| 19 | 
試験注: この分野に含まれる規格は、一般的使用規格に限定される。 注: 分析化学→ 71.040 |
|---|---|
| 19.020 | 試験条件及び手順一般 |
| 19.040 | 環境試験 注: 試験装置を含む。 |
| 19.060 | 機械的試験 注: 試験装置を含む。 注: 金属の機械的試験→ 77.040.10 |
| 19.080 | 電気及び電子的試験 注: 試験装置を含む。 注: 電気的及び磁気的測定装置→ 17.220.20 |
| 19.100 | 非破壊試験 注: 試験装置: 工業用X線及びγ放射線写真、工業用レントゲンフィルム、浸透液探傷検査等を含む。 注: 金属の非破壊試験→ 77.040.20 |
| 19.120 | 粒度分析．篩分け |
| 19.020 | 
試験条件及び手順一般 |
|||
|---|---|---|---|---|
| Sort | Mk | 規格番号 | 規格名称(英語) | 国際規格分類 ( ICSコードの説明 ) |
| 00003-1507 1984 | GOST 3.1507-84 | Unified system for technological documentation. Rules of making documents for tests | 01.110
19.020 |
|
| 00009-514 1999 | GOST 9.514-99 | Unified system of corrosion and ageing protection. Corrosion inhibitors of metals for water systems. Electrochemical method pretective ability evaluation | 25.220
19.020 |
|
| 00009-517 2003 | GOST R 9.517-2003 | Unified system of corrosion and ageing protection. Temporary rust protection of products. Test methods | 19.020
77.060 |
|
| 00009-602 2005 | GOST 9.602-2005 | Unified system of corrosion and ageing protection. Underground constructions. General requirements for corrosion protection | 19.020
77.060 |
|
| 00015-309 1998 | GOST 15.309-98 | System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions | 01.110
19.020 |
|
| 18294 2004 | GOST 18294-2004 | Drinking water. Method for determination of beryllium content | 13.060
19.020 |
|
| 24026 1980 | GOST 24026-80 | Research tests. Experiment planning. Terms and definitions | 01.040.19
19.020 |
|
| 24054 1980 | GOST 24054-80 | Engineering and instrument production items. Leak detection methods. General requirements | 19.020 | |
| 25176 1982 | GOST 25176-82 | Technical diagnostics. Diagnosis, means of motor venicles, tractors, agricultural, construction and road machinery. Classification. General technical requirements | 19.020
43.180 |
|
| 26655 1985 | GOST 26655-85 | Technical diagnostics. Diagnostics of motor vehicles, tractors, construstion and road machines. Pick-ups. General technical requirements | 19.020
43.180 |
|
| 26656 1985 | GOST 26656-85 | Technical diagnostics. Testability. General requirements | 03.120.10
19.020 |
|
| 26790 | GOST 26790-85 | Leak testing technique | 01.040.19
19.020 |
|
| 26883 1986 | GOST 26883-86 | Exposure factors. Terms and definitions | 01.040.19
19.020 |
|
| 27518 | GOST 27518-87 | Diagnostics of items. General reguirements | 19.020 | |
| 30662 1999 | GOST 30662-99 | Rust converters. Methods of tests of paint coatings protective properties | 19.020
87.020 |
|
| 51350 1999 | GOST R 51350-99 | Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 1. General requirements | 19.020
17.220.20 13.260 |
|
| 51860 2002 | GOST R 51860-2002 | Products wear resistance assurance. Evaluation of lubrication materials antiwear properties by "ball - cylinder" method | 75.100
19.020 |
|
| 52180 2003 | GOST R 52180-2003 | Drinking water. Determination of elements content by stripping voltammetric method | 13.060.45
19.020 |
|
| 52181 2003 | GOST R 52181-2003 | Drinking water. Determination of anions content by ion chromatography and capillary electrophoresis methods | 13.060.45
19.020 |
|
| 52379 | GOST R 52379-2005 | Good clinical practice (GCP) | 11.120
19.020 |
|
| 52406 2005 | GOST R 52406-2005 | Water. Determination of oil products using gas chromatography method | 13.060
19.020 |
|
| 52530 2006 | GOST R 52530-2006 | Automotive gasolines. Photocolorimetric method of lron determination | 19.020
75.160.20 |
|
| 52531 2006 | GOST R 52531-2006 | Petroleum distillates. Determination of methyl tertiarybutyl ether chromatography method | 19.020
75.080 |
|
| IEC 61010-002-010 1999 | GOST R IEC 61010-2-010-99 | Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-010. Particular requirements for laboratory equipment for the heating of materials | 19.020
13.260 71.040.10 |
|
| IEC 61010-002-020 1999 | GOST R IEC 61010-2-020-99 | Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-020. Particular requirements for laboratory centrifuges | 19.020
13.260 71.040.10 |
|
| IEC 61010-002-031 1999 | GOST R IEC 61010-2-031-99 | [withdrawn? =>GOST R IEC 61010-031-2005]
Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-031. Particular requirements for hand-held probe assemblies for electrical measurement and test |
19.020
13.260 17.220.20 |
|
| IEC 61010-002-032 1999 | GOST R IEC 61010-2-032-99 | Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for hand-held current clamps for electrical measurement and test | 19.020
13.260 17.220.20 |
|
| IEC 61010-002-051 1999 | GOST R IEC 61010-2-051-99 | Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-051. Particular requirements for laboratory equipment for mixing and stirring | 19.020
13.260 71.040.10 |
|
| IEC 61010-002-061 1999 | GOST R IEC 61010-2-061-99 | Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-061. Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization | 19.020
13.260 17.180.30 |
|
| IEC 61010-031 2005 | GOST R IEC 61010-031-2005 | Safety requirements for electrical equipment for measurement, control and laboratory use. Part 031. Safety requirements for hand-held probe assemblies for electrical measurement and test | 19.020 | |
| ISO 11140-02 2001 | GOST R ISO 11140-2-2001 | Sterilization of health care products. Chemical indicators. Part 2. Test equipment and methods | 11.080
19.020 |
|
| ISO 11644 2002 | GOST ISO 11644-2002 | Leather. Method for determination of adhesion of finish | 59.140.30
19.020 |
|
| ISO 14644-03 2007 | ★ | GOST R ISO 14644-3-2007 | Cleanrooms and associated controlled environments. Part 3. Test methods | 13.040.30
19.020 |
| ISO 14644-04 2002 | GOST R ISO 14644-4-2002 | Cleanrooms and associated controlled environments. Part 4. Design, construction and start-up | 13.040.30
19.020 |
|
| ISO 14644-05 2005 | GOST R ISO 14644-5-2005 | Cleanrooms and associated controlled environments. Part 5. Operations | 13.040.30
19.020 |
|
| ISO 14644-07 2007 | ★ | GOST R ISO 14644-7-2007 | Cleanrooms and associated controlled environments. Part 7. Separative devices (clean air hoods, gloveboxes, isolators and mini-environments) | 13.040.01
19.020 |
| 19.040 |
環境試験 注: 試験装置を含む。 |
|||
| Sort | Mk | 規格番号 | 規格名称(英語) | 国際規格分類 ( ICSコードの説明 ) |
| 00005-2030 1973 | GOST 5.2030-73 | A heat, cold and reduced atmospheric pressure chamber КТХБ-К-0,025 - 65/155. Quality requirements for certified products | 19.040 | |
| 00009-023 1974 | GOST 9.023-74 | Unified system of corrosion and ageing protection. Oil fuels. Method of laboratory testing biostability of fuels protected by antimicrobe additives | 75.160
19.040 |
|
| 00009-024 1974 | GOST 9.024-74 | Unified system of corrosion and ageing protection. Rubbers. Methods of heat ageing stability determination | 83.060
19.040 |
|
| 00009-026 1974 | GOST 9.026-74 | Unified system of corrosion and ageing protection. Vulcanized rubber. Method of accelerated determination to ozone resistance | 83.060
19.040 |
|
| 00009-029 1974 | GOST 9.029-74 | Unified system of corrosion and ageing protection. Vulcanized rubbers. Method of testing of resistance to ageing under static deformation of compression | 83.060
19.040 19.060 |
|
| 00009-030 1974 | GOST 9.030-74 | Unified system of corrosion and ageing protection. Vulcanized rubber. Method of testing resistance to attack by corrosive media in limp state | 83.060
19.040 |
|
| 00009-045 1975 | GOST 9.045-75 | Unified system of corrosion and ageing protection. Paint coatings. Accelerated methods of light-fastness determination | 19.040
87.020 |
|
| 00009-048 1989 | GOST 9.048-89 | Unified system of corrosion and ageing protection. Technical items. Methods of laboratory tests for mould resistance | 19.040 | |
| 00009-049 1991 | GOST 9.049-91 | Unified system of corrosion and ageing protection. Polimer materials and their components. Methods of laboratory tests for mould resistance | 19.040
83.020 |
|
| 00009-050 1975 | GOST 9.050-75 | Unified system of corrosion and ageing protection. Varnish-and-paint coatings. Laboratory test methods to mould resistance | 19.040.
87.020 |
|
| 00009-052 1988 | GOST 9.052-88 | Unified system of corrosion and ageing protection. Oils and greases. Laboratory test methods for mould resistance | 19.040
75.100 |
|
| 00009-053 1975 | GOST 9.053-75 | Unified system of corrosion and ageing protection. Non-metallic materials and articles with their application. Method of microbiological resistance tests under natural and atmospherie conditions | 25.220
19.040 |
|
| 00009-054 1975 | GOST 9.054-75 | Unified system of corrosion and ageing protection. Anticorrosive oils, greases and inhibited film-forming petroleum compounds. Accelerated test methods of protective property | 19.040
75.100 |
|
| 00009-055 1975 | GOST 9.055-75 | Unified system of corrosion and ageing protection. Wool fabric. Laboratory test method for clothes moth damage resistance | 19.040
59.080.30 |
|
| 00009-057 1975 | GOST 9.057-75 | Unified system of corrosion and ageing protection. Polymeric materials, wood, fabrics, paper, cardboard. Method of laboratory testing for thei stability in regards to the deterioration by rodents | 19.040 | |
| 00009-058 1975 | GOST 9.058-75 | Unified system of corrosion and ageing protection. Polymeric materials, wood, fabrics, paper, cardboard. Resistance test methods to damage by termites | 19.040 | |
| 00009-060 1975 | GOST 9.060-75 | Unified system of corrosion and ageing protection. Fabrics. Method of laboratory tests for microbiological destruction stability | 19.040
59.080.30 |
|
| 00009-061 1975 | GOST 9.061-75 | Unified system of corrosion and ageing protection Rubbers. Accelerated test method for resistance to attack by liquid corrosive media during rotation under frictional condition | 83.060
19.040 |
|
| 00009-065 1976 | GOST 9.065-76 | Unified system of corrosion and ageing protection. Rubbers. Test method for liquid corrosive media resistance at the constant tensile stress | 83.060
19.040 |
|
| 00009-066 1976 | GOST 9.066-76 | Unified system of corrosion and ageing protection. Vulcanized rubbers. Method of ageing resistance testing under weather conditions | 83.060
19.040 |
|
| 00009-068 1976 | GOST 9.068-76 | Unified system of corrosion and ageing protection. Sealants. Test methods for resistance to attack by liquid corrosive media | 25.220
19.040 |
|
| 00009-070 1976 | GOST 9.070-76 | Unified system of corrosion and ageing protection. Vulcanized rubbers. Test methods for resistance to attack by liquid corrosive media at static compressive strain | 83.060
19.040 |
|
| 00009-082 1977 | GOST 9.082-77 | Unified protection corrosion and ageing system. Oils and lubricants. Methods of laboratory tests for resistance to bacteria action | 19.040
75.100 |
|
| 00009-085 1978 | GOST 9.085-78 | Unified system of corrosion and ageing protection. Cooling lubricant. Bioresistance test methods | 19.040
75.100 |
|
| 00009-512 1996 | GOST 9.512-96 | Unified system of corrosion and ageing protection. Means of temporary corrosion protection. Method of determining protection ability of lubricants against fretting-corrosion | 75.100
19.040 |
|
| 00009-701 1979 | GOST 9.701-79 | Unified system of corrosion and ageing protection. Vulcanized rubbers. Test method for radiation ageing resistance | 19.040
83.060 |
|
| 00009-703 1979 | GOST 9.703-79 | Unified system of corrosion and ageing protection. Plastic materials for items, used in tropical conditions. General requirements for selection and test methods | 83.080
19.040 |
|
| 00009-704 1980 | GOST 9.704-80 | Unified system of corrosion and ageing protection. Vulcanized rubbers. Methods of determination of the packing parts for the fixed joints working capacity during the radiation-thermal ageing | 83.060
19.040 |
|
| 00009-706 1981 | GOST 9.706-81 | Unified system of corrosion and ageing protection. Polimer materials. Test methods for radiation ageing resistance | 19.040
83.020 |
|
| 00009-707 1981 | GOST 9.707-81 | Unified system of corrosion and ageing protection. Polymeric materials. Methods of accelerated climatic ageing test | 19.040
83.020 |
|
| 00009-708 1983 | GOST 9.708-83 | Unified system of corrosion and ageing protection. Plastics. Ageing test methods on exposure to natural and artificial climatic factors | 19.040
83.080 |
|
| 00009-709 1983 | GOST 9.709-83 | Unified system of corrosion and ageing protection. Cellular rubbers. Accelerated test method for thermal ageing resistance | 19.040
83.060 |
|
| 00009-713 1986 | GOST 9.713-86 | Unified system of corrosion and ageing protection. Vulcanized rubbers. Method of predicting the change of properties buring heat ageing | 19.040
83.060 |
|
| 00009-715 1986 | GOST 9.715-86 | Unified system of corrosion and ageing protection. Polymeric materials. Test methods for temperature shock resistance | 19.040
83.020 |
|
| 00009-716 1991 | GOST 9.716-91 | Unified system of corrosion and ageing protection. Polymeric materials. Methods of determining variation of plasticizer content with ageing | 83.020
19.040 |
|
| 00009-718 1993 | GOST 9.718-93 | Unified syitem of corrosion and ageing protection. Polymeric materials. Antioxidant protective efficiency determining method | 83.020
19.040 |
|
| 00009-719 1994 | GOST 9.719-94 | Unified system of corrosion and ageing protection. Polymeric materials. Methods of ageing tests under the influence of moist heat, aqueous and salt spray | 19.040
83.020 |
|
| 00009-801 1982 | GOST 9.801-82 | Unified system of corrosion and ageing protection. Paper. Test methods by fungus resistance | 19.040
85.060 |
|
| 00009-802 1984 | GOST 9.802-84 | Unified system of corrosion and ageing protection. Textiles and products of natural, artificial, synthetic fibres and its mixtures. Test method for fungous resistance | 59.080.30
19.040 |
|
| 00009-902 1981 | GOST 9.902-81 | Unified system of corrosion and ageing protection. Polymeric materials. Accelerated test methods for corrosivity | 83.020
19.040 |
|
| 00009-905 1982 | GOST 9.905-82 | Unified system of corrosion and ageing protection. Corrosion test methods. General requirements | 77.060
19.040 |
|
| 00009-906 1983 | GOST 9.906-83 | Unified system of corrosion and ageing protection. Test climatic stations. General requirements | 19.040
77.060 |
|
| 00009-909 1986 | GOST 9.909-86 | Unified system of corrosion and ageing protection. Metals, alloys, metal and non-metal inorganic coatings. Test methods at climatic test stations | 19.040
77.060 |
|
| 11478 1988 | GOST 11478-88 | Electronic consumer equipment. Norms and methods of climatic and environmental mechanical testing procedured | 19.040
33.160 19.060 |
|
| 15152 1969 | GOST 15152-69 | Unified system of corrosion and ageing pretection. Industrial rubber products for tropics. General requirements | 19.040
83.140 |
|
| 18956 1973 | GOST 18956-73 | Rolling roof materials. Aging under artifical climatic factors. Gest methods | 91.100.50
19.040 |
|
| 21964 1976 | GOST 21964-76 | Environmental factors. Nomenclature and characteristics | 01.040.19
19.040 |
|
| 23750 1979 | GOST 23750-79 | Artifikal weather apparatus with xenon emitters. General technical requirements | 19.040 | |
| 24813 1981 | GOST 24813-81 | Testing of items the point of view of influence on climatic factors. General | 19.040 | |
| 25051-02 1982 | GOST 25051.2-82 | The state system of testing products. Test chambers of heat and cold. Certification methods | 19.040 | |
| 28199 1989 | GOST 28199-89 | Basic environmental, testing procedures. Part 2. Tests. Test A: Cold | 19.040
31.020 |
|
| 28200 1989 | GOST 28200-89 | Basic environmental testing procedures. Part 2. Tests. Tests B: Dry heat | 19.040
31.020 |
|
| 28201 1989 | GOST 28201-89 | Basic environmental testing procedures. Part 2: Tests. Test Ca: Damp heat, steady state | 19.040
31.020 |
|
| 28202 1989 | GOST 28202-89 | Basic environmental testing. Part 2. Tests. Test Sa: Simulated solar radiation at ground level | 19.040
31.020 |
|
| 28203 1989 | GOST 28203-89 | Basic environmental testing procedures. Part 2. Tests. Test Fc and Guidance: Vibration ( sinusoidal ) | 19.040
31.020 |
|
| 28204 1989 | GOST 28204-89 | Basic environmental testing procedures. Part 2. Tests. Test Ga and Guidance: Acceleration, steady state | 19.040
31.020 |
|
| 28205 1989 | GOST 28205-89 | Basic environmental testing procedures. Part 2: Tests. Guidance for solar radiation testing | 19.040
31.020 |
|
| 28206 1989 | GOST 28206-89 | Basic environmental testing procedures. Part 2. Tests. Test J. And Guidance: Mould growth | 19.040
31.020 |
|
| 28207 1989 | GOST 28207-89 | Basic environmental testing procedures. Part 2. Tests. Test Ka: Salt mist | 19.040
31.020 |
|
| 28208 1989 | GOST 28208-89 | Basic environmental testing procedures. Part 2. Tests. Test M: Low air pressure | 31.020
19.040 |
|
| 28209 1989 | GOST 28209-89 | Basic environmental testing procedures part 2: tests. Test N: Change of temperature | 19.040
31.020 |
|
| 28210 1989 | GOST 28210-89 | Basic environmental testing procedures. Part 2. Test Q: Sealing | 19.040
31.020 |
|
| 28211 1989 | GOST 28211-89 | Basic environmental testing procedures. Part 2. Tests. Test T: Soldering | 19.040
31.020 |
|
| 28212 1989 | GOST 28212-89 | Basic environmental testing procedures. Part 2. Tests. Test U: Robustens of terminations and integral mounting devices | 19.040
31.020 |
|
| 28213 1989 | GOST 28213-89 | Basic environmental testing prosedures. Part 2. Tests. Test Ea and guidance: Shock | 19.040
31.020 19.060 |
|
| 28214 1989 | GOST 28214-89 | Basic environmental testing procedures. Part 2: Tests guidance for damp heat tests | 19.040
31.020 |
|
| 28215 1989 | GOST 28215-89 | Basic environmental testing procedures. Part 2: Tests. Test Eb and guidance: Bump | 19.040
31.020 |
|
| 28216 1989 | GOST 28216-89 | Basic environmental testing procedures. Part 2: Tests. Test Db and guidance: damp heat, cyclic ( 12 + 12 hour cycle) | 19.040
31.020 |
|
| 28217 1989 | GOST 28217-89 | Basic environmental testing. Part 2. Tests. Test Ec: Drop and Topple, primarily for equipment-type specimens | 19.040
31.020 19.060 |
|
| 28218 1989 | GOST 28218-89 | Basic environmental testing procedures. Part 2. Tests. Test Ed: Free fall | 19.040
31.020 |
|
| 28219 1989 | GOST 28219-89 | Basic environmental testing procedures. Part 2: Tests. Guidance on change of temperature tests | 19.040
31.020 |
|
| 28220 1989 | GOST 28220-89 | Basic environmental testing procedures. Part 2. Tests. Test Fd: Random vibration wide band. General requirements | 19.040
31.020 19.060 |
|
| 28221 1989 | GOST 28221-89 | Basic environmental testing procedures. Part 2. Tests. Test Fda: Random vibration wide band - reproducibility high | 19.040
31.020 19.060 |
|
| 28222 1989 | GOST 28222-89 | Basic environmental testing procedures. Part 2. Tests. Test Fdb: Random vibration wide band - reproducibility medium | 19.040
31.020 |
|
| 28223 1989 | GOST 28223-89 | Basic environmental testing procedures. Part 2. Tests. Test Fde : Random vibration wide band - reproducibility low | 19.040
31.020 |
|
| 28224 1989 | GOST 28224-89 | Basic environmental testing procedures. Part 2. Test Z/AD: Composite temperature and humidity cyclic test | 19.040
31.020 |
|
| 28225 1989 | GOST 28225-89 | Basic environmental testing procedures. Part 2: Tests. Test Z/AMD : Combined sequential cold, low air pressure and damp heat test | 19.040
31.020 |
|
| 28226 1989 | GOST 28226-89 | Basic environmental testing procedures. Part 2. Tests. Test Kc: Sulphur dioxide test for contacts and connections | 19.040
31.020 |
|
| 28227 1989 | GOST 28227-89 | Basic environmental testing procedures. Part 2. Tests. Test Kd: Hidrogen sulphide test for contacts and connections | 19.040
31.020 |
|
| 28228 1989 | GOST 28228-89 | Basic environmental testing procedures. Part 2. Tests. Guidance on test T: Soldering | 19.040
31.020 |
|
| 28229 1989 | GOST 28229-89 | Basic environmental testing procedures. Part 2. Tests. Test XA and guidance. Immersion in cleaning solvents | 19.040
31.020 |
|
| 28230 1989 | GOST 28230-89 | Basic environmental testing procedures. Part 2: Tests. Guidance to test Kd: Hydrogen sulphide test for contacts and connections | 19.040
31.020 |
|
| 28231 1989 | GOST 28231-89 | Basic environmental testing procedures. Part 2. Tests. Mounting of components, equipment and other articles for dinamic tests including shock (Ea), bump (Eb), vibration (Fc and Fd) and steady-state acceleration (Ga) and guidance | 19.040
31.020 19.060 |
|
| 28232 1989 | GOST 28232-89 | Basic environmental testing procedures. Part 2. Tests. Guidance on the application of the tests of IEC publication 68 to semulate the effects of storage | 31.020
19.040 |
|
| 28233 1989 | GOST 28233-89 | Basic environmental testing procedures. Part 2. Tests. Guidance to test Kc: Sulphur dioxide test for contact and connections | 31.020
19.040 |
|
| 28234 1989 | GOST 28234-89 | Basic environmental testing procedures. Part2. Tests. Test Kb: Salt mist, cyclic ( sodium chloride solution) | 19.040
31.020 |
|
| 28235 1989 | GOST 28235-89 | Basic environmental testing procedures. Part 2. Tests. Test Ta: Soldering. Solderability testing by the wetting balance method | 19.040
31.020 25.160.50 |
|
| 28236 1989 | GOST 28236-89 | Basic environmental testing procedures. Part 3. Background information. Cold and dry heat tests | 19.040
31.020 |
|
| 28237 1989 | GOST 28237-89 | Test enclosures of non-injection type for constant relative humidity | 19.040 | |
| 28574 1990 | GOST 28574-90 | Corrosion protection in construction. Concrete and reinforced concrete constructions. Methods of the protection covers adhesion testing | 91.080.40
19.040 25.220 |
|
| 28575 1990 | GOST 28575-90 | Corrosion protection in construction. Concrete and reinforced concrete constructions. Test of protection covers from steam penetration | 91.080.40
19.040 |
|
| 30630-00-00 1999 | GOST 30630.0.0-99 | Environment stabilty test methods for machines, instruments and other industrial products. General requirements | 19.060
19.040 |
|
| 30631 1999 | GOST 30631-99 | General requirements for machines, instruments and other industrial products as to environment mechanical stability | 19.040
19.060 |
|
| 50109 1992 | GOST R 50109-92 | Nonmetallic materials. Test method for mass loss and content of volatile condensable materials in a vacuum-thermal environment | 19.040 | |
| 51368 1999 | GOST R 51368-99 | Climatic environment stability test methods for machines, instruments and other industrial products. Test for stability influence of temperature | 19.040 | |
| 51369 1999 | GOST R 51369-99 | Climatic environment stability test methods machines, instruments and other industrial products. Test for influence of humidity | 19.040 | |
| 51370 1999 | GOST R 51370-99 | Climatic environment stability test methods for machines, instruments and other industrial products. Test for influence of solar radiation | 19.040 | |
| 51371 1999 | GOST R 51371-99 | Mechanical environment stability test methods for machines, instruments and other industrial products. Test for influence of shocks | 19.040
19.060 |
|
| 51372 1999 | GOST R 51372-99 | Accelerated life and storable life tests methods in special aggresive and other special medias for technical products, matherial and sistems of matherials. General | 19.040
01.120 |
|
| 51502 1999 | GOST R 51502-99 | Environmental dynamic testing for machines, instruments and other articles. Exposure to broad-band random vibration (digital control) | 17.160
19.060 19.040 |
|
| 51684 2000 | GOST R 51684-2000 | Climatic environment stability test methods of machines, instruments and other industrial products. Test for low air pressure | 19.040 | |
| 51801 2001 | GOST R 51801-2001 | General requirements for machines, instruments and other industrial products as to aggressive and other special media stability | 19.040
01.120 |
|
| 51802 2001 | GOST R 51802-2001 | Aggressive and other special media stability test methods for machines, instruments and other industrial products | 19.040
01.120 |
|
| 51804 2001 | GOST R 51804-2001 | Environment, stability test methods for machines, instruments and other industrial products. Combined tests | 19.040
19.060 |
|
| 51909 2002 | GOST R 51909-2002 | Environment stability test methods for machines, instruments and other industrial products. Tests for transportation and storage | 21.020
19.040 |
|
| 51910 2002 | GOST R 51910-2002 | Research and testing strategy by accelerated methods of environmental conditions influence for industrial products longevity and storage ability. Development and design | 01.120
19.040 |
|
| 52763 2007 | ★ | GOST R 52763-2007 | Сlimatic environment stability test methods for machines, instruments and other industrial products. Tests for exposure to salt mist | 19.040 |
| 19.060 |
機械的試験 注: 試験装置を含む。 注: 金属の機械的試験→ 77.040.10 |
|||
| Sort | Mk | 規格番号 | 規格名称(英語) | 国際規格分類 ( ICSコードの説明 ) |
| 00004-179 1985 | GOST 4.179-85 | System of product-quality indices. Machines and instruments for measuring forces and strains. Nomenclature of indices | 03.120
19.060 |
|
| 00004-403 1985 | GOST 4.403-85 | Product-quality index system. Machines and instruments for determining mechanical properties of materials. Index nomenclature | 03.120
19.060 |
|
| 00005-1948 1973 | GOST 5.1948-73 | Mechanical vibration stand ВУ-15М. Quality requirements for certified products | 19.060 | |
| 00008-0044 1980 | GOST 8.044-80 | State system for ensuring the uniformity of measurements. Diamond indentors of the hardness testing machines for metal and alloys. Verification methods and means | 19.060
17.020 |
|
| 00008-0062 1985 | GOST 8.062-85 | State system for ensuring the uniformity of measurements. State special standart and state verification schedule for measuring means of hardness on Brinell scales | 17.020
19.060 |
|
| 00008-0063 1979 | ★ | GOST 8.063-79 | [withdrawn]
State system for ensuring the uniformity of measurements. State special standard and the all-union verification schedule for means measuring of hardness on Vickers scales |
19.060
17.020 |
| 00008-0136 1974 | GOST 8.136-74 | State system for ensuring the uniformity of measurements. Hydraulic presses for testing building materials. Verification methods and means | 17.060
19.060 |
|
| 00008-0335 1978 | GOST 8.335-78 | [withdrawn]
State system for ensuring the uniformity of measurements. Haroness standard blocks. Methods and means of verification |
17.020
19.060 |
|
| 00008-0398 1980 | GOST 8.398-80 | State system for ensuring the uniformity of measurements. Hardness testing machines for metals and alloys. Methods and means of verification | 17.020
19.060 |
|
| 00008-0406 1980 | GOST 8.406-80 | State system for ensuring the uniformity of measurements. Hardness testing machines for rubber. Verification methods and means | 17.020
19.060 |
|
| 00008-0426 1981 | GOST 8.426-81 | State system for ensuring the uniformity of measurements. Shere rebound hardness testing machines. Methods and means of verification | 17.020
19.060 |
|
| 00008-0509 1984 | GOST 8.509-84 | State system for ensuring the uniformity of measurements. Long-term strength and creep testing machines. Calibration methods | 17.020
19.060 |
|
| 00009-029 1974 | GOST 9.029-74 | Unified system of corrosion and ageing protection. Vulcanized rubbers. Method of testing of resistance to ageing under static deformation of compression | 83.060
19.040 19.060 |
|
| 00023-201 1978 | GOST 23.201-78 | Products wear resistance assurance. Gas abrasive wear testing of materials and coatings with centrifugal accelarator | 19.060
03.120.10 |
|
| 00023-204 1978 | GOST 23.204-78 | Products wear resistance assurance. A method of asessment of the surface wearing ability in friction | 19.060
03.120.10 |
|
| 00023-205 1979 | GOST 23.205-79 | Products wear resistance assurance. Accelerated life tests by inquiry method | 19.060
03.120.10 |
|
| 00023-207 1979 | GOST 23.207-79 | Ensuring of wear resistance of products. Testing of engineering, materials for impact abrasive wear | 19.060 | |
| 00023-208 1979 | GOST 23.208-79 | Ensuring of wear resistance of products. Wear resistance testing of materials by friction against loosely fixed abrasive particles | 19.060
03.120.10 |
|
| 00023-211 1980 | GOST 23.211-80 | Products wear resistance assuring. Testing of materials for wear under fretting and fretting-corrosion conditions | 19.060
03.120.10 |
|
| 00023-212 1982 | GOST 23.212-82 | Products wear resistanse assurance. The method of testing materials for wear under shock under law temperature conditions | 19.060
03.120.10 |
|
| 00023-213 1983 | GOST 23.213-83 | Product wear resistance assurance. Evaluation of scoring preventive properties of engineering materials | 19.060
03.120.10 |
|
| 00023-216 1984 | GOST 23.216-84 | Ensuring of wear resistance of products. Method of testing materials for wear and friction applying oil-refrigerant mixtures as lubricants | 03.120.10
19.060 |
|
| 00023-218 1984 | GOST 23.218-84 | Ensuring of wear resistance of products. Determination of energy-consumption while plastic deformation of materials | 03.120.10
19.060 |
|
| 00023-219 1984 | GOST 23.219-84 | Products wear resistance assurance. Test method for wear resistance of materials and details with hydroerosion wearing by dispersed particles | 03.120.10
19.060 |
|
| 00023-220 1984 | GOST 23.220-84 | Products wear resistance assurance. Evaluation method of abrasive ability of reestablished shafts surfaces | 19.060
03.120.10 |
|
| 00023-221 1984 | GOST 23.221-84 | Products weak resistance assurance. Experemental evaluation of lubricants temperature stability at friction | 19.060
03.120.10 |
|
| 00023-223 1985 | GOST 23.223-85 | [withdrawn]
Products wear resistance assurance. Method for determination of tribotechnical properties of construction materials in contact with fibrous material |
03.120.10
19.060 |
|
| 00023-223 1997 | GOST 23.223-97 | Ensuring of wear resistance of products. Method for determination of tribotechnical properties of constructuon materials in contact with fibrous material | 03.120
19.060 |
|
| 00023-224 1986 | GOST 23.224-86 | Products wear resistance assurance. Reestablished machine parts. Experimental evaluation of wear resistance ability | 19.060
03.120.10 |
|
| 00023-301 1978 | GOST 23.301-78 | Products wear resistance assurance. Instruments for evaluating wear by the method of cut notches. Technical requirements | 19.060
03.120.10 |
|
| 00025-001 1978 | GOST 25.001-78 | Desing calculations and strength testing in machinebuilding. Standards, technical documentation and manuals. General regulations | 03.120.01
19.060 |
|
| 00025-101 1983 | GOST 25.101-83 | Strength calculation and testing. Representation of random loading of machine elements and structures and statistical evaluation of results | 19.060
03.120.30 |
|
| 00025-504 1982 | GOST 25.504-82 | System calculation and testing. Methods of fatigue strength behaviaur calculation | 19.060 | |
| 00025-507 1985 | GOST 25.507-85 | Strength calculation and testinig in machine building. Method of fatigue testing under service loading. General requirements | 19.060 | |
| 00025-601 1980 | GOST 25.601-80 | Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for tensile properties on plane specimens at normal, elevated and law temperatures | 19.060 | |
| 00025-602 1980 | GOST 25.602-80 | Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for compression properties at normal, elevated and low temperature | 19.060 | |
| 00025-603 1982 | GOST 25.603-82 | Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for tensile properties of ring specimens at normal, elevated and low temperatures | 19.060 | |
| 00025-604 1982 | GOST 25.604-82 | Design calculation and strength. Testings. Methods of mechanical testing of polymeric composite materials. Test for bending properties at normal, elevated and low temperatures | 19.060 | |
| 09031 1975 | GOST 9031-75 | Standardized blocks of hardness. Specifications | 19.060
17.020 |
|
| 09500 1984 | GOST 9500-84 | Standard dynamometers portable. General specifications | 19.060
17.100 |
|
| 10708 1982 | GOST 10708-82 | Pendulum impactors. Specifications | 17.060
19.060 |
|
| 11478 1988 | GOST 11478-88 | Electronic consumer equipment. Norms and methods of climatic and environmental mechanical testing procedured | 19.040
33.160 19.060 |
|
| 13837 | GOST 13837-79 | General-purpose dynamometers. Specifications | 19.060
17.100 |
|
| 14766 1969 | GOST 14766-69 | Machines and apparatus for determination of mechanical properties of materials. Terms and definitions | 01.040.19
19.060 |
|
| 16844 1986 | GOST 16844-86 | [withdrawn]
Technical requipments for mechanical hammers |
19.060
17.160 25.140 |
|
| 16844 1993 | GOST 16844-93 | Vibration. Requirements for testing mechanical hammers | 17.160
19.060 |
|
| 18957 1973 | GOST 18957-73 | Tensometers for measurements of linear deformations of building materials and structures. General technical requirements | 19.060 | |
| 21318 1975 | GOST 21318-75 | Measurement of microhardness by scratch diamond instruments | 19.060 | |
| 21616 1991 | GOST 21616-91 | Strain gauges. General specifications | 19.060 | |
| 23677 1979 | GOST 23677-79 | Hardness testing machines for metals. General technical requirements | 19.060 | |
| 24812 1981 | GOST 24812-81 | Testing of items from the point of view of influence on mechanical factors. General | 19.060 | |
| 25051-03 1983 | GOST 25051.3-83 | Vibration testing equipment. Methodic of verification | 19.060 | |
| 25051-04 1983 | GOST 25051.4-83 | Electrodynamic vibration testing equipment. General specifications | 17.160
19.060 |
|
| 25864 1983 | GOST 25864-83 | Force measuring standard machines of 2 grade. General technical requirements | 19.060
17.100 |
|
| 26446 1985 | GOST 26446-85 | Brazed and soldered joints. Methods of fatigue testing | 25.160.50
19.060 |
|
| 27609 1988 | GOST 27609-88 | Calculations and strength tests in mechanical engineering. General regulations and requirements for carring out calculations and tests and for standards | 19.060 | |
| 27860 1988 | GOST 27860-88 | Machine parts. Measurement of wear | 19.060 | |
| 28213 1989 | GOST 28213-89 | Basic environmental testing prosedures. Part 2. Tests. Test Ea and guidance: Shock | 19.040
31.020 19.060 |
|
| 28217 1989 | GOST 28217-89 | Basic environmental testing. Part 2. Tests. Test Ec: Drop and Topple, primarily for equipment-type specimens | 19.040
31.020 19.060 |
|
| 28220 1989 | GOST 28220-89 | Basic environmental testing procedures. Part 2. Tests. Test Fd: Random vibration wide band. General requirements | 19.040
31.020 19.060 |
|
| 28221 1989 | GOST 28221-89 | Basic environmental testing procedures. Part 2. Tests. Test Fda: Random vibration wide band - reproducibility high | 19.040
31.020 19.060 |
|
| 28231 1989 | GOST 28231-89 | Basic environmental testing procedures. Part 2. Tests. Mounting of components, equipment and other articles for dinamic tests including shock (Ea), bump (Eb), vibration (Fc and Fd) and steady-state acceleration (Ga) and guidance | 19.040
31.020 19.060 |
|
| 28836 1990 | GOST 28836-90 | Strain gauge load cells. General technical requirements and testings methods | 19.060
17.100 |
|
| 28840 1990 | GOST 28840-90 | Mashines tension, press and bending materials. General technical requirements | 19.060 | |
| 28841 1990 | GOST 28841-90 | Mashines for fatigue testing of materials. General technical requirements | 19.060 | |
| 28845 1990 | GOST 28845-90 | Machines for long time strength creep, testing and relaxation of materials. General technical requirements | 19.060 | |
| 30479 1997 | GOST 30479-97 | Ensuring of wear resistance of products. Methods assesment of limiting wear. Principles of provision. General | 03.120.10
19.060 |
|
| 30480 1997 | GOST 30480-97 | Ensuring of wear resistance of products. Methods assays wear resistance. Principles of provision. General | 03.120.10
19.060 |
|
| 30630-00-00 1999 | GOST 30630.0.0-99 | Environment stabilty test methods for machines, instruments and other industrial products. General requirements | 19.060
19.040 |
|
| 30630-01-01 1999 | GOST 30630.1.1-99 | Mechanical environment stability test methods for machines, instruments and other industrial products. Determination of dynamic characteristics of structure | 19.060 | |
| 30630-01-02 1999 | GOST 30630.1.2-99 | Mechanical environment stability test methods for machines, instruments and other industrial products. Tests for influences of vibration | 19.060 | |
| 30631 1999 | GOST 30631-99 | General requirements for machines, instruments and other industrial products as to environment mechanical stability | 19.040
19.060 |
|
| 30814 2002 | GOST 30814-2002 | Knitted fabrics and outerwear for grown-ups. Physical hygienic indices | 19.060 | |
| 50740 | GOST R 50740-95 | Thribotechnical requirements and indexes. Principles of provision. General | 19.060 | |
| 51371 1999 | GOST R 51371-99 | Mechanical environment stability test methods for machines, instruments and other industrial products. Test for influence of shocks | 19.040
19.060 |
|
| 51502 1999 | GOST R 51502-99 | Environmental dynamic testing for machines, instruments and other articles. Exposure to broad-band random vibration (digital control) | 17.160
19.060 19.040 |
|
| 51804 2001 | GOST R 51804-2001 | Environment, stability test methods for machines, instruments and other industrial products. Combined tests | 19.040
19.060 |
|
| 51805 2001 | GOST R 51805-2001 | Mechanical environment stability test methods for machines, instruments and other industrial products. Tests for influences of acceleration steady state | 19.060 | |
| 52862 2007 | ★ | GOST R 52862-2007 | Mechanical environment stability test methods for machines, instruments and other industrial products. Test methods for acoustic noise (vibration, acoustic component) | 19.060 |
| ISO 02960 1999 | GOST R ISO 2960-99 | Textiles. Determination of bursting strength and bursting distension by diaphragm method | 19.060 | |
| ISO 03759 1999 | ★ | GOST R ISO 3759-99 | [withdrawn]
Textiles. Preparation, marking and measuring of fabric speciments and garments in tests for determination of dimensional change |
59.080.30
61.020 19.060 |
| ISO 05077 1999 | ★ | GOST R ISO 5077-99 | [withdrawn]
Textiles. Method for determination of dimensional change in washing and drying |
59.080.30
19.060 |
| ISO 06330 1999 | GOST R ISO 6330-99 | Textiles. Domestic washing and drying procedures for textile testing | 19.060
59.080.30 61.020 |
|
| ISO 09237 1999 | GOST R ISO 9237-99 | Textiles. Determination of the permeability of fabrics to air | 19.060
59.080.30 |
|
| ISO 10528 1999 | GOST R ISO 10528-99 | Textiles. Commercial laundering procedure for textile fabrics prior to flammability testing | 59.080.30
19.060 |
|
| 19.080 |
電気及び電子的試験 注: 試験装置を含む。 注: 電気的及び磁気的測定装置→ 17.220.20 |
|||
| Sort | Mk | 規格番号 | 規格名称(英語) | 国際規格分類 ( ICSコードの説明 ) |
| 00012-03-019 1980 | GOST 12.3.019-80 | Occupational safety standards system. Electrical tests and measurements. General safety requirements | 13.100
19.080 17.220 |
|
| 51911 2002 | GOST R 51911-2002 | Mechanical environment stability test methods for machines, instruments and other industrial products. Bending, torn, tensile and compression tests of electrical terminals, fittings and other parts being connecting up | 19.080 | |
| 19.100 |
非破壊試験 注: 試験装置: 工業用X線及びγ放射線写真、工業用レントゲンフィルム、浸透液探傷検査等を含む。 注: 金属の非破壊試験→ 77.040.20 |
|||
| Sort | Mk | 規格番号 | 規格名称(英語) | 国際規格分類 ( ICSコードの説明 ) |
| 00004-177 1985 | GOST 4.177-85 | Product-quality index system. Nondectructive testing instruments. Nomenclature of indices | 03.120
19.100 |
|
| 00004-198 1985 | GOST 4.198-85 | System of product-quality indices. X-ray analytical apparatus. Nomenclature of indices | 03.120
19.100 |
|
| 00008-0283 1978 | GOST 8.283-78 | State system for ensuring the uniformity of measurements. Electromagnet flaw detector. Methods and means of verification | 19.100
17.020 |
|
| 00012-02-051 1980 | GOST 12.2.051-80 | Occupational safety standards system. Technological ultrasonic equipment. Safety requirements | 13.100
19.100 |
|
| 08490 1977 | GOST 8490-77 | X-ray tube. General specifications | 19.100
11.040.50 |
|
| 15843 1979 | GOST 15843-79 | Accessories for industrial radiography. Main dimensions | 19.100 | |
| 16865 1979 | GOST 16865-79 | X-ray apparatus for structural and spectral analysis. Terms and definitions | 01.040.19
19.100 |
|
| 17064 1971 | GOST 17064-71 | The main functional assemblies, the accessories and the auxiliary devices of gamma-apparatuses. Terms and definitions | 01.040.19
19.100 01.040.11 11.040.50 |
|
| 18353 | GOST 18353-79 | Nondestructive check. Classification of types and methods | 19.100 | |
| 18442 1980 | GOST 18442-80 | Nondestructive testing. Capillary methods. General requirements | 19.100 | |
| 19647 1974 | GOST 19647-74 | Methods and means of radioisotope Х-ray analysis. Terms and definitions | 01.040.19
19.100 |
|
| 20337 1974 | GOST 20337-74 | X-ray devices. Terms and definitions | 01.040.19
19.100 01.040.11 11.040.50 |
|
| 20911 1989 | GOST 20911-89 | Technical diagnostics. Terms and definitions | 01.040.19
19.100 |
|
| 21104 1975 | GOST 21104-75 | Non-destructive testing. Ferrosonde method | 19.100 | |
| 21105 1987 | GOST 21105-87 | Nondestructive testing. Method of magnetic particle testing | 19.100 | |
| 21397 1981 | GOST 21397-81 | Non-destructive testing. Set of standard samples for ultrasonic testing semi-finished and aluminium alloy products. Specifications | 19.100 | |
| 22091-00 1984 | GOST 22091.0-84 | X-ray devices . General requirements for measuring of parameters | 19.100 | |
| 22091-01 1984 | GOST 22091.1-84 | X-ray devices. The methods of measuring of heater current and heater voltage | 19.100 | |
| 22091-02 1984 | GOST 22091.2-84 | X-ray devices. The methods of measuring of the current and the voltage of injection of X-ray betatrons | 19.100 | |
| 22091-03 1984 | GOST 22091.3-84 | X-ray devices. Methods of measuring radiation field and beam angle of X-radiation | 19.100 | |
| 22091-04 1986 | GOST 22091.4-86 | X-ray devices. The methods of measuring of the voltage of X-ray tube | 19.100 | |
| 22091-05 1986 | GOST 22091.5-86 | X-ray devices. The methods of measuring X-ray tube current | 19.100 | |
| 22091-06 1984 | GOST 22091.6-84 | X-ray devices. Methods of measuring X-radiation exposure dose power and X-radiation exposure dose per pulse | 19.100 | |
| 22091-07 1984 | GOST 22091.7-84 | X-ray devices. The methods of the measuring of the uniformity of the distribution of the energe flyx density of the X-ray over the X-ray coverage | 19.100 | |
| 22091-08 1984 | GOST 22091.8-84 | X-ray devices. Method of measuring spectral structure and relative spectrum contamination | 19.100 | |
| 22091-09 1986 | GOST 22091.9-86 | X-ray devices. The methods of measuring effective focus spot size | 19.100 | |
| 22091-10 1984 | GOST 22091.10-84 | X-ray devices. The method of measuring AL(CU) equivalent of X-ray device envelope | 19.100 | |
| 22091-11 1980 | GOST 22091.11-80 | X-ray devices. The method of the measuring of the time operation readiness of the device | 19.100 | |
| 22091-12 1984 | GOST 22091.12-84 | X-ray devices. The methods of measuring of currents and electrode voltage per pulse | 19.100 | |
| 22091-13 1984 | GOST 22091.13-84 | X-ray devices. The method of measuring of grid-cathode capacity | 19.100 | |
| 22091-14 1986 | GOST 22091.14-86 | X-ray devices. The method of measuring the energy flow density (photon flux density) of X-radiation | 19.100 | |
| 22091-15 1986 | GOST 22091.15-86 | X-ray devices. The method of electric strenght test | 19.100 | |
| 23197 1978 | GOST 23197-78 | X-ray acceleration cameras. General specifications | 19.100
11.040.50 |
|
| 23479 1979 | GOST 23479-79 | Non-destructive testing. Optic methods. General requirements | 19.100 | |
| 23480 1979 | GOST 23480-79 | Non-destructive testing. Radio wave methods. General requirements | 19.100 | |
| 23483 1979 | GOST 23483-79 | Non-destructive testing. Thermal methods. General requirements | 19.100 | |
| 23667 1985 | GOST 23667-85 | Non-destructive testing. Ultrasonic flaw detectors. Methods of measuring the main parameters | 19.100 | |
| 23702 1990 | GOST 23702-90 | Non-destructive testing. Ultrasonic transducers. Test methods | 19.100 | |
| 23764 1979 | GOST 23764-79 | Gamma-defectoscopes. General technical specifications | 19.100 | |
| 24034 1980 | GOST 24034-80 | Radiation nondestructive testing. Terms and definitions | 01.040.19
19.100 |
|
| 24289 1980 | GOST 24289-80 | Eddy current nondestructive testing. Terms and definitions | 01.040.19
19.100 |
|
| 24450 1980 | GOST 24450-80 | Magnetic non-destructive inspection. Terms and definitions | 01.040.19
19.100 |
|
| 24521 1980 | GOST 24521-80 | Optical non-destructive inspection. Terms and definitions | 01.040.19
19.100 |
|
| 24522 1980 | GOST 24522-80 | Cepillary non-destructive inspetion. Terms and definitions | 01.040.19
19.100 |
|
| 24925 1981 | GOST 24925-81 | Technical diagnostics. Tractors. Diagnosis adaptability. General technical requirements | 19.100
43.180 65.060.10 |
|
| 25113 1986 | GOST 25113-86 | Non-destructive testing x-ray apparatus for industrial flam detection. General specifications | 19.100 | |
| 25313 1982 | GOST 25313-82 | Radiowave non-destructive testing. Terms and definitions | 01.040.19
19.100 |
|
| 25314 1982 | GOST 25314-82 | Thermal non-destructive testing. Terms and definitions | 01.040.19
19.100 |
|
| 25315 1982 | GOST 25315-82 | Electric non-destructive testing. Terms and definitions | 01.040.19
19.100 |
|
| 25714 1983 | GOST 25714-83 | Non-destructive control. Acoustic sound method of open porosity, apparent density, density and compression strength tests of refractory articles | 81.080
19.100 |
|
| 26114 1984 | GOST 26114-84 | Non-destructive testing. Flow detection equipment on the basic of particle accelerators. Main parameters and general technical requirements | 19.100 | |
| 26140 1984 | GOST 26140-84 | X-ray medical apparatus. General specifications | 11.040.50
19.100 |
|
| 26170 1984 | GOST 26170-84 | Non-destructive testing. Radio wave apparatus. General technical requirements | 19.100 | |
| 26182 | GOST 26182-84 | Non-destructive testing. Fluorescent method of leak testing | 19.100 | |
| 26266 1990 | GOST 26266-90 | Non-destructive testing. Ultrasonic transducers. General technical requirements | 19.100 | |
| 27333 1987 | GOST 27333-87 | Nondestructive testing. Measurement of electrical conductivity of nonferrous metals by eddy current method | 77.040.20
19.100 |
|
| 27750 1988 | GOST 27750-88 | Restoring coatings. Coating thickness control methods | 19.100 | |
| 27947 1988 | GOST 27947-88 | Nondestructive testing. Tv radiographic method. General requirements | 19.100 | |
| 28369 1989 | GOST 28369-89 | Non-destructive testing. Ultraviolet sources. General technical requirements and test methods | 19.100 | |
| 28517 1990 | GOST 28517-90 | Nondestructive testing. Mass-spectrometer method of leak testing. General requirements | 19.100 | |
| 28702 1990 | GOST 28702-90 | Non-destructive testing. Ultrasonic thickness gauges. General technical requirements | 19.100 | |
| 29025 1991 | GOST 29025-91 | Non-destructive testing. X-ray television flaw detectors with X-ray electronic optical transducers electric radiographic flaw detectors. General technical requirements | 19.100 | |
| 30703 2001 | GOST 30703-2001 | Non-destructive testing. Safety measures for leakage testing. General requirements | 19.100
13.100 |
|
| 51532 1999 | GOST R 51532-99 | Protective devices against diagnostic medical X-radiation. Part 1. Determination of attenuation properties of materials | 11.040.50
19.100 |
|
| 51534 1999 | GOST R 51534-99 | Protective devices against diagnostic medical X-radiation. Part 3. Protective clothing and protectives for gonads | 11.040.50
19.100 |
|
| 51751 2001 | GOST R 51751-2001 | Non-destructive testing. Non-destructive testing for evaluation of critical high-loaded elements when exposed to significant temperature and forces. General requirements for guidance of the selection of methods | 19.100 | |
| 51780 2001 | GOST R 51780-2001 | Nondestructive testing. Methods and means for leakage testing. Procedure and criteria of selection | 19.100 | |
| 51817 2001 | GOST R 51817-2001 | Evaluation and routine testing in medical imaging departments. Part 2-5. Constancy tests. Image display devices | 11.040.50
19.100 |
|
| 51818 2001 | GOST R 51818-2001 | Evaluation and routine testing in medical imaging departments. Part 2-3. Constancy tests. Darkroom safelight conditions | 19.100 | |
| IEC 60526 2001 | GOST R IEC 60526-2001 | High-voltage cable plug and socket connections for medical X-ray equipment | 11.040.50
29.120.20 19.100 |
|
| IEC 61223-02-01 2001 | GOST R IEC 61223-2-1-2001 | Evaluation and routine testing in medical imaging departments. Part 2-1. Constancy tests. Film processors | 11.040.50
19.100 |
|
| IEC 61223-02-02 2001 | GOST R IEC 61223-2-2-2001 | Evaluation and routine testing in medical imaging departments. Part 2-2. Сonstancy tests. Radiographic cassettes and film changers. Film-screen contact and relative sensitivity of the screen-cassette assembly | 19.100 | |
| IEC 61223-02-04 2001 | GOST R IEC 61223-2-4-2001 | Evaluation and routine testing in medical imaging departments. Part 2-4. Сonstancy tests. Hard copy cameras | 19.100 | |
| IEC 61223-02-06 2001 | GOST R IEC 61223-2-6-2001 | Evaluation and routine testing in medical imaging departments. Part 2-6. Constancy tests. X-ray equipment for computed tomography | 11.040.50
19.100 |
|
| IEC 61223-02-07 2001 | GOST R IEC 61223-2-7-2001 | Evaluation and routine testing in medical imaging departments. Part 2-7. Constancy tests. Equipment for intra-oral dental radiography | 11.040.50
19.100 |
|
| IEC 61223-02-09 2001 | GOST R IEC 61223-2-9-2001 | Evaluation and routine testing in medical imaging departments. Part 2-9. Constancy tests. Equipment for indirect radioscopy and indirect radiography | 11.040.50
19.100 |
|
| IEC 61223-02-10 2001 | GOST R IEC 61223-2-10-2001 | Evaluation and routine testing in medical imaging departments. Part 2-10. Constancy tests. X-ray equipment for mammography | 11.040.50
19.100 |
|
| IEC 61223-02-11 2001 | GOST R IEC 61223-2-11-2001 | Evaluation and routine testing in medical imaging departments. Part 2-11. Constancy tests. Equipment for general direct radiography | 11.040.50
19.100 |
|
| IEC 61223-03-01 2001 | GOST R IEC 61223-3-1-2001 | Evaluation and routine testing in medical imaging departments. Part 3-1. Imaging performance of X-ray equipment for radiographic and radioscopic systems. Acceptance tests | 19.100
11.040.50 |
|
| IEC 61223-03-02 2001 | GOST R IEC 61223-3-2-2001 | Evaluation and routine testing in medical imaging departments. Part 3-2. Imaging performance of mammographic X-ray equipment. Acceptance tests | 19.100 | |
| IEC 61223-03-04 2001 | GOST R IEC 61223-3-4-2001 | Evaluation and routine testing in medical imaging departments. Part 3-4. Imaging performance of dental X-ray equipment. Acceptance tests | 11.040.50
19.100 |
|
| IEC 61267 2001 | GOST R IEC 61267-2001 | Medical diagnostic X-ray equipment. Radiation conditions for use in the determination of characteristics | 11.040.50
19.100 |
|
| IEC 61674 2006 | GOST R IEC 61674-2006 | Medical electrical equipment. Dosimeters with ionization chambers and/or semi-conductor detectors as used in X-ray diagnostic imaging | 19.100 | |
| IEC 61675-01 2006 | GOST R IEC 61675-1-2006 | Radionuclide imaging devices. Characteristics and test conditions. Part 1. Positron emission tomographs | 19.100 | |
| IEC 61675-02 2006 | GOST R IEC 61675-2-2006 | Radionuclide imaging devices. Characteristics and test conditions. Part 2. Single photon emission computed tomographs | 19.100 | |
| IEC 61675-03 2006 | GOST R IEC 61675-3-2006 | Radionuclide imaging devices. Characteristics and test conditions. Part 3. Gamma camera based wholebody imaging systems | 19.100 | |
| IEC 61953 2001 | GOST R IEC 61953-2001 | Diagnostic X-ray imaging equipment. Characteristics of mammographic anti-scatter grids | 19.100
11.040.50 |
|
| ISO 03665 2006 | GOST R ISO 3665-2006 | Photography. Intra-oral dental radiographic films. Technical requirements | 19.100 | |
| ISO 04090 2006 | GOST R ISO 4090-2006 | Photography. Medical radiographic cassettes/screens/films and hard-copy imaging films. Dimensions and technical requirements | 19.100 | |
| ISO 10124 1999 | GOST R ISO 10124-99 | Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes. Ultrasonic testing for the detection of laminar imperfections | 19.100
23.040.10 |
|
| ISO 10332 1999 | GOST R ISO 10332-99 | Seamless and welded ( except submerged arc-welded) steel tubes for pressure purposes. Ultrasonic testing for the verification of hydraulic leak-tightness | 23.040.10
19.100 |
|
| ISO 10543 1999 | GOST R ISO 10543-99 | Seamless and hot-stretch-reduced welded steel tubes for pressure purposes. Ultrasonic thickness testing | 23.040.10
19.100 |
|
| 19.120 |
粒度分析．篩分け |
|||
| Sort | Mk | 規格番号 | 規格名称(英語) | 国際規格分類 ( ICSコードの説明 ) |
| 51568 1999 | GOST R 51568-99 | Test sieves of metal wire cloth. Specifications | 19.120 | |
| ISO 05223 1999 | GOST R ISO 5223-99 | Test sieves for cereals. Technical requirements | 19.120 | |
| Sort | Mk | 規格番号 | 規格名称(英語) | 国際規格分類 ( ICSコードの説明 ) |
ご意見、ご要望、ご質問 はお気軽に