| 79 | 
木材工業 |
|---|---|
| 79.020 | 木材の製造プロセス 注: 伐採、木材処理を含む。 注: 木材防腐剤→ 71.100.50 |
| 79.040 | 木材、製材及び製材品 |
| 79.060 | 木材を基にしたパネル |
| 79.080 | ひき材半製品 注: 寄せ木の床、舗装用材、ハンドル等を含む。 |
| 79.100 | コルク及びコルク製品 |
| 79.120 | 木材加工設備 |
| 79.020 | 
木材の製造プロセス注: 伐採、木材処理を含む。 注: 木材防腐剤→ 71.100.50 |
|||
|---|---|---|---|---|
| Sort | Mk | 規格番号 | 規格名称(英語) | 国際規格分類 ( ICSコードの説明 ) |
| 00012-03-014 1990 | GOST 12.3.014-90 | Occupational safety standards system. Manufacture of pressed wood shaving plates. General safety requirement | 13.100
79.060.20 79.020 |
|
| 00012-03-015 1978 | GOST 12.3.015-78 | Occupational safety standards system. Logging operations. Safety requirements | 13.100
79.020 |
|
| 00012-03-034 1984 | GOST 12.3.034-84 | Occupational safety standards system. Wood protection works. General safety requirements | 13.100
79.020 |
|
| 00012-03-042 1988 | GOST 12.3.042-88 | Occupational safety standards system. Woodworking manufacture. General safety requirements | 13.100
79.020 |
|
| 15155 1999 | GOST 15155-99 | Wood products for tropical regions. Protection means and protective parameters | 71.100.50
79.020 |
|
| 16032 1970 | GOST 16032-70 | Timber floating. Terms and definitions | 01.040.79
79.020 |
|
| 17461 1984 | GOST 17461-84 | Technology in logging industry. Terms and definitions | 01.040.79
79.020 |
|
| 17743 1986 | GOST 17743-86 | Technology of woodworking and furniture industry. Terms and definitions | 01.040.79
79.020 |
|
| 18288 1987 | GOST 18288-87 | Manufacture of sawn timber. Terms and definitions | 01.040.79
79.020 |
|
| 20022-01 1990 | GOST 20022.1-90 | Wood protection. Terms and definitions | 01.040.79
79.020 |
|
| 20022-02 1980 | GOST 20022.2-80 | Wood protection. Classification | 79.020 | |
| 20022-03 1975 | GOST 20022.3-75 | Wood preservation. Incising process | 79.020 | |
| 20022-04 1975 | GOST 20022.4-75 | Wood. Preservation. Panel method of impregnation | 79.020 | |
| 20022-05 1975 | GOST 20022.5-75 | Wood. Preservation. Pressure treatment by oily preservatives | 79.020
71.100.50 |
|
| 20022-05 1993 | GOST 20022.5-93 | Wood protection. Pressure treatment by oily protective means | 79.020
71.100.50 |
|
| 20022-07 1982 | GOST 20022.7-82 | Wood protection. Pressure treatment by waterdissolving protectives | 79.020
71.100.50 |
|
| 20022-08 1982 | GOST 20022.8-82 | Wood protection. Method of vacuum-atmospheric pressure-vacuum impregnation | 79.020
71.100.50 |
|
| 20022-09 1976 | GOST 20022.9-76 | Wood. Preservation. Cappillary impregnation. Methods of covering the surface | 79.020
71.100.50 |
|
| 20022-10 1983 | GOST 20022.10-83 | Wood protection. Methods of diffusion treatment | 79.020
71.100.50 |
|
| 20022-14 1984 | GOST 20022.14-84 | Wood protection. Method for determination of moisture content prior to impregnation | 79.020 | |
| 79.040 |
木材、製材及び製材品 |
|||
| Sort | Mk | 規格番号 | 規格名称(英語) | 国際規格分類 ( ICSコードの説明 ) |
| 00078 1989 | GOST 78-89 | [withdrawn]
Wooden sleepers for railways of full gauge. Specifications |
79.040
45.080 |
|
| 00616 1983 | GOST 616-83 | Wooden pit props. Specifications | 79.040
73.100.99 |
|
| 00968 1968 | GOST 968-68 | Sawn timber (bars and boards) for aircraft. Specifications | 79.040 | |
| 01824 1988 | GOST 1824-88 | Elements and assembly units of upper wooden construction of bridging parks. General specifications | 79.040 | |
| 02140 1981 | GOST 2140-81 | Visible defects, of wood. Classification, terms and definitions, methods of measurement | 01.040.79
79.040 |
|
| 02292 1988 | GOST 2292-88 | Round timber. Marking, grading, transportation, methods of measurement and acceptance | 79.040 | |
| 02695 1983 | GOST 2695-83 | Sawn timber of broadleaved species. Specifications | 79.040 | |
| 02708 1975 | GOST 2708-75 | Round timber. Volume tables | 79.040 | |
| 03243 1988 | GOST 3243-88 | Firewood. Specifications | 79.040 | |
| 03808-01 1980 | GOST 3808.1-80 | Coniferous sawn timber. Atmospheric drying and storage | 79.040 | |
| 03934 1971 | GOST 3934-71 | Aircraft wood. Inspection rules and control methods | 79.040
49.025.99 |
|
| 04106 1974 | GOST 4106-74 | Wood for producing tanning extracts. Specifications | 79.040 | |
| 05244 1979 | GOST 5244-79 | Wood shavings. Specifications | 79.040 | |
| 05306 1983 | GOST 5306-83 | Sawn timber and blanks. Tables of volumes | 79.040 | |
| 05780 1977 | GOST 5780-77 | Slabs for fixing mines. Specifications | 79.040
73.100.99 |
|
| 06449-01 1982 | GOST 6449.1-82 | Products of wood and wooden materials. Tolerance zones for linear dimensions and recommended fits | 79.040 | |
| 06449-02 1982 | GOST 6449.2-82 | Products of wood and wooden materials. Tolerances of angles | 79.040 | |
| 06449-03 1982 | GOST 6449.3-82 | Products of wood and wooden materials. Tolerances of form and arrangement of surfaces | 79.040 | |
| 06449-04 1982 | GOST 6449.4-82 | Products of wood and wooden materials. Tolerances of arragement of hole axis for fixing details | 79.040 | |
| 06449-05 1982 | GOST 6449.5-82 | Products of wood and wooden materials. Non-specified limiting deviations and tolerances | 79.040 | |
| 06564 1984 | GOST 6564-84 | Sawn timber and blanks. Rules of acceptance, control methods, marking and transportation | 79.040 | |
| 06663 1974 | GOST 6663-74 | Bark ware for tanning extracts for manufacture. Specifications | 79.040 | |
| 06782-01 1975 | GOST 6782.1-75 | Coniferons sawn timber. Shrinkage value | 79.040 | |
| 06782-02 1975 | GOST 6782.2-75 | Broadleaved sawn timber. Shrinkage value | 79.040 | |
| 07016 1982 | GOST 7016-82 | Products of wood and wooden materials. Parameters of surface roughness | 79.040 | |
| 07307 1975 | GOST 7307-75 | Details from wood and wood materials. Allowances for machining | 79.040 | |
| 07319 1980 | GOST 7319-80 | Sawn timber and blanks of broad-leaved species. Atmospheric drying and storage | 79.040 | |
| 08242 1988 | GOST 8242-88 | Profiled details from wood and wood materials for residential building. Specifications | 79.040
79.080 91.100.99 |
|
| 08440 1974 | GOST 8440-74 | Wood raw material for production of coal for special purposes. Specifications | 79.040 | |
| 08486 1986 | GOST 8486-86 | Coniferous sawn timber. Specifications | 79.040 | |
| 08816 1970 | GOST 8816-70 | [withdrawn]
Wooden cants for switch assemblies of wide gauge railway. Specifications |
79.040
45.080 |
|
| 08992 1975 | GOST 8992-75 | Wooden cants for switch assemblies of the narrow gauge railways. Specifications | 79.040
45.080 |
|
| 08993 1975 | GOST 8993-75 | Wooden sleepers for narrow-gauge railways. Specifications | 79.040
45.080 |
|
| 09014-00 | GOST 9014.0-75 | Round timber. Storage. General requirements | 79.040 | |
| 09014-01 1978 | GOST 9014.1-78 | Round timber. Storing. Protection by the artificial rain irrigation | 79.040 | |
| 09014-02 1979 | GOST 9014.2-79 | Round timber. Storage. Protection by means of waterproof and anticeptic waterproof coatings | 79.040 | |
| 09014-03 1981 | GOST 9014.3-81 | Round timber. Chemical preservation by spraying at storage | 79.040 | |
| 09302 1983 | GOST 9302-83 | Coniferous sawn timber of the Black Sea grading supplied for export. Specifications | 79.040 | |
| 09330 1976 | GOST 9330-76 | Details from wood. Main joints. Types and dimensions | 79.040 | |
| 09371 1990 | GOST 9371-90 | Timber laminated switch sleepers for wide rail track. Specifications | 79.040
45.080 |
|
| 09462 | GOST 9462-88 | Round timber of broad leaved species. Specifications | 79.040 | |
| 09463 | GOST 9463-88 | Round timber of coniferous species. Specifications | 79.040 | |
| 10950 1978 | GOST 10950-78 | Sawn timber and semi-manufactures. Antiseptic methods of immersion | 79.040 | |
| 11368 1989 | GOST 11368-89 | Wood moulding compounds. Specifications | 79.040 | |
| 12431 1972 | GOST 12431-72 | Wood raw material for wood press masses. Specifications | 79.040 | |
| 13338 1986 | GOST 13338-86 | Modified wood. Method for determination of hardness,temporal elastic deformation and residual strain | 79.040 | |
| 13639 1982 | GOST 13639-82 | Parts and products of wood and wooden materials. Method for determination of thickness of transparent varnish coatings | 79.040 | |
| 14644 1986 | GOST 14644-86 | Parts and products of wood and wooden materials. Method for determination of opaque coatings thickness | 79.040 | |
| 15155 1989 | GOST 15155-89 | Wood products for tropical regions. Protection means and protective parameters | 79.040
71.100.50 |
|
| 15612 1985 | GOST 15612-85 | Products of wood and wooden materials. Methods for determining surface roughness parameters | 79.040
79.080 |
|
| 15815 | GOST 15815-83 | Technological chips. Specifications | 79.040 | |
| 15867 1979 | GOST 15867-79 | Details and products of wood and wooden materials. Test method for determining the strength of glued joint for an uneven pilling of facing materials | 79.040 | |
| 16143 1981 | GOST 16143-81 | Parts and products of wood and wooden materials. Method for determination of transporent varnish coating gloss | 79.040 | |
| 16369 1988 | GOST 16369-88 | [withdrawn]
Sawn timber transportation packages. Sizes |
79.040 | |
| 16369 1996 | GOST 16369-96 | Sawn timber transportation packages. Sizes | 79.040 | |
| 16483-00 1989 | GOST 16483.0-89 | Wood. General requirements to physical and mechanical tests | 79.040 | |
| 16483-01 1984 | GOST 16483.1-84 | Wood. Method for determination of density | 79.040 | |
| 16483-02 1970 | GOST 16483.2-70 | Wood. Method for determination of conventional ultimate strength in local compression perpendicular to grain | 79.040 | |
| 16483-03 1984 | GOST 16483.3-84 | Wood. Method of static bending strength determination | 79.040 | |
| 16483-04 1973 | GOST 16483.4-73 | Wood. Methods for determination of impact bending strength | 79.040 | |
| 16483-05 1973 | GOST 16483.5-73 | Wood. Methods for determination of ultimate shearing strength parallel to grain | 79.040 | |
| 16483-06 1980 | GOST 16483.6-80 | Wood. Method of selection of model trees and logs for determination of physical and mechanical properties of wood plantations | 79.040 | |
| 16483-07 1971 | GOST 16483.7-71 | Wood. Methods for determination of moisture content | 79.040 | |
| 16483-09 1973 | GOST 16483.9-73 | Wood. Methods for determination of modulus of elasticity in static bending | 79.040 | |
| 16483-10 1973 | GOST 16483.10-73 | Wood. Methods for determination of ultimate strength in compression parallel the grain | 79.040 | |
| 16483-11 1972 | GOST 16483.11-72 | Wood. Method for determination of conventional ultimate strength in compression perpendicular to grain | 79.040 | |
| 16483-12 1972 | GOST 16483.12-72 | Wood. Method for determination of ultimate strength in shearing perpendicular to grain | 79.040 | |
| 16483-13 1972 | GOST 16483.13-72 | Wood. Method for determination of ultimate strength in cutting perpendicular to grain | 79.040 | |
| 16483-14 1972 | GOST 16483.14-72 | Wood. Methods for swelling testing | 79.040 | |
| 16483-15 1972 | GOST 16483.15-72 | Wood. Determination method of watertightness | 79.040 | |
| 16483-16 1981 | GOST 16483.16-81 | Wood. Method for determination of impact hardness | 79.040 | |
| 16483-17 1981 | GOST 16483.17-81 | Wood. Method for determination of static hardness | 79.040 | |
| 16483-18 1972 | GOST 16483.18-72 | Wood. Method for determination the number of annual rings in 1 cm and content of latewood in an annual ring | 79.040 | |
| 16483-19 1972 | GOST 16483.19-72 | Wood. Determination method of moisture absorption | 79.040 | |
| 16483-20 1972 | GOST 16483.20-72 | Wood determination method of water absorption | 79.040 | |
| 16483-21 1972 | GOST 16483.21-72 | Wood. Methods of testing for determination of physico-mechanical characteristics after technological treatment | 79.040 | |
| 16483-22 1981 | GOST 16483.22-81 | Wood. Method of cleavage strength determination | 79.040 | |
| 16483-23 1973 | GOST 16483.23-73 | Wood. Method for determination of ultimate strength in tension along the grain | 79.040 | |
| 16483-24 1973 | GOST 16483.24-73 | Wood. Determination method of modulus of elasticity in compression along fibres | 79.040 | |
| 16483-25 1973 | GOST 16483.25-73 | Wood. Determination method of modulus of elasticity in commpression across fibres | 79.040 | |
| 16483-26 1973 | GOST 16483.26-73 | Wood. Determination method of modulus of elasticity in tension along fibres | 79.040 | |
| 16483-27 1973 | GOST 16483.27-73 | Wood. Determination method of modulus of elasticity in tension along fibres | 79.040 | |
| 16483-28 1973 | GOST 16483.28-73 | Wood. Method for determination of ultimate tensile strength across the grain | 79.040 | |
| 16483-29 1973 | GOST 16483.29-73 | Wood. Method for determination of factors of cross-sectional deformation | 79.040 | |
| 16483-30 1973 | GOST 16483.30-73 | Wood. Method for determination of modulus of shear | 79.040 | |
| 16483-31 1974 | GOST 16483.31-74 | Wood. Resonance method for determination of modulus of elasticity and shear and decrement vibrations | 79.040 | |
| 16483-32 1977 | GOST 16483.32-77 | Wood. Method for determination of ultimate hygroscopicity | 79.040 | |
| 16483-33 1977 | GOST 16483.33-77 | Wood. Method for determination of resistivity to nail and woodscrew withdrawal | 79.040 | |
| 16483-34 1977 | GOST 16483.34-77 | Wood. Method of gas permeability determination | 79.040 | |
| 16483-35 1988 | GOST 16483.35-88 | Wood. Method for determination of swelling | 79.040 | |
| 16483-37 1988 | GOST 16483.37-88 | Wood. Method for determination shrinkage | 79.040 | |
| 16483-39 1981 | GOST 16483.39-81 | Wood. Method for determination of wear-proofness index | 79.040 | |
| 16588 1991 | GOST 16588-91 | Sawn products and wooden details. Methods for determining moisture content | 79.040 | |
| 16838 1971 | GOST 16838-71 | Parts and products of wood and wooden materials. Method for determination of paint coatings hardness | 79.040 | |
| 16870 1983 | GOST 16870-83 | Removable boards for troops. Specifications | 79.040 | |
| 17231 1978 | GOST 17231-78 | Round timber and splitted timber. Methods for determination of moisture content | 79.040 | |
| 17462 1984 | GOST 17462-84 | Forest industry production. Terms and definitions | 01.040.79
79.040 |
|
| 18288 1977 | GOST 18288-77 | [withdrawn]
Saw-mill industry production. Terms and definitions |
01.040.79
79.040 |
|
| 18320 1978 | GOST 18320-78 | Technological wooden sawdust for hydrolysis. Specifications | 79.040 | |
| 18407 1973 | GOST 18407-73 | Wood. Method for evaluation of electrical strength at a.c. voltage | 79.040 | |
| 18408 1973 | GOST 18408-73 | Wood. Methods for evaluation of electrical resistances at d.c. voltages | 79.040 | |
| 18610 1982 | GOST 18610-82 | Wood. Method of field testing for resistance to putrefaction | 79.040 | |
| 18711 1996 | GOST 18711-96 | Tent wooden members and assembly units. General specifications | 79.040
79.080 |
|
| 18867 1984 | GOST 18867-84 | Coniferous sawn timber. Drying conditions in continious counterflow chambers | 79.040 | |
| 19041 1985 | GOST 19041-85 | Transportation packages and multi-packages of sawn timber. Packaging, marking, transportation and storage | 79.040 | |
| 19720 1974 | GOST 19720-74 | Details and workpieces made of wood and woody materials. Method for determination of resistance of varnish-and-paint coatings to the action of varions temperatures | 79.040 | |
| 19773 1984 | GOST 19773-84 | Sawn timber of coniferous and broad-leaved species. Drying conditions in batch chambers | 79.040 | |
| 20571 1975 | GOST 20571-75 | Modified wood. Method for determination of shock resistance | 79.040 | |
| 21312 1975 | GOST 21312-75 | Modified wood. Method for determination of pressure in swelling | 79.040 | |
| 21313 1975 | GOST 21313-75 | Modified wood. Method for determination of linear swelling | 79.040 | |
| 21523-01 1993 | GOST 21523.1-93 | Modified wood. Method for determination of stregth of bushes | 79.040 | |
| 21523-02 1993 | GOST 21523.2-93 | Modified wood. Method for determination of rigidity of bushes | 79.040 | |
| 21523-03 1987 | GOST 21523.3-87 | Modified wood. Method for determination of thermal conductivity, heat conductivity and heat capacity | 79.040 | |
| 21523-03-01 1993 | GOST 21523.3.1-93 | Modified wood. Method for determination of heat capacity | 79.040 | |
| 21523-03-02 1993 | GOST 21523.3.2-93 | Modified wood. Method for determination of heat conductivity | 79.040 | |
| 21523-04 1977 | GOST 21523.4-77 | Modified wood. Method for determination of moisture content | 79.040 | |
| 21523-05 1977 | GOST 21523.5-77 | Modified wood. Method for determination of water absorption | 79.040 | |
| 21523-06 1977 | GOST 21523.6-77 | Modified wood. Method for determination of moisture absorbtion | 79.040 | |
| 21523-07 1987 | GOST 21523.7-87 | Modified wood. Method for determination of modulus of elasticity in static bending | 79.040 | |
| 21523-08 1987 | GOST 21523.8-87 | Modified wood. Method for determination of modulus of elasticity in compression | 79.040 | |
| 21523-08 1993 | GOST 21523.8-93 | Modified wood. Method for determination of modulus of elasticity in compression | 79.040 | |
| 21523-09 1987 | GOST 21523.9-87 | Modified wood. Method for determination of modulus of elasticity in tension | 79.040 | |
| 21523-10 1988 | GOST 21523.10-88 | Modified wood. Method for determination of wear-proofness | 79.040 | |
| 21523-11 1979 | GOST 21523.11-79 | Modified wood. Method of density determination | 79.040 | |
| 21554-01 1981 | GOST 21554.1-81 | Sawn timber and blanks. Methods for determination of modulus of elasticity in static bending | 79.040 | |
| 21554-02 1981 | GOST 21554.2-81 | Sawn timber and blanks. Method for determination of ultimate strength in static bending | 79.040 | |
| 21554-03 1982 | GOST 21554.3-82 | Sawn timber and blanks. Method for control of strength at bending, tension and compression | 79.040 | |
| 21554-04 1978 | GOST 21554.4-78 | Sawn timber and semi-manufactures. Method for determining the ultimate strength in comression parallel to grain | 79.040 | |
| 21554-05 1978 | GOST 21554.5-78 | Sawn timber and semi-manufactures. Method for determining the ultimate strength in tension parallel to grain | 79.040 | |
| 21554-06 1978 | GOST 21554.6-78 | Sawn timber and semi-manufactures. Method for determining the ultimate strength in shearing parallel to grain | 79.040 | |
| 21554-07 1978 | GOST 21554.7-78 | Sawn timber and semi-manufactures. Method of determination of ultimate strength in bearing perpendicular | 79.040 | |
| 21769 1984 | GOST 21769-84 | Tree verdure. Specifications | 79.040 | |
| 22296 1989 | GOST 22296-89 | Pulpwood for export. Specifications | 79.040 | |
| 22297 1976 | GOST 22297-76 | Coniferous pitprops for export. Technical requirements | 79.040
73.100.99 |
|
| 22298 1976 | GOST 22298-76 | Coniferous saw logs for export. Technical requirements | 79.040 | |
| 22299 1976 | GOST 22299-76 | Broad-leaved sawlogs for export. Technical requirements | 79.040 | |
| 22830 1977 | GOST 22830-77 | Wooden sleepers for the Underground. Specifications | 79.040 | |
| 23246 1978 | GOST 23246-78 | Crushed wood. Terms and definitions | 01.040.79
79.040 |
|
| 23431 1979 | GOST 23431-79 | Wood. Structure and physico-mechanical properties. Terms and definitions | 01.040.79
79.040 |
|
| 23551 1979 | GOST 23551-79 | Wooden raw materials for manufacturing modified wood. Specifications | 79.040 | |
| 23827 1979 | GOST 23827-79 | Thin wood raw material. Specifications | 79.040 | |
| 23944 1980 | GOST 23944-80 | Modified wood. Terms and definitions | 01.040.79
79.040 |
|
| 24260 1980 | GOST 24260-80 | Wood raw material for pirolysis and charring. Specifications | 79.040 | |
| 24329 1980 | GOST 24329-80 | Modificated wood. Modification methods | 79.040 | |
| 24454 1980 | GOST 24454-80 | Coniferons sawn timber. Sizes | 79.040 | |
| 25458 1982 | GOST 25458-82 | Wood (timber) posts for road signs. Specifications | 79.040 | |
| 25579 1983 | GOST 25579-83 | Modified wood. Method for determination of dimensions stability | 79.040 | |
| 26002 1983 | GOST 26002-83 | Coniferous sawn timber of northern grading supplied for export. Specifications | 79.040 | |
| 26214 1984 | GOST 26214-84 | Products of wood and wooden materials. Permissible errors in measuring linear dimensions | 79.040 | |
| 27736 1988 | GOST 27736-88 | Method of determing impact resistance of protective and decorative coating elements and production of wood and wooden materials | 79.040 | |
| 27820 1988 | GOST 27820-88 | Elements, products of wood and wooden materials. Method for determining resistance to wear of protective and decorative coatings | 79.040 | |
| 28067 1989 | GOST 28067-89 | Elements and articles of wood and wooden materials. Method for determining contact thermal resistance of protective and decorative coatings | 79.040 | |
| 28450 1990 | GOST 28450-90 | Wooden bridge beams. Specifications | 79.040 | |
| 28469 1990 | GOST 28469-90 | Wooden laminated sleepers and cants for tram lines. Specifications | 79.040 | |
| 30567 1998 | GOST 30567-98 | Modified wood. Method fod determination of toxicity | 79.040 | |
| 50054 1992 | GOST R 50054-92 | Bridge timbers laminated beams. Specifications | 79.040 | |
| 50078 1992 | GOST R 50078-92 | Modified wood. Method for determination of rigidity of bushes | 79.040 | |
| 50079 1992 | GOST R 50079-92 | Modified wood. Method for determination of stregth of bushes | 79.040 | |
| 50236 1992 | GOST R 50236-92 | Modified wood. Method for determination of modulus of elasticity in compression | 79.040 | |
| 50237 1992 | GOST R 50237-92 | Modified wood. Method for determination of heat capacity | 79.040 | |
| 50238 1992 | GOST R 50238-92 | Modified wood. Method for determination of heat conductivity | 79.040 | |
| 50801 1995 | GOST R 50801-95 | Wood raw material, forest products, semi-produced materials and wood products. Sampling rules and methods of measuring specific activity of radionuclides | 79.040 | |
| 52117 2003 | GOST R 52117-2003 | Round timber. Methods of measurements | 79.040 | |
| 79.060 |
木材を基にしたパネル |
|||
| Sort | Mk | 規格番号 | 規格名称(英語) | 国際規格分類 ( ICSコードの説明 ) |
| 00004-207 1979 | GOST 4.207-79 | Quality rating system. Building. Fibre board. Nomenclature of characteristics | 79.060.20
03.120 |
|
| 00010-55 1971 | GOST 10.55-71 | Birch plywood. Tehnical requirements for export products | 79.060.10 | |
| 00012-03-014 1990 | GOST 12.3.014-90 | Occupational safety standards system. Manufacture of pressed wood shaving plates. General safety requirement | 13.100
79.060.20 79.020 |
|
| 00099 1989 | GOST 99-89 | Cut veneer. Specifications | 79.060.10 | |
| 00099 1996 | GOST 99-96 | Cut veneer. Specifications | 79.060.10
79.080 |
|
| 00102 1975 | GOST 102-75 | Birch plywood for aircraft. Specifications | 79.060.10
49.025.99 |
|
| 03916-01 1989 | GOST 3916.1-89 | [withdrawn => GOST 3916.1-96]
Plywood with outer layers of deciduous veneer for general use. Specifications |
79.060.10 | |
| 03916-01 1996 | GOST 3916.1-96 | Plywood with outer layers of deciduous veneer for general use. Specifications | 79.060.10 | |
| 03916-02 1989 | GOST 3916.2-89 | [withdrawn => GOST 3916.2-96]
Plywood with outer layers of coniferous veneer for general use. Specifications |
79.060.10 | |
| 03916-02 1996 | GOST 3916.2-96 | Plywood with outer layers of coniferous veneer for general use. Specifications | 79.060.10 | |
| 04598 1986 | GOST 4598-86 | Fibre boards. Specifications | 79.060.20 | |
| 08673 1993 | GOST 8673-93 | Plywood panels. Specifications | 79.060.10 | |
| 08904 1981 | GOST 8904-81 | Hard wood-fibre boards with varnish and paint coatings. Specifications | 79.060.20 | |
| 09620 1972 | GOST 9620-72 | Laminated glued wood. Sampling and general requirements in testing | 79.060.10 | |
| 09620 1994 | GOST 9620-94 | Laminated glued wood. Sampling and general requirements in testing | 79.060.10 | |
| 09621 1972 | GOST 9621-72 | Laminated glued wood. Methods for determination of physical properties | 79.060.10 | |
| 09622 1987 | GOST 9622-87 | Laminated glued wood. Methods for determination of ultimate strenght and modulus of elasticity in tension | 79.060.10 | |
| 09623 1987 | GOST 9623-87 | Laminated glued wood. Method for determination of ultimate strength and modulus of elasticity in compression | 79.060.10 | |
| 09624 1993 | GOST 9624-93 | Laminated glued wood method for determination of shear strength | 79.060.10 | |
| 09625 1987 | GOST 9625-87 | Laminated glued wood. Method for determination of strength and elasticity module in static bending | 79.060.10 | |
| 09626 1990 | GOST 9626-90 | Laminated glued wood. Method for determination of impact viscosity in bending | 79.060.10 | |
| 09627-01 1975 | GOST 9627.1-75 | Glued plywood. Method for determination of hardness | 79.060.10 | |
| 09627-02 1975 | GOST 9627.2-75 | Glued plywood. Method for determination of heat resistance | 79.060.10 | |
| 09627-03 1975 | GOST 9627.3-75 | Glued plywood. Method for determination of oil resistances | 79.060.10 | |
| 10632 1989 | ★ | GOST 10632-89 | [withdrawn]
Wood particle boards. Specifications |
79.060.20 |
| 10632 2007 | ★ | GOST 10632-2007 | Wood particle boards. Specifications | 79.060.20 |
| 10633 1978 | GOST 10633-78 | Wood particle boards. General requirements in testing physical and mechanical properties | 79.060.20 | |
| 10634 1988 | GOST 10634-88 | Wood particle boards. Methods of determination of physical properties | 79.060.20 | |
| 10635 1988 | GOST 10635-88 | Wood particle boards. Methods for determination of ultimate strength and modulus of elasticity in bendind | 79.060.20 | |
| 10636 1990 | GOST 10636-90 | Wood particle boards. Method for determination of ultimate tensile strength perpendicular to board face | 79.060.20 | |
| 10637 1978 | GOST 10637-78 | Wood particle boards. Method for determination of resistivity to nail and wood screw withdrawal | 79.060.20 | |
| 11539 1983 | GOST 11539-83 | Bakelite resins plywood. Specifications | 79.060.10 | |
| 11842 1976 | GOST 11842-76 | Wood particle boards. Method for determination of resilience | 79.060.20 | |
| 11843 1976 | GOST 11843-76 | Wood particle boards. Method for determination of hardness | 79.060.20 | |
| 13715 1978 | GOST 13715-78 | Glued boards. Specifications | 79.060.20 | |
| 13913 1978 | GOST 13913-78 | Laminated wood plastics. Specifications | 79.060.10 | |
| 14614 1979 | GOST 14614-79 | Plywood plus. Specifications | 79.060.10 | |
| 15613-01 1984 | GOST 15613.1-84 | Glued massive wood. Methods for determination of glued joint of ultimate strength while shearing palong grain | 79.060.10 | |
| 15613-02 1977 | GOST 15613.2-77 | Massive glued wood. Method for determination of glued joint cleavage strength | 79.060.10 | |
| 15613-03 1977 | GOST 15613.3-77 | Massive glued wood. Method for determination of ultimate strength in tension of glued butt joint | 79.060.10 | |
| 15613-04 1978 | GOST 15613.4-78 | Glued massive wood. Methods for determining the ultimate strength of serrate glued joints in static bending | 79.060.10 | |
| 15613-05 1979 | GOST 15613.5-79 | Glued massive wood. Method for determination of ultimate tensile strength of finger glued joints | 79.060.10 | |
| 15812 1987 | GOST 15812-87 | Laminated wood. Terms and difinitions | 01.040.79
79.060.10 |
|
| 18066 1972 | GOST 18066-72 | Laminated glued wood. Method of determining bending ability | 79.060.10 | |
| 18068 1972 | GOST 18068-72 | Laminated glued wood. Method of determining linear dimension changes in accordance with relative humidity | 79.060.10 | |
| 18110 1972 | GOST 18110-72 | Wood particle boards. Technology. Terms and definitions | 01.040.79
79.060.20 |
|
| 18446 1973 | GOST 18446-73 | Glued wood. Evaluation method of heat and frost resistance of adhesive joints | 79.060.10 | |
| 19100 1973 | GOST 19100-73 | Glued wood. Method of testing of glued points weatherability | 79.060.10 | |
| 19592 1980 | GOST 19592-80 | Fibre boards. Test methods | 79.060.20 | |
| 20966 1975 | GOST 20966-75 | Laminated wood plastic, type ДСП-Б-a. Specifications | 79.060.10 | |
| 21178 1975 | GOST 21178-75 | Bent and glued blanks. Specifications | 79.060.10 | |
| 23234 1978 | GOST 23234-78 | Wood particle boards. Method for determination of resistivity to separation of surface layer in direction normal to a plance | 79.060.20 | |
| 24053 1980 | GOST 24053-80 | Wood particle boards. Method for determination of warpage | 79.060.20 | |
| 26988 1986 | GOST 26988-86 | Fibre board. Method for determination of ultimate tensile strength perpendicular to board face | 79.060.20 | |
| 27678 1988 | GOST 27678-88 | Wood particle boads. Perforatory method for determining formaldehyde content | 79.060.20 | |
| 27680 1988 | GOST 27680-88 | Particle and fibre boards. Methods of shape and dimensions control | 79.060.20 | |
| 27812 1988 | GOST 27812-88 | [withdrawn]
Solid glued wood. Method of testing glued joints for resistance to delamination |
79.060.10 | |
| 27935 1988 | GOST 27935-88 | Fibre and wood particle boards terms and definitions | 01.040.79
79.060.20 |
|
| 30427 1996 | GOST 30427-96 | Plywood for general use. Classification of veneer surfaces by appearance | 79.060.10 | |
| 52078 2003 | GOST R 52078-2003 | Wood particle boards, laminated with paper impregnated with thermosetting resins | 79.060.20 | |
| 79.080 |
ひき材半製品 注: 寄せ木の床、舗装用材、ハンドル等を含む。 |
|||
| Sort | Mk | 規格番号 | 規格名称(英語) | 国際規格分類 ( ICSコードの説明 ) |
| 00004-223 1983 | GOST 4.223-83 | Quality ratings system. Building. Parquet articles. Nomenclature of characteristics | 79.080 | |
| 00048 1991 | GOST 48-91 | Blank for skies. Specifisations | 79.080 | |
| 00099 1996 | GOST 99-96 | Cut veneer. Specifications | 79.060.10
79.080 |
|
| 00862-01 1985 | GOST 862.1-85 | Floor parquet production. Block parquet. Technical requirements | 79.080 | |
| 00862-02 1985 | GOST 862.2-85 | Floor parquet products. Mosaic parquet. Technical requirements | 79.080 | |
| 00862-03 1986 | GOST 862.3-86 | Floor parquet products. Parquet boards. Technical requirements | 79.080 | |
| 00862-04 1987 | GOST 862.4-87 | Floor parquet products. Parquet panels. Technicel requipements | 79.080 | |
| 01400 1991 | GOST 1400-91 | Handles for builder's axes. Specifications | 79.080 | |
| 02646 1971 | GOST 2646-71 | Coniferous timber blanks for aircraft. Specifications | 79.080
49.025.99 |
|
| 02800 1983 | GOST 2800-83 | Blanks for wooden details of cart wheels. Specifications | 79.080 | |
| 02977 1982 | GOST 2977-82 | Planed veneer. Specifications | 79.080 | |
| 02996 1979 | GOST 2996-79 | Blanks of broad-leaved species for aviation. Specifications | 79.080 | |
| 04971 1976 | GOST 4971-76 | Stabe billets for wooden barrels for beer. Specifications | 79.080 | |
| 07897 1983 | GOST 7897-83 | Deciduous timber blanks. Specifications | 79.080 | |
| 08242 1988 | GOST 8242-88 | Profiled details from wood and wood materials for residential building. Specifications | 79.040
79.080 91.100.99 |
|
| 08821 1975 | GOST 8821-75 | Staves for wooden barrels for dry and liquid products. Specifications | 79.080 | |
| 09629 1981 | GOST 9629-81 | Blanks of modified wood. Specifications | 79.080 | |
| 09685 1961 | GOST 9685-61 | Coniferous timber blanks. Specifications | 79.080 | |
| 12457 1977 | GOST 12457-77 | Wood blanks for oars. Specifications | 79.080 | |
| 14201 1983 | GOST 14201-83 | Tall oil resin. Specifications | 71.080
79.080 |
|
| 15612 1985 | GOST 15612-85 | Products of wood and wooden materials. Methods for determining surface roughness parameters | 79.040
79.080 |
|
| 16361 1987 | GOST 16361-87 | Wood flour. Specifications | 79.080 | |
| 16362 1986 | GOST 16362-86 | Wood flour. Test methods | 79.080 | |
| 16424 1983 | GOST 16424-83 | Blanks for sporting and hunting shooting gun stocks. Specifications | 79.080 | |
| 17218 1971 | GOST 17218-71 | Active carbons. Method for determination of protective action time by benzene | 71.080
79.080 |
|
| 17219 1971 | GOST 17219-71 | Active carbons. Method for determination of summary pore volume by the moisture capacity test | 71.080
79.080 |
|
| 18711 1973 | GOST 18711-73 | Tents. Wooden parts. General technical requirements | 79.080 | |
| 18711 1996 | GOST 18711-96 | Tent wooden members and assembly units. General specifications | 79.040
79.080 |
|
| 19414 1990 | GOST 19414-90 | Solid glued wood. General requirements for glued finger joints | 79.080 | |
| 19921 1974 | GOST 19921-74 | Glued and bent blanks. Method of determining ultimate strength in static bending | 79.080 | |
| 19922 1974 | GOST 19922-74 | Wood. Glued and bent blanks. Method of determining ultimate strength of glue jointing between bosses and veneer in trapezoid frames of chairs | 79.080 | |
| 20800 1975 | GOST 20800-75 | Rotary cut veneer. Test methods | 79.080 | |
| 21533 1976 | GOST 21533-76 | Wood chemical products. Method of test by gas chromatography | 71.080
79.080 |
|
| 23863 1979 | GOST 23863-79 | Wood chemical products. Methods for determination of the softening temperature | 71.080
79.080 71.100.99 |
|
| 24588 1981 | GOST 24588-81 | Blanks of modified wood. Marks and dimensions | 79.080 | |
| 27325 1987 | GOST 27325-87 | Products and elements of wood and wooden materials. Method of determination of varnish-and-paint coating adhesion | 79.080 | |
| 27326 1987 | GOST 27326-87 | Products and elements of wood and wooden materials. Method of determination of hardneess to scratching protective and decorative coatings | 79.080 | |
| 27627 1988 | GOST 27627-88 | Products and elements of wood and wooden materials. Determination of resistance of protective and decorative coatings to spot formation | 79.080 | |
| 52484 2005 | GOST R 52484-2005 | Souvenir matches. General specifications | 79.080 | |
| 79.120 |
木材加工設備 |
|||
| Sort | Mk | 規格番号 | 規格名称(英語) | 国際規格分類 ( ICSコードの説明 ) |
| 00004-404 1988 | GOST 4.404-88 | Product-quality index system. Woodworking machines. Nomenclature of indices | 03.120
79.120 |
|
| 00004-442 1986 | GOST 4.442-86 | Product-quality index system. Metal-and wood-cutting tools. Index nomenclature | 03.120
25.100 79.120.20 |
|
| 00012-02-026-00 1977 | GOST 12.2.026.0-77 | Occupational safety standards system. Wood working equipment. General safety construction requirements | 13.100
79.120 |
|
| 00012-02-026-00 1993 | GOST 12.2.026.0-93 | Woodworking equipment. Safety requirements for construction | 79.120.10 | |
| 00012-02-026-01 1980 | GOST 12.2.026.1-80 | Occupational safety standards system. Wood working equipment. Vertical timber frames. Safety requirements | 13.100
79.120 |
|
| 00012-02-026-02 1980 | GOST 12.2.026.2-80 | Occupational safety standards equipment. Planing machines. Safety requirements for construction | 13.100
79.120.10 |
|
| 00012-02-026-03 1980 | GOST 12.2.026.3-80 | Occupational safety standards system. Wood working equipment. Shapers. Safety requirements for construction | 13.100
79.120.10 |
|
| 00012-02-026-04 1980 | GOST 12.2.026.4-80 | Occupational safety standards system. Wood working equipment. Drilling machines and mortisers. Safety requirements | 13.100
79.120.10 |
|
| 00012-02-026-05 1980 | GOST 12.2.026.5-80 | Occupational safety standards system. Wood-working equipment. Tenoning machines. Safety requirements | 13.100
79.120.10 |
|
| 00012-02-026-06 1980 | GOST 12.2.026.6-80 | Occupational safety standards system. Wood working equipment. Combined and universal machines. Safety requirements | 13.100
79.120.10 |
|
| 00012-02-026-07 1980 | GOST 12.2.026.7-80 | Occupational safety standards system. Wood working equipment. Sanding machines. Safety requirements for construction | 13.100
79.120.10 |
|
| 00012-02-026-08 1980 | GOST 12.2.026.8-80 | Occupational safety standards system. Wood working equipment. Rotaty barking machines. Safety requirements | 13.100
79.120.10 |
|
| 00012-02-026-09 1980 | GOST 12.2.026.9-80 | Occupational safety standards system. Wood working equipment. Veneer-cutting lathes. Safety requirements | 13.100
79.120.10 |
|
| 00012-02-026-10 1980 | GOST 12.2.026.10-80 | Occupational safety standards system. Wood working equipment. Veneer taping machines. Safety requirements | 13.100
79.120.10 |
|
| 00012-02-026-11 1981 | GOST 12.2.026.11-81 | Occupational safety standards system. Wood working equipment. Circular saws. Safety requirements | 13.100
79.120.10 |
|
| 00012-02-026-12 1981 | GOST 12.2.026.12-81 | Occupational safety standards system. Wood working equipment. Venner colipper. Safety requirements | 13.100
79.120.10 |
|
| 00012-02-026-13 1981 | GOST 12.2.026.13-81 | Occupational safety standards system. Wood working equipment. Lathes and ronding machines. Safety requirements | 13.100
79.120.10 |
|
| 00012-02-026-14 1981 | GOST 12.2.026.14-81 | Occupational safety standards system. Wood working equipment. Polishing drum machines. Safety requirements | 13.100
79.120.10 |
|
| 00012-02-026-15 1981 | GOST 12.2.026.15-81 | Occupational safety standards system. Wood working equipment. Glue spredding machines. Safety requirements | 13.100
79.120.10 |
|
| 00012-02-026-16 1981 | GOST 12.2.026.16-81 | Occupational safety standards system. Wood working equipment. Curtaing cooting machines. Safety requirements | 13.100
79.120.10 |
|
| 00012-02-026-17 1982 | GOST 12.2.026.17-82 | Occupational safety standards system. Wood working equipment. Vertical log band sawing machines. Safety requirements for design | 13.100
79.120.10 |
|
| 00012-02-026-18 1983 | GOST 12.2.026.18-83 | Occupational safety standards system. Wood working equipment. Table band saws. Safety requirements of construction | 13.100
79.120.10 |
|
| 00012-02-026-19 1983 | GOST 12.2.026.19-83 | Occupational safety standards system> machinery for wood particle board production. Construction safety requirements | 13.100
79.120.10 |
|
| 00012-02-026-20 1984 | GOST 12.2.026.20-84 | Occupational safety standards system. Wood working equipment. Machines for connections by nails. Safety requirements for equipment | 13.100
79.120.10 |
|
| 00012-02-026-21 1985 | GOST 12.2.026.21-85 | Occupational safety standards system. Match making machines and lines. Construction safety requirements | 13.100
79.120.10 |
|
| 00012-02-104 1984 | GOST 12.2.104-84 | Occupational safety standards system. Portable forestry equipment. General safety requirements | 13.100
79.120.20 |
|
| 00069-1975 | GOST 69-75 | Woodworking equipment. Shaper with lower spindle. Standards of accuracy and rigity | 79.120.10 | |
| 00700 | GOST 700-82 | Circular rip saws. Basic parameters and dimensions | 79.120.10 | |
| 00980 1980 | GOST 980-80 | Flat disk saws for wood sawing. Specifications | 79.120.20 | |
| 05524 1975 | GOST 5524-75 | Saws for vertical gang mills | 79.120.20 | |
| 05645 1976 | GOST 5645-76 | Woodworking equipment. Lathes. Basic parameters | 79.120.10 | |
| 05945 1972 | GOST 5945-72 | Woodworking jointing machines. Basic parameters | 79.120.10 | |
| 06532 1977 | GOST 6532-77 | Band saws for sawing of wood. Specifications | 79.120.20 | |
| 06567 1975 | GOST 6567-75 | Flat knifes with rectangular cutter edge for wood shaping | 79.120.20 | |
| 06735 1973 | GOST 6735-73 | Shapers. Basic parameters and dimensions | 79.120.10 | |
| 06854 1988 | GOST 6854-88 | Woodworking equipment. Bandsawing machines. Basic parameters standards of accuracy | 79.120.10 | |
| 06855 1988 | GOST 6855-88 | Woodworking equipment. Frame tenoning machines. Basic parameters. Standards of accuracy. Terminology | 79.120.10 | |
| 07035 1975 | GOST 7035-75 | Metal-cutting and wood-working machines. General conditions for testing of machine tool rigidity | 25.080
79.120.10 |
|
| 07097 1978 | GOST 7097-78 | Woodworking equipment. Jointing machines. Standard of accuracy | 79.120.10 | |
| 07228 1993 | GOST 7228-93 | Woodworking equipment. Thicknessing machines. Basic parameters. Norms of accuracy and rigidity | 79.120.10 | |
| 07315 1992 | GOST 7315-92 | Woodworkig machinery. Four-sided planers. Basic parameters. Norms of accuracy and rigidity | 79.120.10 | |
| 07353 1990 | GOST 7353-90 | Woodworking equipment. Drilling-grooving machines. Basic parameters. Norms of accuracy | 79.120.10 | |
| 08197 1979 | GOST 8197-79 | Woodworking drum sanding machines. Basic parameters | 79.120.10 | |
| 08425 1990 | GOST 8425-90 | Woodworking machinery. Circular rip saws. Basic parameters. Norms of accuracy and rigidity | 79.120.10 | |
| 08629 1975 | GOST 8629-75 | Woodworking equipment. Spindle's nases of drilling and drilling-grooving machines. Jointing dimensions | 79.120.10 | |
| 08994 1980 | GOST 8994-80 | Milling cutters for woodworking. Specifications | 79.120.20 | |
| 09091 1975 | GOST 9091-75 | Woodworking drilling and drilling-grooving machines. Collets. Basic dimensions | 79.120.10 | |
| 09335 1989 | GOST 9335-89 | Woodworking machinery. Circular sawing machines for cross sawing of sawn-timber. Basic parameters. Norms of accuracy | 79.120.10 | |
| 09556 1983 | GOST 9556-83 | Woodworking equipment. Band flat grinding machines, basic parameters | 79.120.10 | |
| 09769 1979 | GOST 9769-79 | Wood-working carbide-tipped circular saws. Specifications | 79.120.20 | |
| 10131 1993 | GOST 10131-93 | Occupational safety standards system. Wood working equipment. Rotaty barking machines. Safety requirements | 13.100
79.120.10 |
|
| 10294 1990 | GOST 10294-90 | Woodworking equipment. Vertical two-story saw frames. Basic parameters. Standards of accuracy | 79.120.10 | |
| 10295 1990 | GOST 10295-90 | Woodworking equipment. Vertical one-story saw frames. Basic parameters. Standards of accuracy | 79.120.10 | |
| 10482 1974 | GOST 10482-74 | Saws for packing gang mills. Specifications | 79.120.20 | |
| 11019 1989 | GOST 11019-89 | Woodworking equipment. Circular-sawing machines for lumber. Ends of spindles and flanges. Basic dimensions | 79.120.10 | |
| 11290 1980 | GOST 11290-80 | Woodworking disk grooving cutters | 79.120.20 | |
| 11291 1981 | GOST 11291-81 | Carbide and HSS tipped woodwoving grooving cutters. Specifications | 79.120.20 | |
| 11968 1978 | GOST 11968-78 | Woodworking equipment. Drum santing machine. Standards of accuracy | 79.120.10 | |
| 12588 1981 | GOST 12588-81 | Logging electrometor cutters. Types and main parameters | 79.120.20 | |
| 13235 1979 | GOST 13235-79 | Relived woodworking cutters for tongue and groovs cutting. Design and dimensions | 79.120.20 | |
| 13833 1977 | GOST 13833-77 | Plates of hard alloys for wood cutting disk saws. Design and dimensions | 77.160
79.120.20 |
|
| 13834 1977 | GOST 13834-77 | Plates of hard alloys for milling and drilling wood cutting tools. Design and dimensions | 77.160
79.120.20 |
|
| 13932 1980 | GOST 13932-80 | Shell type inserted bead circular cutter blocks for woodcutting. Specifications | 79.120.20 | |
| 14044 1993 | GOST 14044-93 | Woodworking equipment. Pattern milling machines. Basis parameters and dimensions. Norms of accuracy | 79.120.10 | |
| 14951 1979 | GOST 14951-79 | Woodworking equipment. One blade circular sawing machines for round timbers cross cutting. Basic parameters | 79.120.10 | |
| 14956 1979 | GOST 14956-79 | Shell type inserted beade circular cutterbloks for woodcutting. Types. Main parameters and dimensions | 79.120.20 | |
| 15814 1970 | GOST 15814-70 | Equipment, tools and apparatus for the production of laminated wood. Terms and definitions | 01.040.79
79.120.99 |
|
| 15987 1991 | GOST 15987-91 | Wooden bodied planes. Specifications | 79.120.20 | |
| 15995 1970 | GOST 15995-70 | Combined and universal machines. Basic parameters and dimensions | 79.120.10 | |
| 16021 1990 | GOST 16021-90 | Woodworking equipment. Rotary barking machines. Basic parameters. Standards of acuracy | 79.120.10 | |
| 16543 1971 | GOST 16543-71 | Edgihg saws. Basic parameters | 79.120.10 | |
| 17214 1990 | GOST 17214-90 | Woodworking equipment. Glue-spreading rooller machines. Basic parameters. Standards of accuracy | 79.120.10 | |
| 17735 1972 | GOST 17735-72 | Woodworking equipment. Veneer guillotine shears. Basic parameters | 79.120.20 | |
| 18479 1973 | GOST 18479-73 | Planer-type circular saws for sawing of wood. Technical conditions | 79.120.20 | |
| 18480 1973 | GOST 18480-73 | Relived woodworking cutters with rear teeth for rebating | 79.120.20 | |
| 18578 1989 | GOST 18578-89 | Builders axes. Specifications | 79.120.20 | |
| 19506 1974 | GOST 19506-74 | Wood particle boards manufacture equipment and control devices. Terms and definitions | 01.040.79
79.120 |
|
| 21893 1976 | GOST 21893-76 | Woodcutting relieved milling cutters for radius machining. Design and dimensions | 79.120.20 | |
| 22053 1976 | GOST 22053-76 | Woodcutting twist drills with centre and undercutters. Specifications | 79.120.20 | |
| 22057 1976 | GOST 22057-76 | Woodcutting twist drills. Technical conditions | 79.120.20 | |
| 22984 1978 | GOST 22984-78 | Woodworking equipment. Curtain coating machines. Basic parameters | 79.120.99 | |
| 23183 1978 | GOST 23183-78 | Edging circular sawing machines. Standards of accuracy | 79.120.10 | |
| 23726 1979 | GOST 23726-79 | Metalcutting tools. Acceptance | 25.100
79.120.20 |
|
| 24609 1981 | GOST 24609-81 | Woodworking equipment. Curtain coating. Standards of accurdcy | 79.120.99 | |
| 24610 1991 | GOST 24610-91 | Woodworking equipment. Rotary saws for panel and sheet material. Basic parameters. Standards of accuracy | 79.120.10 | |
| 25121 1982 | GOST 25121-82 | Woodworking machinery. Circular rip saws. Standards of accuracy | 65.060.80
79.120.10 |
|
| 25135 1982 | GOST 25135-82 | Woodworking machinery. Vertical log band saws. Standards of accuracy | 79.120.10 | |
| 25223 1982 | GOST 25223-82 | Wood-working machines. General specifications | 79.120.10 | |
| 25338 1991 | GOST 25338-91 | Woodworking equipment. Accuracy and rigidity test. General requirements | 79.120 | |
| 25507 1982 | GOST 25507-82 | Woodworking equipment surface planers and thicknessers. Basic parameters | 79.120.10 | |
| 25508 1982 | GOST 25508-82 | Woodworking equipment. The mandrels of the shapers with lower spindles. Joinig dimensins | 79.120.10 | |
| 25510 1982 | GOST 25510-82 | Woodworking equipment. The ends of spindles of tenoning machines of frame structures. Joining dimensions | 79.120.10 | |
| 25514 1982 | GOST 25514-82 | Woodworking equipment. The ends of the spindles of four side planing machines. Joining dimensions | 79.120.10 | |
| 25602 1983 | GOST 25602-83 | Stocks with interchangable heads. Basic dimensions | 79.120.20 | |
| 26215 1984 | GOST 26215-84 | Hand-saws. Specifications | 79.120.20 | |
| 26583 1985 | GOST 26583-85 | Maintenance system for technological equipment of engineering workr. Metalcutting, forge-and-pressing, casting and woodwirking operational and | 01.110
03.080.10 25.020 79.120 |
|
| 26665 1991 | GOST 26665-91 | Metal bodied planes. Technical specifications | 25.140.30
79.120.20 |
|
| 26665 1997 | GOST 26665-97 | Metal bodies planes. Specification | 25.140.30
79.120.20 |
|
| 26683 1985 | GOST 26683-85 | Woodworking equipment. Surface planers and thicknessers. Standards of accuracy | 79.120.10 | |
| 28699 1990 | GOST 28699-90 | Wood-cutting tool. Cilinder shanks. Types and basic dimensions | 79.120.20 | |
| 28700 1990 | GOST 28700-90 | Wood-cutteng tool. Taper shanks with screw thread. Dimensions | 79.120.20 | |
| 28701 1990 | GOST 28701-90 | Wood-cutting tool. Cutters. Diameters of tool mounting bore | 79.120.20 | |
| 28720 1990 | GOST 28720-90 | Woodworking equipment. Manipulators for loading and unloading. Basic parameters | 79.120 | |
| 29158 1991 | GOST 29158-91 | Woodworking machines. Mortising machines with oscillating tool action. Nomenclature | 01.040.79
79.120.10 |
|
| 29159 1991 | GOST 29159-91 | Woodworking machines. Universal tool and cutter grinding machines. Nomenclature | 01.040.79
79.120.10 |
|
| 29160 1991 | GOST 29160-91 | Woodworking machines. Disc sanding machines with spindle in fixed position. Nomenclature | 01.040.79
79.120.10 |
|
| 29161 1991 | GOST 29161-91 | Woodworking machines. Horisontal shredding machines for wood wool production, quadruple effect. Nomenclature | 01.040.79
79.120.10 |
|
| 29162 1991 | GOST 29162-91 | Woodworking machines. Lifting tables and stages. Nomenclature | 01.040.79
79.120.10 |
|
| 29163 1991 | GOST 29163-91 | Woodworking machines. Nomenclature | 01.040.79
79.120.10 |
|
| 29164 1991 | GOST 29164-91 | Woodworking machines. Vertical shredding machines for wood wool production with hydraulic clamping. Nomenclature | 01.040.79
79.120.10 |
|
| 29165 1991 | GOST 29165-91 | Woodworking machines. Circular sawing machines for building sites. Nomenclature | 01.040.79
79.120.10 |
|
| 29195 1991 | GOST 29195-91 | Woodworking machines. Veneer slicing machines. Nomenclature | 01.040.79
79.120.10 |
|
| 29196 1991 | GOST 29196-91 | Woodworking machines. Crosswise veneer splicing machines. Terminology | 01.040.79
79.120.10 |
|
| 29198 1991 | GOST 29198-91 | Woodworking machines. Single-end edge bonding machines. Terminology | 01.040.79
79.120.10 |
|
| 29199 1991 | GOST 29199-91 | Woodworking machines. Hand-loading veneering presses for flat surfaces. Terminology | 01.040.79
79.120.10 |
|
| 29274 1992 | GOST 29274-92 | Woodworking machines. Machines for production of core stock from laths. Terminology | 01.040.79
79.120.10 |
|
| 30047 1993 | GOST 30047-93 | Woodworking machines. Planing machines for two-, three- or four-side dressing. Nomenclature and acceptance conditions | 79.120.10 | |
| 30048 1993 | GOST 30048-93 | Woodworking machine. Singl chain mortising machines. Standards of accuracy | 79.120.10 | |
| 30049 1993 | GOST 30049-93 | Woodworking machines. Radial circular saws. Terminology and acceptance conditions | 79.120.10 | |
| 30091 1993 | GOST 30091-93 | Woodworking machines. Circular rip saws. Basic parameters. Standards of accuracy | 79.120.10 | |
| 50062 1992 | GOST R 50062-92 | Woodworking equipment. Thicknessing machines. Basic parameters. Norms of accuracy and rigidity | 79.120.10 | |
| 50179 1992 | GOST R 50179-92 | Saw teeth for woodworking saws. Profile shape. Terms and designation | 01.040.79
79.120.20 |
|
| 50322 1992 | GOST R 50322-92 | Woodworking equipment. Pattern milling machines. Basis parameters and dimensions. Norms of accuracy | 79.120.10 | |
| 50787 1995 | GOST R 50787-95 | Woodworking equipment. Woodworking transportable machines semi-fixed, for individual use. General requirements of safety | 79.120.10 | |
| 51101 1997 | GOST R 51101-97 | Metalworking and woodworking machines small-size. Testing methods safety requirements | 25.080.01
79.120.10 |
|
| 52401 2005 | GOST R 52401-2005 | Wood-cutting tools for hand operated machine-tools. Safety requirements | 79.120.20 | |
| 52419 2005 | GOST R 52419-2005 | Carbide tipped shell-type milling cutters for machining wood materials and plastics. Specifications | 79.120.20 | |
| IEC 61029-01 1994 | GOST R IEC 1029-1-94 | Transrportable motor-operated electric tools. General safety requirements and testing methods | 25.140.20
79.120.20 |
|
| IEC 61029-02-01 1995 | GOST R IEC 1029-2-1-95 | Electrical transportable tools. Specific safety requirements and methods of circular saws testing | 79.120.20 | |
| IEC 61029-02-02 1995 | GOST R IEC 1029-2-2-95 | Electrical transportable tools. Particular safety requirements and methods of radial arm saws | 79.120.20 | |
| IEC 61029-02-03 1996 | GOST R IEC 1029-2-3-96 | Electric transportable tools. Particular safety requirements and test methods of planers and thicknessers | 79.120.10
91.220 |
|
| IEC 61029-02-05 1996 | GOST R IEC 1029-2-5-96 | Electric transportable tools. Particular safety requirements and methods of band saws tests | 25.140.20
79.120.20 |
|
| IEC 61029-02-08 2000 | GOST R IEC 1029-2-8-2000 | Electric transportable tools. Particular safety requirements and methods of testing single spindle vertical moulders | 79.120.10
91.220 |
|
| Sort | Mk | 規格番号 | 規格名称(英語) | 国際規格分類 ( ICSコードの説明 ) |
ご意見、ご要望、ご質問 はお気軽に