-69 Rubber. Method for determination of rubber to cord adhesion 83.060

17443 1980 　 GOST 17443-80 Rubber. Method for determination fatique life bond of rubber to cord under repeated extention-compression 83.060

19816-04 1991 　 GOST 19816.4-91 Rubber. Determination of ash 83.040.10
83.060

19920-03 1974 　 GOST 19920.3-74 Stereoregular butadiene synthetic rubbers. Method for determination of solubility 83.040.10
83.060

19920-06 1974 　 GOST 19920.6-74 Stereoregular butadiene synthetic rubbers. Method for determination of alcohol-toluene extract mass fraction 83.040.10
83.060

19920-08 1974 　 GOST 19920.8-74 Stereoregular butadiene synthetic rubbers. Method for determination of naphtham-2 mass percentage in oil-black- and oil-extended rubbers 83.040.10
83.060

19920-12 1974 　 GOST 19920.12-74 Stereoregular butadiene synthetic rubbers. Method for determination of agidol-2 mass percentage 83.040.10
83.060

19920-13 1974 　 GOST 19920.13-74 Stereoregular butadiene synthetic rubbers. Method for determination of technical carbon mass percentage 83.040.10
83.060

19920-15 1974 　 GOST 19920.15-74 Stereoregular butadiene synthetic rubbers. Method for determination of crystallizability 83.040.10
83.060

19920-17 1974 　 GOST 19920.17-74 Stereoregular butadiene synthetic rubbers. Methods for determination of plasticity and stiffness 83.040.10
83.060

19920-18 1974 　 GOST 19920.18-74 Stereoregular butadiene synthetic rubbers. Method for determination of cold flow 83.040.10
83.060

19920-19 1974 　 GOST 19920.19-74 Stereoregular butadiene synthetic rubbers. Methods for determination of millability. Mooney viscosity and scorching qualities of rubber compounds 83.040.10
83.060

19920-20 1974 　 GOST 19920.20-74 Stereoregular butadiene synthetic rubbers. Methods for vulcanizate testing 83.040.10
83.060

20014 1983 　 GOST 20014-83 Cellular rubbers. Methods for determination of compression resistance 83.060

20403 1975 　 GOST 20403-75 Rubber. Method for determination hardness in international units (30 to 100 IRHD) 83.060

20418 1975 　 GOST 20418-75 Rubber. Methods for the determination of heat generation compression set and fatigue life for repeated compression 83.060

21751 1976 　 GOST 21751-76 Sealants. Determination method of tensile strength, ultimate elongation at break and deformation set after break 83.060

21980 1976 　 GOST 21980-76 Gas centrifugal burners with tangential iniet basic indexes nomenclature and methods of computation 43.060
83.060
27.060.20

21981 1976 　 GOST 21981-76 Sealants. Determination method of bond strength with metal at peeling 83.060

23016 1978 　 GOST 23016-78 Rubber. Method for the determination of the tear resistance on test strips 83.060

23020 1978 　 GOST 23020-78 Rubber. Method for determination of failure work at extension 83.060

23326 1978 　 GOST 23326-78 Rubber. Methods of dynamic tests. General requirements 83.060

23509 1979 　 GOST 23509-79 Rubber. Method for the determination of abrasion resistance under slipping an a renewing surface 83.060

24576 1981 　 GOST 24576-81 Rubber. Identification of antioxidants by thin-layer chromatography 83.060

24841 1981 　 GOST 24841-81 Hard rubber. General requirements for the physical mechanical tests 83.060

24974 1981 　 GOST 24974-81 Rubber. Pyrolysis gas chromatography method for polymer identification 83.060

25899 1983 　 GOST 25899-83 Shoe sole materials. Marking, packing, transportation, storage 83.060
61.060

26365 1984 　 GOST 26365-84 Rubber. General requirements for fatigue test methods 83.060

26554 1985 　 GOST 26554-85 Rubber. Methods of sulfur content determination 83.060

26555 1985 　 GOST 26555-85 Rubber. Methods of carbon black content determination 83.060

27110 1986 　 GOST 27110-86 Method of determination rebound elasticity on a machine of the Shob type 83.060

27356 1987 　 GOST 27356-87 Synthetic materials for low soling. Method of determination of hardnees under static beuding 83.060
61.060

27420 1987 　 GOST 27420-87 Synthetic materials for low shoe bottom parts. The method for determination of dynamic low temperature resistance 83.060
61.060

27896 1988 　 GOST 27896-88 Rubbers, polimer elastie materials, rubberized and elastie polimer coated fabries. Methods for determination of fuel permeability 83.060
59.080.30
59.080.40

28588-01 1990 　 GOST 28588.1-90 Rubber, vulcanized. Preparation of samples and test pieces. Part 1. Physical tests 83.060

28588-02 1990 　 GOST 28588.2-90 Rubber, vulcanized. Preparation of samples and test pieces. Part 2. Chemical tests 83.060

28614 1990 　 GOST 28614-90 Rubber. Identification of polyimers (single polymers and blends). Pyrolytic gas chromatographic method 83.060

28619 1990 　 GOST 28619-90 Rubber. Determination of carbon black. Pyrolytic and chemical degradation methods 83.060

28621 1990 　 GOST 28621-90 Rubber and rubber products. Guide to the identification of antidegradants. Thin layer chromatographic methods 83.060
83.140

28644 1990 　 GOST 28644-90 Rubber. Determination of total sulfur content. Part 1. Oxygen combustion flask method 83.060

28645 1990 　 GOST 28645-90 Rubber. Determination of total sulfur content. Part 3. Furnace combustion method 83.060

28659 1990 　 GOST 28659-90 Rubber products. Determination of zink content. EDTA titrimetric method 83.060

28665 1990 　 GOST 28665-90 Rubber. Identification. Infra-red spectrometric method 83.060

28810 1990 　 GOST 28810-90 Rubber vulcanized. Determination of modulus in shear. Quadruple shear method 83.060

28858 1990 　 GOST 28858-90 Rubber and rubber latexes. Determination of manganese content. Sodium periodate photometric methods 83.040.10
83.060

29007 1991 　 GOST 29007-91 Rubber. Method for defermination of adhesion elements in the chamber of pneumatic tyres 83.060

29083 1991 　 GOST 29083-91 Rubber and latex. Determination of copper content. Photometric method 83.040.10
83.060

30263 1996 　 GOST 30263-96 Rubber test mixes. Preparation, mixing and vulcanization. Equipment and procedures 83.060

50359 1992 　 GOST R 50359-92 Rubber, vulcanized. Determination of tear strength (throuser, angle and crescent test pieces) 83.060

ISO 07323 1996 　 GOST ISO 7323-96 Rubber raw and unvulcanized compounded. Determination of plasticity number and recovery number. Parallel plate method 83.040.10
83.060

83.080 プラスチック

Sort Mk 規格番号規格名称(英語) 国際規格分類
( ICSコードの説明 )

00009-703 1979 　 GOST 9.703-79 Unified system of corrosion and ageing protection. Plastic materials for items, used in tropical conditions. General requirements for selection and test methods 83.080
19.040

00009-708 1983 　 GOST 9.708-83 Unified system of corrosion and ageing protection. Plastics. Ageing test methods on exposure to natural and artificial climatic factors 19.040
83.080

04559 1978 　 GOST 4559-78 Liquid bakelite. Specification 83.080.10

04647 1980 　 GOST 4647-80 Plastics. Method for determination of Charpy's impact strength 83.080.01

04648 1971 　 GOST 4648-71 Plastics. Method of static bending test 83.080

04650 1980 　 GOST 4650-80 Plastics. Methods for the determination of water absorption 83.080

04651 1982 　 GOST 4651-82 Plastics. Compression test method 83.080

04670 1991 　 GOST 4670-91 Plastics. Determination of hardness. Ball indentation method 83.080

05689 1979 　 GOST 5689-79 Phenolic moulding compound. Specifications 83.080.10

05960 1972 　 GOST 5960-72 Flexible PVC for insulation and protective jackets of wires and cables. Specifications 83.080.20

07850 1986 　 GOST 7850-86 Caprolactam. Specifications 83.080.10

09359 1980 　 GOST 9359-80 Urea-formaldehyde and melamine-formaldehyide moulding materials (aminoplasts). Specifications 83.080.10

09439 1985 　 GOST 9439-85 Polyvinylbutyral. Specifications 83.080.20

09550 1981 　 GOST 9550-81 Plastics. Test methods for the determination of elasticity modulus at strength, compression and bending 83.080

10007 1980 　 GOST 10007-80 Ftuoroplast-4. Specifications 83.080.20

10456 1980 　 GOST 10456-80 Plastics. Method for determination of incandescence resistance 83.080

10589 1987 　 GOST 10589-87 Moulding polyamide 610. Specification 83.080.10

11012 1969 　 GOST 11012-69 Plastics. Methods of test for resistance to abrasion 83.080

11034 1982 　 GOST 11034-82 Polyamides. Method for determination of the viscosity number of dilute solution 83.080.10

11035 1964 　 GOST 11035-64 Plastics. Methods for the determination of apparent density of moulding material that can be and cannot be poured from a specified funnel 83.080

11035-01 1993 　 GOST 11035.1-93 Plastics. Determinations of apparent density of moulding materials that can be poured from a specified funnel 83.080

11035-02 1993 　 GOST 11035.2-93 Plastics. Determination of apparent density of moulding material that cannot be poured from a specified funnel 83.080

11233 1965 　 GOST 11233-65 Plastics. Methods for the determination of free ammonia content and ammonium compounds 83.080.10

11234 1991 　 GOST 11234-91 Plastics. Determination of bulk factor of moulding materials 83.080.10

11235 1975 　 GOST 11235-75 Phenolformaldehyde resins. Methods for determination of free phenol 83.080.10

11262 1980 　 GOST 11262-80 Plastics. Tensile strength test method 83.080

11629 1975 　 GOST 11629-75 Plastics. Method of test for coefficient of friction 83.080

11645 1973 　 GOST 11645-73 Plastics. Determination of flow index of thermoplastics melt by extrusion plastometer 83.080

11736 1978 　 GOST 11736-78 Plastics. Method for determination of water content 83.080

11772 1973 　 GOST 11772-73 Dispersions of polimers and copolimers, aqueous. Microphotographic method for the determination of particles size 83.080

12015 1966 　 GOST 12015-66 Plastics. Preparation of test specimens from thermosetts. General requirements 83.080.10

12019 1966 　 GOST 12019-66 Plastics. Preparation of test speciments from thermoplastics. General requirements 83.080.20

12020 1972 　 GOST 12020-72 Plastics. Testing methods of plastics resistance to chemical substances 83.080

12021 1984 　 GOST 12021-84 Plastics and ebonite. Method of determination of deflection under load temperature 83.080
83.060

12099 　 GOST 12099-75 Copolymer BA-15 vinyl chloride and vinyl acetate. Specifications 83.080.20

12271 　 GOST 12271-76 The copolymers of styrene. Specifications 83.080.20

12423 1966 　 GOST 12423-66 Plastics. Standard atmospheres for conditioning of test specimens 83.080

13518 1968 　 GOST 13518-68 Plastics. Method for determination of environmental stress-cracking resistance of polyethylene 83.080.20

13537 1968 　 GOST 13537-68 Plastics. Method for determination of splitting resistance 83.080

13549 1978 　 GOST 13549-78 Unsaturated polyester resins. Methods for determination of styrene content 83.080.10

13744 1987 　 GOST 13744-87 Fluoroplast-3. Specifications 83.080.20

14039 1978 　 GOST 14039-78 Emulsion polyvinylchloride. Specifications 83.080.20

14040 1982 　 GOST 14040-82 Polyvinylchloride and vinylchloride copolymers. Method for determination of viscosity number and K-value 83.080.20

14041 1991 　 GOST 14041-91 Plastics. Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products of elevated temperatures. Congo red method 83.080.20

14043 1978 　 GOST 14043-78 Polyvinylchloride and vinylchloride copolymers. Method for determination of moisture and volatile matters content 83.080.20

14231 1978 　 GOST 14231-78 Urea-formaldehyde resins. Specifications 83.080.10

14231 1988 　 GOST 14231-88 Urea-formaldehyde resins. Specifications 83.080.10

14332 1978 　 GOST 14332-78 Suspension polyvinylchloride. Specifications 83.080.20

14359 1969 　 GOST 14359-69 Plastics. Testing methods. General requirements of the methods of mechanical testing 83.080

14361 1978 　 GOST 14361-78 Oil ФM-5,6 AП for refrigerating machines. Specifications 71.100
83.080.10

14906 1977 　 GOST 14906-77 Fluoroplastic-4D. Specifications 83.080.20

14926 1981 　 GOST 14926-81 Plastics. Method for determination of plasticizers migration 83.080

15088 1983 　 GOST 15088-83 Plastics. Method of determination of the Vicat softening temperature of thermoplastics 83.080.20

15139 1969 　 GOST 15139-69 Plastics. Methods for the determination of density (mass density) 83.080

15173 1970 　 GOST 15173-70 Plastics. Method for determination of mean coefficient of linear thermal expansion 83.080

15820 1982 　 GOST 15820-82 Polystyrole and copolymers of styrole. Gas chromatographic method for determination of resictual monomers and non-polymerizing impurities 83.080.20

15866 1970 　 GOST 15866-70 Organo-silicone fluid ПФMC-4. Specifications 71.100.55
83.080.10

15874 1981 　 GOST 15874-81 Polyvinylacetals. Methods for determination of acetal and acetate groups 83.080.20

15875 1980 　 GOST 15875-80 Plastics. Methods for the determination of transmittance coefficient and turbidity 83.080

15882 1984 　 GOST 15882-84 Plastics. Method of measuring elastic-viscous characteristics and curing kinetics of thermosets 83.080.10

15973 1982 　 GOST 15973-82 Plastics. Methods for determination of ash 83.080

16185 1982 　 GOST 16185-82 Plastics. Method for determining of electrostatic properties 83.080

16336 1977 　 GOST 16336-77 Polyethylene compositions for cable industry. Specifications 83.080.20

16337 1977 　 GOST 16337-77 High-pressure polyethylene. Specifications 83.080.20

16338 1985 　 GOST 16338-85 Low-pressure polyethylene. Specifications 83.080.20

16388 1970 　 GOST 16388-70 Phenol-formaldehyde resins. Method for determination of drop temperature 83.080.10

16704 1971 　 GOST 16704-71 Phenol-formaldehyde resins. Methods for determination of free formaldehyde content 83.080.10

16782 1992 　 GOST 16782-92 Plastics. Determination of the brittleness temperature by impact 83.080

16783 1971 　 GOST 16783-71 Plastics. Method of determining the brittleness temperature at squeezing the specimen folded up as a loop 83.080

17291 1971 　 GOST 17291-71 Nitrocellulose. Method for determination of mass fraction of residual spirit 83.080.20

17302 1971 　 GOST 17302-71 Plastics. Method of test for shear strength 83.080

17555 1972 　 GOST 17555-72 Plastics. Methods for determination of hydroxyl group of epoxy resins and epoxidized compositions 83.080.10

17648 1983 　 GOST 17648-83 Glass filled polyamides. Specifications 83.080.20

17730 1979 　 GOST 17730-79 Fibrous moulding compound П-5-12. Specifications 83.080.10

17731 1979 　 GOST 17731-79 Compound П-5-7 ЛДП. Specifications 83.080.10

18197 1982 　 GOST 18197-82 Method of test for tensile creep of plastics 83.080

18249 1972 　 GOST 18249-72 Plastics. Method for viscosity determination of diluted polymer solution 83.080.01

18268 1972 　 GOST 18268-72 Flexible cellular plastics. Method of test for spesific compression set 83.080.01

18616 1980 　 GOST 18616-80 Plastics. Method of determination of shrinkage 83.080

18694 1980 　 GOST 18694-80 Hard phenolformaldehyde resins. Specifications 83.080.10

18992 1980 　 GOST 18992-80 Polyvinylacetate homopolymeric coarse breakup dispersion. Specifications 83.080.20

19109 1984 　 GOST 19109-84 Plastics. Method for determination of Izod impact strength 83.080

19459 1987 　 GOST 19459-87 Injection moulding polyamide copolymers. Specifications 83.080.10

19478 1974 　 GOST 19478-74 Polyvinyl chloride plastikate for telephone cord insulation and shell. Specifications 83.080.20

19599 1990 　 GOST 19599-90 Plastics. Polyamides. Accelerated conditioning of test specimens 83.080.20

19679 1974 　 GOST 19679-74 Plastics. Preparation of injection moulded and compression moulded specimens for optical testing of thermoplastics 83.080.20

19873 1974 　 GOST 19873-74 Plastics. Resonance method of determining dynamic elastic modulus and coefficients of mechanical losses at vibrations of the sample fixed from one side 83.080

19927 1974 　 GOST 19927-74 Plastics. Methods for determination of refraction coefficient 83.080

20214 1974 　 GOST 20214-74 Electrical conductive plastics. Test method for determination of specific volume electrical resistance at d.c. voltage 83.080

20282 1986 　 GOST 20282-86 General-purpose polystyrene. Specifications 83.080.20

20437 1989 　 GOST 20437-89 Moulding material AГ-4. Specifications 83.080.10

20812 1983 　 GOST 20812-83 Plastics. Testing of plastics with the torsion pendulum 83.080

20870 1975 　 GOST 20870-75 Rigid cellular plastics. Method for the determination of water - vapour permeability 83.080.01

20907 1975 　 GOST 20907-75 Liquid phenolformaldehyde resins. Specifications 83.080.10

21207 1981 　 GOST 21207-81 Plastics. Method for determination of flammability 83.080

21228 1985 　 GOST 21228-85 Celluloid. Specifications 83.080.20

21341 1975 　 GOST 21341-75 Plastics and ebonite. Method of determining the Martens heat resistance temperature 83.080

21553 1976 　 GOST 21553-76 Plastics. Methods for determination of melting temperature 83.080

21793 1976 　 GOST 21793-76 Plastics. Method for determination of the oxygen index 83.080

21970 1976 　 GOST 21970-76 Unsaturated polyester resins. Methods for determination of the maximum temperature during the setting 83.080.10

22181 1991 　 GOST 22181-91 Unsaturated polyester resins. Methods for determination of gel time 83.080.10

22234 1976 　 GOST 22234-76 Polyester 24K. Specifications 83.080.20
71.080.60

22304 1977 　 GOST 22304-77 Unsaturated polyester resins. Methods for determination of asid value 83.080.10

22349 1977 　 GOST 22349-77 Setting casting resins. Preparation of test specimens 83.040.30
83.080

22456 1977 　 GOST 22456-77 Plastics. The method for determination of nonvolatile and volatile contents in epoxy resins and epoxy compositions 83.080.10

22457 1990 　 GOST 22457-90 Epoxy resins. Method for determination of mass percentage of chlorine 83.080.10

22648 1977 　 GOST 22648-77 Plastics. Methods for determination of hygienic characteristics 83.080

23460 1979 　 GOST 23460-79 Plastics. The dynamic method of technique properties determination of slowly curring thermoseftings with high content of filler 83.080.10

23553 1979 　 GOST 23553-79 Plastics. Manometer method for determination of gas permeability 83.080

23630-01 1979 　 GOST 23630.1-79 Plastics. Method for the determination of thermal capacity 83.080

23630-02 1979 　 GOST 23630.2-79 Plastics. Method for the determination of thermal conductivity 83.080

24621 1991 　 GOST 24621-91 Plastics and ebonits. Determination of indentation hardness by means of a durometer (Shore hardness) 83.080

24622 1991 　 GOST 24622-91 Plastics. Determination of hardness. Rockwell hardness 83.080

24632 1981 　 GOST 24632-81 Materials polimer. Method for determination of smoke develepment 83.080

24778 1981 　 GOST 24778-81 Plastics. Methods for shear strength determination in plane of the sheet 83.080

24888 1981 　 GOST 24888-81 Plastics, polymers and synthetic resins. Chemical names, terms and definitions 01.040.83
83.080

24947 1981 　 GOST 24947-81 Polyvinylchloride. Method for determination of the content of substances extracted with methanol or ethyl ether 83.080.20

25055 1987 　 GOST 25055-87 Polyamides. Monometrical method for water determination 83.080.10

25138 1993 　 GOST 25138-93 Plastics. Polyvinyl chloride resins. Determination of number of impurities and foreign particles 83.080.20

25139 1993 　 GOST 25139-93 Plastics. Determination of pourability 83.080

25265 1991 　 GOST 25265-91 Plastics. PVC resins for general use. Determination of plasticizer absorption at room temperature 83.080.20

25271 1993 　 GOST 25271-93 Plastics. Resins in the liquid state or as emulsions or dispersions. Determination of apparent viscosity by the Brookfield method 83.080

25276 1982 　 GOST 25276-82 Polymers. Method for determination of viscosity by rotary viscosimeter at a given shear rate 83.080

25303 1992 　 GOST 25303-92 Plastics. Vinyl chloride homopolymers and copolymers. Determination of chlorine 83.080.20

25428 　 GOST 25428-82 Fluoroplast-42. Specifications 83.080.20

25645-321 1987 　 GOST 25645.321-87 Polymeric materials radiation resistance. Terms and definitions 01.040.83
83.080

25645-323 1988 　 GOST 25645.323-88 Polyimeric materials. Methods of radiation tests 83.080

25645-331 1991 　 GOST 25645.331-91 Polymeric materials. Standards for radiation resistance estimations 83.080

25645-332 1994 　 GOST R 25645.332-94 Polimeric materials for spacecrafts with nuсlear reactor. Requiremens to radiation tests 83.080
49.025.40

25645-338 1996 　 GOST R 25645.338-96 Polymeric materials for space technique. Requirements for ultraviolet radiation stability tests 83.080
49.025.40

25737 1991 　 GOST 25737-91 Plastics. Homopolymer and copolymer resins of vinyl chloride. Determination of residual vinyl chloride monomer. Gasochromatographic method 83.080.20

25910 1983 　 GOST 25910-83 Polystyrene. Designation 01.075
83.080.20

26277 1984 　 GOST 26277-84 Plastics. Preparation of test specimens by machining 83.080

26310 1984 　 GOST 26310-84 Polyethylene. Method for determination of black and pigment particles distribution 83.080.20

26311 1984 　 GOST 26311-84 Polyolefins. Methods of determination of black content 83.080.20

26359 1984 　 GOST 26359-84 Polyethylene. Method for determination of volatile matters content 83.080.20

26393 1984 　 GOST 26393-84 Polyethylene. Method for determination of extractable substances content by diethyl ether 83.080.20

26580 1985 　 GOST 26580-85 Shoe sole synthetic materials. Acceptance rules 83.080
61.060

26743-01 1991 　 GOST 26743.1-91 Caprolactam for industrial use. Determination of colour of 50% aqueous caprolactam solution expressed in Hazen units (platinum-cobalt scale). Spectrometric method 83.080.10

26743-02 1991 　 GOST 26743.2-91 Caprolactam for industrial use. Determination of crystallizing point 83.080.10

26743-03 1991 　 GOST 26743.3-91 Caprolactam for industrial use. Determination of absorbance at a wave length of 290 nm 83.080.10

26743-04 1985 　 GOST 26743.4-85 Caprolaktam. Method for determination of iron content 83.080.10

26743-05 1991 　 GOST 26743.5-91 Caprolactam. Determination of acidity, alkalinity and pH of 20 percent aqueous solution of caprolactam 83.080.10

26743-06 1985 　 GOST 26743.6-85 Caprolaktam. Method for determination of cyclohexanone oxime content 83.080.10

26743-07 1986 　 GOST 26743.7-86 Caprolactam. Method determination of permanganate index 83.080.10

26743-08 1986 　 GOST 26743.8-86 Caprolactam. Determination of volatile base content 83.080.10

26996 1986 　 GOST 26996-86 Polypropylene and copolymers of propylene. Specifications 83.080.20

27319 1987 　 GOST 27319-87 Thermoplastic materials. Method of determination of thermal bonding strength 83.080.20

27748 1988 　 GOST 27748-88 Polyolefins. Test procedure for the determination of contaminants 83.080.20

27952 1988 　 GOST 27952-88 Unsaturated polyester resins. Specifications 83.080.10

28157 1989 　 GOST 28157-89 Tests for flammability of plastic materials 83.080

28250 1989 　 GOST 28250-89 Polystyrene high-impact. Specifications 83.080.20

28593 1990 　 GOST 28593-90 Resins for sell-extiguishing laminates. Test methods 83.080.10

28804 1990 　 GOST 28804-90 Moulding phenolic materials. General specification 83.080.10

29127 1991 　 GOST 29127-91 Plastics. Thermogravimetry of polymers. Temperature scanning method 83.080

29243 1991 　 GOST 29243-91 Plastics. Unsaturated polyester resins. Determination of reactivity at 80 grad C. (Conventional method) 83.080.10

29326 1992 　 GOST 29326-92 Plastics. Phenolic resins. Determination of reactivity of resols under acid conditions 83.080.10

29327 1992 　 GOST 29327-92 Plastics. Liquid phenolic resins. Determination of water mixibility 83.080.10

30095 1993 　 GOST 30095-93 Polyester moulding materials (premixes). General specifications 83.080.10

50029 1992 　 GOST R 50029-92 Plastics. Homopolimer and copolimer resins of vinyl chloride. Determination of pH of aqueous extract 83.080.20

50108 1992 　 GOST R 50108-92 Plastics. Polyvinylchloride resins for general use. Determination of hot plasticizer absorption 83.080.20

50114 1992 　 GOST R 50114-92 Plastics. Determinations of apparent density of moulding materials that can be poured from a specified funnel 83.080

50115 1992 　 GOST R 50115-92 Plastics. Determination of apparent density of moulding material that cannot be poured from a specified funnel 83.080

50131 1992 　 GOST R 50131-92 Plastics. Determination of pourability 83.080

50178 1992 　 GOST R 50178-92 Plastics. Resins in the liquid state or as emulsions or dispersions. Determination of apparent viscosity by Brookfild method 83.080

50183 1992 　 GOST R 50183-92 Plastics. Polyvinylchloride resines. Determination of number of impurites and foreign particles 83.080.20

50485 1993 　 GOST R 50485-93 Plastics. Homopolymer and copolymer resins of vinyl chloride. Determination of compacted apparent bulk density 83.080.20

50486 1993 　 GOST R 50486-93 Plastics. Phenolic resins. Determination of hexamethylentetramine content 83.080.10

50487 1993 　 GOST R 50487-93 Plastics. Qualitative evaluation of the bleeding of colorants 83.080

50490 1993 　 GOST R 50490-93 Plastics. Unsaturated polyester resins. Determination of hydroxyl value 83.080.10

50491 1993 　 GOST R 50491-93 Plastics. Aminoplastic moulding materials. Determination of volatile matter 83.080.10

50492 1993 　 GOST R 50492-93 Plastics. Liquid epoxide resins. Determination of tendency to cristallize 83.080.10

50583 1993 　 GOST R 50583-93 Polymer composites. List of properties 83.080

51695 2000 　 GOST R 51695-2000 Poly(ethylene terephthalate). General specifications 83.080

52021 2003 　 GOST R 52021-2003 Epoxy resins and related materials. Methods for determination of mass percentage of chlorine 83.080.10

ISO 01159 1993 　 GOST R ISO 1159-93 Plastics. Vinylchloride-vinylacetate copolymers. Determination of vinylacetate 83.080.20

ISO 08620 1996 　 GOST ISO 8620-96 Plastics. Phenolic resin powder. Sieve analysis using air-jet sieve apparatus 83.080.10

83.100 多孔質体

Sort Mk 規格番号規格名称(英語) 国際規格分類
( ICSコードの説明 )

00409 1977 　 GOST 409-77 Plastics cellular and rubber cellular. Method for determination of apparent density 83.100
83.060

15873 1970 　 GOST 15873-70 Elexible cellular plastics. Method of test for tensile properties 83.100

17370 1971 　 GOST 17370-71 Cellular rigid plastics. Tensile strength test method 83.100

18336 1973 　 GOST 18336-73 Rigid cellular plastics. Method of test for modulus of elasticity 83.100

18564 1973 　 GOST 18564-73 Rigid cellular plastics. Static bend test 83.100

20869 1975 　 GOST 20869-75 Rigid cellular plastics. Method for determination of water absorption 83.100

20989 1975 　 GOST 20989-75 Rigid cellular plastics. Method for determining dimension stability 83.100

20990 1975 　 GOST 20990-75 Flexible cellular foams. Method for determination of fatigne at cyclic compression 83.100

22346 1977 　 GOST 22346-77 Flexible cellular plastics. Method for the determination cold-resistance 83.100

23206 1978 　 GOST 23206-78 Rigid cellular plastics. Compression test method 83.100

24434 1980 　 GOST 24434-80 Laminated wall and roof panels with plastic foam thermal insulation. Plastic foams. Method of determining shrinkage 91.060.99
83.100

24616 1981 　 GOST 24616-81 Plastics celluar and foam rubber. Method for determination of hardness 83.100

25015 1981 　 GOST 25015-81 Plastics celluar and foam rubber. Method for measuring linear dimensions 83.100

26605 1993 　 GOST 26605-93 Polymeric materials cellular flexible. Determination of stress-strain characteristics in compression and compression stress 83.100

29088 1991 　 GOST 29088-91 Polymeric materials cellular flexible. Determination of tensile strength and elongation at break 83.100

29089 1991 　 GOST 29089-91 Polymeric material, cellular flexible. Determination of compression set 83.100

29171 1991 　 GOST 29171-91 Polymeric materials, cellular flexible. Method of assessment of air flow value at constant pressure-drop 83.100

50171 1992 　 GOST R 50171-92 Polymeric materials cellular flexible. Determination of stress-strain characteristic in compression 83.100

ISO 02439 1993 　 GOST R ISO 2439-93 Polymeric material, cellular flexible. Determination of hardness (indentation technique) 83.100

ISO 03385 1993 　 GOST R ISO 3385-93 Flexible cellular polymeric materials. Determination of fatigue by constant-load pounding 83.100

83.120 強化プラスチック
注: 複合強化材料→ 59.100

Sort Mk 規格番号規格名称(英語) 国際規格分類
( ICSコードの説明 )

00005 1978 　 GOST 5-78 Constructive textile and asbestos laminates. Specification 83.120

10292 1974 　 GOST 10292-74 Constructive glass fabric reinforced laminate. Specifications 83.120

17478 1972 　 GOST 17478-72 Moulding material Дcb. Specifications 83.120

17478 1995 　 GOST 17478-95 Moulding materials. Measuring glass-fibre-base laminate and granulated glass-fibre-base laminate. Specifications 83.120

25288 1982 　 GOST 25288-82 Constructive plastic mosses. Quality characteristics nomenclature 83.120

50303 1992 　 GOST R 50303-92 Reinforced plastics based on unsaturated polyester resines. Determination of residual styrene monomer content 83.120

50443 1992 　 GOST R 50443-92 Prepregs and premixes. Terms and definitions 01.040.83
83.120

50578 1993 　 GOST R 50578-93 Polymer composites. Plate distortion shear test 83.120

50579 1993 　 GOST R 50579-93 Polymer composites. Classification 83.120

83.140 ゴム及びプラスチック製品
注: 成形加工又は押し出し加工製品は、製品の特性によって分類する。
注: 伝動ベルト→ 21.220.10
注: コンベヤ・ベルト→ 52.040.20
注: ゴム及びプラスチック被覆織物→ 89.080.40
注: 履物→ 61.060
注: タイヤ→ 83.160

Sort Mk 規格番号規格名称(英語) 国際規格分類
( ICSコードの説明 )

00003 1988 　 GOST 3-88 Surgical rubber gloves. Specifications 11.140
83.140.99

00004-017 1980 　 GOST 4.17-80 Quality rating system. Rubber seals. Quality characteristics nomenclature 03.120
83.140.50

00004-224 1983 　 GOST 4.224-83 Quality ratings system. Building. Sealants and caulking materials and products. Nomenclature of characteristics 83.140
03.120
91.100.50

00012-04-118 1982 　 GOST 12.4.118-82 Occupational labour safety standards. Polimerous film materials and synthetic leather as the means of protection arms. The method of determination of resistance to puncture 13.340.40
59.140.30
83.140.10

00012-04-143 1984 　 GOST 12.4.143-84 Occupational safety standards system. Film polymer materials for hand protection means. Methods for determination of permeability factor of organic solvents 13.340.40
83.140.10

00012-04-167 1985 　 GOST 12.4.167-85 Occupational safety standards system. Filmy polymeric materials for hand protection means. Method of determination of abrasion resistance. 13.340.40
83.140.10

00038 1972 　 GOST 38-72 Rubber packing rings for joining heads of brake hoses and end cocks of autobrakes. Specifications 83.140.50

00126 1979 　 GOST 126-79 Rubber galoshes (hand-built). Specifications 83.140.99
61.060

00235 1978 　 GOST 235-78 Rubber tubes for bicycle pumps. Specifications 83.140.99

00928 1974 　 GOST 928-74 Plastic details for ignition devices. Specifications 83.140.99

01284-02 1989 　 GOST 1284.2-89 Y-belts of standart cross-sections. Specifications 83.140
21.220.10

01335 1984 　 GOST 1335-84 Rubber brake hoses with thread reinforcement for railway transport and underground without couplings. Specifications 83.140.40

02162 1978 　 GOST 2162-78 Adhesive rubberized tape. Specifications 83.140.10

02162 1997 　 GOST 2162-97 Adhesive rubberized tape. Specifications 29.035.20
83.140

02707 1975 　 GOST 2707-75 Backelite glueing film. Specifications 83.140.10

02748 1977 　 GOST 2748-77 Hard rubber plates, rods and tubes for electrotechnical purposes. Specifications 83.140.99

03251 1991 　 GOST 3251-91 Rubber textile. Specifications 11.120.20
83.140

03302 1983 　 GOST 3302-83 Rubber ice bags. Specifications 11.040.99
83.140

03302 1995 　 GOST 3302-95 Rubber ice-bags. Specification 11.140
83.140.99

03303 1982 　 GOST 3303-82 Rubber hot-water bottles. Specifications 11.140
83.140.99

03303 1994 　 GOST 3303-94 Rabber hot-water bottles. Specifications 11.140
83.140.99

03399-1976 　 GOST 3399-76 Medical rubber tubes. Specifications 11.040
83.140.99

04645 1981 　 GOST 4645-81 Rubber condoms. Specifications 83.140.99
11.200

04671 1976 　 GOST 4671-76 Rubber and rubberized metal components for the bottom hole hydraulic engine bearings. Specifications 83.140.99

04997 1975 　 GOST 4997-75 Dielectric rubber carpets. Specifications 83.140.99

05228 1989 　 GOST 5228-89 Rubber O-rings for the couplings of asbestos-concrete pipes. Specifications 83.140.50

05375 1979 　 GOST 5375-79 Rubber moulded boots. Specifications 83.140.99
61.060

05398 1976 　 GOST 5398-76 Textile reinforced pressure-suction rubber hoses without fittings. Specifications 83.140.40

05496 1978 　 GOST 5496-78 Rubber technical tubes. Specifications 83.140.99

05813 1993 　 GOST 5813-93 Fan V-belts and pulleys for engines of cars, tractors and combines. Specifications 83.140.99
43.060.99

06051 1976 　 GOST 6051-76 Hollow rubberfabric gaskets. Specifications 83.140.50

06286 1973 　 GOST 6286-73 High-pressure rubber hoses with metal braids without fittings. Specifications 83.140.40

06365 1974 　 GOST 6365-74 Rubber protectors for drill pipes. Specifications 83.140.99
73.100.30

06410 1980 　 GOST 6410-80 Shoes, soles and overboots are rubber and wellingtons confectined. Specifications 83.140.99
61.060

06467 1979 　 GOST 6467-79 Vulcanized rubber cords of round and square cross-sections. Specifications 83.140.99

06557 1989 　 GOST 6557-89 Rubber rings for connection fitting. Specifications 83.140.50

06678 1972 　 GOST 6678-72 Rubber sealing cups for pneumatic apparatus. Specifications 83.140.50

06980 1976 　 GOST 6980-76 Accumulator ebonite monoblocks for autocars, autobuses and tractors. Specifications 83.140.99
29.220

07199 1977 　 GOST 7199-77 Rubber-metallic ship bearings. Specifications 83.140.99
21.100

07251 1977 　 GOST 7251-77 Polyvinilohloride linoleum with woven and unwoven backing. Specifications 97.150
83.140.99

07338 1990 　 GOST 7338-90 Rubber and rubber-fabric sheets. Specifications 83.140.99

07730 1989 　 GOST 7730-89 Cellulose film. Specifications 83.140.10

07877 1975 　 GOST 7877-75 Fire pressure rubberised hoses made of synthetic threads. General specifications 83.140.40

08752 1979 　 GOST 8752-79 Metal insert rubber seals for rotating. Specifications 83.140.50

09155 1988 　 GOST 9155-88 Rubber and rubbertextile sports footwear (moulded and injection moulded). Specifications 83.140.99
61.060

09298 1977 　 GOST 9298-77 Accumulator ebonite monoblocks for aviation. Specifications 83.140.99
49.060

09356 1975 　 GOST 9356-75 Rubber hoses for gas welding and metal cutting. Specifications 83.140.40

09438 1985 　 GOST 9438-85 Polyvinylbutyral adhesive film. Specifications 83.140.10
83.180

09590 1976 　 GOST 9590-76 Laminated paper decorative plastic. Specifications 83.140.20

09639 1971 　 GOST 9639-71 Sheets from unplasticized polyvinylchloride (sheet vinyplast). Specifications 83.140.10

09784 1975 　 GOST 9784-75 Organic sheet glass for illuminating engineering. Specifications 83.140.10

09833 1973 　 GOST 9833-73 Rubber toroidal sealing rings for hydraulic and pneumatic equipment. Construction and dimensions 83.140.50

09998 1986 　 GOST 9998-86 Polyvinylchloride films for household use. General specifications 83.140.10

10124 1976 　 GOST 10124-76 Solid rubber sheets and components for shoes bottom. Specifications 83.140.99
61.060

10354 1982 　 GOST 10354-82 Polyethylene film. Specifications 83.140.10

10362 1976 　 GOST 10362-76 Pressure hoses of vulcanized rubber with thread reinforcement and without end fitting. Specifications 83.140.40

10667 1990 　 GOST 10667-90 Sheet organic glass. Specifications 83.140.10

11529 1986 　 GOST 11529-86 PVC materials for floors. Methods of control 97.150
83.140.99

11583 1974 　 GOST 11583-74 Polimer materials, building and finishing. Methods for the determination of light resistance and uniformity of painting and lightness 83.140.99

11679-01 1976 　 GOST 11679.1-76 Rubber-metal shock-absorbers for instruments. Specifications 83.140.99

11679-02 1976 　 GOST 11679.2-76 Rubber-metal shock-absorbers for instruments. Fitting. Specifications 83.140.99

12580 1978 　 GOST 12580-78 Latex films. Method of the determination of elastic and tensile stress-strain properties 83.140.10

12632 1979 　 GOST 12632-79 Porous rubber sheets and details for shoes bottom. Specifications 83.140.99
61.060

12855 1977 　 GOST 12855-77 Rubber sheet for transformers. Specifications 83.140.99

12998 1985 　 GOST 12998-85 Polystyrene film. Specifications 83.140.10

13489 1979 　 GOST 13489-79 Sealants, marks У-30M and УТ-31. Specifications 83.140.50

14183 1978 　 GOST 14183-78 Organic watch glass. Specification 83.140.10

14236 1981 　 GOST 14236-81 Polymer films. Tensile strength test method 83.140.10

14896 1984 　 GOST 14896-84 Rubber U-packing seals for hydraulic devices. Specifications 83.140.50

15152 1969 　 GOST 15152-69 Unified system of corrosion and ageing pretection. Industrial rubber products for tropics. General requirements 19.040
83.140

15588 1986 　 GOST 15588-86 Polystyrene foam boards. Specifications 91.100.99
83.140

15976 1981 　 GOST 15976-81 Perforated and perforated-corrugated vinyl plastic film. Specifications 83.140.10

16214 1986 　 GOST 16214-86 Polyvinylchloride electroinsulating tape with adhesive laver. Specifications 83.140.10

16272 1979 　 GOST 16272-79 Technical plasticized polyvinylchloride film. Specifications 83.140.10

16398 1981 　 GOST 16398-81 Calendered vinyl plastic film. Specifications 83.140.10

17035 1986 　 GOST 17035-86 Plastics. Method for measuring thickness of plastic films and sheets 83.140.10

17053-01 1980 　 GOST 17053.1-80 Ship shock absorbers AKCC-M. Specifications 83.140.99

17053-02 1980 　 GOST 17053.2-80 Inserts for ship shock absorbers АКСС-М. Specifications 83.140.99

17133 1983 　 GOST 17133-83 Rubber sheets for articles, contacting with food stuff. Specifications 83.140.99

17241 1971 　 GOST 17241-71 Polymer materials and products for flooring. Classification 83.140.99
97.150

17311 1971 　 GOST 17311-71 Moulded rubber durable soles, heels and heel pieces. Specifications 83.140.99
61.060

17563 1980 　 GOST 17563-80 Buttons for fixing soft tapes in cabling. Design and dimensions 83.140.99

17617 1972 　 GOST 17617-72 Polyvinylchloride plastic bands. Specifications 83.140.10

17622 1972 　 GOST 17622-72 Industrial organic plastic. Specifications 83.140.10

18108 1980 　 GOST 18108-80 Polyvinylchloride linoleum with heat and sound-insulating backing. Specifications 83.140
91.100.60

18599 1983 　 GOST 18599-83 Polyethylene pressure pipes. Specifications 23.040.20
83.140.30

18599 2001 　 GOST 18599-2001 Polyethylene pressure pipes. Specifications 23.040.20
83.140.30

18698 1979 　 GOST 18698-79 Textile carcass rubber pressure hoses. Specifications 83.140.40

18829 1973 　 GOST 18829-73 Rubber o-ring seals for hydraulic and pneumatic equipment. Specifications 83.140.50

19034 1982 　 GOST 19034-82 Tubes of polyvinylchloride plastic. Specifications 23.040.20
83.140.30

19111 1977 　 GOST 19111-77 PVC shaped linear articles. Specifications 83.140.99

19111 2001 　 GOST 19111-2001 Polyvinylchloride shaped linear articles for interior finish. Specifications 83.140

19177 1981 　 GOST 19177-81 Rubber porous sealing gaskets. Specifications 91.100.50
83.140.50

19421 1974 　 GOST 19421-74 Rubber protecting bushes. Design and dimensions 83.140.99

19422 1974 　 GOST 19422-74 Rubber protecting gaskets. Design and dimensions 83.140.50

20010 1993 　 GOST 20010-93 Gloves rubber industrial. Specifications 83.140.99
13.340.40

20477 1986 　 GOST 20477-86 Polyethylene tape with adhesive layer. Specifications 83.140.10
83.180

21000 　 GOST 21000-81 Non-strengthened and strengthened fluoroplast sheets laminated with foil. Specifications 83.140.10

21218 1975 　 GOST 21218-75 Rubber spheres dividing for pipelines. Specifications 83.140.99

21353 1975 　 GOST 21353-75 Latex films. Method for determination of tear resistance 83.040.10
83.140.10

21905 1976 　 GOST 21905-76 Diaphragms of rubber. Terms and definitions 01.040.83
83.140

22460 1977 　 GOST 22460-77 Polymer heat shrinkage film packs for topographic charts. Specifications 55.080
83.140.99

22469 1977 　 GOST 22469-77 Swimming rubber flippers. General specifications 97.220.40
83.140.99

22546 1977 　 GOST 22546-77 Heatinsulating products of foam-plastic of FRP-1. Specifications 91.100.60
83.140.99

22704 1977 　 GOST 22704-77 Rubber-fabric chevron seals for hydraulic units. Specifications 83.140.50

23744 1979 　 GOST 23744-79 Non-drying mastic 51-Г-6. Specifications 83.140.50

23831 1979 　 GOST 23831-79 V-drive rubber coated fabric flat belts. Specifications 83.140.99
21.220.10

24025 1980 　 GOST 24025-80 Non-drying mastic 51-Г-7. Specifications 83.140.50

24105 1980 　 GOST 24105-80 Plastics products. Terms and definitions of defects 01.040.83
83.140.99

24157 1980 　 GOST 24157-80 Plastic pipes. Method of determination of the resistance to constant internal pressure 23.040.20
83.140.30

24222 1980 　 GOST 24222-80 Film and tape from polytetrafluorethylene. Specifications 83.140.10

24234 1980 　 GOST 24234-80 Polyethylene terephtalate film (polyester film). Specifications 83.140.10

24285 1980 　 GOST 24285-80 Sealant of marks УТ-34. Specifications 83.140.50

24811 1981 　 GOST 24811-81 Rubber wipers for rods. Types, basic parameters and dimensions 83.140.99

24848-01 1981 　 GOST 24848.1-81 Variator V-belts for industrial equipment. Basic sizes and methods of control 83.140.99
21.220.10

24848-02 1981 　 GOST 24848.2-81 Variator V-belts for industrial equipment. Specifications 83.140.99
21.220.10

24848-03 1981 　 GOST 24848.3-81 Variator V-belts for industrial equipment. Calculation of drives and transmitted power 83.140.99
21.220.10

24944 1981 　 GOST 24944-81 Pvc film decorative finishing. Specifications 83.140.10

25174 1982 　 GOST 25174-82 Rubber pressure hoses with textile reinforcement. Parameters and dimensions 83.140.40

25209 1982 　 GOST 25209-82 Plastics and polymer films. Methods for the determination of surface charges of electrets 83.140.10

25250 1988 　 GOST 25250-88 PVC film for production of food and medicine package. Specifications 83.140.10

25452 1990 　 GOST 25452-90 High pressure rubber hoses spiral wire reinforced without assembly. Specifications 83.140.40

25609 1983 　 GOST 25609-83 Soft and tile materials for floor covering. Procedure for determining the heat absoprtion value 97.150
83.140.99

25621 1983 　 GOST 25621-83 Sealants and caulking products for building constructions. Classification and general technical requirements 83.140.99

25640 1983 　 GOST 25640-83 Air-foam rubber products for industrial, agricultural and transport engineering. Specifications 83.140.99

25676 1983 　 GOST 25676-83 Rubber rotary drilling hoses. Principal parameters and dimensions, requirements, testing methods, marking, packing, transportation and storage 83.140.40

25736 1983 　 GOST 25736-83 Rubber hoses for automobile pneumatic brakes. Principal parameters and dimensions, technical requrements, testing methods, marking, packing, transportation and storage, operating rules 83.140.40

25945 1998 　 GOST 25945-98 Building polymer sealing non-hardening materials and products. Test methods 91.100.50
83.140.99

25951 1983 　 GOST 25951-83 Thermoshrinking polyethylene film. Specifications 83.140.10

26089 1984 　 GOST 26089-84 Rubber hoses for hydraulic brakes of automobiles. Basic parameters and dimensions, requirements, test, methods, marking, packing, trasportation and storage 83.140.40

26128 1984 　 GOST 26128-84 Polymer films. Methods of tear resistance determination 83.140.10

26150 1984 　 GOST 26150-84 Decorative polymer building materials and products on the basic of PVC. Method of sanitary-chemical estimation 83.140.99

26379 1984 　 GOST 26379-84 Wide V-belts for variable-speed drives of agricultural machines. Specifications 83.140.99
21.220.10

27019 1986 　 GOST 27019-86 Rolled polymer materials for floors. Method of rapid determination of sound-insulation properties 97.150
83.140.10

27023 1986 　 GOST 27023-86 Welded carpets of PVC linoleum on heat- and sound-insulating backing. Specifications 97.150
83.140

27077 1986 　 GOST 27077-86 Thermoplastic fitting. Methods of determination of the fittings appearance alteration after heating 83.140.30

27078 1986 　 GOST 27078-86 Thermoplastic pipes. Methods of determination of the tubes length after heating 83.140.30

27175 1986 　 GOST 27175-86 Polyvinylchloride film materials for domestic user. Marking, packing, transportation, storing 83.140.10

27213 1987 　 GOST 27213-87 Inflatable dunnage for cargo fixing common. Specifications 83.140.99

28117 1989 　 GOST 28117-89 Unplasticized polyvinylchloride pipes. Types and assortment 83.140.30

28618 1990 　 GOST 28618-90 Rubber hoses and hose assemblies for rotary drilling and vibration applications. Specifications 75.180.10
83.140.40

28621 1990 　 GOST 28621-90 Rubber and rubber products. Guide to the identification of antidegradants. Thin layer chromatographic methods 83.060
83.140

28968 1991 　 GOST 28968-91 Rubber hoses. Determination of abrasion resistance of the outer cover 23.040.70
83.140.40

29324 1992 　 GOST 29324-92 [withdrawn => GOST ISO 161-1-2004]
Thermoplastics pipes for the transport of fluids. Nominal outside diameters and nominal pressures 23.040.20
83.140.30

29325 1992 　 GOST 29325-92 Plastics pipes. Measurement of dimensions 23.040.20
83.140.30

30066 1996 　 GOST 30066-96 Electroinsulating film "Lavaril-2N". Specifications 83.140.10
29.035.20

30192 1994 　 GOST 30192-94 Hoses for household vacuum cleaners. Parameters and dimensions 83.140.40
97.080

30547 1997 　 GOST 30547-97 Roofing and hydraulic insulating materials in rolls. General specifications 83.140

30673 1999 　 GOST 30673-99 Polyvinylchloride profiles for windows and doors. Specifications 83.140.01
83.140.99

30973 　 GOST 30973-2002 Polyvinylchloride profiles for windows and doors. Method of determination of resistance to climatic effects and estimation of life circle 83.140.01

31014 2002 　 GOST 31014-2002 Glass filled poliamides profils. Specifications 83.140.01

50027 1992 　 GOST R 50027-92 Rubber and plastics hoses. Assessment of ozone resistance under static conditions 23.040.70
83.140.40

50028 1992 　 GOST R 50028-92 Rubber or plastics hoses and tubing. Bending test 23.040.70
83.140.40

50110 1992 　 GOST R 50110-92 Polymeric membranes. Definition method of flat ultrafiltration membranes water flux 83.140.99

50111 1992 　 GOST R 50111-92 Polymeric membranes. Definition method of flat membranes strength 83.140.99

50166 1992 　 GOST R 50166-92 Fan V-belts and pulleys for engines of cars, tractors and combines. Specifications 83.140

50440 1992 　 GOST R 50440-92 Flat transmission belts and corresponding pulleys. Widths 21.220.10
83.140.99

50441 1992 　 GOST R 50441-92 Flat transmission belts. Lengths 21.220.10
83.140.99

50516 1993 　 GOST R 50516-93 Polymer membranes. Membrane bubble point determination technique 83.140.99

50517 1993 　 GOST R 50517-93 Polymer membranes. The method of determination of weight fraction of latex particles not permeated through microfiltration membranes 83.140.99

50598 1993 　 GOST R 50598-93 Structural laminates based on phenol-formaldehyde resins. General specifications 83.140.20

50823 1995 　 GOST R 50823-95 Duble-socket fittings for unplasticized polyvinil chloride pressure pipes with elastic sealing ring type joints. Minimum depths of engagement 23.040.45
83.140.30

50824 1995 　 GOST R 50824-95 Single sockets for unplasticized polyvinyl chloride and chlorinated polyvinyl chloride pressure pipes with elestic sealing ring type joints. Minimum depths of engagement 23.040.45
83.140.30

50962 1996 　 GOST R 50962-96 Plastics vessels and articles for economic purposes. General specifications 83.140
83.140.99

51068 　 GOST R 51068-97 Latex nipples for babies. Specifications 83.140.99
11.140

51720 2001 　 GOST R 51720-2001 Polymeric sacks. General specifications 55.080
83.140.99

51760 2001 　 GOST R 51760-2001 Polymeric consumers' packagings. General specifications 55.020
83.140.99

51977 2002 　 GOST R 51977-2002 Plastic accumulator cases. Specifications 83.140.01

52238 2004 　 GOST R 52238-2004 Single-use sterile rubber surgical gloves. Specification 83.140

52239 2004 　 GOST R 52239-2004 Single-use medical examination gloves. Part 1. Specification for gloves made from rubber latex or rubber solution 83.140

52779 2007 ★ GOST R 52779-2007 Polyethylene fittings for gas pipelines. General specifications 23.040.45
83.140.30

ISO 00161-01 2004 　 GOST ISO 161-1-2004 Thermoplastics pipes for the conveyance of fluids. Nominal outside diameters and nominal pressures. Metric series 23.040.20
83.140.30

ISO 00580 2008 ★ GOST R ISO 580-2008 Plastics piping systems. Injection-moulded thermoplastics fittings. Methods for determination of fittings appearance alteration after heating 23.040.45
83.140.30

ISO 03126 2007 ★ GOST R ISO 3126-2007 Plastics piping systems. Plastics components of piping systems. Determination of dimensions 23.040.20
83.140.30

ISO 04074-05 1993 　 GOST ISO 4074-5-93 Rubber condoms. Testing for holes 11.200
83.140.99

ISO 04074-09 1993 　 GOST ISO 4074-9-93 Rubber condoms. Determination of tensile properties 11.200
83.140.99

ISO 06310 1993 　 GOST R ISO 6310-93 [withdrawn]
Road vehicles. Brake linings. Compressibility. Test procedure 43.040.40
83.140.99

ISO 06311 1993 　 GOST R ISO 6311-93 Road vehicles. Brake linings. Internal shear strength of lining material. Test procedure 43.040.40
83.140.99

ISO 06312 1993 ★ GOST R ISO 6312-93 [withdrawn]
Road vehicles. Brake lilings. Shear strength of disc brake pag and drum brake shoe assemblies. Test procedure 43.040.40
83.140.99

ISO 06313 1993 　 GOST R ISO 6313-93 Road vehicles. Brake linings. Effects of heat on dimensions and form of disc brake pads. Test procedure 43.040.40
83.140.99

ISO 06314 1993 　 GOST R ISO 6314-93 Road vehicles. Brake lilings. Resistance to water, saline solution, oil and brake fluid. Test procedure 43.040.40
83.140.99

ISO 06315 1993 　 GOST R ISO 6315-93 Road vehicles. Brake linings. Seizure to ferrous mating surface due to corrosions. Test procedure 43.040.40
83.140.99

ISO 07881 1994 　 GOST R ISO 7881-94 Rood vehicles. Brake linings. Evaluation of friction material characteristics. Small sample bench test procedure 43.040.40
83.140.99

83.160 タイヤ
注: タイヤチューブ及びタイヤバルブを含む。

Sort Mk 規格番号規格名称(英語) 国際規格分類
( ICSコードの説明 )

00004-494 1994 　 GOST 4.494-94 Product-quality index system. Tires for off the road trucks, tractors, carthmoving, loading, mining and agricultural machinery. Nomenclature of indices 83.160

00012-04-145 1984 　 GOST 12.4.145-84 Occupational safety standards system. Rubber for special shoes bottom. Method for determination of heat conduction 13.340.50
83.160

00041-030 1999 　 GOST R 41.30-99 Uniform provisions concerning the approval of pneumatic tyres for motor vehicles and their trailers 83.160.10

00041-054 1999 　 GOST R 41.54-99 Uniform provisions concerning the approval of pneumatic tyres for commercial vehicles and their trailers 83.160.10

00041-075 1999 　 GOST R 41.75-99 Uniform provisions concerning the approval of pneumatic tyres for motor cycles and mopeds 83.160.10

00041-088 1999 　 GOST R 41.88-99 Uniform provisions concerning the approval of retroreflective tyres for two-wheeled vehicles 83.160.10

00041-106 1999 　 GOST R 41.106-99 Uniform provisions concerning the approval of pneumatic tyres for agricultural vehicles and their trailers 83.160.30

00041-108 1999 　 GOST R 41.108-99 Uniform provisions concerning the approval for the production of retreated pneumatic tyres for motor vehicles and their trailers 83.160

00041-109 1999 　 GOST R 41.109-99 Uniform provisions concerning the approval for the production of retreated pneumatic tyres for commercial vehicles and their trailers 83.160

04750 1979 　 GOST 4750-79 Pneumatic tyres for bicycles. Specifications 83.160.10

04750 1989 　 GOST 4750-89 Pneumatic tyres for bicycles. Specifications 83.160.10

04754 1980 　 GOST 4754-80 Pneumatic tyres for motor-cars. Specifications 83.160.10

04754 1997 　 GOST 4754-97 Pneumatic tyres for passenger cars, trailers for them, light-duty trucks and buses of especially small capacity. Specifications 83.160.10

05513 1986 　 GOST 5513-86 Pneumatic tyres for trailers, buses and trolleybuses. Specification 83.160.10

05513 1997 　 GOST 5513-97 Pneumatic tyres for trailers, buses and trolleybuses. Specifications 83.160.10

05652 1989 　 GOST 5652-89 Pneumatic tyres for motor-cycles, cycle-cars, motor-scooters and motor-bicycles. Specifications 83.160.10

05883 1989 　 GOST 5883-89 Solid-rubber tyres. Specifications 83.160

07463 1989 　 GOST 7463-89 Pneumatic tyres for tractors and agricultural machinery. Specifications 83.160.30

07463 2003 　 GOST 7463-2003 Pneumatic tyres for tractors and agricultural machinery. Specifications 83.160.30

08107 1975 　 GOST 8107-75 Valves for pneumatic tubes and tyres with constant pressure. General specifications 43.040
83.160.10

08430 1985 　 GOST 8430-85 Pneumatic tyres for earthmoving, loading, and mining machines. Specifications 83.160.10

08430 2003 　 GOST 8430-2003 Pneumatic tyres for earthmoving, loading and mining machines. Specifications 83.160.10

12715 1983 　 GOST 12715-83 Diagonal pneumatic tires for heavy duty vehicles, construction machines and earthmoving and hauling. Basic parameter and dimensions 83.160.10

12715 1995 　 GOST 12715-95 Narrow and wide base off-road tyres and rims. Part 2. Loads and inflation pressures 83.160.10

13298 1990 　 GOST 13298-90 Tyres with regulated pressure. Specifications 83.160.10

17394 1979 　 GOST 17394-79 Wide profile tyres with adjusted pressure. Main parameters and dimensions 83.160

20993 1975 　 GOST 20993-75 Pneumatic tyres radial and diagonal for motor-cars. Basis parameters and dimensions 83.160.10

22374 1977 　 GOST 22374-77 Pneumatic tyres. Construction. Terms and definitions 01.040.83
83.160

23834 1989 　 GOST 23834-89 Pneumatic tyres for sport bicycles. Specifications 83.160.10

24567 1981 　 GOST 24567-81 Pneumatic tyres. Method for measurement of effective rolled circumference in road tests 83.160.10

24779 1981 　 GOST 24779-81 Pneumatic tyres. Packing, transportation, keeping 83.160

24985 1981 　 GOST 24985-81 Tyres with regulated pressure. Main parameters and dimensions 83.160

25304 1988 　 GOST 25304-88 Diagonal pneumatic industrial tyres. The main parameters, dimensions, marking, packing, transportation and keeping 83.160

25641 1984 　 GOST 25641-84 Pneumatic tyres for tractors and agricultural machinery. Basic parametres and dimensions 83.160.30

25641-01 1994 　 GOST 25641.1-94 Tyres (ply rating marked series) and rims for agricultural tractors and machines. Type designation and dimensions 83.160.30

25641-02 1994 　 GOST 25641.2-94 Tyres (ply rating marked series) and rims for agricultural tractors and machines. Tyre load ratings 83.160.30

25692 1983 　 GOST 25692-83 Pneumatic tyres. Method of determinations of cover static unbalans 83.160.10

26000 1983 　 GOST 26000-83 Pneumatic tyre. Method of identifing of main sizes 83.160.10

26585 1985 　 GOST 26585-85 Pneumatic types for off-the-road trucks technical condition. Specifications 83.160.10

26585 2003 　 GOST 26585-2003 Giant and super giant pneumatic tyres for off-the-road trucks. Specifications 83.160.10

27704 1988 　 GOST 27704-88 Pneumatic tyres. Rules of carrying out indoor testing 83.160

28169 1989 　 GOST 28169-89 Pneumatic tyres. Methods for determination of tyre wear resistance in outdoor testing 83.160.10

28630 1990 　 GOST 28630-90 Solid tyres. Terms and definitions 01.040.83
83.160

28727 1990 　 GOST 28727-90 Motorcycle tyres and rims (code-designated series). Part 1. Tyres 83.160.10

28728 1990 　 GOST 28728-90 Motorcycle tyres and rims (code-designated series). Part 2. Tyre load ratings 83.160.10

28837 1990 　 GOST 28837-90 Truck and bus tyres and rims (metric series). Part 1. Pneumatic tires 83.160.10

29217 1991 　 GOST 29217-91 Moped tyres and rims. Part 1. Pneumatic tyres 83.160.10

29218 1991 　 GOST 29218-91 Motorcycle tyres and rims (code-designated series). Diameter codes 4 to 12. Part 1. Pneumatic tyres 83.160.10

30191 1996 　 GOST 30191-96 Agricultural tractor drive-wheel. Tyres-service description (load index-speed symbol) marked tyres. Basic parameters and dimensions 83.160.30

30225 1994 　 GOST 30225-94 Tyres (ply rating marked series) and rims for agricultural tractors and machines. Log skidder tyres 83.160.30

30238-01 1996 　 GOST 30238.1-96 Tyres and rims (metric series) for agricultural tractors and machines. Tyre designation, dimensions and marking 83.160.30

30238-02 1998 　 GOST 30238.2-98 Tyres and rims (metric seriec) for agricultural tractors and machines. Service condition characteristics and load ratings 83.160.30

51893 2002 　 GOST R 51893-2002 Pneumatic tyres. General technical safety requirements 83.160.10

52102 2003 　 GOST R 52102-2003 Pneumatic tyres. Measurement of rolling resistance by deceleration method 83.160.10

52747 2007 ★ GOST R 52747-2007 Vehicles. Antiskid studs. General specifications 43.040.50
83.160.10

52800 2007 ★ GOST R 52800-2007 Noise. Coast-by methods for measurement of tyre-to-road sound emission 17.140.30
83.160.10

52899 2007 ★ GOST R 52899-2007 Pneumatic tyres for truck power-driven vehiclеs and trailers. Specifications 83.160

52900 2007 ★ GOST R 52900-2007 Pneumatic tyres for passenger cars and trailers for them. Specifications 83.160

ED1 04750 1979 　 GOST ED1 4750-79 [withdrawn => GOST ED1 4750-90]
Pneumatic tyres for bicycles. Specifications 83.160.10

ED1 04750 1990 　 GOST ED1 4750-90 Pneumatic tyres for bicycles. Specifications 83.160.10

ED1 05652 1989 　 GOST ED1 5652-89 Pneumatic tyres for motor-cycles, cycle-cars, motor-scooters and motor-bicycles. Specifications 83.160.10

ISO 03324-02 1993 　 GOST R ISO 3324/2-93 Aircraft tyres. Test methods for tyres 83.160.20

ISO 04000-01 2005 　 GOST R ISO 4000-1-2005 Passenger car tyres and rims. Part 1. Tyres (metric series) 83.160.10

ISO 13326 2003 　 GOST R ISO 13326-2003 Pneumatic tyres. Test methods for measuring uniformity 83.160.10

83.180 接着剤
注: 粘着テープを含む。
注:電気絶縁用粘着テープ→ 29.035.20

Sort Mk 規格番号規格名称(英語) 国際規格分類
( ICSコードの説明 )

00009-712 1986 　 GOST 9.712-86 Unified system of corrosion and ageing protection. Adhesives. Test methods of adhesiven bonds of rubber with rubber-fabric materials and metals for resistance to the influence of liquid agressive media 25.220
83.180

00209 1975 　 GOST 209-75 Rubber and glue. Methods of determination of metal bond strength at tearing 83.060
83.180

00411 1977 　 GOST 411-77 Rubber and glue. Methods for determination of metal bond strength at separation 83.060
83.180

02199 1978 　 GOST 2199-78 Rubber solution. Specifications 83.180

02290 　 GOST 2290-76 Fim balsam. Specifications 83.180

02631 1979 　 GOST 2631-79 Materials for retreading and repairing pneumatic tyres. Specifications 83.060
83.180

05170 1973 　 GOST 5170-73 Repair kits for pneumatic tyres. Specifications 83.060
83.180

09438 1985 　 GOST 9438-85 Polyvinylbutyral adhesive film. Specifications 83.140.10
83.180

12172 　 GOST 12172-74 Phenol-polivinylacetyl adhesives. Specifications 83.180

14759 　 GOST 14759-69 Adhesives. Method of determination of shear strength 83.180

14760 　 GOST 14760-69 Adhesives. Method of determination of tensile strength 83.180

14887 1980 　 GOST 14887-80 Optical adhesives. Types 83.180

18251 1987 　 GOST 18251-87 Gummed tape on paper substrate. Specifications 83.180

20477 1986 　 GOST 20477-86 Polyethylene tape with adhesive layer. Specifications 83.140.10
83.180

22345 1977 　 GOST 22345-77 Heat-resistant adhesive BC-10T. Specifications 83.180

24064 1980 　 GOST 24064-80 Masticsadhering rubber. Specifications 83.180

25717 　 GOST 25717-83 Adhesives. Methods of determination of shear modulus of adhesive in adhesive bond 83.180

26454 　 GOST 26454-85 Adhesives. Method for determination of elasticity modulus of adhesive in adhesive bond 83.180

28780 1990 　 GOST 28780-90 Synthetic adhesives. Terms and definitions 01.040.83
83.180

28966-01 1991 　 GOST 28966.1-91 Polymer adhesives. Method of determining cleavage strength 83.180

28966-02 1991 　 GOST 28966.2-91 Polymer adhesives. Method of determining peel strength 83.180

30307 1995 　 GOST 30307-95 Building polymer glueing latex mastics. Specifications 83.180

30535 1997 　 GOST 30535-97 Polymeric adhesives. Nomenclature of indices 83.180

83.200 ゴム及びプラスチック工業用設備

Sort Mk 規格番号規格名称(英語) 国際規格分類
( ICSコードの説明 )

00004-489 1989 　 GOST 4.489-89 Product-quality index system. Press moulds for manufacturing of plastic articles. Index nomenclature 03.120
83.200

00012-02-036 1978 　 GOST 12.2.036-78 Occupational safeti standards system. Press moulds for manufacturing mechanical-rubber articles. General safety requirements 13.100
83.200

00012-02-045 1980 　 GOST 12.2.045-80 Occupational safety standards system. Equipment for production of rubber-mechanical articles. Safety requirements 13.100
83.200

00012-02-045 1994 　 GOST 12.2.045-94 Occupational safety standards sustem. Equipment for the rubber technical products. Safety requirements 13.100
83.200

11441 1993 　 GOST 11441-93 Single-screw machines for rubber. Types, basic parameters and dimentions 83.200

11973 1988 　 GOST 11973-88 Shaper-velcanizers for types. Types, general parameters and dimensions 71.120
83.200

11996 1979 　 GOST 11996-79 Batch-type mixers for rubber. General specifications 83.200

11997 1989 　 GOST 11997-89 Hydraulic vulcanizing presses. Types, parameters and dimensions 83.200

14106 1980 　 GOST 14106-80 Horizontal vulcanizing pans. General specifications 83.200

14333 1979 　 GOST 14333-79 Rubber working mills. General specifications 83.200

14901 1979 　 GOST 14901-79 Press moulds for manufacturing rubber-armed collars. Technical requirements 83.200

14901 1993 　 GOST 14901-93 Press-moulds for manufacture of industrial rubber articles. General specifications 83.200

15940 1984 　 GOST 15940-84 Tire building machines. General technical requirements 83.200

20925 1975 　 GOST 20925-75 Units of changeable press-moulds with lowpositioned loading chamber for moulding thermoset articles. Construction and dimensions 83.200

20926 1975 　 GOST 20926-75 Unit for changeable compression moulding thermoset articles press-moulds. Construction and dimensions 83.200

20927 1975 　 GOST 20927-75 Inserts to the unit for changeable compression moulding press-moulds. Construction and dimensions 83.200

20928 1975 　 GOST 20928-75 Shank of the unit for changeable compression moulding press-moulds. Construction and dimensions 83.200

20929 1975 　 GOST 20929-75 Plates-blanks of changeable press-moulds for moulding thermoset articles. Construction and dimensions 83.200

20932 1975 　 GOST 20932-75 Loading moulding for loose press-moulds. Construction and dimensions 83.200

20934 1975 　 GOST 20934-75 Units and completes parts for press-moulds for moulding thermoset articles. Specifications 83.200

21546 1988 　 GOST 21546-88 Hammer dies for die forging. General specifications 83.200

22062 1976 　 GOST 22062-76 Injection mould bases with ejector plate. Design and dimensions 83.200

22063 1976 　 GOST 22063-76 Injection mould bases with take-off plate. Desing and dimensions 83.200

22064 1976 　 GOST 22064-76 Injection mould bases with take-off and ejector plate. Design and dimensions 83.200

22065 1976 　 GOST 22065-76 Plate-blanks of injection moulds. Design and dimensions 83.200

22066 1976 　 GOST 22066-76 Clamping plate-blanks of injection moulds. Design and dimensions 83.200

22067 1976 　 GOST 22067-76 Cross-forming ejector plate-blanks of injection moulds. Design and dimensions 83.200

22068 1976 　 GOST 22068-76 Rectangular ejector plate-blanks of injection moulds. Design and dimensions 83.200

22069 1976 　 GOST 22069-76 Cross-forming supporting plate-blanks of injection moulds. Design and dimensions 83.200

22070 1976 　 GOST 22070-76 Rectangular supporting plate-blanks of injection moulds. Design and dimensions 83.200

22071 1976 　 GOST 22071-76 Struts of injection moulds. Desing and dimensions 83.200

22072 1976 　 GOST 22072-76 Guide pins of injection moulds. Design and dimensions 83.200

22073 1976 　 GOST 22073-76 Guide bushings of injection moulds. Design and dimensions 83.200

22074 1976 　 GOST 22074-76 Short guide bushings of injection moulds. Design and dimensions 83.200

22075 1976 　 GOST 22075-76 Locating bushings of injection moulds. Design and dimensions 83.200

22076 1976 　 GOST 22076-76 Supporting disks of injection moulds. Design and dimensions 83.200

22077 1976 　 GOST 22077-76 Sprue bushings of injection moulds. Design and dimensions 83.200

22078 1976 　 GOST 22078-76 Central bushings of injection moulds. Design and dimensions 83.200

22079 1976 　 GOST 22079-76 Shanks of injection moulds. Design and dimensions 83.200

22080 1976 　 GOST 22080-76 Shouldered shanks of injection moulds. Design and dimensions 83.200

22081 1976 　 GOST 22081-76 Flange-blanks of injection moulds. Design and dimensions 83.200

22082 1976 　 GOST 22082-76 Injection mould bases, detail-blanks and details of injection moulds. Specifications 83.200

22476 1977 　 GOST 22476-77 Fixing and securing holes master pattern plates. Design and dimension 83.200

22559 1977 　 GOST 22559-77 Shanks of press-moulds for pressure moulding of thermoset articles. Construction and dimensions 83.200

22560 1977 　 GOST 22560-77 Pushers of composite shanks for press-moulds for pressure moulding of thermoset articles. Construction and dimensions 83.200

22561 1977 　 GOST 22561-77 Tips of composite shanks for press-moulds for pressure moulding of thermoset articles. Construction and dimensions 83.200

22655 1977 　 GOST 22655-77 Moving out and discharge mechanism of two-cassette stationary press moulds. Basic and coupling dimensions 83.200

22656 1977 　 GOST 22656-77 Guides for presses having 600x600 mm heating plates for stationary two-cassete press moulds. Design and dimensions 83.200

22657 1977 　 GOST 22657-77 Pillows for guides and units of stationary two-cassette press moulds. Design and dimensions 83.200

22658 1977 　 GOST 22658-77 Workpiece male dies of packets for two-cassette moulds for manufacturing rubber technical products. Design and dimensions 83.200

22659 1977 　 GOST 22659-77 Shell workpieces of packets for two-cassete moulds for manufacturing rubber technical products. Design and dimensions 83.200

22660 1977 　 GOST 22660-77 Die workpieces of packets for two-cassette moulds for manufacturing rubber technical products. Design and dimensions 83.200

23165 1978 　 GOST 23165-78 Press moulds for industrial rubber articles. Terms and definitions 01.040.83
83.200

24267 1980 　 GOST 24267-80 Plate-blanks of portable press moulds for manufacturing of industrial rubber articles. Design and dimensions 83.200

24268 1980 　 GOST 24268-80 Guide pins of portable press moulds for manufacturing of industrial rubber articles. Design and dimensions 83.200

24269 1980 　 GOST 24269-80 Guide pins of bar press moulds for manufacturing of industrial rubber articles. Design and dimensions 83.200

24270 1980 　 GOST 24270-80 Guide bushings of portable and bar press moulds for manufacturing of industrial rubber articles. Design and dimensions 83.200

24271 1980 　 GOST 24271-80 Joints welding on plates of bar press moulds for manufacturing of industrial rubber articles. Design and dimensions 83.200

24272 1980 　 GOST 24272-80 Roll joints of barr press moulds for manufacturing of industrial rubber articles. Design and dimensions 83.200

24273 1980 　 GOST 24273-80 Hinges for roll joints of bar press moulds for manufacturing of industrial rubber articles. Design and dimensions 83.200

24317 1980 　 GOST 24317-80 Blocks of two-cassette moulds for production of rubber technical parts. Design and dimensions 83.200

24318 1980 　 GOST 24318-80 Blocks of three-cassette moulds for production of rubber technical parts. Design and dimensions 83.200

24319 1980 　 GOST 24319-80 Device for opening and moving out the press moulds. Design and dimensions 83.200

24339 1980 　 GOST 24339-80 Portable multi-impression press moulds for manufacturing rubber-fabric locking rings. Design and dimensions 83.200

24340 1980 　 GOST 24340-80 Portable single-impression press moulds for manufacturing rubber-fabric locking rings. Design and dimensions 83.200

24341 1980 　 GOST 24341-80 Portable multi-impressions press moulds for manufacturing rubber-fabric carrier rings. Design and dimensions 83.200

24342 1980 　 GOST 24342-80 Units of portable multi-impressions press moulds for manufacturing rubber-fabric chevron seals. Design and dimensions 83.200

24343 1980 　 GOST 24343-80 Portable single-impression press moulds for manufacturing rubber-fabric chevron callars. Design and dimensions 83.200

24344 1980 　 GOST 24344-80 Portable single-impression press moulds for manufacturing rubber-fabric locking rings. Design and dimensions 83.200

24345 1980 　 GOST 24345-80 Portable single-impression press-moulds for manufacturing rubber-fabric carrier rings. Design and dimensions 83.200

24401 1980 　 GOST 24401-80 Casting die beams. Construction and dimensions 83.200

24511 1980 　 GOST 24511-80 Block of casette removable press-moulds for rubber-technical articles. Construction and dimensions 83.200

24512 1980 　 GOST 24512-80 Press-moulds multi-placel removable for manufacturing of rubber o-rings section. Construction and dimensions 83.200

24513 1980 　 GOST 24513-80 Press-moulds for manufacturing of rubber o-rings section, executive dimensions of formed articles 83.200

24514 1980 　 GOST 24514-80 Packets quick-changing with conical break of press-moulds for manufacturing of rubber o-rings section. Construction and dimensions 83.200

24515 1980 　 GOST 24515-80 Packets quick-changing with horisontal break of press-moulds for manufacturing of rubber o-rings section with inner diameter from 2,8 up to 9,7 mm. Construction and dimensions 83.200

24516 1980 　 GOST 24516-80 Packets quick-changing with horisontal break of press-moulds for manufacturing of rubber o-rings section. Construction and dimensions 83.200

24517 1980 　 GOST 24517-80 Bushes quidtng quick-changing of press-moulds for manufacturing of rubber technical articles. Construction and dimensions 83.200

24518 1980 　 GOST 24518-80 Columns quiding quick-changing of press-moulds for manufacturing of rubber-technical articles. Construction and dimensions 83.200

24519 1980 　 GOST 24519-80 Sets of cassetta press moulds for producting the rubber toroidal sealing rings. Design and dimensions 83.200

24611 1981 　 GOST 24611-81 Magazine pattern plates. Basic parameters and dimensions 83.200

24829 1981 　 GOST 24829-81 The sets of three casette press moulds for manufacturing of rubber sealing cups. Design and dimensions 83.200

25108 1982 　 GOST 25108-82 Blocks of two casetta press moulds for producing the rubber technical parts on presses with dimensions heating plates 400x400 mm. Design and dimensions 83.200

25109 1982 　 GOST 25109-82 Blocks of three-casetta press moulds for producing the rubber technical parts on presses with dimensions heating plates 400x400 mm. Design and dimensions 83.200

25479 1982 　 GOST 25479-82 Packets of three-cassets press moulds for manufacturing the rubber-fabric chevron cuffs. Design and dimensions 83.200

25480 1982 　 GOST 25480-82 Packets of three-cassets press moulds for manufacturing the rubber-fabric locking rings. Design and dimensions 83.200

25481 1982 　 GOST 25481-82 Packets of three-cassets press moulds for manufacturing the rubber-fabric carrier rings. Design and dimensions 83.200

26297 1984 　 GOST 26297-84 Portable ream press moulds with horizontal break for manufacturing of rubber o-rings section. Design and dimensions 83.200

26298 1984 　 GOST 26298-84 Portable ream press moulds with conical break for manufacturing of rubber o-rings section. Designs and dimensions 83.200

26299 1984 　 GOST 26299-84 Portable single impression press moulds with horizontal break for manufacturing of rubber o-rings section. Design and dimensions 83.200

26608 1985 　 GOST 26608-85 Blocks of two-kassette press moulds for producing the rubber technical parts on presses with heating plates dimensions 800x800 mm. Design and dimensions 83.200

26609 1985 　 GOST 26609-85 Blocks of three-cassette press moulds for producing the rubber technical parts on presses with heating plates dimensions 800x800 mm. Design and dimensions 83.200

26616 1985 　 GOST 26616-85 Sets of portable multi-impression press moulas for manufacturing of rubber u-packing seals. Design and dimensions 83.200

26617 1985 　 GOST 26617-85 Sets of three-cassete press-moulds for manufacturing of rubber u-packing seals. Design and dimensions 83.200

26618 1985 　 GOST 26618-85 Sets of two-casseta press-moulds for manufacturing of rubber u-packing seals. Design and dimensions 83.200

26619 1985 　 GOST 26619-85 Singll-impression press moulds for manufacturing of rubber u-packing seals. Design and dimensions 83.200

26620 1985 　 GOST 26620-85 Sets of portable multi-impression and casseta press-moulds and single impression for manufacturing rubber upacking seals. Executive dimensions of formed articies 83.200

27358 1987 　 GOST 27358-87 Press moulds for manufacturing of plastic articles. General specifications 83.200

29077 1991 　 GOST 29077-91 Press-moulds for manufacturing of industrial rubber articles. Maintenance. Basic principle 83.200

29244 1991 　 GOST 29244-91 Plastics. Small enclosures for coditioning and testing using aqueous solutions to maintain relative humidity at constant value 83.200

50358 1992 　 GOST R 50358-92 Single-screw machines for rubber. Types, basic parameters and dimentions 83.200

50415 1992 　 GOST R 50415-92 Press-moulds for manufacturing of industrial rubber articles. General technical requirements 83.200

Sort Mk 規格番号規格名称(英語) 国際規格分類
( ICSコードの説明 )