標準関係情報集ロシア国家標準(GOST R規格)、旧ソ連邦標準(GOST規格)ICS(国際規格分類)コード順一覧(Part 21)

ロシア国家標準、旧ソ連邦標準
(GOST R, GOST規格) ＩＣＳ(国際規格分類)コード順一覧
大分類 21

21	一般用機械的システム及び構成要素
21.020	機械、装置、設備の特性及び設計注: 信頼性、確実性、保守性等を含む。注: 機械の安全→ 13.110
21.040	ねじ山注: 航空宇宙機用ねじ→ 49.030.10
21.060	締結用部品(ファスナ) 注: 外科用、生体代行用具、機能回復用具に関するファスナ→ 11.040.40 注: 航空宇宙機用ファスナ→ 49.030
21.080	蝶番、はとめ及びその他の連結ジョイント
21.100	軸受
21.120	軸及び継手
21.140	シール、パッキン注: パイプ及び継手に関するその他の規格→ 23.040.80
21.160	ばね注: ばね用鋼→ 77.140.25
21.180	軸受箱、エンクロージャ、その他の機械部品
21.200	歯車
21.220	フレキシブル駆動及び動力伝達
21.240	ロータリ往復動機構及びその部品注: ピストン、ピストンリング、クランクシャフト等の一般的規格を含む。
21.260	潤滑システム注: 潤滑剤→ 75.100

手持ちの情報を整理したものであり、規格原本による確認は行っていません。
すべてを網羅しているわけでも、正確さ、最新性を保証するものではありませんので、規格原本などで確認してください。
21.020 機械、装置、設備の特性及び設計
注: 信頼性、確実性、保守性等を含む。
注: 機械の安全→ 13.110

Sort Mk 規格番号規格名称(英語) 国際規格分類
( ICSコードの説明 )

00027-001 1981 　 GOST 27.001-81 System of standards "reliability in technique". General principles 03.120
21.020

00027-001 1995 　 GOST 27.001-95 System of standards for dependability in technics. Basic principles 21.020

00027-002 1989 　 GOST 27.002-89 Industrial product dependability. General principles. Terms and definitions 03.120.01
01.040.03
21.020
01.040.21

00027-003 1990 　 GOST 27.003-90 Dependability in technics. Dependability requirements: contents and general rules for specifing 03.120.01
21.020

00027-004 1985 　 GOST 27.004-85 Industrial product dependability. Technological systems. Terms and definitions 03.120.01
21.020
01.040.03
01.040.21

00027-202 1983 　 GOST 27.202-83 Reliability in technique. Technological systems. Methods of reliability evaluation by parameters of product quality 03.120.01
21.020

00027-203 　 GOST 27.203-83 Reliability in technique. Technological systems. General requirements for the methods of reliability estimation 03.120.01
21.020

00027-204 1983 　 GOST 27.204-83 Industrial product dependability. Technological systems. Technical requirements for methods of reliability evaluation on productivity parameters 03.120.01
21.020

00027-301 1995 　 GOST 27.301-95 Dependability in technics. Dependability prediction. Basic principles 21.020
03.120.01

00027-302 1986 　 GOST 27.302-86 Industrial product dependability. Evaluation methods of admissible state-deviation and prognosis of the residual machine components 03.120
21.020

00027-310 1995 　 GOST 27.310-95 Dependability in technics. Failure mode, effects and criticality analisys. Basic principles 21.020

00027-402 1995 　 GOST 27.402-95 Dependability in technics. Compliance test plans for mean time between failures (to failure). Part 1. Exponential case 21.020

00027-410 1987 　 GOST 27.410-87 Reliability in technique. Inspection methods of reliability indexes and plans of check tests on reliability 03.120.01
21.020

02689 1954 　 GOST 2689-54 Tolerances and fits of dimensions over 500 to 10000 mm 21.020
17.040.10

02904 1991 　 GOST 2904-91 Basic norms of interchangeability. Marks on the parts with the left thread 21.020

03047 1966 　 GOST 3047-66 Tolerances and fits in dimensions less than 1 mm 21.020
17.040.10

03111 1981 　 GOST 3111-81 Spherical plugs. Construction and dimensions 21.020

06636 1969 　 GOST 6636-69 Standard linear dimensions 17.040
21.020

07713 1962 　 GOST 7713-62 Limits and fits. Basic definitions 21.020
17.040.10

08593 1981 　 GOST 8593-81 Basic norms of interchangeabihty. Standart rates of taper and cone angles 17.040
21.020

08809 1971 　 GOST 8809-71 Limits and fits of dimension less than 0,1 min 21.020
17.040.10

08908 1981 　 GOST 8908-81 Basic norms of interchangeability. Standart angles and angle telerances 21.020

10948 　 GOST 10948-64 Radii of fillets and chamfers. Dimensions 21.020

11472 1969 　 GOST 11472-69 Limits and fits. Grades of tolerance 02-09 21.020
17.040.10

11710 1966 　 GOST 11710-66 Limits and fits for the parts of plastics 21.020
17.040.10

12969 1967 　 GOST 12969-67 Plates for machines and devices. Technical requirements 21.020

12970 1967 　 GOST 12970-67 Round plates for machines and devices. Dimensions 21.020

12971 1967 　 GOST 12971-67 Restangular plates for machines and devices. Dimensions 21.020

14140 1981 　 GOST 14140-81 Basic norms of interchangeability. Position tolerances of bore axes for fasteners 21.020

14775 　 GOST 14775-81 Slitting clearance grooves. Dimensions 21.020

15150 1969 　 GOST 15150-69 Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence 21.020

15151 1969 　 GOST 15151-69 Machines, instuments and other industrial products for tropics. General specification 21.020

17331 　 GOST 17331-71 [?] 03.120.01
21.020

21474 1975 　 GOST 21474-75 Straight and diamond knurl. Form and basic dimensions 21.020

24444 1987 　 GOST 24444-87 Processing equipment. General assembly and technological requirements 21.020

24643 1981 　 GOST 24643-81 Basic norms of interchangeability. Tolerances of form and position. Numerical values 21.020

25069 1981 　 GOST 25069-81 [withdrawn? => GOST 30893.2-2002]
Basic norms of interchangeability. Unindicated tolerances of form and surface location 21.020

25307 1982 　 GOST 25307-82 Basic norms of interchangeability. Cone joining system of limits and fits 21.020
17.040.10

25346 1989 　 GOST 25346-89 Basic norms of interchangeability. Unified system of tolerances and fits. General, series of tolerances and fundamental deviations 21.020
17.040.10

25347 1982 　 GOST 25347-82 Basic norms of interchangebility. Unified system of tolerances and fits. Tolerance zones and recommendable fits 21.020
17.040.10

25348 1982 　 GOST 25348-82 Basic norms of interchangebility. Unified system of tolerances and fits. Series of tolerances, basic deviations and tolerance zones for sizes over 3150 mm 21.020
17.040.10

25349 1988 　 GOST 25349-88 Basic norms of interchangeabiliti. Unified sistem of tolerances and fits. Tolerance zones for the plastics parts 21.020
17.040.10

25670 1983 　 GOST 25670-83 [withdrawn? => GOST 30893.1-2002]
Basic norms of interchangeability. Limit deviations of dimensions without tolerance indication 21.020
17.040.10

26179 1984 　 GOST 26179-84 Basic norms of interchangeability. Tolerances for sizes above 10000 up to 40000 mm 21.020
17.040.10

28187 1989 　 GOST 28187-89 Basic norms of interchangeability. Deviations of form and position. General requirements for methods of measurements 17.040
21.020

50056 1992 　 GOST R 50056-92 Basic norms of interchangeability. Depended tolerances of form, position and coordinating sizes. Bases of application 21.020
17.040.10

51909 2002 　 GOST R 51909-2002 Environment stability test methods for machines, instruments and other industrial products. Tests for transportation and storage 21.020
19.040

21.040 ねじ山
注: 航空宇宙機用ねじ→ 49.030.10

Sort Mk 規格番号規格名称(英語) 国際規格分類
( ICSコードの説明 )

04608 1981 　 GOST 4608-81 Basic norms of interchangeability. Metric screw thread. Interference fits 21.040.10

06042 1983 　 GOST 6042-83 Edison's round thread. Profiles, dimensions and dimension limits 21.040.10

06111 1952 　 GOST 6111-52 Conical pipe thread. Profile, basic dimensions and tolerances 21.040.20

06211 1981 　 GOST 6211-81 Conical pipe thread. Profile, basic dimensions and tolerances 21.040.30

06357 1981 　 GOST 6357-81 Pipe cylindrical thread. Profile, basic dimensions and tolerances 21.040.30

08724 1981 　 GOST 8724-81 Basic norms of interchangeability. Metric screw thread. Diameters and pitches 21.040.10

08724 2002 　 GOST 8724-2002 Basic norms of interchangeability. Metric screw threads. General plan 21.040.10

08762 1975 　 GOST 8762-75 Round threading diameter 40 mm for gas-mask with the gauges main dimensions and the tolerances 21.040
13.340.30

09000 1981 　 GOST 9000-81 Basic norms of interchangeability. Metric screw thread for diameters less than 1 mm. Tolerances 21.040.10

09150 1981 　 GOST 9150-81 Basic norms of interchangeability. Metric screw thread. Profile 21.040.10

09150 2002 　 GOST 9150-2002 Basic norms of interchangeability. Metric screw threads. Profile 21.040.10

09484 1981 　 GOST 9484-81 Single trapezoidal thread. Profile. Basic dimensions 21.040.10

09562 1981 　 GOST 9562-81 Basic norms of interchangeability. Trapezoidal single-start screw thread. Tolerances 21.040.10

09909 1981 　 GOST 9909-81 Bacis norms of interchangeability. Taper screw thread of valves and gas cylinder 21.040.30

10177 1982 　 GOST 10177-82 Buttress thread for diameters from 10 to 600 mm. Basic dimensions and tolerances 21.040.30

10549 1980 　 GOST 10549-80 Screw thread runout. Washout threads, total thread runouts, undercuts and chamfers 21.040

11709 1981 　 GOST 11709-81 Metric screw threads in the range 1-180 mm diameters for the parts in plastics. Profile, basic dimensions and tolerances 21.040.10

13535 1987 　 GOST 13535-87 Buttress thread, strengthend 45 for diameters from 80 to 2000 mm. Profile, basic dimensions, tolerances 21.040.30

13536 1968 　 GOST 13536-68 Round thread for sanitary fittings. Profile, basic dimensions, tolerances 21.040.30

16093 1981 　 GOST 16093-81 [withdrawn => GOST 16093-2004]
Basic norms of interchangebility. Metric screw thread. Tolerances. Clearance fits 21.040.10

16093 2004 　 GOST 16093-2004 Вasic norms of interchangeability. Metric screw thread. Tolerances. Clearance fits 21.040.10

16967 1981 　 GOST 16967-81 Basic norms of interchangeability. Metric thread for instrument-making industry. Diameters and pitches 21.040.10

19257 1973 　 GOST 19257-73 Holes for threading metric thread. Diameters 21.040.10

21348 1975 　 GOST 21348-75 Holes for threading pipe cylindrical thread. Diameters 21.040.30

21350 1975 　 GOST 21350-75 Holes for threading pipe taper screw thread. Diameters 21.040.30

24705 1981 　 GOST 24705-81 [withdrawn => GOST 24705-2004]
Basic norms of interchangeability. Metric threadbasic dimensions 21.040.10

24705 2004 　 GOST 24705-2004 Вasic norms of interchangeability. Metric screw thread. Basic dimensions 21.040.10

24706 1981 　 GOST 24706-81 Basic norms of interchangeability. Metric thread for instrumentmaking industry. Basic dimensions 21.040.10

24737 1981 　 GOST 24737-81 Basic norms of interchangeability. Trapezoidal single-start screw thread. Basic dimensions 21.040.10

24738 1981 　 GOST 24738-81 Basic norms of interchangeability. Trapezoidal single-start screw thread. Diameters and pitches 21.040.10

24739 1981 　 GOST 24739-81 Basic norms of interchangeability. Trapezoidal multistart screw thread 21.040.10

24834 1981 　 GOST 24834-81 Basic norms of interchangeability. Metric screw thread. Transition fits 21.040.10

24997 2004 　 GOST 24997-2004 Gauges for metric thread. Tolerances 21.040.10

25096 1982 　 GOST 25096-82 Basic norms of interchangeability. Butters thread. Tolerances 21.040.30

25229 1982 　 GOST 25229-82 Basic norms of interchangeability. Metric taper screw thread 21.040.10

28487 1990 　 GOST 28487-90 Tool-joint tapered thread for drill string elements. Profile. Dimensions. Tolerances 21.040

30892 2002 　 GOST 30892-2002 Basic norms of interchangeability. Metrical MJ theads. Profile, general plan, tolerances 21.040.10

31254 2004 　 GOST 31254-2004 Вasic norms of interchangeability. Geometrical features. General terms and definitions 21.040.10

50864 1996 　 GOST R 50864-96 Tool-joint tapered thread for drill string elements. Profile,dimensions, technical requirements 21.040.30

ISO 01478 1993 　 GOST R ISO 1478-93 Tapping screws thread 21.040

21.060 締結用部品(ファスナ)
注: 外科用、生体代行用具、機能回復用具に関するファスナ→ 11.040.40
注: 航空宇宙機用ファスナ→ 49.030

Sort Mk 規格番号規格名称(英語) 国際規格分類
( ICSコードの説明 )

00397 1979 　 GOST 397-79 Splints. Technical conditions 21.060.30

01144 1980 　 GOST 1144-80 Half-round head wood screws. Construction and dimensions 21.060.99

01145 1980 　 GOST 1145-80 Countersunk head wood screws. Construction and dimensions 21.060.99

01146 1980 　 GOST 1146-80 Raised coutersunk head wood screws. Construction and dimensions 21.060.99

01147 1980 　 GOST 1147-80 Wood screws. General specifications 21.060.99

01476 1993 　 GOST 1476-93 Cone-point straight slatted set screws. Product grades A and B. Specifications 21.060.10

01477 1993 　 GOST 1477-93 Flat-point straight slotted set screws. Product grades A and B. Specifications 21.060.10

01478 1993 　 GOST 1478-93 Dog-point straight slotted set screws. Product grades A and B. Specifications 21.060.10

01479 1993 　 GOST 1479-93 Cup-point straight slotted set screws. Product grades A and B. Specifications 21.060.10

01481 1984 　 GOST 1481-84 Hexagon-head dog-point set screws. Product grades a and b. Construction and dimensions 21.060.10

01482 1984 　 GOST 1482-84 Square-head dog-point set screws. Product grades a and b. Construction and dimensions 21.060.10

01483 1984 　 GOST 1483-84 Hexagon-head step-point with cone set screws. Product grades a and b. Construction and dimensions 21.060.10

01485 1984 　 GOST 1485-84 Square-head cup-point set screws. Product grades a and b. Construction and dimensions 21.060.10

01486 1984 　 GOST 1486-84 Square-head step-point with sphere set screws. Product grades a and b. Construction and dimensions 21.060.10

01488 1984 　 GOST 1488-84 Square-head collar set screws. Product grades a and b. Construction and dimensions 21.060.10

01491 1980 　 GOST 1491-80 Cheese-head screws. Product grades a and b. Construction and dimensions 21.060.10

01759-00 1987 　 GOST 1759.0-87 Bolts,screws,studs and nuts. Specifications 21.060.10

01759-01 1982 　 GOST 1759.1-82 Bolts, screws, studs and tuts. Tolerances. Control methods of dimensions and deviations of form and surface position 21.060.01

01759-02 1982 　 GOST 1759.2-82 Bolts, screws and studs. Surface defects and methods of control 21.060.10

01759-03 1983 　 GOST 1759.3-83 Nuts. Surface defects and methods of control 21.060.20

01759-04 1987 　 GOST 1759.4-87 Bolts, screws and studs mechanical properties and test methods 21.060.10

01759-05 1987 　 GOST 1759.5-87 Nuts. Mechanical properties and test methods 21.060.20

02524 1970 　 GOST 2524-70 Hexagon nuts with reduced width across flats (high precision). Constructions and dimensions 21.060.20

02526 1970 　 GOST 2526-70 Haxagon lock-nuts with reduced width across flats, product grade А. Construction and dimensions 21.060.20

02528 1973 　 GOST 2528-73 Hexagon slotted nuts with reduced width across flats, accuracy class. Construction and dimensions 21.060.20

02832 1977 　 GOST 2832-77 Adjusting rings with screw fastening. Dimensions 21.060.60

02833 1977 　 GOST 2833-77 Spring rings for screw stoppering and grooves for them. Construction and dimensions 21.060.60

02893 1982 　 GOST 2893-82 Rolling bearings. Grooves for locking spring rings. Locking shap rings. Dimensions 21.100.20
21.060.60

03032 1976 　 GOST 3032-76 Fly nuts. Construction and dimensions 21.060.20

03033 1979 　 GOST 3033-79 Eye bolts design and dimensions 21.060.10

03128 1970 　 GOST 3128-70 Cylindrical pins unhardened. Construction and dimensions 21.060.50

03129 1970 　 GOST 3129-70 Taper pins. Construction and dimensions 21.060.50

03130 1977 　 GOST 3130-77 Adjusting rings witch pin fastening. Construction and dimensions 21.060.60

03385 1969 　 GOST 3385-69 Wing nuts. Desing 21.060.20

04087 1969 　 GOST 4087-69 Quick-detachable washers. Design 21.060.30

04088 1969 　 GOST 4088-69 Fashioned nuts. Design 21.060.20

04090 1969 　 GOST 4090-69 Suspended washers. Design 21.060.30

05915 1970 　 GOST 5915-70 Hexagon nuts, product grade B. Construction and dimensions 21.060.20

05916 1970 　 GOST 5916-70 Hexagon lock nuts (standard precision). Construction and dimensions 21.060.20

05918 1973 　 GOST 5918-73 Hexagon slotted and castle nuts, accuracy class B. Construction and dimensions 21.060.20

05919 1973 　 GOST 5919-73 Hexagon thin slotted and castle nuts, accuracy class B. Construction and dimensions 21.060.20

05927 1970 　 GOST 5927-70 Hexagon nuts (high precision). Construction and dimensions 21.060.20

05929 1970 　 GOST 5929-70 Hexagon lock nuts (high precision). Construction and dimensions 21.060.20

05931 1970 　 GOST 5931-70 Hexagon domed nuts (high precision). Construction and dimensions 21.060.20

05932 1973 　 GOST 5932-73 Hexagon slotted and castle nuts accuracy class A. Construction and dimensions 21.060.20

05933 1973 　 GOST 5933-73 Hexagon thin slotted and castle nuts, accuracy class A. Construction and dimensions 21.060.20

05935 1973 　 GOST 5935-73 Hexagon thin slotted nuts with reduced width across flats, accuracy class A. Construction and dimensions 21.060.20

06393 1973 　 GOST 6393-73 Ronud nuts with set pin holes in side. Design and sizes 21.060.20

06402 1970 　 GOST 6402-70 Lock washers. Specifications 21.060.30

06958 1978 　 GOST 6958-78 Enlarged washers. Technical conditions 21.060.30

07783 1981 　 GOST 7783-81 Cup nibbed head bolts product grade C. Construction and dimensions 21.060.10

07785 1981 　 GOST 7785-81 Countersunk nibbed head bolts, product grade C. Construction and dimensions 21.060.10

07786 1981 　 GOST 7786-81 Countersunk square shoulder bolts, product grade C. Construction and dimensions 21.060.10

07787 1981 　 GOST 7787-81 Deep countersunk head bolts, product grade C. Construction and dimensions 21.060.10

07795 1970 　 GOST 7795-70 Hexagon reduced bead bolts with guide neck product grade B. Construction and dimensions 21.060.10

07796 1970 　 GOST 7796-70 Hexagon reduced head bolts product grade B. Construction and dimensions 21.060.10

07798 1970 　 GOST 7798-70 Hexagon bolts, product grade B. Construction and dimensions 21.060.10

07801 1981 　 GOST 7801-81 Increased cup nibbed head bolts, product grade C. Construction and dimensions 21.060.10

07802 1981 　 GOST 7802-81 Increased cup head square shoulder bolts product grade C. Constructions and dimensions 21.060.10

07805 1970 　 GOST 7805-70 Hexagon bolts, product grade A. Construction and dimensions 21.060.10

07808 1970 　 GOST 7808-70 Hexagon bolts with reduced head, product grade A. Construction and dimensions 21.060.10

07811 1970 　 GOST 7811-70 Hexagon reduced head bolts with guide neck, product grade A. Construction and dimensions 21.060.10

07817 1980 　 GOST 7817-80 Product grade A fit bolts with hexagon reduced head. Construction and dimensions 21.060.10

08381 1973 　 GOST 8381-73 Round mets with radially spaced hobs. Design and sizes 21.060.20

08530 1990 　 GOST 8530-90 Rolling bearings. Locknuts, washers and cramps for tapered adaptive and withdrawal sleeves. Specifications 21.100.20
21.060

08878 1993 　 GOST 8878-93 Hexagonal socket cone-point set screws. Product grades A and B. Specifications 21.060.10

09064 1975 　 GOST 9064-75 Nuts for flauged connection with medium temperature 0 to 650 degrees c. Types and general sizes 23.040.60
21.060.20

09066 1975 　 GOST 9066-75 Stude for flanged connections with medium temperature 0 to 650 degrees c. Types and general sizes 23.040.60
21.060.10

09464 1979 　 GOST 9464-79 Taper pins with internal thread. Construction and dimensions 21.060.50

09465 1979 　 GOST 9465-79 Taper pins with threaded stem. Construction and dimensions 21.060.50

09649 1978 　 GOST 9649-78 Washers for pins. Technical conditions 21.060.30

10299 1980 　 GOST 10299-80 Round head rivets classes B and C. Specifications 21.060.40

10300 1980 　 GOST 10300-80 Countersunk head rivets classes B and C. Specifications 21.060.40

10301 1980 　 GOST 10301-80 Raised countersunk head rivets classes B and C. Specifications 21.060.40

10302 1980 　 GOST 10302-80 Brazier-head rivets classes B and C. Specifications 21.060.40

10303 1980 　 GOST 10303-80 Flat head rivets classes B and C. Specifications 21.060.40

10304 1980 　 GOST 10304-80 Rivets classes B and C. General specifications 21.060.40

10336 1980 　 GOST 10336-80 Cheese-head non-falling-out screws, product grade B. Construction and dimensions 21.060.10

10337 1980 　 GOST 10337-80 Raised cheese-head non-falling-out screws, product grade B. Construction and dimensions 21.060.10

10338 1980 　 GOST 10338-80 Hexagon-head non-falling-out screws, product grade B. Construction and dimensions 21.060.10

10339 1980 　 GOST 10339-80 Countersunk non-falling-out screws, product grade B. Construction and dimensions 21.060.10

10340 1980 　 GOST 10340-80 Raised countersunk head non-falling-out screws, product grade B. Construction and dimensions 21.060.10

10341 1980 　 GOST 10341-80 Mushroom-head non-falling-out screws, product grade B. Construction and dimensions 21.060.10

10342 1980 　 GOST 10342-80 Cheese-head non-falling-out screws with hexagon socket for 'width across flats', product grade B. Construction and dimensions 21.060.10

10343 1980 　 GOST 10343-80 Non-falling-out screws with flat for 'width across flats', product grade B. Construction and dimensions 21.060.10

10344 1980 　 GOST 10344-80 Knurled-head non-falling-out screws, product grade B. Construction and dimensions 21.060.10

10450 1978 　 GOST 10450-78 Diminished washers. Technical conditions 21.060.30

10461 1981 　 GOST 10461-81 Shake-proof washers with leeth. Technical requirements 21.060.30

10462 1981 　 GOST 10462-81 Shake-proof washers with inside teeth. Dimensions 21.060.30

10463 1981 　 GOST 10463-81 Shake-proof washers with outerside teeth. Dimensions 21.060.30

10464 1981 　 GOST 10464-81 Shake-proof washers with teeth for screws having countersunk and raised countersunk head of 90 celsium angle. Dimensions 21.060.30

10602 1972 　 GOST 10602-72 Hexagon-head bolts with thread diameter over 48 mm (standard precisin). Design and dimensions 21.060.10

10602 1994 　 GOST 10602-94 Hexagon - head bolts with thread diameter over 48 mm. Product grade B. Specifications 21.060.10

10605 1972 　 GOST 10605-72 [withdrawn]
Hexagon nuts with thread diameter over 48 mm (standard precision). Design and dimensions 21.060.20

10605 1994 　 GOST 10605-94 Hexagon nuts with thread diameter over 48 mm. Product grade B. Spesifications 21.060.20

10606 1972 　 GOST 10606-72 Hexagon castle nuts with thread diameter over 48 mm producn grade B. Design and dimensions 21.060.20

10607 1972 　 GOST 10607-72 Hexagon lock nuts with thread diameter over 48 mm (standard precision). Design and dimensions 21.060.20

10607 1994 　 GOST 10607-94 Hexagon lock nuts thread diameter over 48 mm. Product grade B. Spesifications 21.060.20

10608 1972 　 GOST 10608-72 Hexagon nuts with reduced width across flat with thread diameter over 48 mm product grade A. Design and dimensions 21.060.20

10609 1972 　 GOST 10609-72 Hexagon castle nuts with reduced width across flat with thread diameter over 48 mm product grade A. Design and dimensions 21.060.20

10610 1972 　 GOST 10610-72 Hexagon lock nuts with reduced width across flat with thread diameter over 48 mm product grade A. Design and dimensions 21.060.20

10618 1980 　 GOST 10618-80 Thread forming screws for metals and plastics. General specifications 21.060.10

10619 1980 　 GOST 10619-80 Thread formeng screws with countersunk head for metals and plasties. Construction and dimensions 21.060.10

10620 1980 　 GOST 10620-80 Thread formeng screws with raised covntersunk head for metals and pastics. Construction and dimensions 21.060.10

10621 1980 　 GOST 10621-80 Thread forming screws with round head for metals and plastics. Construstion and dimensions 21.060.10

10657 1980 　 GOST 10657-80 Round nuts slotted on face. Specifications 21.060.20

10753 1986 　 GOST 10753-86 Cross recesses for screws and wood screws. Dimensions and control methods 21.060.10

10773 1993 　 GOST 10773-93 Grooved pins-full-length taper grooved. Specifications 21.060.50

10774 1980 　 GOST 10774-80 Cylindrical pins with drilled ends. Specifications 21.060.50

10906 1978 　 GOST 10906-78 Square taper washers. Specifictions 21.060.30

11074 1993 　 GOST 11074-93 Hexagonal socket flat-point set screws. Product grades A and B. Specifications 21.060.10

11075 1993 　 GOST 11075-93 Hexagonal socket dog-point set screws. Product grades A and B. Specifications 21.060.10

11284 1975 　 GOST 11284-75 Through holes for fasteners. Dimensions 21.060.01

11371 1978 　 GOST 11371-78 Washers. Specifications 21.060.30

11473 1975 　 GOST 11473-75 Hexagon head wood screws. Construction and dimensions 21.060.10

11644 1975 　 GOST 11644-75 Rounded-off pan-head screw, product grades A and B. Design and dimensions 21.060.10

11648 1975 　 GOST 11648-75 Quick removable thrust washers. Specifications 21.060.30

11650 1980 　 GOST 11650-80 Self-tappeng round-head and sharpening end screws for metals and plastics. Construction and dimensions 21.060.10

11651 1980 　 GOST 11651-80 Self-tapping raised countersunk head and sharpening end screws for metals and plastics. Construstion and dimensions 21.060.10

11652 1980 　 GOST 11652-80 Self-tapping countersunk head and sharfening endscrews for metals and plastics. Construction and dimensions 21.060.10

11738 1984 　 GOST 11738-84 Hexagon socket head cap screws, accuracy class A. Construction and dimensions 21.060.10

11860 1985 　 GOST 11860-85 Blind nuts, product grade A. Construction and dimensions 21.060.20

11871 1988 　 GOST 11871-88 Slotted round nuts product grade a. Technical reguirements 21.060.20

11872 1989 　 GOST 11872-89 Tongued lock washers. Specifications 21.060.30

12207 1979 　 GOST 12207-79 Cylindric pins with internal thread. Specifications 21.060.50

12414 1966 　 GOST 12414-66 [withdrawn]
Ends of bolts, screws and studs. Sizes 21.060.10

12414 1994 　 GOST 12414-94 Ends of bolts, screws and studs. Sizes 21.060.10

12415 1980 　 GOST 12415-80 Holes for check-screws. Types and dimensions 21.060.10

12458 1967 　 GOST 12458-67 Screws with bead. Design 21.060.10
25.060.99

12459 1967 　 GOST 12459-67 Strenghthening bolts for machined slots. Design 21.060.10
25.060.99

12460 1967 　 GOST 12460-67 Nuts with lock screws. Design 21.060.20
25.060.99

12461 1967 　 GOST 12461-67 Nuts hexagonal high with acme thread. Design 21.060.20
25.060.99

12462 1967 　 GOST 12462-67 Nuts hexagonal with bead and acme thread. Design 21.060.20
25.060.99

12638 1980 　 GOST 12638-80 Hollow edge-rounded-head rivets. Specifications 21.060.40

12639 1980 　 GOST 12639-80 Hollow flat-head rivets. Specifications 21.060.40

12640 1980 　 GOST 12640-80 Hollow countersunk-(flat)-head rivets. Specifications 21.060.40

12641 1980 　 GOST 12641-80 Semi-hollow button-head rivets. Specifications 21.060.40

12642 1980 　 GOST 12642-80 Semi-hollow flat-head rivets. Specifications 21.060.40

12643 1980 　 GOST 12643-80 Semi-hollow countersunk-(flat)-head rivets. Specications 21.060.40

12644 1980 　 GOST 12644-80 Hollow and semi-hollow rivets. Specifications 21.060.40

12850 1980 　 GOST 12850-80 Cylindrical notched pins with engaged ends. Sitzes and technical requirements 21.060.50

12850-01 1993 　 GOST 12850.1-93 Grooved pins-full-length parallel grooved with pilot. Specifications 21.060.50

12850-02 1993 　 GOST 12850.2-93 Grooved pins-full-length parallel grooved, with chamfer. Specifications 21.060.50

12876 1967 　 GOST 12876-67 Bearing surface under fasteners. Dimensions 21.060.01

13463 1977 　 GOST 13463-77 Tab lock washers. Design and dimensions 21.060.30

13464 1977 　 GOST 13464-77 Decreased tab lock washers. Design and dimensions 21.060.30

13465 1977 　 GOST 13465-77 Lock washers with nose. Design and dimensions 21.060.30

13466 1977 　 GOST 13466-77 Decreased lock washers with nose. Design and dimensions 21.060.30

14034 1974 　 GOST 14034-74 Centre holes. Dimensions 21.060.01

14229 1993 　 GOST 14229-93 Spring type straight pins, slotted. Specifications 21.060.50

14797 1985 　 GOST 14797-85 Button-head rivets (high precision). Construction and dimensions 21.060.40

14798 1985 　 GOST 14798-85 90 Countersunk-head rivets (high precision). Construction and dimensions 21.060.40

14799 1985 　 GOST 14799-85 120 Countersunk-head rivets (hign precision). Construction and dimensions 21.060.40

14800 1985 　 GOST 14800-85 Flat-protruding head rivets (high precision). Construction and dimensions 21.060.40

14801 1985 　 GOST 14801-85 Flat-head rivets (high precision). Construction and dimensions 21.060.40

14802 1985 　 GOST 14802-85 Rivets (high precision). Hole diameters for rivets, urset head dimensions and length selection 21.060.40

14803 1985 　 GOST 14803-85 Rivets (high precision). General specifications 21.060.40

15163 1978 　 GOST 15163-78 Tapered bolts high precision. Technical conditions 21.060.10

15521 1970 　 GOST 15521-70 Hexagon nuts with reduced width across flats, product grade B. Construction and dimensions 21.060.20

15522 1970 　 GOST 15522-70 Hexagon lock-nuts with reduced width across flats, product grade B. Construction and dimensions 21.060.20

15523 1970 　 GOST 15523-70 Hexagon thick nuts product grade B. Construction and dimensions 21.060.20

15524 1970 　 GOST 15524-70 Hexagon thick nuts product grade A. Construction and dimensions 21.060.20

15525 1970 　 GOST 15525-70 Hexagon thick nuts product grade B. Construction and dimensions 21.060.20

15526 1970 　 GOST 15526-70 Hexagon nuts, product grade C. Construction and dimensions 21.060.20

15589 1970 　 GOST 15589-70 Hexagon bolts product grade C. Construction and dimensions 21.060.10

15590 1970 　 GOST 15590-70 Hexagon reduced head bolts with guide neck product grade C. Construction and dimensions 21.060.10

15591 1970 　 GOST 15591-70 Hexagon reduced head bolts, product grade C. Construction and dimensions 21.060.10

15973 2005 　 GOST R ISO 15973-2005 Closed end blind rivets with break pull mandrel and protruding head (aluminium alloy body and stecl mandrel) 21.060.40

15974 2005 　 GOST R ISO 15974-2005 Closed end blind rivets with break pull mandrel and countersunk head (aluminium alloy body and steel mandrel) 21.060.40

16030 1970 　 GOST 16030-70 Sqare and oblong through holes for fasteners. Shape and dimensions 21.060.01

17473 1980 　 GOST 17473-80 Half-rounded head screws product grades A and B. Construction and dimensions 21.060.10

17474 1980 　 GOST 17474-80 Raised countersunk head screws product grades A and B. Construction and dimensions 21.060.10

17475 1980 　 GOST 17475-80 Countersunk head screws product A and B. Construction and dimensions 21.060.10

17673 1981 　 GOST 17673-81 Increased countersunk square shoulder bolts, product grade C. Construction and dimensions 21.060.10

17678 1980 　 GOST 17678-80 Light cramps for pipe-line and cable fixing. Design and dimensions 21.060.70

17679 1980 　 GOST 17679-80 Light yokes for pipe-line and cable fixing. Design and dimensions 21.060.60

17680 1980 　 GOST 17680-80 Light links for cable fixing. Design and dimensions 21.060.99

17769 1983 　 GOST 17769-83 Fastening details. Rules of acceptance 21.060.01

18123 1982 　 GOST 18123-82 Washers. General specifications 21.060.30

18125 1972 　 GOST 18125-72 Hexagon reduced head bolts with thread diameter over 48 mm. Product grades A and B. Design and dimensions 21.060.10

18126 1972 　 GOST 18126-72 [withdrawn]
Bolts, studs and nuts with thread diameter over 48 mm. Technical requirements 21.060.10
21.060.20

18126 1994 　 GOST 18126-94 Bolts and nuts with thread diameter over 48 mm. General specifications 21.060.10

18160 1972 　 GOST 18160-72 Fasteners. Packing. Marking. Transportation and storage 21.060.01

18786 1980 　 GOST 18786-80 Female shouldered screws. Design and dimensions 25.120.10
21.060.10

18787 1980 　 GOST 18787-80 Splined stepped screws. Design and dimensions 25.120.10
21.060.10

18788 1980 　 GOST 18788-80 Extensions for shouldered screws. Design and dimensions 25.120.10
21.060.10

18789 1980 　 GOST 18789-80 Limiting sleeves. Design and dimensions 25.120.10
21.060.10

18792 1980 　 GOST 18792-80 Locking washers for ejector limit switches. Design and dimensions 25.120.10
21.060.30

18796 1980 　 GOST 18796-80 Nuts for spring packs. Design and dimensions 25.120.10
21.060.20

18797 1980 　 GOST 18797-80 Guided nuts for spring packs. Design and dimensions 25.120.10
21.060.20

18801 1980 　 GOST 18801-80 Nuts for packs of disc springs. Design and dimensions 25.120.10
21.060.20

19119 1980 　 GOST 19119-80 Taper axially splitted pins. Specifications 21.060.50

20130 1974 　 GOST 20130-74 Screws for pattern plates. Design and dimensions 25.120.30
21.060.10

20700 1975 　 GOST 20700-75 Bolts, studs, nuts and washers for flanged and anchor connections, corks and yokes with medium temperature from 0 to 650 C. Specifications 21.060
23.040

20720 1993 　 GOST 20720-93 Double-slider couplings. Parameters and dimensions 21.120.20
21.060.60

20742 1993 　 GOST 20742-93 Chain couplings. Parameters and dimensions 21.120.20
21.060.60

21082 1975 　 GOST 21082-75 Metal casting patterns. Securing of built-up patterns. Design and dimensions 21.060
25.120.30

21083 1975 　 GOST 21083-75 Metal casting patterns. Securing of pattern pieces. Design and dimensions 21.060
25.120.30

21249 1996 　 GOST 21249-96 Blunt bolts for general purpose. Basic parameters and dimensions 21.060.10
21.060.99

21331 1975 　 GOST 21331-75 High knurled-head screws. Construction and dimensions 21.060.10

21332 1975 　 GOST 21332-75 Low knurled-head screws. Construction and dimensions 21.060.10

21333 1975 　 GOST 21333-75 Low knurled-head and cone-point screws. Construction and dimensions 21.060.10

21334 1975 　 GOST 21334-75 Low knurled-head and step-point screws. Construction and dimensions 21.060.10

21335 1975 　 GOST 21335-75 Low knurled-head and cup-point screws. Construction and dimensions 21.060.10

21336 1975 　 GOST 21336-75 Low knurled-head and round-point screws. Construction and dimensions 21.060.10

21337 1975 　 GOST 21337-75 Low knurled-head and flat-dog point screws. Construction and dimensions 21.060.10

21338 1975 　 GOST 21338-75 Knurled-head screws. Technical requirements 21.060.10

21424 1993 　 GOST 21424-93 Flexible couplings with rubber-bushed studs. Parameters and dimensions 21.060.60

22032 1976 　 GOST 22032-76 Studs with threaded end of 1d. Product grade B. Construction and dimensions 21.060.10

22033 1976 　 GOST 22033-76 Studs with threaded end of 1d. Product grade A. Construction and dimensions 21.060.10

22034 1976 　 GOST 22034-76 Studs with threaded end of 1,25d. Product grade B. Construction and dimensions 21.060.10

22035 1976 　 GOST 22035-76 Studs with threaded end of 1,25d. Product grade A. Construction and dimensions 21.060.10

22036 1976 　 GOST 22036-76 Studs with threaded end of 1,6d. Product grade B. Construction and dimensions 21.060.10

22037 1976 　 GOST 22037-76 Studs with threaded end of 1,6d. Product grade A. Construction and dimensions 21.060.10

22038 1976 　 GOST 22038-76 Studs with threaded end of 2d. Product grade B. Construction and dimensions 21.060.10

22039 1976 　 GOST 22039-76 Studs with threaded end of 2d. Product grade A. Construction and dimensions 21.060.10

22040 1976 　 GOST 22040-76 Studs with threaded end of 1,2d. Product grade B. Construction and dimensions 21.060.10

22041 1976 　 GOST 22041-76 Studs with threaded end of 2,5d. Product grade A. Construction and dimensions 21.060.10

22042 1976 　 GOST 22042-76 Studs for smooth hole parts. Product grade B. Construction and dimensions 21.060.10

22043 1976 　 GOST 22043-76 Studs for smooth hole parts. Product grade A. Construction and dimensions 21.060.10

22194 1983 　 GOST 22194-83 Buffer upper washers for sheet stamping dies. Design and dimensions 25.120.10
21.060.30

22195 1983 　 GOST 22195-83 Buffer lower washers for sheet stamping dies. Design and dimensions 25.120.10
21.060.30

22353 1977 　 GOST 22353-77 High strength bolts of product grade B. Construction and dimensions 21.060.10

22354 1977 　 GOST 22354-77 High strength nuts of product grade B. Construction and dimensions 21.060.20

22355 1977 　 GOST 22355-77 Product grade C washers for high-strength bolts. Construction and dimensions 21.060.30

22356 1977 　 GOST 22356-77 High strength bolts and nuts and washers. General specifications 21.060.10

22742 1977 　 GOST 22742-77 Sets of square connectors fixture of radioelectronic items. Specifications 21.060.01
31.220

23304 1978 　 GOST 23304-78 Studs, nuts and washers for flanged connections for atomic power plants. Technical requirements acceptance rules. Test methods. Marking, packing, transportation and storage 21.060
27.120.20

24132 1980 　 GOST 24132-80 Fastening parts for piping. Cramps. Design. Dimensions 21.060.70

24133 1980 　 GOST 24133-80 Fastening parts for piping. Single-seat cramps. Design. Dimensions 21.060.70

24134 1980 　 GOST 24134-80 Fastening parts for piping. Double-seat cramps. Design. Dimensions 21.060.70

24135 1980 　 GOST 24135-80 Fastening parts for piping. Tree-seat cramps. Design. Dimensions 21.060.70

24136 1980 　 GOST 24136-80 Fastening parts for piping. Four-seat cramps. Design. Dimensions 21.060.70

24137 1980 　 GOST 24137-80 Fastening parts for piping joints. Design and dimensions 21.060.60

24138 1980 　 GOST 24138-80 Fastening parts for piping gokes welded. Design dimensions 21.060.60

24139 1980 　 GOST 24139-80 Fastening parts for piping single-sided yokes. Design. Dimensions 21.060.60

24140 1980 　 GOST 24140-80 Fastening parts for piping. Cramps and yokes. Qnality specifications 21.060.70
21.060.60

24196 1980 　 GOST 24196-80 Crampons for bronze taps. Design and basic dimensions 21.060.70

24197 1980 　 GOST 24197-80 Square washers. Design and basic dimensions 21.060.30

24198 1980 　 GOST 24198-80 Brackets. Design and basic dimensions 21.060.99

24199 1980 　 GOST 24199-80 Regulated brackets. Design and basic dimensions 21.060.99

24296 1993 　 GOST 24296-93 Hardened cylindrical pins. Specifications 21.060.50

24379-00 1980 　 GOST 24379.0-80 Foundation bolts. General specification 21.060.10

24379-01 1980 　 GOST 24379.1-80 Foundation bolts. Structure and dimensions 21.060.10

24669 1981 　 GOST 24669-81 Slots for screws and wood screws. Dimensions 21.060.10

24670 1981 　 GOST 24670-81 Bolts, screws and wood screws. Radiws under the head 21.060.10

24671 1984 　 GOST 24671-84 Hexagon-head bolts, screws, wood screws and hexagon nuts, width across flats 21.060.10

25021 1993 　 GOST 25021-93 Disk flexible couplings. Parameters and dimensions 21.060.60

25556 1982 　 GOST 25556-82 Set screws. Mechanical properties and test methods 21.060.10

26805 1986 　 GOST 26805-86 Tubular rivet for one-sided 21.060.40

26862 　 GOST 26862-86 Rins. General specifications 21.060.50

27017 1986 　 GOST 27017-86 Fasteners. Terms and definitions 01.040.21
21.060.01

27148 1986 　 GOST 27148-86 Fasteners. Screrw thead runout. Washout threads, total thread runouts and indurcuts 21.060.01

27320 1987 　 GOST 27320-87 Expansive bolts. Construction 21.060.99

28456 1990 　 GOST 28456-90 Expansive dowels for building. General specifications 21.060.99

28457 1990 　 GOST 28457-90 Expansive dowels for building. Construction 21.060.99

28778 1990 　 GOST 28778-90 Expansion bolt self-anchoring for building. Specifications 21.060.10

28848 1990 　 GOST 28848-90 Plain washers. Extra large series. Product grade C 21.060.30

28961 1991 　 GOST 28961-91 Plain washers for metric bolts, screws and nuts. General plane 21.060.30

28962 1991 　 GOST 28962-91 Hexagon socket head shoulder screws. Specification 21.060.10

28963 1991 　 GOST 28963-91 Hexagon socket button head screws. Metric series. Specifications 21.060.10

28964 1991 　 GOST 28964-91 Hexagon socket set screws with cutpoint. Specifications 21.060.10

29293 1992 　 GOST 29293-92 Earth-moving machinery. Plough bolt heads. Shapes and dimensions (excluding thread dimensions) 21.060.10

30322 1995 　 GOST 30322-95 Pins and grooved pins. Shear test 21.060.50

50076 1992 　 GOST R 50076-92 Pins and grooved pins. Shear test 21.060.50

50141 1992 　 GOST R 50141-92 Joints by insrted dowels for wooden split patterns and core boxes. Design 21.060.10
25.120.30

50142 1992 　 GOST R 50142-92 Joints by flange dowels for wooden split patterns and core boxes. Design 21.060.10
25.120.30

50143 1992 　 GOST R 50143-92 Cramp fixtures for wooden split core boxes. Design 21.060.70
25.120.30

50144 1992 　 GOST R 50144-92 Wedge streiners for wooden split core boxes. Design 21.060.70
25.120.30

50145 1992 　 GOST R 50145-92 Screw strainers for wooden split core boxes. Design 21.060.70
25.120.30

50271 1992 　 GOST R 50271-92 Prevailing torque type steel hexagon nuts. Mechanical and performance properties 21.060.20

50272 1992 　 GOST R 50272-92 Prevailing torque type all-metal hexagon nuts. Property classes 5, 8, 10, 12. Specifications 21.060.20

50273 1992 　 GOST R 50273-92 Prevailing torque type hexagon nuts (with non-metallic insert). Property classes 5, 8 and 10. Specifications 21.060.20

50274 1992 　 GOST R 50274-92 Hexagon flange reduced head bolts. Specifications 21.060.10

50290 1992 　 GOST R 50290-92 Hardened cylindrical pins. Specifications 21.060.50

50336 1992 　 GOST R 50336-92 Grooved pins-full-length taper grooved. Specifications 21.060.50

50337 1992 　 GOST R 50337-92 Grooved pins-full-length parallel grooved with pilot. Specifications 21.060.50

50338 1992 　 GOST R 50338-92 Grooved pins-full-length parallel grooved, with chamber. Specifications 21.060.50

50383 1992 　 GOST R 50383-92 Cone-point straight slatted set screws. Product grades A and B. Specifications 21.060.10

50384 1992 　 GOST R 50384-92 Flat-point straight slotted set screws. Product grades A and B. Specifications 21.060.10

50385 1992 　 GOST R 50385-92 Dog-point straight slotted set screws. Product grades A and B. Specifications 21.060.10

50386 1992 　 GOST R 50386-92 Cup-point straight slotted set screws. Product grades A and B. Specifications 21.060.10

50387 1992 　 GOST R 50387-92 Hexagonal socket cone-point set screws. Product grades A and B. Specifications 21.060.10

50388 1992 　 GOST R 50388-92 Hexagonal socket flat-point set screws. Product grades A and B. Specifications 21.060.10

50389 1992 　 GOST R 50389-92 Hexagonal socket dog-point set screws. Product grades A and B. Specifications 21.060.10

50403 1992 　 GOST R 50403-92 Countersunk head screws. Product grades A and B. Specifications 21.060.10

50404 1992 　 GOST R 50404-92 Slotted ban head screws. Product grades A and B. Specifications 21.060.10

50405 1992 　 GOST R 50405-92 Slotted cheese head screws. Product grades A and B. Specifications 21.060.10

50406 1992 　 GOST R 50406-92 Raised countersunk head screws. Product grade A and B. Specifications 21.060.10

50417 1992 　 GOST R 50417-92 Spring type straight pins, slotted. Specifications 21.060.50

50592 1993 　 GOST R 50592-93 Hexagon nuts with flange. Product grade A. Specifications 21.060.20

50790 1995 　 GOST R 50790-95 Hexagon head bolts with metric fine pitch thread product grades A and B. Specifications 21.060.10

50791 1995 　 GOST R 50791-95 Hexagon head bolts with reduced shank, product grade B (shank diameter approximately equal to pitch diameter). Specifications 21.060.10

50792 1995 　 GOST R 50792-95 Hexagon head bolts with thread to head, product grade C. Specifications 21.060.10

50793 1995 　 GOST R 50793-95 Hexagon head bolts with thread to head product grades A and B. Specifications 21.060.10

50794 1995 　 GOST R 50794-95 Hexagon head bolts, product grade C. Specifications 21.060.10

50795 1995 　 GOST R 50795-95 Hexagon head bolts with metric fine pitch thread and thread to head, product grades A and B. Specifications 21.060.10

50796 1995 　 GOST R 50796-95 Hexagon head bolts, product grades A and B. Specifications 21.060.10

52854 2007 ★ GOST R 52854-2007 Bolts with star-type head and small flange. Specifications 21.060.10

52855 2007 ★ GOST R 52855-2007 Bolts with star-type head and large flange. Specifications 21.060.10

ISO 02702 1993 　 GOST R ISO 2702-93 Heat-treated steel tapping screws. General specifications 21.060.10

ISO 07049 1993 　 GOST R ISO 7049-93 Cross recessed pan head tapping screws. Specifications 21.060.10

ISO 07050 1993 　 GOST R ISO 7050-93 Cross recessed countersunk head tapping screws. Specifications 21.060.10

ISO 07051 1993 　 GOST R ISO 7051-93 Cross recessed raised countersunk head tapping screws. Specifications 21.060.10

ISO 07378 1993 　 GOST R ISO 7378-93 Fasteners. Bolts, screws and studs. Split pin holes and wire holes 21.060.10

ISO 08741 1993 　 GOST R ISO 8741-93 Pins grooved-half-length reverse taper grooved. Specifications 21.060.50

ISO 08742 1993 　 GOST R ISO 8742-93 Pins grooved-third-length centre grooved. Specifications 21.060.50

ISO 08743 1993 　 GOST R ISO 8743-93 Pins grooved-half-length centre grooved. Specifications 21.060.50

ISO 08745 1993 　 GOST R ISO 8745-93 Pins grooved-half-length taper grooved. Specifications 21.060.50

ISO 08746 1993 　 GOST R ISO 8746-93 Pins grooved with round head. Specifications 21.060.50

ISO 08747 1993 　 GOST R ISO 8747-93 Pins grooved with countersunk head. Specifications 21.060.50

ISO 10664 2007 ★ GOST R ISO 10664-2007 Star-type internal socket button for bolts and screws 21.060.10

ISO 14588 2005 　 GOST R ISO 14588-2005 Blind rivets. Terminology and definitions 21.060.40

ISO 14589 2005 　 GOST R ISO 14589-2005 Blind rivets. Mechanical testing 21.060.40

21.080 蝶番、はとめ及びその他の連結ジョイント

Sort Mk 規格番号規格名称(英語) 国際規格分類
( ICSコードの説明 )

25603 1983 　 GOST 25603-83 Joints. Types and basic dimensions 21.080

21.100 軸受

Sort Mk 規格番号規格名称(英語) 国際規格分類
( ICSコードの説明 )

00004-479 1987 　 GOST 4.479-87 The system of product quality factors. Rolling bearings. Nomenclature of quality factors 21.100.20

00520 1989 　 GOST 520-89 [withdrawn]
Rolling bearings. General specifications 21.100.20

00520 2002 　 GOST 520-2002 Rolling bearings. General specifications 21.100.20

00831 1975 　 GOST 831-75 Thrust radial single row ball bearings. Types and boundary dimensions 21.100.20

00832 1978 　 GOST 832-78 Duplexed angular contact ball beraings. Types and boundary dimensions 21.100.20

01978 1981 　 GOST 1978-81 Plain bearing metal bushes. Types and basic dimensions 21.100.10

02893 1982 　 GOST 2893-82 Rolling bearings. Grooves for locking spring rings. Locking shap rings. Dimensions 21.100.20
21.060.60

03189 1989 　 GOST 3189-89 Ball and roller bearings. Identification code 01.080.30
21.100.20

03325 1985 　 GOST 3325-85 Rolling bearings. Tolerance margins and technical requirements for shaft and housing seatings. Fits 21.100.20

03395 1989 　 GOST 3395-89 Ball and roller bearings. Types and constructional varieties 21.100.20

03478 1979 　 GOST 3478-79 Rolling bearings. Boundary dimensions 21.100.20

03635 1978 　 GOST 3635-78 Spherical plain bearings. Specifiications 21.100.20

03722 1981 　 GOST 3722-81 Rolling bearings. Balls. Technical requirements 21.100.20

04060 1978 　 GOST 4060-78 Needle roller bearings. Outer shell and roller assembly. Technical conditions 21.100.20

04252 1975 　 GOST 4252-75 Double-row angular ball bearings. Basic dimensions 21.100.20

04657 1982 　 GOST 4657-82 Single row radial needle-roller bearings. Basic dimensions. Technical requirements 21.100.20

05377 1979 　 GOST 5377-79 Cylindrical roller bearings with short rollers without inner or outer ring. Types and basic dimensions 21.100.20

05720 1975 　 GOST 5720-75 [withdrawn? => GOST 28428-90]
Spherical radial ball bearings. Types and boundary dimensions 21.100.20

05721 1975 　 GOST 5721-75 Spherical radial double row roller bearings. Types and boundary dimensions 21.100.20

06364 1978 　 GOST 6364-78 Double row tapered roller bearings. Basic dimensions 21.100.20

06870 1981 　 GOST 6870-81 Rolling bearings. Needle rollers. Specifications 21.100.20

07199 1977 　 GOST 7199-77 Rubber-metallic ship bearings. Specifications 83.140.99
21.100

07242 1981 　 GOST 7242-81 Single-row radial ball bearings with shields. Specifications 21.100.20

07634 1975 　 GOST 7634-75 Radial multiple row short cilindrical roller bearings. Types and boundary dimensions 21.100.20

07872 1989 　 GOST 7872-89 Single and double direction thrust ball bearings. Specification 21.100.20

07999 1970 　 GOST 7999-70 Liquid friction bearings for rolling mills. Types, basic parameters and dimensions 77.180
21.100

08328 1975 　 GOST 8328-75 Radial short cylindrical roller bearings. Types and boundary dimensions 21.100.20

08338 1975 　 GOST 8338-75 Single row radial ball bearings. Boundary dimensions 21.100.20

08419 1975 　 GOST 8419-75 Four row tapered roller bearings. Boundary dimensions 21.100.20

08530 1990 　 GOST 8530-90 Rolling bearings. Locknuts, washers and cramps for tapered adaptive and withdrawal sleeves. Specifications 21.100.20
21.060

08545 1975 　 GOST 8545-75 Ball and roller bearings with tapered sleeves. Types and boundary dimensions 21.100.20

08882 1975 　 GOST 8882-75 Single row radial sealed ball bearings. Types and boundary dimensions. Technical requirements 21.100.20

08995 1975 　 GOST 8995-75 Single row angular contact ball bearings with one split inner ring. Types and boundary dimensions 21.100.20

09592 1975 　 GOST 9592-75 Ball bearings with broad inner face. Specifications 21.100.20

09942 1990 　 GOST 9942-90 Spherical single thrast-radial roller bearings. Specification 21.100.20

10058 1990 　 GOST 10058-90 Single row radial ball instrument precision bearings. Technical specifications 21.100.20

11521 1982 　 GOST 11521-82 Plain bearings pillow blocks with two bolt holes. Design and dimensions 21.100.10

11522 1982 　 GOST 11522-82 Plain bearings flange bearing bloks with tow bolt heles. Design and dimensions 21.100.10

11523 1982 　 GOST 11523-82 Plain bearings flange bloks with three bolt holes. Design and dimensions 21.100.10

11524 1982 　 GOST 11524-82 Plain bearings flange bearing bloks with four bolt holes. Design and dimensions 21.100.10

11525 1982 　 GOST 11525-82 Plain bearing metal bushes for pilow blocks and for flange plain bearing blocks. Design and dimensions 21.100.10

11607 1982 　 GOST 11607-82 Plain bearing split bearing blocks with twо bolt holes. Design and dimensions 21.100.10

11608 1982 　 GOST 11608-82 Plain bearings split bearing blocks with four bolt holes. Design and dimensions 21.100.10

11609 1982 　 GOST 11609-82 Plain bearings split angle bearing blocks with twо bolt holes. Design and dimensions 21.100.10

11610 1982 　 GOST 11610-82 Plain bearings split angle bearing blocks with four bolt holes. Design and dimensions 21.100.10

11611 1982 　 GOST 11611-82 Plain bearings metal half-liners split bearing blocks. Design and dimensions 21.100.10

11641 1973 　 GOST 11641-73 End caps with groove for felt ring. Design and dimensions 21.100.20

13014 1980 　 GOST 13014-80 Clamping sleeves of rolling bearings. Basic dimensions 21.100.20

13218-01 1980 　 GOST 13218.1-80 Pillow blocks of serie ШМ for rolling bearings of diameters from 47 till 150 mm. Construction and dimensions 21.100.20

13218-02 1980 　 GOST 13218.2-80 Pillow blocks of serie ШМ for rollings of diameters from 160 till 400 mm. Construction and dimensions 21.100.20

13218-03 1980 　 GOST 13218.3-80 Pillow blocks of serie УМ for rollings of diametters from 80 till 150 mm. Constuction and dimensions 21.100.20

13218-04 1980 　 GOST 13218.4-80 Pillow blocks blocks of serie УМ for rolling bearings of diameters from 160 till 400 mm. Constuction and dimensions 21.100.20

13218-05 1980 　 GOST 13218.5-80 Pillow blocks of serie ШБ for rolling bearings of diameters from 90 till 150 mm. Construction and dimensions 21.100.20

13218-06 1980 　 GOST 13218.6-80 Pillow blocks of serie Шm for rolling bearings of diameters from 160 till 400 mm. Construction and dimensions 21.100.20

13218-07 1980 　 GOST 13218.7-80 Pillow blocks of serie УБ for rolling bearings of diameters from 85 till 150 mm. Construction and dimensions 21.100.20

13218-08 1980 　 GOST 13218.8-80 Pillow blocks of serie УБ for rolling bearings of diameters from 160 till 400 mm. Basic dimensions 21.100.20

13218-09 1980 　 GOST 13218.9-80 Pillow blocks of serie РШ for rolling bearings. Construction and dimensions 21.100.20

13218-10 1980 　 GOST 13218.10-80 Pillow blocks of serie РУ for rolling bearings. Construction and dimensions 21.100.20

13218-11 1980 　 GOST 13218.11-80 Rolling bearings pillow blocks. Technical requirements 21.100.20

13219-01 1981 　 GOST 13219.1-81 Low vague end cups for diameters from 47 till 100 mm of pillow blocks. Construction and dimensions 21.100.20

13219-02 1981 　 GOST 13219.2-81 Low vague end cups for diameters from 110 till 400 mm of pillow blocks. Construction and dimensions 21.100.20

13219-03 1981 　 GOST 13219.3-81 High vague end cups for diameters from 47 till 100 mm of pillow blocks. Construction and dimensions 21.100.20

13219-04 1981 　 GOST 13219.4-81 High vague end cups for diameters from 110 till 400 mm of pillow blocks. Constuction and dimensions 21.100.20

13219-05 1981 　 GOST 13219.5-81 Low cups with cup seal for diameters from 47 till 100 mm of pillow blocks. Construction and dimensions 21.100.20

13219-06 1981 　 GOST 13219.6-81 Low cups with cup seal for diameters from 100 till 400 mm of pillow blocks. Construction and dimensions 21.100.20

13219-07 1981 　 GOST 13219.7-81 Medium cups with cup seal for diameters from 47 till 100 mm of pillow blocks. Construction and dimensions 21.100.20

13219-08 1981 　 GOST 13219.8-81 Medium cups with cup seal for diameters from 110 till 400 mm of pillow blocks. Construction and dimensions 21.100.20

13219-09 1981 　 GOST 13219.9-81 High cups with cup seal for diameters from 47 till 100 mm of pillow blocks. Construction and dimensions 21.100.20

13219-10 1981 　 GOST 13219.10-81 High cups with cup seal for diameters from 110 till 400 mm of pillow blocks. Construction and dimensions 21.100.20

13219-11 1981 　 GOST 13219.11-81 Low cups with grooves for diameters from 47 till 100 mm of pillow blocks. Construction and dimensions 21.100.20

13219-12 1981 　 GOST 13219.12-81 Low cups with grooves for fat, diameters from 110 till 400 mm of pillow blocks. Construction and dimensions 21.100.20

13219-13 1981 　 GOST 13219.13-81 Medium cups with grooves for diameters from 47 till 100 mm of pillow blocks. Construction and dimensions 21.100.20

13219-14 1981 　 GOST 13219.14-81 Medium cups with grooves for fat, diameters from 110 till 400 mm of pillow blocks. Construction and dimensions 21.100.20

13219-15 1981 　 GOST 13219.15-81 Hign cups with grooves for fat, diameters from 47 till 100 mm of pillow blocks. Construction and dimensions 21.100.20

13219-16 1981 　 GOST 13219.16-81 High cups with grooves for, diameters from 110 till 400 mm of pillow blocks. Construction and dimensions 21.100.20

13219-17 1981 　 GOST 13219.17-81 Cups for ball bearings of pillow blocks. Technical requirements 21.100.20

18282 1988 　 GOST 18282-88 Plain bearings. Terms and definitions 01.040.21
21.100.10

18511 1973 　 GOST 18511-73 Blind end caps. Design and dimensions 21.100.20

18512 1973 　 GOST 18512-73 End caps with recess for cup seal. Design and dimensions 21.100.20

18513 1973 　 GOST 18513-73 End caps with grooves for fat. Design and dimensions 21.100.20

18514 1973 　 GOST 18514-73 End caps for rolling bearing blocks. Technical requirements 21.100.20

18572 1981 　 GOST 18572-81 Rolling bearings. Cylindrical roller bearings for railways axlcboxes. Basic dimensions 21.100.20

18854 1982 　 GOST 18854-82 Rolling bearings. Methods of calculation of static load ratings and equivalent static load 21.100.20

18854 1994 　 GOST 18854-94 Rolling bearings. Static lood ratings 21.100.20

18855 1982 　 GOST 18855-82 Rolling bearings. Methods of calculation of dynamic load ratings and rating life 21.100.20

18855 1994 　 GOST 18855-94 Rolling bearings. Dinamic load ratings and rating life 21.100.20

20226 1982 　 GOST 20226-82 Shoulders for rolling bearings mounting. Dimensions 21.100.20

20531 1975 　 GOST 20531-75 Combined needle taper roller bearings. Specifications 21.100.20

20821 1975 　 GOST 20821-75 Angular-contact double-row ball bearings with contact angle 60 degree. Specifications 21.100.20

20918 1975 　 GOST 20918-75 Rolling bearings methods of calculation of limited rotation frequency 21.100.20

22696 1977 　 GOST 22696-77 Rolling bearings. Short cylindrical rollers. Technical requirements 21.100.20

22915 1978 　 GOST 22915-78 Liquid friction bearings. Basiс operation rules 21.100

23179 1978 　 GOST 23179-78 Rolling radial ball single row flexible bearings. Specifications 21.100.20

23526 1979 　 GOST 23526-79 Single direction thrust roller bearings with cylindrical rollers. Types and dimensions 21.100.20

24208 1980 　 GOST 24208-80 Mapered adapter sleeves of relling bearings. Basic dimensions 21.100.20

24310 1980 　 GOST 24310-80 Single-rowradial needle roller bearings without rings. Specifications 21.100.20

24368 1980 　 GOST 24368-80 Carbon bearings and packings of water pumps. Technological process of impregnation with fluoride 21.100
21.140

24696 1981 　 GOST 24696-81 Spherical radial double row roller bearings with symmetrical rollers. Basic dimensions 21.100.20

24810 1981 　 GOST 24810-81 Rolling bearings. Clearances 21.100.20

24832 1981 　 GOST 24832-81 Plain bearing bimetal bushes and thick wall bimetal shells. Types and basic dimensions 21.100.10

24833 1981 　 GOST 24833-81 Plain bearing bushes made from sintered material. Types and basic dimensions 21.100.10

24850 1981 　 GOST 24850-81 Ball bearings. Radial single row with two seals and wide inner ring and with spherical outer surface of outer ring. Boundari dimensions 21.100.20

24955 1981 　 GOST 24955-81 Rolling bearings. Terms and definitions 01.040.21
21.100.20

25105 1982 　 GOST 25105-82 Plain bearings metal bushes and half-liners for pillow-blocks and split bearing blocks. Technical requirements 21.100.10

25106 1982 　 GOST 25106-82 Plain bearings split bearing blocks and pllgsw-blocks. Technical requiresents 21.100.10

25143 1982 　 GOST 25143-82 Thin wall and bimetal shells of plain bearings. Main dimensions 21.100.10

25255 1982 　 GOST 25255-82 Rolling bearings. Long cylindrical rollers. Technical requirements 21.100.20

25256 1982 　 GOST 25256-82 Rolling bearings. Tolerances. Terms and definitions 21.100.20
01.040.21

25455 1982 　 GOST 25455-82 Rolling bearings. Tapered and withdrawal sleeves. Technical requirements 21.100.20

26290 1990 　 GOST 26290-90 Radial needle roller combined bearings and double direction thrust bearings. Specifications 21.100.20

26576 1985 　 GOST 26576-85 Rolling bearings. Eccentric and concentric stopping rings and setting serews for ball bearing securing 21.100.20

26676 1985 　 GOST 26676-85 Roller thrust single derection needle bearings without rings. Specifications 21.100.20

27057 1986 　 GOST 27057-86 Single direction thrust tapered roller bearings. Basic dimensions 21.100.20

27164 1986 　 GOST 27164-86 Special instrumentation for operational monitoring bearing vibration in large stationary aggregates. Technical requirements 21.100
17.160

27365 1987 　 GOST 27365-87 Single row tepered roller bearingsexrta load ratings. Boundary dimensions 21.100.20

27672 1988 　 GOST 27672-88 Plain bearings. Wrapped bushes. Dimensions, tolerances and methods of checking 21.100.10

27673 1988 　 GOST 27673-88 Plain bearings. Dimensions and materials quality checking methods 21.100.10

28339 1989 　 GOST 28339-89 Plain bearings. Methods of dimensional control 21.100.10

28340 1989 　 GOST 28340-89 Plain bearings. Metallic thin-walled half bearings. Determination of the sigma* 0,01-limit 21.100.10

28341 1989 　 GOST 28341-89 Plain bearings. Thin-walled flanged half bearings. Dimensions, tolerances and metnods of checking 21.100.10

28342 1989 　 GOST 28342-89 Plain bearings. Thin-walled half-bearings. Dimensions, tolerances and methods of checking 21.100.10

28428 1990 　 GOST 28428-90 Double-row spherical ball radial bearings. Technical specifications 21.100

28707 1990 　 GOST 28707-90 Rolling bearings. Separate shaped thrust collars. Specifications 21.100.20

28773 1990 　 GOST 28773-90 Plain bearings. Wrapped bushes with anti-friction layer based on polytetrafluoroethylene-KV. Dimensions and tolerances 21.100.10

28774 1990 　 GOST 28774-90 Plain bearings. Wrapped bushes with anti-friction layer based on polyacetal-KX. Types, dimensions and tolerances 21.100.10

28801 1990 　 GOST 28801-90 Plain bearings. Ringtype thurst washes. Tupes, dimensions and tolerances 21.100.10

28813 1990 　 GOST 28813-90 Plain bearings. Metallic multilayer materials for thin-walled plain bearings 21.100.10

29201 1991 　 GOST 29201-91 Plain bearings. Copper alloy bushes 21.100.10

29202 1991 　 GOST 29202-91 Plain bearings. Hardness testing of bearing metals. Solid materials 21.100.10

29203 1991 　 GOST 29203-91 Plain bearings. Pressed bimetallic half thrust washers. Features and tolerances 21.100.10

29204 1991 　 GOST 29204-91 Plain bearings. Compression testing of metallic bearing materials 21.100.10

29212 1991 　 GOST 29212-91 Plain bearings. Hardness testing of bearing metalls. Compound materials 21.100.10

29241 1991 　 GOST 29241-91 Rolling bearings. Single direction angular contact ball bearings with the contact angle 60 grades. Specifications 21.100.20

29242 1991 　 GOST 29242-91 Single row thrust short cylindrical roller bearings without rings. Specifications 21.100.20

52545-01 2006 　 GOST R 52545.1-2006 Rolling bearings. Measuring methods for vibration. Part 1. Fundamentals 21.100.20

52859 2007 ★ GOST R 52859-2007 Rolling bearings. General specifications 21.100.20

ISO 02795 2001 　 GOST ISO 2795-2001 Plain bearings. Sintered bushes. Dimensions and tolerances 21.100.10

ISO 03548 2002 　 GOST ISO 3548-2002 Plain bearings. Thin-walled half bearings with or without flange. Tolerances, design features and methods of checking 21.100.10

ISO 04378-01 2001 　 GOST ISO 4378-1-2001 Plain bearings. Terms, definitions and classification. Part 1. Design, bearing materials and their properties 21.100.10
01.040.21

ISO 04378-04 2001 　 GOST ISO 4378-4-2001 Plain bearings. Terms, definitions and classification. Part 4. Calculation parameters and their symbol 21.100.10
01.040.21

ISO 04386-01 1994 　 GOST R ISO 4386-1-94 Plain bearings. Metallic multilayer plain. Non-destructive ultrasonic testing of bond for bearing metal layer and backing 21.100.10

ISO 04386-02 1999 　 GOST ISO 4386-2-99 Plain bearings. Metallic multilayer plain bearings. Destructive testing of bond strength between the bearing metal and the backing 21.100.10

ISO 04386-03 1996 　 GOST ISO 4386-3-96 Plain bearings. Metallic multilayer plain bearings. Not-destructive penetrant testing 21.100.10

ISO 06280 1994 　 GOST R ISO 6280-94 Plain bearings. Requirements on backings for thick-walled multilayer bearings 21.100.10

ISO 06524 1995 　 GOST ISO 6524-95 Plain bearings. Рeripheral length checking of thin-walled half bearings 21.100.10

ISO 07902-01 2001 　 GOST ISO 7902-1-2001 Hydrodynamic plain journal bearings under steady-state conditions. Circular cylindrical bearings. Part 1. Calculation procedure 21.100.10

ISO 07902-02 2001 　 GOST ISO 7902-2-2001 Hydrodynamic plain journal bearings under steady-state conditions. Circular cylindrical bearings. Part 2. Functions used in the calculation procedure 21.100.10

ISO 07902-03 2001 　 GOST ISO 7902-3-2001 Hydrodynamic plain journal bearings under steady-state conditions. Circular cylindrical bearings. Part 3. Permissible operational parameters 21.100.10

ISO 07904-01 2001 　 GOST ISO 7904-1-2001 Plain bearings. Symbols. Part 1. Basic symbols 01.075
21.100.10

ISO 07904-02 2001 　 GOST ISO 7904-2-2001 Plain bearings. Symbols. Part 2. Applications 21.100.10
01.075

ISO 07905-01 1999 　 GOST ISO 7905-1-99 Plain bearings. Bearing fatigue. Plain bearings in test rigs under conditions of hydrodynamic lubrication 21.100.10

ISO 07905-02 1999 　 GOST ISO 7905-2-99 Plain bearings. Bearing fatigue. Test with a cylindrical specimen of a metallic bearing material 21.100.10

ISO 07905-03 1999 　 GOST ISO 7905-3-99 Plain bearings. Bearing fatigue. Test on plain strips of a metallic multilayer bearing material 21.100.10

ISO 07905-04 1999 　 GOST ISO 7905-4-99 Plain bearings. Bearing fatigue. Test on half-bearings of a metallic multilayer bearing material 21.100.10

ISO 12301 1995 　 GOST ISO 12301-95 Plain hearings. Quality control techniques and inspection of geometrical and material quality characteristics 21.100.10

ISO 12306 1996 　 GOST ISO 12306-96 Plain bearings. Measurement of wall thickness of thin-walled half-bearings and thin-walled bushes 21.100.10

ISO 12307-01 1996 　 GOST ISO 12307-1-96 Plain bearings. Wrapped bushes. Checking the outside diameter 21.100.10

ISO 12307-02 1999 　 GOST ISO 12307-2-99 Plain bearings. Wrapped bushes. Checking the inside diameter 21.100.10

21.120 軸及び継手

Sort Mk 規格番号規格名称(英語) 国際規格分類
( ICSコードの説明 )

01139 1958 　 GOST 1139-58 Basic norms of interchangeability. Straight-sided splines. Dimensions and tolerances 21.120.30

01139 1980 　 GOST 1139-80 Basic norms of interchangeability. Straight-sided splined joints. Dimensions and tolerances 21.120.30

04907 1981 　 GOST 4907-81 Control spindle ends of electronic components. Types and basic dimensions 21.120.10
31.020

05147 1980 　 GOST 5147-80 Joint clutches. Basic parameters. Design and dimensions 21.120.20

05147 1997 　 GOST 5147-97 Joint couplings. Parameters, design and dimensions 21.120.20

06033 1951 　 GOST 6033-51 Basic norms of interchangeability involute splines 21.120.30

06033 1980 　 GOST 6033-80 Basic norms of interchangeability. Involute splined joints with 30 gr. profile angle. Dimensions, tolerances and measurable sizes 21.120.30

08790 1979 　 GOST 8790-79 Rectangular parallel keys with screwing on the shafts. Dimensions 21.120.30

09650 1980 　 GOST 9650-80 Pins and pins with head. Types. Design and dimensions. Technical requirements 21.120.10

10748 1979 　 GOST 10748-79 Basic norms of interchangeability. Keyed joints with prismatic high keys. Dimensions of keys and keyways. Tolerances and fits 21.120.30

12080 1966 　 GOST 12080-66 Cylindrical ends of the shafts 21.120.10

12081 1972 　 GOST 12081-72 1:10 Conical shaft ends. Basis dimensions. Permissible torquie 21.120.10

14151 1969 　 GOST 14151-69 Hydrodynamic adjustable single supported couplings. Basic parameters and dimensions 21.120.20

14737 1969 　 GOST 14737-69 Screw fixed sunk keys. Construction 25.060.99
21.120.30

15620 1977 　 GOST 15620-77 Overload claw clutches for general industrial practice. Main data and dimensions 21.120.20

15620 1993 　 GOST 15620-93 Safety jaw clutch couplings. Parameters and dimensions 21.120.20

15622 1977 　 GOST 15622-77 Slipping clutches. Main parameters and dimensions 21.120.20

15622 1996 　 GOST 15622-96 Safety slipping couplings. Parameters, design and dimensions 21.120.20

18306 1972 　 GOST 18306-72 Electromagnetic clutches with mechanical connection. Terms and definitions 01.040.21
21.120.20

19107 1973 　 GOST 19107-73 [withdrawn?]
Mechanical couplings. Series of normal torques 21.120.20

19107 1997 　 GOST 19107-97 Mechanical couplings. Series of nominal turning moments 21.120.20

19534 1974 　 GOST 19534-74 Balancing of rotating bodies. Terms 01.040.21
21.120.40

20076 1989 　 GOST 20076-89 Balancing machines. Bazic parameters and dimensions. Standards of accuracy 21.120.40

20720 1981 　 GOST 20720-81 Cam disk couplings. Basic parameters. Overall and attachment dimensions 21.120.20

20720 1993 　 GOST 20720-93 Double-slider couplings. Parameters and dimensions 21.120.20
21.060.60

20742 1981 　 GOST 20742-81 Single chain couplings. Main data. Dimensions 21.120.20

20742 1993 　 GOST 20742-93 Chain couplings. Parameters and dimensions 21.120.20
21.060.60

20761 1980 　 GOST 20761-80 Flange couplings. Main data. Dimensions 21.120.20

20761 1996 　 GOST 20761-96 Flange couplings. Parameters, design and dimensions 21.120.20

21424 1975 　 GOST 21424-75 Pin flexible couplings. Main data. Overall and coupling. Dimensions 21.120.20

21573 1976 　 GOST 21573-76 Multidisk electromagnetic clutches with magnetic-flux-conducting disks. Basic parameters and dimensions 21.120.20

21574 1988 　 GOST 21574-88 Electromagnetic clutches with magnetic-flux-conducting discs. Specifications 21.120.20

22061 1976 ★ GOST 22061-76 [withdrawn? =>GOST ISO 1940-1-2007]
Machines and technological equipment. Balance quality grade system. General 21.120.40

23360 1978 　 GOST 23360-78 Basic norms of interchangeability. Keys couplings with prismatic Keys. Keys dimensions and Keyways sections. Limits and fits 21.120.30

24068 1980 　 GOST 24068-80 Basic norms of interchangeability. Keyed joints with taper keys. Dimensions of keys and keyways. Tolerances and fits 21.120.30

24069 1980 　 GOST 24069-80 Basic norms of interchangeability. Keyed joints with normal tangent keys. Dimensions of keys and keyways. Tolerances and fits 21.120.30

24069 1997 　 GOST 24069-97 Basic norms of interchangeability. Tangential keys and keyways 21.120.30

24070 1980 　 GOST 24070-80 Basic norms of interchangeability. Keyed joints with increased tangent keys. Dimensions of keys and keyways. Tolerances and fits 21.120.30

24071 1980 　 GOST 24071-80 Basic norms of interchangeability. Keyed joints with woodruf keys. Dimensions of keys and keyways. Tolerances and fits 21.120.30

24071 1997 　 GOST 24071-97 Basic norms of interchangeability. Woodruff keys and keyways 21.120.30

24246 1980 　 GOST 24246-80 Boxclutches. Basic parameters. Design and dimensions 21.120.20

24246 1996 　 GOST 24246-96 Box clutches. Parameters, design and dimensions 21.120.20

24266 1980 　 GOST 24266-80 Shaft ends of reducers and motor-reducers. Basic dimensions, allowable torques 21.120.10
21.200

24266 1994 　 GOST 24266-94 Shaft ends reducers and motor-reducers. Basic dimensions, allonable torgues 21.120.10
21.200

24386 1991 　 GOST 24386-91 Driving and driven machines. Shaft heights 21.120.10

25021 1981 　 GOST 25021-81 Disk flexible couplings. Main data and dimensions 21.120.20

26455 1985 　 GOST 26455-85 Semifixed disk couplings. Main parameters and dimensions 21.120.20

26455 1997 　 GOST 26455-97 Semifixed disk couplings. Parameters, design and dimensions 21.120.20

26875 1986 　 GOST 26875-86 Vibration. Portable balancing equipment. Technical requirements 21.120.40

27286 1987 　 GOST 27286-87 Power friction clutches with electromagnetic shifting. General specifications and test methods 21.120.20

27870 1988 　 GOST 27870-88 Vibration. Evaluation of flexible rotor balancing quality 21.120.40

28989-1991 　 GOST 28989-91 Balancing machines. Symbols for front panels 01.080.30
21.120.40

29175 1991 　 GOST 29175-91 Thin parallel keys and their corresponding keyways. Dimensions and tolerances 21.120.30

31350 2007 ★ GOST 31350-2007 Vibration. Industrial fans. Requirements for vibration levels and balance quality 21.120.40
23.120

50266 1992 　 GOST R 50266-92 Resilient shaft couplings. Information to be supplied by users and manufactures 21.120.20

50371 1992 　 GOST R 50371-92 Mechanical couplings for general machine-building application. Terms and definitions 01.040.21
21.120.20

50536 1993 　 GOST R 50536-93 Basic requirements for interchangeability. Thin taper keys with and without gib head and their corresponding keyways. Dimensions and tolerances 21.120.30

50892 1996 　 GOST R 50892-96 Elastic couplings with a toroid-shape shell. Specifications 21.120.20

50893 1996 　 GOST R 50893-96 Safety bool clutches. Basic parameters and dimensions. Technical requirements 21.120.20

50894 1996 　 GOST R 50894-96 Star elastic clutches. Specifications 21.120.20

50895 1996 　 GOST R 50895-96 Toothed clutches. Specifications 21.120.20

ISO 01940 2007 ★ GOST ISO 1940-1-2007 Vibration. Balance quality requirements for rotors in a constant (rigid) state. Part 1. Specification and verification of balance tolerances 21.120.40

ISO 01940-02 1999 　 GOST ISO 1940-2-99 Mechanical vibration. Balance quality requirements of rigid rotors. Part 2. Balance errors 21.120.40

ISO 02371 1997 　 GOST ISO 2371-97 Field balancing equipment. Description and evaluation 21.120.40

ISO 11342 1995 　 GOST ISO 11342-95 Mechanical vibration-methods and criteria for the mechanical balancing of flexible rotors 21.120.40

ISO 20806 2007 ★ GOST R ISO 20806-2007 Vibration. Balancing of medium and large rotors in situ. Criteria and safeguards 21.120.40

21.140 シール、パッキン
注: パイプ及び継手に関するその他の規格→ 23.040.80

Sort Mk 規格番号規格名称(英語) 国際規格分類
( ICSコードの説明 )

01198 1993 　 GOST 1198-93 Asbestos brake bands. Specifications 21.140

01786 1995 　 GOST 1786-95 Friction linings. General requirements 21.140

02198 1976 　 GOST 2198-76 Reinforced asbestos cloth and gaskets of it. Specifications 21.140

05152 1984 　 GOST 5152-84 Packings. Specifications 21.140

10851 1994 　 GOST 10851-94 Friction articles of retinax. Specifications 21.140

12856 1984 　 GOST 12856-84 Asbestos-steel sheets. Specifications 21.140

12856 1996 　 GOST 12856-96 Asbestos-steel sheets and gaskets. Specifications 21.140

15853 1970 　 GOST 15853-70 Brake linings. Dimensions 21.140

15960 1979 　 GOST 15960-79 Friction flexible asbestos materials and products of them. Specifications 21.140

15960 1996 　 GOST 15960-96 Friction flexible аsbestos materials and products of them. Specifications 21.140
43.040.40

22030 1991 　 GOST 22030-91 Products and materials, asbestos technical. Method of test for moisture, substance loss by heating and asbestos content 21.140

24036 1980 　 GOST 24036-80 Seal sheet materials, asbestos polymer. Method of test for folding resistance 21.140

24037 1990 　 GOST 24037-90 Seal sheet materials, asbestos, polymer. Method of test for resistance to liquids 21.140

24038 1990 　 GOST 24038-90 Seal sheet materials, asbestos polymer. Method of test for compressibility and recovery 21.140

24039 1980 　 GOST 24039-80 Seal sheet materials, asbestos polymer. Method of measurements of size and density 21.140

24368 1980 　 GOST 24368-80 Carbon bearings and packings of water pumps. Technological process of impregnation with fluoride 21.100
21.140

27513 1987 　 GOST 27513-87 Friction products marking, packing, transportation and storage 21.140

50507 1993 　 GOST R 50507-93 Friction brake products. General requirements 21.140

51571 2000 　 GOST R 51571-2000 Metal bellows expansion joints and seals. General technical requirements 23.040.80
21.140

21.160 ばね
注: ばね用鋼→ 77.140.25

Sort Mk 規格番号規格名称(英語) 国際規格分類
( ICSコードの説明 )

03057 1990 　 GOST 3057-90 Disk springs. Specifications 21.160

13764 1986 　 GOST 13764-86 Cylindrical helical compression (tension) springs made of round steel. Classification 21.160

13765 1986 　 GOST 13765-86 Cilindrical helical compression (tension) springs made of round steel. Designation of parameters, methods for determination of dimensions 21.160

13766 1986 　 GOST 13766-86 Cylindrical helical compression (tension) springs of I class and of 1 category made of round steel. Main parameters of coils 21.160

13767 1986 　 GOST 13767-86 Cylindrical helical compression (tension) springs of I class and of 2 category made of round steel. Main parameters of coils 21.160

13768 1986 　 GOST 13768-86 Cylindrical helical compression (tension) springs of 1class and of 3 category made of round steel. Main parameters of coils 21.160

13769 1986 　 GOST 13769-86 Cylindrical helical compression springs of 1 class and of 4 category made of round steel. Main parameters of coils 21.160

13770 1986 　 GOST 13770-86 Cylindrical helical compression (tension) springs of II class and of 1 category made of round steel. Main parameters of coils 21.160

13771 1986 　 GOST 13771-86 Cylindrical helical compression (tension) springs of ii class and of 2 category made of round steel. Main parameters of coils 21.160

13772 1986 　 GOST 13772-86 Cylindrical helical compression (tension) springs of II class and 3 category made of round steel. Main parameters of coils 21.160

13773 1986 　 GOST 13773-86 Cylindrical helical compression springs of II class and of 4 category made of round steel. Main parameters of coils 21.160

13774 1986 　 GOST 13774-86 Cylindrical helical compression springs of iii class and of i category made of round steel. Main parameters of coils 21.160

13775 1986 　 GOST 13775-86 Cylindrical helical compression springs of iii class and of 2 category made of round steel. Main parameters of coils 21.160

13776 1986 　 GOST 13776-86 Cylindrical helical compression springs of III class and of 3 category made of round steel. Main parameters of coils 21.160

13940 1986 　 GOST 13940-86 Retaining spring flat concentric rings for shafts and grooves for them. Dimensions 21.160

13941 1986 　 GOST 13941-86 Retaining spring concentric rings for bores and grooves for them. Dimensions 21.160

13942 1986 　 GOST 13942-86 Retaining spring flat eccentric rings for shafts and grooves for them. Dimensions 21.160

13943 1986 　 GOST 13943-86 Retaining spring flat eccentric rings for bores and grooves for them. Dimensions 21.160

13944 1986 　 GOST 13944-86 Retaining spring flat rings and grooves for them. Specifications 21.160

16118 1970 　 GOST 16118-70 Cylindrical helical compression (extension) springs made of round steel. Technical requirements 21.160

50753 1995 　 GOST R 50753-95 Cylindrical helical compression (extension) springs made of special streels and alloy. General specifications 21.160

21.180 軸受箱、エンクロージャ、その他の機械部品

Sort Mk 規格番号規格名称(英語) 国際規格分類
( ICSコードの説明 )

12619 1978 　 GOST 12619-78 Conical heads with knuckle apex angle 60 and90 degree s. General dimensions 21.180

12620 1978 　 GOST 12620-78 Conical heads without knuckle, apex angles 60, 90 and 120 degrees. General dimensions 21.180

12621 1978 　 GOST 12621-78 Conical heads without knuckle, apex angle 140 degrees. General dimensions 21.180

12622 1978 　 GOST 12622-78 Flat heads witch knuckle. General dimensions 21.180

12623 　 GOST 12623-78 Flat neads without knuckle. General dimensions 21.180

13376 1978 　 GOST 13376-78 Conical heads and connections of vessels and apparatus. Series of angles at the vertex 21.180

26421 1990 　 GOST 26421-90 Ellipsoidal flanged bottoms made of aluminium. Dimensions 21.180

21.200 歯車

Sort Mk 規格番号規格名称(英語) 国際規格分類
( ICSコードの説明 )

00004-124 1984 　 GOST 4.124-84 Product-quality index system. Reduction gears, geared motors, variators. Nomenclature of characteristics 03.120
21.200

01643 1981 　 GOST 1643-81 Cylindrical gears pairs. Accuracy 21.200

01758 1981 　 GOST 1758-81 Basic norms of interchangeability. Bevel and hyppoid gears. Tolerances 21.200

02185 1966 　 GOST 2185-66 Spur gears. Basic parameters 21.200

03675 1981 　 GOST 3675-81 Basic requirements for interchangeability. Cylindrical worm gears. Tolerances 21.200

08889 1988 　 GOST 8889-88 Gears of turbine and compressor machines. Technical requirements. Control methods 21.200

09178 1981 　 GOST 9178-81 Basic requirements for interchangeability. Cylindrical fine-pitch gears. Tolerances 21.200

09368 1981 　 GOST 9368-81 Basic requiremets for interchangeability. Fine pitch bevel gears. Tolerances 21.200

09369 1977 　 GOST 9369-77 Globoid gear pairs. Basic parameters 21.200

09563 1960 　 GOST 9563-60 Modules of gears 21.200

09587 1981 　 GOST 9587-81 Basic requirement for interchangeability. Gears. Basic rack of cogged finemodule gears 21.200

09774 1981 　 GOST 9774-81 Basic requirements for interchangeability. Cylindrical small modyle worm pairs. Tolerances 21.200

10242 1981 　 GOST 10242-81 Basic norms of interchangeability. Rack-and-pinion gear pairs. Tolerances 21.200

12289 1976 　 GOST 12289-76 Bevel gears. Basic parameters 21.200

13506 1981 　 GOST 13506-81 Basic requirements for interchangeability. Rock-on-pinion of finemodule gears.Tolerances 21.200

13552 1981 　 GOST 13552-81 Driving toothed chains. Specifications 21.200

13678 1973 　 GOST 13678-73 Cylindrical small module gear. Pairs with watch profile. Types, basic parameters and dimensions, tolerances 21.200

13733 1977 　 GOST 13733-77 Cylindrical small module straight and helical gears. Types. Basic parameters and dimension 21.200

13754 1981 　 GOST 13754-81 Basic requirements for interchangeability. Gearings conical with straight gears. Basic rack 21.200

13755 1981 　 GOST 13755-81 Basic requirements for interchangeability. Gearings cylindric evolvent gears. Basic rack 21.200

14186 1969 　 GOST 14186-69 Novikov spur gears. Modules 21.200

15023 1976 　 GOST 15023-76 Novikov spur gears with double line of action. Basic rack 21.200

16202 1981 　 GOST 16202-81 Basic requirements for interchangeability. Gearings conical with circular gears. Basic rack 21.200

16502 1983 　 GOST 16502-83 Basic requirements for interchangeability. Globoid gears. Tolerances 21.200

16530 1983 　 GOST 16530-83 Gears. General terms, definitions and symbols 01.040.21
21.200

16531 1983 　 GOST 16531-83 Cylindrical gears. Terms, definitions and symbols 01.040.21
21.200

16532 1970 　 GOST 16532-70 Cylindrical involute external gear pairs. Calculation of geometry 21.200

17696 1989 　 GOST 17696-89 Globoid gears. Calculation of geometry 21.200

17744 1972 　 GOST 17744-72 Novikov silindrical gears with double line of action. Calculation of geometry 21.200

18498 1989 　 GOST 18498-89 Worm gear pairs. Terms, definitions and symbols 01.040.21
21.200

19036 1981 　 GOST 19036-81 Cylindrical worm gear pairs. Basic worm and basic generating worm 21.200

19036 1994 　 GOST 19036-94 Cylindrical worm gear pairs. Basic worm and basic generating worm 21.200

19274 1973 　 GOST 19274-73 Cylindrical involute internal gear pairs. Calculation of geometry 21.200

19325 1973 　 GOST 19325-73 Bevel gear pairs. Terms, definitions and symbols 01.040.21
21.200

19326 1973 　 GOST 19326-73 Spiral bevel gear pairs. Calculation of geometry 21.200

19624 1974 　 GOST 19624-74 Straight bevel gear pairs. Calculation of geometry 21.200

19650 1974 　 GOST 19650-74 [withdrawn]
Gylindrical worm gear pairs. Calculation of geometry 21.200

19650 1997 　 GOST 19650-97 Cylindrical worm gear pairs. Calculation of geometry 21.200

19672 1974 　 GOST 19672-74 Cylindrical worm gear pairs. Modules and coefficients of worm diameter 21.200

20184 1981 　 GOST 20184-81 Cylindrical small module worm pairs. Basic worm and basic generating worm 21.200

20373 1980 　 GOST 20373-80 Reducers and motor-reducers. Assembly variation symbols 21.200

20373 1994 　 GOST 20373-94 Reducers and gear-motors. Assembly variation 21.200

21354 1987 　 GOST 21354-87 Gilindrical evolvent gears of external engagment. Strength calculation 21.200

21425 1975 　 GOST 21425-75 Straight-sided splines. Load capacity calculation methods 21.200

22850 1977 　 GOST 22850-77 Spiroid gears. Terms, definitions and symbols 01.040.21
21.200

24266 1980 　 GOST 24266-80 Shaft ends of reducers and motor-reducers. Basic dimensions, allowable torques 21.120.10
21.200

24266 1994 　 GOST 24266-94 Shaft ends reducers and motor-reducers. Basic dimensions, allonable torgues 21.120.10
21.200

24438 1980 　 GOST 24438-80 Globoid gears. Basic worm and basic generating worm 21.200

24439 1980 　 GOST 24439-80 Harmonic drive reduction gearmotors tipe mb3. Main characteristics and dimensions 21.200

25022 1981 　 GOST 25022-81 Reduction planetari. Basic parameters 21.200

25301 1982 　 GOST 25301-82 [withdrawn]
Cylindrical reducing gear. Basic parameters 21.200

25301 1995 　 GOST 25301-95 Cylindrical reducing gears. Parameters 21.200

26218 1984 　 GOST 26218-84 Reducers and harmonic reduction geared motors. Main characteristics 21.200

26218 1994 　 GOST 26218-94 Harmonic drive reducers and reduction gearmotors. Parameters anddimensions 21.200

26543 1985 　 GOST 26543-85 Planetaru gear motors. Basic characteristics 21.200

26543 1994 　 GOST 26543-94 Planetary gearmotors. Basic parameters 21.200

26957 1986 　 GOST 26957-86 Variatore with wide angle beit pylleys. General specifications 21.200

26957 1997 　 GOST 26957-97 Variators with wideangle belt pulleys. General specifications 21.200

27142 1986 　 GOST 27142-86 General-purpose bevel and bevel-cylindrical gear speed reducers. Ranges of basic parameters 21.200

27142 1997 　 GOST 27142-97 Bevel and bevel-cylindrical reducing gears. Parameters 21.200

27701 1988 　 GOST 27701-88 Reduction single cylindrical. Basic parameters 21.200

27871 1988 　 GOST 27871-88 Reducers of general usage. Methods for the determination of the sound power level 21.200

28358 1989 　 GOST 28358-89 General-purpose speed variators with flexible coupling. Terms and definitions 01.040.21
21.200

29067 1991 　 GOST 29067-91 Reducers and motor-reducers. Classifications 21.200

29285 1992 　 GOST 29285-92 Reducers and motor-reducers. General requirements to the methods of experiments 21.200

30077 1993 　 GOST 30077-93 Motorisea conveyor drums. Basic characteristics 21.200

30078-01 1993 　 GOST 30078.1-93 Harmonic glars. General technical requirements 21.200

30078-02 1993 　 GOST 30078.2-93 Harmonic gears. Types. Main parameters and dimensions 21.200

30164 1994 　 GOST 30164-94 Reducers and gear-motors, block-modulus drives. Types of construction and mounting arrangements 21.200

30223 1995 　 GOST 30223-95 Motorised conveyor drums. General specifications 21.200

30224 1996 　 GOST 30224-96 Novikov cilindrical gears with hardness of teeth surface not less 35 HRCэ. Basic rack 21.200

30525 1997 　 GOST 30525-97 Cone variable-speed drives. Parameters 21.200

50370 1992 　 GOST R 50370-92 Reducers and motor-reducers for general machine-building application. Terms and definitions 01.040.21
21.200

50531 1993 　 GOST R 50531-93 Basic requirements for interchangeability. Cylindric evolvent highly stressed gearings. Basic rack 21.200

50891 1996 　 GOST R 50891-96 Machine reducers. General specifications 21.200

50968 1996 　 GOST R 50968-96 Gearmotors of general purpose. General standard specifications 21.200

ISO 08579-02 1999 　 GOST R ISO 8579-2-99 Mechanical vibration. Determination of mechanical vibration of gear units during acceptance testing 21.200
17.160

21.220 フレキシブル駆動及び動力伝達

Sort Mk 規格番号規格名称(英語) 国際規格分類
( ICSコードの説明 )

00191 1982 　 GOST 191-82 Block load chains. Specifications 21.220.30

00588 1981 　 GOST 588-81 Pulling block chains 21.220.30

00589 1985 　 GOST 589-85 Detachable pulling chains 21.220.30

00591 1969 　 GOST 591-69 Chain transmission sprocket wheels for roller chains. Methods of calculation and construction of tooth form and cutting tool 21.220.30

00592 1981 　 GOST 592-81 Chain wheels for plate link chains. Methods of calculation and construction of teeth profile. Tolerances 21.220.30

00593 1975 　 GOST 593-75 Wheers for detachable pulling chains. Methods of design and construction of tooth profile. Tolerances 21.220.30

01284-01 1989 　 GOST 1284.1-89 Y-belts of standard cross-sections. Basic dimensions and control methods 21.220.10

01284-02 1989 　 GOST 1284.2-89 Y-belts of standart cross-sections. Specifications 83.140
21.220.10

01284-03 1980 　 GOST 1284.3-80 V-belts of standard cross-sections. Calculation of transmissions and transmitted powers 21.220.10

01284-03 1996 　 GOST 1284.3-96 V-belts of standart cross-sections. Transmitted powers 21.220.10

04267 1978 　 GOST 4267-78 Long-like roller chains for coveyors and elevators. Technical conditions 21.220.30
53.040.20

10819 1975 　 GOST 10819-75 Varible speed chain drives. Basic parameters 21.220.30

10819 1993 　 GOST 10819-93 Variable speed chain drives. Parameters 21.220.30

12996 1990 　 GOST 12996-90 Pulling fork chains. Specifications 21.220.30

13561 1989 　 GOST 13561-89 Chain wheels for pulling round link chains. Design formula and construction of tooth profile 21.220.30

13568 1975 　 GOST 13568-75 Transmission roller and bush chains. General specifications 21.220.30

13568 1997 　 GOST 13568-97 Driving roller and bush chains. General specifications 21.220.30

13576 1981 　 GOST 13576-81 Chain wheels for driving tooth chains. Method of calculation and constraction of tooth form. Tolerances 21.220.30

20889 1988 　 GOST 20889-88 Pulleys for driving V-belts with normal sections. General specifications 21.220.10

21098 1982 　 GOST 21098-82 Cinematik chains. Methods of calculation accuracy 21.220.30

21834 1987 　 GOST 21834-87 High-precision heavy-duty transmission roller chains. Specifications 21.220.30

22931 1978 　 GOST 22931-78 Bp type variators with wide angle belt with two adjustable pulleys. Basic parameters 21.220.10

22931 1993 　 GOST 22931-93 Wide v-belt variable-speed drives. Parameters 21.220.30

23540 1979 　 GOST 23540-79 Balance leaf chains with solid pins. Specifications 21.220.30

23831 1979 　 GOST 23831-79 V-drive rubber coated fabric flat belts. Specifications 83.140.99
21.220.10

24399 1980 　 GOST 24399-80 Roller chains. Terms and definitions 01.040.21
21.220.30

24848-01 1981 　 GOST 24848.1-81 Variator V-belts for industrial equipment. Basic sizes and methods of control 83.140.99
21.220.10

24848-02 1981 　 GOST 24848.2-81 Variator V-belts for industrial equipment. Specifications 83.140.99
21.220.10

24848-03 1981 　 GOST 24848.3-81 Variator V-belts for industrial equipment. Calculation of drives and transmitted power 83.140.99
21.220.10

25996 1983 　 GOST 25996-83 Round link high-tensile chains for mining equipment. Specifications 21.220.30

25996 1997 　 GOST 25996-97 Round link high - tensile chains for mining eguipment. Specifications 21.220.30
73.100

26379 1984 　 GOST 26379-84 Wide V-belts for variable-speed drives of agricultural machines. Specifications 83.140.99
21.220.10

28500 1990 　 GOST 28500-90 Synchronous belt drivers. Terms and definitions 01.040.21
21.220.10

30188 1997 　 GOST 30188-97 Calibrated lifting chains of high strength. Specifications 21.220.30
53.020.30

30222 1995 　 GOST 30222-95 Cone variable speed drives. General specifications 21.220.30

30441 1997 　 GOST 30441-97 Short link chain for lifting purposes, non - calibrated grade T(8). Specifications 21.220.30
53.020.30

30442 1997 　 GOST 30442-97 Roller transmission chains for cycles. Specifications 21.220.30
43.150

50440 1992 　 GOST R 50440-92 Flat transmission belts and corresponding pulleys. Widths 21.220.10
83.140.99

50441 1992 　 GOST R 50441-92 Flat transmission belts. Lengths 21.220.10
83.140.99

50640 1994 　 GOST R 50640-94 Pulleys belt drives. General technical requirements 21.220.10

50641 1994 　 GOST R 50641-94 Grooved pulleys for glassical and narrow V-belts. System based on datum width 21.220.10

50642 1994 　 GOST R 50642-94 Pulleys belt drives. System based on datum width. Geometrical inspection of grooves 21.220.10

ISO 01081 1994 　 GOST R ISO 1081-94 Drives using V- belts and qrooved pulleys. Terms and definitions 01.040.21
21.220.10

21.260 潤滑システム
注: 潤滑剤→ 75.100

Sort Mk 規格番号規格名称(英語) 国際規格分類
( ICSコードの説明 )

00012-02-040 1979 　 GOST 12.2.040-79 Occupational safety standards system. Hydraulic drives and lubricating system. General safety requirements 13.100
23.100
21.260

00012-02-086 1983 　 GOST 12.2.086-83 Occupational safety standards system. Positive-displacement hydraulic drives and lubricating systems. General safety requirements for mounting, testing and maintenance 13.100
23.100
21.260

03564 1984 　 GOST 3564-84 Multioutlet oil-lubricating plants. Specifications 21.260

06911 1971 　 GOST 6911-71 Dual-line feeders for centralized lubricating systems. Specifications 21.260

06918 1981 　 GOST 6918-81 Line screen grease strainers. Specifications 21.260

11700 1980 　 GOST 11700-80 Two-line lubricating stations. Specifications 21.260

12445 1980 　 GOST 12445-80 Hydraulic and pneumatic drives and lubricating systems. Nominal pressures 23.100
21.260

12447 1980 　 GOST 12447-80 Hydraulic and pneumatic drives and lubricating systems. Standard diameters 23.100
21.260

12448 1980 　 GOST 12448-80 Hydraulic and pneumatic drives and lubricating systems. Nominal volumes 23.100
21.260

12466 1980 　 GOST 12446-80 Hydraulic and pneumatic drives and lubricating systems. Nominal freguecies of rotation 23.100
21.260

12853 1980 　 GOST 12853-80 Positive-displacement hydraulic drives, pneumatic actuators and lubricating systems. Connecting threads 23.100
21.260

13824 1980 　 GOST 13824-80 Positive-displacement hydraulic drives, pneumatic actuators and lubricating systems. Nominal capacity per revolution 23.100
21.260

13825 1980 　 GOST 13825-80 Hydraulic drives and lubricating systems. Nominal flows of liquid 23.100
21.260

14066 1968 　 GOST 14066-68 Filters of hydraulic and lubricating systems. Ranges of basic parameters 23.100.60
21.260

15108 1980 　 GOST 15108-80 Positive-displacement hydraulic drives, pneumatic drives and lubricating systems. Marking, packing, transportation and storage 23.100
21.260

16516 1980 　 GOST 16516-80 Hydraulic and pneumatic drives and lubricating systems. Conventional passages 23.100
21.260

16770 1986 　 GOST 16770-86 Tanks for positive-displacement hydraulic drives and lubrication systems. General technical requirements 23.100.99
21.260

17108 1986 　 GOST 17108-86 Positive-displacement hydraulic drive and lubricating systems. Methods of parameters measurement 23.100
21.260

18138 1972 　 GOST 18138-72 Lubricating piston pumps. Ranges of basic parameters 21.260
23.080

19535 1974 　 GOST 19535-74 Flange joints for hydraulic and lubricating systems. Specifications 23.100
21.260
23.040.60

19853 1974 　 GOST 19853-74 Lubricating plugs. Specifications 21.260

20765 1987 　 GOST 20765-87 Lubricating systems. Terms and definitions 01.040.21
21.260

21976 1976 　 GOST 21976-76 Rotary plate throttling directional control valve. Basic dimensions 23.100
21.260

22976 1978 　 GOST 22976-78 Hydraulic drives, pneumatic actuators and lubricating systems. Acceptance rules 23.100
21.260

27790 1988 　 GOST 27790-88 Slip-in cartridge hydraulic valves mounting dimensions of cavities 23.100
21.260

28988 1991 　 GOST 28988-91 Fluid power systems. Vibration characteristics, vibration tests 21.260
23.100

29010 1991 　 GOST 29010-91 Lubricating systems. Testing methods 21.260

30541 1997 　 GOST 30541-97 Lubrication systems. Lubrication deliverers. General technical requirements and test methods 21.260

Sort Mk 規格番号規格名称(英語) 国際規格分類
( ICSコードの説明 )