| 17 | 
度量衡及び測定、物理的現象 |
|---|---|
| 17.020 | 度量衡及び測定一般 注: 測定器全般に関する問題、標準数、標準計量等を含む。 |
| 17.040 | 線及び角度の測定 |
| 17.060 | 体積、質量、密度、粘度の測定 注: 測定器を含む 注: 石油製品及び天然ガスの計量→ 75.180.30 |
| 17.080 | 時間、速度、加速度、角速度の測定 注: 測定器を含む 注: 時間測定器→ 39.040 |
| 17.100 | 力、重さ及び圧力の測定 注: 測定器を含む |
| 17.120 | 流量の測定 注: 測定器及び設備を含む。 |
| 17.140 | 音響及び音響測定 注: 測定器及び試験装置を含む。 注: 騒音(環境問題)→ 13.140 注: 建物における音響問題→ 91.120.20 |
| 17.160 | 振動、衝撃及び振動の測定 注: 振動及びショック(環境問題)→ 13.160 注: 釣り合い及び釣合試験機→ 21.120.40 注: 建物の振動防護→ 91.120.25 |
| 17.180 | 光学及び光学的測定 |
| 17.200 | 熱力学及び温度測定 |
| 17.220 | 電気学．磁気学．電気的及び磁気的測定 |
| 17.240 | 放射線測定 注: 放射線防護→ 13.280 |
| 17.020 | 
度量衡及び測定一般 注: 測定器全般に関する問題、標準数、標準計量等を含む。 |
|||
|---|---|---|---|---|
| Sort | Mk | 規格番号 | 規格名称(英語) | 国際規格分類 ( ICSコードの説明 ) |
| 00001-11 1999 | GOST R 1.11-99 | State system for standardization of Russian Federation. Metrological expert evaluation of state standards projects | 01.120
17.020 |
|
| 00001-25 1976 | GOST 1.25-76 | State system of standardization. Metrological assurance. General | 01.120
17.020 |
|
| 00008-0000 2000 | GOST R 8.000-2000 | State system for ensuring the uniformity of measurements. Basic principles | 17.020 | |
| 00008-0008 1972 | GOST 8.008-72 | State system for ensuring the uniformity of measurements. Methods and means for verification of indicating and recording pneumatic control instruments | 17.020 | |
| 00008-0009 1984 | GOST 8.009-84 | State system for ensuring the uniformity of measurements. Standardized metrological characteristic of measuring instruments | 17.020 | |
| 00008-0016 1981 | GOST 8.016-81 | State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means measuring plane angle | 17.040.30
17.020 |
|
| 00008-0018 1982 | ★ | GOST 8.018-82 | [withdrawn]
State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means measuring temperature coefficient of linear expansion in the range from 90 to 1800 K |
17.020 |
| 00008-0018 2008 | ★ | GOST 8.018-2007 | State system for ensuring the uniformity of measurements. State verification schedule for means of LTEC measurements of solid substances in temperature range from 90 to 1800 K | 17.020 |
| 00008-0019 1985 | GOST 8.019-85 | State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means measuring electrical capacity and tangent loss angle | 17.020 | |
| 00008-0021 2005 | GOST 8.021-2005 | State system for ensuring the uniformity of measurements. State verification schedule for mass measuring instruments | 17.020 | |
| 00008-0024 2002 | GOST 8.024-2002 | State system for ensuring the uniformity of measurements. State verification schedule for means of measuring density | 17.020 | |
| 00008-0027 2001 | GOST 8.027-2001 | State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of direct electrical vortage and electromotive force | 17.020
17.220.20 |
|
| 00008-0044 1980 | GOST 8.044-80 | State system for ensuring the uniformity of measurements. Diamond indentors of the hardness testing machines for metal and alloys. Verification methods and means | 19.060
17.020 |
|
| 00008-0057 1980 | GOST 8.057-80 | State system of ensuring the uniformity of measurements. Procedure of acceptance, maintenance and use of standards and standard measuring means | 17.020 | |
| 00008-0061 1980 | GOST 8.061-80 | State system for ensuring the uniformity of measurements. Verification schedules. Scope and layont | 17.020 | |
| 00008-0062 1985 | GOST 8.062-85 | State system for ensuring the uniformity of measurements. State special standart and state verification schedule for measuring means of hardness on Brinell scales | 17.020
19.060 |
|
| 00008-0063 1979 | ★ | GOST 8.063-79 | [withdrawn]
State system for ensuring the uniformity of measurements. State special standard and the all-union verification schedule for means measuring of hardness on Vickers scales |
19.060
17.020 |
| 00008-0063 2007 | ★ | GOST 8.063-2007 | State system for ensuring the uniformity of measurements. State verification schedule for means measuring the metals and alloys hardness on Vickers scales | 17.020 |
| 00008-0064 1994 | GOST 8.064-94 | State system for ensuring the uniformity of measurements. State verification shedule for means measuring of hardness on Rockwell and Super-Rockwell scales | 17.020 | |
| 00008-0087 1981 | GOST 8.087-81 | State system for ensuring the uniformity of measurements. Dosimetriс set-ups for calibrating photon and electron radiation. Methods and means of calibration | 17.240
17.020 |
|
| 00008-0089 1973 | GOST 8.089-73 | State system for ensuring the uniformity of measurements. Spherometers. Verification methods and means | 17.040.30
17.020 |
|
| 00008-0099 1973 | GOST 8.099-73 | State system for ensuring the uniformity of measurement. Cludicating hole gauges graduated in 0,01mm. Methods and means of verification | 17.040.30
17.020 |
|
| 00008-0106 2001 | GOST 8.106-2001 | State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring the radiance and radiant intensity of heat sources within temperature range of 220 - 1360 K | 17.020 | |
| 00008-0109 1997 | GOST 8.109-97 | State system for ensuring the uniformity of measurements. State verification schedule for means measuring the amplitude modulation factor of high frequency oscillations | 17.020
33.140 |
|
| 00008-0110 1997 | GOST 8.110-97 | State system for ensuring the uniformity of measurements. State verification schedule for means measuring the distortion coefficient | 17.020
33.140 |
|
| 00008-0113 1985 | GOST 8.113-85 | State system for ensuring the uniformity of measurements. Vernier callipers. Verification methods | 17.040.30
17.020 |
|
| 00008-0114 1974 | GOST 8.114-74 | State system for ensuring the uniformity of measurements. Vertical optical length comparators. Methods an means of verification | 17.040.30
17.020 |
|
| 00008-0120 1983 | GOST 8.120-83 | State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means measuring pH | 71.040.30
17.020 |
|
| 00008-0120 1999 | GOST 8.120-99 | State system for ensuring the uniformity of measurement. State verification schedule for means measuring pH | 17.020
71.040.30 |
|
| 00008-0122 1985 | GOST 8.122-85 | State system for ensuring the uniformity of measurements. Rotameters. Methods of verifications | 17.120.10
17.020 |
|
| 00008-0122 1999 | GOST 8.122-99 | State system for ensuring the uniformity of measurements. Rotameters. Methods of verification | 17.020 | |
| 00008-0134 1974 | GOST 8.134-74 | PH scale for aqueous solutions | 71.040.30
17.020 |
|
| 00008-0135 2004 | GOST 8.135-2004 | Interstate system for ensuring the uniformity of measurements. Weight amouhts of the standard materials for preparation of the buffer solutions - operational pH standards of 2-nd and 3-rd classes. The technical and the metrological characteristics. Methods of them determination | 17.020 | |
| 00008-0147 1975 | GOST 8.147-75 | State system for ensuring the uniformity of measurements. Measurement tool СЦ type for gear whell runout. Verification methods and means | 17.040.30
17.020 |
|
| 00008-0163 1975 | GOST 8.163-75 | State system for ensuring the uniformity of measurement. Depth gauges | 17.040.30
17.020 |
|
| 00008-0164 1975 | GOST 8.164-75 | State system for ensuring the uniformity of measurements. Vernier height gauges. Methods and means for verification | 17.040.30
17.020 |
|
| 00008-0165 1975 | GOST 8.165-75 | State system ensuring the uniformity of measurement. Sine bars. Methods and means for verification | 17.040.30
17.020 |
|
| 00008-0181 1976 | GOST 8.181-76 | State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring of evolvent surfaces's parameters | 17.040.30
17.020 |
|
| 00008-0182 1976 | GOST 8.182-76 | State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring spectrum parameters of electronic paramagnetic resonance | 17.020
33.140 |
|
| 00008-0197 2005 | GOST 8.197-2005 | State system for ensuring the uniformity of measurements. State verification scheme for instruments measuring of the spectral radiance in spectral range from 0,04 to 0,25 мюm | 17.020 | |
| 00008-0206 1976 | GOST 8.206-76 | State system for ensuring the uniformity of measurements. The measuring pulse generators. Methods and means for verification | 17.020
33.140 |
|
| 00008-0207 1976 | GOST 8.207-76 | State system for ensuring the uniformity of measurements. Direct measurements with multiple observations. Methods of processing the results of observations. Basic principles | 17.020 | |
| 00008-0211 1984 | GOST 8.211-84 | State system for ensuring the uniformity of measurements. Ocular screw micrometer. Methods and means of verification | 17.040.30
17.020 |
|
| 00008-0213 1976 | GOST 8.213-76 | State system for ensuring the uniformity of measurements. Glass electrodes for measuring the ion activity of sodium and potassium. Methods and means of verification | 71.040.10
17.020 |
|
| 00008-0217 2003 | GOST 8.217-2003 | State system for ensuring the uniformity of measurements.Сurrent transformers. Verification procedure | 17.020 | |
| 00008-0221 1976 | GOST 8.221-76 | State system of ensuring the uniformity of measurements. Humidimetry and hydrometry. Terms and definitions | 01.040.17
17.020 |
|
| 00008-0237 2003 | GOST 8.237-2003 | State system for ensuring the uniformity of measurements. Single-value electrical resistance measures. Verification procedure | 17.020 | |
| 00008-0247 2004 | GOST 8.247-2004 | State system for ensuring the uniformity of measurements. Meyer stick for oil product level measuring in horisontal tanks. Calibration methods | 17.020 | |
| 00008-0254 1977 | GOST 8.254-77 | State system for ensuring the uniformity of meanurements. Measuring receivers. Methods and means for verification in frequency range from 1 to 37,5 GHz | 17.020
33.140 |
|
| 00008-0255 2003 | GOST 8.255-2003 | State system for ensuring the uniformity of measurements. Electrical capacity measures. Verification procedure | 17.020 | |
| 00008-0256 1977 | GOST 8.256-77 | State system for ensuring the uniformity of measurements. Standardization and determination of dynamic characteristics of analogue measuring instruments. Basic principles | 17.020 | |
| 00008-0258 1977 | GOST 8.258-77 | State system for ensuring the uniformity of measurements. Polarimeters and saccharimeters. Methods and means of calibration | 17.020 | |
| 00008-0259 2004 | GOST 8.259-2004 | State system for ensuring the uniformity of measurements. Electrical induction active and reactive energy meters. Methods of verification | 17.020 | |
| 00008-0269 1977 | GOST 8.269-77 | State system for ensuring the uniformity of measurements. Measuring glass burettes for chemical non-automatic gas analyzers. Methods and means of verification | 17.020
71.040.10 |
|
| 00008-0274 1985 | GOST 8.274-85 | State system for ensuring the uniformaty of measurements. State special standard and state verification schedule for means of measuring complex permittivity and complex permeability as well as reflection factor modulus at frequencies of 0,2 - 1,0 GHz | 17.020
33.140 |
|
| 00008-0275 2007 | ★ | GOST 8.275-2007 | State system for ensuring the uniformity of measurements. State verification schedule for means measuring the lasеr output average power and laser pulse energy within the wavelength range from 0,3 to 12,0 m | 17.020 |
| 00008-0283 1978 | GOST 8.283-78 | State system for ensuring the uniformity of measurements. Electromagnet flaw detector. Methods and means of verification | 19.100
17.020 |
|
| 00008-0310 1990 | GOST 8.310-90 | State system for ensuring the uniformity of measurements. State system of standard reference data. Basic statements | 17.020 | |
| 00008-0314 1978 | GOST 8.314-78 | State system for ensuring the uniformity of measurements. Low-frequency generators. Methods and means of verification | 17.020
33.140 |
|
| 00008-0315 1991 | GOST 8.315-91 | State system for ensuring the uniformity of measuring. Reference materials. Basic principles, ways of development, certification, approval, registration and use | 17.020 | |
| 00008-0322 1978 | GOST 8.322-78 | State system for ensuring the uniformity of measurements. Measuring signal generators. Methods and means for verification within the range of 0.03-17.44 GHz | 17.020
33.140 |
|
| 00008-0323 1978 | GOST 8.323-78 | State system of ensuring the unity of measurements. Standard time and frequency signals radiated by specialized radio stations of the state time service. Main parameters | 17.020 | |
| 00008-0324 2002 | GOST 8.324-2002 | State system for ensuring the uniformity of measurements. Gas meters. Calibration methods | 17.020 | |
| 00008-0331 1978 | GOST 8.331-78 | State system for ensuring the uniformity of measurements. Non-linear distortion meters. Methods and means of verification | 17.020
33.140 |
|
| 00008-0331 1999 | GOST 8.331-99 | State system for ensuring the uniformity of measurement. Distortion meters. Methods and means of verification and calibration | 17.220
33.140 17.020 |
|
| 00008-0334 1978 | GOST 8.334-78 | State system for ensuring the uniformity of measurements. Noise figure meters of UHF transistors and receivers. Methods and means of verification | 17.020
33.100 |
|
| 00008-0335 1978 | GOST 8.335-78 | [withdrawn]
State system for ensuring the uniformity of measurements. Haroness standard blocks. Methods and means of verification |
17.020
19.060 |
|
| 00008-0335 2004 | GOST 8.335-2004 | State system for ensuring the uniformity of measurements. Hardness standard blocks. Methods of verification | 17.020 | |
| 00008-0338 2002 | GOST 8.338-2002 | State system for ensuring the uniformity of measurements. Thermoelectric transducers. Verification procedure | 17.020 | |
| 00008-0346 2000 | GOST 8.346-2000 | State system for ensuring the uniformity of measurements. Steel hoisontal cylindric tanks. Calibration methods | 17.020
75.180.30 |
|
| 00008-0354 1985 | GOST 8.354-85 | State system for ensuring the uniformity of measurements. Conductometric liquid analysers. Methods of verification | 71.040.10
17.020 |
|
| 00008-0372 1980 | GOST 8.372-80 | State system for ensuring the uniformity of measurements. Standards of the units for physical quantitie. The ways of development, approval, registration, maintenance and use | 17.020 | |
| 00008-0381 1980 | GOST 8.381-80 | State system for ensuring the uniformity of measurements. Standards. The ways of expressing the errors | 17.020 | |
| 00008-0394 1980 | GOST 8.394-80 | State system for ensuring the uniformity of measurements Q-0272-2 second order of accuracy quality factor standard measures. Methods and means of verification | 17.020 | |
| 00008-0395 1980 | GOST 8.395-80 | State system for ensuring the uniformity of measurements. Reference conditions of measurements while calibrating. General requirements | 17.020 | |
| 00008-0398 1980 | GOST 8.398-80 | State system for ensuring the uniformity of measurements. Hardness testing machines for metals and alloys. Methods and means of verification | 17.020
19.060 |
|
| 00008-0401 1980 | GOST 8.401-80 | State system for ensuring the uniformity of measurements. Accuracy classes of measuring instruments. General requirements | 17.020 | |
| 00008-0406 1980 | GOST 8.406-80 | State system for ensuring the uniformity of measurements. Hardness testing machines for rubber. Verification methods and means | 17.020
19.060 |
|
| 00008-0417 1981 | GOST 8.417-81 | State system of ensuring the uniformity of measurements. Units of physical quantities | 17.020
01.060 |
|
| 00008-0417 2002 | GOST 8.417-2002 | State system for ensuring the uniformity of measurements. Units of quantities | 17.020 | |
| 00008-0420 2002 | GOST 8.420-2002 | State system for ensuring the uniformity of measurements. State verification schedule for means of measuring straightness and flatness deviation | 17.020
17.040 |
|
| 00008-0426 1981 | GOST 8.426-81 | State system for ensuring the uniformity of measurements. Shere rebound hardness testing machines. Methods and means of verification | 17.020
19.060 |
|
| 00008-0430 1988 | GOST 8.430-88 | State system for ensuring the uniformity of measurements. Symbols for units of physical quantities to be used inprinting devices with a limited set of signs | 17.020
01.060 |
|
| 00008-0432 1981 | GOST 8.432-81 | State system for ensuring the uniformity of measurements. Grain and products of processing method of carrying out measurements of moisture on model vacuum thermal set | 17.020 | |
| 00008-0434 1981 | GOST 8.434-81 | State system for ensuring the uniformity of measurements. Humidity of grain and its processing products. Method of carrying out measurements by dielcometric and resistive moistureganges | 17.020 | |
| 00008-0435 1981 | GOST 8.435-81 | State system for ensuring the uniformity of measurements. Neasuring set line building-out networks. Methods and means for checking | 17.020 | |
| 00008-0436 1981 | GOST 8.436-81 | State system for ensuring the uniformity of measurements. Measuring sets power supply bridges. Methods and means for checking | 17.220.20
17.020 |
|
| 00008-0441 1981 | GOST 8.441-81 | State system of ensuring the unity of measurements. Actual high precision measures of frequency and time. Methods and means of verification | 17.080
17.020 |
|
| 00008-0442 1981 | GOST 8.442-81 | State system for ensuring the uniformity of measurements. Moisture meters neutron. Methods and means of verification | 17.020 | |
| 00008-0443 1981 | GOST 8.443-81 | State system of ensuring the uniformity of measurements. Standard instruments for monopulse and modulated puls laser radiation peak power measurements. Methods and means for verification | 17.240
17.020 |
|
| 00008-0444 1981 | GOST 8.444-81 | State system of ensuring the uniformity of measurements. Standard instruments for dynamic parameter measurements of puls laser measuring transducers. Methods and means for verification | 17.240
17.020 |
|
| 00008-0445 1981 | GOST 8.445-81 | State system for ensuring the uniformity of measurements. Standard means mesuring laser output average power. Methods and means for verification | 17.240
17.020 |
|
| 00008-0457 2000 | GOST 8.457-2000 | State system for ensuring the uniformity of measurements. State verification schedule for means of measuring specific conductivity of liguids | 17.020
17.220.20 |
|
| 00008-0465 1982 | GOST 8.465-82 | State system of ensuring the unity of measurements. Actial frequencу of limited accuracy. Methods and means of verification | 17.020 | |
| 00008-0469 2002 | GOST 8.469-2002 | State system for ensuring the uniformity of measurements. Automatic continuous proportional weighers. Methods and means of verification | 17.020
17.060 |
|
| 00008-0480 1982 | GOST 8.480-82 | State system for ensuring the uniformity of measurements. State verification schedule for means of measuring moisture of grain and grain products | 17.020 | |
| 00008-0485 1983 | GOST 8.485-83 | State system for ensuring the uniformity of measurements. Analitical gas laboratory chromatographs. Methods and means of verification | 17.020
71.040.10 |
|
| 00008-0489 1983 | GOST 8.489-83 | State system for ensuring the uniformity of measurements. Metrological assurance of analytical works with agrichemical objects. General | 17.020 | |
| 00008-0492 1983 | GOST 8.492-83 | State system for ensuring the uniformity of measurements. Actual low precision of frequency. Methods and means of verification | 17.020 | |
| 00008-0508 1984 | GOST 8.508-84 | State system for ensuring the uniformity of measurements. Metrological characteristics of measurements means and precision characteristics of automation means. General methods of estimate and control | 17.020 | |
| 00008-0509 1984 | GOST 8.509-84 | State system for ensuring the uniformity of measurements. Long-term strength and creep testing machines. Calibration methods | 17.020
19.060 |
|
| 00008-0510 2002 | GOST 8.510-2002 | State system for ensuring the uniformity of measurements. State verification schedule for means measuring volume and mass of liquid | 17.020 | |
| 00008-0512 1984 | GOST 8.512-84 | State system for ensuring the uniformity of measurements. State verification schedule for means measuring humidity of non-aqueous liquids | 17.020 | |
| 00008-0516 1984 | GOST 8.516-84 | State system for ensuring the uniformity of measurments. State verification schedule for means of metal hardness testing on Shore scale D | 17.020 | |
| 00008-0516 2001 | GOST 8.516-2001 | State system for ensuring the uniformity of measurements. State verification schedule for means measuring hardness of metals according on Shore D hardness scale | 17.020 | |
| 00008-0518 1984 | GOST 8.518-84 | State system for ensuring the uniformity of measurements. Ferritometers for austenite steel. Methods of verification | 17.020
77.080.20 |
|
| 00008-0519 1984 | GOST 8.519-84 | State system for ensuring the uniformity of measurements. Dielcometric moisture meters for construction materials. Calibration methods | 17.020 | |
| 00008-0523 2004 | GOST 8.523-2004 | State system for ensuring the uniformity of measurements. Gravimetric filling instruments. Verification procedure | 17.020 | |
| 00008-0524 1985 | GOST 8.524-85 | State system for ensuring the uniformity of measurements. Psychrometric tables. Constitution, content, calculating correlations | 17.020 | |
| 00008-0525 1985 | GOST 8.525-85 | State system for ensuring the uniformity of measurements. Installations of the highest accuracy for the reproduction of physical quantity units. Order of development, certification, registration, storage and application | 17.020 | |
| 00008-0530 1985 | GOST 8.530-85 | State system for ensuring the uniformity of measurements. Blast-furnace coke humidity. Techniques of measurements by neutron moisture meters | 17.020 | |
| 00008-0531 2002 | GOST 8.531-2002 | State system for ensuring the uniformity of measurements. Reference materials of composition of solid and disperse materials. Ways of homogeneity assessment | 17.020 | |
| 00008-0532 1985 | GOST 8.532-85 | State system for ensuring the uniformity of measurements. Certified reference materials of composition of substances and materials. Procedure for interlaboratory certification | 03.120.20
17.020 |
|
| 00008-0532 2002 | GOST 8.532-2002 | State system for ensuring the uniformity of measurements. Certified reference materials of composition of substances and materials. Interlaboratory metrological certification. Content and order of works | 17.020 | |
| 00008-0547 1986 | GOST 8.547-86 | State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means measuring relative humidity of gases | 17.020 | |
| 00008-0548 1986 | GOST 8.548-86 | State system for ensuring the uniformity of measurements. Clock-type dial indicators graduated in unit divisions of 0,01mm. Procedure of verification | 17.040.30
17.020 |
|
| 00008-0552 2001 | GOST 8.552-2001 | State system for ensuring the uniformity of measurements. State verification scheme for instruments measuring the radiant flux and irradiance in spectral range from 0.03 to 0.40 mcm | 17.020 | |
| 00008-0553 1988 | GOST 8.553-88 | State system for ensuring the uniformity of measurements. Electronic octave and third-octave filters. Methods and means of calibration | 17.020
31.160 |
|
| 00008-0556 1991 | GOST 8.556-91 | State system for ensuring the uniformity of measurements. Methods of determination of waters samples composition and properties. General riquirements for development | 17.020
13.060 |
|
| 00008-0559 1994 | GOST R 8.559-94 | State system for ensuring the uniformity of measurements. Measuring lasers. Method for verification | 31.260
17.020 |
|
| 00008-0561 1995 | GOST R 8.561-95 | State system of ensuring the uniformity of measurements. Metrological ensuring of bank technologies. General principles | 17.020
35.240.40 |
|
| 00008-0562 1997 | ★ | GOST 8.562-97 | [withdrawn]
State system for ensuring the uniformity of measurements. State verification schedule for means measuring seismic displacement, seismic velocity, seismic acceleration over the frequency range from 0,01-20 Hz |
17.020
07.060 |
| 00008-0562 2007 | ★ | GOST R 8.562-2007 | State system for ensuring the uniformity of measurements. State verification schedule for means measuring the power and voltage of electromagnetic waves | 17.020 |
| 00008-0563 1996 | GOST R 8.563-96 | State system for ensuring the uniformity of measurements. Procedures of measurements | 17.020 | |
| 00008-0565 1996 | GOST R 8.565-96 | State system for ensuring the uniformity of measurements. Metrological ensuring of atomic power stations exploitation. General principles | 17.020
27.120.20 |
|
| 00008-0565 1999 | GOST 8.565-99 | State system for ensuring the uniformity of measurements. Order of setting up and correcting calibration intervals for standards | 17.020 | |
| 00008-0566 1999 | GOST 8.566-99 | Staty system for ensuring the uniformity of measurements. Interstate data system on physical constants and properties of substances and materials. General statesments | 17.020 | |
| 00008-0568 1997 | GOST R 8.568-97 | State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles | 03.120.20
17.020 |
|
| 00008-0568 1999 | GOST 8.568-99 | State system for ensuring the uniformity of measurements. Standard platinum resistance thermometers of the first and second grades. Methods of calibration | 17.020 | |
| 00008-0570 2000 | GOST 8.570-2000 | State system for ensuring the uniformity of measurements. Steel vertical cylindric tanks. Calibration methods | 17.020
75.180.30 |
|
| 00008-0571 1998 | GOST R 8.571-98 | State system for ensuring the uniformity of measurements. Standard platinum resistance thermometers of the first and second grades. Methods of calibration | 17.020 | |
| 00008-0576 2001 | GOST 8.576-2001 | State system for ensuring the uniformity of measurements. State verification schedule for means measuring flux, flux density and fluence of electrons, energy flux, energy flux density and fluence of energy of electrons and bremsstrahlung radiation | 17.020 | |
| 00008-0578 2002 | GOST 8.578-2002 | State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring the content of components in gaseous media | 17.020 | |
| 00008-0579 2001 | GOST R 8.579-2001 | State system for ensuring the uniformity of measurements. Requirements established for the quantity of prepackaged goods in packages of any kind during their manufacturing, packaging, selling or importing | 17.020 | |
| 00008-0579 2002 | GOST 8.579-2002 | State system for ensuring the uniformity of measurements. Requirements established for the quantity of prepackaged goods in packages of any kind during their manufacturing, packaging, selling or importing | 17.020 | |
| 00008-0580 2001 | GOST R 8.580-2001 | State system for ensuring the uniformity of measurements. Determination and application of precision data in relation to petroleum products tests methods | 17.020 | |
| 00008-0581 2001 | GOST R 8.581-2001 | State system for ensuring the uniformity of measurements. Air-heat installations for measuring moisture of cereals and cereal products. Verification procedure | 17.020 | |
| 00008-0581 2003 | GOST 8.581-2003 | State system for ensuring the uniformity of measurements. Standard radiometric sources of alpha-radiation. Verification procedure | 17.020 | |
| 00008-0582 2001 | GOST R 8.582-2001 | State system for ensuring the uniformity of measurements. NMR-analyzers for determination of oiliness and moisture of agricultural materials. Verification procedures | 17.020 | |
| 00008-0582 2003 | GOST 8.582-2003 | State system for ensuring the uniformity of measurements. Standard radiometric sources of beta-radiation. Verification procedure | 17.020 | |
| 00008-0583 2001 | GOST R 8.583-2001 | State system for ensuring the uniformity of measurements. Medical ultrasonic therapeutic equipment. General requirements for measurement procedures of the acoustic output performance in the frequency range from 0,5 MHz to 5,0 MHz | 17.020
11.040.60 |
|
| 00008-0584 2004 | GOST 8.584-2004 | State system for ensuring the uniformity of measurements. Alternating current static meters for active energy. Methods of verification | 17.020 | |
| 00008-0585 2001 | GOST R 8.585-2001 | State system for ensuring the uniformity of measurements. Thermocouples. Nominal static characteristics of conversion | 17.020 | |
| 00008-0585 2005 | GOST 8.585-2005 | State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of length and time of propagation in fiber, average power, attenuation and wavelength for system of fider-optic transmission and of data transmission | 17.020 | |
| 00008-0586 2001 | GOST R 8.586-2001 | State system for ensuring the uniformity of measurements. Instruments measuring the characteristics of artificial and natural radiation for the safety of museum exhibits. Methods for verification | 17.020
17.240 |
|
| 00008-0587 2001 | GOST R 8.587-2001 | State system for ensuring the uniformity of measurements. Instruments measuring the characteristics of optical radiation of solar simulators. Methods for verification | 17.020
17.240 |
|
| 00008-0588 2001 | GOST R 8.588-2001 | State system for ensuring the uniformity of measurements. Ultraviolet radiometers for ozone monitoring. Methods for verification | 17.020
17.240 |
|
| 00008-0589 2001 | GOST R 8.589-2001 | State system for ensuring the uniformity of measurements. Control of nature environment soiling. Metrological ensuring. General principles | 17.020
13.020 |
|
| 00008-0590 2001 | GOST R 8.590-2001 | State system for ensuring the uniformity of measurements. Instruments measuring the characteristics of ultraviolet radiation in labour safety. Methods for verification | 17.020
17.240 |
|
| 00008-0591 2002 | GOST R 8.591-2002 | State system for ensuring the uniformity of measurements. Two channel heat meters for water heat supply systems. Standardization of admitted error limits in measurements of the used thermal energy by users | 17.020
17.200.10 |
|
| 00008-0592 2002 | GOST R 8.592-2002 | State system for ensuring the uniformity of measurements. Thermal energy, received by users in water heat supply system. Typical procedure of measurements | 17.200.10
27.010 17.020 |
|
| 00008-0593 2002 | GOST R 8.593-2002 | State system for ensuring the uniformity of measurements. Infrared analysers of grain and forage. Verification procedure | 17.020
17.180.30 |
|
| 00008-0594 2002 | GOST R 8.594-2002 | State system for ensuring the uniformity of measurements. The metrological ensuring of radiation control. General principles | 17.020
17.240 |
|
| 00008-0595 2002 | GOST R 8.595-2002 | [withdrawn => GOST R 8.595-2004]
State system for ensuring the uniformity of measurements. Mass of petroleum and petroleum products. General requirements to procedures of measurements |
17.020 | |
| 00008-0595 2004 | GOST R 8.595-2004 | State system for ensuring the uniformity of measurements. Mass of petroleum and petroleum products. General requirements for procedures of measurements | 17.020 | |
| 00008-0596 2002 | GOST R 8.596-2002 | State system for ensuring the uniformity of measurements. Metrological assurance for measuring systems. Main principles | 17.020 | |
| 00008-0597 2003 | GOST R 8.597-2003 | State system of insuring the uniformity of measurements. Coaxial loads. Method of verification | 17.020 | |
| 00008-0598 2003 | GOST R 8.598-2003 | State system for ensuring the uniformity of measurements. Weighbridges for weighing of cinder vehicles in motion. Verification procedure | 17.020
17.060 |
|
| 00008-0599 2003 | GOST R 8.599-2003 | State system for ensuring the uniformity of measurements. Density and volume of oil. The tables of factots for recalculation of density and mass | 17.020 | |
| 00008-0600 2003 | GOST R 8.600-2003 | State system for ensuring the uniformity of measurements. Procedures of measurement of mass fraction of the parent substance of reagents and superpure substances by titrimetric methods. General requirements | 17.020 | |
| 00008-0601 2003 | GOST R 8.601-2003 | State system for ensuring the uniformity of measurements. Pressure of saturated steams of crude oil and products from oil. Measurement procedure | 17.020 | |
| 00008-0603 2003 | GOST R 8.603-2003 | State system for ensuring the uniformity of measurements. Weighbridges for weighing of road vehicles in motion. Verification procedure | 17.020
17.060 |
|
| 00008-0604 2004 | GOST R 8.604-2004 | State system for ensuring the uniformity of measurements. Medical diagnostic ultrasonic equipment. Portable foetal heartbeat detectors. General requirements for the declaration of parameters and measurement methods | 17.020 | |
| 00008-0605 2004 | GOST R 8.605-2004 | State system for ensuring the uniformity of measurements. Medical diagnostic ultrasonic equipment. General requirements for the measurement methods of continuous-wave doppler equipment | 17.020 | |
| 00008-0606 2004 | GOST R 8.606-2004 | State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of aerosols, suspensions and powdery materials | 17.020 | |
| 00008-0607 2004 | GOST R 8.607-2004 | State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of the frequency deviation | 17.020 | |
| 00008-0608 2004 | GOST R 8.608-2004 | State system for ensuring the uniformity of measurements. Mountings for verification of instruments measuring the expenditure and volume of water by calibrating with transformers (meters) of expenditure and (or) volume of water. General metrological and technical requirements | 17.020 | |
| 00008-0609 2004 | GOST R 8.609-2004 | State system for ensuring the uniformity of measurements. Certified reference materials of state accounting and control of nuclear materials system. Basic principles | 17.020 | |
| 00008-0610 2004 | GOST R 8.610-2004 | State system for ensuring the uniformity of measurements. Density of oil. The tables for recalculation | 17.020 | |
| 00008-0611 2005 | GOST R 8.611-2005 | State system for ensuring the uniformity of measurements. Standard thermoelectric converters platinumrhodium/platinum and platinumrhodium/platinumrhodium of the first, second and third grades. Verification procedure | 17.020 | |
| 00008-0612 | GOST R 8.612-2005 | State system for ensuring the uniformity of measurements. State verification schedule for means of measuring the surface density of coating in the range from 0,001 to 1,000 kg/sq m | 17.020 | |
| 00008-0613 2005 | GOST R 8.613-2005 | State system for ensuring the uniformity of measurements. Procedures for quantitative chemical analysis of water samples. General requirements for development | 17.020 | |
| 00008-0614 2005 | GOST R 8.614-2005 | State system for ensuring the uniformity of measurements. State service of standard reference data. Basic statements | 17.020 | |
| 00008-0615 2005 | GOST R 8.615-2005 | State system for ensuring the uniformity of measurements. The measuring of quantity of taken from bowels oil and oil gas. General metrological and technical requirements | 17.020 | |
| 00008-0616 2006 | GOST R 8.616-2006 | State system for ensuring the uniformity of measurements. State verification schedule for means of measuring ultrasound power in water within the frequency range from 0,5 to 12 MHz | 17.020 | |
| 00008-0617 2006 | GOST R 8.617-2006 | State system for ensuring the uniformity of measurements. State verification schedule for means measuring the power of electromagnetic waves within the frequency range from 37,50 to 53,57 GHz | 17.020 | |
| 00008-0618 2006 | GOST R 8.618-2006 | State system for ensuring the uniformity of measurements. State verification schedule for means measuring volume and mass flow of gas | 17.020 | |
| 00008-0620 2006 | GOST R 8.620-2006 | State system for ensuring the uniformity of measurements. Oilseeds and oilseed residues. Determination of oil and moisture content using pulsed nuclear magnetic resonance method | 17.020
67.200 |
|
| 00008-0621 2006 | GOST R 8.621-2006 | State system for ensuring the uniformity of measurements. Building materials and products. Moisture and heat conduction measurement procedure by the dielcometric method | 17.020 | |
| 00008-0627 2007 | ★ | GOST R 8.627-2007 | State system for еnsuring the uniformity of measurements. Measurements of coefficients of regular and diffuse transmittance of ultraviolet radiation. Methods for measurements | 17.020 |
| 00008-0632 2007 | ★ | GOST R 8.632-2007 | State system of ensuring the uniformity of measurements. Metrological ensuring of the chemical weapons destruction. Main principles | 17.020 |
| 00008-0637 2007 | ★ | GOST R 8.637-2007 | State system for ensuring the uniformity of measurements. Certified reference materials for metrological maintenance of pipeline non-destructive testing equipment. General requirements | 17.020 |
| 00008-0639 2008 | ★ | GOST R 8.639-2008 | State system for ensuring the uniformity of measurements. Metrological ensuring of the chemical weapons destruction. Terms and definitions | 17.020 |
| 00008-0640 2008 | ★ | GOST R 8.640-2008 | State sysem for ensuring the uniformity of measurements. Radiometers of ultraviolet radiation measurements for photolithography technological processes testing. Verification methods | 17.020 |
| 00008-0641 2008 | ★ | GOST R 8.641-2008 | State sysem for ensuring the iniformity of measurements. State verification scheme for measuring instruments of the water solutions ion content by electrochemical methods (pX measuring instruments) | 17.020 |
| 00008-0642 2008 | ★ | GOST R 8.642-2008 | State system for ensuring the uniformity of measurements. Metrological maintenance of measuring systems of units of the account of thermal energy. Main principles | 17.020 |
| 00008-0643 2008 | ★ | GOST R 8.643-2008 | State system for ensuring the uniformity of measurements. Reflectometers for extreme ultraviolet in region 10 - 30 nm. Verification procedure | 17.020 |
| 00012-00-005 1984 | GOST 12.0.005-84 | Occupational safety standards system. Metrological support of occupational safety. General | 13.100
17.020 |
|
| 00022-02-04 1994 | GOST R 22.2.04-94 | Safety in emergencies. Technogenal crashes and catastrophes. Metrological assurance of control of the complicated technical systems state. General statements and rules | 17.020
13.200 |
|
| 00022-02-04 1997 | GOST 22.2.04-97 | Safety in emergencies. Technogenal crashes and catastrophes. Metrological assurance of control of the cqmplicated technical systems state. General statements and rules | 17.020
13.200 |
|
| 00022-02-05 1994 | GOST R 22.2.05-94 | Safety in emergencies. Technogenal crashes and catastrophes. Standardized metrological and accuracical characteristies of control means and testing means used in complicated technical systems, forms and procedures of their metrological service. General statements and rules | 17.020
13.200 |
|
| 00022-02-05 1997 | GOST 22.2.05-97 | Safety in emergencies. Technogenal crashes and catastrophes. Standardized metrological and accuracical characteristics of control means and testing means used in complicated technical systems, forms and procedures of their metrological service. General statements and rules | 17.020
13.200 |
|
| 02930 1962 | GOST 2930-62 | Measuring instruments. Characters and signs | 17.020 | |
| 09031 1975 | GOST 9031-75 | Standardized blocks of hardness. Specifications | 19.060
17.020 |
|
| 11859 1966 | GOST 11859-66 | Harmonic analizers. Methods and means for verification | 17.220
17.020 |
|
| 12441 1966 | GOST 12441-66 | Horisontal length comparators. Methods and means for verification | 17.040.30
17.020 |
|
| 12997 1984 | GOST 12997-84 | State system of industrial devices and means of automatization. General technical requirements | 17.020
35.020 25.040.40 |
|
| 13012 | GOST 13012-67 | Examiners with limb reading. Methods and means of verification | 17.020 | |
| 13591 1968 | GOST 13591-68 | Potatoprobe weight. Methods and means of verification | 17.060
17.020 |
|
| 13675 1968 | GOST 13675-68 | Butterprobe weight. Methods and means of verification | 17.060
17.020 |
|
| 13697 1968 | GOST 13697-68 | Milk meters. Methods and means of verification | 17.060
17.020 |
|
| 13718 | GOST 13718-68 | Forque (torsional) balances. Methods and means of verification | 17.060
17.020 |
|
| 13760 1968 | GOST 13760-68 | Emanometers type ЭМ-6. Methods and instruments of their calibration | 17.240
17.020 |
|
| 13782 1968 | GOST 13782-68 | General-purpose spring dynamometers. Methods and means of verification | 17.100
17.020 |
|
| 13818 1968 | GOST 13818-68 | Lether thickness area measuring machine. Methods and means for verification | 17.040.30
17.020 |
|
| 13844 1968 | GOST 13844-68 | Technical metallic gauges. Methods and means of verification | 17.060
17.020 |
|
| 14017 1968 | GOST 14017-68 | State system for ensuring the uniformity of measurements. Force-measuring standard machines of 2 grade. Methods and means of verification | 17.100
17.020 |
|
| 14894 1969 | GOST 14894-69 | Thermoelectric standard 2-class and general industry use thermometers for low temperatures. Methods and means of verification | 17.200.20
17.020 |
|
| 15031 1969 | GOST 15031-69 | Contact instruments КПУ-3. Methods and means of verification | 17.020 | |
| 16263 1970 | GOST 16263-70 | State system for ensuring the uniformity of measurements. Metrology. Terms and definitions | 17.020 | |
| 16863 1971 | GOST 16863-71 | Measuring generators for frequency range 0,1-35 MHz. Methods and means of verification | 17.220.20
17.020 |
|
| 17215 1971 | GOST 17215-71 | Micrometric hole gauges. Methods and means of verification | 17.040.30
17.020 |
|
| 19611 1974 | GOST 19611-74 | Moisture meters neutron. Types and basic parameters | 17.020 | |
| 21171 1980 | GOST 21171-80 | Neutron generators. Types and parameters | 17.020 | |
| 21196 1975 | GOST 21196-75 | Neutron moisture gauges. General technical requirements | 17.020 | |
| 25164 1982 | GOST 25164-82 | Connections of SSI instruments and devices with external hydraulic and gas lines. Types, basic parameters and dimensions. Technical requirements | 17.020 | |
| 25852 1983 | GOST 25852-83 | Electric contacs from noble metals and their alloys. Specifications | 17.020
29.100.20 |
|
| 25932 1983 | GOST 25932-83 | Portable radioisotope soil and concrete moisture and density gauges. General specifications | 17.020 | |
| 27384 2002 | GOST 27384-2002 | Water. Rates of measurement error of characteristics of composition and properties | 13.060
17.020 |
|
| 27872 1988 | GOST 27872-88 | Metrology. Reference materials. Methods of production and calibration of reference materials of rocks and mineral raw materials | 71.040.30
17.020 |
|
| 27883 1988 | GOST 27883-88 | Industrial process measurement and control equipment. Reliability. General requirements and test methods | 03.120
17.020 25.040.40 35.240.50 |
|
| 29027 1991 | GOST 29027-91 | Moisture meters for solid and dry substances. Specifications and testing methods | 17.020 | |
| 50809 1995 | GOST R 50809-95 | Numbering and metrological ensuring of identification cards for financial settlements | 17.020
03.060 |
|
| 52314 2005 | GOST R 52314-2005 | Standard thermoelectric converters platinumrhodium/platinum and platinumrhodium/platinumrhodium of the first, second and third grades. General technical requirements | 17.020 | |
| IEC 60126 2001 | GOST R IEC 60126-2001 | Reference coupler for the measurement hearing aids. Construction requirements | 17.140.50
11.180 17.020 |
|
| IEC 60711 2001 | GOST R IEC 60711-2001 | Occluded-ear simulator. Technical requirements and test methods | 17.140.50
11.180 17.020 |
|
| IEC 61094-02 2001 | GOST R IEC 61094-2-2001 | State system for ensuring the uniformity of measurements. Measurement microphones. Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique | 17.020
33.160.50 |
|
| IEC 61094-03 2001 | GOST R IEC 61094-3-2001 | State system for ensuring the uniformity of measurements. Measurement microphones. Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique | 17.020
33.160.50 |
|
| ISO 05725-01 2002 | GOST R ISO 5725-1-2002 | Accuracy (trueness and precision) of measurement methods and results. Part 1. General principles and definitions | 17.020 | |
| ISO 05725-02 2002 | GOST R ISO 5725-2-2002 | Accuracy (trueness and precision) of measurement methods and results. Part 2. Basic method for the determination of repeatability and reproducibility of a standard measurement method | 17.020 | |
| ISO 05725-03 2002 | GOST R ISO 5725-3-2002 | Accuracy (trueness and precision) of measurement methods and results. Part 3. Intermediate measures of the precision of a standard measurement method | 17.020 | |
| ISO 05725-04 2002 | GOST R ISO 5725-4-2002 | Accuracy (trueness and precision) of measurement methods and results. Part 4. Basic methods for the determination of the trueness of a standard measurement method | 17.020 | |
| ISO 05725-05 2002 | GOST R ISO 5725-5-2002 | Accuracy (trueness and precision) of measurement methods and results. Part 5. Alternative methods for the determination of the precision of a standard measurement method | 17.020 | |
| ISO 05725-06 2002 | GOST R ISO 5725-6-2002 | Accuracy (trueness and precision) of measurement methods and results. Part 6. Use in practice of accuracy values | 17.020 | |
| ISO 06507-01 2007 | ★ | GOST R ISO 6507-1-2007 | Metals and alloys. Vickers hardness test. Part 1. Test method | 17.020 |
| 17.040 |
線及び角度の測定 |
|||
| Sort | Mk | 規格番号 | 規格名称(英語) | 国際規格分類 ( ICSコードの説明 ) |
| 00004-446 1986 | GOST 4.446-86 | System of product-quality indices. Measuring means for linear and angular measurements in mechanical engineering. Nomenclature of indices | 03.120
17.040.30 |
|
| 00004-447 1986 | GOST 4.447-86 | Product-quality index system. Optical instruments for linear measurements. Nomenclature of indices | 03.120
17.180.30 17.040.30 |
|
| 00004-448 1986 | GOST 4.448-86 | Product-quality index system. Optical instruments for angular measurements. Nomenclature of indices | 03.120
17.180.30 17.040.30 |
|
| 00004-449 1986 | GOST 4.449-86 | Product-quality index system. Optical instruments for control of surface roughness and quality. Nomenclature of indices | 03.120
17.180.30 17.040.30 |
|
| 00008-0016 1981 | GOST 8.016-81 | State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means measuring plane angle | 17.040.30
17.020 |
|
| 00008-0050 1973 | GOST 8.050-73 | State system for ensuring the uniformity of measurements. Reference conditions for linear and angular measuruments | 17.040 | |
| 00008-0051 1981 | GOST 8.051-81 | State system for ensuring the uniformity measurements. Permissible errors of measurement of linear dimensions to 500 mm | 17.040 | |
| 00008-0089 1973 | GOST 8.089-73 | State system for ensuring the uniformity of measurements. Spherometers. Verification methods and means | 17.040.30
17.020 |
|
| 00008-0099 1973 | GOST 8.099-73 | State system for ensuring the uniformity of measurement. Cludicating hole gauges graduated in 0,01mm. Methods and means of verification | 17.040.30
17.020 |
|
| 00008-0113 1985 | GOST 8.113-85 | State system for ensuring the uniformity of measurements. Vernier callipers. Verification methods | 17.040.30
17.020 |
|
| 00008-0114 1974 | GOST 8.114-74 | State system for ensuring the uniformity of measurements. Vertical optical length comparators. Methods an means of verification | 17.040.30
17.020 |
|
| 00008-0147 1975 | GOST 8.147-75 | State system for ensuring the uniformity of measurements. Measurement tool СЦ type for gear whell runout. Verification methods and means | 17.040.30
17.020 |
|
| 00008-0163 1975 | GOST 8.163-75 | State system for ensuring the uniformity of measurement. Depth gauges | 17.040.30
17.020 |
|
| 00008-0164 1975 | GOST 8.164-75 | State system for ensuring the uniformity of measurements. Vernier height gauges. Methods and means for verification | 17.040.30
17.020 |
|
| 00008-0165 1975 | GOST 8.165-75 | State system ensuring the uniformity of measurement. Sine bars. Methods and means for verification | 17.040.30
17.020 |
|
| 00008-0171 1975 | GOST 8.171-75 | State system of ensuring the uniformity of measurements. Actual measures of the surface density for radiation thickness gauges. General specifications | 17.040.30
17.040.20 |
|
| 00008-0181 1976 | GOST 8.181-76 | State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring of evolvent surfaces's parameters | 17.040.30
17.020 |
|
| 00008-0211 1984 | GOST 8.211-84 | State system for ensuring the uniformity of measurements. Ocular screw micrometer. Methods and means of verification | 17.040.30
17.020 |
|
| 00008-0224 1976 | GOST 8.224-76 | State system for ensuring the uniformity of measurements. High-pressure-air ganging instuments of flowmeter type. Methods and means of verification | 17.040.30 | |
| 00008-0235 1977 | GOST 8.235-77 | State system for ensuring the uniformity of measurements. Measuring rack wheels. Methods and means of verification | 17.040.30 | |
| 00008-0236 1977 | GOST 8.236-77 | State system for ensuring the uniformity of measurements. Measuring knives. Methods and means of verification | 17.040.30 | |
| 00008-0260 1977 | GOST 8.260-77 | State system for ensuring the uniformity of measurements. Measuring lever-toothed gear heads. Procedure of verification | 17.040.30 | |
| 00008-0266 1977 | GOST 8.266-77 | State system for ensuring the uniformity of measurements. Goniometers. Methods and means of verification | 17.040.30 | |
| 00008-0296 1978 | GOST 8.296-78 | State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for instruments measuring surface roughness parameters Rmax and Rz in range 0,025 - 1600 mkm | 17.040.30 | |
| 00008-0307 1978 | GOST 8.307-78 | State system for ensuring the uniformity of measurements. Reference gauge blocks of 3rd, 4th and 5th accurasy order and working gauge blocks of 1-5 accurasy classes from 125 to 1000mm. Methods and means for verification | 17.040 | |
| 00008-0321 1978 | GOST 8.321-78 | State system for ensuring the uniformity of measurements. Industrial applicato level gauges and float-type level gauges. Methods and means of calibration | 17.040.30 | |
| 00008-0336 1978 | GOST 8.336-78 | State system for ensuring the uniformity of measurements. ИЗМ type optical mechanical length measuring machines. Methods and means of calibration | 17.180.30
17.040.30 |
|
| 00008-0341 1979 | GOST 8.341-79 | State system for ensuring the uniformity of measurements. Low-pressure pneumatic length gages. Methods and means for verification | 17.040.30 | |
| 00008-0342 1979 | GOST 8.342-79 | State system for ensuring the uniformity of measurements. Hole gauges graduated in 0,001 and 0,002mm. Methods and means of verifcation | 17.040.30 | |
| 00008-0345 1979 | GOST 8.345-79 | State system for ensuring the uniformity of measurements. Control bars. Methods and means of verification | 17.040.30 | |
| 00008-0351 1979 | GOST 8.351-79 | State system for ensuring the uniformity of measurements. Slotted lines. Methods and means for verification | 17.040.30 | |
| 00008-0353 1979 | GOST 8.353-79 | State system for ensuring the uniformity of measurements. Standard rigid length measures of the olst accuracy order and working length measures of the 0 accuracy class to 1 m. Methods and means for verificatton | 17.040 | |
| 00008-0353 1996 | GOST 8.353-96 | State system for ensuring the uniformity of measurements. Standard line measures of length of the first grade and working line measures of the zero accuracy class to 1 m length. Method for verification | 17.040.30 | |
| 00008-0359 1979 | GOST 8.359-79 | State system for ensuring the uniformity of measurements. Gangs callipers with reading arrangement. Methods and means for verification | 17.040.30 | |
| 00008-0362 1979 | GOST 8.362-79 | State system for ensuring the uniformity of measurement. Coating thickness measurement. Terms and definitions | 17.040
01.040.17 |
|
| 00008-0367 1979 | GOST 8.367-79 | State system for ensuring the uniformity of measurments. Reference gauge-blocks оf the 1st and the 2nd accuracy orders and working gauge-blocks of 00 and 0 accuracy classes up to 1000 mm. Methods and means for verification | 17.040.30 | |
| 00008-0376 1980 | GOST 8.376-80 | State system for ensuring the uniformity of measurements. Universal instruments for measuring cvolvents. Methods and means of verification | 17.040.30 | |
| 00008-0411 1981 | GOST 8.411-81 | State system for ensuring the uniformity of measurements. Lever microme ters. Rules and procedure of verification | 17.040.30 | |
| 00008-0420 1981 | GOST 8.420-81 | State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means of measuring straightness and flatness deviation | 17.040.30 | |
| 00008-0420 2002 | GOST 8.420-2002 | State system for ensuring the uniformity of measurements. State verification schedule for means of measuring straightness and flatness deviation | 17.020
17.040 |
|
| 00008-0459 1982 | GOST 8.459-82 | State system for ensuring the uniformity of measurements. Pitch diference measuring instruments. Methods and means of verification | 17.040.30 | |
| 00008-0471 1982 | GOST 8.471-82 | State system for ensuring the uniformity of measurements. Machines for textile web lengths measuring. Methods and means of verification | 17.040.30 | |
| 00008-0481 1982 | GOST 8.481-82 | State system for ensuring the uniformity of measurements. Roundness measuring instruments. Methods and means for verification | 17.040.30 | |
| 00008-0490 1983 | GOST 8.490-83 | State system for ensuring the uniformity of measurements. Instruments for measurements of gear interaxial distance. Methods of verification | 17.040.30 | |
| 00008-0491 1983 | GOST 8.491-83 | State system for ensuring the uniformity of measurements. Electrocontact converters for checking linear dimensions. Methods and means of verification | 17.220.20
17.040.30 |
|
| 00008-0495 1983 | GOST 8.495-83 | State system for ensuring the uniformity of measurements. Ultrasonic contact-type instruments for measurement of thickness. Verification methods and means | 17.040.30 | |
| 00008-0502 1984 | GOST 8.502-84 | State system for ensuring the uniformity of measurments. Coating thickness gauges. Verification methods and means | 17.040.30 | |
| 00008-0503 1984 | GOST 8.503-84 | State system for ensuring the uniformity of measurements. State verification schedule for means of measuring length within the range of 24-75000 m | 17.040.30 | |
| 00008-0506 1984 | GOST 8.506-84 | State system for ensuring the uniformity of measurements. Convex spherical mirrors. Measurement technique of curvature radius and local departures of surfaces forms from sphericity by holographic shear interferometry | 17.040.30 | |
| 00008-0528 1985 | GOST 8.528-85 | State system for ensuring the uniformity of measurements. Second class reference line gauges and fifth accuracy class working line gauges. Verification procedure | 17.040.30 | |
| 00008-0543 1986 | GOST 8.543-86 | State system for ensuring the uniformity of measurements. State verification schedule for means of measuring deformation | 17.040.30 | |
| 00008-0548 1986 | GOST 8.548-86 | State system for ensuring the uniformity of measurements. Clock-type dial indicators graduated in unit divisions of 0,01mm. Procedure of verification | 17.040.30
17.020 |
|
| 00008-0549 1986 | GOST 8.549-86 | The state system of ensuring the uniformity of measurements. Permissible errors of measurement of linear dimensians to 500 mm with unindicated tolerances | 17.040 | |
| 00008-0628 2007 | ★ | GOST R 8.628-2007 | State system for ensuring the uniformity of measurements. Single-crystal silicon nanometer range relief measures. Requirements for geometrical shapes, linear sizes and manufacturing material selection | 17.040.01 |
| 00008-0629 2007 | ★ | GOST R 8.629-2007 | State system for ensuring the uniformity of measurements. Nanometer range relief measures with trapezoidal profile of elements. Methods for verification | 17.040.01 |
| 00008-0630 2007 | ★ | GOST R 8.630-2007 | State system for ensuring the uniformity of measurements. Atomic-force scanning probe measuring microscopes. Methods for verification | 17.040.01 |
| 00008-0631 2007 | ★ | GOST R 8.631-2007 | State system for ensuring the uniformity of measurements. Scanning electron measuring microscopes. Methods for verification | 17.040.01 |
| 00008-0635 2007 | ★ | GOST R 8.635-2007 | State system for ensuring the unifоrmity of measuremеnts. Atomic-forсe scanning probe microscopes. Method for calibration | 17.040.01 |
| 00008-0636 2007 | ★ | GOST R 8.636-2007 | State system for ensuring the unifоrmity of measuremеnts. Scanning electron microscopes. Methods for calibration | 17.040.01 |
| 00008-0644 2008 | ★ | GOST R 8.644-2008 | State system for ensuring the uniformity of measurements. Nanometer range relief measure with trapezoidal profile of elements. Method for calibration | 17.040.01 |
| 00010 1988 | GOST 10-88 | Inside micrometers. Specifications | 17.040.30 | |
| 00162 1990 | GOST 162-90 | Depth gauges. Specifications | 17.040.30 | |
| 00164 1990 | GOST 164-90 | Vernier height gauges. Specifications | 17.040.30 | |
| 00166 | GOST 166-89 | Vernier callipers. Specifications | 17.040.30 | |
| 00300 | GOST 300-69 | Curvemeters | 17.040.30 | |
| 00427 1975 | GOST 427-75 | Measurihg metal rules. Basic parameters and dimensions. Technical requirements | 17.040.30 | |
| 00577 1968 | GOST 577-68 | Clock-type dial indicators graduated in unit divisions of 0,01 mm. Specifications | 17.040.30 | |
| 00868 1982 | GOST 868-82 | Internal dial gauges graduated in 0,01 mm. Specifications | 17.040.30 | |
| 01623 1989 | GOST 1623-89 | Gauges for inch thread with 55 degree corner profile. Tolerances | 17.040.30 | |
| 02015 1984 | GOST 2015-84 | Fixed plain gauges. Technical requirements | 17.040.30 | |
| 02016 1986 | GOST 2016-86 | Thread gauges. Specifications | 17.040.30 | |
| 02216 1984 | GOST 2216-84 | Adjustable plain snap gauges. Specifications | 17.040.30 | |
| 02386 1973 | GOST 2386-73 | Level vials. Specifications | 17.040.30 | |
| 02475 1988 | GOST 2475-88 | Wires and rolls. Specifications | 17.040.30 | |
| 02533 1988 | GOST 2533-88 | Gauges for staight pipe thread. Tolerances | 17.040.30 | |
| 02534 1967 | GOST 2534-67 | Height and depth limit gauges. Tolerances | 17.040.30 | |
| 02534 1977 | GOST 2534-77 | Height and depth limit gauges. Tolerances | 17.040.30 | |
| 02689 1954 | GOST 2689-54 | Tolerances and fits of dimensions over 500 to 10000 mm | 21.020
17.040.10 |
|
| 02849 1977 | GOST 2849-77 | Gauges for bevels of instruments. Basic dimensions and tolerances. Technical requirements | 17.040.30 | |
| 02849 1994 | GOST 2849-94 | Gauges for bevets of instruments. Specifications | 17.040.30 | |
| 02875 1988 | GOST 2875-88 | Plane-angle standards of the prism type. General specifications | 17.040.30 | |
| 03047 1966 | GOST 3047-66 | Tolerances and fits in dimensions less than 1 mm | 21.020
17.040.10 |
|
| 03199 1984 | GOST 3199-84 | Serew gauges for metric screw thread of diameters less than 1 mm. Tolerances | 17.040.30 | |
| 03749 1977 | GOST 3749-77 | Checking 90 degree C squares. Specifications | 17.040.30 | |
| 03899 1981 | GOST 3899-81 | Transducers with electric contacts for control of linear dimensions. Specifications | 17.040.30 | |
| 04046 1980 | GOST 4046-80 | Sine bars. Specifications | 17.040.30 | |
| 04119 1976 | GOST 4119-76 | Accessories sets for plane-parallel end measures of length. Main parameters and dimensions. Specifications | 17.040.30 | |
| 04380 1993 | GOST 4380-93 | Micrometers with inserts. Specifications | 17.040.30 | |
| 04381 1987 | GOST 4381-87 | Lever-type micrometers. General specifications | 17.040.30 | |
| 05368 1981 | GOST 5368-81 | Cylindrical gear checking machines. Types. Basic parameters. Accuracy limits | 17.040.30 | |
| 05378 1988 | GOST 5378-88 | Vernier protractors. Specifications | 17.040.30 | |
| 05584 1975 | GOST 5584-75 | Lever-toothed indicators graduated in 0,01 mm. Specifications | 17.040.30 | |
| 05939 | GOST 5939-51 | [?] | 17.040.30 | |
| 06485 1969 | GOST 6485-69 | Gauges for inch taper thread with 60 corner profile. Types. Basic dimensions and tolerances | 17.040.30 | |
| 06507 1990 | GOST 6507-90 | Micrometers. Specifications | 17.040.30 | |
| 06512 1974 | GOST 6512-74 | Metering spur gears. Specifications | 17.040.30 | |
| 06528 1953 | GOST 6528-53 | Gauges for splined shaft and holes with evolute profile. Tolerances | 17.040.30 | |
| 06636 1969 | GOST 6636-69 | Standard linear dimensions | 17.040
21.020 |
|
| 07013 1967 | GOST 7013-67 | Measuring knives | 17.040.30 | |
| 07157 1979 | GOST 7157-79 | Gauges for pine taper thread. Types. Basic dimensions and tolerances | 17.040.30 | |
| 07470 1992 | GOST 7470-92 | Micrometric depthometers. Specifications | 17.040.30 | |
| 07502 1989 | GOST 7502-89 | [withdrawn]
Measuring metal tapes. Specifications |
17.040.30 | |
| 07502 1998 | GOST 7502-98 | Measuring metal tapes. Specifications | 17.040.30 | |
| 07660 | GOST 7660-55 | [?] | 17.040.30 | |
| 07661 1967 | GOST 7661-67 | Dial depth gauges. Specifications | 17.040.30 | |
| 07713 1962 | GOST 7713-62 | Limits and fits. Basic definitions | 21.020
17.040.10 |
|
| 07951 1980 | GOST 7951-80 | Geuges for checking of straight splined joints. Tolerances | 17.040.30 | |
| 08026 1992 | GOST 8026-92 | Levelling rules. Specifications | 17.040.30 | |
| 08517 1990 | GOST 8517-90 | Means of automation for grindling. General specifications | 17.040.30 | |
| 08593 1981 | GOST 8593-81 | Basic norms of interchangeabihty. Standart rates of taper and cone angles | 17.040
21.020 |
|
| 08809 1971 | GOST 8809-71 | Limits and fits of dimension less than 0,1 min | 21.020
17.040.10 |
|
| 08867 1989 | GOST 8867-89 | Gauges for tool joints thread. Types. Basic dimensions and tolerances | 17.040.30 | |
| 08898 1978 | GOST 8898-78 | Step-bearing for measuring instruments. General specifications | 17.040.30 | |
| 09038 1990 | GOST 9038-90 | Gauge blocks. Specifications | 17.040.30 | |
| 09244 1975 | GOST 9244-75 | Inside callipers graduated in 0,001 and 0,002 mm. Basic parameters. Technical requirements | 17.040.30 | |
| 09378 1975 | GOST 9378-75 | Surface roughness comparison specimens. Technical requirements | 17.040.20 | |
| 09378 1993 | GOST 9378-93 | Roughness comparison specimens. General specifications | 17.040.20 | |
| 09392 1989 | GOST 9392-89 | Levelling squares and bars. Specifications | 17.040.30 | |
| 09459 1987 | GOST 9459-87 | Gauges for bevel gears and gear pairs. Types. Basic parameters. Accuracy limits | 17.040.30 | |
| 09696 1982 | GOST 9696-82 | Multi-revolution dial indicators graduated in 0,001 and 0,002 mm. Types. Basic parameters. Specifications | 17.040.30 | |
| 09776 1982 | GOST 9776-82 | Gauges for worms, worm wheels and worm wheel drives. Types and dimensions. Precision standard | 17.040.30 | |
| 10071 1989 | GOST 10071-89 | Gauges for trapezoidal tread. Tolerances | 17.040.30 | |
| 10197 1970 | GOST 10197-70 | Stands and supports for measuring heads. Specifications | 17.040.30 | |
| 10278 1981 | GOST 10278-81 | Gages for buttress thread. Tolerances | 17.040.30 | |
| 10387 1981 | GOST 10387-81 | Measuring machines for checking fine pitch spur gears. Types. Basic dimensions, standards of accuracy | 17.040.30 | |
| 10653 1984 | GOST 10653-84 | Gauges for triangular thread of internal-external upset drill pipes with coup lings. Types, basic dimensions and tolerances | 17.040.30 | |
| 10654 1981 | GOST 10654-81 | Gauges for triangular thread for tubing pipes with couplings. Types. Basic dimensions and tolerances | 17.040.30 | |
| 10655 1981 | GOST 10655-81 | Gauges for triangular thread for casing pipes with couplings. Types. Basic dimensions and tolerances | 17.040.30 | |
| 10905 1986 | GOST 10905-86 | Surface plates and face-plates. Specifications | 17.040.30 | |
| 10908 1975 | GOST 10908-75 | Mechanical quadrants with level. Specifications | 17.040.30 | |
| 11007 1966 | GOST 11007-66 | Measuring tips of apparatuses for linear measurements. Specifications | 17.040.30 | |
| 11098 1975 | GOST 11098-75 | Gauge callipers with reading arrangement. Specifications | 17.040.30 | |
| 11196 1974 | GOST 11196-74 | Levels with micrometrical feed of ampule. Specifications | 17.040.30 | |
| 11357 1989 | GOST 11357-89 | Fine-modul bevel gear testers. Types and main specifications. Accuracy norms | 17.040.30 | |
| 11358 1989 | GOST 11358-89 | Dial-type thickness gauges and dial type wall thickness gauges graduated in 0,01 and 0,1 mm. Specifications | 17.040.30 | |
| 11472 1969 | GOST 11472-69 | Limits and fits. Grades of tolerance 02-09 | 21.020
17.040.10 |
|
| 11710 1966 | GOST 11710-66 | Limits and fits for the parts of plastics | 21.020
17.040.10 |
|
| 12069 1990 | GOST 12069-90 | Line measures squared of length. Specifications | 17.040.30 | |
| 12441 1966 | GOST 12441-66 | Horisontal length comparators. Methods and means for verification | 17.040.30
17.020 |
|
| 13494 1980 | GOST 13494-80 | Geodetical protector. Specifications | 17.040.30
07.040 |
|
| 13762 1986 | GOST 13762-86 | Measuring means for linear and angular measurements. Marking, packing, transporting and storage | 17.040.30 | |
| 13798 1968 | GOST 13798-68 | Gauges for round screw thread of 12 mm diameters. Basic dimensions and tolerances | 17.040.30 | |
| 13810 1968 | GOST 13810-68 | Plain gauges for dimensions over 500 mm. Tolerances | 17.040.30 | |
| 13818 1968 | GOST 13818-68 | Lether thickness area measuring machine. Methods and means for verification | 17.040.30
17.020 |
|
| 14025 1984 | GOST 14025-84 | Limit gauges in woodworking. Tole rances | 17.040.30 | |
| 14747 1988 | GOST 14747-88 | Gauges for buttress strengthened thread. Tolerances | 17.040.30 | |
| 14748 1969 | GOST 14748-69 | Cylindrical and hexahedral handles for plug-gauges. Design and dimensions | 17.040.30 | |
| 14749 1969 | GOST 14749-69 | Snigle-ended handles for ganging members. Design and dimensions | 17.040.30 | |
| 14750 1969 | GOST 14750-69 | Plastic single-ended handles for ganging members. Design and dimensions | 17.040.30 | |
| 14751 1969 | GOST 14751-69 | Cover handles for plain incomplete plug-gauges. Design and dimensions | 17.040.30 | |
| 14752 1969 | GOST 14752-69 | Handles for spherical inside gauges. Design and dimensions | 17.040.30 | |
| 14807 1969 | GOST 14807-69 | Plain double-end plug gauges with inserts of diameter from 1 to 6 mm. Design and dimensions | 17.040.30 | |
| 14808 1969 | GOST 14808-69 | Go plain plug gauges with inserts of diameter from 1 to 6 mm. Design and dimensions | 17.040.30 | |
| 14809 1969 | GOST 14809-69 | No-go plain plug gauges with inserts of diameter from 1 to 6 mm. Design and dimensions | 17.040.30 | |
| 14810 1969 | GOST 14810-69 | Plain double-end plug gauges with inserts of diameter over 3 to 50 mm. Design and dimensions | 17.040.30 | |
| 14811 1969 | GOST 14811-69 | Plain double-plug gauges with no-go inserts of not full-from with diameter from 6 to 50 mm. Design and dimensions | 17.040.30 | |
| 14812 1969 | GOST 14812-69 | Go plain plug gauges with inserts of diameter over 50 to 75 mm. Design and dimensions | 17.040.30 | |
| 14813 1969 | GOST 14813-69 | No-go plain plug gauges with inserts of diameter over 50 to 75 mm. Design and dimensions | 17.040.30 | |
| 14814 1969 | GOST 14814-69 | No-go plain plug gauges with inserts of not full-form with diameter over 50 to 75 mm. Design and dimensions | 17.040.30 | |
| 14815 1969 | GOST 14815-69 | Go plain plug gauges with headpieces of diameter over 50 to 100 mm. Design and dimensions | 17.040.30 | |
| 14816 1969 | GOST 14816-69 | No-go plain plug gauges with headpieces of diameter over 50 to 100 mm. Design and dimensions | 17.040.30 | |
| 14817 1969 | GOST 14817-69 | Stamped go plain plug gauges with headpieces of diameter over 50 to 100 mm. Design and dimensions | 17.040.30 | |
| 14818 1969 | GOST 14818-69 | Stamped no-go plain plug gauges with headpieces of diameter over 50 to 100 mm. Design and dimensions | 17.040.30 | |
| 14819 1969 | GOST 14819-69 | No-go plain plug gauges with headpieces of not full-form with diameter from 50 to 100 mm. Design and dimensions | 17.040.30 | |
| 14820 1969 | GOST 14820-69 | Stamped go plain plug gauges of not full-form with diameter over 100 to 160 mm. Design and dimensions | 17.040.30 | |
| 14821 1969 | GOST 14821-69 | Stamped no-go plain plug gauges of not full-form with diameter over 75 to 160 mm. Design and dimensions | 17.040.30 | |
| 14822 1969 | GOST 14822-69 | Go plain plug gauges of not full-form with diameter over 100 to 300 mm. Design and dimensions | 17.040.30 | |
| 14823 1969 | GOST 14823-69 | No-go plain plug gauges of not full-form with diameter over 75 to 300 mm. Design and dimensions | 17.040.30 | |
| 14824 1969 | GOST 14824-69 | Go plain plug gauges of not full-form with laps of diameter over 160 to 300 mm. Design and dimensions | 17.040.30 | |
| 14825 1969 | GOST 14825-69 | No-go plain plug gauges of not full-form with laps of diameter over 160 to 360 mm. Design and dimensions | 17.040.30 | |
| 14826 1969 | GOST 14826-69 | Sheet plain single-end plug gauges with diameter over 50 to 250 mm. Design and dimensions | 17.040.30 | |
| 14827 1969 | GOST 14827-69 | No-go ball plug gauges with diameter over 100 to 360 mm. Design and dimensions | 17.040.30 | |
| 14864 1978 | GOST 14864-78 | Pneumatic plug gauges from 3 to 160 mm. Specifications | 17.040.30 | |
| 14865 1978 | GOST 14865-78 | Setting rings for internal measuring instruments. Specifications | 17.040.30 | |
| 15593 1970 | GOST 15593-70 | Indication. Gange heads and transducers. Connected sizes | 17.040.30 | |
| 15876 1990 | GOST 15876-90 | Cauges for wood and wood material wares. Specifications | 17.040.30 | |
| 15900 1985 | GOST 15900-85 | Sorting photoelectrical transducers. Specifications | 17.040.30 | |
| 15982 1970 | GOST 15982-70 | Levels with micrometrical feed of ampule. Methods and means of veritification | 17.040.30 | |
| 15988 1980 | GOST 15988-80 | Bevel and hypoid gears running testers. Basic dimensions | 17.040.30 | |
| 16085 1980 | GOST 16085-80 | Gauges for checking position of surfaces. Tolerances | 17.040.30 | |
| 16473 1980 | GOST 16473-80 | Bevel and hypoid running testers. Standards of accuracy | 17.040.30 | |
| 16775 1993 | GOST 16775-93 | Plain snap-gauges with cemented carbide alloy plates for diameters from 3 to 180 mm. Dimensions | 17.040.30 | |
| 16778 1993 | GOST 16778-93 | Plain plug gauges with cemented carbide alloy for diameters from 1 to 6 mm. Dimensions | 17.040.30 | |
| 16780 1971 | GOST 16780-71 | Plain double ended plugs gauges with insert ПР and ring of cemented carbide with diameters from 6,3 to 50 mm nominal diameter. Design and dimensions | 17.040.30 | |
| 17215 1971 | GOST 17215-71 | Micrometric hole gauges. Methods and means of verification | 17.040.30
17.020 |
|
| 17320 1971 | GOST 17320-71 | State system for ensuring the uniformity of measurements. Plain gauges for dimensions over 500 mm. Verification methods and means | 17.040.30 | |
| 17336 1980 | GOST 17336-80 | Gauges for hebbing cutters. Types and basic parameters. General technical requirements | 17.040.30 | |
| 17353 1989 | GOST 17353-89 | Instruments for measurements of form and position deviations of surfaces of revolution. Types. General technical requirements | 17.040.30 | |
| 17381 1984 | GOST 17381-84 | Gauges for buttress thread. Required dimensions | 17.040.30 | |
| 17736 1972 | GOST 17736-72 | Double-ended plain plug gauges with split bushes and inserts from 0,10 up to 0,95 mm nominal diameter. Design and dimensions | 17.040.30 | |
| 17737 1972 | GOST 17737-72 | Double-ended plain plug-gauges with inset inserts from 0,30 up to 0,95 mm nominal diameter. Design and dimensions | 17.040.30 | |
| 17738 1972 | GOST 17738-72 | Plain plug-gauges (go side) with inserts of diameter from 0,30 up to 0,95 mm. Design and dimensions | 17.040.30 | |
| 17739 1972 | GOST 17739-72 | Plain plug-gauges (not go side) with inserts of diameter from 0,30 up to 0,95 mm. Design and dimensions | 17.040.30 | |
| 17740 1972 | GOST 17740-72 | Double-ended plain plug-gauges with inserts of diameter from 0,30 up to 0,95mm. Design and dimensions | 17.040.30 | |
| 17741 1972 | GOST 17741-72 | Double-ended handles for plain plug-gauges with split bushes. Design and basic dimensions | 17.040.30 | |
| 17742 1972 | GOST 17742-72 | Double-ended handles for plain plug-gauges with inset inserts from 1 mm nominal diameter. Design and dimensions | 17.040.30 | |
| 17756 1972 | GOST 17756-72 | Threaded plug-gauges with inserts with full-form of thread of diameters from 1 to 100 mm. Design and basic dimensions | 17.040.30 | |
| 17757 1972 | GOST 17757-72 | Threaded plug-gauges with inserts with incomplete form of thread of diameters from 1 to 100 mm. Design and basic dimensions | 17.040.30 | |
| 17758 1972 | GOST 17758-72 | Double-ended threaded plug-gauges with inserts of diameters from 2 to 50 mm. Design and basic dimensions | 17.040.30 | |
| 17759 1972 | GOST 17759-72 | Threaded plug-gauges with full form of thread of diameters from 52 to 100 mm. Design and basic dimensions | 17.040.30 | |
| 17760 1972 | GOST 17760-72 | Threaded plug-gauges with incomplete form of thread of diameters from 52 to 100 mm. Design and basic dimensions | 17.040.30 | |
| 17761 1972 | GOST 17761-72 | Threaded plug-gauges with full of thread of diameter from 105 to 300 mm. Design and basic dimensions | 17.040.30 | |
| 17762 1972 | GOST 17762-72 | Threaded plug-gauges with incomplete form of thread of diameters from 105 to 300 mm. Design and basic dimensions | 17.040.30 | |
| 17763 1972 | GOST 17763-72 | Threaded plug-gauges with full form of thread of diameters from 1 to 100 mm. Design and basic dimensions | 17.040.30 | |
| 17764 1972 | GOST 17764-72 | Threaded ring-gauges with incomplete form of thread of diameters from 2 to 100 mm. Design and basic dimensions | 17.040.30 | |
| 17765 1972 | GOST 17765-72 | Threaded ring-gauges with full-form of thread of diameters from 105 to 300 mm. Design and basic dimensions | 17.040.30 | |
| 17766 1972 | GOST 17766-72 | Threaded ring-gauges with incomplete form of thread of diameters from 105 to 300 mm. Design and basic dimensions | 17.040.30 | |
| 17767 1972 | GOST 17767-72 | Screw-in handles for plug-gauges and ring-gaugess. Design and basic dimensions | 17.040.30 | |
| 18061 1990 | GOST 18061-90 | Radiation thickness gauges. General specifications | 17.040.30 | |
| 18355 1973 | GOST 18355-73 | Plain single-ended double-limit snap gauges for lenght over 10 to 360 mm. Design and dimensions | 17.040.30 | |
| 18356 1973 | GOST 18356-73 | Plain double-ended snap gauges for lenght over 10 to 360 mm. Design and dimensions | 17.040.30 | |
| 18357 1973 | GOST 18357-73 | Plain double-ended snap gauges for length over 300 to 500 mm. Design and dimensions | 17.040.30 | |
| 18358 1993 | GOST 18358-93 | Plain snap-gauges for diameters from 1 to 6 mm. Dimensions | 17.040.30 | |
| 18360 1993 | GOST 18360-93 | Plate snap-gauges for diameters from 3 to 260 mm. Dimensions | 17.040.30 | |
| 18365 1993 | GOST 18365-93 | Plate snap-gauges with changeable lips for diameters over 100 to 360 mm. Dimensions | 17.040.30 | |
| 18367 1993 | GOST 18367-93 | Pressed snap-gauges for diameters over 10 to 180 mm. Dimensions | 17.040.30 | |
| 18369 1973 | GOST 18369-73 | Cover handles for snap gauges. Desing and dimensions | 17.040.30 | |
| 18465 1973 | GOST 18465-73 | Gauges for metric thread from 1 to 68 mm. Required dimensions | 17.040.30 | |
| 18466 1973 | GOST 18466-73 | Gauges for metric thread over 68 to 200 mm. Required dimensions | 17.040.30 | |
| 18833 1973 | GOST 18833-73 | Lever-gearing measuring heads. Specifications | 17.040.30 | |
| 18922 1973 | GOST 18922-73 | Screw plug-gauges with full-form inserts for pipe cylindrical threads from 1/16"up to 4" nominal diameter. Construction and basic sizes | 17.040.30 | |
| 18923 1973 | GOST 18923-73 | Screw plug-gauges with truncated form inserts for pipe cylindrical threads from 1/16 "up to 4" nominal diameter. Construction and basic sizes | 17.040.30 | |
| 18924 1973 | GOST 18924-73 | Screw double-ended plugs with inserts for pipe cylindrical threads from 1/16 "up to 1 1/2" nominal diameter. Construction and basic sizes | 17.040.30 | |
| 18925 1973 | GOST 18925-73 | Screw plug-gauges with full form gaging members for pipe cylindrical threads from 1 3/4 "up to 3 3/4" nominal diameter. Construction and basic sizes | 17.040.30 | |
| 18926 1973 | GOST 18926-73 | Screw plug-gauges with truncated form gaging members for pipe cylindrical thread from 1 3/4"up to 3 3/4" nominal diameter. Construction and basic sizes | 17.040.30 | |
| 18927 1973 | GOST 18927-73 | Full form screw plug-gauges for pipe cylindrical threads from 4"up to 6" nominal diameter. Construction and basic sizes | 17.040.30 | |
| 18928 1973 | GOST 18928-73 | Truncated form screw plug-gauges for pipe cylindrical threads from 4" up to 6" nominal diameter. Construction and basic sizes | 17.040.30 | |
| 18929 1973 | GOST 18929-73 | Full form screw ring-gauges for pipe cylindrical threads from 1/16" up to 3 3/4" nominal diameter. Construction and basic sizes | 17.040.30 | |
| 18930 1973 | GOST 18930-73 | Truncated form screw ring-gauges for pipe cylindrical threads from 1/16" up to 3 3/4" nominal diameter. Construction and basic sizes | 17.040.30 | |
| 18931 1973 | GOST 18931-73 | Full form screw ring-gauges for pipe cylindrical threads from 4" up to 6" nominal diameter. Construction and basic sizes | 17.040.30 | |
| 18932 1973 | GOST 18932-73 | Truncated from screw ring-gauges for pipe cylindrical threads from 4" up to 6" nominal diameter. Construction and basic sizes | 17.040.30 | |
| 18961 1980 | GOST 18961-80 | Diamond needles for suface roughness measurements. Technical conditions | 17.040.30 | |
| 19300 1986 | GOST 19300-86 | Instruments for measurement of surface roughness by the profile method. Contact profilographs and profilometers. Types and main parameters | 17.040.30 | |
| 20305 1980 | GOST 20305-80 | Gauges for tapers 7:24. Basic dimensions and tolerances. Technical requirements | 17.040.30 | |
| 20305 1994 | GOST 20305-94 | Gauges for tapers 7:24. Specifications | 17.040.30 | |
| 21401 1975 | GOST 21401-75 | Plain limit gauges for dimensions up to 500 mm. Required dimensions | 17.040.30 | |
| 21524 1976 | GOST 21524-76 | Round timber. Means for linear and volumetric measurements. Types and basic parameters. Technical requirements | 17.040.30 | |
| 21625 1976 | GOST 21625-76 | Digital information-measuring mechanism with stream-jet-convertor for measuring linear sizes | 17.040.30 | |
| 22238 1976 | GOST 22238-76 | Nondestractiv testing. Mesure-reference for thickness gauges of coverings. General principles | 17.040.30 | |
| 22601 1977 | GOST 22601-77 | Control bars. Specifications | 17.040.30 | |
| 22634 1977 | GOST 22634-77 | Gauges for connections of drill pipes with stabilizing collars and tool-joints. Specifications | 17.040.30 | |
| 24109 1980 | GOST 24109-80 | Conges for kuj joints. Tolerances | 17.040.30 | |
| 24110 1980 | GOST 24110-80 | Key-slotted plug-ganges with diameter from 9 to 18 mm. Design and dimensions | 17.040.30 | |
| 24111 1980 | GOST 24111-80 | Key-slotted plug-ganges with diameter over 18 to 56 mm. Design and dimensions | 17.040.30 | |
| 24112 1980 | GOST 24112-80 | Key-slotted plug-ganges with diameter over 56 to 125 mm. Design and dimensions | 17.040.30 | |
| 24113 1980 | GOST 24113-80 | Key-slotted prism-ganges for shalts with diameter over 8 to 22 mm. Design and dimensions | 17.040.30 | |
| 24114 1980 | GOST 24114-80 | Key-slotted prism-ganges for shafts with diameter over 22 to 200 mm. Design and dimensions | 17.040.30 | |
| 24115 1980 | GOST 24115-80 | Keyway depth ganges for holes with diameter from 3 to 10 mm. Design and dimensions | 17.040.30 | |
| 24116 1980 | GOST 24116-80 | Keyway depth ganges for holes with diameter over 10 to 90 mm. Design and dimensions | 17.040.30 | |
| 24117 1980 | GOST 24117-80 | Keyway depth ganges for holes with diameter over 90 to 200 mm. Design and dimensions | 17.040.30 | |
| 24118 1980 | GOST 24118-80 | Keyway depth ganges for shafts with diameter from 6 to 200 mm. Design and dimensions | 17.040.30 | |
| 24119 1980 | GOST 24119-80 | Keyway depth ganges for segmental key shots. Design and dimensions | 17.040.30 | |
| 24120 1980 | GOST 24120-80 | Keyway ganges for dimensions from 1 to 3 mm. Design and dimensions | 17.040.30 | |
| 24121 1980 | GOST 24121-80 | Keyway ganges for dimensions over 3 to 50 mm. Design and dimensions | 17.040.30 | |
| 24314 1980 | GOST 24314-80 | Electronic measuring instruments. Terms and definitions, methods of expressing errors and general test conditions | 01.040.17
17.040.30 |
|
| 24475 1980 | GOST 24475-80 | Ganges for metric taper thread. Tolerances | 17.040.30 | |
| 24672 1981 | GOST 24672-81 | Gauges for taper thread. Specifications | 17.040.30 | |
| 24773 1981 | GOST 24773-81 | Surfaces with regular microshape. Classification, parameters and characteristics | 25.220
17.040.20 |
|
| 24851 1981 | GOST 24851-81 | Plain ganges for cylindrical holes and shalts. Types | 17.040.30 | |
| 24852 1981 | GOST 24852-81 | Plain ganges for dimensions over 500 to 3150 mm. Tolerances | 17.040.30 | |
| 24853 1981 | GOST 24853-81 | Plain gauges for dimensions to 500 mm. Tolerances | 17.040.30 | |
| 24932 1981 | GOST 24932-81 | Ganges for tapered joints. Tolerances | 17.040.30 | |
| 24939 1981 | GOST 24939-81 | Ganges for parallel threads. Types | 17.040.30 | |
| 24959 1981 | GOST 24959-81 | Gauges for splined joints. Technical requirements | 17.040.30 | |
| 24960 1981 | GOST 24960-81 | Complex ganges for splined straightsided joints. Types, basic dimensions | 17.040.30 | |
| 24961 1981 | GOST 24961-81 | Plate double-end plug ganges with diameter from 14 to 98 mm. Design and dimensions | 17.040.30 | |
| 24962 1981 | GOST 24962-81 | Go plug ganges of not full form with diameter from 102 to 125 mm. Design and dimensions | 17.040.30 | |
| 24963 1981 | GOST 24963-81 | Not-go plug ganges of not full form with diameter from 102 to 125 mm. Design and dimensions | 17.040.30 | |
| 24964 1981 | GOST 24964-81 | Not-go snap-gauges for checking internal diameter of splined shafts with straight-sided profile when centering by D or b. Design and dimensions | 17.040.30 | |
| 24965 1981 | GOST 24965-81 | Double-end snap-ganges for checking internal diameter of splined shafts with straight-sided profile when centering by d. Design and dimensions | 17.040.30 | |
| 24966 1981 | GOST 24966-81 | Double-end snap-ganges for checking toth theckness of splined shafts with straight-sided profile. Design and dimensions | 17.040.30 | |
| 24967 1981 | GOST 24967-81 | Splined ganges for dimensions up to 3 min. Design and dimensions | 17.040.30 | |
| 24968 1981 | GOST 24968-81 | Splined ganges for dimensions over 3 to 18 mm. Design and dimensions | 17.040.30 | |
| 24969 1981 | GOST 24969-81 | Gauges for checking 30 deg involute splined joints. Tolerances | 17.040.30 | |
| 24997 1981 | GOST 24997-81 | [withdrawn => GOST 24997-2004]
Ganges for metric threads. Tolerances |
17.040.30 | |
| 24998 1981 | GOST 24998-81 | Ganges for tapes threads of valves and gas-bags. Tolerances | 17.040.30 | |
| 25142 1982 | GOST 25142-82 | Surface roughness. Terms and definitions | 01.040.17
17.040.20 |
|
| 25307 1982 | GOST 25307-82 | Basic norms of interchangeability. Cone joining system of limits and fits | 21.020
17.040.10 |
|
| 25346 1989 | GOST 25346-89 | Basic norms of interchangeability. Unified system of tolerances and fits. General, series of tolerances and fundamental deviations | 21.020
17.040.10 |
|
| 25347 1982 | GOST 25347-82 | Basic norms of interchangebility. Unified system of tolerances and fits. Tolerance zones and recommendable fits | 21.020
17.040.10 |
|
| 25348 1982 | GOST 25348-82 | Basic norms of interchangebility. Unified system of tolerances and fits. Series of tolerances, basic deviations and tolerance zones for sizes over 3150 mm | 21.020
17.040.10 |
|
| 25349 1988 | GOST 25349-88 | Basic norms of interchangeabiliti. Unified sistem of tolerances and fits. Tolerance zones for the plastics parts | 21.020
17.040.10 |
|
| 25575 1983 | GOST 25575-83 | Garuges for trapezaidal thread connections for casing pipes with couplings. Types, basic dimensions and tolerances | 17.040.30 | |
| 25576 1983 | GOST 25576-83 | Gauges for trapezaidal thread connections for tubing pipes with couplings. Types, basic dimensions and tolerances | 17.040.30 | |
| 25578 1983 | GOST 25578-83 | Gauges for edisons round thread main dimensions | 17.040.30 | |
| 25670 1983 | GOST 25670-83 | [withdrawn? => GOST 30893.1-2002]
Basic norms of interchangeability. Limit deviations of dimensions without tolerance indication |
21.020
17.040.10 |
|
| 25858 1983 | GOST 25858-83 | Surface density and thickness measures for radioisotope thickness gauges specifications | 17.040.30 | |
| 26179 1984 | GOST 26179-84 | Basic norms of interchangeability. Tolerances for sizes above 10000 up to 40000 mm | 21.020
17.040.10 |
|
| 27284 1987 | GOST 27284-87 | Gauge. Terms and definions | 01.040.17
17.040.30 |
|
| 27298 1987 | GOST 27298-87 | Gauges for multy-start trapezoidal thread. Tolerances | 17.040.30 | |
| 27964 1988 | GOST 27964-88 | Measurement of surface roughness parameters. Terms and definitions | 01.040.17
17.040.20 |
|
| 28094 1989 | GOST 28094-89 | Gauges for tool cir cled tread. Tolerances | 17.040.30 | |
| 28187 1989 | GOST 28187-89 | Basic norms of interchangeability. Deviations of form and position. General requirements for methods of measurements | 17.040
21.020 |
|
| 28725 1990 | GOST 28725-90 | Instruments for measuring the level of liquids and loose materials. General technical requirements and test methods | 17.040.30 | |
| 28798 1990 | GOST 28798-90 | Spring measuring heads. General specifications | 17.040.30 | |
| 30534 1997 | GOST 30534-97 | Means of measurement for linear and angular dimensions. Safety requirements and test methods | 17.040.30 | |
| 30893-01 2002 | GOST 30893.1-2002 | Basic norms of interchangeability. General tolerances. Limit deviations for linear and angular dimensions without tolerance indications | 17.040.10 | |
| 30893-02 2002 | GOST 30893.2-2002 | Basic norms of interchangeability. General tolerances. Tolerances of form and position for features without individual tolerance indications | 17.040.10 | |
| 30987 2003 | GOST 30987-2003 | Basic norms of interchangeability. Dimensioning and tolerancing for non-rigid parts | 17.040.10 | |
| 50056 1992 | GOST R 50056-92 | Basic norms of interchangeability. Depended tolerances of form, position and coordinating sizes. Bases of application | 21.020
17.040.10 |
|
| 50063 1992 | GOST R 50063-92 | Plain plug gauges, with cemented carbide, for 1 to 6. Dimensions | 17.040.30 | |
| 50064 1992 | GOST R 50064-92 | Plain snap-gauges with cemented carbide, for 3 to 180. Dimensions | 17.040.30 | |
| 50190 1992 | GOST R 50190-92 | Micrometers with inserts. Specifications | 17.040.30 | |
| 50285 1992 | GOST R 50285-92 | Plate snap-gauges for diameters from 1 to 6 mm. Dimensions | 17.040.30 | |
| 50286 1992 | GOST R 50286-92 | Plate snap-gauges for diameters from 3 to 260 mm. Dimensions | 17.040.30 | |
| 50287 1992 | GOST R 50287-92 | Plate snap-gauges with changeable lips for diameters over 100 to 360 mm. Dimensions | 17.040.30 | |
| 50288 1992 | GOST R 50288-92 | Pressed snap-gauges for diameters over 10 to 180 mm. Diameters | 17.040.30 | |
| 51066 1997 | GOST R 51066-97 | Profile survey systems of vertical shaft guides. General requirements and testing methods | 17.040.30 | |
| 51918 2002 | GOST R 51918-2002 | The equipment for care of coordinates through the vertical mine. General technical requirements and test methods | 17.040.30 | |
| 52028 2003 | GOST R 52028-2003 | Nondestructive testing. Measurement of rupture and corrosion by a superficial activation method | 17.040 | |
| 17.060 |
体積、質量、密度、粘度の測定 注: 測定器を含む 注: 石油製品及び天然ガスの計量→ 75.180.30 |
|||
| Sort | Mk | 規格番号 | 規格名称(英語) | 国際規格分類 ( ICSコードの説明 ) |
| 00004-180 1985 | GOST 4.180-85 | System of product-quality indices. Mass measures. Nomenclature of indices | 03.120
17.060 |
|
| 00008-0005 1982 | GOST 8.005-82 | State system for ensuring the uniformity of measurements. Belt-conveyer continuous weigher. Methods and means of verification | 17.060 | |
| 00008-0021 1984 | GOST 8.021-84 | [withdrawn]
State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means measuring mass |
17.060 | |
| 00008-0024 1975 | GOST 8.024-75 | State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring density of liquid | 17.060 | |
| 00008-0025 1975 | GOST 8.025-75 | State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring kinematic viscosity of liquid | 17.060 | |
| 00008-0025 1996 | GOST 8.025-96 | State system for ensuring the uniformity of measurements. State verification schedule for means measuring viscosity of liquids | 17.060 | |
| 00008-0036 1974 | GOST 8.036-74 | State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring mass of radium | 17.060 | |
| 00008-0064 1979 | GOST 8.064-79 | [withdrawn]
State system for ensuring the uniformity of measurements. The state special standard of unit of hardness on rockwell and super-rockwell scales |
17.060 | |
| 00008-0100 1973 | GOST 8.100-73 | State system for ensuring the uniformity of measurements. Volumetric glass ware, standard. Methods and means of verification | 17.060 | |
| 00008-0136 1974 | GOST 8.136-74 | State system for ensuring the uniformity of measurements. Hydraulic presses for testing building materials. Verification methods and means | 17.060
19.060 |
|
| 00008-0190 1976 | GOST 8.190-76 | State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring volume humidity content of petroleum and petroleum products | 17.060 | |
| 00008-0234 1977 | GOST 8.234-77 | State system for ensuring the uniformity of measurements. Volumetric glass ware. Methods and means of verification | 17.060 | |
| 00008-0290 1978 | GOST 8.290-78 | State system for ensuring the uniformity of measurements. BУ-type viscosimeters. Methods and means of calibration | 17.060 | |
| 00008-0346 1979 | GOST 8.346-79 | State system for ensuring the uniformity of measurements. Steel horisontal tanks. Methods and means of verification | 17.060 | |
| 00008-0368 1979 | GOST 8.368-79 | State system for ensuring the uniformity of measurements. Radioisotope density meters of liquid media and pulps. Methods and means for verification | 17.060 | |
| 00008-0400 1980 | GOST 8.400-80 | State system for ensuring the uniformity of measurements. Standard metallic gauges. Methods and means of verification | 17.060 | |
| 00008-0404 1980 | GOST 8.404-80 | State system for ensuring the uniformity of measurements. Vehicle tanks for food liquids. Methods and means of verification | 17.060
43.080.10 |
|
| 00008-0428 1981 | GOST 8.428-81 | State system for ensuring the uniformity of measurements. Areometers. The values of coefficients of surface tension of liquids | 17.060 | |
| 00008-0453 1982 | GOST 8.453-82 | State system for ensuring the uniformity of measurements. Balance for static weighting. Methods and means for verification | 17.060 | |
| 00008-0469 1982 | GOST 8.469-82 | State system for ensuring the uniformity of measurements. Scale weighers of continious action. Methods and means of verification | 17.060 | |
| 00008-0469 2002 | GOST 8.469-2002 | State system for ensuring the uniformity of measurements. Automatic continuous proportional weighers. Methods and means of verification | 17.020
17.060 |
|
| 00008-0470 1982 | GOST 8.470-82 | State system for ensuring the uniformity of measurements. State verification schedule for means of measuring volume of liquid | 17.060 | |
| 00008-0477 1982 | GOST 8.477-82 | State system for ensuring the uniformity of measurements. State verification schedule for liquid level measuring means | 17.060 | |
| 00008-0482 1983 | GOST 8.482-83 | State system for ensuring the uniformity of measurements. Glass butyrometers. Methods and means of verification | 17.060 | |
| 00008-0510 1984 | GOST 8.510-84 | State system for ensuring the uniformity of measurements. State verification schedule for means measuring (meters) volume of liquid | 17.060 | |
| 00008-0520 1984 | GOST 8.520-84 | State system of ensuring the uniformity of measurements. General purpse balances and reference balances. Rules and procedure forverification | 17.060 | |
| 00008-0523 1985 | GOST 8.523-85 | State system for ensuring the uniformity of measurements. Weighers discrete action. Calibration methods | 17.060 | |
| 00008-0537 1985 | GOST 8.537-85 | State system for ensuring the uniformity of measurements. State verification schedule for means of measuring of the surface coating density in the range of 0,001-1,000 kg/m2 | 17.060 | |
| 00008-0569 1998 | GOST R 8.569-98 | State system for ensuring the uniformity of measurements. Vehicle tanks for oil product liquids. Methods of verification | 17.060
75.180.30 |
|
| 00008-0598 2003 | GOST R 8.598-2003 | State system for ensuring the uniformity of measurements. Weighbridges for weighing of cinder vehicles in motion. Verification procedure | 17.020
17.060 |
|
| 00008-0603 2003 | GOST R 8.603-2003 | State system for ensuring the uniformity of measurements. Weighbridges for weighing of road vehicles in motion. Verification procedure | 17.020
17.060 |
|
| 01440 1978 | GOST 1440-78 | Instruments for determination of petroleum products penetration. General specifications | 17.060 | |
| 01532 | GOST 1532-81 | Viscosimeters of relative viscosity. Specifications | 17.060 | |
| 01594 1969 | GOST 1594-69 | Apparatus for quantitative determination of water content in petroleum, food and other products. Specifications | 17.060 | |
| 02939 1963 | GOST 2939-63 | Gases. Conditions for the determination of volume | 17.060 | |
| 04680 1949 | GOST 4680-49 | Mass recalculation method for non-standard hymidity hygroscopic materials and products | 17.060 | |
| 06859 1972 | GOST 6859-72 | Apparatus for liquids sampling and measuring. Specifications | 17.060
71.040.10 |
|
| 07328 1982 | GOST 7328-82 | Weights of general application. Specifications | 17.060 | |
| 07328 2001 | GOST 7328-2001 | Weights. General specifications | 17.060 | |
| 09070 1975 | GOST 9070-75 | Viscosimeters for determination of relative viscosity of paint and lacquer materials. Specifications | 17.060 | |
| 09509 1974 | GOST 9509-74 | Scales and dosimeters. Knifeedges and bearings of steel. General requirements | 17.060 | |
| 10028 1981 | GOST 10028-81 | Glass capillary viscosimeters. Specifications | 17.060 | |
| 10223 1982 | GOST 10223-82 | Scale weighers of proportioning action scales and scale weighers of continuous action. General technical requirements | 17.060 | |
| 10223 1997 | GOST 10223-97 | Gravimetric filling instruments. General technical requirements | 17.060 | |
| 10708 1982 | GOST 10708-82 | Pendulum impactors. Specifications | 17.060
19.060 |
|
| 13005 1967 | GOST 13005-67 | Interferometers for determination of liqnid and gas concentration. Methods and means for verification | 17.060 | |
| 13591 1968 | GOST 13591-68 | Potatoprobe weight. Methods and means of verification | 17.060
17.020 |
|
| 13675 1968 | GOST 13675-68 | Butterprobe weight. Methods and means of verification | 17.060
17.020 |
|
| 13697 1968 | GOST 13697-68 | Milk meters. Methods and means of verification | 17.060
17.020 |
|
| 13718 | GOST 13718-68 | Forque (torsional) balances. Methods and means of verification | 17.060
17.020 |
|
| 13844 1968 | GOST 13844-68 | Technical metallic gauges. Methods and means of verification | 17.060
17.020 |
|
| 14004 | GOST 14004-68 | Lever balance of general use. Limits of weighing. Norms of accuracy | 17.060 | |
| 14895 1969 | GOST 14895-69 | Standard weightbridge. Methods and means of verification | 17.060 | |
| 14941 1984 | GOST 14941-84 | Composition and properties refractometer transmitters of liquides ssi | 17.060 | |
| 16464 1970 | GOST 16464-70 | Operating litre measuring vessels. Basic parameters and dimensions. Technical requirements | 17.060 | |
| 18481 1981 | GOST 18481-81 | Glass hydrometers and cylinders. General specifications | 17.060 | |
| 20180 1991 | GOST 20180-91 | Radioizotope densitometers for liquid and pulp measuring. General specifications | 17.060 | |
| 21497 1990 | GOST 21497-90 | Radioisotope level gauges. General specifications | 17.060 | |
| 22524 1977 | GOST 22524-77 | Glass density bottles. Specifications | 17.060 | |
| 23094 1978 | GOST 23094-78 | Glass butyrometers. General specifications | 17.060 | |
| 24104 1988 | GOST 24104-88 | General purpose laboratory balances and comparison balances. Performance. Specifications | 17.060 | |
| 24104 2001 | GOST 24104-2001 | Laboratory scales. General technical requirements | 17.060 | |
| 24619 1981 | GOST 24619-81 | Scale weighers of proportioning action, scales and scale weighers of continuous action. Capacity limits. Metrological parameters | 17.060 | |
| 24802 1981 | GOST 24802-81 | Level meters for liquid and solids. Terms and definitions | 01.040.17
17.060 |
|
| 27735 1994 | GOST 27735-94 | Domestic scales. General technical requirements | 17.060 | |
| 28947 1991 | GOST 28947-91 | Glass Hydrometers. Conventional value for tne thermal cubic expasion coefficient (for use in tne preparation of measurement table for liquids) | 17.060 | |
| 29226 1991 | GOST 29226-91 | Viscosimeters of liquid. General technical requirements and testing methods | 17.060 | |
| 29329 | GOST 29329-92 | Balance for static weighing. General requirements | 17.060 | |
| 30124 1994 | GOST 30124-94 | Scales and scale weighers of continious action. General technical requirements | 17.060 | |
| 30414 1996 | GOST 30414-96 | Weighbridges for in motion weighing of vehicles. General technical requirements | 17.060 | |
| 50205 1992 | GOST R 50205-92 | Analytical gas chromatographs. Specifications and testing methods | 17.060
71.040.50 |
|
| 51945 2002 | GOST R 51945-2002 | Aspirators. General specifications | 17.060
13.040 |
|
| 52319 2005 | GOST R 52319-2005 | Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 1. General requirements | 11.080
17.060 17.080 17.100 17.120 17.120.01 17.200.20 17.220 17.220.20 |
|
| 17.080 |
時間、速度、加速度、角速度の測定 注: 測定器を含む 注: 時間測定器→ 39.040 |
|||
| Sort | Mk | 規格番号 | 規格名称(英語) | 国際規格分類 ( ICSコードの説明 ) |
| 00008-0129 1983 | GOST 8.129-83 | State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means measuring time and frequency | 17.080 | |
| 00008-0129 1999 | GOST 8.129-99 | State system for ensuring the uniformity of measurements. State verification schedule for means measuring time and frequency | 17.080 | |
| 00008-0137 1984 | GOST 8.137-84 | State system for ensuring the uniformity measurements. State special standard and all-union verification schedule for means measuring acceleration in shock motion | 17.080 | |
| 00008-0179 1976 | GOST 8.179-76 | State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means of measurements of constant linear acceleration of a solid body in the range from 10in minus 3 degree up to 2x10 in 2 degree m/s'2 | 17.080 | |
| 00008-0262 1977 | GOST 8.262-77 | State system for ensuring the uniformity of measurements. Autocar and cycle speedometers. Verification methods and means | 17.080 | |
| 00008-0281 1978 | GOST 8.281-78 | State system for ensuring the uniformity of measurements. Locomotive speedometers. Methods and means of calibration | 17.080 | |
| 00008-0285 1978 | GOST 8.285-78 | State system for ensuring the uniformity of measurements. Tachometers. Methods and means of verification | 17.080 | |
| 00008-0288 1978 | GOST 8.288-78 | State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means of measring the angular velocity in the range of 5x10 in minus 8 degree up to 2,5x10 in minus 4 degree rad/s | 17.080 | |
| 00008-0289 1978 | GOST 8.289-78 | State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means of measurement of constant angular acceleration within the range of 1 up to 100 rad/s2 | 17.080 | |
| 00008-0291 1978 | GOST 8.291-78 | State system for ensuring the uniformity of measurements. Taximeters. Methods and mean verification | 17.080 | |
| 00008-0441 1981 | GOST 8.441-81 | State system of ensuring the unity of measurements. Actual high precision measures of frequency and time. Methods and means of verification | 17.080
17.020 |
|
| 00008-0476 1982 | GOST 8.476-82 | State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring linear accelerometers in the range of frequencies from 0.5 to 30Hz | 17.080 | |
| 00008-0515 1984 | GOST 8.515-84 | State system of ensuring the uniformity of measurements. Standard time and frequecy signals radiated by specialized radio stations of the State time and freqency service of the USSR. Time code | 17.080 | |
| 00008-0567 1999 | GOST 8.567-99 | State system for ensuring the uniformity of measurements. Time and frequency maesurements. Terms and definitions | 01.040.17
17.080 |
|
| 00008-0577 2002 | GOST 8.577-2002 | State system for ensuring the uniformity of measurements. State verification schedule for means measuring linear accelerations and plane angle for angle displacement of a solid body | 17.080 | |
| 01578 1976 | GOST 1578-76 | Speedometers with flexible shaft drive for autocars and cycles. General technical specifications | 17.080 | |
| 15855 1977 | GOST 15855-77 | Time and frequency measurements. Terms and definitions | 01.040.17
17.080 |
|
| 18303 1972 | GOST 18303-72 | Tachometers. Terms and definitions | 01.040.17
17.080 |
|
| 18426 1973 | GOST 18426-73 | Taximeters automobile. General specification | 17.080 | |
| 18955 1973 | GOST 18955-73 | Linear low frequency accelerometers. Terms and definitions | 01.040.17
17.080 |
|
| 21339 1982 | GOST 21339-82 | Tachometers. General specifications | 17.080 | |
| 23213 1984 | GOST 23213-84 | Speedometers for locomotives. General specifications | 17.080 | |
| 24907 1993 | GOST 24907-93 | Revolts counters and units counters. Specifications. Testing methods | 17.080 | |
| 27576 1987 | GOST 27576-87 | State automized technical stability system of unified time. Information carriers in loral chronometric system | 17.080 | |
| 50413 1992 | GOST R 50413-92 | Revolts counters and units counters. Specifications. Testing methods | 17.080 | |
| 50856 1996 | GOST R 50856-96 | Rodar meters of the speed of vehicles. Basic technical requirements. Methods of tests | 17.080 | |
| 52319 2005 | GOST R 52319-2005 | Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 1. General requirements | 11.080
17.060 17.080 17.100 17.120 17.120.01 17.200.20 17.220 17.220.20 |
|
| 17.100 |
力、重さ及び圧力の測定 注: 測定器を含む |
|||
| Sort | Mk | 規格番号 | 規格名称(英語) | 国際規格分類 ( ICSコードの説明 ) |
| 00004-058 1985 | GOST 4.58-85 | System of product quality indices. Pressure gauges, vacuum gauges, pressure-and-vacuum gauges, braught gauges, head gauges, draught-and-head gauges. Nomenclature of indices | 03.120
17.100 |
|
| 00004-135 1985 | GOST 4.135-85 | System of product quality indices. Differential pressure gauges. Nomenclature of indices | 03.120
17.100 |
|
| 00004-386 1985 | GOST 4.386-85 | Product-quality index system. Surface gravimeters. Index nomenclature | 03.120
17.100 |
|
| 00008-0005 2002 | GOST 8.005-2002 | State system for ensuring the uniformity of measurements. Continuous conveyer balance. Methods and means of verification | 17.100 | |
| 00008-0017 1979 | GOST 8.017-79 | State system for ensuring the uniformity of measurements. State primar standard and all-union verification schedule for means measuring pressure up to 250 MPa | 17.100 | |
| 00008-0052 1973 | GOST 8.052-73 | State system for ensuring the uniformity of measurements. Differential pressure gauges with pneumatic output. Verification methods and means | 17.100 | |
| 00008-0053 1973 | GOST 8.053-73 | State system for ensuring the uniformity of measurements. Pressure, combined pressure-vacuum, vacuum, gauges and draught gauges with pneumatic output signals. Methods of verification | 17.100 | |
| 00008-0065 1973 | GOST 8.065-73 | State system for ensuring the uniformity of measurements. The state primary standard of unit of force | 17.100 | |
| 00008-0065 1985 | GOST 8.065-85 | State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for force measuring instruments | 17.100 | |
| 00008-0092 1973 | GOST 8.092-73 | State system for ensuring the uniformity of measurements. Pressure gauges, vacuum pressure gauges, vacuum manometers, draught gauges, delivery head meters and draught head gauges with unified electric (current) output signals. Methods and means of verification | 17.100 | |
| 00008-0094 1973 | GOST 8.094-73 | State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means, measuring pressure with upper limits from 10000x10 in 5 degree up to 40000x10 in 5 degree Pa | 17.100 | |
| 00008-0096 1982 | GOST 8.096-82 | State system for ensuring the uniformity of measurements. The 1-st order micromanometers of МКМ-type. Methods and means of verification | 17.100 | |
| 00008-0107 1981 | GOST 8.107-81 | State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring absolute pressure within the range of 1x10 in minus 8 degree up to 1x10 in 3 degree Pa | 17.100 | |
| 00008-0111 1974 | GOST 8.111-74 | The state system for ensuring the uniformity of measurements. Dead-weight compaund pressure and vacuum gauges, МВП-2,5 type . Verification methods and means | 17.100 | |
| 00008-0146 1975 | GOST 8.146-75 | State system for ensuring the uniformity of measurements. Indicating and recording pressure gauge with integrator of SSI. Methods of verification | 17.100 | |
| 00008-0187 1976 | GOST 8.187-76 | State system for ensuring the uniformity of measurements. The state special standard and all-union verification schedule for means of measurements of the difference of pressures up to 4x10 in 4 degree Pa | 17.100 | |
| 00008-0223 1976 | GOST 8.223-76 | State system for ensuring the uniformity of measurements. State special standard and all-union verification for means measuring absolute pressure within the range of 2,7x10 in 2 degree to 4000x10 in 2 degree Pa | 17.100 | |
| 00008-0240 1977 | GOST 8.240-77 | State system for ensuring the uniformity of measurements. Measuring transducers for pressure differences with unified current output signals of the SSI. Methods and means of verification | 17.100 | |
| 00008-0243 1977 | GOST 8.243-77 | State system for ensuring the uniformity of measurements. Measuring transducers for pressure differences with unified mutual inductance output parameters of the SSI. Methods and means of verification | 17.100 | |
| 00008-0287 1978 | GOST 8.287-78 | State system for ensuring the uniformity of measurements. Standard portable dynamometers of the 3-rd grade. Methods and means of calibration | 17.100 | |
| 00008-0302 1978 | GOST 8.302-78 | State system for ensuring the uniformity of measurements. Compensated fluid micromanometers with micrometric screw, type МКВ-250 . Methods and means of verification | 17.100 | |
| 00008-0340 1978 | GOST 8.340-78 | State system for ensuring the uniformity of measurements. Dead-weight tester type МП-0,4 methods and means of verification | 17.100 | |
| 00008-0425 1981 | GOST 8.425-81 | State system for ensuring the uniformity of measurements. Machines for testing metal fatigue. Methods and means for verification | 17.100
77.040.10 |
|
| 00008-0433 1981 | GOST 8.433-81 | State system for ensuring the uniformity of measurements. State special standard and state hierarchy diagram for variable pressure measuring instruments in the range of 1x10 in 2 degree to 1x10 in 6 degree Pa for frequences of 5x10 in minus 2 degree to 1x10 in 4 degree Hz, durations from 1x10 in minus 5 degree to 10 s under constant pressure up to 5x10 in 6 degree Pa | 17.100 | |
| 00008-0479 1982 | GOST 8.479-82 | State system for ensuring the uniformity of measurements. Piston pressure gauges. Methods and means of verification | 17.100 | |
| 00008-0501 1984 | GOST 8.501-84 | State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means of measuring instruments of periodical pressure over the range 1-250 MPa at frequencies up to 10 kHz | 17.100 | |
| 00008-0541 1986 | GOST 8.541-86 | State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means measuring torque of force | 17.100 | |
| 01701 1975 | GOST 1701-75 | Automobile pressure gauges and automotive pressure indicators. General specifications | 17.100 | |
| 02405 1988 | GOST 2405-88 | Pressure gauges, vacuum gauges, pressure-and-vacuum gauges, draught gauges and draught-and-pressure gauges. General specifications | 17.100 | |
| 03779 1955 | GOST 3779-55 | Copper sticks for crushers | 17.100 | |
| 08291 1983 | GOST 8291-83 | Dead-weight preassure-gauge testers. General technical requirements | 17.100 | |
| 09500 1984 | GOST 9500-84 | Standard dynamometers portable. General specifications | 19.060
17.100 |
|
| 09921 1981 | GOST 9921-81 | Tyre hand-operated manometers. General specifications | 17.100 | |
| 09933 1975 | GOST 9933-75 | Absolute pressure gauges and u-tubes combined pressure vacuum gauges | 17.100 | |
| 13717 1984 | GOST 13717-84 | Indicating manometric-action instruments with electric contacts. General specifications | 17.100 | |
| 13782 1968 | GOST 13782-68 | General-purpose spring dynamometers. Methods and means of verification | 17.100
17.020 |
|
| 13837 | GOST 13837-79 | General-purpose dynamometers. Specifications | 19.060
17.100 |
|
| 14010 1974 | GOST 14010-74 | Pickup-pressure and differencial switches ssi | 17.100 | |
| 14017 1968 | GOST 14017-68 | State system for ensuring the uniformity of measurements. Force-measuring standard machines of 2 grade. Methods and means of verification | 17.100
17.020 |
|
| 18140 1984 | GOST 18140-84 | SSI differential pressure gauges . General specifications | 17.100 | |
| 22520 1985 | GOST 22520-85 | Pressure, vacuum and pressure difference transmitters with electrical analog output signals, SSI. General specifications | 17.100 | |
| 22521 1985 | GOST 22521-85 | Pressure, vacuum and pressure difference transmitters with pneumatic analog output signal, SSI. General specifications | 17.100 | |
| 22725 1977 | GOST 22725-77 | Reference high pressure manganin gauges. Technical requirements | 17.100 | |
| 25864 1983 | GOST 25864-83 | Force measuring standard machines of 2 grade. General technical requirements | 19.060
17.100 |
|
| 26969 1986 | GOST 26969-86 | Standard orifice plates for flowmeters. Specifications | 17.100 | |
| 27758 1988 | GOST 27758-88 | The vacuum gauges. Type. General technical requirements | 17.100 | |
| 28836 1990 | GOST 28836-90 | Strain gauge load cells. General technical requirements and testings methods | 19.060
17.100 |
|
| 30129 1996 | GOST 30129-96 | Scale load cells. General technical requirements | 17.100 | |
| 52319 2005 | GOST R 52319-2005 | Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 1. General requirements | 11.080
17.060 17.080 17.100 17.120 17.120.01 17.200.20 17.220 17.220.20 |
|
| 17.120 |
流量の測定 注: 測定器及び設備を含む。 |
|||
| Sort | Mk | 規格番号 | 規格名称(英語) | 国際規格分類 ( ICSコードの説明 ) |
| 00004-158 1985 | GOST 4.158-85 | System of product-quality indices. Volumetric, velocity counters, batchmeters and flowmeters. Electromagnetic flowmeters. Vortex flowmeters, batchmeters and metering plants. Nomenclature of indices | 03.120
17.120 |
|
| 00008-0122 1985 | GOST 8.122-85 | State system for ensuring the uniformity of measurements. Rotameters. Methods of verifications | 17.120.10
17.020 |
|
| 00008-0142 1975 | GOST 8.142-75 | State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring mass flow of liquid within the range of 1x10 in minus 3 degree up to 2x10 in 3 degree kg/s | 17.120 | |
| 00008-0143 1975 | GOST 8.143-75 | State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring volumetric flow of gas within the range of 1x10 in minus 6 up to 1x10 in 2 degree m3/s | 17.120 | |
| 00008-0145 1975 | GOST 8.145-75 | State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring volumetric flow of liquids within the range of 3x10 in minus 6 degree up to 10 m3/sec | 17.120 | |
| 00008-0156 1983 | GOST 8.156-83 | State system for ensuring the uniformity of measurements. Cold water meters. Verification methods and means | 17.120
91.140.60 |
|
| 00008-0220 1976 | GOST 8.220-76 | State system for ensuring the uniformity of measurements. Oil dispensing pumps. Verification methods and means | 17.120 | |
| 00008-0247 1977 | GOST 8.247-77 | [withdrawn => GOST 8.247-2004]
State system for ensuring the uniformity of measurement. Sounding stick for oil product level measuring in transport and stationary reservoirs. Methods and means of verification |
17.120
75.180.30 |
|
| 00008-0252 1977 | GOST 8.252-77 | State system for ensuring the uniformity of measurements. Tachometric ball flowmeters. Methods and means for verification | 17.120 | |
| 00008-0320 1978 | GOST 8.320-78 | State system for ensuring the uniformity of measurements. Flowmeter electromagnetic industry. Methods and means for verification | 17.120 | |
| 00008-0324 1978 | GOST 8.324-78 | State system for ensuring the uniformity of measurements. Gas meters. Verification methods and means | 17.120
91.140.40 |
|
| 00008-0361 1979 | GOST 8.361-79 | State system for ensuring the uniformity of measurements. Technique of measuring by the velocity at a single point of a pipe cross-section | 17.120 | |
| 00008-0364 1979 | GOST 8.364-79 | State system of ensuring the uniformity of measurements. Trade measuring automats for delivery of liquid food products. Methods and means of verification | 17.120
55.230 |
|
| 00008-0369 1979 | GOST 8.369-79 | State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring mass flow of gas within the range of 4x10 in minus 2 degree up to 2,5x10 in 2 degree kg/sec | 17.120 | |
| 00008-0373 1980 | GOST 8.373-80 | State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring volumetric flow of petroleum products within the range of 2,8x10in minus 6 degree up to 2,8x10 in minus 2 degree m3/sec | 17.120 | |
| 00008-0374 1980 | GOST 8.374-80 | State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring volumetric flow of water within the range of 2,8x10 in minus 8 degree up to 2,8x10 in minus 2 degree m3/sec | 17.120 | |
| 00008-0407 1980 | GOST 8.407-80 | State system for ensuring the uniformity of measurements incompressible liquid flowmeters. Standardizes metrological characteristics | 17.120 | |
| 00008-0439 1981 | GOST 8.439-81 | State system for ensuring the uniformity of measurements. Water flow rate in closed conduits. Technique of measuring by velocity-area method | 17.120 | |
| 00008-0451 1981 | GOST 8.451-81 | State system of ensuring the uniformity of measurements. Positive displacement liquid meters. Methods and means for verification | 17.120 | |
| 00008-0464 1982 | GOST 8.464-82 | State system for ensuring the uniformity of measurements. Gas mass flow rate. Calculated relations of indirect methods of measurements | 17.120 | |
| 00008-0486 1983 | GOST 8.486-83 | State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means of measuring the velocity of water flow in the range of 0.005-25 m/s | 17.120 | |
| 00008-0542 1986 | GOST 8.542-86 | State system for ensuring the uniformity of measurements. State verification schedule for means of measuring the velocity of air flow | 17.120 | |
| 00008-0563-01 1997 | GOST 8.563.1-97 | State system for ensuring the uniformity of measurements. Measurement of liquids and gases flow rate and quantity by differential pressure method. Orifice plates, nozzles ISA 1932 and Venturi tubes inserted in circular cross-section filled conduits. Specifications | 17.120 | |
| 00008-0563-02 1997 | GOST 8.563.2-97 | State system for ensuring the uniformity of measurements. Measurement of liquids and gases flow rate and quantity by differential pressure method. Measurement procedure by orifice instruments | 17.120 | |
| 00008-0563-03 1997 | GOST 8.563.3-97 | State system for ensuring the uniformity of measurements. Measurement of liquids and gases flow rate and quantity by differential pressure method. Procedure and module of calculations. Software | 17.120 | |
| 06019 1983 | GOST 6019-83 | Impeller counters for cold water. General specifications | 17.120
91.140.60 |
|
| 06376 1974 | GOST 6376-74 | Hand anemometer accounting device. Specifications | 17.120 | |
| 07193 1974 | GOST 7193-74 | Hand induction anemometer. Specifications | 17.120 | |
| 09932 1975 | GOST 9932-75 | Laboratory glass flowmeters. Specifications | 17.120 | |
| 11881 1976 | GOST 11881-76 | Controllers acting without an independent energy source, SSI. General specifications | 25.040.40
17.120 |
|
| 13045 1981 | GOST 13045-81 | General industrial rotameters. General specifications | 17.120 | |
| 14167 1983 | GOST 14167-83 | Turbine meters for cold water. Specifications | 17.120
91.140.60 |
|
| 15126 1980 | GOST 15126-80 | Water flow rate measuring instruments. Fluvial hydrometric curremt meters. General technical requirements | 17.120 | |
| 15528 1986 | GOST 15528-86 | Instruments for measuring flowrate, volume or mass of flowing fluid and gas. Terms and definitions | 01.040.17
17.120 |
|
| 21482 1976 | GOST 21482-76 | Single-layer measuring metal bellows. Specifications | 17.120 | |
| 21557 1983 | GOST 21557-83 | The bushings and rings for metallic bellows. General specifications | 17.120 | |
| 22616 1977 | GOST 22616-77 | Vortex tubes. Terms and definitions | 01.040.17
17.120.10 |
|
| 23720 1979 | GOST 23720-79 | Venturi tubes. Specifications | 17.120 | |
| 25668 1983 | GOST 25668-83 | Flowmetres. Basic parametres | 17.120 | |
| 25855 1983 | GOST 25855-83 | Lebel and discharge of surface waters. General requirements for measurement | 17.120 | |
| 28066 1989 | GOST 28066-89 | SSI. Positive displacement liquid maters. General specifications | 17.120 | |
| 28723 1990 | GOST 28723-90 | Velocity electromagnetic and vortex flowmeters. General technical requirements and test methods | 17.120 | |
| 28724 1990 | GOST 28724-90 | Velocity gas meters. General technical requirements and test methods | 17.120 | |
| 50193-01 1992 | GOST R 50193.1-92 | Measurement of water flow in closed conduits. Meters for cold potable water. Specifications | 17.120.10
91.140.60 |
|
| 50193-02 1992 | GOST R 50193.2-92 | Measurement of water flow in closed conduits. Meters for cold potable water. Installation requirements | 17.120.10
91.140.60 |
|
| 50193-03 1992 | GOST R 50193.3-92 | Measurement of water flow in closed conduits. Meters for cold potable water. Test methods and equipment | 17.120.10
91.140.60 |
|
| 50601 1993 | GOST R 50601-93 | Impeller counters for potable water. General specifications | 17.120
91.140.60 |
|
| 50818 1995 | GOST R 50818-95 | Gas motors volumetric. General technical requirements and test methods | 17.120.10
91.140.40 |
|
| 51657-00 2000 | GOST R 51657.0-2000 | Water flow measurement in hydromelioration and water economics systems. Basic principles | 17.120 | |
| 51657-02 2000 | GOST R 51657.2-2000 | Water flow measurement in hydromelioration and water economics systems. Methods of water flow measurement. Classification | 17.120 | |
| 51657-03 2000 | GOST R 51657.3-2000 | Water flow measurement in hydromelioration and water economics system. Flow gauging structures. Classification | 17.120 | |
| 51657-04 2002 | GOST R 51657.4-2002 | Water flow measurement in hydromelioration and water supply systems. Water discharge measurement in open channels by triangular profile weirs. General technical requirements | 17.120
93.160 |
|
| 51657-05 2002 | GOST R 51657.5-2002 | Water flow measurement in hydromelioration and water sypply systems. Manner of measurement of water discharge using the ultrasonic (acoustic) velocity meters. General technical requirements | 17.120
93.160 |
|
| 52319 2005 | GOST R 52319-2005 | Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 1. General requirements | 11.080
17.060 17.080 17.100 17.120 17.120.01 17.200.20 17.220 17.220.20 |
|
| ED1 21482 1987 | GOST ED1 21482-87 | Single - layer measuring metal bellows. Specifications | 17.120 | |
| 17.140 |
音響及び音響測定 注: 測定器及び試験装置を含む。 注: 騒音(環境問題)→ 13.140 注: 建物における音響問題→ 91.120.20 |
|||
| Sort | Mk | 規格番号 | 規格名称(英語) | 国際規格分類 ( ICSコードの説明 ) |
| 00002-741 1968 | GOST 2.741-68 | Unified system of design documentation. Graphical sumbols in diagrams. Acoustic devices | 01.080.40
17.140 |
|
| 00008-0038 1975 | GOST 8.038-75 | State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring pressure in the air | 17.140 | |
| 00008-0038 1994 | GOST 8.038-94 | State system for ensuring the uniformity of measurements. State verification schedule for means measuring the airborne sound pressure in the frequencys range 2 Hr -100 kHr | 17.140 | |
| 00008-0153 1975 | GOST 8.153-75 | State system of ensuring the uniformity of measurement. Measuring condenser microphones. Methods and means of verification | 17.140.50 | |
| 00008-0154 1975 | GOST 8.154-75 | State system for ensuring the uniformity of measurements. "Artifical ear"-type measuring instruments. Methods and means of verification | 17.140.50 | |
| 00008-0233 1977 | GOST 8.233-77 | State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for measuring means of sound pressure in water medium of frequency range 0,01-1 hz | 17.140 | |
| 00008-0257 1984 | GOST 8.257-84 | State system for ensuring the uniformity of measurements. Sound level meters. Calibration methods | 17.140.50 | |
| 00008-0475 1982 | GOST 8.475-82 | State system for ensuring the uniformity of measurements. Standard noise figure and equivalent noise temperature of amplifiers and receivers. Measurement procedure | 17.140.01 | |
| 00008-0555 1991 | GOST 8.555-91 | Characteristics and calibration of hydrophones for operation in the frequency range 0,5 MHz to 15 MHz | 17.140.50 | |
| 00012-01-001 1989 | GOST 12.1.001-89 | Occupational safety standarts sustem. Ultrasound. General safety requirements | 13.140
17.140 |
|
| 00012-02-016-01 1991 | GOST 12.2.016.1-91 | Occurational safety standards system. Compressing equipment. Determination of noise characteristics. General requirments | 17.140.20
23.140 13.140 |
|
| 00012-02-016-02 1991 | GOST 12.2.016.2-91 | Occupational safety standards system. CoMpression equipment. Noise characteristics determination method of stationary compressor sets | 17.140.20
23.140 13.140 |
|
| 00012-02-016-03 1991 | GOST 12.2.016.3-91 | Occupational safety standards system. Compressing equipment. Determination method of noise characteristics of mobile compressor stations | 17.140.20
23.140 13.140 |
|
| 00012-02-016-04 1991 | GOST 12.2.016.4-91 | Occupational safety standards system. Compressing equipment. Determination method of noise characteristics of stationary compressor stations and installations | 17.140.20
23.140 13.140 |
|
| 00012-02-016-05 1991 | GOST 12.2.016.5-91 | Occupational safety standards system. Compressing equipment. Noise characteristics and antinoise protection. Lay-out ( composition, formulation, contents ) of technical documentation | 17.140.20
23.140 13.140 |
|
| 00012-02-030 2000 | GOST 12.2.030-2000 | Occupational safety standards system. Hand tools. Noise characteristics. Limits. Methods of testing | 17.140.20 | |
| 00012-02-110 1985 | GOST 12.2.110-85 | Occupational safety standards systems. General-purpose stationary air piston compressors. Norms and methods for determination of noise characteristics | 17.140.20
23.140 13.140 |
|
| 00017-02-04-04 1982 | GOST 17.2.4.04-82 | Nature protection. Atmosphere. Rating of ambient noise characteristics of inland and coastwise navigation ships | 17.140.30
13.140 |
|
| 00025-002 1980 | GOST 25.002-80 | Acoustic emission. Terms, definitions and symbols | 01.040.17
17.140 |
|
| 10893 1987 | GOST 10893-87 | Electronic hearing aids. General specifications | 17.140.50 | |
| 11948 1978 | GOST 11948-78 | Devices for measurement of detonation velocity oscilation and parasitic amplitude modulation factors for sound recording and reproduction apparatus. Technical requirements and test methods | 17.140 | |
| 12090 1980 | GOST 12090-80 | Frequencies for acoustic measurements. Prefered rows | 33.140
17.140 |
|
| 16372 1993 | GOST 16372-93 | Rotating electric machines. Limiting values of noise levels | 17.140.20
29.160.01 |
|
| 17187 1981 | GOST 17187-81 | Sound level meters. General technical requirementsand methods of testing | 17.140.50 | |
| 17228 1987 | GOST 17228-87 | Passanger and transport acroplanes. Acceptable noise levels on ground | 49.020
17.140.30 |
|
| 17229 1985 | GOST 17229-85 | Passanger and transport aeroplanes. Determination of noise levels on ground | 49.020
17.140.30 |
|
| 20444 1985 | GOST 20444-85 | Noise. Traffic flows. Methods of noise characteristic measurement | 17.140.30 | |
| 22547 1981 | GOST 22547-81 | Sonar equipments. Terms and definitions | 01.040.17
17.140 |
|
| 23023 1985 | GOST 23023-85 | Light-weight propeller aeroplanes. Acceptable noise levels on ground and methods for its determination | 49.020
13.140 17.140.30 |
|
| 23337 1978 | GOST 23337-78 | Noise. Methods of noise measurement in residential areas and in the rooms of residential, public and community buildings | 17.140.01
91.120.20 |
|
| 23426 1979 | GOST 23426-79 | Noise. Methods of measurement of sound insulation by operators shelters or remote control cobins in industrial buildings | 17.140.01
91.120.20 |
|
| 23552 1979 | GOST 23552-79 | Civil aviation. Permissible levels of sound shock intensity on the ground and measurinng methods | 49.020
17.140.30 13.140 |
|
| 23628 1979 | GOST 23628-79 | Noise. Methods of measurement of sound insulation by acoustic hoods | 17.140.01 | |
| 23941 1979 | GOST 23941-79 | Noise. Methods of determinations of noise characteristics. General requirements | 17.140.20 | |
| 23941 2002 | GOST 23941-2002 | Noise of machines. Methods for determination of noise characteristics. General requirements | 17.140.20 | |
| 24146 | GOST 24146-89 | Auditoria. Method of measurement of reverberation time | 17.140.01
91.120.20 |
|
| 24646 1981 | GOST 24646-81 | Transport supersonics aircrafts. Acceptable noise levels on the ground and method of noise level determination | 49.020
13.140 17.140.30 |
|
| 24647 1991 | GOST 24647-91 | Helicopters of civil aviation. Acceptable noise levels and methods of noise level determination on the ground | 49.020
13.140 17.140.30 |
|
| 24659 1981 | GOST 24659-81 | Short take off and landing aircrafts. Acceptable noise levels on the ground and method of noise level determination | 49.020
13.140 17.140.30 |
|
| 26918 1986 | GOST 26918-86 | Noise. Noise-measuring techniques for railway transport | 17.140.30 | |
| 27243 1987 | GOST 27243-87 | [withdrawn]
Noise. Survey method for the determination of sound powder levels of machinery by standard noise source |
17.140.20 | |
| 27243 2005 | GOST 27243-2005 | Noise of machines. Determination of sound power levels using sound pressure. Comparison method in situ | 17.140.20 | |
| 27407 1987 | GOST 27407-87 | Piston opposite compressors. Acceptable levels and methods of determination of noise characteristics | 23.140
17.140.20 |
|
| 27408 1987 | GOST 27408-87 | Noise. Methods forstatistical processing of data in determination and control of machineemitted noise levels | 17.140.20 | |
| 27409 1987 | GOST 27409-87 | Regulation of stationary equipment noise characteristics. Basic standartization | 17.140.20 | |
| 27409 1997 | GOST 27409-97 | Noise. Technical regulation of stationary equipment noise characteristics. General | 17.140.20 | |
| 27534 1987 | GOST 27534-87 | Acoustics. Measuremeet of airborne noise emitted by earth-moving machinery. Operator's position. Stationary test condition | 17.140.20
53.100 |
|
| 27655 1988 | GOST 27655-88 | Acoustic emission. Terms, definitions and symbols | 01.040.17
17.140 |
|
| 27717 1988 | GOST 27717-88 | Acoustics. Measurement of airborne noise emitted by earth-moving machinery. Method for determining compliance with limits for extorior noise. Stationary test cordition | 17.140.20
53.100 |
|
| 27955 1988 | GOST 27955-88 | Ultrasonic magnetostrictive transducers. Methods of measuring characteristics | 17.140.50 | |
| 28975 1991 | GOST 28975-91 | Acoustics. Measurements of exterior noise emitted by earth-moving machinery. Dynamic test condition | 17.140.20
53.100 |
|
| 30163-00 1995 | GOST 30163.0-95 | Household and similar electrical appliances. Test code for determination of airborne noise. Part 1. General requirements | 97.030
17.140.20 97.180 |
|
| 30163-02 1996 | GOST 30163.2-96 | Hausehold and similar electrical appliances. Test code for determination of airborne. Part 2. Particular requierments for dishwachers | 17.140.20
97.040.40 |
|
| 30163-03 1999 | GOST 30163.3-99 | Household and similar electrical appliances. Test code for the determination of aiborne acoustical noise. Part 2. Particular requirements for washing machines and spin extractors | 97.060
17.140.20 |
|
| 30457 1997 | GOST 30457-97 | Acoustics. Determination of sound power levels of noise sources using sound intensity. Measurement at discrete points. Engineering method | 17.140 | |
| 30530 1997 | GOST 30530-97 | Noise. Methods for calculation of limit admissible nose characteristics of stationary machines | 17.140.20 | |
| 30683 2000 | GOST 30683-2000 | Noise of machines. Measurement of emission sound pressure levels at a work station and at other specified positions. Method requiring environmental corrections | 17.140.20 | |
| 30690 2000 | GOST 30690-2000 | Removable acoustical screens. Methods for determination of the in situ sound attenuation | 17.140.20 | |
| 30691 2001 | GOST 30691-2001 | Noise of machines. Declaration and verification of noise emission values | 17.140.20 | |
| 30720 2001 | GOST 30720-2001 | Noise of machines. Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level | 17.140.20 | |
| 31169 2003 | GOST 31169-2003 | Noise of machines. Measurement of emission sound pressure levels at a work station and at other specified positions. Survey method in situ | 17.140.20 | |
| 31170 2004 | GOST 31170-2004 | Vibration and noise of machines. Vibration, noise and force characteristics of marine machines and marine equipment subject to declaration and verification by testing at supplier-factory's stands | 17.140.20
17.160 |
|
| 31171 2003 | GOST 31171-2003 | Noise of machines. Guidelines for the selection of method for the determination of emission sound pressure levels at a work station and at other specified positions | 17.140.20 | |
| 31172 2003 | GOST 31172-2003 | Noise of machines. Measurement of emission sound pressure levels at a work station and at other specified positions. Engineering method in an essentially free field over a reflecting plane | 17.140.20 | |
| 31249 | GOST 31249-2004 | Acoustics. Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their acoustical performance | 17.140.20 | |
| 31252 2004 | GOST 31252-2004 | Noise of machines. Guidelines for the selection of method for the determination of sound power levels | 17.140.20 | |
| 31273 2003 | GOST 31273-2003 | Noise of machines. Determination of sound power levels using sound pressure. Precision methods for anechoic and semi-anechoic rooms | 17.140.20 | |
| 31274 2004 | GOST 31274-2004 | Noise of machines. Determination of sound power levels using sound pressure. Precision methods for reverberation rooms | 17.140.20 | |
| 31287 2005 | GOST 31287-2005 | Noise. Guidelines for noise control in workrooms by means of acoustical screens | 17.140.20 | |
| 31295-01 2005 | GOST 31295.1-2005 | Noise. Attenuation of sound during propagation outdoors. Part 1. Calculation of the absorption of sound by the atmosphere | 17.140.01 | |
| 31295-02 2005 | GOST 31295.2-2005 | Noise. Attenuation of sound during propagation outdoors. Part 2. General method of calculation | 17.140 | |
| 31297 2005 | GOST 31297-2005 | Noise. Engineering method of determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment | 17.140.20 | |
| 31298-01 2005 | GOST 31298.1-2005 | Noise of machines. Determination of sound insulation performances of enclosures. Part 1. Measurements under laboratory conditions for declaration of noise performans values | 17.140.01 | |
| 31298-02 2005 | GOST 31298.2-2005 | Noise of machines. Determination of sound insulation performances of enclosures. Part 2. Measurements in situ for acceptance and verification of declared noise performance values | 17.140.01 | |
| 31300 2005 | GOST 31300-2005 | Noise of machines. Liquid pumps. Noise tests | 17.140.20 | |
| 31301 2005 | GOST 31301-2005 | Noise. Noise control design procedures for open plants | 17.140.20 | |
| 31352 2007 | ★ | GOST 31352-2007 | Noise of machines. Determination of sound power level radiated into a duct for fans and other air-moving devices using a in-duct method | 17.140.20 |
| 31353-01 2007 | ★ | GOST 31353.1-2007 | Noise of machones. Industrial fans. Determination of sound power levels under laboratory conditions. Part 1. General overview | 17.140.20 |
| 31353-02 2007 | ★ | GOST 31353.2-2007 | Noise of machines. Industrial fans. Determination of sound power levels under laboratory conditions. Part 2. Reverberant method | 17.140.20 |
| 31353-03 2007 | ★ | GOST 31353.3-2007 | Noise of machines. Industrial fans. Determination of sound power levels under laboratory conditions. Part 3. Enveloping surface method | 17.140.20 |
| 31353-04 2007 | ★ | GOST 31353.4-2007 | Noise of machones. Industrial fans. Determination of sound power levels under laboratory conditions. Part 4. Sound intensity method | 17.140.20 |
| 50573 1993 | GOST R 50573-93 | Metal forging machines. Noise characteristics and methods of their determination | 25.120.10
17.140.20 |
|
| 50951 1996 | GOST R 50951-96 | Outside noise emitted by the main. Line and shunting diesel locomotives. Measuring rates and methods | 45.060.10
17.140.30 45.020 |
|
| 51024 1997 | GOST R 51024-97 | Electronics hearing aids. General specifications | 17.140.50 | |
| 51400 1999 | GOST R 51400-99 | Noise of machines. Determination of sound power levels using sound pressure. Engineering methods for small, movable sources in reverberant fields for hard - walls test rooms and for special reverberation test rooms | 17.140.20 | |
| 51401 1999 | GOST R 51401-99 | Noise of machines. Determination of sound power levels of noise sources using sound pressure. Engineering method in an essentially free field over a reflecting plane | 17.140.20 | |
| 51402 1999 | GOST R 51402-99 | Noise of machine. Determination of power levels of noise sources using sound pressure. Survey method using an enveloping measurement surface over a reflecting plane | 17.140.20 | |
| 51407 1999 | GOST R 51407-99 | Electromagnetic compatibility of technical equipment. Hearing aids. Requirement ant test methods | 17.140.50
33.100 |
|
| 51648 2000 | GOST R 51648-2000 | Acoustic and tactile signals for traflic lights for vision and vision-and-hearing impaired persons. Parameters | 11.180
17.140.99 93.080.30 |
|
| 51943 2002 | GOST R 51943-2002 | Acoustical barriers for transport noise reduction. Experimental methods for determination of insertion loss | 17.140.30 | |
| 52800 2007 | ★ | GOST R 52800-2007 | Noise. Coast-by methods for measurement of tyre-to-road sound emission | 17.140.30
83.160.10 |
| 52893 2007 | ★ | GOST R 52893-2007 | Noise of machines. Test code for the measurement of airborne noise emitted by private and professional power lawn mowers and lawn and garden tractors with mowing attachments | 17.140.20 |
| 52894-01 2007 | ★ | GOST R 52894.1-2007 | Noise of machines. Sound power rating of air-conditioning and air-source heat pump equipment. Part 1. Non-ducted outdoor equipment | 17.140.20 |
| 52894-02 2007 | ★ | GOST R 52894.2-2007 | Noise of machines. Sound power rating of air-conditioning and air-source heat pump equipment. Part 2. Non-ducted indoor equipment | 17.140.20 |
| 52895 2007 | ★ | GOST R 52895-2007 | Noise of machines. Acceptance test code gear units for airborne sound | 17.140.20 |
| IEC 60126 2001 | GOST R IEC 60126-2001 | Reference coupler for the measurement hearing aids. Construction requirements | 17.140.50
11.180 17.020 |
|
| IEC 60711 2001 | GOST R IEC 60711-2001 | Occluded-ear simulator. Technical requirements and test methods | 17.140.50
11.180 17.020 |
|
| ISO 00230-05 2002 | GOST ISO 230-5-2002 | Test code for machine tools. Part 5. Determination of the noise emission | 17.140.20
25.080.01 |
|
| ISO 15665 2007 | ★ | GOST R ISO 15665-2007 | Noise. Guidelines for acoustic insulation of pipes and valves | 17.140.20 |
| ISO 22868 2007 | ★ | GOST R ISO 22868-2007 | Noise of machines. Noise test engineering method for portable hand-held forestry machines with petrol engine | 13.140
17.140.20 |
| 17.160 |
振動、衝撃及び振動の測定 注: 振動及びショック(環境問題)→ 13.160 注: 釣り合い及び釣合試験機→ 21.120.40 注: 建物の振動防護→ 91.120.25 |
|||
| Sort | Mk | 規格番号 | 規格名称(英語) | 国際規格分類 ( ICSコードの説明 ) |
| 00004-304 1985 | GOST 4.304-85 | Production quality index system. Vibration measurement equipment and apparatus. Index nomenclature | 03.120
17.160 |
|
| 00012-04-012 1983 | GOST 12.4.012-83 | Occupational safety standards system. Vibration. Means for measurement and control of vibration in site. Technical requirements | 13.160
17.160 |
|
| 16819 1971 | GOST 16819-71 | Vibrometers. Terms and definitions | 01.040.17
17.160 |
|
| 16844 1986 | GOST 16844-86 | [withdrawn]
Technical requipments for mechanical hammers |
19.060
17.160 25.140 |
|
| 16844 1993 | GOST 16844-93 | Vibration. Requirements for testing mechanical hammers | 17.160
19.060 |
|
| 17770 1986 | GOST 17770-86 | Hand-holding machines. Vibration characteristics requirements | 25.140
17.160 |
|
| 20815 1993 | GOST 20815-93 | Rotating electrical machines. Mechanical vibration of centain machines with chaft heights 56 mm and higher. Measurement, evaluation and limits of the vibration severity | 29.160.01
17.160 |
|
| 20832 1975 | GOST 20832-75 | Standard system of vibration. Electric rotative machines of mass up to 0,5 kg. Vibration limit | 29.160.01
17.160 |
|
| 23718 1993 | GOST 23718-93 | Passenger and transport aeroplanes and helicopters. Admissible levels of vibration in saloons and crew cabins and methods of vibration measuring | 49.020
17.160 13.160 |
|
| 23719 1979 | GOST 23719-79 | Passenger and transport aeroplanes and helicopters. Methods of measuring vibrations parameters in saloons and crew cabins | 17.160
49.020 |
|
| 24346 1980 | GOST 24346-80 | Vibration. Terms and definitions | 01.040.17
17.160 |
|
| 24347 1980 | GOST 24347-80 | Vibration. Designations and units of quantities | 17.160
01.060 |
|
| 25051-04 1983 | GOST 25051.4-83 | Electrodynamic vibration testing equipment. General specifications | 17.160
19.060 |
|
| 25275 1982 | GOST 25275-82 | Standards system on vibration. Devices for measuring the vibration of rotary machines. General technical requirements | 17.160 | |
| 25364 1988 | GOST 25364-88 | Aggregates steam turbined stationary. Vibration normes and general requirements for realizing of measurements | 27.040
17.160 |
|
| 25364 1997 | GOST 25364-97 | Land-based steam turbine-generator sets. Evaluation of machine vibration by measurement on non-rotating parts and requirements for the measurement of vibration | 27.040
17.160 |
|
| 26043 1983 | GOST 26043-83 | Vibration. Dynamic characteristics of stationary machines. General | 17.160 | |
| 26044 1983 | GOST 26044-83 | Vibration. Equipment for operational monitoring of power hydroturbine unit vibration state. General technical requirments | 17.160
27.140 |
|
| 26493 1985 | GOST 26493-85 | Vibration. Pulp and paper production processing equipment, vibration standards. Technical requirements | 85.100
17.160 |
|
| 27164 1986 | GOST 27164-86 | Special instrumentation for operational monitoring bearing vibration in large stationary aggregates. Technical requirements | 21.100
17.160 |
|
| 27165 1997 | GOST 27165-97 | Large land-based steam turbine-generator sets. Evaluation of machine vibration by measurement on rotating shafts and general requirements for the measurement of vibration | 27.040
17.160 |
|
| 27259 1987 | GOST 27259-87 | Earth-moving machinery. Operator seat. Transmitted vibration | 53.100
13.160 17.160 |
|
| 28362 1989 | GOST 28362-89 | Vibration and shosk. Vibration isolators. Information supplied by the user and manufacturer | 17.160 | |
| 30296 1995 | GOST 30296-95 | General-purpose measuring instruments for determination of main vibration parameters. General requirements | 17.160 | |
| 30434 1996 | GOST 30434-96 | Air conditioning and ventilating equipment. Rates and methods of vibration-survival and vibration-resistance control | 17.160
23.120 |
|
| 30576 1998 | GOST 30576-98 | Mechanical vibration. Centrifugal feed pumps for thermal stations. Evaluation of machine vibration and requirements for the measurement of vibration | 27.080
17.160 |
|
| 30652 1999 | GOST 30652-99 | Vibration. Calibration of vibration and shock pick-ups. Part 3. Secondary vibration calibration by comparison methods | 17.160 | |
| 31170 2004 | GOST 31170-2004 | Vibration and noise of machines. Vibration, noise and force characteristics of marine machines and marine equipment subject to declaration and verification by testing at supplier-factory's stands | 17.140.20
17.160 |
|
| 31349 2007 | ★ | GOST 31349-2007 | Reciprocating internal combustion engine driven alternating current generating sets. Measurement and evaluation of mechanical vibrations | 17.160
27.020 29.160.40 |
| 31351 2007 | ★ | GOST 31351-2007 | Vibration. Industrial fans. Measurement of vibration | 17.160
23.120 |
| 50209 1992 | GOST R 50209-92 | Vibration. Requirements for means of testing mechanical hammers | 17.160
25.140.30 |
|
| 51376-01 1999 | GOST R 51376.1-99 | Hand-held portable power tools. Measurement of vibrations at the handle. Part 1. General | 25.140
17.160 |
|
| 51376-02 1999 | GOST R 51376.2-99 | Hand-held portable power tools. Measurement of vibrations at the handle. Part 2. Chipping hammers and riveting hammers | 25.140
17.160 |
|
| 51376-03 1999 | GOST R 51376.3-99 | Hand-held portable power tools. Measurement of vibrations at the handle. Part 3. Rock drills and rotary hammers | 25.140
17.160 |
|
| 51376-04 1999 | GOST R 51376.4-99 | Hand-held portable power tools. Measurement of vibrations at the handle. Part 4. Grinders | 25.140
17.160 |
|
| 51376-05 1999 | GOST R 51376.5-99 | Hand - held portable power tools. Measurement of vibrations at the handle. Part 5. Pavement breakers and hammers for construction work | 25.140
17.160 |
|
| 51376-06 1999 | GOST R 51376.6-99 | Hand-held portable power tools. Measurement of vibrations at the handle. Part 6. Impact drills | 25.140
17.160 |
|
| 51399 1999 | GOST R 51399-99 | Mechanical vibration. Measurement of vibration generated internally in railway tunnels by the passage of trains | 17.160 | |
| 51498 1999 | GOST R 51498-99 | Mechanical vibration. Susceptibility and sensitivity of machines to unbalance | 17.160
25.020 |
|
| 51499 1999 | GOST R 51499-99 | Environmental dynamic testing for machines, instruments and other articles. Vibration. Time-history method | 17.160 | |
| 51502 1999 | GOST R 51502-99 | Environmental dynamic testing for machines, instruments and other articles. Exposure to broad-band random vibration (digital control) | 17.160
19.060 19.040 |
|
| 52892 2007 | ★ | GOST R 52892-2007 | Vibration and shock. Vibration of buildings. Measurement of vibration and evaluation of its effects on structure | 17.160
91.120.25 |
| ISO 02954 1997 | GOST ISO 2954-97 | Mechanical vibration of rotating and reciprocating machinery. Requirements for instruments for measuring vibration severity | 17.160 | |
| ISO 05347-00 1995 | GOST ISO 5347-0-95 | Vibration. Methods for the calibration of vibration and shock pick-ups. Part 0. Basic concepts | 17.160 | |
| ISO 05347-01 1996 | GOST ISO 5347-1-96 | Vibration. Calibration of vibrations and shock pick-ups. Part 1. Primary vibration calibration by laser interferometry | 17.160 | |
| ISO 05347-02 1997 | GOST ISO 5347-2-97 | Vibration. Methods for the calibration of vibration and shock pick-ups. Part 2. Primary shock calibration by light cutting | 17.160 | |
| ISO 05348 1999 | GOST R ISO 5348-99 | Mechanical vibration and shock. Mechanical mounting of accelerometers | 17.160 | |
| ISO 07626-01 1994 | GOST ISO 7626-1-94 | Vibration and shock. Experimental determination of mechanical mobility. Basic definitions and transducers | 17.160 | |
| ISO 07626-02 1994 | GOST ISO 7626-2-94 | Vibration and shock. Experimental determination of mechanical mobility. Measurements using single-point translation excitation with an attached vibration exciter | 17.160 | |
| ISO 07626-05 1999 | GOST ISO 7626-5-99 | Vibration and shock. Experimental determination of mechanical mobility. Part 5. Measurements using impact excitation with an exciter which is not attached to the structure | 17.160 | |
| ISO 07916 1999 | ★ | GOST R ISO 7916-99 | [withdrawn]
Forestry machinery. Portable bruch-saws. Vibration. Test methods |
17.160
65.060.80 |
| ISO 07919-01 1999 | GOST R ISO 7919-1-99 | Mechanical vibration of non-reciprocating machines. Measurements on rotating shafts and evaluation criteria. General guidelines | 17.160 | |
| ISO 07919-03 1999 | GOST R ISO 7919-3-99 | Mechanical vibration of non-reciprocating machines. Measurements on rotating shafts and evaluation criteria. Coupled industrial machines | 17.160
27.040 23.140 |
|
| ISO 07919-04 1999 | GOST R ISO 7919-4-99 | Mechanical vibration of non-reciprocating machines. Measurements on rotating shafts and evaluation criteria. Gas turbine sets | 17.160
27.040 |
|
| ISO 08002 1999 | GOST ISO 8002-99 | Mechanical vibration. Land vehicles. Method for reporting measured data | 17.160
43.020 |
|
| ISO 08042 1999 | GOST R ISO 8042-99 | Mechanical vibration and shock. Seismic transducers for shock and vibration measurements. Characteristics to de specified | 17.160 | |
| ISO 08579-02 1999 | GOST R ISO 8579-2-99 | Mechanical vibration. Determination of mechanical vibration of gear units during acceptance testing | 21.200
17.160 |
|
| ISO 10112 1999 | GOST R ISO 10112-99 | Damping materials. Graphical presentation of the complex modulus | 01.080.30
17.160 |
|
| ISO 10326-01 1999 | GOST R ISO 10326-1-99 | Mechanical vibration. Laboratory method for evaluating vehicle seat vibration. Part 1. Basic requirements | 17.160
43.040.60 |
|
| ISO 10811-01 2007 | ★ | GOST R ISO/TS 10811-1-2007 | Vibration and shock. Vibration in buildings with sensitive equipment. Part 1. Measurement and evaluation | 17.160
91.120.25 |
| ISO 10816-01 1997 | GOST ISO 10816-1-97 | Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Part 1. General guidelines | 17.160 | |
| ISO 10816-03 1999 | GOST R ISO 10816-3-99 | Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Part 3. Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15000 r/min | 17.160 | |
| ISO 10816-04 1999 | GOST R ISO 10816-4-99 | Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Part 4. Gas turbine driven sets | 17.160 | |
| ISO 10817-01 1999 | GOST R ISO 10817-1-99 | Mechanical vibration. Rotating shaft vibration measuring systems. Part 1. Relative and absolute sensing of radial vibration | 17.160 | |
| ISO 10819 1999 | GOST R ISO 10819-99 | Mechanical vibration and shock. Method for the measurements and evaluation of the vibration transmissibility of gloves at the palm of the hand | 13.160
17.160 |
|
| ISO 10846-01 1999 | GOST R ISO 10846-1-99 | Acoustic and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements. Part 1. Principles and guidelines | 17.160 | |
| ISO 11811-02 2007 | ★ | GOST R ISO/TS 10811-2-2007 | Vibration and shock. Vibration in buildings with sensitive equipment. Part 2. Classification | 17.160
91.120.25 |
| ISO 13753 1999 | GOST R ISO 13753-99 | Mechanical vibration and shock. Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system | 13.160
17.160 |
|
| ISO 14837-01 2007 | ★ | GOST R ISO 14837-1-2007 | Mechanical vibration. Ground-borne noise and vibration arising from rail systems. Part 1. General guidance | 17.160
45.080 93.060 |
| ISO 18436-01 | GOST R ISO 18436-1-2005 | Condition monitoring and diagnostics of machines. Requirements for training and certification of personnel. Part 1. Requirements for certifying bodies and the certification process | 03.100.30
17.160 |
|
| ISO 18436-02 | GOST R ISO 18436-2-2005 | Condition monitoring and diagnostics of machines. Requirements for training and certification of personnel. Part 2. Vibration condition monitoring and diagnostics | 03.100.30
17.160 |
|
| 17.180 |
光学及び光学的測定 |
|||
| Sort | Mk | 規格番号 | 規格名称(英語) | 国際規格分類 ( ICSコードの説明 ) |
| 00002-787 1971 | GOST 2.787-71 | Unified system for design documentation. Graphic designations in diagrams. Elements, devices and arrangements of gas chromatograph system | 01.080.30
17.180.30 |
|
| 00004-361 1985 | GOST 4.361-85 | Product-quality index system. Mass-spectrometric analysers. Index nomenclature | 03.120
17.180.30 71.040.10 |
|
| 00004-417 1986 | GOST 4.417-86 | Product-quality index system. Geodesic instruments. Index nomenclature | 03.120
17.180.30 |
|
| 00004-447 1986 | GOST 4.447-86 | Product-quality index system. Optical instruments for linear measurements. Nomenclature of indices | 03.120
17.180.30 17.040.30 |
|
| 00004-448 1986 | GOST 4.448-86 | Product-quality index system. Optical instruments for angular measurements. Nomenclature of indices | 03.120
17.180.30 17.040.30 |
|
| 00004-449 1986 | GOST 4.449-86 | Product-quality index system. Optical instruments for control of surface roughness and quality. Nomenclature of indices | 03.120
17.180.30 17.040.30 |
|
| 00004-450 1986 | GOST 4.450-86 | Product-quality index system. Instruments for spectral analysis. Nomenclature of indices | 03.120
17.180.30 |
|
| 00004-452 1986 | GOST 4.452-86 | Product-quality index system. Phetometric instruments. Nomenclature of indices | 03.120
17.180.30 |
|
| 00008-0003 1983 | GOST 8.003-83 | State system for ensuring the uniformity of measurements. Tool-making microscopes. Methods and means of verification | 17.180.30
37.020 |
|
| 00008-0014 1972 | GOST 8.014-72 | State system for ensuring the uniformity of measurements. Methods and means for verification of photoelectric illumination photometers | 17.180.30 | |
| 00008-0023 1986 | GOST 8.023-86 | State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring light parameters | 17.180 | |
| 00008-0023 1990 | GOST 8.023-90 | State system for ensuring the uniformity of measurements. State verification schedule for means of measuring continuous and pulse luminous radiation parameters | 17.180 | |
| 00008-0023 2003 | GOST 8.023-2003 | State system for ensuring the uniformity of measurements. State verification schedule for means measuring the continuous and pulse luminous radiation parameters | 17.180 | |
| 00008-0046 1985 | GOST 8.046-85 | State system for ensuring the uniformity of measurements. Optical dividing heads. Verification methods | 17.180.30 | |
| 00008-0106 1980 | GOST 8.106-80 | State system for ensuring the uniformity of measurements. State special standard and all-union verification schdule for means measuring radiance and radiant intensity of heat sources within temperature range of 220-900 K | 17.180 | |
| 00008-0195 1989 | GOST 8.195-89 | State system for ensuring the uniformiry of measurements. State verification schedule for means measuring spectral density of radiance, spectral density of radiant intensity and spectral density of irradiance in the wavelength range of 0,25 - 25,00 mu; radiant intensity and irradiance in the wavelength range of 0,2 - 25,0 mu | 17.180.30 | |
| 00008-0197 1986 | GOST 8.197-86 | [withdrawn => GOST 8.197-2005]
State system for ensuring the uniforming of measurements. State special standard and state verification schedule for means measuring spectral density of energy radiance of optical radiation in the wavelength range of 0,04-0,25 um |
17.180.30 | |
| 00008-0205 1990 | GOST 8.205-90 | State system for ensuring the uniformity of measurements. State verification schedule for measurement means of chroma coordinates and chromaticity coordinates | 17.180.20 | |
| 00008-0215 1976 | GOST 8.215-76 | State system for ensuring the uniformity of measurements. Glass plates for interference measurements. Means and methods of verification | 17.180.30 | |
| 00008-0229 1981 | GOST 8.229-81 | State system for ensuring the uniformity of measurements. Infrared spectrophotometers. Methods and means of verification | 17.180.30 | |
| 00008-0239 1977 | GOST 8.239-77 | State system for ensuring the uniformity of measurements. Polarimetric plates. Methods and means of calibration | 17.180.30 | |
| 00008-0298 1978 | GOST 8.298-78 | State system ensuring the uniformity of measurements. Photoelectrical laboratory colorimeters. Methods and means of calibration | 17.180.30 | |
| 00008-0332 1978 | GOST 8.332-78 | State system for ensuring the uniformity of measurements. Light measurements. Values of relative spectral light efficiency of monochromatic radiation for photopic vision | 17.180.20 | |
| 00008-0336 1978 | GOST 8.336-78 | State system for ensuring the uniformity of measurements. ИЗМ type optical mechanical length measuring machines. Methods and means of calibration | 17.180.30
17.040.30 |
|
| 00008-0393 1980 | GOST 8.393-80 | State system for ensuring the uniformity of measurements. Optical quadrants. Methods and means of verification | 17.180.30 | |
| 00008-0488 1983 | GOST 8.488-83 | State system of ensuring the unity of measurements. Measurement techniques of index of refraction distribution in transparent phase objects | 17.180 | |
| 00008-0499 1984 | GOST 8.499-84 | State system for ensuring the uniformity of measurements. State verification schedule for means of measurement of illumination effective time of exposure and colour temperature in sensitometry | 17.180.30 | |
| 00008-0500 1984 | GOST 8.500-84 | State system for ensuring the uniformity of measurements. State verification schedule for means of measurement of material optical density | 17.180.30 | |
| 00008-0514 1984 | GOST 8.514-84 | State system for ensuring the uniformity of measurements. State verification schedule for means measuring irradiance in spectrosensitomentry in the wavelength range of 0.2-1.4 um | 17.180.30 | |
| 00008-0538 1985 | GOST 8.538-85 | State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring radiant flux in the wavelength range of 0,5 - 1,6 um | 17.180 | |
| 00008-0539 1985 | GOST 8.539-85 | State system for ensuring the uniformity of measurements. State verification schedule for means measuring photomaterial resolution | 17.180.30 | |
| 00008-0552 1986 | GOST 8.552-86 | State system for ensuring the uniformity of measurements. State verification schedule for means of measuring radiant flux and irradiance in the wavelength range of 0,03-0,4 um | 17.180 | |
| 00008-0557 1991 | ★ | GOST 8.557-91 | [withdrawn]
State system for ensuring the uniformity of measurements. State verification schedule for measuring means of spectral, integral and reduced regular transmissivities within the wavelength ranges of 0.2-50.0 um, diffused and mirror reflections within the wavelength ranges of 0.1-20.0 um |
17.180 |
| 00008-0557 2007 | ★ | GOST 8.557-2007 | State system for ensuring the uniformity of measurements. State verification schedule for means measuring the spectral, integral and reduced regular transmittance and optical density within the wavelength range from 0,2 to 50,0 um, diffused and regular reflections within the wavelength range from 0,2 to 20,0 um | 17.180.01 |
| 00008-0559 1993 | GOST 8.559-93 | State system for ensuring the uniformity of measurements. State verification schedule for means of measuring the optical density of materials in transmitted light | 17.180.30 | |
| 00008-0583 2003 | GOST 8.583-2003 | State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of the refractive index of solid, liquid and gaseous medium | 17.180 | |
| 00008-0593 2002 | GOST R 8.593-2002 | State system for ensuring the uniformity of measurements. Infrared analysers of grain and forage. Verification procedure | 17.020
17.180.30 |
|
| 00008-1558 1993 | GOST R 8.1558-93 | State system for ensuring the uniformity of measurements. State verification schedule for 1 to 1x 10 minus 3 degree V/m2 degree irradiance. Measuring means within the wavelength range of 1-50 mc | 17.180 | |
| 01121 1975 | GOST 1121-75 | Flat-parallel glass. Sets | 17.180.30 | |
| 01807 1975 | GOST 1807-75 | Radius of spherical surfacer of optical components. Series of numerical values | 37.020
17.180 |
|
| 02786 1982 | GOST 2786-82 | Testing glasses for radii and form control of spherical optical surfaces. Specifications | 17.180.30 | |
| 02923 1975 | GOST 2923-75 | Flat glass plates for interference measuring ПИ 60, ПИ 80, ПИ 100, ПИ 120 | 17.180.30 | |
| 03178 1975 | GOST 3178-75 | Optical bench instruments. Height of arrangement of optical axis and exit pupil | 37.020
17.180.30 |
|
| 03514 1976 | GOST 3514-76 | Colourless optical glass. Technical conditions | 17.180.30 | |
| 04266 1979 | GOST 4266-79 | Water colour scale. Specifications | 17.180.20 | |
| 05359 1977 | GOST 5359-77 | Ocular screw thread for optical devices. Profile and dimensions | 17.180.30
37.020 |
|
| 07329 1991 | GOST 7329-91 | Chemical laboratory and electrovacuum glassware. Polarizable and optical method of path-length difference measuring | 17.180
81.040.30 |
|
| 07427 1976 | GOST 7427-76 | Geometrical optics. Terms, definitions and letter symbols | 01.040.17
17.180 |
|
| 07721 1989 | GOST 7721-89 | Illuminants for colour measurements. Types. Technical requirements. Marking | 17.180.20 | |
| 08074 1982 | GOST 8074-82 | Toolmaker's microscopes. Types, main parameters and dimensions. Technical requirements | 37.020
17.180.30 |
|
| 09847 1979 | GOST 9847-79 | Optical instruments for surface roughness parameters measuring. Basis parameters and types | 17.180.30 | |
| 10528 1990 | GOST 10528-90 | Levels. General specifications | 17.180.30 | |
| 10529 1986 | GOST 10529-86 | Theodolites. General specifications | 17.180.30 | |
| 10529 1996 | GOST 10529-96 | Theodolites. General specifications | 17.180.30 | |
| 10627 1971 | GOST 10627-71 | Telescopes of pyrometers of built up radiation. Calibration tables | 17.180.30
17.200.20 |
|
| 10771 1982 | GOST 10771-82 | Filament electric lamps for light measuring. Specifications | 17.180.30 | |
| 11200 1975 | GOST 11200-75 | Objectives and body-tubes of the microscopes. Attaching dimensions | 17.180.30 | |
| 11897 1978 | GOST 11897-78 | Tripods for geodetic instruments. General specifications | 17.180.30 | |
| 11897 1994 | GOST 11897-94 | Tripods for geodetic instruments. General technical requirements and metods of tests | 17.180.30 | |
| 12995 1982 | GOST 12995-82 | Optical banch of trapezoidal profile. Main and conjugated dimensions. Technical requirements | 17.180.30 | |
| 13088 1967 | GOST 13088-67 | Colourimetry. Terms, symbols | 17.180.20
01.040.17 |
|
| 13424 1968 | GOST 13424-68 | Teodolites. Methods for determination of errors of horizontal circle diameter | 17.180.30 | |
| 14686 1969 | GOST 14686-69 | Means of measurements for luminous quantities. Terms | 01.040.17
17.180.30 |
|
| 15624 1975 | GOST 15624-75 | Mass spectrometers. Terms and definitions | 01.040.17
17.180.30 |
|
| 16548 1980 | GOST 16548-80 | Silica glass and wares of it. Terms and definitions | 01.040.17
17.180 |
|
| 17173 1981 | GOST 17173-81 | Spectral slits and attachments to them. Types, basic parameters and dimensions. Technical requirements | 17.180.30 | |
| 19223 1990 | GOST 19223-90 | Electro-optical range-finders. General specifications | 17.180.30
07.040 |
|
| 19795 1982 | GOST 19795-82 | Measuring projectors. General technical specifications | 17.180.30 | |
| 20903 1975 | GOST 20903-75 | The rectangular fused silica cells for the spectrophotometers. Basic dimensions. Technical requirements | 17.180.30 | |
| 21830 1976 | GOST 21830-76 | Geodetic instruments. Terms and definitions | 01.040.17
17.180.30 |
|
| 22409 1977 | GOST 22409-77 | Polarimetric plates. Technical requirements | 17.180.30 | |
| 23136 1978 | GOST 23136-78 | Optical materials. Parameters | 17.180.30
37.020 |
|
| 23543 1988 | GOST 23543-88 | Geodetic instruments. General specifications | 07.040
17.180.30 |
|
| 23778 1979 | GOST 23778-79 | Optical polarized measurements. Terms and definitions | 01.040.17
17.180 |
|
| 24151 1987 | GOST 24151-87 | Inclinometers. Types. Main parameters and general technical requirements | 17.180.30 | |
| 24179 1980 | GOST 24179-80 | Glass filters, filter-lenses, lenses, dispersers and diflecting insertion for railway transport light-signal. Specifications | 17.180.20 | |
| 24286 1988 | GOST 24286-88 | Pulse photometry. Terms and definitions | 01.040.17
17.180 |
|
| 26148 1984 | GOST 26148-84 | Photometry. Terms and definitions | 01.040.17
17.180 |
|
| 27176 1986 | GOST 27176-86 | Spectroscopic optical instruments. Terms and definitions | 01.040.17
17.180.30 |
|
| 27681 1988 | GOST 27681-88 | Gamma-resonance spectrometers. General technical requirements and test methods | 17.180.30 | |
| 50224 1992 | GOST R 50224-92 | Optical materials. Parameters | 17.180.30 | |
| 50314 1992 | GOST R 50314-92 | Optics. Reference wavelengths | 17.180 | |
| 50381 1992 | GOST R 50381-92 | Photogrammetric instruments. Terms and definitions | 01.040.17
17.180.30 |
|
| 50997 1996 | GOST R 50997-96 | Mine's gydrocompass. General specification | 17.180.30 | |
| 51067 1997 | GOST R 51067-97 | Mine surveing anglemeters. General specifications | 17.180.30 | |
| 51503 1999 | GOST R 51503-99 | Devices for measurement of light technical characteristics of information display instruments. Types, basic parameters, general technical requirements | 17.180.30
13.180 |
|
| 51774 2001 | GOST R 51774-2001 | Electronic tacheometers. General specification | 17.180.30 | |
| IEC 61010-002-061 1999 | GOST R IEC 61010-2-061-99 | Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-061. Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization | 19.020
13.260 17.180.30 |
|
| ISO 11554 2008 | ★ | GOST R ISO 11554-2008 | Optics and photonics. Lasers and laser-related equipment. Test methods for laser beam power, energy and temporal characteristics | 17.180 |
| 17.200 |
熱力学及び温度測定 |
|||
| Sort | Mk | 規格番号 | 規格名称(英語) | 国際規格分類 ( ICSコードの説明 ) |
| 00004-136 1985 | GOST 4.136-85 | Product-quality index system. Thermophysical apparatus. Nomenclature of indices | 03.120
17.200.10 |
|
| 00004-156 1985 | GOST 4.156-85 | System of product-quality indices. Filled-system thermometers. Solid-expansion and bimetal thermometers and themperature controllers. Nomenclature of indices | 03.120
17.200.20 |
|
| 00004-165 1985 | GOST 4.165-85 | Product-quality index system. Temperature regulators operating without outside energy source, sensor-relays. Nomenclature of mdices | 03.120
17.200.20 |
|
| 00004-320 1985 | GOST 4.320-85 | Product-quality index system. Instruments for measuring temperature and humidity, switches. Nomenclature of indices | 03.120
17.200.20 |
|
| 00008-0026 1979 | GOST 8.026-79 | State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring quantity of heat | 17.200.10 | |
| 00008-0026 1996 | GOST 8.026-96 | State system for ensuring the uniformity of measurements. State verification schedule for means measuring energy of combustion and specific energy of combustion (combustion calorimeters) | 17.200.10 | |
| 00008-0078 1979 | GOST 8.078-79 | State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule of the equipment for means of measuring temperature with in the range 1,5-4,2 k | 17.200.20 | |
| 00008-0079 1979 | GOST 8.079-79 | State system for ensuring the uniformity of measurements. State primary standard of temperature unit in the range of 13,81 to 273,15k | 17.200.20 | |
| 00008-0084 1979 | GOST 8.084-79 | State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule of the equipment for means measuring temperature with in the range 4,2-13,81 k | 17.200.20 | |
| 00008-0130 1974 | GOST 8.130-74 | State system for ensuring the uniformity of measurements. General purpose visual pyrometers with disappearing filament. Verification methods and means | 17.200.20 | |
| 00008-0140 1982 | GOST 8.140-82 | State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring heat conductivity of solid bodies in the range of 0,1 to 5 W/(m.K) at temperatures from 90 to 500 K and in the range from 5 to 20 W/(m.K) at temperatures from 300 to 1100 K | 17.200.10 | |
| 00008-0141 1975 | GOST 8.141-75 | State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means, measuring specific heat of solid bodies within temperature range of 273,15 up to 700 K | 17.200.10 | |
| 00008-0155 1975 | GOST 8.155-75 | State system for ensuring the uniformity of measurements. Standard temperature lamps 2 cathegory. Verification methods and means | 17.200.20 | |
| 00008-0157 1975 | GOST 8.157-75 | State system for ensuring the uniformity of measurements. The temperature practical scales | 17.200.20 | |
| 00008-0158 1975 | GOST 8.158-75 | State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring temperature coefficient of linear expansion in the range 4,2-90 K | 17.200.20 | |
| 00008-0159 1975 | GOST 8.159-75 | State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring specific heat-conduction of solid frames in the range of temperatures 400-1800 K | 17.200.10 | |
| 00008-0168 1975 | GOST 8.168-75 | State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring plasma temperatures of 5000-15000k in the infrared | 17.200.20 | |
| 00008-0176 1985 | GOST 8.176-85 | State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring specific heat-conduction of solid frames in the range of temperature 1800-3000 K | 17.200.10 | |
| 00008-0177 1985 | GOST 8.177-85 | State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring heat conductivity of solid frames in the range of temperature 90 to 300 K | 17.200.10 | |
| 00008-0178 1985 | GOST 8.178-85 | State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means, measuring specific heat of solids at temperature from 90 to 273,15 K | 17.200.10 | |
| 00008-0250 1977 | GOST 8.250-77 | State system for ensuring the uniformity of measurements. Thermometers glass medical maximum. Verification methods and means | 17.200.20 | |
| 00008-0279 1978 | GOST 8.279-78 | State system for ensuring the uniformity of measurements. Glass liquid working thermometers. Methods of calibration | 17.200.20 | |
| 00008-0305 1978 | GOST 8.305-78 | State system for ensuring the uniformity of measurements. Manometric thermometers. Methods and means of calibration | 17.200.20 | |
| 00008-0312 1978 | GOST 8.312-78 | State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring instruments of variable temperature of water medium in the range of pulsation amplitudes of temperatures within 0,01 - 3 K at the pulsation frequencies from 0,005 to 50 Hz, at background temperature from 270,15 to 380,15 K and at water flow velocity from 0,5 to 20 m/s | 17.200.20 | |
| 00008-0317 1978 | GOST 8.317-78 | State system for ensuring the uniformity of measurements. Standard glass mercury thermometers. Methods and means of calibration | 17.200.20 | |
| 00008-0338 1978 | GOST 8.338-78 | [withdrawn]
State system for ensuring the uniformity of measurements. Thermal converters of industrial thermocouple thecmometers. Methods and means of verification |
17.200.20 | |
| 00008-0410 1981 | GOST 8.410-81 | State system for ensuring the uniformity of measurements. State verification schedule for means measuring plasma temperature of 10000-15000 K in the visible and ultraviolet | 17.200.20 | |
| 00008-0427 1981 | GOST 8.427-81 | [withdrawn? => GOST 8.568-99]
State system for ensuring the uniformity of measurements. Standard platinum resistance thermometers. Methods and means of calibration |
17.200.20 | |
| 00008-0448 1985 | GOST 8.448-85 | State system for ensuring the uniformity of measurements. The calorimetric measuring primary transducers. Method of verification | 17.200.10 | |
| 00008-0454 1982 | GOST 8.454-82 | State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means of measuring quantity of heat of solution and heat of reactions | 17.200.10 | |
| 00008-0461 1982 | GOST 8.461-82 | State system for ensuring the uniformity of measurements. Resistive temperature transducers. Methods and means of calibration | 17.200.20 | |
| 00008-0511 1984 | GOST 8.511-84 | State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring specific heat conduction of solid frames in the range of temperatures from 4,2 to 90 K | 17.200.10 | |
| 00008-0558 1993 | GOST 8.558-93 | State system for ensuring the uniformity of measurements. State verification schedule for means measuring temperature | 17.200.20 | |
| 00008-0566 1996 | GOST R 8.566-96 | The state system for ensuring the uniformity of measurements. Standard radiation sources (reference sources) in form of black body mоdels for temperature range -50 +2500 degree C. Standard procedure for metrological certification and verification | 17.200.10 | |
| 00008-0577 2000 | GOST R 8.577-2000 | State system for assuring the uniformity of measurements. Volumetric heat (energy) of combustion of natural gas. General requirements to methods for determination | 75.060
17.200.10 |
|
| 00008-0591 2002 | GOST R 8.591-2002 | State system for ensuring the uniformity of measurements. Two channel heat meters for water heat supply systems. Standardization of admitted error limits in measurements of the used thermal energy by users | 17.020
17.200.10 |
|
| 00008-0592 2002 | GOST R 8.592-2002 | State system for ensuring the uniformity of measurements. Thermal energy, received by users in water heat supply system. Typical procedure of measurements | 17.200.10
27.010 17.020 |
|
| 00008-0619 2006 | GOST R 8.619-2006 | State system for ensuring the uniformity of measurements. Thermographic instruments. Verification procedure | 17.200.20 | |
| 00112 1978 | GOST 112-78 | Meteorological glass thermometers. Specifications | 17.200.20 | |
| 00400 1980 | GOST 400-80 | Glass thermometers for testing of petroleum products. Specifications | 17.200.20 | |
| 01224 1971 | GOST 1224-71 | Thermometer glass. Marks | 17.200.20 | |
| 06616 1994 | GOST 6616-94 | Thermoelectric converters. General specifications | 17.200.20 | |
| 06651 1994 | GOST 6651-94 | Thermal converters of resistance. General technical requirements and test methods | 17.200.20 | |
| 08335 1981 | GOST 8335-81 | [withdrawn =>GOST 8335-96]
Visual disappearing filament micro-pyrometers. General specifications |
17.200.10 | |
| 08335 1996 | GOST 8335-96 | Visual disappearing filament pyrometers. General specifications | 17.200.20 | |
| 09249 1959 | GOST 9249-59 | Normal temperature | 17.200 | |
| 09871 1975 | GOST 9871-75 | Glass mercury electric-contact thermometers and thermoregulators. Specifications | 17.200.20 | |
| 10627 1971 | GOST 10627-71 | Telescopes of pyrometers of built up radiation. Calibration tables | 17.180.30
17.200.20 |
|
| 12877 1976 | GOST 12877-76 | [withdrawn? => GOST 8.568-99]
Standard platinum resistance thermometers for low temperature. General technical requirements |
17.200.20 | |
| 13646 1968 | GOST 13646-68 | Glass thermometers, mercury for precision measuring. Specifications | 17.200.20 | |
| 13800 1980 | GOST 13800-80 | Resistance temperature transducers for means of transport. General specifications | 17.200.20 | |
| 13881 1968 | GOST 13881-68 | Thermoelectric pyrometers. Methods and means of verification | 17.200.20 | |
| 14002 1974 | GOST 14002-74 | Pickup-temperature and differential temperature gauging switches ssi | 17.200.20 | |
| 14008 1982 | GOST 14008-82 | Temperature lamps as standard ones. Types and main parameters. General requirements | 17.200.20 | |
| 14894 1969 | GOST 14894-69 | Thermoelectric standard 2-class and general industry use thermometers for low temperatures. Methods and means of verification | 17.200.20
17.020 |
|
| 15981 1970 | GOST 15981-70 | Apparatus for determining dropping temperature of phenolformaldehyde resins. Specifications | 17.200.20 | |
| 16920 1993 | GOST 16920-93 | Manometric thermometers and temperature transducers. General technical requirements and methods of test | 17.200.20 | |
| 19855 1974 | GOST 19855-74 | Contact glass mercury thermometers. Specifications | 17.200.20 | |
| 21726 1983 | GOST 21726-83 | Electrical temperature regulator for system of air conditioning and refrigerating engineering. General specifications | 17.200.20 | |
| 22464 1977 | GOST 22464-77 | Thermoregulators for diesels and gas engines. General specifications | 17.200.20 | |
| 23125 1978 | GOST 23125-78 | Temperature signalling device. General technical specifications | 17.200.20 | |
| 23125 1995 | GOST 23125-95 | Temperature signalling divices. General specifications | 17.200 | |
| 23847 1979 | GOST 23847-79 | Metal sheath thermoelectric temperature transducers of КТХАС, КТХАСп, КТХКС types. Specifications | 17.200.20 | |
| 25741 1983 | GOST 25741-83 | Dials and scales of manometric thermometers. Technical requirements and marking | 17.200.20 | |
| 26331 1984 | GOST 26331-84 | Joints fastening ssi primary transducers to process pipe-linesand apparatus. Types, basic parametres and dimensions. Technical requirements | 17.200.20 | |
| 26331 1994 | GOST 26331-94 | Joints fastening primary temperature transducers to process pipe-lines and apparatus. Types and basic dimensions. Technical requirement | 17.200.20 | |
| 28243 1989 | GOST 28243-89 | Pyrometers. General technical requirements | 17.200.20 | |
| 28243 1996 | GOST 28243-96 | Pyrometers. General technical requirements | 17.200.20 | |
| 28498 1990 | GOST 28498-90 | Liquid-glass thermometers. General technical requirements. Methods of test | 17.200.20 | |
| 28537 1990 | GOST 28537-90 | Thermowells with female thread. Dimensions | 17.200.20 | |
| 28923 1991 | GOST 28923-91 | Temperatures regulators operating without outside energy source. General technical requirements and methods of test | 25.040.40
17.200.20 |
|
| 29224 1991 | GOST 29224-91 | Liquid-in-glass laboratory thermometers. Principles of design, construction and use | 17.200.20 | |
| 30232 1994 | GOST 30232-94 | Thermal transducers with unified output signal. General technical requirements | 17.200.20 | |
| 30679 1999 | GOST 30679-99 | Standard platinum resistance thermometers of the first and second grades. General technical requirements | 17.200.20 | |
| 50117 1992 | GOST R 50117-92 | Short solid-stem termometers for precision use | 17.200.20 | |
| 50118 1992 | GOST R 50118-92 | Long enclosed scale termometers for precision use | 17.200.20 | |
| 50341 1992 | GOST R 50341-92 | Manometric thermometers and temperature transducers. General technical requirements and methods of test | 17.200.20 | |
| 50342 1992 | GOST R 50342-92 | Thermoelectric converters. General specifications | 17.200.20 | |
| 50353 1992 | GOST R 50353-92 | Resistive temperature transducers. General specifications | 17.200.20 | |
| 50356 1992 | GOST R 50356-92 | Measuring transducers for thermoelectric transducers and resistance thermotransducers. General technical requirements and methods of tests | 17.200.20 | |
| 50431 1992 | GOST R 50431-92 | Termocouplers. Part 1. Nominal static graduation tables | 17.200.20 | |
| 51233 1998 | GOST R 51233-98 | State system for the uniformity of measurements. Standard platinum resistance thermometers of the first and second grades. General requirements | 17.200.20 | |
| 51649 2000 | GOST R 51649-2000 | Heat meters for water heat supply systems. General specifications | 17.200.10
91.140.10 |
|
| 52319 2005 | GOST R 52319-2005 | Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 1. General requirements | 11.080
17.060 17.080 17.100 17.120 17.120.01 17.200.20 17.220 17.220.20 |
|
| EN 01434-01 2006 | GOST R EN 1434-1-2006 | Heat meters. Part 1. General requirements | 17.200.10 | |
| EN 01434-02 2006 | GOST R EN 1434-2-2006 | Heat meters. Part 2. Constructional requirements | 17.200.10 | |
| EN 01434-03 2006 | GOST R EN 1434-3-2006 | Heat meters. Part 3. Data exchange and interfaces | 17.200.10 | |
| EN 01434-04 2006 | GOST R EN 1434-4-2006 | Heat meters. Part 4. Pattern approval tests | 17.200.10 | |
| EN 01434-05 2006 | GOST R EN 1434-5-2006 | Heat meters. Part 5. Initial verification tests | 17.200.10 | |
| EN 01434-06 2006 | GOST R EN 1434-6-2006 | Heat meters. Part 6. Installation, commissioning, operational monitoring and maintenance | 17.200.10 | |
| ISO 00651 1994 | GOST R ISO 651-94 | Solid-stem calorimeter thermometers | 17.200.20 | |
| ISO 00652 1994 | GOST R ISO 652-94 | Enclosed-scale calorimeter thermometers | 17.200.20 | |
| 17.220 |
電気学．磁気学．電気的及び磁気的測定 |
|||
| Sort | Mk | 規格番号 | 規格名称(英語) | 国際規格分類 ( ICSコードの説明 ) |
| 00002-729 1968 | GOST 2.729-68 | Unified system for design documentation. Graphic identifications in schemes. Electromeasuring apparatus | 01.080.40
17.220.20 |
|
| 00004-164 1985 | GOST 4.164-85 | Product-quality index system. Radio spectrometrical analysers. Nomenclature of indices | 03.120
17.220.20 |
|
| 00004-174 1985 | GOST 4.174-85 | System of product-quality indices. Thermoelectric temperature transducers. Pyrometers. Nomenclature of indices | 03.120
17.220.20 |
|
| 00004-189 1985 | GOST 4.189-85 | System of product-quality indices. Electrical measuring resording instruments. Nomenclature of indices | 03.120
17.220.20 |
|
| 00004-194 1985 | GOST 4.194-85 | System of product-quality indices. Analogue pertable laboratory electrical measuring instruments. Nomenclature of indices | 03.120
17.220.20 |
|
| 00004-195 1985 | GOST 4.195-85 | System of product-quality indices. Electrical standards. Nomenclature of indices | 03.120
17.220.20 |
|
| 00004-196 1985 | GOST 4.196-85 | System of product-quality indices. Analogue panel electrical measuring instruments. Nomenclature of indices | 03.120
17.220.20 |
|
| 00004-197 1985 | GOST 4.197-85 | System of product-quality indices. Sets for measurement of electrical and magnetic quantities. Nomenclature of indices | 03.120
17.220.20 |
|
| 00004-199 1985 | GOST 4.199-85 | System of product-quality indices. Infermation electrical measuring systems. Nomenclature of indices | 03.120
17.220.20 |
|
| 00004-375 1985 | GOST 4.375-85 | Product-quality index system. Measuring analogue transducers, amplifiers, stabilizers and transformers. Index nomenclature | 03.120
17.220.20 |
|
| 00004-376 1985 | GOST 4.376-85 | Product-quality index system. Combination analogue electrical measuring instruments. Index nomenclature | 03.120
17.220.20 |
|
| 00004-385 1985 | GOST 4.385-85 | Product-quality index system. Meters for mognetic induction and meters for magnetic flux. Index nomenclature | 03.120
17.220.20 |
|
| 00004-388 1985 | GOST 4.388-85 | Product-quality index system. Electrical measuring instruments for comparison. Index nomenclature | 03.120
17.220.20 |
|
| 00004-392 1985 | GOST 4.392-85 | Product-quality index system. Electricity meters. Index nomenclature | 03.120
17.220.20 91.140.50 |
|
| 00008-0006 1971 | GOST 8.006-71 | State system for ensuring the uniformity of measurements. Phase-sensitive voltmeters. Methods and means for verification | 17.220.20 | |
| 00008-0012 1972 | GOST 8.012-72 | State system for ensuring the uniformity of measurements. Methods and means for verification of pyrometric millivoltmeters | 17.220.20 | |
| 00008-0015 1972 | GOST 8.015-72 | State system for ensuring the uniformity of measurements. Method of measurements of relative dielectric permittivity and tangent of dielectric dissipation angle of solid dielectrics made of thin leafed materials in the frequency band from 9 to 10 GHz | 17.220.20 | |
| 00008-0022 1991 | GOST 8.022-91 | State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for measuring instruments of direct current strength over range from 1x10 in minus 16 degree up to 30A | 17.220.20 | |
| 00008-0027 1989 | GOST 8.027-89 | State system for ensuring the uniformity of measuremente. State primary standard and state verification schedule for measuring instruments of electromotive force and direct current | 17.220.20 | |
| 00008-0027 2001 | GOST 8.027-2001 | State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of direct electrical vortage and electromotive force | 17.020
17.220.20 |
|
| 00008-0028 1986 | GOST 8.028-86 | State system for ensuring the uniformity of measu rements. State primary standard and state verification schedule for means measuring electrical resistance | 17.220.20 | |
| 00008-0029 1980 | GOST 8.029-80 | State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means measuring inductance | 17.220.20 | |
| 00008-0030 1991 | GOST 8.030-91 | State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for measuring means of magnetic inductance of static field in the range from 1x10 in minus 12 degree up to 5x10 in minus 2 degree T, constant magnetic flux, magnetic inductance and magnetic moment in frequency band from 0 - 20000 Hz | 17.220.20 | |
| 00008-0097 1973 | GOST 8.097-73 | State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring magnetic field intensity within frequency range 0,01 - 300 MHz | 17.220.20 | |
| 00008-0098 1973 | GOST 8.098-73 | State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring electric intensity within frequency range 0,15-30 mnz | 17.220.20 | |
| 00008-0102 1973 | GOST 8.102-73 | State system for ensuring the uniformity of measurements. The state standard and all-union verification schedule for instruments measuring power of electromagnetic oscillations in waveguides within frequency range from 37,5 up to 53,57 GHz | 17.220.20 | |
| 00008-0109 1983 | GOST 8.109-83 | State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means of modulation index of hign frequency oscillations | 17.220.20 | |
| 00008-0110 1974 | GOST 8.110-74 | State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring non-linear distortion ratio within frequency range from 20 up to 1000000 Hz | 17.220.20 | |
| 00008-0117 1982 | GOST 8.117-82 | State system of ensuring the uniformity of measurements. Diode slideback voltmeters. Methods and means of verification | 17.220.20 | |
| 00008-0118 1985 | GOST 8.118-85 | State system for ensuring the uniformity of measurements. Analogue electronic a.c. Voltmeters. Methods of verification | 17.220.20 | |
| 00008-0119 1985 | GOST 8.119-85 | State system for ensuring the uniformity of measurements. Selective electron voltmeters. Methods of verification | 17.220.20 | |
| 00008-0132 1974 | GOST 8.132-74 | State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring current intensities from 0,04 up to 300 A within the frequency range of 0,1 up tp 300MHz | 17.220.20 | |
| 00008-0144 1975 | GOST 8.144-75 | State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means, measuring magnetic induction within the range of 0,05 to 2T | 17.220.20 | |
| 00008-0144 1997 | GOST 8.144-97 | State system for ensuring the uniformity of measurements. State verification schedule for measuring means of magnetic induction of state magnetic fields within the range from 0,05 TO 2 T | 17.220.20 | |
| 00008-0188 1985 | GOST 8.188-85 | State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means of measuring magnetic induction of constant field in the range of 2-10 T for temperature range from 4,2 to 300 K and from 0,1 up to 2 T for the range from 4,2 to 77 K | 17.220.20 | |
| 00008-0189 1976 | GOST 8.189-76 | State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring electric intensity within frequency range 30 - 1000 mhz | 17.220.20 | |
| 00008-0192 1976 | GOST 8.192-76 | State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring phase shift angle and field intensities ratio distribution in apertures of antenna system with operating dimension from 0,5x0,5 to 3x3 m2 at the frequency range from 8,2 to 12 GHz | 17.220.20 | |
| 00008-0194 1976 | GOST 8.194-76 | State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuriring phase shift angle within frequency range from 8,2 to 12 GHz | 17.220.20 | |
| 00008-0202 1976 | GOST 8.202-76 | State system for ensuring the uniformity of measurements. The state primary standard and the all-union verification schedule for means measuring the flux of electrons and that of energy of the beam of accelerated electrons energy from 0,8 to 8,0 pJ (5 to 50 MeV) | 17.220 | |
| 00008-0209 1976 | GOST 8.209-76 | State system of ensuring the uniformity of measurements. Magnetoelectrical logometers. Methods and means of verification | 17.220.20 | |
| 00008-0212 1984 | GOST 8.212-84 | State system for ensuring the uniformity of measurements. Measures of electromotive force. Standard cells. Calibration methods and facilities | 17.220.20 | |
| 00008-0214 1976 | GOST 8.214-76 | State system for ensuring the uniformity of measurements. Hard-magnetic coating. Methods of measuring magnetic parameters | 17.220.20
35.220.20 |
|
| 00008-0216 1988 | GOST 8.216-88 | State system for ensuring the uniformity of measurements. Voltage transformers. Verification methods | 17.220.20 | |
| 00008-0217 1987 | GOST 8.217-87 | State system for ensuring the uniformity of measurements. Current transformers. Calibration methods | 17.220.20 | |
| 00008-0231 1984 | GOST 8.231-84 | State system for ensuring the uniformity of measurements. State primay standard and all-union verification schedule for means measuring magnetic moment, magnetic susceptibility and magnetization | 17.220.20 | |
| 00008-0232 1977 | GOST 8.232-77 | State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for measuring means of frequency deviation | 17.220.20 | |
| 00008-0232 1997 | GOST 8.232-97 | State system for ensuring the uniformity of measurements. State verification schedule for means measuring the frequency deviation | 17.220.20 | |
| 00008-0237 1977 | GOST 8.237-77 | [withdrawn]
State system for ensuring the uniformity of measurements. Measuring resistance coil. Methods and means of verification |
17.220.20 | |
| 00008-0249 1977 | GOST 8.249-77 | State system of ensuring the uniformity of measurements. Measuring coaxial and waveguide attenuators. Methods and means for verification at 0,1 to 17444megs frequency range | 17.220.20 | |
| 00008-0255 1977 | GOST 8.255-77 | State system for ensuring the uniformity of measurements. Capasitance measures. Methods and means of calibration | 17.220.20 | |
| 00008-0259 1977 | GOST 8.259-77 | State system for ensuring the uniformity of measurements. Electric induction watt-hour meters of active methods and means of verification | 17.220.20 | |
| 00008-0261 1977 | GOST 8.261-77 | State system for ensuring the uniformity of measurements. Galvanometers. Methods and means of verification | 17.220.20 | |
| 00008-0268 1977 | GOST 8.268-77 | State system for ensuring the uniformity of measurements. The method of carring out measurements for determination of static magnetic characteristics of hard magnetic materials | 17.220.20 | |
| 00008-0277 1978 | GOST 8.277-78 | State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means of measurement of power of electromagnetic oscillations in waveguides within frequency range from 53,57 up to 78,33 GHz | 17.220.20 | |
| 00008-0278 1978 | GOST 8.278-78 | State system for ensuring the uniformity of measurements. D.C. Measuring voltaqe dividers. Methods and means of verification | 17.220.20 | |
| 00008-0280 1978 | GOST 8.280-78 | State system for ensuring the uniformity of measurements. Automatic potentiometers and balanced bridges. Methods and means of verification | 17.220.20 | |
| 00008-0284 1978 | GOST 8.284-78 | State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means of measuring of relative dielectric constant of liquids, solid and gases at frequencies 1 - 10 GHz | 17.220.20 | |
| 00008-0292 1984 | GOST 8.292-84 | State system for ensuring the uniformity of measurements. The laboratory conductometers of liquid. Methods of verification | 17.220.20 | |
| 00008-0294 1985 | GOST 8.294-85 | State system of ensuring the uniformity of measurements. A.c. balanced bridges. Calibration methods | 17.220.20 | |
| 00008-0303 1978 | GOST 8.303-78 | State system for ensuring the uniformity of measurements. Teslameters for constant magnetic fields in the range from 0,01 to 2T. Methods and means of verification | 17.220.20 | |
| 00008-0311 1978 | GOST 8.311-78 | State system for ensuring the uniformity of measurements. Cathode-ray oscillographs. Methods and means for verification | 17.220.20 | |
| 00008-0331 1999 | GOST 8.331-99 | State system for ensuring the uniformity of measurement. Distortion meters. Methods and means of verification and calibration | 17.220
33.140 17.020 |
|
| 00008-0333 1978 | GOST 8.333-78 | State system for ensuring the uniformity of measurements. Alternating currend compensators. Methods and means of verification | 17.220.20 | |
| 00008-0343 1979 | GOST 8.343-79 | State system for ensuring the uniformity of measurements. Air-electrical transducers. Methods and means of verification | 17.220.20 | |
| 00008-0344 1980 | GOST 8.377-80 | State system for ensuring the uniformity of measurements. Soft-magnetic materials. Methods of determination of static magnetic characteristics | 17.220.20
29.030 |
|
| 00008-0350 1979 | GOST 8.350-79 | State system for ensuring the uniformity of measurements. High-frequency ammeters. Methods and means of verification | 17.220.20 | |
| 00008-0358 1979 | GOST 8.358-79 | State system for ensuring the uniformity of measurements. Method of making measurements of relative permittivity and dielectric loss tangent in the fregnency range of 0,2 to 1 GHz | 17.220 | |
| 00008-0363 1979 | GOST 8.363-79 | State system for ensuring the uniformity of measurements. Measuring coil antennas. Verification methods and means | 17.220.20
33.120.40 |
|
| 00008-0366 1979 | GOST 8.366-79 | State system for ensuring the uniformity of measurements. Digital ohmmeters. Methods and means for verification | 17.220.20 | |
| 00008-0371 1980 | GOST 8.371-80 | State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring electrical capacity | 17.220.20 | |
| 00008-0391 1980 | GOST 8.391-80 | State system for ensuring the uniformity of measurements. D.C. electrical energy meters. Methods and means of calibration | 17.220.20 | |
| 00008-0392 1980 | GOST 8.392-80 | State system for ensuring the uniformity of measurements. Low power SHF wattmeters and their primary measuring transformers of frequency range 0,03-78.33 GHz. Verification means and methods | 17.220.20 | |
| 00008-0397 1980 | GOST 8.397-80 | State system for ensuring the uniformity of measurements. Waveguide puise low-power meters at frequency range 5,64-37,5 GHz. Methods and menas of verifications | 17.220.20 | |
| 00008-0402 1980 | GOST 8.402-80 | State system for ensuring the uniformity of measurements. Direct current electronic analogue voltmeters. Methods and means of calibration | 17.220.20 | |
| 00008-0403 1980 | GOST 8.403-80 | State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring of relative dielectric constant of solid and liquids at frequencies from 1x10 up to 1x10 in 7 degree Hz | 17.220.20 | |
| 00008-0405 1980 | GOST 8.405-80 | State system of ensuring unity of measurements. Special state standard and state verification scheme for initial permeability measuring means in 1 to 200 MHz frequency range | 17.220.20 | |
| 00008-0409 1981 | GOST 8.409-81 | State system for ensuring the uniformity of measurements. Ohmmeters. Methods and means of calibration | 17.220.20 | |
| 00008-0412 1981 | GOST 8.412-81 | State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring relative dielectric constant at frequency 1-200 MHz | 17.220.20 | |
| 00008-0415 1981 | GOST 8.415-81 | State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring intensities ratio distributions and phase shift angle in aperture field of antenna systems with operating dimensions from 3x3 to 6x12 m2 at the frequency range from 2,5 to 4,0 and from 8,2 to 12,0 GHz | 17.220.20 | |
| 00008-0416 1981 | GOST 8.416-81 | State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring phase shift angle within frequency range from 2. 5 to 3. 5 GHz | 17.220.20 | |
| 00008-0422 1981 | GOST 8.422-81 | State system for ensuring the uniformity of measurements. Frequency meters. Methods and means for verification | 17.220.20 | |
| 00008-0429 1981 | GOST 8.429-81 | State system for ensuring the uniformity of measurements. Electronic analogue pulse voltmeters. Methods and means for verification | 17.220.20 | |
| 00008-0436 1981 | GOST 8.436-81 | State system for ensuring the uniformity of measurements. Measuring sets power supply bridges. Methods and means for checking | 17.220.20
17.020 |
|
| 00008-0449 1981 | GOST 8.449-81 | State system for ensuring the uniformity of measurements. D. c. bridges. Methods and means of calibration | 17.220.20 | |
| 00008-0457 1982 | GOST 8.457-82 | State system for ensuring the uniformity of measurements. State primary standards and state verification schedule for means of measuring specific conductivity of solutions of electrolytes within the range of 1х10 in minus 4 degree to 1х10 in 2 degree Sm/m | 17.220.20 | |
| 00008-0457 2000 | GOST 8.457-2000 | State system for ensuring the uniformity of measurements. State verification schedule for means of measuring specific conductivity of liguids | 17.020
17.220.20 |
|
| 00008-0458 1982 | GOST 8.458-82 | State system for ensuring the uniformity of measurements. The thermoelectrical transducers and comparators. Methods and means of calibration | 17.220.20 | |
| 00008-0462 1982 | GOST 8.462-82 | State system of ensuring the uniformity of measurements. Superhigh frequency phasemeters and phaseshifters. Methods and means of verification | 17.220.20 | |
| 00008-0463 1982 | GOST 8.463-82 | State system of ensuring the uniformity of measurements. Measuring antennas. Measuring complex of apparatus. Methods and means of verification | 17.220.20
33.120.40 |
|
| 00008-0478 1982 | GOST 8.478-82 | State system for ensuring the uniformity of measurements. D. c. measuring potentiometers. Methods and means of verification | 17.220.20 | |
| 00008-0491 1983 | GOST 8.491-83 | State system for ensuring the uniformity of measurements. Electrocontact converters for checking linear dimensions. Methods and means of verification | 17.220.20
17.040.30 |
|
| 00008-0493 1983 | GOST 8.493-83 | State system for ensuring the uniformity of measurements. Coaxial impedance meters. Methods and means of verification | 17.220.20 | |
| 00008-0497 1983 | GOST 8.497-83 | State system for ensuring the uniformity of measurements. Ammeters, voltmeters, wattmeters, varmeters. Calibration methods | 17.220.20 | |
| 00008-0498 1983 | GOST 8.498-83 | State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means of measuring electrical quality factor | 17.220.20 | |
| 00008-0498 1998 | GOST 8.498-98 | State system for ensuring the uniformity of measurement. State verification scheme for means of measuring electrical quality factor | 17.220.20 | |
| 00008-0533 1985 | GOST 8.533-85 | State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring phase shift angle with in the frequency range from 25,95 to 37,50 GHz | 17.220 | |
| 00008-0535 1985 | GOST 8.535-85 | State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means of measuring power of electromagnetic oscillations in waveguide within frequency range from 78,3 to 178,6 | 17.220.20 | |
| 00008-0540 1985 | GOST 8.540-85 | State system for ensuring the uniformity of measurements. State special standard and state verification shedule hor means measuring pulsed electric and magnetic fields | 17.220.20 | |
| 00008-0540 1993 | GOST 8.540-93 | State system for insuring the uniformity of measurements. State verification schedule for means measuring maximum values of impulse electric and magnetic fields | 17.220.20 | |
| 00008-0544 1986 | GOST 8.544-86 | State system for ensuring the uniformity of measurements. Relative dielectric permittivity the loss tangent of solid dielectrics. Procedure of measure from 10 in 9 degree to 10 in 10 degree Hz | 17.220.20
29.035 |
|
| 00008-0550 1986 | GOST 8.550-86 | State system for ensuring the uniformity of measurements. State special standard and state verification schedul for means of measuring sinusoidal current ratio | 17.220.20 | |
| 00008-0551 1986 | GOST 8.551-86 | State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring electric power and power factor over the frequency range 40-20000 Hz | 17.220.20 | |
| 00008-0560 1994 | GOST 8.560-94 | State system for ensuring the uniformity of measurements. State verification shedule for measure of electric field intensity measuring within freguency range 0.0003-1000 MGz | 17.220.20 | |
| 00008-0562 1996 | GOST R 8.562-96 | State system for ensuring the uniformity of measurements. State verification schedule for means measuring power of electromagnetic waves within frequency range from 0,03 to 37,50 GHz | 17.220.20 | |
| 00008-0564 1996 | GOST R 8.564-96 | State system for ensuring the uniformity of measurements. State verification shedule for means of electric field intensity measurement within frequency range 0-20 kHz | 17.220.20 | |
| 00008-0564 1998 | GOST 8.564-98 | State system for ensuring the uniformity of measurement. State verification scheme for means of measuring electrical capacity in frequency range from 1 to 100 MHz | 17.220.20 | |
| 00008-0569 2000 | GOST 8.569-2000 | State system for ensuring the uniformity of measurements. Low power SHF vattmeters of frequency range 0,02-178,6 GHz. Verification and calibration methods | 17.220.20 | |
| 00008-0574 2000 | GOST R 8.574-2000 | State system for ensuring the uniformity of measurements. State verification schedule for means of electromagnetic field density measurement within frequency range 0,3...178,4 GHz | 17.220.20 | |
| 00012-02-091 1983 | GOST 12.2.091-83 | Occupational safety standards system. Indicating and recording electrical measuring instruments. Safety requirements | 13.100
17.220.20 |
|
| 00012-03-019 1980 | GOST 12.3.019-80 | Occupational safety standards system. Electrical tests and measurements. General safety requirements | 13.100
19.080 17.220 |
|
| 00026-010 1980 | GOST 26.010-80 | Unified system of standards for instrument-making. Measuring and automation devices. Input and output frequency electric continuous signals | 17.220 | |
| 00026-011 1980 | GOST 26.011-80 | Measuring and automation devices. Input and output current and voltage continuous signals | 17.220 | |
| 00026-014 1981 | GOST 26.014-81 | Measurement and automation means. Input and output electric coding signals | 17.220 | |
| 01609 1976 | GOST 1609-76 | Calibrated wires for electromeasuring instruments. Specifications | 17.220.20
29.060.10 |
|
| 01954 1982 | GOST 1954-82 | Electromotive operating measures. Standard cells. General specifications | 17.220.20 | |
| 01983 1989 | GOST 1983-89 | [withdrawn]
Voltage transformers. General specifications |
17.220.20
29.180 |
|
| 01983 2001 | GOST 1983-2001 | Voltage transformers. General specifications | 17.220.20 | |
| 05365 1983 | GOST 5365-83 | Electrical measuring instruments. Dials and scales. General technical requirements | 17.220.20 | |
| 05944 1991 | GOST 5944-91 | Dimensions of panel mounted indicating and recording electrical measuring instruments | 17.220.20 | |
| 06570 1975 | GOST 6570-75 | Electrical induction active and reactive energy meters. General technical specifications | 17.220.20
91.140.50 |
|
| 06570 1996 | GOST 6570-96 | Electrical induction active and reactive energy meters. General specifications | 17.220 | |
| 06746 1975 | GOST 6746-75 | Capacitance measures. General specifications | 17.220 | |
| 06746 1994 | GOST 6746-94 | Measures of electrical capacitance. General technical requirements | 17.220.20 | |
| 07164 | GOST 7164-78 | SSI self-balancing servoinstruments. General specifications | 17.220.20 | |
| 07165 1978 | GOST 7165-78 | Direct current measuring bridges. General technical specifications | 17.220.20 | |
| 07165 1993 | GOST 7165-93 | D.C. bridges for measuring resistance | 17.220.20 | |
| 07590 1978 | GOST 7590-78 | Indicating analog electromeasuring instruments for measuring frequency. General technical specifications | 17.220.20 | |
| 07590 1993 | GOST 7590-93 | Direct acting indicating analogue electrical measuring instruments and their accessories. Part 4. Special requirements for freguency meters | 17.220.20 | |
| 07746 2001 | GOST 7746-2001 | Current transformers. General specifications | 17.220.20 | |
| 08039 1979 | GOST 8039-79 | Phase-angle and power-factor meters. | 17.220.20 | |
| 08039 1993 | GOST 8039-93 | Direct acting indicating analogue electrical measuring instruments and their accessories. Part 5. Special requirements for phase meters, power factor meters and synchroscopes | 17.220.20 | |
| 08042 1978 | GOST 8042-78 | Measuring converters. Instrument shunts. Specifications | 17.220.20 | |
| 08042 1993 | GOST 8042-93 | Direct acting indicating analogue electrical measuring instruments and their accessories. Part 8. Special requirements for accessories | 17.220.20 | |
| 08476 1978 | GOST 8476-78 | Wattmeters and varmeters. General technical specifications | 17.220.20 | |
| 08476 1993 | GOST 8476-93 | Direct acting indicating analogue electrical measuring instruments and their accessories. Part 3. Special requirements for wattmeters and varmeters | 17.220.20 | |
| 08623 1978 | GOST 8623-78 | Supplementary resistances for electrical measuring instruments. Specifications | 17.220.20 | |
| 08711 1978 | GOST 8711-78 | Ammeters and voltmeters. General technical specifications | 17.220.20 | |
| 08711 1993 | GOST 8711-93 | Direct acting indicating analogue electrical measuring inctruments and their accessories. Part 2. Special requirements for ammeters and voltmeters | 17.220.20 | |
| 08913 1976 | GOST 8913-76 | Electrical measuring instruments. Pivots. Technical requirements | 17.220.20 | |
| 09181 1974 | GOST 9181-74 | Electrical measuring instruments. Packing, marking, transport and storage | 17.220.20 | |
| 09245 | GOST 9245-79 | Measuring d.c. potentiometers. General specifications | 17.220.20 | |
| 09486 1979 | GOST 9486-79 | Alternating current measuring bridges. General requirements | 17.220.20 | |
| 09736 1991 | GOST 9736-91 | Electric apparatus of direct transformation for measuring non-electrical values. General technical requirments and metods of tests | 17.220 | |
| 09829 1981 | GOST 9829-81 | Light-beam oscillographs. General technical requirements | 17.220.20 | |
| 09999 1979 | GOST 9999-79 | Direct recording electrical measuring instruments. General technical specifications | 17.220.20 | |
| 09999 1994 | GOST 9999-94 | Direct acting recording electrical measuring instruments and their accessories | 17.220.20 | |
| 10287 | GOST 10287-83 | Direct current meters. General specifications | 17.220.20 | |
| 10374 1982 | GOST 10374-82 | Multi-scale portable measuring instruments. General technical specifications | 17.220.20 | |
| 10374 1993 | GOST 10374-93 | Direct acting indicating analogue electrical measuring instruments and their accessories. Part 7. Special requirements for multi-function instruments | 17.220.20 | |
| 11013 | GOST 11013-81 | Moving-coil oscillograph galvanometers. General specifications | 17.220.20 | |
| 11282 1975 | GOST 11282-75 | D.C. Measuring voltage dividers. General technical specifications | 17.220.20 | |
| 11282 1993 | GOST 11282-93 | Direct-current resistive volt ratio boxes | 17.220.20
29.200 |
|
| 11859 1966 | GOST 11859-66 | Harmonic analizers. Methods and means for verification | 17.220
17.020 |
|
| 12152 1966 | GOST 12152-66 | Frequency characteristics meters and generators of fluctuating freqnency. Control methods | 17.220.20 | |
| 12692 1967 | GOST 12692-67 | Resonense frequency meters. Methods and means for verification | 17.220.20 | |
| 13384 1981 | GOST 13384-81 | Measuring transformers for thermocouple and resistance thermometers SSI. General technical conditions | 17.220.20 | |
| 13384 1993 | GOST 13384-93 | Measuring transducers for thermoelectric transducers and resistance thermotransducers. General technical requirements and methods of tests | 17.220 | |
| 13607 1968 | GOST 13607-68 | Digital electrical measuring instruments and converters. Fundamental terms and definitions | 01.040.17
17.220.20 |
|
| 14014 1982 | GOST 14014-82 | Digital instruments and measuring transducers of voltage, current and resistance. General specifications | 17.220.20 | |
| 14014 1991 | GOST 14014-91 | Digital instruments and measuring transducers of voltage, current and resistance. General technical requirements and methods of tests | 17.220.20 | |
| 14265 1979 | GOST 14265-79 | Direct acting analogue contact electrical measuring instruments. General specifications | 17.220.20 | |
| 16863 1971 | GOST 16863-71 | Measuring generators for frequency range 0,1-35 MHz. Methods and means of verification | 17.220.20
17.020 |
|
| 17363 1971 | GOST 17363-71 | Time multichannel analyzers. Methods of measurement of parameters | 17.220.20 | |
| 18627 1973 | GOST 18627-73 | Startstop and synchronous telegraph distortion meters. Types and main characteristics | 17.220.20 | |
| 19875 1979 | GOST 19875-79 | Electrical measuring recording fast-acting instruments. General specifications | 17.220.20 | |
| 19876 1981 | GOST 19876-81 | D.C. measuring digital bridges. General technical specifications | 17.220.20 | |
| 20493 1990 | GOST 20493-90 | Voltage detectors. General specifications | 17.220.20 | |
| 20493 2001 | GOST 20493-2001 | Voltage detectors. General specifications | 17.220.20 | |
| 20798 1975 | GOST 20798-75 | Mutual inductance actual measures. General specifications | 17.220.20 | |
| 20906 1975 | GOST 20906-75 | Measuring means for magnetic quantities. Terms and definitions | 01.040.17
17.220.20 |
|
| 21175 1975 | GOST 21175-75 | Inductance actual measures. General specifications | 17.220.20 | |
| 22261 1982 | GOST 22261-82 | Means for measuring of electrical quantities. General technical specifications | 17.220.20 | |
| 22261 1994 | GOST 22261-94 | Means for measuring electrical and magnetic quantities. General specifications | 17.220.20 | |
| 23217 1978 | GOST 23217-78 | Direct-reading indicating electrical measuring instruments. Marking symbols | 17.220.20 | |
| 23474 1979 | GOST 23474-79 | Cable apparatus. General technical requirements, acceptance rules and test methods | 17.220.20 | |
| 23624 1979 | GOST 23624-79 | Measuring laboratory current transformers. General specifications | 17.220.20 | |
| 23624 2001 | GOST 23624-2001 | Measuring laboratory current transformers. General specifications | 17.220.20 | |
| 23625 1979 | GOST 23625-79 | Measuring laboratory voltage transformers. General specifications | 17.220.20 | |
| 23625 2001 | GOST 23625-2001 | Measuring laboratory voltage transformers. General specifications | 17.220.20 | |
| 23706 1979 | GOST 23706-79 | Ohmmeters. General technical specifications | 17.220.20 | |
| 23706 1993 | GOST 23706-93 | Direct acting indicating analogue electrical measuring instruments and their accessories. Part 6. Special requirements for ohmmeters (impedance meters) and conductance meters | 17.220.20 | |
| 23737 1979 | GOST 23737-79 | Electric resistance measures. General specifications | 17.220.20 | |
| 23854 1979 | GOST 23854-79 | Level meters of electrical signals. General technical requirements and test methods | 17.220.20 | |
| 23913 1979 | GOST 23913-79 | Electrometric measurement means. General technical requirements | 17.220.20 | |
| 24855 1981 | GOST 24855-81 | Analogous transformers measuring current, voltage, capacity, friquency, resistance. General specifications | 17.220.20 | |
| 25242 1982 | GOST 25242-82 | A.C. Digital automatic balanced bridges. General specifications | 17.220.20 | |
| 25242 1993 | GOST 25242-93 | Digital instruments to measure immittance parameters. General technical requirements and methods of tests | 17.220.20 | |
| 25258 1982 | GOST 25258-82 | Electrometric measurement means. Acceptance rules and test methods | 17.220 | |
| 25372 1995 | GOST 25372-95 | Symbols for alternating-current electricity meters | 01.080.40
91.140.50 17.220.20 |
|
| 25990 1983 | GOST 25990-83 | Electrical active energy meters, accuracy class 2,0. Acceptance control | 17.220.20 | |
| 26033 1983 | GOST 26033-83 | Metering amplifiers of direct current and its voltage. General specifications | 17.220.20 | |
| 26033 1991 | GOST 26033-91 | Metering amplifiers of direct current and its voltage. The general technical requirements and the methods of tests | 17.220.20 | |
| 26035 1983 | GOST 26035-83 | Alternating current electronic electricity meters. General specifications | 17.220.20 | |
| 26364 1990 | GOST 26364-90 | Ferritometers for austenitic steels. General specifications | 17.220.20 | |
| 27537 1987 | GOST 27537-87 | Digital readout units. General specifications | 17.220.20 | |
| 30012-01 1993 | GOST 30012.1-93 | Direct acting indicating analogue electrical measuring instruments and their accessories. Part 1. Definitions and general requirements common to all parts | 17.220.20 | |
| 30012-01 2002 | GOST 30012.1-2002 | Direct acting indicating analogue electrical measuring instruments and their accessories. Part 1. Definitions and general requirements common to all parts | 17.220.20 | |
| 30012-09 1993 | GOST 30012.9-93 | Direct acting indicating analogue electrical measuring instruments and their accessories. Part 9. Methods of tests | 17.220 | |
| 30421 1996 | GOST 30421-96 | Electrical capacitance, pure resistance and dissipation factor high-voltage meters. General specifications | 17.220.20 | |
| 30605 1998 | GOST 30605-98 | Digital voltage and current measuring converters. General specifications | 17.220.20
29.200 |
|
| 30606 1998 | GOST 30606-98 | Digital converters for voltage or current measuring. Basic parameters. General technical requirements. Methods of tests | 17.220.20 | |
| 50355 1992 | GOST R 50355-92 | Digital instruments to measure immittance parameters. General technical requirements and methods of tests | 17.220.20 | |
| 51070 1997 | GOST R 51070-97 | Woltages instruments of electrical and magnetic fields. General technical requirements and methods of tests | 17.220.20 | |
| 51288 1999 | GOST R 51288-99 | Means for measuring electric and magnetic quantities. Exploitation documents | 17.220.20 | |
| 51317-03-08 1999 | GOST R 51317.3.8-99 | Electromagnetic compatibility of technical equipment. Signalling on low-voltage electrical installations. Emission levels, frequency bands and electromagnetic disturbance levels | 33.100
17.220.20 |
|
| 51317-04-15 1999 | GOST R 51317.4.15-99 | Electromagnetic compatibility of technical equipment. Flikermeter. Technical requirements and test methods | 33.100
17.220.20 |
|
| 51350 1999 | GOST R 51350-99 | Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 1. General requirements | 19.020
17.220.20 13.260 |
|
| 52319 2005 | GOST R 52319-2005 | Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 1. General requirements | 11.080
17.060 17.080 17.100 17.120 17.120.01 17.200.20 17.220 17.220.20 |
|
| 52320 | GOST R 52320-2005 | Electricity metering equipment (а.с). General requirements. Tests and test conditions. Part 11. Meters for electric energy | 17.220 | |
| 52321 | GOST R 52321-2005 | Electricity metering equipment (а.с). Particular requirements. Part 11. Electromechanical meters for active energy (classes 0,5; 1 and 2) | 17.220.20 | |
| 52322 | GOST R 52322-2005 | Electricity metering equipment (а.с). Particular requirements. Part 2I. Static meters for active energy (classes 1 and 2) | 17.220 | |
| 52323 | GOST R 52323-2005 | Electricity metering equipment (а.с). Particular requirements. Part 22. Static meters for active energy classes (0,2S and 0,5S) | 17.220 | |
| 52425 2005 | GOST R 52425-2005 | Electricity metering equipment (a.c.). Particular requirements. Part 23. Static meters for reactive energy | 17.220 | |
| 52555 2006 | GOST R 52555-2006 | Electricity metering equipment. Dependability. Part 11. General concepts | 17.220.20 | |
| 52718 2007 | ★ | GOST R 52718-2007 | Electricity metering equipment. Dependability. Part 21. Collection of meter dependability data from the field | 17.220.20 |
| ED1 07164 1978 | GOST ED1 7164-78 | Self-balancing servo instruments of SSI. General specifications. Export supplement | 17.220.20 | |
| IEC 61010-002-031 1999 | GOST R IEC 61010-2-031-99 | [withdrawn? =>GOST R IEC 61010-031-2005]
Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-031. Particular requirements for hand-held probe assemblies for electrical measurement and test |
19.020
13.260 17.220.20 |
|
| IEC 61010-002-032 1999 | GOST R IEC 61010-2-032-99 | Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for hand-held current clamps for electrical measurement and test | 19.020
13.260 17.220.20 |
|
| IEC 61037 2001 | GOST R IEC 61037-2001 | Electricity metering. Tariff and load control. Particular requirements for electronic ripple control receivers | 17.220 | |
| IEC 61038 2001 | GOST R IEC 61038-2001 | Electricity metering. Tariff and load control. Particular requirements for time switches | 17.220 | |
| IEC 61107 2001 | GOST R IEC 61107-2001 | Data exchange for meter reading, tariff and load control. Direct local data exchange | 17.220
35.110 |
|
| IEC 61142 2001 | GOST R IEC 61142-2001 | Data exchange for meter reading, tariff and load control. Local bus data exchange | 17.220.20
35.110 |
|
| IEC 61557-01 2005 | GOST R IEC 61557-1-2005 | Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 1. General requirements | 17.220.20
29.080 29.240 |
|
| IEC 61557-02 2005 | GOST R IEC 61557-2-2005 | Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 2. Insulation resistance | 17.220.20
29.080 29.240 |
|
| IEC 61557-03 2006 | GOST R IEC 61557-3-2006 | Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 3. Loop impedance | 17.220.20
29.080 29.240 |
|
| IEC 61557-04 2007 | ★ | GOST R IEC 61557-4-2007 | Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 4. Resistance of earth connection and equipotential bonding | 17.220.20
29.080 29.240 |
| IEC 61557-05 2008 | ★ | GOST R IEC 61557-5-2008 | Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 5. Resistance to earth | 17.220.20
29.080 29.240 |
| 17.240 |
放射線測定 注: 放射線防護→ 13.280 |
|||
| Sort | Mk | 規格番号 | 規格名称(英語) | 国際規格分類 ( ICSコードの説明 ) |
| 00002-733 1968 | GOST 2.733-68 | Unified system for designe documentation. Graphical symbols of radiation detectors in circuits | 01.080.99
17.240 |
|
| 00004-059 1979 | GOST 4.59-79 | Product-quality index system. Means of measuring ionizing radiations. Nomenclature of indices | 03.120
17.240 |
|
| 00008-0013 1972 | GOST 8.013-72 | State system for ensuring the uniformity of measurements. Condenser personnel dosimeters. Verification. Methods and means | 17.240 | |
| 00008-0031 1982 | GOST 8.031-82 | State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means of measuring neutron flux and its density | 17.240 | |
| 00008-0033 1984 | GOST 8.033-84 | State system for ensuring the uniformity of measurements. State primary ^standard and all-union verification schedule for means measuring the nuclide activity | 17.240 | |
| 00008-0033 1996 | GOST 8.033-96 | State system for ensuring the uniformity of measurements. State verification schedule for means measuring radionuclide activity flux and flux density of alfa-, beta-particles and photons of radionuclide source | 17.240 | |
| 00008-0034 1982 | GOST 8.034-82 | State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means measuring exposure dose, exposure dose rate and fluense energy of X-and-gamma radiation | 17.240 | |
| 00008-0035 1982 | GOST 8.035-82 | State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring absorbed dose and absorbed dose rate of beta-radiation | 17.240 | |
| 00008-0037 1981 | GOST 8.037-81 | State system for ensuring the uniformity of measurements. State primary standard and state verifications schedule for noise power spectral density measuring instruments within the frequency range fro 1,0 up to 37,5 ghz | 17.240 | |
| 00008-0039 1979 | GOST 8.039-79 | State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring nuclide activity in gases | 17.240 | |
| 00008-0040 1984 | GOST 8.040-84 | The state system for ensuringthe uniformity of measurements. Radiometers for measuring beta-contamination of surfaces. Calibration methods | 17.240 | |
| 00008-0041 1984 | GOST 8.041-84 | State system for ensuring the uniformity of measurements. Radiometers for measuring alpha-active substances contamination of surfaces. Calibration methods | 17.240 | |
| 00008-0070 1983 | GOST 8.070-83 | State system for ensuring the uniformity measurements. State primary standard of unit of absorbed dose rate of photon ionizing radiation | 17.240 | |
| 00008-0070 1996 | GOST 8.070-96 | State system for ensuring unisormity of measurements. State verification schedule for means measuring absorbed and equivalent dases and rate of absorbed and equivalent doses of photon and electron radiations | 17.240 | |
| 00008-0087 1981 | GOST 8.087-81 | State system for ensuring the uniformity of measurements. Dosimetriс set-ups for calibrating photon and electron radiation. Methods and means of calibration | 17.240
17.020 |
|
| 00008-0087 2000 | GOST 8.087-2000 | State system for ensuring the uniformity of measurements. Standart dosimetric installations for X-ray and gamma-radiation. Methods of calibration on the exposure dose rate and air kerma rate | 17.240 | |
| 00008-0090 1979 | GOST 8.090-79 | State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means, measuring specific radioactive aerosols concentration | 17.240 | |
| 00008-0105 1980 | GOST 8.105-80 | State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring neutron flux density and fluence at nuclear installations | 17.240 | |
| 00008-0191 1976 | GOST 8.191-76 | State system for ensuring the uniformity of measurement. State special standard and all-union verification schedule for means measuring radiation field parameters of antenna systems with operating dimensions of apertures from 0,1 to 0,4 m at the frequency range from 2,5 to 12 GHz | 17.240 | |
| 00008-0193 1976 | GOST 8.193-76 | State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring radiation field parameters of antenna systems with operating dimension of apertures from 0,75 to 1,5 m at the frequency range from 2,5 to 42 GHz | 17.240
33.120.40 |
|
| 00008-0198 | GOST 8.198-85 | State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring pulse laser radiation power and dynamic parameters of laser detectors in the wavelength range of 0,4-10,6 um | 17.240 | |
| 00008-0201 1976 | GOST 8.201-76 | State system for ensuring the uniformity of measurements. The state special standard and all-union verification schedule for means measuring instruments of maximum-energy flux of stopping radiation at photon energy from 0,8 to 8,0 pJ (5 to 50 MeV) | 17.240 | |
| 00008-0203 1976 | GOST 8.203-76 | State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring of absorbed dose of X-ray radiation at maximum energy from 3 to 9 pJ (20 to 60 keV) | 17.240 | |
| 00008-0273 1978 | GOST 8.273-78 | State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring radiant flux 1x10 in minus 6 degree to 1x10 in minus 2 degree W in the wavelength range of 0,4 - 1,4 um | 17.240 | |
| 00008-0275 1991 | ★ | GOST 8.275-91 | [withdrawn]
State system for ensuring the uniformity of measurements. State verification schedule for means, measuring laser output average power and laser pulse energy within the wavelength range of 0,3 to 12,0 um |
17.240 |
| 00008-0308 1978 | GOST 8.308-78 | State system of ensuring the uniformity of measurements. Functional units, sub-assemblies and devices in instruments for measurement of ionizing radiation. Counters of pulses. Methods and means of verification | 17.240 | |
| 00008-0309 1978 | GOST 8.309-78 | State system for ensuring the uniformity of measurements. Highly directional antennas. The technique of measurements for determining parameters by the aperture field | 17.240
33.120.40 |
|
| 00008-0347 1979 | GOST 8.347-79 | State system for ensuring the uniformity of measurements. The state primary standard and all-union verification schedule for means measuring absorbed dose rate and equivalent dose rate of neutron radiation | 17.240 | |
| 00008-0355 1979 | GOST 8.355-79 | State system for ensuring the uniformity of measurements. Neutron radiometers. Methods and means of verification | 17.240 | |
| 00008-0357 1979 | GOST 8.357-79 | State system for ensuring the uniformity of measurements. Laser radiation measuring instruments. Energy, spectral and time renges | 17.240 | |
| 00008-0413 1981 | GOST 8.413-81 | State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring radiation field parameters of antenna systems with operating dimensions of apertures from 0,40 to 0,75m at the frequency range from 8.2 тo 40,0 GHz | 17.240
33.120.40 |
|
| 00008-0414 1981 | GOST 8.414-81 | State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring radiation field parameters of antenna systems with operating dimensions of apertures from 1,5 to 3,0 m at the frequency range from 2,5 to 40,0 GHz | 17.240
33.120.40 |
|
| 00008-0443 1981 | GOST 8.443-81 | State system of ensuring the uniformity of measurements. Standard instruments for monopulse and modulated puls laser radiation peak power measurements. Methods and means for verification | 17.240
17.020 |
|
| 00008-0444 1981 | GOST 8.444-81 | State system of ensuring the uniformity of measurements. Standard instruments for dynamic parameter measurements of puls laser measuring transducers. Methods and means for verification | 17.240
17.020 |
|
| 00008-0445 1981 | GOST 8.445-81 | State system for ensuring the uniformity of measurements. Standard means mesuring laser output average power. Methods and means for verification | 17.240
17.020 |
|
| 00008-0452 1982 | GOST 8.452-82 | State system for ensuring the uniformity of measurements. Radioisotope X-ray devices. Methods and means for verification | 17.240 | |
| 00008-0473 1982 | GOST 8.473-82 | State system for ensuring the uniformity of measurements. State special standard and state verification schedule for measuring exposure dose, mean exposure rate, mean energy fluence and mean density of pulsed Х-ray radiation fluence energy | 17.240 | |
| 00008-0483 1983 | GOST 8.483-83 | State system for ensuring the uniformity of measurements. Reference neutren sources at nuclear instollations general statements and metrological certification | 17.240
27.120.30 |
|
| 00008-0496 1983 | GOST 8.496-83 | State system for ensuring the uniformity of measurements. Radiation safety. Quality factor of ienizing radiations | 17.240
13.280 |
|
| 00008-0521 1984 | GOST 8.521-84 | State system for ensuring the uniformity of measurements. Sets for calibrating neutron radiation. Methods of verification | 17.240 | |
| 00008-0526 1985 | GOST 8.526-85 | State system for ensuring the uniformity of measurements. Radiometers of natural radioactive aerosels. Verification procedure | 17.240 | |
| 00008-0527 1985 | GOST 8.527-85 | State system for ensuring the uniformity of measurements. Measuring instruments of artifical radioactive aerosols volumetric activity. Verification procedure | 17.240 | |
| 00008-0529 1985 | GOST 8.529-85 | State system for ensyring the uniformity of measurements. Measuring instruments of a volumetric astivity of the vaporous iodine-131. Methods of verification | 17.240 | |
| 00008-0534 1985 | GOST 8.534-85 | State system for ensuring the unification of measurements. State special standard and state verification schdule for means measuring radiation field parameters of antenna systems with aperture dimensions from 5 to 100 m and of the airborne antennas within the frequency range from 0,3 to 3,0 GHz | 17.240
33.120.40 |
|
| 00008-0586 2001 | GOST R 8.586-2001 | State system for ensuring the uniformity of measurements. Instruments measuring the characteristics of artificial and natural radiation for the safety of museum exhibits. Methods for verification | 17.020
17.240 |
|
| 00008-0587 2001 | GOST R 8.587-2001 | State system for ensuring the uniformity of measurements. Instruments measuring the characteristics of optical radiation of solar simulators. Methods for verification | 17.020
17.240 |
|
| 00008-0588 2001 | GOST R 8.588-2001 | State system for ensuring the uniformity of measurements. Ultraviolet radiometers for ozone monitoring. Methods for verification | 17.020
17.240 |
|
| 00008-0590 2001 | GOST R 8.590-2001 | State system for ensuring the uniformity of measurements. Instruments measuring the characteristics of ultraviolet radiation in labour safety. Methods for verification | 17.020
17.240 |
|
| 00008-0594 2002 | GOST R 8.594-2002 | State system for ensuring the uniformity of measurements. The metrological ensuring of radiation control. General principles | 17.020
17.240 |
|
| 00022-08-08 2001 | GOST R 22.8.08-2001 | Safety in emergencies. Method of external gamma rays absorbed dose determination by thermoluminescence of quartz extracted from building ceramics. The order of carrying out measurements | 17.240
13.280 |
|
| 13760 1968 | GOST 13760-68 | Emanometers type ЭМ-6. Methods and instruments of their calibration | 17.240
17.020 |
|
| 14105 1976 | GOST 14105-76 | Radiation detectors. Terms and definitions | 01.040.17
17.240 |
|
| 14336 1987 | GOST 14336-87 | Instruments using a source of ionizing radiation. Terms and definitions | 01.040.17
17.240 |
|
| 14337 1978 | GOST 14337-78 | Ionizing radiation measuring instruments. Terms and definitions | 01.040.17
17.240 |
|
| 14642 1969 | GOST 14642-69 | Functional units, sub-assemblies and devices used in instruments for measurement of ionizing radiation. Terms and definitions | 01.040.17
17.240 |
|
| 15484 1981 | GOST 15484-81 | Ionizing radiations and their measurements. Terms and definitions | 01.040.17
17.240 |
|
| 15822 1970 | GOST 15822-70 | Cups and planchets for radioactive samples. Design and marking | 17.240 | |
| 16839 1971 | GOST 16839-71 | Scintillation detector units of ionizing radiation. Basic dimensions | 17.240 | |
| 16957 1980 | GOST 16957-80 | Multichannel amplitude analyzers. Basic parameters and general technical requirements | 17.240 | |
| 17038-00 1979 | GOST 17038.0-79 | Ionizing radiation scintillation detectors. Commonrules for methods of scintillation parameters measurements | 17.240 | |
| 17038-01 1979 | GOST 17038.1-79 | Ionizing radiation scintillation detectors. Methods for measurement of non-linearity and instability of installation for determination of scintillation detector parameters | 17.240 | |
| 17038-02 1979 | GOST 17038.2-79 | Ionizing-radiation scintillation detectors. Method for measurement of detector light yield of full absorption peak or compton distribution edge | 17.240 | |
| 17038-03 1979 | GOST 17038.3-79 | Ionizing-radiation scintillation detectors. Method for measurement of detector light yield of photomultiplier anode current | 17.240 | |
| 17038-04 1979 | GOST 17038.4-79 | Ionizing-radiation scintillation detectors. Method for measurement of relative scintillator efficiency | 17.240 | |
| 17038-05 1979 | GOST 17038.5-79 | Ionizing-radiation scintillation detectors. Method for measurement of photomultiplier spectrometric constant used for detector scintillation parameter determination | 17.240 | |
| 17038-06 1979 | GOST 17038.6-79 | Ionizing-radiation scintillation detectors. Method for measurement of intrinsic and given detector resolution | 17.240 | |
| 17038-07 1979 | GOST 17038.7-79 | Ionizing-radiation scintillation detectors. Methods for measurement of effective light attenuation index of scintillation in detector | 17.240 | |
| 17038-08 1989 | GOST 17038.8-89 | Ionizing radiation scintillation detectors. Methods for measuring detector background and intrinsic background | 17.240 | |
| 17134 1980 | GOST 17134-80 | Relay type radioisotope instruments. General specifications | 17.240 | |
| 17138 1981 | GOST 17138-81 | Equipment for monitoring fuel element ruptures in nuclear reactors of nuclear power stations. General technical requirements and test methods | 27.120.10
17.240 |
|
| 17209 1989 | GOST 17209-89 | Measuring instruments of radionuclide volume activity in liquid. General technical requirements and test methods | 17.240 | |
| 17225 1985 | GOST 17225-85 | Radiometres for metering covers on alfa and beta activity dirt. General technical requirements and test methods | 17.240 | |
| 17226 1971 | GOST 17226-71 | Measureres for exposure rate measuring of gamma and X radiations with photon energy of 8 to 480 fj. Technical requirements and test methods | 17.240 | |
| 18166 1972 | GOST 18166-72 | lonizing-radiation detector units.
Basic dimensions |
17.240 | |
| 18177 1981 | GOST 18177-81 | Semiconductor detectors of ionizing radiation.
Terms and definitions |
01.040.17
17.240 |
|
| 18229 1981 | GOST 18229-81 | Spektrometric charge-sensitive preamplifiers for semiconductor radiation detectors. Types, basic parameters and methods of measurements | 17.240 | |
| 18230 1972 | GOST 18230-72 | Power supplies spectrometric semiconductor radiation detectors. Types and basic parameters | 17.240 | |
| 18398 1981 | GOST 18398-81 | The ionizing radiation germanium detectors for spectrometry. General specifications | 17.240 | |
| 18622 1979 | GOST 18622-79 | Interaction of ionizing radiations with matter. Chemical composition tissue eguivalent matter | 17.240 | |
| 18668 1973 | GOST 18668-73 | Ionization chamber for radioactive instrument. Types and main parameters | 17.240 | |
| 19154 1973 | GOST 19154-73 | Signals electric, input and output of ionizing radiation measuring devices, their functional nits and assemblies. General specifications | 17.240 | |
| 19189 1973 | GOST 19189-73 | Gas ionizing radiation detectors. Terms and definitions | 01.040.17
17.240 |
|
| 19868 1974 | GOST 19868-74 | Spectrometric linear amplifiers for transistorized detectors of ionizing radiations. Methods of measuring parameters | 17.240 | |
| 20268 1983 | GOST 20268-83 | Gamma radiation detectors standard glucose type DOG-0,05/2. Specifications | 17.240 | |
| 20766 1975 | GOST 20766-75 | Ionizing radiation semiconductor spectrometer detectors. Types and basic parameters | 17.240 | |
| 21496 1989 | GOST 21496-89 | Measuring instruments of radionuclide volume activity in gas. General technical requirements and test methods | 17.240 | |
| 22251 1989 | GOST 22251-89 | Measuring instruments of radioactive artificial aerosol volume activity. General technical requirements and test methods | 17.240 | |
| 22252 1982 | GOST 22252-82 | Multichannel amplitude analyzers. Methods of parameters measurements | 17.240 | |
| 22988-00 1978 | GOST 22988.0-78 | Gas caunters. Methods of characteristic measurement. General principles | 17.240 | |
| 22988-01 1978 | GOST 22988.1-78 | Gas caunters. Method of threshold voltage measurement | 17.240 | |
| 22988-02 1978 | GOST 22988.2-78 | Gas caunters. Method of corona descharge voltage measurement | 17.240 | |
| 23077 1978 | GOST 23077-78 | The ionizing radiation scintillation detectors. Terms, definitions and literal symbols | 01.040.17
17.240 |
|
| 23923 1989 | GOST 23923-89 | Measuring instruments of radionuclide specific activity. General technical requirements and test methods | 17.240 | |
| 24469 1980 | GOST 24469-80 | Instruments for measurements laser radiation parameters. General technical requirements | 17.240 | |
| 25368 1982 | GOST 25368-82 | Means for measurement of pulse laser radiation maximum power. Types and main parameters. Measuring methods | 17.240 | |
| 25645-145 | GOST 25645.145-88 | [?] | 17.240 | |
| 25645-151 1990 | GOST 25645.151-90 | Solar hard X-ray. Energy spectrum | 17.240 | |
| 25645-165 2001 | GOST R 25645.165-2001 | Solar energetic particles. Probabilistic model for proton fluxes | 17.240 | |
| 25645-335 1994 | GOST R 25645.335-94 | Spacecrafts. Gamma-activity characteristics induced in structural materials | 49.025
17.240 |
|
| 25811 1983 | GOST 25811-83 | Means measuring laser output average power. Types. Basic parameters. Measuring methods | 17.240 | |
| 25851 1983 | GOST 25851-83 | Radiometric instruments. Methods of main parameters measurement | 17.240 | |
| 25935 1983 | GOST 25935-83 | Dosimetric instruments, measurement methods of main parameters | 17.240 | |
| 26222 1986 | GOST 26222-86 | Ionizing-radiation semiconductor detectors. Methods of parameters measurement | 17.240 | |
| 26344-00 1984 | GOST 26344.0-84 | Nuclear instrumentation for nuclear power stations. Basic principles | 27.120.20
17.240 |
|
| 26652 1985 | GOST 26652-85 | Scintillation detection blocks. General requirements and test methods | 17.240 | |
| 26874 1986 | GOST 26874-86 | Ionizing radiation power spectrometers. Methods of basic parameters measurement | 17.240 | |
| 26995 1986 | GOST 26995-86 | Ionization gas-discharge detectors. Specifications | 17.240 | |
| 27172 1986 | GOST 27172-86 | Detector sets of ionizing radiations for spectrometry. Types and general parameters | 17.240 | |
| 27173 1986 | GOST 27173-86 | Detector sets of ionizing radiations for spectrometry. General technical specification | 17.240 | |
| 27297 1987 | GOST 27297-87 | Nuclear instrument making items. Control equipment for shell states of fuel elements of nuclear reactors. General technical requirements and test methods | 17.240
27.120.10 |
|
| 27445 1987 | GOST 27445-87 | Neutron flux monitoring systems for control and protection of nuclear reactors. General technical requirements | 27.120.10
17.240 13.280 |
|
| 27451 1987 | GOST 27451-87 | Ionizing radiation measuring means. General specifications | 17.240 | |
| 27452 1987 | GOST 27452-87 | Safety radiation control apparatus for nuclear power stations. General technical requirements | 27.120.20
17.240 |
|
| 27841 1988 | GOST 27841-88 | Scintillators and containers of ionizing radiation detectors. Dimensions | 17.240 | |
| 27961 1988 | GOST 27961-88 | Detector sets of X-radiation for spectrometry. Test methods | 17.240 | |
| 28031 1989 | GOST 28031-89 | Ionization chambers for radioisotope instruments. General technical requirements | 17.240 | |
| 28129 1989 | GOST 28129-89 | Test tubes for radioactive samples and stoppers for them. Basic dimensions | 17.240 | |
| 28258 1989 | GOST 28258-89 | Radioisotope X-ray devices. Types, мain parameters and technical requirements | 17.240 | |
| 28271 1989 | GOST 28271-89 | Portable radiometric and dosimetric instruments. General technical requirements and test methods | 17.240 | |
| 28488 1990 | GOST 28488-90 | Multichannel analyzers as multichannel scalers. Test methods | 17.240 | |
| 29074 1991 | GOST 29074-91 | Equipment for monitoring of radiation situation. General requirements | 13.280
17.240 |
|
| 29075 1991 | GOST 29075-91 | Nuclear instrumentation systems for nuclear power stations. General requirements | 27.120.20
17.240 |
|
| 29115 1991 | GOST 29115-91 | Detector sets of gamma radiation for spectrometry. Metods basic parameters measurement | 17.240 | |
| 29279 1992 | GOST 29279-92 | Multichannel pulse height analyzers. Characteristics and test methods of time-to-amplitude converters | 17.240 | |
| 51570 2000 | GOST R 51570-2000 | Decontamination of territories. Method for determination of penetration depth of cesium-137 into the soil | 17.240
13.280 |
|
| 51713 2001 | GOST R 51713-2001 | Ingots of ferrous and non-ferrous metals. Permissible levels of specific activity of the radionuclides. Method of radioation control | 77.040.20
17.240 |
|
| 51724 2001 | GOST R 51724-2001 | Shielded facilities, spaces, installations. Reduced geomagnetic field. Measuring methods and assessment of field intensity compliance with technical requirements and hygiene standards | 33.020
17.240 |
|
| 51919 2002 | GOST R 51919-2002 | Radionuclide ionizing radiation sealed sources. Leakage test methods | 27.120.30
17.240 |
|
| 51963 2002 | GOST R 51963-2002 | Standard radionuclide solutions and standard ionizing radiation radionuclide sources. Verification certificate contents | 17.240 | |
| 52125 2003 | GOST R 52125-2003 | Sealed radionuclide X-radiation sources. Methods of parameters measurement | 17.240 | |
| IEC 61066 1993 | GOST R IEC 1066-93 | Thermoluminescene dosimetry systems for personal and environmental monitoring. General technical requirements and test methods | 13.280
17.240 |
|
| Sort | Mk | 規格番号 | 規格名称(英語) | 国際規格分類 ( ICSコードの説明 ) |
ご意見、ご要望、ご質問 はお気軽に