標準関係情報集ロシア国家標準(GOST R規格)、旧ソ連邦標準(GOST規格)ICS(国際規格分類)コード順一覧(Part 23)

ロシア国家標準、旧ソ連邦標準
(GOST R, GOST規格) ＩＣＳ(国際規格分類)コード順一覧
大分類 23

23	一般用流体システム及び構成要素注: 流体の測定→ 17.120
23.020	流体貯蔵装備注: 液体及び粉流体輸送用コンテナ→ 55.140
23.040	パイプライン部品及びパイプライン注: 石油、天然ガス用→ 75.200
23.060	弁
23.080	ポンプ注: 真空ポンプ→ 23.160 注: 流体動力用ポンプ→ 23.100.10
23.100	流体動力システム注: 作動油→ 75.120
23.120	換気装置．ファン．空調装置注: 舶用ベンチレーション、空調、暖房→ 47.020.90 注: 鉱山用ベンチレーション、空調→ 73.100.20 注: 通気及び空気調和システム→ 91.140.30
23.140	圧縮機及び空気圧機械注: 圧縮空気→ 71.100.20
23.160	真空技術注: 真空ポンプを含む。

手持ちの情報を整理したものであり、規格原本による確認は行っていません。
すべてを網羅しているわけでも、正確さ、最新性を保証するものではありませんので、規格原本などで確認してください。
23.020 流体貯蔵装備
注: 液体及び粉流体輸送用コンテナ→ 55.140

Sort Mk 規格番号規格名称(英語) 国際規格分類
( ICSコードの説明 )

00012-02-085 1982 　 GOST 12.2.085-82 Occupational safety standards system. Vessels working under pressure. Safety valves. Safety requirements 13.100
23.020.30

00012-02-085 2002 　 GOST 12.2.085-2002 Vessels working under pressure. Safety valves. Safety requirements 23.020.30

00949 1973 　 GOST 949-73 Small and medium volume steel cylinders for gases for Pw<=19,6 MPa (200kgf/sm2). Specifications 23.020.30

04609 1949 　 GOST 4609-49 Filling-draining equipment for flammable and highly inflammable liquids. Single filling-draining standpipe with manual pump 23.020.10

04610 1949 　 GOST 4610-49 Filling-draining equipment for flammable and highly inflammable liquids. Powered single filling-draining standpipe 23.020.10

05172 1963 　 GOST 5172-63 Cylindric steel gas-holders with constancy of volume. Parameters and basic dimensions 23.020.30

06533 1978 　 GOST 6533-78 Ellipsoidaldished heads flanged made of steel for vess els apparatus and boilers. Basis dimensions 23.020.01

09731 1979 　 GOST 9731-79 Steel seamless cylinders of large capacity for gases for Pw <= 24,5 MPa (250 kgf/cm2). Specifications 23.020.30

12247 1980 　 GOST 12247-80 Large seamless steel gas cylinders for operating pressure of 31,4 and 39,2 MPa (320 and 400 kgf/cm sq.). Specifications 23.020.30

15860 1984 　 GOST 15860-84 Steel welded cylinders for liquefied hydrocarbon gases at pressure up to 1,6 MPa. Specifications 23.020.30

24000 1997 　 GOST 24000-97 Agitated enamelled vessels. Types, basic parameters and dimensions 23.020.30

26303 1984 　 GOST 26303-84 High-pressure vessels and apparatus. Threaded studs. Methods of strength calculation 71.120.01
23.020.30

28759-08 1990 　 GOST 28759.8-90 Metal gaskets of octangular section. Design and dimensions. Technical requirements 71.120.01
23.020.30

50599 1993 　 GOST R 50599-93 Welded steel vessels and apparatus under high pressure. Non-destructive control while the manufacturing and operating 23.020.30

50650 1994 　 GOST R 50650-94 Domestic siphons. Safety requirements and test methods 97.040.50
23.020.30

50651 1994 　 GOST R 50651-94 Gas cylinders for domestic siphons. Safety requirements and test methods 23.020.30
97.040.50

52910 2008 ★ GOST R 52910-2008 Vertical cylindrical steel tanks for oil and oil-products. General specifications 23.020.01

23.040 パイプライン部品及びパイプライン
注: 石油、天然ガス用→ 75.200

Sort Mk 規格番号規格名称(英語) 国際規格分類
( ICSコードの説明 )

00002-411 1972 　 GOST 2.411-72 Unified system for design documentation. Rules for drawings of pipes, pipelines and pipeline systems 01.100.20
23.040

00002-784 1970 　 GOST 2.784-70 Unified system for design documentation. Symbolic repersentations. Pipeline elements 01.080.30
23.040

00002-784 1996 　 GOST 2.784-96 Unified system for design documentation. Graphic designations. Pipeline elements 01.080.30
23.040

00002-785 1970 　 GOST 2.785-70 Unified system for design documentation. Graphic designations. Pipeline accessories 01.080.30
23.040.60

00004-411 1986 　 GOST 4.411-86 Index system of production quality. Complects of fashion details, assambleys and blocks (tube assambleys) for tubes of heat energy stations and atom energy stations with pressure 2,2 MPa and more index nomenclature 03.120
27.100
23.040

00012-02-063 1981 　 GOST 12.2.063-81 Occupational safety standards system. Industrial pipeline valves. General safety requirements 13.100
23.040

00167 1969 　 GOST 167-69 Lead tubes. Specifications 23.040.15
77.150.60

00356 1980 　 GOST 356-80 Pressure-temperature ratings for valves and fittings, conditional, test and service pressures 23.040.60

00494 1990 　 GOST 494-90 Brass tubes. Specifications 23.040.15
77.150.30

00529 1978 　 GOST 529-78 Radiator tubes. Technical requirements 23.040.15
77.150.30

00539 1980 　 GOST 539-80 Asbestos cement pressure pipes and couplings. Specifications 23.040.50

00617 1990 　 GOST 617-90 Copper tubes. Specifications 23.040.15
77.150.30

00800 1978 　 GOST 800-78 Bearing tubes. Technical requirements 23.040.10

01208 1990 　 GOST 1208-90 Pressed bronze tubes. Specifications 23.040.15
77.150.30

01536 1976 　 GOST 1536-76 Flanges for ship's pipeline systems. Coupling dimensions and sealing surfaces 47.020.30
23.040.60

02622 1975 　 GOST 2622-75 Manometric tubes made of bronzo БрОФ4-0,25 and brass Л63. Specifications 23.040.15
77.150.30

02624 1977 　 GOST 2624-77 Capillary copper and brass tubes. Specifications 23.040.15
77.150.30

02936 1975 　 GOST 2936-75 Plane-oval seamless radiator tubes. Specifications 23.040.15
77.150.30

03262 1975 　 GOST 3262-75 Water-supply and gas-supply steel pipes. Technical conditions 23.040.10

03728 1978 　 GOST 3728-78 Tubes. Method of bend-over test 23.040.10

03845 1975 　 GOST 3845-75 Metallic tubes. Hydraulic pressure testing method 23.040.10

04433 1976 　 GOST 4433-76 Flanges of valves connecting pieces and pipelines for shipping systems. Types 47.020.30
23.040.60

04666 1975 　 GOST 4666-75 Valves. Marking and distinctive painting 23.040.60

05005 1982 　 GOST 5005-82 Steel electrowelded cold-deformed pipes for cardan shafts. Specifications 23.040.10

05260 1975 　 GOST 5260-75 Cast iron handwheels for pipeline armature. Types, basic dimensions and technical requirements 23.040.60

05525 1988 　 GOST 5525-88 Pig iron connecting parts manufactured by pouring into sand moulds for pipelines. Specifications 23.040.60

06527 1968 　 GOST 6527-68 Female ends with pipe cylindrical thread. Dimensions 23.040.60

08638 1957 　 GOST 8638-57 Steel tubes. Range 23.040.10

08639 1982 　 GOST 8639-82 Square steel pipes. Range 23.040.10

08642 1968 　 GOST 8642-68 Oval steel tubes. Range 23.040.10

08644 1968 　 GOST 8644-68 Flat-sided oval steel tubes. Range 23.040.10

08645 1968 　 GOST 8645-68 Rectangular steel tubes. Range 23.040.10

08646 1968 　 GOST 8646-68 Empty-ribbed steel tubes. Range of sizes 23.040.10

08693 1980 　 GOST 8693-80 Metal pipes. Method of flange testing 23.040.10

08694 1975 　 GOST 8694-75 Tubing. Expansion testing method 23.040.10

08695 1975 　 GOST 8695-75 Tubing. Flattening testing method 23.040.10

08696 1974 　 GOST 8696-74 General-purpose electrically-welded spiral seam steel pipes. Specifications 23.040.10

08731 1974 　 GOST 8731-74 Seamless hot-deformed steel pipes. Technical requirements 23.040.10

08731 1987 　 GOST 8731-87 Seamless hot-rolled steel tubes. Specifications 23.040.10
77.140.75

08732 1978 　 GOST 8732-78 Seamless hot-deformed steel pipes. Range of sizes 77.140.75
23.040.10

08733 1974 　 GOST 8733-74 Seamles cold and warm deformed pipes. Specifications 77.140.75
23.040.10

08733 1987 　 GOST 8733-87 Seamless cold and warm deformed tubes. Technical requirements 23.040.10
77.140.75

08734 1975 　 GOST 8734-75 Seamless steel tubes cold deformed. Range 23.040.10

08943 1975 　 GOST 8943-75 Ductile iron and steel fittings with parallel thread for pipelines. Nomenclature 23.040.60

08944 1975 　 GOST 8944-75 Ductile iron and steel fittings with parallel thread for pipelines. Technical requirements 23.040.60

08946 1975 　 GOST 8946-75 Ductile iron and steel fittings with parallel thread for pipelines. Union passage elbews. Basic dimensions 23.040.60

08947 1975 　 GOST 8947-75 Ductile iron and steel fittings with parallel thread for pipelines. Transition angles. Basic dimensions 23.040.60

08948 1975 　 GOST 8948-75 Ductile iron and steel fittings with parallel thread for pipelines. Straight tees. Basic dimensions 23.040.60

08949 1975 　 GOST 8949-75 Ductile iron and steel fittings with parallel thread for pipelines. Transition tees. Basic dimensions 23.040.60

08950 1975 　 GOST 8950-75 Ductile iron fittings with parallel thread for pipelines. Tees with two passages. Basic dimensions 23.040.40

08951 1975 　 GOST 8951-75 Ductile iron fittings with parallel thread for pipelines. Straight four-way junction pieces. Basic dimensions 23.040.60

08952 1975 　 GOST 8952-75 Ductile iron fittings with parallel thread for pipelines. Transition four-way junction pieces. Basic dimensions 23.040.60

08953 1975 　 GOST 8953-75 Ductile iron fittings with parallel thread for pipelines. Four-way junction pieces with two passages. Basic dimensions 23.040.60

08954 1975 　 GOST 8954-75 Ductile iron fittings with parallel thread for pipelines. Straight short sockets. Basic dimensions 23.040.60

08955 1975 　 GOST 8955-75 Ductile iron fittings with parallel thread for pipelines. Straight long sockets. Basic dimensions 23.040.60

08956 1975 　 GOST 8956-75 Ductile iron fittings with parallel thread for pipelines. Compensation sockets. Basic dimensions 23.040.60

08957 1975 　 GOST 8957-75 Ductile iron fittings with parallel thread for pipelines. Transition sockets. Basic dimensions 23.040.60

08958 1975 　 GOST 8958-75 Ductile iron fittings with parallel thread for pipelines. Double nipples. Basic dimensions 23.040.60

08959 1975 　 GOST 8959-75 Ductile iron fittings with parallel thread for pipelines. Connection nuts. Basic dimensions 23.040.60

08960 1975 　 GOST 8960-75 Ductile iron fittings with parallel thread for pipelines. Threaded bushings. Basic dimensions 23.040.60

08961 1975 　 GOST 8961-75 Ductile iron fittings with parallel thread for pipelines. Locknuts. Basic dimensions 23.040.60

08962 1975 　 GOST 8962-75 Ductile iron fittings with parallel thread for pipelines. Caps. Basic dimensions 23.040.60

08963 1975 　 GOST 8963-75 Ductile iron fittings with parallel thread for pipelines. Plugs. Basic dimensions 23.040.60

08965 1975 　 GOST 8965-75 Pipe steel connections with cylindrical thread for pipe-lines P=1,6 MPa. Specifications 23.040.40

08966 1975 　 GOST 8966-75 Pipe steel connections with cylindrical thread for pipelines P=1,6 MPa. Straight sockets. Basic dimensions 23.040.40

08967 1975 　 GOST 8967-75 Pipe steel connections with cylindrical thread for pipelines P=1,6 MPa. Nippels. Basic dimensions 23.040.40

08968 1975 　 GOST 8968-75 Pipe steel connections with cylindrical thread for pipelines P=1,6 MPa. Zock-nuts. Basic dimensions 23.040.40

08969 1975 　 GOST 8969-75 Pipe steel connections with cylindrical thread for pipelines P=1,6 MPa. Adapter coupling. Basic dimensions 23.040.40

09064 1975 　 GOST 9064-75 Nuts for flauged connection with medium temperature 0 to 650 degrees c. Types and general sizes 23.040.60
21.060.20

09065 1975 　 GOST 9065-75 Washers for flanged connection with medium temperature 0 to 650 degrees C. Types and general sizes 23.040.60

09066 1975 　 GOST 9066-75 Stude for flanged connections with medium temperature 0 to 650 degrees c. Types and general sizes 23.040.60
21.060.10

09399 1981 　 GOST 9399-81 Threaded steel flanges for Pn 20-100 MPa (200-1000 kgf/cm2). Specifications 23.040.60

09400 1981 　 GOST 9400-81 Threaded connecting ends for valves, fittings and pipes with tens - shaped seals for pn20-100 mpa (200-1000 kgf/cm2) dimensions 23.040.60

09544 1975 　 GOST 9544-75 Pipeline stop valves. Standards for disc tightness 23.040

09544 1993 　 GOST 9544-93 Pipeline gate valves-rates of gates sealibility 23.040.60

09567 1975 　 GOST 9567-75 Precision steel tubes. Range 23.040.10

09583 1975 　 GOST 9583-75 Cast iron pressure pipes made by centrifugal and semicontinuous casting methods. Specifications 23.040.10

09940 1981 　 GOST 9940-81 Seamless hot deformed tubes made of corrosion resistant steel. Specifications 23.040.10

09941 1981 　 GOST 9941-81 Seamless cold- and warm-deformed tubes of corrosion-resistant steel. Specifications 23.040.10

10006 1980 　 GOST 10006-80 Metal tubes. Tensile test method 23.040.10
23.040.15

10092 1975 　 GOST 10092-75 Cupro-nickel tubes for heat-exchanging apparatus. Specifications 23.040.15
77.150.30

10493 1981 　 GOST 10493-81 Rigin and compensating lens-shaped seals for pn20-100 mpa (200-1000 kgf/cm2). Technical specifications 23.040.80

10494 1980 　 GOST 10494-80 Studs for flanged connections with lens-shaped seals pn 10-100 mpa (100-1000 kgf/cm2). Technical requirements 23.040.60

10495 1980 　 GOST 10495-80 Hexgonal nuts for flanged connections for pn 10-100 mpa (100-1000 kgf/cm2) technical requirements 23.040.60

10498 1982 　 GOST 10498-82 Especially thin-walled seamless tubes from corrosion-resistant steel. Specifications 23.040.10

10692 1980 　 GOST 10692-80 Steel and cast iron pipes and fittings. Rules for acceptance, marking, packing, transportation and storage 23.040.10

10704 1991 　 GOST 10704-91 Electrically welded steel line-weld tubes. Range 23.040.10

10705 1980 　 GOST 10705-80 Electrically welded steel tubes. Specifications 23.040.10

10706 1976 　 GOST 10706-76 Electrically welded steel line-weld tubes. Technical requirements 23.040.10

11017 1980 　 GOST 11017-80 Steel seamless tubes for high pressure service. Specifications 23.040.10

11068 1981 　 GOST 11068-81 Electrically tubes made of corrosion resistant steel. Specifications 23.040.10

11249 1980 　 GOST 11249-80 Steel rolled up soldered double-layer tubes. Specifications 23.040.10
77.140.75

11383 1975 　 GOST 11383-75 Thin-walled copper and brass tubes. Specifications 23.040.15
77.150.30

11447 1980 　 GOST 11447-80 Locking studs for Py 10-100 MPa (100-1000 kgf/cm2). Technical requirements 23.040.60

11706 1978 　 GOST 11706-78 Tubes. Method the tensile test of ring by cone 23.040.10

12132 1966 　 GOST 12132-66 Electrowelded and seamless steel tubes for automotive and bicycle industries. Specifications 23.040.10

12501 1967 　 GOST 12501-67 Tubes. Twisting moment test method 23.040.10

12586-00 1983 　 GOST 12586.0-83 Reinforced-concrete vibrohydropressed pressure pipes. Specifications 23.040.50

12586-01 1983 　 GOST 12586.1-83 Reinforced concrete vibrohydropressed pressure pipes. Structure and dimensions 23.040.50

12815 1980 　 GOST 12815-80 Flanges for valves, fittings and pipelines for Pnon from 0,1 to 20 MPa (from 1 to 200kgf/cm 2). Types. Connecting dimensions and dimensions of sealing surfaces 23.040.60

12816 1980 　 GOST 12816-80 Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/cm2)/ General technical requirements 23.040.60

12817 1980 　 GOST 12817-80 Cast grey iron flanges for Pnom from 0,1 to 1,6 MPa (from 1 to 16 kgf/cm2). Design and dimensions 23.040.60

12818 1980 　 GOST 12818-80 Cast malteable iron flanges for Pnom from 1,6 to 4,0 MPa (from16 to 40 kgf/cm2). Design and dimensions 23.040.60

12819 1980 　 GOST 12819-80 Cast steel flanges for Pnom from 1,6 to 20,0 MPa (from 16 to 200 kgf/cm2). Design and dimensions 23.040.60

12820 1980 　 GOST 12820-80 Steel plane welded flanges for Pnom from 0,1 to 2,5 MPa (from 1to 25kgf/cm2). Design and dimensions 23.040.60

12821 1980 　 GOST 12821-80 Steel butt-welded flanges for Pnom from 0,1 to 20,0 MPa (from 1 to 200 kgf/cm2). Design and dimensions 23.040.60

12822 1980 　 GOST 12822-80 Steel loose flanges with welded ring for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/cm2). Design and dimensions 23.040.60

13548 1977 　 GOST 13548-77 Thin-walled tubes of nickel and nickel alloys. Specifications 23.040.15
77.150.40

13663 1986 　 GOST 13663-86 Shaped steel tubes. Technical requirements 23.040.10

13954 1974 　 GOST 13954-74 Flared pipe ends for tube connections on external cone. Construction and dimensions 23.040.60

13955 1974 　 GOST 13955-74 Threaded ends of fittings for tube connections on external cone. Construction and dimensions 23.040.60

13956 1974 　 GOST 13956-74 Sleeves for tube connections on external cone. Construction and dimensions 23.040.60

13957 1974 　 GOST 13957-74 Captive nuts for tube connections on external cone. Construction and dimensions 23.040.60

13958 1974 　 GOST 13958-74 Nuts for fastening tube connections on external cone. Construction and dimensions 23.040.60

13959 1974 　 GOST 13959-74 Unions for tube connections on external cone. Construction and dimensions 23.040.60

13960 1974 　 GOST 13960-74 Flange unions for tube connections on external cone. Construction and dimensions 23.040.60

13961 1974 　 GOST 13961-74 Reduce-type unions for tube connections on external cone. Construction and dimensions 23.040.60

13962 1974 　 GOST 13962-74 Union elbows for tube connections on external cone. Construction and dimensions 23.040.60

13963 1974 　 GOST 13963-74 Flange union elbows for tube connections on external cone. Construction and dimensions 23.040.60

13964 1974 　 GOST 13964-74 Union tees for tube connections on external cone. Construction and dimensions 23.040.60

13965 1974 　 GOST 13965-74 Reduce-type tees for tube connections on external cone. Construction and dimensions 23.040.60

13966 1974 　 GOST 13966-74 Flange union tees for tube connections on external cone. Construction and dimensions 23.040.60

13967 1974 　 GOST 13967-74 Union crosses for tube connections on external cone. Construction and dimensions 23.040.60

13968 1974 　 GOST 13968-74 Reduce-type crosses for tube connections on external cone. Construction and dimensions 23.040.60

13969 1974 　 GOST 13969-74 Screwed unions for tube connections on external cone. Construction and dimensions 23.040.60

13970 1974 　 GOST 13970-74 Screwed elbows for tube connections on external cone. Construction and dimensions 23.040.60

13971 1974 　 GOST 13971-74 Connector tees for tube connections on external cone. Construction and dimensions 23.040.60

13972 1974 　 GOST 13972-74 Screwed crosses for tube connections on external cone. Construction and dimensions 23.040.60

13973 1974 　 GOST 13973-74 Plugs for tube connections on external cone. Construction and dimesions 23.040.60

13974 1974 　 GOST 13974-74 Seat stoppers for screwed fittings for tube connections on external cone. Construction and dimensions 23.040.60

13976 1974 　 GOST 13976-74 Caps for tube connections on external cone. Construction and dimensions 23.040.60

13977 1974 　 GOST 13977-74 Tube connections on external cone. Specifications 23.040.60

14162 1979 　 GOST 14162-79 Steel tubes of small dimensions (capillary). Specifications 23.040.10

14187 1984 　 GOST 14187-84 Plug valves. Overroll dimensions 23.040.60

14202 1969 　 GOST 14202-69 Pipelines of industrial plants identification colouring, safety signs and marking screens 23.040
01.070
01.075

15040 1977 　 GOST 15040-77 Oxygen-free copper pipes. Specifications 23.040.15

15180 1986 　 GOST 15180-86 Flexible flat gaskets. Main parameters and dimensions 23.040.80

15763 1991 　 GOST 15763-91 Threaded pipe fittings for P nom to 63 MPa (630 kgf/cm2). General specifications 23.040.60

15803 1976 　 GOST 15803-76 Threaded pipeline connections. Counternuts. Construction 23.040.60

16039 1970 　 GOST 16039-70 Threaded ends of fittings for tube connections on internal cone. Construction and dimensions 23.040.60

16040 1970 　 GOST 16040-70 Semispherical solderable sleeves for tube connections on internal cone. Construction and dimensions 23.040.60

16041 1970 　 GOST 16041-70 Spherical solderable sleeves for tube connections on internal cone. Construction and dimensions 23.040.60

16042 1970 　 GOST 16042-70 Semispherical welded sleeves for tube connections on internal cone. Construction and dimensions 23.040.60

16043 1970 　 GOST 16043-70 Spherical welded sleeves for tube connections on internal cone. Construction and dimensions 23.040.60

16044 1970 　 GOST 16044-70 Solderable fittings for tube connections on internal cone. Construction and dimensions 23.040.60

16045 1970 　 GOST 16045-70 Welded fittings for tube connections on internal cone. Construction and dimensions 23.040.60

16046 1970 　 GOST 16046-70 Captive nuts of semispherical sleeves for tube connections on internal cone. Construction and dimensions 23.040.60

16047 1970 　 GOST 16047-70 Captive nuts of spherical sleeves for tube connections on internal cone. Construction and dimensions 23.040.60

16048 1970 　 GOST 16048-70 Thrust rings for tube connections on internal cone. Construction and dimensions 23.040.60
23.040.80

16049 1970 　 GOST 16049-70 Unions for tube connections on internal cone. Construction and dimensions 23.040.60

16050 1970 　 GOST 16050-70 Long unions for tube connections on internal cone. Construction and dimensions 23.040.60

16051 1970 　 GOST 16051-70 Flange unions for tube connections on internal cone. Construction and dimensions 23.040.60

16052 1970 　 GOST 16052-70 Reducer type unions for tube connections on internal cone. Construction and dimensions 23.040.60

16053 1970 　 GOST 16053-70 Union elbows for tube connections on internal cone. Construction and dimensions 23.040.60

16054 1970 　 GOST 16054-70 Flange union elbows for tube connections on internal cone. Construction and dimensions 23.040.60

16055 1970 　 GOST 16055-70 Flange union elbows with slope angle 135 for tube connections on internal cone. Construction and dimensions 23.040.60

16056 1970 　 GOST 16056-70 Flange union elbows hermetable for tube connections on internal cone. Construction and dimensions 23.040.60

16057 1970 　 GOST 16057-70 Flange union elbows hermetable with slope angle 135 for tube connections on internal cone. Construction and dimensions 23.040.60

16058 1970 　 GOST 16058-70 Union tees for tube connections on internal cone. Construction and dimensions 23.040.60

16059 1970 　 GOST 16059-70 Reducer type tees for tube connections on internal cone. Construction and dimensions 23.040.60

16060 1970 　 GOST 16060-70 Reducer type tees with thread diameter 14 mm on middle fitting for tube connections on internal cone. Construction and dimensions 23.040.60

16061 1970 　 GOST 16061-70 Flange union tees for tube connections on internal cone. Construction and dimensions 23.040.60

16062 1970 　 GOST 16062-70 Flange union tees asymmetric for tube connections on internal cone. Construction and dimensions 23.040.60

16063 1970 　 GOST 16063-70 Flange union tees hermetable for tube connections on internal cone. Construction and dimensions 23.040.60

16064 1970 　 GOST 16064-70 Flange union tees asymmetric hermetable for tube connections on internal cone. Construction and dimensions 23.040.60

16065 1970 　 GOST 16065-70 Union crosses for tube connections on internal cone. Construction and dimensions 23.040.60

16066 1970 　 GOST 16066-70 Reducer type crosses for tube connections on internal cone. Construction and dimensions 23.040.60

16067 1970 　 GOST 16067-70 Asymmetric union crosses asymmetric for tube connections on internal cone. Construction and dimensions 23.040.60

16068 1970 　 GOST 16068-70 Reducer type crosses with thread diameter 14 mm on single fitting for tube connections on internal cone. Construction and dimensions 23.040.60

16069 1970 　 GOST 16069-70 Washers for tube connections on internal cone. Construction and dimensions 23.040.60

16070 1970 　 GOST 16070-70 Unions screwed for rubber packer for tube connections on internal cone. Construction and dimensions 23.040.60

16071 1970 　 GOST 16071-70 Unions screwed for metal packer for tube connections on internal cone. Construction and dimensions 23.040.60

16072 1970 　 GOST 16072-70 Union elbows screwed for tube connections on internal cone. Construction and dimensions 23.040.60

16073 1970 　 GOST 16073-70 Union elbows screwed with slope angle 135 for tube connections on internal cone. Construction and dimensions 23.040.60

16074 1970 　 GOST 16074-70 Union tees screwed for tube connections on internal cone. Construction and dimensions 23.040.60

16075 1970 　 GOST 16075-70 Union tees asymmetric screwed for tube connections on internal cone. Construction and dimensions 23.040.60

16076 1970 　 GOST 16076-70 Spherical head stoppers for tube connections on internal cone. Construction and dimensions 23.040.60

16077 1970 　 GOST 16077-70 Stoppers tapered for tube connections on internal cone. Construction and dimensions 23.040.60

16078 1970 　 GOST 16078-70 Tube connections on internal cone. Technical requirements 23.040.60

16774 1978 　 GOST 16774-78 Copper tubes of rectangular and square section. Specifications 23.040.15
77.150.30

17019 1978 　 GOST 17019-78 Fixing parts for pipelines and cables. Specifications 23.040.60

17020 1978 　 GOST 17020-78 Clamps, holders and belts for fixing of pipelines and cables. Design and sizes 23.040.60

17217 1979 　 GOST 17217-79 Tubes of copper-nickel alloy МНЖ5-1. Specifications 23.040.15
77.150.30

17375 1983 　 GOST 17375-83 [withdrawn]
Seamless welded steel pipeline components for Pn <=10 Mpa (<= 100 kgf/sq sm). Sharply curved offsets. Design and dimensions 23.040.01

17375 2001 　 GOST 17375-2001 Carbon and low-alloy steel butt-welding fittings. Sharply curved bends type 3D (R=1,5 DN). Design 23.040.40

17376 1983 　 GOST 17376-83 [withdrawn]
Seamless welded on carbon steel pipeline components for Pn <= 10 Mpa (<= 100 kgf/sq sm). Tees. Design and dimensions 23.040.40

17376 2001 　 GOST 17376-2001 Carbon and low-alloy steel butt-welding fittings. Tees. Design 23.040.40

17378 1983 　 GOST 17378-83 [withdrawn]
Seamless welded steel pipeline components for Pn <= 10 Mpa (<= 100 kgf/sq sm). Reducers. Design and dimensions 23.040.40

17378 2001 　 GOST 17378-2001 Carbon and low-alloy steel butt-welding fittings. Reducers. Design 23.040.40

17379 1983 　 GOST 17379-83 [withdrawn]
Seamless welded steel pipeline components for Pn <= 10 Mpa (<= 100 kgf/sq sm). Elliptical pipe seals. Design and dimensions 23.040.40

17379 2001 　 GOST 17379-2001 Carbon and low-alloy steel butt-welding fittings. Elliptical caps. Design 23.040.40

17380 1983 　 GOST 17380-83 [withdrawn]
Seamless welded steel pipeline components for Pn<=10 Mpa (<=100 kgf/sq sm). Specifications 23.040.40

17380 2001 　 GOST 17380-2001 Carbon and low-alloy steel butt-welding fittings. General specifications 23.040.40

17410 1978 　 GOST 17410-78 Non-destructive testing. Metal seamless cylindrical pipes and tubes. Ultrasonic methods of defekt detection 23.040.10
23.040.15
77.040.20

17584 1972 　 GOST 17584-72 Cast iron joining rings and fittings for asbestos cement pressure pipes 23.040.60

18475 1982 　 GOST 18475-82 Aluminium and aluminium alloy cold-rolled tubes. Specifications 23.040.15
77.150.10

18482 1979 　 GOST 18482-79 Aluminium and aluminium alloy extruded tubes. Specifications 23.040.15
77.150.10

18599 1983 　 GOST 18599-83 Polyethylene pressure pipes. Specifications 23.040.20
83.140.30

18599 2001 　 GOST 18599-2001 Polyethylene pressure pipes. Specifications 23.040.20
83.140.30

19034 1982 　 GOST 19034-82 Tubes of polyvinylchloride plastic. Specifications 23.040.20
83.140.30

19040 1981 　 GOST 19040-81 Metal tubes. Method of tension test at high temperatures 23.040.10
23.040.15

19334 1973 　 GOST 19334-73 Connection parts for pipe-lines and metal-reinforced hoses. Types, basic dimensions and technical requirements 23.040.60

19441 1974 　 GOST 19441-74 Magnesium-alloy extruded tubes. Specifications 23.040.15
77.150.20

19528 1974 　 GOST 19528-74 Sealing devices of screw joints with round cross-section rubber rings. Construction and dimensions 23.040.80

19529 1974 　 GOST 19529-74 Sealing devices of screw joints with round cross-section rubber rings. Seats. Construction and dimensions 23.040.80

19530 1974 　 GOST 19530-74 Sealing devices of screw joints with round cross-section rubber rings. Screw part. Construction and dimensions 23.040.80

19531 1974 　 GOST 19531-74 Sealing devices of screw joints with round cross-section rubber rings. Fluoroplastic washers. Construction and dimensions 23.040.80

19532 1974 　 GOST 19532-74 Sealing devices of screw joints with round cross-section rubber rings. Nuts. Construction and dimensions 23.040.80

19535 1974 　 GOST 19535-74 Flange joints for hydraulic and lubricating systems. Specifications 23.100
21.260
23.040.60

20188 1974 　 GOST 20188-74 Unions hermeticable for tube connections on external cone. Construction and dimensions 23.040.60

20189 1974 　 GOST 20189-74 Flange unions elbows hermeticable for tube connections on external cone. Construction and dimensions 23.040.60

20190 1974 　 GOST 20190-74 Reduce type flange elbows for tube connections on external cone. Construction and dimensions 23.040.60

20191 1974 　 GOST 20191-74 Flange union tees hermeticable for tube connections on external cone. Construction and dimensions 23.040.60

20192 1974 　 GOST 20192-74 Reduce type flange tees for tube connections on external cone. Construction and dimensions 23.040.60

20193 1974 　 GOST 20193-74 Wachers for fastening tupe connection on external cone. Construction and dimensions 23.040.60

20194 1974 　 GOST 20194-74 Unions screwed for metal packer for tube connections on external cone. Construction and dimensions 23.040.60

20195 1974 　 GOST 20195-74 Unions screwed for rubber packer for tupe connection on external cone. Construction and dimensions 23.040.60

20196 1974 　 GOST 20196-74 Reduce tupe unions screwed for rubber packer for tube connections on external cone. Construction and dimensions 23.040.60

20197 1974 　 GOST 20197-74 Union elbows screwed for rubber packer for tube connections on external cone. Construction and dimensions 23.040.60

20198 1974 　 GOST 20198-74 Reduce type union elbows screwed for rubber packer for tube connections on external cone. Construction and dimensions 23.040.60

20199 1974 　 GOST 20199-74 Union tees screwed for rubber packer for tube connections on external cone. Construction and dimensions 23.040.60

20200 1974 　 GOST 20200-74 Reduce type union tees screwd for rubber packer for tube connections on external cone. Construction and dimensions 23.040.60

20467 1985 　 GOST 20467-85 Fitting pipe connections. Durability estimation of connections with a cut ring and a ball nipple 23.040.60

20700 1975 　 GOST 20700-75 Bolts, studs, nuts and washers for flanged and anchor connections, corks and yokes with medium temperature from 0 to 650 C. Specifications 21.060
23.040

20772 1981 　 GOST 20772-81 Connecting devices for technical means for fueling, pumping, loading-unloading, transport and storage of raw oil and petroleum products. Types, basic parameters and sizes. General technical requirements 23.040.60

20900 1975 　 GOST 20900-75 Copper tubing for waveguides and brass right angle tubes. Specifications 23.040.15
77.150.30

21646 1976 　 GOST 21646-76 Copper and brass tubes for heat-exchange apparatus. Specifications 23.040.15
77.150.30

21646 2003 　 GOST 21646-2003 Copper and brass tubes for heat-exchange apparatus. Specifications 23.040.15

21729 1976 　 GOST 21729-76 Cold-deformed and hot-deformed structural carbon and alloyed steel tubes. Specifications 23.040.10

21744 1983 　 GOST 21744-83 Multilayer metal bellows. General specifications 23.040.80

21856 1978 　 GOST 21856-78 Threaded pipeline connections. Passage unions. Construction 23.040.60

21857 1978 　 GOST 21857-78 Threaded pipeline connections. Reduce unions. Construction 23.040.60

21858 1978 　 GOST 21858-78 Threaded pipeline connections. End unions. Construction 23.040.60

21859 1978 　 GOST 21859-78 Threaded pipeline connections. Union passage elbows. Construction 23.040.60

21862 1978 　 GOST 21862-78 Threaded pipeline connections. Union passage tees. Construction 23.040.60

21863 1978 　 GOST 21863-78 Threaded pipeline connections. Reduce tees. Construction 23.040.60

21869 1978 　 GOST 21869-78 Threaded pipeline connections. Union passage crosses. Construction 23.040.60

21872 1978 　 GOST 21872-78 Threaded pipeline connections. Partition unions. Construction 23.040.60

21873 1978 　 GOST 21873-78 Threaded pipeline connections. Stoppers. Construction 23.040.60

21945 1976 　 GOST 21945-76 Seamless hot-rolled tubes of alloys based on titanium. Specifications 23.040.15
77.150.50

21971 1976 　 GOST 21971-76 Threaded piping joints. Conventional passages (nominal sizes). Series 23.040.60

21972 1976 　 GOST 21972-76 Threaded piping joint. Nominal (conditional) pressures. Series 23.040.60

21973 1976 　 GOST 21973-76 Threaded piping joints. Joining threads. Series 23.040.60

21974 1976 　 GOST 21974-76 Threaded piping joints. External tube diameters and inside diameters of hoses. Series 23.040.60

21975 1976 　 GOST 21975-76 Threaded piping joints. Nomenclature of case parts 23.040.60

22130 1986 　 GOST 22130-86 Steel piping details. Movable supports and hangers. Specifications 23.040.40

22512 1977 　 GOST 22512-77 Steel flanges with tongue and groove for Pnom up to 6,4 MPa (64 kgf/sq sm) and Dnom to 300 mm. Connecting dimensions 23.040.60

22525 1977 　 GOST 22525-77 Threaded pipeline connections. Pipe nipple ends for union nuts. Construction 23.040.60

22526 1977 　 GOST 22526-77 Threaded pipeline connections. Screwed pipe nipple ends and sockets for them. Construction 23.040

22642 1988 　 GOST 22642-88 Pinch pipeline valves. Main parameters 23.040.70

22643 1987 　 GOST 22643-87 Plastic valves. Main parameters 23.040.45

22786 1977 　 GOST 22786-77 Bimetalic seamless tubes for shipbuilding. Specifications 23.040.10
23.040.15
47.020.30

22790 1989 　 GOST 22790-89 Assembly units and pipeline parts for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). General specifications 23.040.60

22791 1983 　 GOST 22791-83 Assembly units and pipeline parts. Dead lenses with indicator for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions 23.040.60

22792 1983 　 GOST 22792-83 Assembly units and pipeline parts. Unions for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions 23.040.60

22793 1983 　 GOST 22793-83 Assemply units and pipeline parts. Bend arms for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions 23.040.60

22794 1983 　 GOST 22794-83 Assembly units and pipeline parts. Flanged elbow bends for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions 23.040.60

22795 1983 　 GOST 22795-83 Assembly units and pipeline parts. Abutment and flanged elbow bends for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions 23.040.60

22796 1983 　 GOST 22796-83 Assembly units and pipeline parts. Unequal flanged elbow bends for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions 23.040.60

22797 1983 　 GOST 22797-83 Assembly units and pipeline parts. Abutment for bends for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions 23.040.60

22798 1983 　 GOST 22798-83 Assembly units and pipeline parts. Flanged double bends for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions 23.040.60

22799 1983 　 GOST 22799-83 Assembly units and pipeline parts. Flanged angles for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions 23.040.60

22800 1983 　 GOST 22800-83 Assembly units and pipeline parts. Armed and flanged angles for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions 23.040.60

22801 1983 　 GOST 22801-83 Assembly units and pipeline parts. Flanged reducing and open branches for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions 23.040.60

22802 1983 　 GOST 22802-83 Assembly units and pipeline parts. Flanged and armed open T-branches for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions 23.040.60

22803 1983 　 GOST 22803-83 Assembly units and pipeline parts. Flanged asymmetric reducing T-branches for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions 23.040.60

22804 1983 　 GOST 22804-83 Assembly units and pipeline parts. Flanged reducing T-branches for Pnom 9,81-98,1 MPa (100-1000 kgf/smsq). Construction and dimensions 23.040.60

22805 1983 　 GOST 22805-83 Assembly units and pipeline parts. Flanged inserting T-branches for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions 23.040.60

22806 1983 　 GOST 22806-83 Assembly units and pipeline parts. Flanged filllets for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions 23.040.60

22807 1983 　 GOST 22807-83 Assembly units and pipeline parts. Flanged lens metering diafragms for Pnom 9,81-63 MPa (100-630 kgf/sm sq). Construction and dimensions 23.040.60

22808 1983 　 GOST 22808-83 Assembly unints and pipelins parts. Flanged lens arms for Pnom 9,81-63 MPa (100-630 kgf/sm sq). Construction and dimensions 23.040.60

22809 1983 　 GOST 22809-83 Assembly units and pipeline parts. Flanged lenses with two arms for Pnom 9,81-40 MPa (100-400 kgf/sm sq). Contsruction and dimensions 23.040.60

22810 1983 　 GOST 22810-83 Assembly units and pipeline parts. Pocket angles for resistance thermometers and thermocouple thermometers for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions 23.040.60

22811 1983 　 GOST 22811-83 Assembily units and pipeline parts. Arms for resistance thermometers and thermocouple thermometers for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions 23.040.60

22812 1983 　 GOST 22812-83 Assembly units and pipeline parts. Pockets for resistance thermometers and thermocouple thermometers for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions 23.040.60

22813 1983 　 GOST 22813-83 Assembly units and pipeline parts. Reducing flanges for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions 23.040.60

22814 1983 　 GOST 22814-83 Assembly units and pipeline parts. Armed reducing flanges for Pnom 9,81-40 MPa (100-400 kgf/sm sq). Construction and dimensions 23.040.60

22815 1983 　 GOST 22815-83 Assembly units and pipeline parts. Flanged plugs for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions 23.040.60

22816 1983 　 GOST 22816-83 Assembly units and pipeline parts. Flanged plugs with inserts for Pnom 9,81-40 MPa (100-400 kgf/sm sq). Construction and dimensions 23.040.60

22817 1983 　 GOST 22817-83 Assembly units and pipeline parts. Flanged bent arms for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions 23.040.60

22818 1983 　 GOST 22818-83 Assembly units and pipeline parts. Elbow bends with abutments for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions 23.040.60

22819 1983 　 GOST 22819-83 Assembly units and pipeline parts. Double bends for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions 23.040.60

22820 1983 　 GOST 22820-83 Assembly units and pipeline parts. Angles for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions 23.040.60

22821 1983 　 GOST 22821-83 Assembly units and pipeline parts. Armed angles for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions 23.040.60

22822 1983 　 GOST 22822-83 Assembly units and pipeline parts. Reducing T-branches for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions 23.040.60

22823 1983 　 GOST 22823-83 Assembly units and pipeline parts. Open armed T-branches for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions 23.040.60

22824 1983 　 GOST 22824-83 Assembly units and pipeline parts. Asymmetric reducing T-brances for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions 23.040.60

22825 1983 　 GOST 22825-83 Assembly units and pipeline parts. Inserting T-branches for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions 23.040.60

22826 1983 　 GOST 22826-83 Assembly units and pipeline parts. Fillets for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions 23.040.60

22897 1986 　 GOST 22897-86 Seamless cold-deformed pipes from alloys based on titanium. Specifications 23.040.15
77.150.50

23102 1978 　 GOST 23102-78 Connecting branches of smallsized board pipe fitting. Construction and dimensions 23.040.60

23353 1978 　 GOST 23353-78 Threaded pipeline connections. Cartive nute. Construction 23.040.60

23354 1978 　 GOST 23354-78 Threaded pipeline connections. Cut ring. Construction 23.040.60

23355 1978 　 GOST 23355-78 Threaded pipeline connections. Ball nipple. Construction 23.040.60

23356 1978 　 GOST 23356-78 Threaded pipeline connections. Pressing rings. Construction 23.040.60

23357 1978 　 GOST 23357-78 Threaded pipeline connections. Joint washers for radial mounting. Construction 23.040.60

23358 1987 　 GOST 23358-87 Threaded pipe-line connections. Joint washers. Design 23.040.80

23359 1978 　 GOST 23359-78 Threaded pipeline connections. Reinforced bushings. Construction 23.040.60

23691 1979 　 GOST 23691-79 Joints of tubes with tube-plates and collectors of heat exchangers. Compression of tubes by sources of impulse pressure. General 71.120.30
23.040.60

23692 1979 　 GOST 23692-79 The joints of tube to tube-plate and collectors of heat exchangers. Requirements to the typical technology of making tube to tube-plate joints by means of energy of electrical explosion of leads 71.120.30
23.040.60

23693 1979 　 GOST 23693-79 The joints of tube to tube-plate and collectors of heat exchangers. Requirements to the typical technology for making tube to tube-plate joints by means of energy of explosion of explosives 71.120.30
23.040.60

23697 1979 　 GOST 23697-79 Welded straight-seam pipes of aluminium alloys. Specifications 23.040.15
77.150.10

23817 1979 　 GOST 23817-79 Fluorplastic sealing devices with corrugated springs for pistons. Construction and dimensions 23.040.80

23818 1979 　 GOST 23818-79 Fluorplastic sealing devices with corrugated springs for pistons. Seal housings. Constriction and dimensions 23.040.80

23819 1979 　 GOST 23819-79 Fluorplastic sealing devices with corrugated springs for pistons. Corrugated springs. Construction and dimensions 23.040.80

23820 1979 　 GOST 23820-79 Fluorplastic sealing devices with corrugated springs for pistons. Fluorplastic rings. Construction and dimensions 23.040.80

23821 1979 　 GOST 23821-79 Fluorplastic sealing devices with corrugated springs for pistons. Pins. Construction and dimensions 23.040.80

23822 1979 　 GOST 23822-79 Sealing devices for radial fixed and movable joints with increased rings compression. Construction and dimensions 23.040.80

23823 1979 　 GOST 23823-79 Sealing devices for radial reciprocating joints. Construction and dimensions 23.040.80

23824 1979 　 GOST 23824-79 Sealing devices for fixed cotter joints. Construction and dimensions 23.040.80

23825 1979 　 GOST 23825-79 Guard rings for sealing devices of radial movable and unmovable joints. Design and dimensions 23.040.80

23826 1979 　 GOST 23826-79 Sealing devices for fixed edge joints. Construction and dimensions 23.040.60

24030 1980 　 GOST 24030-80 Corrosion-resistant steel seamless tubes for power engineering industry. Specifications 23.040.10
77.140.75

24072 1980 　 GOST 24072-80 Passage tube connections with cut ring. Construction 23.040.60

24073 1980 　 GOST 24073-80 Reduce tube connections with cut ring. Construction and basic dimensions 23.040.60

24074 1980 　 GOST 24074-80 End tube connections with cut ring. Construction and basic dimensions 23.040.60

24075 1980 　 GOST 24075-80 Elbow passage tube connections with cut ring. Construction and basic dimensions 23.040.60

24078 1980 　 GOST 24078-80 Elbow passage tube connections with cut ring the end for sonnection sleeve. Construction and basic dimensions 23.040.60

24079 1980 　 GOST 24079-80 Tee passage tube connections with cut ring. Construction and basic dimensions 23.040.60

24080 1980 　 GOST 24080-80 Tee reduce tube connection with cut ring. Construction and dimensions 23.040.60

24086 1980 　 GOST 24086-80 Tee passage tube connections with cut reng and the end for connection sleeve. Construction and basic dimensions 23.040.60

24087 1980 　 GOST 24087-80 Cross passage tube connections with cut ring. Construction and basic dimensions 23.040.60

24090 1980 　 GOST 24090-80 Tube connections with cut ring. Parfition unions. Construction and basic dimensions 23.040.60

24091 1980 　 GOST 24091-80 Dead tube connections with cut ring. Construction and basic dimensions 23.040.60

24092 1980 　 GOST 24092-80 Threaded tube connections. Passage unions for welding. Construction 23.040.60

24093 1980 　 GOST 24093-80 Threaded tube connections. Union passage elbows with the end for cutting ring. Construction 23.040.60

24094 1980 　 GOST 24094-80 Threaded tube connections. Union passage tees with the end for cutting ring. Construction 23.040.60

24157 1980 　 GOST 24157-80 Plastic pipes. Method of determination of the resistance to constant internal pressure 23.040.20
83.140.30

24184 1980 　 GOST 24184-80 Flanges on two tension hoops. Design and dimensions 23.040.60

24186 1980 　 GOST 24186-80 Flanges. Construction 23.040.60

24187 1980 　 GOST 24187-80 Muffs. Construction 23.040.60

24188 1980 　 GOST 24188-80 Packings. Design 23.040.80

24189 1980 　 GOST 24189-80 Tension hoops. Design and basic dimensions 23.040.60

24190 1980 　 GOST 24190-80 Branch pipes. Design and basic dimensions 23.040.60

24191 1980 　 GOST 24191-80 Packing hoop. Design 23.040.80

24192 1980 　 GOST 24192-80 Packings for ferrules. Design 23.040.80

24193 1980 　 GOST 24193-80 Thrown-on ferrules. Design and basic dimensions 23.040.60

24194 1980 　 GOST 24194-80 Embraced ferrules. Design and basic dimensions 23.040.60

24195 1980 　 GOST 24195-80 Crampons for branch pipes. Design and basic dimensions 23.040.60

24200 1980 　 GOST 24200-80 Plug cocks. Design and basic dimensions 23.040.50

24201 1980 　 GOST 24201-80 Connecting peces and accessories of glass pipings. Specifications 23.040.50

24301 1980 　 GOST 24301-80 Bronze and brass cast bars and tubes. Technical conditions 23.040.15
77.150.30

24301 1993 　 GOST 24301-93 Bronse and brass cast bars and tubes. Specifications 23.040.15
77.150.30

24485 1980 　 GOST 24485-80 Passage tube connections with ball nipple. Construction and basic dimensions 23.040.60

24486 1980 　 GOST 24486-80 Reducing tube connections with ball nipple. Construction and basic dimensions 23.040.60

24487 1980 　 GOST 24487-80 Welding passage tube connections with ball nipple. Construction and basic dimensions 23.040.60

24488 1980 　 GOST 24488-80 End tube connections with ball nipple. Construction and basic dimensions 23.040.60

24489 1980 　 GOST 24489-80 Elbow passage tube connections with ball nipple. Construction and basic dimensions 23.040.60

24492 1980 　 GOST 24492-80 Tee passage connections with ball nipple. Construction and basic dimensions 23.040.60

24493 1980 　 GOST 24493-80 Tee reducing tube connections with ball nipple. Construction and basic dimensions 23.040.60

24499 1980 　 GOST 24499-80 Cross passage tube connections with ball nipple. Construction and basic dimensions 23.040.60

24502 1980 　 GOST 24502-80 Partition tube connections with ball nipple. Construction and basic dimensions 23.040.60

24503 1980 　 GOST 24503-80 Dead tube connections with ball nipple. Construction and basic dimensions 23.040.60

24504 1980 　 GOST 24504-80 Tube connections. End unions for connection sleeve. Construction and dimensions 23.040.60

24723 1981 　 GOST 24723-81 Sea water pipes steel zinc-plated. Elements longevity calculation 03.120
23.040
47.020.30

24856 1981 　 GOST 24856-81 Industrial pipeline fittings. Terms and definitions 01.040.23
23.060
23.040

24890 1981 　 GOST 24890-81 Welded pipes out of titanium and titanium alloys. Specifications 23.040.15
77.150.50

24935 1981 　 GOST 24935-81 Vacuum equipment. Turning screw flanges. Basic and allied dimensions 23.160
23.040.60

24950 1981 　 GOST 24950-81 Bent branches and elbows at line bends for transmission steel pipelines specifications 23.040.40

24990 1981 　 GOST 24990-81 Pipe-line valves with protective coating. Main parameters 23.040.60

25065 1990 　 GOST 25065-90 Threaded pipe fitting. Screwed-in ends case components, sealed with rubber. O-rings and their sockets. Design 23.040.60

25136 1982 　 GOST 25136-82 Pipeline connections. Methods of testind for leak tightness 23.040.60

25164 1996 　 GOST 25164-96 Connections of instruments and devices with external hydraulic and gas lines. Types, basic parameters and dimensions. Technical requirements 23.040.60

25165 1982 　 GOST 25165-82 Connections of SSI instruments and devices with external pneumatic lines. Types, basic parameters and dimensions. Technical requirements 23.040.60

25198 1982 　 GOST 25198-82 Vacuum equipment. Connections of vacuum pipe-lines. Mounting dimensions 23.160
23.040.60

25660 1983 　 GOST 25660-83 Underwater pipeline sealing flanges 10,0 mpa (100 kgf/sm2). Design and dimensions 23.040.60

25681 1983 　 GOST 25681-83 Threaded pipeline connections. Rotary nipples. Design 23.040.60

25682 1983 　 GOST 25682-83 Threaded pipeline connections. Hollow bolts. Construction and basic dimensions 23.040.60

25683 1983 　 GOST 25683-83 Rotary threaded pipeline connections with a hollow bolt. Construction and basic dimensions 23.040.60

25756 1983 　 GOST 25756-83 Bellows expansion joints and (bellows) seals. Terms and definitions 01.040.23
23.040.80

26304 1984 　 GOST 26304-84 Pipe-line industrial valves supplied for export. General specifications 23.040.60

26337 1984 　 GOST 26337-84 Threaded piping joints. Straight soldering unions for axial mounting. Construction and dimensions 23.040.60

26338 1984 　 GOST 26338-84 Threaded piping joints. Tolerances of form and position 23.040.60

26349 1984 　 GOST 26349-84 Tube connections and fittings. Nominal (conditional) pressures. Series 23.040.60

26350 1984 　 GOST 26350-84 Tube connections and fittings. Connecting threads. Series 23.040.60

26526 1985 　 GOST 26526-85 Vacuum equipment. Flanger joint for highvacuum system. Design,dimensions and technical requirements 23.040.60
23.160

27036 1986 　 GOST 27036-86 Metal bellows expansion joints and seals. General specifications 23.040.01
47.020.30

27450 1987 　 GOST 27450-87 Tubes of copper and copper-zinc alloys. Method for determination of impurity of inner surface 23.040.15
77.150.30

27456 1987 　 GOST 27456-87 Theaded pipelineconnections. Procedure of testing on vibrostrength 23.040.60

27581 1988 　 GOST 27581-88 Glass valves. Main parameters 23.040.50

28016 1989 　 GOST 28016-89 Threaded pipeline connections. Welded conical nipple. Construction 23.040.60
23.040.99

28191 1989 　 GOST 28191-89 Clamp for hose. Specifications 23.040.70

28338 1989 　 GOST 28338-89 Tube connections and fitting. Conventional passages. Series 23.040.60

28697 1990 　 GOST 28697-90 Programme and test methods of bellows compensators and seals. General requirements 23.040.80

28800 1990 　 GOST 28800-90 Metal pipes. Method for determination of moisture on the internal surface of pipes 23.040.10

28918 1991 　 GOST 28918-91 Tnreaded pipe littings. Thrust and clamping rings. Construction 23.040.60

28941-01 1991 　 GOST 28941.1-91 Flare straight fittings. Construction 23.040.60

28941-02 1991 　 GOST 28941.2-91 Flare fittings with reducing conplings. Construction 23.040.60

28941-03 1991 　 GOST 28941.3-91 Flare reducing fittings with inside cone. Construction 23.040.60

28941-04 1991 　 GOST 28941.4-91 Flare stud fittings. Construction 23.040.60

28941-05 1991 　 GOST 28941.5-91 Flare stud fittings with inside cone. Construction 23.040.60

28941-06 1991 　 GOST 28941.6-91 Flare bulkheand fittings. Construction 23.040.60

28941-07 1991 　 GOST 28941.7-91 Flare straight elbow fittings. Construction 23.040.60

28941-08 1991 　 GOST 28941.8-91 Flare stud elbow fittings. Construction 23.040.60

28941-09 1991 　 GOST 28941.9-91 Flare straight reducings branch tee fittings. Construction 23.040.60

28941-10 1991 　 GOST 28941.10-91 Flare reducing branch tee fittings. Construction 23.040.60

28941-11 1991 　 GOST 28941.11-91 Flare cross straight fittings. Construction 23.040.60

28941-12 1991 　 GOST 28941.12-91 Flare fittings. Flared conplings. Construction 23.040.60

28941-13 1991 　 GOST 28941.13-91 Flare fittings. Reducing conplings. Construction 23.040.60

28941-14 1991 　 GOST 28941.14-91 Flare fittings. Straight conplings. Construction 23.040.60

28941-15 1991 　 GOST 28941.15-91 Flare fittings. Straight conplings with inside cone. Construction 23.040.60

28941-16 1991 　 GOST 28941.16-91 Flare fittings. Stud conplings. Construction 23.040.60

28941-17 1991 　 GOST 28941.17-91 Flare fittings. Stud conplings with inside cone. Construction 23.040.60

28941-18 1991 　 GOST 28941.18-91 Flare fittings. Bulkhead conplings. Construction 23.040.60

28941-19 1991 　 GOST 28941.19-91 Flare fittings. Unequal elbows. Construction 23.040.60

28941-20 1991 　 GOST 28941.20-91 Flare fittings. Stud elbows. Construction 23.040.60

28941-21 1991 　 GOST 28941.21-91 Flare fittings. Reducing branch tees. Construction 23.040.60

28941-22 1991 　 GOST 28941.22-91 Flare fittings. Stud tees. Construction 23.040.60

28941-23 1991 　 GOST 28941.23-91 Flare fittings. Straight crosses. Construction 23.040.60

28941-24 1991 　 GOST 28941.24-91 Flare fittings. Snugle covers. Construction 23.040.60

28941-25 1991 　 GOST 28941.25-91 Flare fittings. Snugle plugs. Construction 23.040.60

28941-26 1991 　 GOST 28941.26-91 Flare conplings. Union nuts. Construction 23.040.60

28941-27 1991 　 GOST 28941.27-91 Flare fittings. Sleeves. Construction 23.040.60

28941-28 1991 　 GOST 28941.28-91 Flare fittings. O-rings. Construction 23.040.60

28942-01 1991 　 GOST 28942.1-91 Fittings made on the thread. Swiveling adaptors for O-ring face seal. Construction 23.040.60

28942-02 1991 　 GOST 28942.2-91 Fittings made on the thread. Stud elbows for O-ring face seal. Construction 23.040.60

28942-03 1991 　 GOST 28942.3-91 Fittings made on the thread. Stud straight tees for O-ring face seal. Construction 23.040.60

28942-04 1991 　 GOST 28942.4-91 Fittings with compression rings and O-ring face seal. Construction 23.040.60

28942-05 1991 　 GOST 28942.5-91 Fittings with compression rings, swiveling stud elbow type and O-ring face seal. Construction 23.040.60

28942-06 1991 　 GOST 28942.6-91 Fittings with compression rings, reducing stud tee type O-ring face seal. Construction 23.040.60

28942-07 1991 　 GOST 28942.7-91 Fittings with ball sleeve, stud type with O-ring face seal. Construction 23.040.60

28942-08 1991 　 GOST 28942.8-91 Fittings with ball sleeve, stud elbow type with O-ring face seal. Construction 23.040.60

28942-09 1991 　 GOST 28942.9-91 Fittings with ball sleeve straight stud branch tee type with O-ring face seal. Construction 23.040.60

28968 1991 　 GOST 28968-91 Rubber hoses. Determination of abrasion resistance of the outer cover 23.040.70
83.140.40

29324 1992 　 GOST 29324-92 [withdrawn => GOST ISO 161-1-2004]
Thermoplastics pipes for the transport of fluids. Nominal outside diameters and nominal pressures 23.040.20
83.140.30

29325 1992 　 GOST 29325-92 Plastics pipes. Measurement of dimensions 23.040.20
83.140.30

30432 1996 　 GOST 30432-96 Metal tubes. Selection of testings, tube stocks and specimens for mechanic and technological tests 77.040
23.040.10
23.040.15

30563 1998 　 GOST 30563-98 Seamless cold-worked carbon and alloy steel tubes for special purposes. Specifications 23.040.10

30564 1998 　 GOST 30564-98 Seamless hot-worked carbon and alloy steel pipes and tubes with special properties. Specifications 23.040.10

30753 2001 　 GOST 30753-2001 Carbon and low-alloy steel butt-weldings fittings. Sharply curved bends type 2D (R=DN). Design 23.040.40

31246 2004 　 GOST 31246-2004 Industrial cleanliness. The hydromechanical method of pipelines cleaning from contaminations in gas and fluid systems of machines and mechanisms 23.040.10

50027 1992 　 GOST R 50027-92 Rubber and plastics hoses. Assessment of ozone resistance under static conditions 23.040.70
83.140.40

50028 1992 　 GOST R 50028-92 Rubber or plastics hoses and tubing. Bending test 23.040.70
83.140.40

50073 1992 　 GOST R 50073-92 Pipelines flange types joint fittings. Specifications 23.040.60

50392 1992 　 GOST R 50392-92 Fittings for metal bellows expansion joints and seals. Types, main parameters and dimensions. General specifications 23.040

50430 1992 　 GOST R 50430-92 Pipeline gate valves-rates of gates sealibility 23.040

50618 1993 　 GOST R 50618-93 Metal singlelayer bellows for compensation. Types, general specifications 23.040.80

50619 1993 　 GOST R 50619-93 Metal multylevels bellows for compensation. Types, general requirements 23.040.80

50671 1994 　 GOST R 50671-94 Metal bellows expansion joints for the pipelines of electric power stations and heat-supply systems. Types, basic parameters and general technical requirements 23.040.99
27.100

50823 1995 　 GOST R 50823-95 Duble-socket fittings for unplasticized polyvinil chloride pressure pipes with elastic sealing ring type joints. Minimum depths of engagement 23.040.45
83.140.30

50824 1995 　 GOST R 50824-95 Single sockets for unplasticized polyvinyl chloride and chlorinated polyvinyl chloride pressure pipes with elestic sealing ring type joints. Minimum depths of engagement 23.040.45
83.140.30

50825 1995 　 GOST R 50825-95 Unplasticized polyvinyl chloride pipes and fittings. Determination of the Vicat softening temperature 23.040.45
23.040.20

50838 1995 　 GOST R 50838-95 Polyethylene pipes for the supply of gazeous fuel. Specifications 23.040.20

51164 1998 　 GOST R 51164-98 Steel pipe mains. General requirements for corrosion protection 23.040

51571 2000 　 GOST R 51571-2000 Metal bellows expansion joints and seals. General technical requirements 23.040.80
21.140

51573 2000 　 GOST R 51573-2000 Tubes from alloyed brasses for heat-exchange apparatus. Specifications 77.150.30
23.040.15
77.150.99

51613 2000 　 GOST R 51613-2000 Pressure pipes made of unplasticized polyvinylchloride. Specifications 23.040.20

52209 2004 　 GOST R 52209-2004 Hose assemblies for gas burners and gas appliances. General technical requirements and test methods 23.040.70

52318 2005 　 GOST R 52318-2005 Round copper tubes for water and gas. Specifications 23.040.15

52376 　 GOST R 52376-2005 Heat-resistant spiral-wound gaskets. Types. Main dimensions 23.040.60

52568 2006 　 GOST R 52568-2006 Steel pipes with defensive covering for main gas and oil pipelines. Specifications 23.040.10

52715 2007 ★ GOST R 52715-2007 Vacuum equipment. Pipeline fittings. Mounting dimensions 23.040
23.160

52760 2007 ★ GOST R 52760-2007 Pipeline valves. Requirements for the marking and distinctive painting 23.040.60

52779 2007 ★ GOST R 52779-2007 Polyethylene fittings for gas pipelines. General specifications 23.040.45
83.140.30

52922 2008 ★ GOST R 52922-2008 Fittings from copper and copper alloys for capillary soldering to copper tubes. Specifications 23.040.15

52948 2008 ★ GOST R 52948-2008 Fittings from copper and copper alloys with compression ends for use with copper tubes. Specifications 23.040.15

52949 2008 ★ GOST R 52949-2008 Fittings-adapters from copper and copper alloys for connecting the pipelines. Specifications 23.040.15

ISO 00161-01 2004 　 GOST ISO 161-1-2004 Thermoplastics pipes for the conveyance of fluids. Nominal outside diameters and nominal pressures. Metric series 23.040.20
83.140.30

ISO 00580 2008 ★ GOST R ISO 580-2008 Plastics piping systems. Injection-moulded thermoplastics fittings. Methods for determination of fittings appearance alteration after heating 23.040.45
83.140.30

ISO 03126 2007 ★ GOST R ISO 3126-2007 Plastics piping systems. Plastics components of piping systems. Determination of dimensions 23.040.20
83.140.30

ISO 03183-01 2007 ★ GOST R ISO 3183-1-2007 Steel pipes for pipelines. Specifications. Part 1. Requirements for class A pipes 23.040.10

ISO 03183-02 2007 ★ GOST R ISO 3183-2-2007 Steel pipes for pipelines. Specifications. Part 2. Requirements for class B pipes 23.040.10

ISO 03183-03 2007 ★ GOST R ISO 3183-3-2007 Steel pipes for pipelines. Specifications. Part 3. Requirements for class C pipes 23.040.10

ISO 04065 2005 　 GOST ISO 4065-2005 Thermoplastics pipes. Universal wall thickness table 23.040.20

ISO 10014 　 GOST R ISO/TR 10014-2005 Guidelines for managing the economics of quality 23.040.20
23.040.45

ISO 10124 1999 　 GOST R ISO 10124-99 Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes. Ultrasonic testing for the detection of laminar imperfections 19.100
23.040.10

ISO 10332 1999 　 GOST R ISO 10332-99 Seamless and welded ( except submerged arc-welded) steel tubes for pressure purposes. Ultrasonic testing for the verification of hydraulic leak-tightness 23.040.10
19.100

ISO 10543 1999 　 GOST R ISO 10543-99 Seamless and hot-stretch-reduced welded steel tubes for pressure purposes. Ultrasonic thickness testing 23.040.10
19.100

23.060 弁

Sort Mk 規格番号規格名称(英語) 国際規格分類
( ICSコードの説明 )

00004-114 1984 　 GOST 4.114-84 Product quality ratings system. Industrial pipe-line fittings. Nomenclature of main characteristics 03.120
23.060

00004-412 1986 　 GOST 4.412-86 Index system of production quality. Butterfly and spherical valves for hydraulic turbines. Index nomenclature 27.140
03.120
23.060

03326 1986 　 GOST 3326-86 Stop valves, check lift and swing valves. Overal dimensions 23.060

03706 1993 　 GOST 3706-93 Gate valves. End-to-end lengths 23.060.30

05761 1974 　 GOST 5761-74 Qlobe valves phom 25 mpa (250 kgf/sq cm). General specifications 23.060

05762 1974 　 GOST 5762-74 [withdrawn]
Gate vaives pnom 25 mpa (250 kgf/sq cm). General specifications 23.060.30

05762 2002 　 GOST 5762-2002 Pipeline industrial valves. Gate valves PN<=250. General specifications 23.060.30

09697 1987 　 GOST 9697-87 Stop valves. Main parameters 23.060

09698 1986 　 GOST 9698-86 Gate valves. Main technical data 23.060.30

09701 1979 　 GOST 9701-79 Diaphragm and pinch control valves. Basic parameters 23.060.40

09702 1987 　 GOST 9702-87 Play and ball valves. Basic parameters 23.060.20

09789 1975 　 GOST 9789-75 Safety full-lifted flanged steel valve for P nom 1,6 and 4,0 MPa (16 and 40 kgf/cm2) 23.060

10811 1964 　 GOST 10811-64 Pipeline valves for general porposes. Double ported control valves for py 16; 40 and 64 kgf/sq. Cm. Dimensions for connecting diaphragm operator 23.060.40

11823 1991 　 GOST 11823-91 Lift check values for Pnom < or = 25 MPA (250 KGF/SM2). General specifications 23.060.50

12521 1989 　 GOST 12521-89 Batterfly valves. Basic parameters 23.060.30

12532 1988 　 GOST 12532-88 Directacting safety valves. Main technical data 23.060

12547 1976 　 GOST 12547-76 Level gauges with shut-off device. Types and parameters 23.060.20

12678 1980 　 GOST 12678-80 Direct acting pressure regulators main technical data 23.060.40

12893 1983 　 GOST 12893-83 Single-seated and double-seated control valves. General technical reguirements 23.060.40

13252 1991 　 GOST 13252-91 Swing check valves for Pnom < = 25 MPa (250 kgf/cm2 ). General specifications 23.060.30

13547 1979 　 GOST 13547-79 Butterfly wicket valves for Pnom to 2,5 MPa (25 kgf/cm2). General specifications 23.060.30

16324 1983 　 GOST 16324-83 Cast iron diaphragm control valves with pneumatic diaphragm actuator 23.060

16587 1971 　 GOST 16587-71 Safety valves, control valves and pressure regulators. End to end length 23.060

19500 1974 　 GOST 19500-74 Malleable iron chaklift screwed and flanged valves for pnom 1,6 mpa (16 kgf/sg cm) 23.060.50

20294 1974 　 GOST 20294-74 Acid-proof steel straightwaytop valves with for pnom 1,6 mpa (16 kgf/cm2) 23.060

21345 1978 　 GOST 21345-78 Lifting-plug, ball and cylindrical cocks for Pnom to<=25 MPa (250 kgf/sq sm). General specifications 23.060

21804 1983 　 GOST 21804-83 [withdrawn]
Shut-off devices for cylinders with liquefied gas of py1, 6 mpa (16 kgf/cm2). Specifications 23.060.20

21804 1994 　 GOST 21804-94 Shut-off devices for cylinders with liquefied hydrocarbon gases for pressure to 1,6 MPa. General specificatios 23.060.10

21805 1983 　 GOST 21805-83 [withdrawn]
Pressure requlators for liquated gas of py 1,6 mpa. Specifications 23.060.40

21805 1994 　 GOST 21805-94 Pressure regulators for liquefied hygrocarbon gases for pressure to 1,6 MPa. General specifications 23.060.40
97.040.50

22223 1976 　 GOST 22223-76 Shut-off device for pressur gauges. Main technical data 23.060

22241 1976 　 GOST 22241-76 Transportation plugs. General specifications 23.060.30

22309 1977 　 GOST 22309-77 Pipeline valves. Electrotransmissions. Basic parameters 23.060

22413 1989 　 GOST 22413-89 Pipeline valves with electromagnetic drives. Main parameters 23.060.30

22445 1988 　 GOST 22445-88 Check valves. Basic parameters 23.060.30

23866 1987 　 GOST 23866-87 Single-seated, bouble seated and cage control valves. Basic parameters 23.060
23.060.40

24856 1981 　 GOST 24856-81 Industrial pipeline fittings. Terms and definitions 01.040.23
23.060
23.040

25197 1982 　 GOST 25197-82 Direct and angle vacuum valves. Mounting dimensions 23.160
23.060.10

25923 1989 　 GOST 25923-89 Batterfly control valves. Basic parameters 23.060.30

27477 1987 　 GOST 27477-87 Check valves. Basic parameters 23.060.50

28343 1989 　 GOST 28343-89 Flanged steel ball valves. Technical requirements 23.060.20

28908 1991 　 GOST 28908-91 Ball valves and disk gafe valve. End-to-end, face-to-fece dimension 23.060.20

50333 1992 　 GOST R 50333-92 Selfacting individual values of circular form for piston compressors. Types and fitting dimensions 23.060
23.140

50360 1992 　 GOST R 50360-92 Gate valves. End-to-end lengths 23.060.30

51842 2001 　 GOST R 51842-2001 Automatic shut-off valves for gas burners and gas appliances. General technical reguirements and test methods 23.060

51982 2002 　 GOST R 51982-2002 Gas appliances pressure governors for inlet pressure up to 20 kPa. General technical requirements and test methods 23.060.40

51983 2002 　 GOST R 51983-2002 Multifunctional controls for gas burning appliances. General technical requirements and test methods 23.060

52057 2003 　 GOST R 52057-2003 Taps for gas burning appliances. General technical requirements and test methods 23.060

52720 2007 ★ GOST R 52720-2007 Pipeline valves. Terms and definitions 01.040.23
23.060

23.080 ポンプ
注: 真空ポンプ→ 23.160
注: 流体動力用ポンプ→ 23.100.10

Sort Mk 規格番号規格名称(英語) 国際規格分類
( ICSコードの説明 )

00002-782 1968 　 GOST 2.782-68 Unified system for design documentation. Graphical identifications. Hydraulic and pneumatic pumps and motors 01.080.30
23.080

00004-118 1984 　 GOST 4.118-84 Product reliability index system. Pumping equipment. Basic index nomenclature 03.120
23.080

00005-0413 1970 　 GOST 5.413-70 The mater cooled diode type sputter-ion pump НМДО-01-1 (НОРД-100) with the power supply БП-150. Quality requirements for certified products 23.080

00005-1300 1972 　 GOST 5.1300-72 The water-cooled diode type НМДО-025-1 (НОРД-250) sputter-ion pump with the power supply type БП-100. Quality requirements for certified products 23.080

00005-2019 1973 　 GOST 5.2019-73 Pump single-stage monoblock type ГНОМ-10-10. Quality requirements for certified products 23.080

06000 1988 　 GOST 6000-88 Condensate centrifugal pumps. Parameters and dimensions 23.080

06134 1987 ★ GOST 6134-87 [withdrawn]
Rotodynamic pumps. Methods of testing 23.080

06134 2007 ★ GOST 6134-2007 Rotodynamic pumps. Test methods 23.080

10272 1987 　 GOST 10272-87 Double entry centrifugal pumps. Technical requirements 23.080

10392 1989 　 GOST 10392-89 Whirling and centrifugal-whirling pumps. Types and basic parameters 23.080

10407 1988 　 GOST 10407-88 Centrifugal multistage segmental pumps. Types and basic parameters 23.080

10428 1989 　 GOST 10428-89 Centzifugal matez well electzicallУ dzivenpumr units. Basic pazametezs amd dimensions 23.080

10578 1995 　 GOST 10578-95 Diesel engine fuel pumps. General specifications 43.060.40
23.080

12052 1990 　 GOST 12052-90 Piston and plunger pumps. Range of basic parameters and dimensions 23.080

12124 1987 　 GOST 12124-87 Centrifugal oil pipe-line pumps 23.080

14707 1982 　 GOST 14707-82 Rotary vane and valve vacuum pumps. Tupes and basic parametrs 23.080

17221 1991 　 GOST 17221-91 Transformer hermetic centrifugal electric pumps. Types. Basic parameters and dimensions 23.080

17335 1979 　 GOST 17335-79 Positive-displacement pumps. Acceptance rules and test methods 23.080

17398 1972 　 GOST 17398-72 Pumps. Terms and definitions 01.040.23
23.080

18138 1972 　 GOST 18138-72 Lubricating piston pumps. Ranges of basic parameters 21.260
23.080

18863 1989 　 GOST 18863-89 Helical rotor pumps. Basic parameters 23.080

19027 1989 　 GOST 19027-89 Gear pumps. Basic parameters 23.080

20572 1988 　 GOST 20572-88 Two-screw pumps and pump units. Types and basic parameters 23.080

20763 1985 　 GOST 20763-85 Centrifugal immersion electric pumps for polluted water. Basic parameters 23.080

20791 1988 　 GOST 20791-88 Hermetic centrifugal electric pumps. General technical requirements 23.080

20883 1988 　 GOST 20883-88 Three-screw pomps and pump units. Types and basic parameters 23.080

22247 1996 　 GOST 22247-96 Centrifugal and sectionpumps for handling water. Basic parameters and dimensions. Safety requirements. Control methods 23.080

22337 1977 　 GOST 22337-77 Centrifugal feed pumps. Basic parameters 23.080

22465 1988 　 GOST 22465-88 Centrifugal booster pumps. Main parameters 23.080

24464 1980 　 GOST 24464-80 Feed pumps for nuclear power plant. General technical requirements 23.080
27.120.99

24465 1980 　 GOST 24465-80 Condensate pumps for nuclear power plant. General technical requirements 23.080
27.120.99

24656 1981 　 GOST 24656-81 Circulation frumps for first contour energy blocks of atomic power station with reactor vver. Type, basic parameters and general requirements 23.080
27.120.99

26287 1984 　 GOST 26287-84 Household electric pumps. General specifications 23.080
97.180

27854 1988 　 GOST 27854-88 Rotoduhatic pumps. Mach parameters series 23.080

50981 1996 　 GOST R 50981-96 Hand-holding household pumps. General safety requirements 23.080
97.180

50987 1996 　 GOST R 50987-96 Hydraulically operated portable emergency and rescue tools. Muscular operated pump unit. Basic parameters and dimensions. Methods of testing 13.200
23.080

51543 2000 　 GOST R 51543-2000 Hydraulically operated portable emergency and rescue tools. Hydraulic power unit with electric drive. Basic parameters and dimensions. Safety requirements. Methods of testing and control 13.200
23.080

51545 2000 　 GOST R 51545-2000 Hydraulically operated portable emergency and rescue tools. Hydraulic power unit with motor drive. Basic parameters and dimensions. Safety requirements. Methods of testing and control 13.200
23.080

52743 2007 ★ GOST R 52743-2007 Pumps and pump units for pumping of liquids. General safety requirements 23.080

52744 2007 ★ GOST R 52744-2007 Submersible pumps and pump units. Safety requirements 23.080

IEC 60335-02-41 1998 　 GOST R IEC 60335-2-41-98 Safety of household and similar electrical appliances. Particular requirements for pumps and test methods 97.100
13.120
23.080
97.180

IEC 60335-02-51 2000 　 GOST R IEC 60335-2-51-2000 Safety of household and similar electrical appliances. Particular requirements for stationary circulation pumps for heating and service water installations and test methods 23.080
91.140.10
97.030
97.180

23.100 流体動力システム
注: 作動油→ 75.120

Sort Mk 規格番号規格名称(英語) 国際規格分類
( ICSコードの説明 )

00002-704 1976 　 GOST 2.704-76 Unified system for design documentation. Rules for making hydraulic and pneumatic diagrams 01.100.20
23.100

00002-780 1968 　 GOST 2.780-68 [withdrawn?]
Unified system for design documentation. Graphical identifications. Elements of hydraulic and pneumatic circuits 01.080.30
23.100

00002-781 1968 　 GOST 2.781-68 [withdrawn]
Unified system for design documentation. Graphical symbols for hydraulic and pneumatic directional and control valves 01.080.30
23.100

00002-782 1996 　 GOST 2.782-96 Unified system for design documentation. Graphic designations. Hydraulic and pneumatic machines 01.080.30
23.100

00004-037 1990 　 GOST 4.37-90 System of production quality indexes. Positive displacement hydraulic drives, pneumatic drives and lubrication systems. Nomenclature of indeces 03.120
23.100

00005-1861 1973 　 GOST 5.1861-73 Pneumatic directional control valves with 3 ports В76-21, БВ76-21, ИВ76-21, КВ76-21, МВ76-21, ОВ76-21, ГВ76-21, ДВ76-21. Quality requirements of certified products 23.100

00005-1862 1973 　 GOST 5.1862-73 Pneumatic power amplifers. Quality reguirements of certified products 23.100

00012-02-040 1979 　 GOST 12.2.040-79 Occupational safety standards system. Hydraulic drives and lubricating system. General safety requirements 13.100
23.100
21.260

00012-02-086 1983 　 GOST 12.2.086-83 Occupational safety standards system. Positive-displacement hydraulic drives and lubricating systems. General safety requirements for mounting, testing and maintenance 13.100
23.100
21.260

00012-02-101 1984 　 GOST 12.2.101-84 Occupational safety standards system. Pheumatic drives. General design safety requirements 13.100
23.100

00012-03-001 1985 　 GOST 12.3.001-85 Occupational safety standards system. Pneumatic drives. General safety requirements for mounting, testing and maintenance 13.100
23.100

06540 1968 　 GOST 6540-68 Hydraulic and pneumatic cylinders. Basic parameters 23.100.20

12445 1980 　 GOST 12445-80 Hydraulic and pneumatic drives and lubricating systems. Nominal pressures 23.100
21.260

12447 1980 　 GOST 12447-80 Hydraulic and pneumatic drives and lubricating systems. Standard diameters 23.100
21.260

12448 1980 　 GOST 12448-80 Hydraulic and pneumatic drives and lubricating systems. Nominal volumes 23.100
21.260

12449 1980 　 GOST 12449-80 Pneumatic drives. Nominal flows of air 23.100

12466 1980 　 GOST 12446-80 Hydraulic and pneumatic drives and lubricating systems. Nominal freguecies of rotation 23.100
21.260

12853 1980 　 GOST 12853-80 Positive-displacement hydraulic drives, pneumatic actuators and lubricating systems. Connecting threads 23.100
21.260

13824 1980 　 GOST 13824-80 Positive-displacement hydraulic drives, pneumatic actuators and lubricating systems. Nominal capacity per revolution 23.100
21.260

13825 1980 　 GOST 13825-80 Hydraulic drives and lubricating systems. Nominal flows of liquid 23.100
21.260

14057 1968 　 GOST 14057-68 Gear hydraulic pumps. Basic parameters 23.100.10

14058 1968 　 GOST 14058-68 Vane hydraulic pumps. Basic parameters 23.100.10

14059 1968 　 GOST 14059-68 Piston hydraulic pumps. Basic parameters 23.100.10

14060 1968 　 GOST 14060-68 Gear hydraulic motors. Basic parameters 23.100.10

14061 1968 　 GOST 14061-68 Vane hudraulic motors. Ranges of basic parameters 23.100.10

14062 1968 　 GOST 14062-68 Piston hydraulic motors. Basic parameters 23.100.10

14063 1968 　 GOST 14063-68 Hydraulic and pneumatic valves. Basic parameters 23.100

14064 1968 　 GOST 14064-68 Hydraulic accumulators. Basic parameters 23.100

14066 1968 　 GOST 14066-68 Filters of hydraulic and lubricating systems. Ranges of basic parameters 23.100.60
21.260

14658 1986 　 GOST 14658-86 Positive-displacement pumps for hydraulic drives. Acceptance rules and methods of testing 23.100.10

15108 1980 　 GOST 15108-80 Positive-displacement hydraulic drives, pneumatic drives and lubricating systems. Marking, packing, transportation and storage 23.100
21.260

15608 1981 　 GOST 15608-81 Pneumatic piston cylinders. Specifications 23.100.20

16514 1987 　 GOST 16514-87 Positive-displacement hydraulic drives. Hydraulic cylinders. General technical requirements 23.100.20

16514 1996 　 GOST 16514-96 Hydraulic fluid power. Hydraulic cylinders. General technical requirements 23.100.20

16515 1989 　 GOST 16515-89 Positive-displacement hydraulic drives and lubricating systems. Filters and filter elements. General technical requirements 23.100.60

16516 1980 　 GOST 16516-80 Hydraulic and pneumatic drives and lubricating systems. Conventional passages 23.100
21.260

16769 1984 　 GOST 16769-84 Hydraulic accumulators. General technical requirements 23.100

16770 1986 　 GOST 16770-86 Tanks for positive-displacement hydraulic drives and lubrication systems. General technical requirements 23.100.99
21.260

17069 1971 　 GOST 17069-71 Hydrodynamic transmission. Methods of stand tests 23.100

17108 1986 　 GOST 17108-86 Positive-displacement hydraulic drive and lubricating systems. Methods of parameters measurement 23.100
21.260

17216 2001 　 GOST 17216-2001 Industrial cleanliness. Grades of liquids purity 23.100
25.060
75.120
49.080

17411 1991 　 GOST 17411-91 Positive-displacement hydraulic drives. General technical requirements 23.100

17752 1981 　 GOST 17752-81 Hydraulic and pneumatic drive. Terms and definitions 01.040.23
23.100

18460 1991 　 GOST 18460-91 Pneumatic drives. General technical requirements 23.100

18464 1987 　 GOST 18464-87 Hydraulic cylinders. Acceptance rules and methods of testing 23.100.20

18464 1996 　 GOST 18464-96 Hydraulic fluid power. Hydraulic cylinders. Acceptance rules and test methods 23.100.20

19535 1974 　 GOST 19535-74 Flange joints for hydraulic and lubricating systems. Specifications 23.100
21.260
23.040.60

19749 1984 　 GOST 19749-84 Fixed detachable joints for special purpose hardware of pneumohydraulic systems. Closet gates. Types and technical requirements 23.100.99

19750 1984 　 GOST 19750-84 Flat metal gasket joint gate end part. Design and dimensions 23.100.99

19751 1984 　 GOST 19751-84 Flat metal gasket joint gate seats. Design and dimensions 23.100.99

19752 1984 　 GOST 19752-84 Sealing metal flat gaskets for closed gates. Specifications 23.100.60

19753 1984 　 GOST 19753-84 Conical metal gasket joint gate end part. Design and dimensions 23.100.99

19754 1984 　 GOST 19754-84 Conical metal gasket joint gate seats. Design and dimensions 23.100.99

19755 1984 　 GOST 19755-84 Sealing metal conical gaskets for closed gates. Specifications 23.100.60

20245 1974 　 GOST 20245-74 Hydraulic valves. Acceptance rules and methods of tests 23.100

20719 1983 　 GOST 20719-83 Hydraulic motors. Acceptance and methods of tests 23.100.10

21251 1985 　 GOST 21251-85 Spool-type pneumatic directional control valves with 5 ports. Specifications 23.100.50

21324 1983 　 GOST 21324-83 Air check valves for nominal pressure 1 MPa ( 10 kgf/sq sm). Specifications 23.100.50

21329 1975 　 GOST 21329-75 Edge filters at pressure up to 63 bar. Specifications 23.100.60

21976 1976 　 GOST 21976-76 Rotary plate throttling directional control valve. Basic dimensions 23.100
21.260

22976 1978 　 GOST 22976-78 Hydraulic drives, pneumatic actuators and lubricating systems. Acceptance rules 23.100
21.260

24242 1989 　 GOST 24242-89 Hydraulic fluid power. Loter designation of connecting ports of hydraulic eguipment 01.075
23.100

24242 1997 　 GOST 24242-97 Hydraulic fluid power. Identification of component ports, subplates, control devices and electromagnets 23.100

24243 1990 　 GOST 24243-90 Hydraulic drives and lubricating systems. Filters. Overall and mounting dimensions 23.100.60

24679 1981 　 GOST 24679-81 Hydraulic four-way distributers for nominal pressure 32 MPa. Specifications 23.100.50

25277 1982 　 GOST 25277-82 Hydraulic power drives and lubricating systems. Filter elements. Acceptance and testing methods 23.100.60

25453 1989 　 GOST 25453-89 Pneumatic valves and air conditioners. Nominal diameters and connecting threads 23.100
23.120

25476 1982 　 GOST 25476-82 Hudraulic fluid power and lubricating systems. Filters. Acceptance and methods of tests 23.100.60

26005 1983 　 GOST 26005-83 Pressure switches for Pnom up to 320 MPa (320 kgf/sq cm). Specifications 23.100.50

26058 1985 　 GOST 26058-85 Industrial robots for arc welding. General specifications 23.100.10
25.040.30

26059 1989 　 GOST 26059-89 Industrial robots. Pneumatic motors of actuating mechanisms. Types, basic parameters and mounting dimensions 25.040.30
23.100.10

26070 1983 　 GOST 26070-83 Liquid filters and separators. Terms and definitions 01.040.23
23.100.60

26496 1985 　 GOST 26496-85 Hydraulic accumulators. Acceptance rules and test methods 23.100.10

26890 1986 　 GOST 26890-86 Hydraulic valves. Connecting dimensions of subplates mounting surfaces 23.100

27790 1988 　 GOST 27790-88 Slip-in cartridge hydraulic valves mounting dimensions of cavities 23.100
21.260

27851 1988 　 GOST 27851-88 Hydraulic drive volumetric pumps. Accelerated comparative life tests 23.100.10

28028 1989 　 GOST 28028-89 Industrial purity. Hydraulic drives. General requirements and norms 03.120.10
23.100

28160 1989 　 GOST 28160-89 Marine locomotive and industrical engines. Cooling sistems pumps. Pumping calculation method 23.100.10

28413 1989 　 GOST 28413-89 Hydraulic drive volumetric pumps and motors. Accelerated tests for reliability 23.100.10

28761 1990 　 GOST 28761-90 Hydraulic drives. Hydraulic semi-rotary actuators. General technical requirements 23.100

28971 1991 　 GOST 28971-91 Hudraulic fluid power. Servovalves. Test methods 23.100.50

28988 1991 　 GOST 28988-91 Fluid power systems. Vibration characteristics, vibration tests 21.260
23.100

29014 1991 　 GOST 29014-91 Pneumatic drives. General test methods 23.100

29015 1991 　 GOST 29015-91 Hydraulic drives. General test methods 23.100

30362-01 1996 　 GOST 30362.1-96 Hydraulic fluid power. Single rod cylinders for nominal pressure of 25 MPa. Mounting dimensions 23.100.20

30362-02 1996 　 GOST 30362.2-96 Hydraulic fluid power. Single rod cylinders for nominal pressure of 25 MPa. Mounting dinensions of water supply ports 23.100.20

30481 1997 　 GOST 30481-97 Hydraulic fluid power. Four- and five-port servovalves. Mounting dimensions of subplates joint surfaces 23.100.01

30526 1997 　 GOST 30526-97 Pneumatic fluid power. Compressed air dryers. General technical requirements and test methods 23.100.99

30539 1997 　 GOST 30539-97 Pneumatic fluid power. Quick-action couplings for nominal pressures 1,0; 1,6 and 2,5 MPa. Connecting dimensions, technical requirements and test methods 23.100

30869 2003 　 GOST 30869-2003 Safety of machinery. Safety requirements for fluid power systems and their components. Pneumatics 13.110
23.100

31177 　 GOST 31177-2003 Safety of machinery. Safety requirements for fluid power systems and their components. Hydraulics 13.110
23.100

31247 2004 　 GOST 31247-2004 Industrial cleanliness. Determination of fluid sample contamination using automatic particle counter 23.100

50552 1993 　 GOST R 50552-93 Industrial purity. Filtering materials. Specifications 03.120.10
23.100.60

50553 1993 　 GOST R 50553-93 Industrial purity. Filters and their elements. Specification 03.120.20
23.100.60

50554 1993 　 GOST R 50554-93 Industrial purity. Filters and their elements. Testing methods 03.120.20
23.100.60

50556 1993 　 GOST R 50556-93 Hydraulic fluid power. Particulate contamination analysis. Extraction of fluid samples from lines of an operating systems 23.100

50557 1993 　 GOST R 50557-93 Hydraulic fluidpower. Fluid sample containers. Qualifying and controlling cleaning methods 23.100

52543 2006 　 GOST R 52543-2006 Hydraulic drives. Safety requirements 13.110
23.100

52869 2007 ★ GOST R 52869-2007 Pneumatic drives. Safety requirements 13.100
23.100

ISO 10949 2007 ★ GOST ISO/TR 10949-2007 Industrial cleanliness. Guidelines for provision and controlling cleanliness of hydraulic fluid power components from manufacture to installation 23.100.60

ISO 16431 2007 ★ GOST ISO/TS 16431-2007 Industrial cleanliness. Verification of hydraulic fluid power systems cleanliness 23.100.60

23.120 換気装置．ファン．空調装置
注: 舶用ベンチレーション、空調、暖房→ 47.020.90
注: 鉱山用ベンチレーション、空調→ 73.100.20
注: 通気及び空気調和システム→ 91.140.30

Sort Mk 規格番号規格名称(英語) 国際規格分類
( ICSコードの説明 )

00002-780 1996 　 GOST 2.780-96 Unified system for design documentation. Graphic designations. Fluid conditioners and capacitors 01.080.30
23.120

00005-1644 1972 　 GOST 5.1644-72 Axial fans. Quality requirements for certified production 23.120

00005-2050 1973 　 GOST 5.2050-73 Aircompressor ТВ-80-1,6. Quality requirement of certified products 23.120

00012-02-028 1984 ★ GOST 12.2.028-84 [withdrawn? => GOST 31352-2007, GOST 31353.2,.3-2007]
Occupational safety standards system. Ventilators for general purposes. Methods for determination of noise characteristics 13.100
23.120

05976 1990 ★ GOST 5976-90 [withdrawn? =>GOST 31350-2007]
Radial fans for general use. General specifications 23.120

07402 1984 　 GOST 7402-84 Electric fans for domestic use. General specifications 23.120
97.030

09725 1982 　 GOST 9725-82 Gentrifugal forced draft fans for boilers. General specifications 27.060.30
23.120

10616 1990 　 GOST 10616-90 Radial and axial fans. Dimensions and parameters 23.120

10921 1990 　 GOST 10921-90 Radial and axial fans. Aerodynamic testing methods 23.120

11442 1990 ★ GOST 11442-90 [withdrawn? =>GOST 31350-2007]
General-purpose asxial fans. General specification 23.120

17083 1987 　 GOST 17083-87 Electric fan heaters for household use. General specifications 23.120
97.030

24751 1981 　 GOST 24751-81 Air handling equipment. Nominal dimensions of connections cross sections 23.120

25453 1989 　 GOST 25453-89 Pneumatic valves and air conditioners. Nominal diameters and connecting threads 23.100
23.120

26840 1986 　 GOST 26840-86 Ventilating electrical-and-hand units. Specifications 23.120
97.030

26963 1986 　 GOST 26963-86 Self-contained room air conditioners. General specifications 23.120
97.030

27330 1997 　 GOST 27330-97 Air heaters. Types and basic parameters 91.140.30
23.120

27925 1988 　 GOST 27925-88 Performances and construction of electric circulating fans and regulators 23.120
97.030

30434 1996 　 GOST 30434-96 Air conditioning and ventilating equipment. Rates and methods of vibration-survival and vibration-resistance control 17.160
23.120

30528 1997 　 GOST 30528-97 Ventilation systems. Air filters. Types and basic parameters 91.140.30
23.120

31350 2007 ★ GOST 31350-2007 Vibration. Industrial fans. Requirements for vibration levels and balance quality 21.120.40
23.120

31351 2007 ★ GOST 31351-2007 Vibration. Industrial fans. Measurement of vibration 17.160
23.120

51125 1998 　 GOST R 51125-98 Domestic air pollution control and conditioning equipment. Safety requirement and methods of testing 13.120
23.120
97.030
13.040.40

EN 00779 2007 ★ GOST R EN 779-2007 Particulate air filters for general ventilation. Determination of the filtration performance 23.120
73.100.20

IEC 60335-02-65 1996 　 GOST R IEC 335-2-65-96 Safety of household and similar electrical appliances. Particular requirements for air-cleaning appliances and test methods 13.120
23.120
97.030

23.140 圧縮機及び空気圧機械
注: 圧縮空気→ 71.100.20

Sort Mk 規格番号規格名称(英語) 国際規格分類
( ICSコードの説明 )

00004-119 1984 　 GOST 4.119-84 Product quality index system. Compressors (air and gas driven ones) and refrigerating plants of refrigerating capacity exceeding 2.9 Kw (2500 kcal/h). Nomenclature of basic indices 03.120
27.200
23.140

00004-423 1986 　 GOST 4.423-86 Product-quality index system. Compressional centrifugal machines. Index nomenclature 03.120
23.140

00012-02-016 1981 　 GOST 12.2.016-81 Occupational safety standards system. Gas compressing equipment. General safety requirements 13.100
23.140

00012-02-016-01 1991 　 GOST 12.2.016.1-91 Occurational safety standards system. Compressing equipment. Determination of noise characteristics. General requirments 17.140.20
23.140
13.140

00012-02-016-02 1991 　 GOST 12.2.016.2-91 Occupational safety standards system. CoMpression equipment. Noise characteristics determination method of stationary compressor sets 17.140.20
23.140
13.140

00012-02-016-03 1991 　 GOST 12.2.016.3-91 Occupational safety standards system. Compressing equipment. Determination method of noise characteristics of mobile compressor stations 17.140.20
23.140
13.140

00012-02-016-04 1991 　 GOST 12.2.016.4-91 Occupational safety standards system. Compressing equipment. Determination method of noise characteristics of stationary compressor stations and installations 17.140.20
23.140
13.140

00012-02-016-05 1991 　 GOST 12.2.016.5-91 Occupational safety standards system. Compressing equipment. Noise characteristics and antinoise protection. Lay-out ( composition, formulation, contents ) of technical documentation 17.140.20
23.140
13.140

00012-02-110 1985 　 GOST 12.2.110-85 Occupational safety standards systems. General-purpose stationary air piston compressors. Norms and methods for determination of noise characteristics 17.140.20
23.140
13.140

06492 1986 　 GOST 6492-86 Reciprocating one-step compressors of refrigerating capdeity more than 5,2 KW (4500 large calories/h). Types and basic parameters 27.200
23.140

09515 1981 　 GOST 9515-81 Piston metal rings for piston compressors. Specifications 23.140
23.160

10393 1994 　 GOST 10393-94 Piston compressors for railway rolling stock. General technical specifications 45.060.10
23.140

10393 1999 　 GOST 10393-99 Piston-type air compressors for raiway equipment.
General specifications 45.060.10
23.140

13529 1993 　 GOST 13529-93 Selfacting individual values of circular form for piston compressors. Types and fitting dimensions 23.140

17008 1985 　 GOST 17008-85 Khladon hermetic compressors. General specifications 27.200
23.140

18517 1984 　 GOST 18517-84 Garage compressors. General specifications 43.180
23.140

20073 1981 　 GOST 20073-81 General-purpose stationary air piston compressors. Acceptance rules and methods of tests 23.140

22502 1989 　 GOST 22502-89 Condensing units with hermetic refrigeration compressors for commercial refrigeration equipment. General specifications 27.200
23.140

23467 1979 　 GOST 23467-79 Air compressors for blast furnaces and air separation plants. General technical requirements 23.140

25005 1994 　 GOST 25005-94 Refrigerating equipment. General requirements for pressure determination 23.140
27.200

27407 1987 　 GOST 27407-87 Piston opposite compressors. Acceptable levels and methods of determination of noise characteristics 23.140
17.140.20

28547 1990 　 GOST 28547-90 Refrigerating compressors of positive displacement type. Methods of testing 23.140

28563 1990 　 GOST 28563-90 General-purpose mobile compressor station. Methods of testing 23.140

28567 1990 　 GOST 28567-90 Compressors. Terms and definitions 01.040.23
23.140

30419 1996 　 GOST 30419-96 Apparatus air bleeder brake equipment. General requirement safety 45.060
23.140

50333 1992 　 GOST R 50333-92 Selfacting individual values of circular form for piston compressors. Types and fitting dimensions 23.060
23.140

50700 1994 　 GOST R 50700-94 Positive displacement compressors with refrigerating capacity exceeding 3,0 kW on ozone safe refrigerants. Types and performance data 27.200
23.140

51360 1999 　 GOST R 51360-99 Refrigerating compressors. Safety requirements and methods of testing 27.200
23.140

IEC 60335-02-34 2000 　 GOST R IEC 60335-2-34-2000 Safety of household and similar electrical appliances. Particular requirements for motor-compressors and test methods 23.140
97.040.30

ISO 07919-03 1999 　 GOST R ISO 7919-3-99 Mechanical vibration of non-reciprocating machines. Measurements on rotating shafts and evaluation criteria. Coupled industrial machines 17.160
27.040
23.140

23.160 真空技術
注: 真空ポンプを含む。

Sort Mk 規格番号規格名称(英語) 国際規格分類
( ICSコードの説明 )

00002-796 1981 　 GOST 2.796-81 Unified system for design documentation. Graphic designations in schemes. Elements of vacuum systems 01.080.30
23.160

00002-796 1995 　 GOST 2.796-95 Unified system for design documentation. Graphic designations in schemes. Element of vacuum systems 01.080.30
23.160

00002-797 1981 　 GOST 2.797-81 Unified system for design documentation. Rules for presentation of vacuum schemes 01.100.01
23.160

00005-1150 1971 　 GOST 5.1150-71 High vacuum diffusion pumps type НВД. Quality requirements of certified products 23.160

00005-1807 1973 　 GOST 5.1807-73 Type-ГИН-0,5-1М getter-ion pump. Quality requirements of certified products 23.160

05197 1985 　 GOST 5197-85 Vacuum technology. Terms and definitions 01.040.23
23.160

09515 1981 　 GOST 9515-81 Piston metal rings for piston compressors. Specifications 23.140
23.160

14715 1988 　 GOST 14715-88 Vacuum valves. Types. Main charecteristics 23.160

18626 1973 　 GOST 18626-73 Bore diameters of components of vacuum systems. Basical dimensions 23.160

24934 1981 　 GOST 24934-81 Vacuum equipment. Fixed screw flanges. Basic and allied dimensions 23.160

24935 1981 　 GOST 24935-81 Vacuum equipment. Turning screw flanges. Basic and allied dimensions 23.160
23.040.60

25196 1982 　 GOST 25196-82 Vacuum equipment. Apparatus for ion implantation. General technical requirements 23.160

25197 1982 　 GOST 25197-82 Direct and angle vacuum valves. Mounting dimensions 23.160
23.060.10

25198 1982 　 GOST 25198-82 Vacuum equipment. Connections of vacuum pipe-lines. Mounting dimensions 23.160
23.040.60

25662 1983 　 GOST 25662-83 Vacuum equipment. Diffusion vacuum pumps. Basic parameters. Technical requirements. Test methods 23.160

25663 1983 　 GOST 25663-83 Vacuum equipment. Mechanical vacuum pumps. Testmethods 23.160

26099 1984 　 GOST 26099-84 Reciprocating vacuum pumps. Types and basic parameters 23.160

26526 1985 　 GOST 26526-85 Vacuum equipment. Flanger joint for highvacuum system. Design,dimensions and technical requirements 23.040.60
23.160

52715 2007 ★ GOST R 52715-2007 Vacuum equipment. Pipeline fittings. Mounting dimensions 23.040
23.160

52856 2007 ★ GOST R 52856-2007 Vacuum equipment. Flange dimensions 23.160

52912 2008 ★ GOST R 52912-2008 Nominal diameters of components of vacuum systems. Series 23.160

Sort Mk 規格番号規格名称(英語) 国際規格分類
( ICSコードの説明 )