手持ちの情報を整理したものであり、規格原本による確認は行っていません。
すべてを網羅しているわけでも、正確さ、最新性を保証するものではありませんので、 規格原本などで確認してください。
中国語名称を表示する場合は、ブラウザ(IE6等)の エンコードを日本語(シフトJIS)とし、 日本語のフォントをMS UI Gothic等に指定してください。

ICS 国際規格分類	中国標準分類	規格番号	規格名称(中国語)	規格名称(英語)	国際整合
83.160.10	G41	GB/T 518-1997	摩托车轮胎	Motorcycle tyres	EQV JIS K 6366-1994
83.160	G41	GB/T 519-1993	充气轮胎物理机械性能试验方法	Test method of the physical mechanical properties for pneumatic tyres
83.160	G41	GB/T 521-1993	轮胎外缘尺寸测定方法	Method of measuring tyre peripheral dimensions	NEQ ISO 4209/1-86
83.060	G40	GB/T 528-1998	硫化橡胶或热塑性橡胶拉伸应力应变性能的测定	Rubber,vulcanized or thermoplastic-Determination of tensile stress-strain properties	EQV ISO 37:1994
83.060	G40	GB/T 529-1999	硫化橡胶或热塑性橡胶撕裂强度的测定（裤形、直角形和新月形试样）	Rubber,vulcanized or thermoplastic--Determination of tear strength (Trouser,angle and crescent test pieces)	EQV ISO 34-1:1994
83.040.20	G40	GB/T 531-1999	橡胶袖珍硬度计压入硬度试验方法	Rubber--Determination of indentation hardness by means of pocket hardness meters	IDT ISO 7619:1986
83.060	G40	GB/T 532-1997	硫化橡胶或热塑性橡胶与织物粘合强度的测定	Rubber,vulcanized or thermoplastic--Determination of adhesion to textile fabric	IDT ISO 36:1993
83.140	Q61	GB/T 539-1995	耐油石棉橡胶板	Oil-resisting asbestos-rubber sheets
83.140	Q61	GB/T 542-1983	石棉橡胶板 柔软性试验方法	Test method for flexibility of asbestos-rubber sheets
83.080	G31	GB/T 1033-1986	塑料密度和相对密度试验方法	Test method for density and relative density of plastics	EQV ISO/DIS 1183-84
83.080	G31	GB/T 1034-1998	塑料吸水性试验方法	Plastics--Determination of water absorption	EQV ISO 62-1980(E)
83.080	G31	GB/T 1035-1970	塑料耐热性 (马丁) 试验方法	Test method for thermostability of plastics (Martin)
83.080	G31	GB/T 1036-1989	塑料线膨胀系数测定方法	Determination for coefficient of linear expansion of plastics	NEQ ANSI/ASTM D696-79
83.140	G31	GB/T 1037-1988	塑料薄膜和片材透水蒸气性试验方法 杯式法	Test method for water vapor transmission of plastic film and sheet--Cup method	NEQ ASTM E96-80
83.140.10	G31	GB/T 1038-2000	塑料薄膜和薄片气体透过性试验方法 压差法	Plastics--Film and sheeting--Determination of gas transmission--Differential-pressure method	NEQ ISO 2556:1974
83.080	G31	GB/T 1039-1992	塑料力学性能试验方法总则	Plastics--General rules for the test method of mechanical properties
83.080	G32	GB/T 1040-1992	塑料拉伸性能试验方法	Plastics--Determination of tensile properties
83.080	G31	GB/T 1041-1992	塑料压缩性能试验方法	Plastics--Determination of compressive properties	IDT ISO 604-73
83.140	G32	GB/T 1043-1993	硬质塑料简支梁冲击试验方法	Plastics-Determination of charpy impact strength of rigid materials	NEQ ISO 179-82
83.160.30	G41	GB/T 1190-2001	工程机械轮胎技术要求	Technical specification of earth-mover tyres
83.160.30	G41	GB/T 1192-1999	农业轮胎	Agricultural tyres	NEQ ISO 4251-1,2,4:1992
83.060	G40	GB/T 1232.1-2000	未硫化橡胶 用圆盘剪切粘度计进行测定 第1部分: 门尼粘度的测定	Rubber,unvulcanized--Determinations using a shearing-disc viscometer--Part 1: Determination of mooney viscosity	EQV ISO 289-1:1994
83.060	G40	GB/T 1233-1992	橡胶胶料初期硫化特性的测定 门尼粘度计法	Rubber, unvulcanized--Determination of prevulcanization characteristics--Shearing disk method	NEQ ISO 667-81
83.140	G32	GB 1404-1995	酚醛模塑料	Phenolic moulding materials	NEQ ISO 800-92
83.120	Q23	GB/T 1447-1983	玻璃纤维��强塑料拉伸性能试验方法	Test method for tensile properties of glass fiber-reinforced plastics
83.120	Q23	GB/T 1446-1983	纤维��强塑料性能试验方法总则	The generals of test methods for properties of fiber-reinforced plastics
83.120	Q23	GB/T 1448-1983	玻璃纤维��强塑料压缩性能试验方法	Test method for compressive properties of glass fiber-reinforced plastics
83.120	Q23	GB/T 1449-1983	玻璃纤维��强塑料弯曲性能试验方法	Test method for flexural properties of glass fiber-reinforced plastics
83.120	Q23	GB/T 1450.1-1983	玻璃纤维��强塑料层间剪切强度试验方法	Test method for interlaminar shear strength of glass fiber-reinforced plastics
83.120	Q23	GB/T 1450.2-1983	玻璃纤维��强塑料冲压式剪切强度试验方法	Test method for the punch-type of strength of glass fiber-reinforced plastics
83.120	Q23	GB/T 1451-1983	玻璃纤维��强塑料简支梁式冲击韧性试验方法	Test method for the charpy impact resistance of glass fiber-reinforced plastics
83.120	Q23	GB/T 1457-1988	夹层结构滚筒剥离试验方法	Test method for climbing drum peel of sandwich constructions
83.120	Q23	GB/T 1458-1988	纤维缠绕��强塑料环形试样拉伸试验方法	Test method for tensile strength of ring of filament- winding reinforced plastics	NEQ ASTM D2290-76
83.120	Q23	GB/T 1461-1988	纤维缠绕��强塑料环形试样剪切试验方法	Test method for interlaminar shear strength of ring of filament-winding reinforced plastics	NEQ ASTM D2344-76
83.120	Q23	GB/T 1462-1988	纤维��强塑料吸水性试验方法	Test methods for water absorption of fiber reinforced plastics	NEQ ISO 62-80
83.120	Q23	GB/T 1463-1988	纤维��强塑料密度和相对密度试验方法	Test methods for density and relative density of fiber reinforced plastics
ICS 国際規格分類	中国標準分類	規格番号	規格名称(中国語)	規格名称(英語)	国際整合
83.080	G31	GB/T 1632-1993	聚合物稀溶液粘数和特性粘数测定	Determination of viscosity number and limiting viscosity number of polymers in dilute solution	EQV ISO-1628/1-1984
83.080.20	G31	GB/T 1633-2000	热塑性塑料维卡软化温度(VST)的测定	Plastics--Thermoplastic materials--Determination of vicat softening temperature(VST)	IDT ISO 306:1994
83.080	G31	GB/T 1634-1979	塑料弯曲负载热变形温度 (简称热变形温度) 试验方法	Test method of heat deflection temperature underbending load for plastics
83.080	G31	GB/T 1636-1979	模塑料表观密度试验方法	Test method for apparent density of moulding plastic materials
83.060	G34	GB/T 1681-1991	硫化橡胶回弹性的测定	Rubber - Determination of rebound resilience of vulcanizates	EQV ISO 4662-86
83.060	G40	GB/T 1682-1994	硫化橡胶低温脆性的测定 单试样法	Rubber, vulcanized--Determination of low-temperature brittleness(single test piece method)	EQV ISO 812-91
83.060	G34	GB/T 1684-1985	硫化橡胶短时间静压缩试验方法	Vulcanized rubber--Testing short time static compression	NEQ ΓOCT 265-77
83.060	G34	GB/T 1685-1982	硫化橡胶在常温和高温下压缩应力松弛的测定	Rubber, vulcanized--Determination of stress relaxation in compression at normal and at elevated temperature
83.060	G40	GB/T 1687-1993	硫化橡胶在屈挠试验中温升和耐疲劳性能的测定 第二部分: 压缩屈挠试验	Rubber, vulcanized--Determination of temperature rise and resistance to fafigue in flexometer testing--Part 2: Compression flexometer	NEQ ISO 4666/3-82
83.060	G34	GB/T 1688-1986	硫化橡胶伸张疲劳的测定	Rubber, vulcanized--Determination of tension fatigue
83.060	G34	GB/T 1689-1998	硫化橡胶耐磨性能的测定(用阿克隆磨耗机)	Rubber vulcanized-Determination of abrasion resistance(Akron machine)	NEQ BS 903:Part A9:1988
83.060	G40	GB/T 1690-1992	硫化橡胶耐液体试验方法	Rubber, vulcanized-Determination of the effect of liquids	NEQ ISO 1817-85
83.060	G40	GB/T 1692-1992	硫化橡胶绝缘电阻率测定	Vulcanized rubber--Determination of the insulation resistivity
83.060	G34	GB/T 1693-1981	硫化橡胶工频介电常数和介质损耗角正切值的测定方法	Vulcanized rubber--Determination for industrial frequency dielectric constant and dielectric loss angular tangent value	EQV ASTM D150-81
83.060	G34	GB/T 1694-1981	硫化橡胶高频介电常数和介质损耗角正切值的测定方法	Vulcanized rubber--Test method for HF dielectric constant and dielectric loss angular tangent value	EQV ASTM D150-81
83.060	G34	GB/T 1695-1981	硫化橡胶工频击穿介电强度和耐电压的测定方法	Vulcanized rubber--Test method for industrial frequency puncture voltage and dielectric strength	EQV ASTM D149-81
83.060	G34	GB/T 1696-2001	硬质橡胶弯曲强度的测定	Ebonite-Determination of cross breakiing strength	EQV ГOCT 255:1990
83.060	G34	GB/T 1697-2001	硬质橡胶冲击强度的测定	Ebonite-Determination of impact strength	EQV ГOCT 258-75(90)
83.060	G34	GB/T 1698-1982	硬质橡胶硬度的测定	Ebonite--Determination of hardness by means of a durometer
83.060	G34	GB/T 1699-1982	硬质橡胶耐热试验方法	Ebonite--Method of test for resistance to heating
83.060	G34	GB/T 1700-2001	硬质橡胶抗剪切强度的测定	Ebonite-Determination of shearing strength	EQV ГOCT 211-75(81)
83.060	G34	GB/T 1701-2001	硬质橡胶拉伸强度和拉断伸长率的测定	Ebonite-Determination of tensile strength and elongation at break	EQV ASTM D 2707-85(89)
83.160.10	G41	GB/T 1702-1997	力车轮胎	Cycle tyres	EQV JIS K6302-1994
83.160.10	G41	GB/T 1703-1997	力车内胎	Cycle inner tubes	EQV JIS K6304-1994
83.160	G41	GB 1795-1996	轮胎气门芯	Tyre valve core	NEQ JIS D 4211-88
83.160	G41	GB 1796-1996	轮胎气门嘴	Tyre valve
83.080	G32	GB/T 1841-1980	聚烯烃树脂稀溶液粘度试验方法	Test method for the viscosity of the dilute solution of polyolefine resin
83.080.20	G31	GB/T 1842-1999	聚乙烯环境应力开裂试验方法	Test method for environmental stress-cracking of polyethylene plastics	EQV ASTM D1693:1997
83.080.01	G32	GB/T 1843-1996	塑料悬臂梁冲击试验方法	Plastics--Determination of izod impact strength	EQV ISO 180-1993
83.080.01?	G32	GB/T 1844.1-1995	塑料及树脂缩写代号 第一部分:基础聚合物及其特征性能	Symbols of plastics and resins--Part 1: Basic polymers and their special characteristics	NEQ ISO 1043.1-87
83.040.30?	G32	GB/T 1844.2-1995	塑料及树脂缩写代号 第二部分:填充及��强材料	Symbols of plastics and resins--Part 2: Fillers and reinforcing materials	NEQ ISO 1043.2-87
83.040.30?	G32	GB/T 1844.3-1995	塑料及树脂缩写代号 第三部分:�搗Y剂	Symbols of plastics and resins--Part 3: Plasticizers	NEQ ISO 1043.3-87
83.080.20	G31	GB/T 1845.1-1999	聚乙烯(PE)模塑和挤出材料 第1部分: 命名系统和分类基础	Polyethylene(PE) moulding and extrusion materials--Part 1: Designation system and basis for specifications	EQV ISO 1872-1:1993
83.080.20	G32	GB/T 1846-1980	聚氯醚树脂稀溶液粘度试验方法	Test method for the viscosity of the dilute solution of polychloroether resin
83.080.20	G32	GB/T 1847-1980	聚甲醛树脂稀溶液粘度试验方法	Test method for the viscosity of the dilute solution of polyformaldehyde resin
ICS 国際規格分類	中国標準分類	規格番号	規格名称(中国語)	規格名称(英語)	国際整合
83.080.01	G31	GB/T 2035-1996	塑料术语及其定义	Terms and definitions for plastics	EQV ISO 472-1988
83.080	G31	GB/T 2406-1993	塑料燃烧性能试验方法 氧指数法	Plastics--Determination of flammability by oxygen index	NEQ ISO 4589-84
83.080	G31	GB/T 2407-1980	塑料燃烧性能试验方法 炽热棒法	Plastics--Combustion performance test--Blazing rod method	EQV DIN 53459-75
83.080.01	G31	GB/T 2408-1996	塑料燃烧性能试验方法 水平法和垂直法	Plastics--Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source	EQV ISO 1210-1992
83.080	G31	GB/T 2409-1980	塑料黄色指数试验方法	Plastics--Yellow index test method	EQV ASTM D1925-77
83.080	G31	GB/T 2410-1980	透明塑料透光率和雾度试验方法	Transparent plastics--Transmissivity and haze test	EQV ASTM D1003-77
83.080	G31	GB/T 2411-1980	塑料邵氏硬度试验方法	Plastics--Shore hardness test	EQV ISO 868-78
83.080	G32	GB/T 2412-1980	聚丙烯等规指数测试方法	Polypropylene--Method of determination of normal indices
83.140	G40	GB/T 2438-1981	硬质橡胶压碎强度的测定方法	Ebonite--Determination of crushing strength	IDT ISO 2474-72
83.060	G40	GB/T 2439-2001	硫化橡胶或热塑性橡胶 导电性能和耗散性能电阻率的测定	Conducting and dissipative rubbers,vulcanized or thermoplastic--Measurement of resistivity	IDT ISO 1853:1998
83.080	G31	GB/T 2546-1988	聚丙烯和丙烯共聚物材料命名	Designation of polypropylene and propylene copolymer materials	NEQ ISO 1873/1-86
83.080	G31	GB/T 2547-1981	塑料树脂取样方法	Plastic resins--Sampling	EQV ASTM D898-79
83.080	Q23	GB/T 2567-1995	树脂浇铸体性能试验方法总则	The generals of test methods for properties of resin casting body
83.080	Q23	GB/T 2568-1995	树脂浇铸体拉伸性能试验方法	Test method for tensile properties of resin casting body
83.080	Q23	GB/T 2569-1995	树脂浇铸体压缩性能试验方法	Test method for compressive properties of resin casting body	NEQ ISO 604-93
83.080	Q23	GB/T 2570-1995	树脂浇铸体弯曲性能试验方法	Test method for flexural properties of resin casting body
83.080	Q23	GB/T 2571-1995	树脂浇铸体冲击试验方法	Test method for impact resistance of resin casting body	NEQ ISO 179-82
83.120	Q23	GB/T 2572-1981	玻璃钢平均线膨胀系数试验方法	Glass fiber reinforced plastics--Average linear expansion factor of fiber--Method of testing
83.120	Q23	GB/T 2573-1989	玻璃纤维��强塑料大气暴露试验方法	Test method for atmosphere exposure of glass fiber reinforced plastics	NEQ ISO 4607-78
83.120	Q23	GB/T 2574-1989	玻璃纤维��强塑料湿热试验方法	Test method for resistance of glass fiber reinforced plastics to damp heat
83.120	Q23	GB/T 2575-1989	玻璃纤维��强塑料耐水性试验方法	Test method for resistance of glass fiber reinforced plastics to water
83.120	Q23	GB/T 2576-1989	纤维��强塑料树脂不可溶分含量试验方法	Test method for insoluble matter content of resin used in fiber reinforced plastics
83.120	Q23	GB/T 2577-1989	玻璃纤维��强塑料树脂含量试验方法	Test method for resin content of glass fiber reinforced plastics
83.120	Q23	GB/T 2578-1989	纤维缠绕��强塑料环形试样制作方法	Fabrication method of ring test specimen for filament -winding reinforced plastics	NEQ ASTM 2291-83
83.180	G38	GB/T 2790-1995	胶粘剂180°剥离强度试验方法 挠性材料对刚性材料	Adhesives, 180° peel strength test method for a flexible-bonded-to-rigid test specimen assembly	EQV ISO 8510/2-90
83.180	G38	GB/T 2791-1995	胶粘剂T剥离强度试验方法 挠性材料对挠性材料	Adhesives, T peel strength test method for a flexible-to-flexible test specimen assembly	NEQ BS 5350-79
83.180	G38	GB/T 2792-1998	压敏胶粘带180°剥离强度试验方法	Test method for peel strength of pressure-sensitive tape at 180°angle	EQV JIS E 0237-1991
83.180	G38	GB/T 2793-1995	胶粘剂不挥发物含量的测定	Test method for nonvolatile content of adhesives	EQV JIS K 6833-80
83.180	G39	GB/T 2794-1995	胶粘剂粘度的测定	Determination methods for viscosity of adhesives	EQV ASTM D 1084-88
83.120	Q34	GB/T 2843-1981	钢化玻璃抗冲击性试验方法 (227克钢球试验)	The method of tempered glass impact test ( 227g steel ball test)
83.080	G32	GB/T 2895-1982	不饱和聚酯树脂酸值的测定	Determination for acid value of unsaturated polyester resins
83.080	G31	GB/T 2913-1982	塑料白度试验方法	Test for whiteness of plastics
83.080.20	G31	GB/T 2914-1999	塑料 氯乙烯均聚和共聚树脂 挥发物(包括水)的测定	Plastics--Homopolymer and copolymer resins of vinyl chloride-Determination of volatile matter(including water)	IDT ISO 1269:1980
83.080.20	G31	GB/T 2915-1999	聚氯乙烯树脂水萃取物电导率的测定	Determination of conductivity of water extract of poly(vinyl chloride) resins	EQV ASTM D1755:1992
83.080.20	G31	GB/T 2916-1997	塑料--氯乙烯均聚和共聚树脂--用空气喷射筛装置的筛分析	Plastics--Vinyl chloride homopolymer and copolymer resins Sieve analysis using air-jet sieve apparatus	EQV ISO 4610:1977
83.080	G31	GB/T 2917-1982	聚氯乙烯热稳定性测试方法 刚果红法和pH法	Test methods for the thermal stability of polyvinyl chloride--Congo red method and pH method
83.040.01	G31	GB/T 2918-1998	塑料试样状态调节和试验的标准环境	Plastics--Standard atmospheres for conditioning and testing	IDT ISO 291:1997
83.060	G40	GB/T 2941-1991	橡胶试样环境调节和试验的标准温度、湿度及时间	Rubber - Standard temperatures, humidities and times for the conditioning environmental and testing of test pieces	EQV ISO 471-83
83.060	G40	GB/T 2942-1991	硫化橡胶与织物帘线粘合强度的测定 H抽出法	Rubber, vulcanized？Determination of static adhesion to textile cord - H-pull test	EQV ISO 4647-82
83.180	G38	GB/T 2943-1994	胶粘剂术语	Terms of adhesive	NEQ ISO 472-88
83.160.10	G41	GB/T 2977-1997	载重汽车轮胎系列	Series of truck tyres	NEQ TRA:1994; ETRTO:1993
83.160.10	G41	GB/T 2978-1997	轿车轮胎系列	Series of passenger car tyres	NEQ ETRTO:1994
83.160.30	G41	GB/T 2979-1999	农业轮胎系列	Series of agricultural tyres	EQV ISO 4251-1,2,4,5:1992
83.160.99	G41	GB/T 2980-2001	工程机械轮胎规格、尺寸、气压与负荷	Designation,dimensions,Inflation pressure and load for earth-mover tyres	EQV ISO 4250-1:1996
83.160.99	G41	GB/T 2981-2001	工业车辆充气轮胎技术要求	Technical specification of pneumatic tyres for industrial vehicles
83.160.99	G41	GB/T 2982-2001	工业车辆充气轮胎规格、尺寸、气压与负荷	Designation,dimensions,inflation pressure and load capacity of pneumatic tyres for industrial vehicles	NEQ ISO 3739-1:1992
83.160.10	G41	GB/T 2983-1997	摩托车轮胎系列	Series of motorcycle tyres	EQV ISO 4249-1:1985
ICS 国際規格分類	中国標準分類	規格番号	規格名称(中国語)	規格名称(英語)	国際整合
83.120	Q23	GB/T 3139-1982	玻璃钢导热系数试验方法	Test method for thermal conductivity of glassfiber reinforced plastics
83.120	Q23	GB/T 3140-1995	纤维��强塑料平均比热容试验方法	Test method for mean specific heat capacity of fiber reinforced plastics
83.120	Q23	GB/T 3355-1982	纤维��强塑料纵横剪切试验方法	Test method for longitudinal transverse shear(L-T shear) properties of fiber reinforced plastics
83.160.30	G41	GB/T 3372-2000	拖拉机和农业、林业机械用轮辋系列	Rims series for tractors,agricultural and forestry machines	EQV ISO 4251-3:1994
83.080	G16	GB/T 3398-1982	塑料球压痕硬度试验方法	Test for hardness of plastics by the ball indentation
83.080	G16	GB/T 3399-1982	塑料导热系数试验方法 护热平板法	Test method for thermal conductivity of plastics by means of the guarded hot plate
83.080	G32	GB/T 3400-1993	通用型聚氯乙烯树脂在室温下�搗Y剂吸收量的测定	Determination of plasticizer absorption for polyvinyl chloride resins of general use at room temperature	NEQ ISO 4608-84
83.080.20	G31	GB/T 3401-1999	聚氯乙烯树脂稀溶液粘数的测定	Determination of viscosity number of PVC resins in dilute solution	EQV ISO 1628-2:1988
83.080	G32	GB/T 3402-1994	氯乙烯均聚物和共聚物树脂命名	Designation of homopolymer and copolymer resins of vinyl chloride	NEQ ISO 1060-1-82
83.080	G16	GB/T 3403-1982	氨基模塑料命名	The designation of aminoplastic moulding compounds
83.040.10	G40	GB/T 3510-1992	生胶和混炼胶的塑性测定 快速塑性计法	Rubber, unvulcanized--Determination of plasticity-Rapid plastimeter method	EQV ISO 2007-91
83.060	G40	GB/T 3511-2001	硫化橡胶或热塑性橡胶 直接自然气候老化试验方法	Rubber,vulcanized and thermoplastic the test method of resistance to direct natural weathering	NEQ ISO 4665:1998
83.060	G40	GB/T 3512-2001	硫化橡胶或热塑性橡胶 热空气加速老化和耐热试验	Rubber,vulcanized or thermoplastic--Accelerated ageing and heat resistance tests-Air-oven method	EQV ISO 188:1998
83.140.01	G40	GB/T 3513-2001	硫化橡胶与单根钢丝粘合力的测定 抽出法	Rubber,vulcanized--Determination of adhesion to single-Pull out test	EQV ASTM D 1871:1988
83.060	G40	GB/T 3514-1992	硫化橡胶中游离硫含量的测定 亚硫酸钠法	Rubber, vulcanized--Determination of free sulphur content--Sodium sulphite method	NEQ ISO 7269-1987
83.060	G40	GB/T 3515-1983	硫化橡胶中炭�K含量的测定--热解法	Rubber,vulcanized--determination of carbon black content--pyrolytic method
83.060	G40	GB/T 3516-1994	橡胶中溶剂抽出物的测定	Rubber--Determination of solvent extract	NEQ ISO/DIS 1407-88
83.040.10	G40	GB/T 3517-1992	天然生胶塑性保持率的测定	Rubber, raw natural--Determination of plasticity retention index	NEQ ISO 2930-81
83.140	G43	GB/T 3672-1992	模压、压出和压延实心橡胶制品的尺寸公差	Dimensional tolerances for moulded, extruded and calendered solid rubber products	NEQ ISO 3302-88
83.080.01	G31	GB/T 3681-2000	塑料大气暴露试验方法	Plastics--Test method of exposure to weathering	NEQ ISO 877:1994
83.080.20	G31	GB/T 3682-2000	热塑性塑料熔体质量流动速率和熔体体积流动速率的测定	Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics	IDT ISO 1133:1997
83.140.01	G42	GB/T 3686-1998	V带拉伸强度和伸长率试验方法	V-btlts--Tensile strength and elongation test method	EQV JIS K 6323-1995
83.140.01	G42	GB/T 3688-1998	V带线绳粘合强度试验方法	V-belt--Cord adhesion test method	EQV �ｺ国贝斯托夫技术要求
83.040.20	G49	GB/T 3777-1996	橡胶用炭�K标准分类命名系统	Standard classification system for carbon blacks used in rubber products	EQV ASTM D 1765-1994
83.040.20	G49	GB 3778-1994	橡胶用炭�K	Carbon black for use in rubber industry	NEQ ASTM D1765-91
83.040.20	G49	GB/T 3780.1-1998	橡胶用炭�K吸碘值试验方法	Carbon black used in rubber products--Test method for iodine adsorption number	EQV ASTM D 1510-96
83.040.20	G49	GB/T 3780.2-1994	炭�K邻苯二甲酸二丁酯吸收值的测定	Carbon black--Determination of dibutylphthalate absorption number	EQV ISO 4656-1-85
83.040.20	G49	GB/T 3780.4-1994	炭�K(压缩试样)邻苯二甲酸二丁酯吸收值测定方法和试样制备	Carbon black--Preparation of sample and determination of dibutylphthalate absorption number(compressed sample)	EQV ISO 6894-84
83.040.20	G49	GB/T 3780.5-1991	橡胶用炭�K比表面积测定 CTAB法	Carbon black used in rubber products--Determination of specific surface area - CTAB test method	EQV ASTM D3765-85
83.040.20	G49	GB/T 3780.6-1998	橡胶用炭�K着色强度试验方法	Carbon black used in rubber products--Tinting strength test method	EQV ASTM D 3265-96
83.040.20	G49	GB/T 3780.7-1996	炭�KpH值的测定	Carbon black--Determination of pH value	EQV ASTM D 1512-1993
83.040.20	G49	GB/T 3780.8-1992	炭�K加热减量的测定	Carbon black - Determination of loss on heating	EQV ISO 1126-85
83.040.20	G49	GB/T 3780.10-1992	炭�K灰分的测定	Carbon black - Determination of ash content	NEQ ISO 1125-74
83.040.20	G49	GB/T 3780.11-1995	炭�K筛余物的测定	Carbon black--Determination of sieve residue
83.040.20	G49	GB/T 3780.12-1995	炭�K杂质的检查	Carbon black--Inspection of impurity material
83.040.20	G49	GB/T 3780.13-1983	炭�K (粒状) 倾注密度的测定	Carbon black (pelletized)--Determination of pour density	NEQ ISO 1306-81
83.040.20	G49	GB/T 3780.14-1995	炭�K硫含量的测定	Carbon black--Determination of sulphur content	EQV ISO 1138-81
83.040.20	G49	GB/T 3780.15-1997	橡胶用炭�K甲苯抽出物透光率的测定 快速法	Carbon black for use in the rubber industry--Determination of light transmittance of toluene extract--Rapid method	IDT ISO 3858-1:1990
83.040.20	G49	GB/T 3780.16-1983	炭�K单个粒子压碎强度的测定	Carbon black--Determination of individual pellet crush strength
83.040.20	G49	GB/T 3780.17-1995	炭�K粒径的间接测定 反射率法	Carbon black--Indirect determination of particle size--Reflectance method
83.040.20	G49	GB/T 3780.18-1998	炭�K在天然橡胶中配方及鉴定方法	Carbon black in natural rubber--Recipe and evaluation method	EQV ASTM D 3192-96
83.040.20	G49	GB/T 3780.20-1997	橡胶用炭�K甲苯抽出物透光率的测定 产品鉴定方法	Carbon black for use in the rubber industry--Determination of light transmittance of toluene extract--Method for product evaluation	IDT ISO 3858-2:1990
83.040.20	G49	GB/T 3780.21-1991	橡胶用炭�K筛余物测定 水冲洗法	Carbon black used in rubber products--Determination of sieve residue--Water washing method	EQV ASTM D1514-88
83.040.20	G49	GB/T 3781.4-1993	乙炔炭�KpH值的测定	Acetylene black--Determination of pH value	EQV JIS K 1469-84(89)
83.040.20	G49	GB/T 3781.5-1993	乙炔炭�K粗粒分的测定	Acetylene black--Determination of grit content	NEQ ISO 1437-85
83.040.20	G49	GB/T 3781.6-1993	乙炔炭�K视比容的测定	Acetylene black--Determination of apparent specific volume	EQV JIS K 1469-84(89)
83.040.20	G49	GB/T 3781.7-1993	乙炔炭�K吸碘值的测定	Acetylene black--Determination of iodine absorption number	NEQ ISO 1304-85
83.040.20	G49	GB/T 3781.8-1993	乙炔炭�K盐酸吸液量的测定	Acetylene black--Determination of hydrochloric acid absorption number
83.040.20	G49	GB/T 3781.9-1993	乙炔炭�K电阻率的测定	Acetylene black--Determination of resistivity
83.040.20	G49	GB/T 3782-1993	乙炔炭�K技术条件	Acetylene black--Specification limits	NEQ JIS K 1469-84(89)
83.140	G33	GB/T 3830-1994	软聚氯乙烯压延薄膜和片材	Calendered film(sheet)from flexible PVC	NEQ ASTM D1593-89
83.120	Q23	GB/T 3854-1983	纤维��强塑料巴氏 (巴柯尔) 硬度试验方法	Test method for hardness of fiber reinforced plastics by means of a Barcol impressor
83.120	Q23	GB/T 3855-1983	碳纤维��强塑料树脂含量试验方法	Test method for resin content of carbon fiber reinforced plastics
83.120	Q23	GB/T 3856-1983	单向纤维��强塑料平板压缩性能试验方法	Test method for compression properties of unidirectional fiber reinforced plastics
83.120	Q23	GB/T 3857-1987	玻璃纤维��强热固性塑料耐化学药品性能试验方法	Test method for chemical resistance of glass fiber reinforced thermosetting plastics
83.160	G41	GB/T 3900-1997	轮胎气门嘴系列	Tyre valve series
83.080	G31	GB/T 3960-1983	塑料滑动摩擦磨损试验方法	Test method for friction and wear of plastics by sliding
83.120; 91.	Q10	GB/T 3961-1993	纤维��强塑料术语	Terms for fiber reinforced plastics
ICS 国際規格分類	中国標準分類	規格番号	規格名称(中国語)	規格名称(英語)	国際整合
83.140	Q22	GB/T 4085-1983	半硬质聚氯乙烯块状塑料地板	Semirigid PVC plastics floor tiles
83.140.20	G33	GB/T 4454-1996	硬质聚氯乙烯层压板材	Rigid polyvinyl chloride laminated plates	NEQ JIS K 6745-1995
83.140	Y28	GB 4455-1994	农业用聚乙烯吹塑薄膜	Polyethylene blown film for agriculture	NEQ JIS K6781-86
83.140	Y28	GB/T 4456-1996	包装用聚乙烯吹塑薄膜	Polyethylene blown film for packaging	NEQ JIS Z 1702-1986
83.060	G40	GB/T 4497-1984	硫化橡胶全硫含量的测定 氧瓶燃烧法	Vulcanized rubber--Determination of total sulphur content--Oxygen combustion flask method
83.040.10	G40	GB/T 4498-1997	橡胶 灰分的测定	Rubber--Determination of ash	EQV ISO 247:1990
83.060	G40	GB/T 4499-1997	硫化橡胶中防老化剂的测定 薄层色谱法	Vulcanized rubber--Determination of antidegradant content-Thin layer chromatographic method	NEQ ISO 4645:1984
83.060	G40	GB/T 4500-1984	硫化橡胶中锌含量的测定 火焰原子吸收光谱法	Vulcanized rubber--Determination of zinc content--Flame atomic absorption spectrometric method
83.160.10	G41	GB/T 4501-1998	戴重汽车轮胎耐久性试验方法 转鼓法	Endurance test for truck and bus tyres Drum method	EQV ISO 10454-1993
83.160.10	G41	GB/T 4502-1998	轿车轮胎耐久性试验方法 转鼓法	Endurance test for passenger car tyres Drum method	EQV ISO 10191-1993
83.160.01	G41	GB/T 4503-1996	轿车轮胎强度试验方法	Strength test method for passenger car tyres	EQV ISO 10191-93
83.160.10	G41	GB/T 4504-1998	轿车无内胎轮胎脱圈阻力试验方法	Bead unseating resistance test for tubeless passenger car tyres	EQV ISO 10191-1993
83.140	Q23	GB/T 4550-1984	试验用单向纤维��强塑料平板的制备	Preparation of unidirectional orientated fiber reinforced plastic plates for test purposes
83.080	G31	GB/T 4608-1984	部分结晶聚合物熔点试验方法 光学法	Test for melting point of semicrystalline polymers--Optical method
83.080	G31	GB/T 4610-1984	塑料燃烧性能试验方法 点着温度的测定	Test for flammability of plastics--Ignition temperature test
83.080	G32	GB/T 4611-1993	通用型聚氯乙烯树脂"鱼眼"测试方法	Determination method of "fish eyes" for polyvinyl chloride resins of general use	NEQ GOCT 14332-78(87)
83.080	G32	GB/T 4612-1984	环氧化合物环氧当量的测定	Epoxide compounds--Determination of epoxide equivalent	EQV ISO 3001-78
83.080	G32	GB/T 4613-1984	环氧树脂和缩水甘油酯无机氯的测定	Epoxide resins and glycidyl esters--Determination of inorganic chlorine	EQV ISO 4573-78
83.080	G32	GB/T 4614-1984	用气相色谱法测定聚苯乙烯中残留的苯乙烯单体	Determination of residual styrene monomer in polystyrene by gas chromatography	NEQ ISO 2561-74
83.080	G32	GB/T 4615-1984	聚氯乙烯树脂中残留氯乙烯单体含量测定方法	Determination method of residual vinyl chloride monomer contents in polyvinyl chloride
83.080.10	G32	GB/T 4616-1984	酚醛模塑料丙酮可溶物 (未模塑态材料的表观树脂含量) 的测定	Phenolic moulding materials--Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state)	EQV ISO 308-81
83.080.10	G32	GB/T 4617-1984	酚醛模塑制品丙酮可溶物的测定	Phenolic mouldings--Determination of acetone-soluble matter	EQV ISO 59-76
83.080	G32	GB/T 4618-1984	环氧树脂和有关材料易�p化氯的测定	Epoxide resins and related materials--Determination of easily saponifiable chlorine	EQV ISO 4583-78
83.080	G31	GB/T 4726-1984	树脂浇铸体扭转试验方法	Standard method of torsion test for resin cast
83.140	C53	GB 4803-1994	食品容器、包装材料用聚氯乙烯树脂卫生标准	Hygienic standard for polyvinyl chloride resin used as food container and packaging material
83.180; 29.	G38	GB/T 4850-1984	压敏胶粘带低速解卷强度测试方法	Test method for unwinding force of pressure sensitive adhesive tapes at low speed
83.180	G38	GB/T 4851-1998	压敏胶粘带持粘性试验方法	Test method for holding power of pressure sensitive adhesive tapes	EQV JIS E 0237-1991
83.180; 29.	G38	GB/T 4852-1984	压敏胶粘带初粘性测试方法 (斜面滚球法)	Test method for tack of pressure sensitive adhesive tapes (method of oblique plane by rolling boll)
83.120	Q10	GB/T 4944-1996	玻璃纤维��强塑料层合板层间拉伸强度试验方法	Test method for interlaminar tensile strength of glass fiber reinforced plastic laminates
83.120	Q23	GB/T 5258-1995	纤维��强塑料薄层板压缩性能试验方法	Test method for compressive properties of fiber reinforced plastic thin laminates
83.120	Q23	GB/T 5349-1985	纤维��强热固性塑料管轴向拉伸性能试验方法	Test method for longitudinal tensile properties of fiber-reinforced thermosetting plastic pipe
83.120	Q23	GB/T 5350-1985	纤维��强热固性塑料管轴向压缩性能试验方法	Test method for longitudinal compressive properties of fiber-reinforced thermosetting plastic pipe
83.120	Q23	GB/T 5351-1985	纤维��强热固性塑料管短时水压失效压力试验方法	Test method for short-time hydraulic failure pressure of fiber-reinforced thermosetting plastic pipe	NEQ ASTM D1599-81
83.120	Q23	GB/T 5352-1985	纤维��强热固性塑料管平行板外载性能试验方法	Test method for external loading properties of fiber -reinforced thermosetting plastic pipe by parallel- plate loading	EQV ASTM D2412-77
83.080	G31	GB/T 5470-1985	塑料冲击脆化温度试验方法	Test method for brittleness temperature of plastics by impact
83.080.10	G31	GB/T 5471-1985	热固性模塑料压塑试样制备方法	Preparation method for compression moulding of specimens of thermosetting moulding materials	EQV ISO 295-74
83.080.10	G31	GB/T 5472-1985	热固性模塑料矩道流动固化性试验方法	Test method for rectangular flow cure properties of thermosetting moulding compounds
83.080.10	G31	GB/T 5473-1985	酚醛模塑制品游离氨的检定	Phenol-formaldehyde mouldings--Detection of free ammonia	EQV ISO 172-78
83.080.10	G31	GB/T 5474-1985	酚醛模塑制品游离氨和铵化合物的测定 比色法	Phenol-formaldehyde mouldings--Determination of free ammonia and ammonium compounds--Colorimetric comparison method	EQV ISO 120-77
83.080	G31	GB/T 5475-1985	离子交换树脂取样方法	Methods for sampling ion exchange resins
83.080.10	G31	GB/T 5476-1996	离子交换树脂预处理方法	Methods for pretreating ion exchange resins
83.080	G31	GB/T 5478-1985	塑料滚动磨损试验方法	Test method for wear of plastics by rolling	NEQ JIS K7204-80
83.080	G31	GB/T 5479-1985	塑料对应术语	Equivalent terms for plastics	EQV ISO 194-81
83.140	G42	GB/T 5574-1994	工业用橡胶板	Industrial rubber sheet	NEQ NF T47-402-80
83.040.10	G34	GB/T 5576-1997	橡胶和胶乳 命名法	Rubbers and latices--Nomenclature	IDT ISO 1629:1995
83.060	G34	GB 5577-1985	合成橡胶牌号规定	Codification of types for synthetic rubbers
83.060	G40	GB/T 5723-1993	硫化橡胶或热塑性橡胶 试验用试样和制品尺寸的测定	Rubber, vulcanized or thermoplastic--Determination of dimensions of test pieces and products for test purposes	EQV ISO 4648-91
83.140.01	G42	GB/T 5755-2000	钢丝绳芯输送带钢丝绳粘合强度的测定	Steel cord conveyor belts-cord-to-coating bond test	EQV ISO 7623:1996
83.080	G32	GB/T 5757-1986	离子交换树脂含水量测定方法	Determination for water retention capacity of ion exchange resins
83.080	G32	GB/T 5758-2001	离子交换树脂粒度、有效粒径和均一系数的测定	Determination for particle size range,effective size and uniformity coefficient of ion exchange resins
83.080	G31	GB/T 5759-2000	氢氧型阴离子交换树脂含水量测定方法	Determination for water retention capacity of anion exchange resins in hydroxylic form
83.080	G31	GB/T 5760-2000	氢氧型阴离子交换树脂交换容量测定方法	Determination for exchange capacity of anion exchange resins in hydroxylic form
83.080	G32	GB/T 5761-1993	悬浮法通用型聚氯乙烯树脂	Suspension polyvinyl chloride resins of general purpose	NEQ GOCT 14332-78(87)
ICS 国際規格分類	中国標準分類	規格番号	規格名称(中国語)	規格名称(英語)	国際整合
83.120	Q23	GB/T 6011-1985	纤维��强塑料燃烧性能试验方法 炽热棒法	Test method for flammability characteristics of fiber-reinforced plastics--Incandescent rod method
83.060	G40	GB/T 6029-1996	硫化橡胶中促进剂的检定 薄层色谱法	Vulcanized rubber-Determination of accelerant-Thin layer chromatographic method	NEQ ISO/DIS 10398-1995
83.060	G40	GB/T 6030-1985	硫化橡胶中炭�K分散度的测定 显微照相法	Vulcanized rubber--Determination of carbon black dispersion--Micrographic method	NEQ ASTM D2663-82
83.060	G40	GB/T 6031-1998	硫化橡胶或热塑性橡胶硬度的测定(10~100IRHD)	Rubber,Vulcanized or thermoplastic--Determination of hardness (hardness between 10 IRHD and 100IRHD)	IDT ISO 48:1994
83.060	G40	GB/T 6034-1985	硫化橡胶压缩耐寒系数的测定	Vulcanized rubber--Determination of coefficient of cold-resistance under compression	NEQ ΓOCT 13808-79
83.060	G40	GB/T 6035-1985	硫化橡胶拉伸耐寒系数的测定	Vulcanized rubber--Determination of coefficient of low temperature resistance at extention	NEQ ΓOCT 408-78
83.060	G40	GB/T 6036-2001	硫化橡胶或热塑性橡胶 低温刚性的测定(吉门试验)	Rubber,vulcanized or thermoplastic--Determination of low temperature stiffening(Gehman test)	IDT ISO 1432:1988
83.060	G40	GB/T 6037-1985	硫化橡胶高温拉伸强度和扯断伸长率的测定	Vulcanized rubber--Determination of tensile strength and ultimate elongation at high temperatures
83.060	G40	GB/T 6038-1993	橡胶试验胶料的配料、混炼和硫化设备及操作程序	Rubber test mixes--Preparation, mixing and vulcanization--Equipment and procedures	NEQ ISO/DIS 2393-89
83.060	G40	GB/T 6039-1997	橡胶物理试验和化学试验术语	Rubber physical tests and chemical tests--Terms	EQV ISO 1382:1996
83.160	G40	GB/T 6326-1994	轮胎术语	Tyre terms	NEQ ISO 3877/1-78
83.160.01	G41	GB/T 6327-1996	载重汽车轮胎强度试验放方法	Strength test method for truck and bus tyres	EQV JIS D 4230-86
83.180	G38	GB/T 6328-1999	胶粘剂剪切冲击强度试验方法	Adhesives-Test method for shear impact strength of adhesive bonds	IDT ISO 9653:1991
83.180	G38	GB/T 6329-1996	胶粘剂对接接头拉伸强度的测定	Adhesives--Determination of tensile strength of butt joints	EQV ISO 6922-1987
83.100	G31	GB/T 6342-1996	泡沫塑料与橡胶 线性尺寸的测定	Cellular plastics and rubbers--Determination of linear dimensions	IDT ISO 1923-1981(E)
83.100	G31	GB/T 6343-1995	泡沫塑料和橡胶 表观(体积)密度的测定	Cellular plastics and rubbers--Determination of apparent (bulk) density	NEQ ISO 845-1988
83.100	G31	GB/T 6344-1996	软质泡沫聚合物材料 拉伸强度和断裂伸长率的测定	Polymeric materlals, cellular flexible--Determination of tensile strength and elongation at break	IDT ISO 1798-1983
83.080.20	G31	GB/T 6594.1-1998	聚苯乙烯(PS)模塑和挤出材料 第1部分: 命名系统和分类基础	Polystyrene (PS) moulding and extrusion materials Part 1: Designation system and basis for specifications	EQV ISO 1622-1-1994
83.080.20	G31	GB/T 6595-1986	聚丙烯树脂"鱼眼"测试方法	Test method for fish eye count of polypropylene resin	NEQ ASTM D3351-74
83.080.20	G32	GB/T 6598-1986	小角激光光散射法测定聚苯乙烯标准样品的重均分子量	Determination of weight-average molecular weight of polystyrene standards by low angle laser light scattering method
83.080.20	G32	GB/T 6599-1986	体积排斥色谱法测定聚苯乙烯标准样品的平均分子量及分子量分布	Determination of molecular weight averages and molecular weight distribution of polystyrene standards by steric exclusion chromatography
83.140	G33	GB/T 6668-1994	聚氯乙烯针织布基发泡人造革	Coated knitted fabrics from expanded PVC
83.100	G31	GB/T 6669-2001	软质泡沫聚合材料 压缩永久变形的测定	Polymeric material cellular flexible Determination of compression set	IDT ISO 1856:1980
83.100	G31	GB/T 6670-1997	软质聚氨酯泡沫塑料回弹性能的测定	Cellular plastics--Flexible polyurethane foam-Determination of resilience	NEQ ASTM D3574-1981
83.140.10	G31	GB/T 6672-2001	塑料薄膜和薄片厚度测定 机械测量法	Plastics film and sheeting Determination of thickness by mechanical scanning	IDT ISO 4593:1993
83.140.10	G31	GB/T 6673-2001	塑料薄膜和薄片长度和宽度的测定	Plastics film and sheeting determination of length and width	IDT ISO 4592-1992
83.040.10	G40	GB/T 6737-1997	生橡胶 挥发分含量的测定	Rubber,raw--Determination of volatile-matter Content	EQV ISO 248:1991
ICS 国際規格分類	中国標準分類	規格番号	規格名称(中国語)	規格名称(英語)	国際整合
83.160.10	G41	GB/T 7034-1998	轿车轮胎高速性能试验方法 转鼓法	High speed test for passenger car tyres Drum method	EQV ISO 10191-1993
83.160.10	G41	GB/T 7035-1993	轻型载重汽车轮胎高速性能试验方法 转鼓法	High speed performance test for light truck tyres Drum method	NEQ DOT安全标准
83.160.10	G41	GB 7036.1-1997	充气轮胎内胎 第1部分: 汽车轮胎内胎	Inner tube of pneumatic tyres Part 1: Inner tube of automobile tyres	EQV JIS D4231:1987
83.160.10	G41	GB 7036.2-1997	充气轮胎内胎 第2部分: 摩托车轮胎内胎	Inner tube of pneumatic tyres--Part 2: Inner tube of motorcycle tyres	EQV JIS K6367:1987
83.160.10	G41	GB 7037-1992	翻新和修补轮胎(斜交)	Retreading and repair of tyres (Diagonal)
83.060	G34	GB/T 7042-1986	橡胶压缩或剪切性能的测定 (扬子尼机械示波器)	Rubber properties determination in compression or shear (Yerzley mechanical oscillograph)	EQV ASTM D745-79
83.060	G34	GB/T 7043-1986	硫化橡胶中金属含量的测定 火焰原子吸收光谱法 第二部分: 铜含量的测定	Vulcanized rubber--Determination of metal content--Flame atomic absorption spectrometric method--Part 2: Determination of copper content	NEQ ISO 6101/3-87
83.060	G40	GB/T 7043.1-2001	橡胶中铜含量的测定 原子吸收光谱法	Rubber--Determination of copper content by atomic absorption spectrometry	EQV ISO 6101-3:1997
83.060	G40	GB/T 7043.2-2001	橡胶中铜含量的测定 二乙基二硫代氨基甲酸锌光度法	Rubber--Determination of copper content--Zinc diethyldithiocarbamate photometric method	EQV ISO 8053:1995
83.040.20	G49	GB/T 7044-1993	色素炭�K技术条件	Colour black--Specification	NEQ ASTM D 561-82
83.040.20	G49	GB/T 7045-1993	色素炭�KpH值的测定	Colour black--Determination of pH value	NEQ ASTM D 1512-90
83.040.20	G49	GB/T 7046-1995	色素炭�K邻苯二甲酸二丁酯吸收值的测定	Colour carbon black--Determination of dibutyl phthalate absorption number
83.040.20	G49	GB/T 7047-1993	色素炭�K挥发分含量的测定	Colour black--Determination of volatile content
83.040.20	G49	GB/T 7048-1993	色素炭�K�K度的测定	Colour black--Determination of blackness
83.040.20	G49	GB/T 7050-1993	色素炭�K着色力的测定	Colour black--Determination of tinting strength	NEQ ASTM D 3265-88
83.040.20	G49	GB/T 7052-1995	色素炭�K流动度的测定	Colour carbon black--Determination of flow characteristic
83.180	G38	GB/T 7122-1996	高强度胶粘剂剥离强度的测定 浮辊法	Adhesives--Determination of peel resistance of high-strength adhesive bonds--Floating roller method	EQV ISO 4578-1990
83.180	G38	GB/T 7123-1986	胶粘剂适用期的测定方法	Test method for pot life of adhesives	NEQ BS 5350
83.180	G38	GB/T 7124-1986	胶粘剂拉伸剪切强度测定方法 (金属对金属)	The method for determination of strength properties of adhesive in shear by tension loading(Metal to metal)	EQV ISO 4587-79
83.180	G38	GB/T 7125-1999	压敏胶粘带和胶粘剂带厚度试验方法	Test method for thickness of pressure-sensitive and gummed tapes	NEQ ASTM D3652M:1993
83.140	G31	GB/T 7130-1986	酚醛模塑制品中游离酚的测定 碘量法	Determination of free phenols in phenol-formaldehyde mouldings--Iodometric method	EQV ISO 119-77
83.140	G32	GB/T 7134-1996	浇铸型工业有机玻璃板材、棒材和管材	Poly (methyl methacrylate) cast sheets, rods and tubes	NEQ ISO 7823-1-1987
83.080	G31	GB/T 7139-1986	氯乙烯均聚物和共聚物中氯的测定	Determination of chlorine in rinyl chloride homopolymers and copolymers	EQV ISO 1158-84
83.080	G31	GB/T 7141-1992	塑料热空气暴露试验方法	Plastics--Methods of exposure to thermal air	NEQ JIS K7212-1977
83.080	G31	GB/T 7142-1986	塑料长期受热作用后的时间-温度极限的测定	Determination of time-temperature limits of plastics after exposure to prolonged action of heat	EQV ISO 2578-74
83.120	Q23	GB/T 7190.1-1997	玻璃纤维��强塑料冷却塔 第1部分：中小型玻璃纤维��强塑料冷却塔	Glass fiber reinforced plastic cooling tower--Part 1: Middle and small glass fiber reinforced plastic cooling tower
83.120	Q23	GB/T 7190.2-1997	玻璃纤维��强塑料冷却塔 第2部分：大型玻璃纤维��强塑料冷却塔	Glass fiber reinforced plastic cooling tower--Part 2: Large glass fiber reinforced plastic cooling towers
83.080	G32	GB/T 7193.1-1987	不饱和聚酯树脂 粘度测定方法	Unsaturated polyester resin--Determination of viscosity	NEQ ISO 2555-74
83.080	G32	GB/T 7193.2-1987	不饱和聚酯树脂 羟值测定方法	Unsaturated polyester resin--Determination of hydroxyl value	EQV ISO 2554-74
83.080	G32	GB/T 7193.3-1987	不饱和聚酯树脂 固体含量测定方法	Unsaturated polyester resin--Determination of solid content	NEQ NF 751-515-79
83.080	G32	GB/T 7193.4-1987	不饱和聚酯树脂 80℃下反应活性测定方法	Unsaturated polyester resin--Determination of reactivity at 80℃	EQV ISO 584-82
83.080	G32	GB/T 7193.5-1987	不饱和聚酯树脂 80℃热稳定性测定方法	Unsaturated polyester resin--Determination of heat stability at 80℃
83.080	G32	GB/T 7193.6-1987	不饱和聚酯树脂 25℃凝胶时间测定方法	Unsaturated polyester resin--Determination of gel time at 25℃	NEQ ISO 2535-74
83.080	G32	GB/T 7193.7-1992	液态不饱和聚酯树脂颜色试验方法	Test method for colour of liquid unsaturated polyester resin	NEQ ISO 6271-81
83.080	G32	GB/T 7194-1987	不饱和聚酯树脂浇铸体耐碱性测定方法	Unsaturated polyester resin--Determination of stability of casting resin in basic solution	NEQ ISO 175-81
83.060	G34	GB/T 7359-1999	合成橡胶术语	Synthetic rubbers terminology	EQV ISO 1382:1996
83.160.10	G41	GB/T 7377-1997	力车轮胎系列	Series of cycle tyres	NEQ ISO 5775-1:1994
83.140	G42	GB/T 7530-1998	橡胶或塑料涂覆织物 术语	Rubber-or plastics-coated fabrics-Glossary of terms	NEQ ISO 1382:1996
83.040	G40	GB/T 7535-1996	硫化橡胶分类 分类系统说明	Rubber, vulcarized--Classification--Description of the classification system	EQV ISO 4632/1-1982
83.180	G38	GB/T 7749-1987	胶粘剂劈裂强度试验方法 (金属对金属)	Test method of cleavage strength of adhesive (metal to metal)
83.180	G38	GB/T 7750-1987	胶粘剂拉伸剪切蠕变性能试验方法 (金属对金属)	Test method of creep properties of adhesive in shear by tension loading (metal to metal)
83.180	G38	GB/T 7751-1987	胶粘剂贮存期的测定方法	Test method for storage life of adhesives	EQV ASTM D1337-84
83.060	G40	GB/T 7755-1987	硫化橡胶透气性的测定 恒容法	Rubber, vulcanized--Determination of permeability to gases--Constant volume method	EQV ISO 1399-82
83.060	G40	GB/T 7756-1987	硫化橡胶透气性的测定 恒压法	Rubber, vulcanized--Determination of permeability to gases--Constant pressure method	EQV ISO 2782-77
83.060	G40	GB/T 7757-1993	硫化橡胶或热塑性橡胶压缩应力应变性能的测定	Rubber,vulcanized or thermoplastic--Determination of compression stress-strain properties	EQV ISO 7743-89
83.060	G40	GB/T 7758-1987	硫化橡胶低温特性的测定 温度回缩法 (TR试验)	Rubber, vulcanized--Determination of low temperature characteristics--Temperature-retraction procedure(TR test)	EQV ISO 2921-82
83.060	G40	GB/T 7759-1996	硫化橡胶、热塑性橡胶 常温、高温和低温下压缩永久变形测定	Rubber, Vulcanized or thermoplastic Determination of compression set at ambient elevated or low temperatures	EQV ISO 815-1991
83.060	G40	GB/T 7760-1987	硫化橡胶与金属粘合的测定 单板法	Rubber, vlcanized--Determination of adhesion to metal--One-plate method	EQV ISO 813-74
83.060	G40	GB/T 7761-1987	橡胶与刚性材料粘合强度的测定 圆锥形件法	Rubber--Determination of adhesion to rigid materials using conical shaped parts	EQV ISO 5600-79
83.060	G40	GB/T 7762-1987	硫化橡胶耐臭氧老化试验 静态拉伸试验法	Rubber, vulcanized--Resistance to ozone ageing--Static strain test method	NEQ ISO 1431/1-80
83.060	G40	GB/T 7763-1987	硫化橡胶溶胀指数测定方法	Rubber, vulcanized--Determination method of swelling index
83.060	G40	GB/T 7764-2001	橡胶鉴定 红外光谱法	Rubber--Indentification-lnfra-red spectrometric method	EQV ISO 4650:1984
83.060	G40	GB/T 7766-2000	橡胶中炭�K含量的测定 硝酸消化法	Rubber--Determination of carbon black content--Nitric acid digestion method	NEQ ASTM D 297:1993
83.040.20	G40	GB/T 7767-1994	炭�K术语	Standard terminology relating to carbonblack	NEQ ASTM D3053-92
ICS 国際規格分類	中国標準分類	規格番号	規格名称(中国語)	規格名称(英語)	国際整合
83.040.10	B72	GB/T 8081-1999	天然生胶 标准橡胶规格	Raw natural rubber--Standard rubber--Specifications	EQV ISO 2000:1989
83.040.10	B72	GB/T 8082-1999	天然生胶 标准橡胶 包装、标志、贮存和运输	Raw natural rubber--Standard rubber--Packing,marks,storage and transportion
83.040.10	B72	GB/T 8083-1987	天然生胶 标准橡胶取样	Raw natural rubber--Standard rubber--Sampling	NEQ ISO 1795-74
83.040.10	B72	GB/T 8084-1987	天然生胶 样品的制备	Raw natural rubber--Sample preparation
83.040.10	B72	GB/T 8086-1987	天然生胶 杂质含量测定法	Raw natural rubber--Determination of dirt	NEQ ISO 249-74
83.040.10	B72	GB/T 8087-1987	天然生胶 挥发物含量测定法	Raw natural rubber--Determination of volatile matter content	NEQ ISO 248-79
83.040.10	B72	GB/T 8088-1999	天然生胶和天然胶乳 氮含量的测定	Rubber,raw natural and rubber latex,natural--Determination of nitrogen content	EQV ISO 1656:1996
83.040.10	B72	GB/T 8089-1987	天然生胶 烟胶片	Raw natural rubber--Smoked sheets
83.040.10	B72	GB/T 8090-1987	天然生胶 白绉胶片和浅色绉胶片	Raw natural rubber--White crepes and pale crepes
83.080.20	G32	GB/T 8144-1987	阳离子交换树脂交换容量测定方法	Determination for exchange capacity of cation exchange resins
83.120	G32	GB/T 8237-1987	玻璃纤维��强塑料(玻璃钢)用液体不饱和聚酯树脂	Liquid unsaturated polyester resin for glass fiber reinforced plastics
83.120	G32	GB/T 8238-1987	不饱和聚酯树脂液体和浇铸体折光率的测定	Unsaturated polyester resin--Determination of refractive index of liquid and casting	NEQ ISO 489-83
83.040.10	B72	GB/T 8289-2001	浓缩天然胶乳 氨保存离心或膏化胶乳 规格	Natural rubber latex concentrate--Centrifuged or Creamed, ammonia-preserved types--Specification	EQV ISO 2004:1997
83.040.10	B72	GB/T 8290-1987	天然浓缩胶乳 取样	Natural rubber latex concentrate--Sampling	NEQ ISO 123-85
83.040.10	B72	GB/T 8291-1987	天然浓缩胶乳 凝块含量的测定	Natural rubber latex concentrate--Determination of coagulum content	NEQ ISO 706-85
83.040.10	B72	GB/T 8292-2001	浓缩天然胶乳 挥发脂肪酸值的测定	Natural rubber latex concentrate--Determination of volatile fatty acid number	IDT ISO 506:1992
83.040.10	B72	GB/T 8293-2001	浓缩天然胶乳 残渣含量的测定	Natural rubber latex concentrate--Determination of sludge content	IDT ISO 2005:1992
83.040.10	B72	GB/T 8294-2001	浓缩天然胶乳 硼酸含量的测定	Natural rubber latex concentrate--Determination of boric acid content	IDT ISO 1802:1992
83.040.10	B72	GB/T 8295-1987	天然胶乳 铜含量的测定	Natural rubber latex--Determination of copper content	NEQ ISO/R 1654-71
83.040.10	B72	GB/T 8296-1987	天然胶乳 锰含量的测定 (高碘酸钾光度测定法)	Natural rubber latex--Determination of manganese content--Potassium periodate photometric method	NEQ ISO 1655-75
83.040.10	B72	GB/T 8297-2001	浓缩天然胶乳 KOH值的测定	Natural rubber latex concentrate--Determination of KOH number	IDT ISO 127:1995
83.040.10	B72	GB/T 8298-2001	浓缩天然胶乳 总固体含量的测定	Natural rubber latex concentrate--Determination of total solids content	EQV ISO 124:1997
83.040.10	B72	GB/T 8299-2001	浓缩天然胶乳 干胶含量的测定	Natural rubber latex concentrate--Determination of dry rubber content	IDT ISO 126:1995
83.040.10	B72	GB/T 8300-2001	浓缩天然胶乳 碱度的测定	Natural rubber latex concentrate--Determination of alkalinity	IDT ISO 125:1990
83.040.10	B72	GB/T 8301-2001	浓缩天然胶乳 机械稳定度的测定	Natural rubber latex concentrate--Determination of mechanical stability	IDT ISO 35:1995
83.080.20	G31	GB/T 8324-1987	模塑料体积系数试验方法	Test method for bulk factor of moulding materials	EQV ISO 171-80
83.080.20	G31	GB/T 8325-1987	聚合物和共聚物水分散体 pH 值测定方法	Determinationd for pH of aqueous dispersions of polymers and copolymers	EQV ISO 1148-80
83.080.20	G31	GB/T 8330-1987	离子交换树脂湿真密度测定方法	Method for the determination of true density of ion exchange resins in wet state
83.080.20	G31	GB/T 8331-1987	离子交换树脂湿视密度测定方法	Method for the determination of bulk density of ion exchange resins in wet state
83.060	G35	GB 8655-1988	丁苯橡胶 (SBR) 1500	Rubber, styrene-butadiene (SBR) 1500
83.060	G34	GB/T 8656-1998	乳液和溶液聚合型苯乙烯-丁二烯橡胶(SBR)评价方法	Styrene-butadiene rubber(SBR)--Emulsion and solution-polymerized types--Evaluation procedures	IDT ISO 2322:1996
83.040.10	G34	GB/T 8657-2000	苯乙烯--丁二烯生胶 �p和有机酸含量的测定	Rubber,raw styrene-butadiene--Determination of soap and organic-acid content	EQV ISO 7781:1996
83.060	G34	GB/T 8658-1998	乳液聚合型苯乙烯-丁二烯橡胶生胶结合苯乙烯含量的测定 折光指数法	Rubber,raw styrene-butadiene,emulsion-polymerized--Determination of bound styrene content--Refractive index method	IDT ISO 2453:1991
83.060	G35	GB/T 8659-2001	丁二烯橡胶（BR）9000	Rubber,butadiene (BR) 9000	EQV JSR BR01公司标准
83.060	G34	GB/T 8660-1998	溶液聚合型 丁二烯橡胶(BR)评价方法	Rubber,butadiene(BR)--Solution-polymerized types--Evaluation procedures	IDT ISO 2476:1996
83.080.20	G31	GB/T 8661-1988	用气相色谱法测定丙烯腈-丁二烯-苯乙烯 (ABS)树脂中残留丙烯腈单体含量	Determination of residual acrylonitrile monomer content in acrylonitrile-buta-diene-styrene resin by gas chromatography	EQV ISO/DIS 4581.2-86
83.080	Y20	GB/T 8807-1988	塑料镜面光泽试验方法	Test method for specular gloss of plastics	NEQ ASTM D523-80
83.080	Y20	GB/T 8808-1988	软质复合塑料材料剥离试验方法	Test method for peel force of flexible laminated plastics	NEQ DIN 53357-82
83.140	Y20	GB/T 8809-1988	塑料薄膜抗摆锤冲击试验方法	Test method for pendulum impact resistance of plastic films	NEQ ASTM D3420-84
83.080	Y20	GB/T 8810-1988	硬质泡沫塑料吸水率试验方法	Test method for water absorption of rigid cellular plastics	EQV ISO 2896-86
83.080	Y20	GB/T 8811-1988	硬质泡沫塑料尺寸稳定性试验方法	Test method for dimensional stability of rigid cellular plastics	EQV ISO 2796-80
83.080	Y20	GB/T 8812-1988	硬质泡沫塑料弯曲试验方法	Test method for bending of rigid cellular plastics	IDT ISO 1209-76
83.080	Y20	GB/T 8813-1988	硬质泡沫塑料压缩试验方法	Test method for compression of rigid cellular plastics	IDT ISO 844-78
83.140	Y28	GB/T 8814-1998	门、窗框用硬聚氯乙烯(PVC)型材	Unplasticized polyvinyl chloride (PVC) profiles for the frames of doors and windows
83.140	Y28	GB/T 8946-1998	塑料编织袋	Plastic woven sack
83.140	Y28	GB/T 8947-1998	复合塑料编织袋	Composite plastic woven sack
ICS 国際規格分類	中国標準分類	規格番号	規格名称(中国語)	規格名称(英語)	国際整合
83.080.01	G31	GB/T 9341-2000	塑料弯曲性能试验方法	Plastics--Determination of flexural properties	IDT ISO 178:1993
83.080	G31	GB/T 9342-1988	塑料洛氏硬度试验方法	Plastics--Determination of hardness by the ball indentation method--Rockwell hardness	EQV ISO 2039/2-81
83.080	G31	GB/T 9343-1988	塑料燃烧性能试验方法 闪点和自燃点的测定	Test method for flammability of plastics--Flash-ignition temperature and self-ignition temperature test	EQV ASTM D1929-77
83.080	G31	GB/T 9345-1988	塑料灰分通用测定方法	Plastics--Determination of ash--General methods	IDT ISO 3451/1-81
83.080	G31	GB/T 9347-1988	氯乙烯-乙酸乙烯酯共聚物中乙酸乙烯酯的测定方法	Plastics--Vinyl chloride-vinyl acetate copolymers--Determination of vinyl acetate	IDT ISO 1159-78
83.080	G31	GB/T 9348-1988	聚氯乙烯树脂的杂质与外来物粒子数的测定方法	Determination of number of impurities and foreign particles of polyvinyl chloride resins	EQV ISO 1265-79
83.080	G31	GB/T 9349-1988	氯乙烯均聚物、共聚物树脂及组合物热稳定性的测定 变色法	Determination of the thermal stability of homopolymer and copolymer resins of vinyl chloride and their compounds--Discoloration method	EQV ISO 305-76
83.080	G31	GB/T 9350-1988	氯乙烯均聚物和共聚物树脂水萃取液ph值的测定	Homopolymer and copolymer resins of vinyl chloride--Determination of pH of aqueous extract	EQV ISO 1264-80
83.080	G31	GB/T 9352-1988	热塑性塑料压缩试样的制备	Plastics--Compression moulding test specimens of thermoplastic materials	NEQ ISO 293-86
83.080	G31	GB/T 9353-1988	用气相色谱法测定丙烯腈-丁二烯-苯乙烯 (ABS)树脂中残留苯乙烯单体	Determination of residual styrene monomer in Acrylonitrile-Butadiene-Styrene(ABS) resin by gas chromatography	NEQ ISO 2561-74
83.040.20	G49	GB/T 9578-1988	标准参比炭�K	Standard reference black	NEQ ASTM D1765-86
83.040.20	G49	GB/T 9579-1998	炭�K在丁苯橡胶中配方及鉴定方法	Carbon black in SBR(Styrene-butadiene rubber)-Recipe and evaluation method	EQV ASTM D 3191-96
83.040.20	G49	GB/T 9580-1988	标准参比炭�K的鉴定方法	Standard practice for carbon black--Evaluation of a standard reference black	IDT ASTM D4122-83
83.080	G32	GB/T 9638-1988	塑料燃烧烟尘的测定 称量法	Gravimetric determination of smoke particulates from combustion of plastic materials	EQV ASTM D4100-82
83.140	Y28	GB/T 9639-1988	塑料薄膜和薄片抗冲击性能试验方法 自由落镖法	Plastics--Film and sheeting--Determination of impact resistance--Free falling dart method	NEQ ISO/DIS 7765-85
83.100	Y28	GB/T 9640-1988	软质泡沫聚合材料加速老化试验方法	Polymeric materials cellular flexible--Accelerated ageing tests	IDT ISO 2440-83
83.100	Y28	GB/T 9641-1988	硬质泡沫塑料拉伸性能试验方法	Test method for tensile properties of rigid cellular plastics	EQV ISO 1926-79
83.200	G95	GB/T 9707-2000	密闭式炼胶机、炼塑机	Rubber and plastics internal mixer
83.160.10	G41	GB 9743-1997	轿车轮胎	Passenger car tyres	EQV ETRTO:1994
83.160.10	G41	GB 9744-1997	载重汽车轮胎	Truck tyres	NEQ TRA:1994
83.160.20	G41	GB 9745-1995	航空轮胎	Aircraft tyre	EQV ISO 3324/1-93
83.160.20	G41	GB/T 9746-1995	航空轮胎系列	Series of aircraft tyres
83.160.10	G41	GB/T 9749-1997	力车轮胎强度性能试验方法	Strength performance testing method for cycle tyres	IDT JIS K 6302-1994
83.160.10	G41	GB/T 9762-1997	力车轮胎耐久性能试验方法(转鼓法)	Endurance test for cycle tyres (Drum method)	EQV JIS K 6302:1994
83.160.10	G41	GB/T 9763-1997	力车轮胎脱圈水压试验方法	Unseat by water pressure testing method for cycle tyres	EQV JIS K 6302-1994
83.160.10	G41	GB 9764-1997	轮胎气门嘴芯腔	Tyre valves--Core chambers	NEQ ISO 6762:1982
83.160.10	G41	GB 9765-1997	轮胎气门嘴螺纹	Tyre valve threads	NEQ ISO 4570/:1977
83.160	G41	GB/T 9766-1994	轮胎气门嘴试验方法	Test method for tyre valve	NEQ SAE J1206-78
83.160	G41	GB/T 9767-1994	轮胎气门芯试验方法	Test method for tyre valve core	NEQ JIS D4211-82
83.160.01	G41	GB/T 9768-2000	轮胎使用与保养规程	Regulation of application and maintenance of tyres
83.040.01	G40	GB/T 9865.1-1996	硫化橡胶或热塑性橡胶样品和试样的制备 第一部分: 物理试验	Rubber, vulcanized or thermoplastic--Preparation of samples and test pieces--Part1: Physical tests	IDT ISO 4661-1-1993
83.060	G40	GB/T 9867-1988	硫化橡胶耐磨性能的测定 (旋转辊筒式磨耗机法)	Rubber--Determination of abrasion resistance using a rotating cylinderical drum device	NEQ ISO 4649-85
83.060	G40	GB/T 9868-1988	橡胶获得高于或低于常温试验温度通则	Rubber--General directions for achieving elevated or subnormal temperatures for test purposes	IDT ISO 3383-85
83.060	G40	GB/T 9869-1997	橡胶胶料硫化特性的测定(圆盘振荡硫化仪法)	Rubber--Measurement of vulcanization characteristics with the oscillating disc curemeter	IDT ISO 3417:1991
83.060	G40	GB/T 9870-1988	弹性体动态试验的一般要求	Elastomers--General requirements for dynamic testing	NEQ ISO 2856-81
83.060	G40	GB/T 9871-1988	硫化橡胶老化性能的测定 (拉伸应力松弛试验)	Rubber,vulcanized--Determination of ageing characteristics by measurement of stress at a given elongation	NEQ ISO 6914-85
83.060	G40	GB/T 9872-1998	氧瓶燃烧法测定橡胶和橡胶制品中溴和氯的含量	Rubber and rubber products-Determination of bromine and chlorine content-Oxygen flask combustion technique	IDT ISO 7725:1991
83.060	G40	GB/T 9873-1988	橡胶中铅含量的测定 双硫腙光度法	Rubber--Determination of lead content--Dithizone photometric method	NEQ DIN 53599/3-78
83.060	G40	GB/T 9874-2001	橡胶中铅含量的测定 原子吸收光谱法	Rubber--Determination of lead content by atomic absorption spectrometry	EQV ISO 6101-2:1997
83.060	G40	GB/T 9875-2001	橡胶聚合物的鉴定 化学方法	Rubber--Identification of polymers--Chemical method
83.060	G40	GB/T 9881-1988	橡胶与橡胶制品通用术语	Rubber and rubber products general-purpose terms	NEQ ISO 1382-82
83.060	G40	GB/T 9882-1988	再生橡胶术语及定义	Reclaimed rubber terms and definitions
83.140	G40	GB/T 9885-1988	食品用及医用橡胶制品术语	Terms of rubber products for foodstuff and medicine
83.140	G42	GB/T 9900-1988	抽出式难燃橡胶导风筒	Extractable ventilation rubber ducting of the fire retardant	NEQ NCB 586-71
83.120	Q23	GB/T 9979-1988	纤维��强塑料高低温力学性能试验准则	Guide rule of test for mechanical properties of fiber-reinforced plastics at elevated and reduced temperatures	NEQ ASTM D759-76
ICS 国際規格分類	中国標準分類	規格番号	規格名称(中国語)	規格名称(英語)	国際整合
83.140	Q22	GB/T 10002.2-1988	给水用硬聚氯乙烯管件	Unplasticized polyvnyl chloride (PVC-U) fitting for water supply
83.140.10	Y28	GB/T 10003-1996	普通型双向拉伸聚丙烯薄膜	Biaxially oriented polypropylene plain film	NEQ JIS K 6782-1992
83.140.10	G33	GB/T 10004-1998	耐蒸煮复合膜、袋	Laminated retort film and pouch	EQV JIS Z1707-1995
83.140.10	G33	GB/T 10005-1998	双向拉伸聚丙烯(BOPP)/低密度聚乙烯(LDPE)复合膜、袋	Biaxially oriented polypropylene laminated polyethylene(BOPP/LDPE) films and pouches	NEQ JIS Z1707-1995
83.140	G33	GB/T 10006-1988	塑料薄膜和薄片摩擦系数测定方法	Plastics--Film and sheeting--Determination of the confficients of friction	IDT ISO 8295-86
83.140	G33	GB/T 10007-1988	硬质泡沫塑料剪切强度试验方法	Cellular plastics--Determination of shear strength of rigid materials	IDT ISO 1922-81
83.140	G33	GB/T 10009-1988	丙烯腈-丁二烯-苯乙烯(ABS)塑料挤出板材	Acrylenitrile-butadiene-styrene (ABS) plastics extrusion plates
83.140	G44	GB 10213-1995	一次性使用橡胶检查手套	Singie-use rubber examination glove-Specification	NEQ ISO/DIS 11193/1-91
83.100	G44	GB/T 10652-2001	高聚物多孔弹性材料 弹性的测定	Flexible cellular polymeric materials--Determination of resilience	IDT ISO 8307:1990
83.100	G44	GB/T 10653-2001	高聚物多孔弹性材料 压缩永久变形的测定	Polymeric materials,cellular flexible--Determination of compression set	IDT ISO 1856:1980
83.100	G44	GB/T 10654-2001	高聚物多孔弹性材料 拉伸强度和拉断伸长率的测定	Flexible cellular polymeric materials--Determination of tensile strength and elongation at break	IDT ISO 1798:1997
83.100	G44	GB/T 10655-1989	高聚物多孔弹性材料空气透气率的测定	Polymeric materials, cellular flexible - Determination of air flow permeability	IDT ISO 4638-84
83.120	Q23	GB/T 10703-1989	玻璃纤维��强塑料耐水性加速试验方法	Test method accelerated for resistance of glass fiber reinforced plastics to water
83.060	G40	GB/T 10707-1989	橡胶燃烧性能测定 氧指数法	Rubber - Determination of flammability by oxygen index	NEQ ISO 4589-84
83.140.50	G43	GB/T 10708.1-2000	往复运动橡胶密封圈结构尺寸系列 第1部分: 单向密封橡胶密封圈	Reciprocating rubber seals--Types,dimensions and tolerances--Part 1:Rubber seals on one-way
83.140.50	G43	GB/T 10708.2-2000	往复运动橡胶密封圈结构尺寸系列 第2部分: 双向密封橡胶密封圈	Reciprocating rubber seals--Types,dimensions and tolerances--Part 2:Rubber seals on two-way
83.140.50	G43	GB/T 10708.3-2000	往复运动橡胶密封圈结构尺寸系列 第3部分: 橡胶防尘密封圈	Reciprocating rubber seals--Types,dimensions and tolerances--Part 3:Rubber dust seals
83.040.20	G49	GB/T 10722-1999	炭�K比表面积的测定 氮吸附方法	Carbon black--Determination of specific surface area--Nitrogen adsorption method	NEQ ISO 4652-1:1994
83.040.20	G49	GB/T 10723-1989	用ASTM标准参比炭�K改善炭�K试验再现性的标准方法	Standard method for carbon black - Improving test reproducibility using ASTM reference blacks	EQV ASTM D3324-84
83.100	G32	GB/T 10799-1989	硬质泡沫塑料开孔与闭孔体积百分率试验方法	Cellular plastics - Determination of volume percentage of open and closed cells of rigid materials	NEQ ISO 4590-81
83.100	G32	GB/T 10802-1989	软质聚氨酯泡沫塑料	Cellular plastics - Flexible polyurethane foam
83.140	G33	GB/T 10805-1989	食品包装用硬质聚氯乙烯薄膜	Rigid polyvinyl chloride film for packaging food
83.100	G32	GB/T 10807-1989	软质泡沫聚合材料压陷硬度试验方法	Polymeric materials, cellular flexible - Determination of hardness (indentation technique)	IDT ISO 2439-80
83.100	G32	GB/T 10808-1989	软质泡沫塑料撕裂性能试验方法	Cellular plastics - Tear resistance test for flexible materials	EQV ASTM D3574-81
83.160	G41	GB/T 10823-1996	充气轮胎轮辋实心轮胎系列	Series of solid tyres for pneumatic tyres rims
83.160	G41	GB/T 10824-1996	充气轮胎轮辋实心轮胎	Solid tyres for pneumatic tyres rims
83.200	G95	GB/T 10902-1989	塑料混合机	Plastics mixer machines
83.200	G95	GB/T 10903-1989	塑料混合机 检测方法	Check method of mixer for plastics
83.080	G32	GB 11115-1989	低密度聚乙烯树脂	Low density polyethylene resin
83.080	G32	GB 11116-1989	高密度聚乙烯树脂	High density polyethylene resin
83.040.10	G39	GB/T 11175-1989	聚乙酸乙烯酯乳液试验方法	Testing methods for polyvinyl acetate emulsion	NEQ JIS K6828-80
83.180	G38	GB/T 11177-1989	无机胶粘剂套接压缩剪切强度试验方法	Testing method for compressive shear strength of dowel joint by inorganic adhesives
83.160.20	G41	GB/T 11191-1989	航空轮胎爆破压力试验方法	Burst pressure test method for aircraft tyre	NEQ ISO 3324/2-79
83.160.20	G41	GB/T 11192-1989	航空轮胎静负荷性能试验方法	Test method of static loaded perfor mance for aircraft tyre	NEQ ISO 3324/2-79
83.160.20	G41	GB/T 11193-1998	航空轮胎外缘尺寸测量方法	Method of mesuring pneumatic ircraft tyre peripheral dimensions	NEQ ISO 3324/2-1979
83.160.20	G41	GB/T 11194-1989	航空无内胎轮胎气密性能试验方法	Air retention test method for tubeless aircraft tyre	NEQ ISO 3324/2-79
83.160.20	G41	GB/T 11195-1998	航空有内胎轮胎胎圈密合压力试验方法	Bead fit test method for tube aircraft tyre	NEQ ISO 3324/2-1979
83.160.20	G41	GB/T 11196-1989	航空轮胎断面分析测量方法	Section diagnose and measure method for aircraft tyre
83.060	G40	GB/T 11201-1989	硫化橡胶中金属含量的测定 火焰原子吸收光谱法 第四部分: 铁含量的测定	Vulcanized rubber - Determination of metal content - Flame atomic absorption spectrometric method - Part 4: Determination of iron content	NEQ ISO/DIS 9027-87
83.060	G40	GB/T 11202-1989	橡胶中铁含量的测定 1,10-菲罗啉光度法	Rubber - Determination of iron content - 1,10-Phenanthroline photometric method	NEQ ISO 1657-86
83.060	G40	GB/T 11203-2001	橡胶中锌含量的测定 EDTA滴定法	Rubber--Determination of zinc content--EDTA titrimetric method	EQV ISO 2454:1995
83.060	G40	GB/T 11205-1989	橡胶热导率的测定 瞬态热丝法	Rubber - Determination of thermal conductivity by means of transient hot-wire method
83.060	G40	GB/T 11206-1989	硫化橡胶老化表面龟裂试验方法	Rubber vulcanized - The test method of deteration surface cracking
83.060	G40	GB/T 11208-1989	硫化橡胶滑动磨耗的测定	Rubber, vulcanized - Determination of abrasion resistance under slipping	NEQ ΓOCT 426-77
83.060	G40	GB/T 11209-1989	磁性橡胶磁性能的测定方法	Magnetic rubber - Determination method of magnetic properties
83.060	G40	GB/T 11210-1989	硫化橡胶抗静电和导电制品电阻的测定	Rubber, vulcanized - Antistatic and conductive products - Determination of electrical resistance	EQV ISO 2878-87
83.060	G40	GB/T 11211-1989	硫化橡胶与金属粘合强度的测定 拉伸法	Rubber, vulcanized - Determination of adhesion to metal - Tension method	EQV ISO 814-86
83.040.20	G71	GB/T 11407-1989	硫化促进剂 M	Vulcanizing accelerator M	NEQ JIS K6202-84
83.040.20	G71	GB/T 11408-1989	硫化促进剂 DM	Vulcanizing accelerator DM	NEQ JIS K6202-84
83.040.20	G70	GB/T 11409.1-1995	橡胶防老剂、硫化促进剂 熔点测定方法	Test method of fusion point for rubber antiagers and vulcanizing accelerators
83.040.20	G70	GB/T 11409.2-1995	橡胶防老剂、硫化促进剂 结晶点测定方法	Test method of crystallizing point for rubber antiagers and vulcanizing accelerators	EQV ISO 1392-77
83.040.20	G70	GB/T 11409.3-1989	橡胶防老剂、硫化促进剂软化点的测定方法	Test method of softening point for rubber antiagers and vulcanizing accelerators	NEQ JIS K6220-86
83.040.20	G70	GB/T 11409.4-1989	橡胶防老剂、硫化促进剂加热减量的测定方法	Test method of weight loss on heating for rubber antiagers and vulcanizing accelerators	NEQ JIS K6220-86
83.040.20	G70	GB/T 11409.5-1989	橡胶防老剂、硫化促进剂筛余物的测定方法	Test method of residue on sieve for rubber antiagers and vulcanizing accelerators	NEQ JIS K6220-86
83.040.20	G70	GB/T 11409.6-1989	橡胶防老剂、硫化促进剂表观密度的测定	Test method of apparent density for rubber antiagers and vulcanizing accelerators	NEQ JIS K6220-86
83.040.20	G70	GB/T 11409.7-1989	橡胶防老剂、硫化促进剂灰分的测定方法	Test method of ash for rubber antiagers and vulcanizing accelerators	NEQ JIS K6220-86
83.040.20	G70	GB/T 11409.8-1989	橡胶防老剂、硫化促进剂粘度的测定方法 旋转粘度计法	Test method of viscosity for rubber antiagers and vulcanizing accelerators--Rotational viscometer method	NEQ JIS K6220-86
83.040.20	G70	GB/T 11409.9-1989	橡胶防老剂、硫化促进剂盐酸不溶物含量的测定方法	Test method of insoluble matter in hydrochloric acid for rubber antiagers and vulcanizing accelerators	NEQ JIS K6220-86
83.080	G32	GB/T 11546-1989	塑料拉伸蠕变测定方法	Plastics--Determination of tensile creep	EQV ISO 899-81
83.080	G32	GB/T 11547-1989	塑料耐液体化学药品(包括水)性能测定方法	Plastics--Determination of the effects of liquid chemicals including water	EQV ISO 176-81
83.080	G32	GB/T 11548-1989	硬质塑料板材耐冲击性能试验方法 (落锤法)	Standard test method for impact resistance of rigid plastic sheeting by means of a tup (falling weight)	NEQ ASTM D3029-84
83.140	Q22	GB/T 11982.2-1996	聚氯乙烯卷材地板 第2部分：有基材有背涂层聚氯乙烯卷材地板	PVC floor sheets--Part 2: PVC floor sheets having base with back	NEQ DIN 16851-1980
83.080	G31	GB/T 11991-1989	离子交换树脂转型膨胀率测定方法	Ion exchange resins - Determination for swelling upon complete conversion
83.080	G31	GB/T 11992-1989	氯型强碱性阴离子交换树脂交换容量测定方法	Strong basic anion exchange resins in chloride form - Determination of exchange capacity	NEQ ASTM D2187-82
83.080	G31	GB/T 11997-1989	塑料多用途试样的制备和使用	Plastics - Preparation and use of multipurpose test specimens	EQV ISO 3167-83
83.080	G31	GB/T 11998-1989	塑料玻璃化温度测定方法 热机械分析法	Determination of glass transition temperature of plastics--Thermomechanical analysis
83.140	G31	GB/T 11999-1989	塑料薄膜和薄片耐撕裂性试验方法 埃莱门多夫法	Plastics--Film and sheeting - Determination of tear resistance - Elmendorf method	EQV ISO 6383/2-83
ICS 国際規格分類	中国標準分類	規格番号	規格名称(中国語)	規格名称(英語)	国際整合
83.080	G31	GB/T 12000-1989	塑料在恒定湿热条件下曝露试验方法	Plastics - Test methods of exposure to damp heat,steady state	NEQ ISO 4611-87
83.080	Q74	GB/T 12001.1-1989	未�搗Y聚氯乙烯窗用模塑料 第一部分: 命名	Moulding materials for windows of unplasticized polyvinyl chloride - Part 1: Designation	NEQ ISO 1163/1-85
83.080	Q74	GB/T 12001.2-1989	未�搗Y聚氯乙烯窗用模塑料 第二部分: 质量规格	Moulding materials for windows of unplasticized polyvinyl chloride - Part 2: Quality specification	NEQ ISO 1163/2-80
83.080	Q74	GB/T 12001.3-1989	未�搗Y聚氯乙烯窗用模塑料 第三部分: 性能试验方法	Moulding materials for windows of unplasticized polyvinyl chloride - Part 3: Determination of properties	NEQ ISO 1163/2-80
83.080	G31	GB/T 12004.1-1989	聚氯乙烯糊树脂中杂质粒子数测定方法	Determination of impurities particles number in polyvinyl chloride paste resins	EQV ГOCT 14039-78
83.080.01	G32	GB/T 12004.2-1996	聚氯乙烯糊树脂 糊的制备	PVC paste resins--Preparation of a paste	EQV ISO 4612-1979
83.080	G31	GB/T 12004.3-1989	聚氯乙烯�搗Y糊表观粘度测定方法	Determination for apparent viscosity of polyvinyl chloride paste	EQV ISO 4575-85
83.080	G31	GB/T 12004.4-1989	聚氯乙烯�搗Y糊 Brookfield 粘度测定方法	Polyvinyl chloride plastisols - Determination for Brookfield viscosity	EQV ASTM D1824-83
83.080	G32	GB/T 12004.5-1992	聚氯乙烯�搗Y糊刮板细度的测定	Polyvinyl chloride plastsols--Determination of fineness of grind
83.080	G31	GB/T 12005.1-1989	聚丙烯酰胺特性粘数测定方法	Determination for limiting viscosity number of polyacrylamide
83.080	G31	GB/T 12005.2-1989	聚丙烯酰胺固含量测定方法	Determination for solid content of polyacrylamide
83.080	G31	GB/T 12005.3-1989	聚丙烯酰胺中残留丙烯酰胺含量测定方法 溴化法	Determination for residual acrylamide of polyacrylamide - Bromating method
83.080	G31	GB/T 12005.4-1989	聚丙烯酰胺中残留丙烯酰胺含量测定方法 液相色谱法	Determination for residual acrylamide of polyacrylamide - Liquid chromatography
83.080	G31	GB/T 12005.5-1989	聚丙烯酰胺中残留丙烯酰胺含量测定方法 气相色谱法	Determination for residual acrylamide content of polyacrylamide - Gas chromatograghy
83.080	G31	GB/T 12005.6-1989	部分水解聚丙烯酰胺水解度测定方法	Determination for hydrolysis degree of partly hydrolysis polyacrylamide
83.080	G31	GB/T 12005.7-1989	粉状聚丙烯酰胺粒度测定方法	Determination for particle size of pow der polyacrylamide
83.080	G31	GB/T 12005.8-1989	粉状聚丙烯酰胺溶解速度测定方法	Determination for dissolving velocity of pow der polyacrylamide
83.080	G31	GB/T 12005.9-1992	聚丙烯酰胺命名	Designation of polyacrylamide
83.080	G32	GB/T 12005.10-1992	聚丙烯酰胺分子量测定 粘度法	Determination for molecular weight of polyacrylamide by viscometry
83.080	G31	GB/T 12006.1-1989	聚酰胺粘数测定方法	Polyamides - Determination of viscosity number	NEQ ISO 307-84
83.080	G31	GB/T 12006.2-1989	聚酰胺含水量测定方法	Polyamides - Determination of water content	NEQ ISO/DIS 960-86
83.080	G31	GB/T 12006.3-1989	聚酰胺灰分测定方法	Polyamides - Determination of ash	EQV ISO 3451/4-86
83.080	G31	GB/T 12006.4-1989	聚酰胺均聚物 沸腾甲醇可提取物测定方法	Polyamide homopolymers - Determination of matter extractable by boiling methanol	EQV ISO 599-85
83.080	G31	GB/T 12007.1-1989	环氧树脂颜色测定方法 加�ｺ纳色度法	Epoxide resins - Determination of color - Gardner color scale	NEQ ASTM D1544-80
83.080	G31	GB/T 12007.2-1989	环氧树脂钠离子测定方法	Epoxide resins - Determination of sodium ion
83.080	G31	GB/T 12007.3-1989	环氧树脂总氯含量测定方法	Epoxide resins - Determination of total chlorine content	EQV ISO 4615-79
83.080	G31	GB/T 12007.4-1989	环氧树脂粘度测定方法	Epoxide resins - Determination of viscosity	NEQ ISO 3219-77
83.080	G31	GB/T 12007.5-1989	环氧树脂密度测定方法 比重瓶法	Epoxide resins - Determination of density - Pyknometer method	EQV ISO 1675-85
83.080	G31	GB/T 12007.6-1989	环氧树脂软化点测定方法 环球法	Epoxide resins - Determination of softening point - Ring and ball method	NEQ ISO 4625-80
83.080	G31	GB/T 12007.7-1989	环氧树脂凝胶时间测定方法	Determination of gelation time of epoxide resins	NEQ BS 2783.835C-80
83.080	G31	GB/T 12008.1-1989	聚醚多元醇命名	Polyether polyols - Designation
83.080	G31	GB/T 12008.2-1989	聚醚多元醇规格	Polyether polyols - Specification	NEQ JIS K1601/1602-82
83.080	G31	GB/T 12008.3-1989	聚醚多元醇中羟值测定方法	Polyether polyols - Determination of hydroxyl number	NEQ ASTM D2849-80
83.080	G31	GB/T 12008.4-1989	聚醚多元醇中钠和钾测定方法	Polyether polyols - Determination of sodium and potassium	NEQ ASTM D2849-80
83.080	G31	GB/T 12008.5-1989	聚醚多元醇中酸值测定方法	Polyether polyols - Determination of acid number	NEQ ASTM D2849-80
83.080	G31	GB/T 12008.6-1989	聚醚多元醇中水分含量测定方法	Polyether polyols - Determination of water content	NEQ ASTM D2849-80
83.080	G32	GB/T 12008.7-1992	聚醚多元醇中不饱和度的测定	Polyether Polyols--Determination of unsaturation	NEQ ASTM D 4671-87
83.080	G32	GB/T 12008.8-1992	聚醚多元醇的粘度测定	Polyether polyols--Determination of viscosity
83.080	G31	GB/T 12009.2-1989	异氰酸酯中水解氯含量测定方法	Isocyanates - Determination of hydrolyzable chlorine content	EQV ASTM D1638-74
83.080	G31	GB/T 12009.3-1989	多亚甲基多苯基异氰酸酯粘度测定方法	Polymethylene polyphenyl isocyanate - Determination of viscosity	EQV ASTM D1638-74
83.080	G31	GB/T 12009.4-1989	多亚甲基多苯基异氰酸酯中异氰酸根含量测定方法	Polymethylene polyphenyl isocyanato - Determination of isocyanate content	IDT ASTM D1638-74
83.080	G32	GB/T 12009.5-1992	异氰酸酯中酸度的测定	Isocyanates--Determination of acidity	EQV ASTM D1638-74
83.080	G31	GB/T 12009.1-1989	异氰酸酯中总氯含量测定方法	Isocyanates - Determination of total chlorine content	EQV ASTM D1638-74
83.080	G31	GB/T 12010.1-1989	聚乙烯醇树脂命名	Polyvinyl alcohol resins - Designation
83.080	G31	GB/T 12010.2-1989	聚乙烯醇树脂规格	Polyvinyl alcohol resins - Specification
83.080	G31	GB/T 12010.3-1989	聚乙烯醇树脂粘度测定方法	Determination for viscocity of polyvinyl alcohol resins	NEQ JIS K6726-77
83.080	G31	GB/T 12010.4-1989	聚乙烯醇树脂挥发分测定方法	Determination for volatile matter of polyvinyl alcohol resins	NEQ JIS K6726-86
83.080	G31	GB/T 12010.5-1989	聚乙烯醇树脂残留乙酸根(或醇解度)测定方法	Determination for residual acetic radical contents (or alcoholysis) of polyvinyl alcohol resins	NEQ JIS K6726-86
83.080	G31	GB/T 12010.6-1989	聚乙烯醇树脂乙酸钠含量测定方法	Determination for sodium acetate contents of polyvinyl alcohol resins	NEQ JIS K6726-86
83.080	G31	GB/T 12010.7-1989	聚乙烯醇树脂灰分测定方法	Determination for ash content of polyvinyl alcohol resins	NEQ JIS K6726-86
83.080	G31	GB/T 12010.8-1989	聚乙烯醇树脂 pH 值测定方法	Determination for pH of polyvinyl alcohol resins	NEQ JIS K6726-86
83.080	G31	GB/T 12010.9-1989	聚乙烯醇树脂平均聚合度测定方法	Determination for average polymerization degree of polyvinyl alcohol resins	NEQ JIS K6726-86
83.080	G31	GB/T 12010.10-1989	聚乙烯醇树脂粒度测定方法	Determination for particle size of polyvinyl alcohol resins	NEQ JIS K6726-86
83.080	G31	GB/T 12010.11-1989	聚乙烯醇树脂氢氧化钠含量测定方法	Determination for sodium hydroxide contents of polyvinyl alcohol resins	NEQ JIS K6726-86
83.080	G31	GB/T 12010.12-1989	聚乙烯醇树脂透明度测定方法	Determination for transparency of polyvinyl alcohol resins	NEQ JIS K6726-86
83.140	G33	GB/T 12025-1989	高密度聚乙烯吹塑薄膜	High density polyethylene blow film	NEQ JIS Z1702-86
83.140.10	G33	GB/T 12026-2000	热封型双向拉伸聚丙烯薄膜	Biaxially oriented polypropylene film for heat--seal	NEQ JIS Z 1712:1997
83.140	G33	GB/T 12027-1989	塑料薄膜尺寸变化率试验方法	Test method for dimensional stability of plastic films	NEQ DIN 53377-69
83.180	J31	GB/T 12216-1990	铸造用合脂粘结剂	The residue from distillation of synthetic fatty acids as binder for foundry
83.140	G40	GB/T 12586-1990	橡胶或塑料涂覆织物耐屈挠破坏性能的测定 动态法	Rubber or plastics coated fabrics - Determination of resistance to damage by flexing(Dynamic method)	IDT ISO 7854-84
83.140	G40	GB/T 12587-1990	橡胶或塑料涂覆织物抗压裂性能的测定	Rubber or plastics coated fabrics - Determination of crush resistance	IDT ISO 5473-79
83.140	G40	GB/T 12588-1990	塑料涂覆织物 聚氯乙烯涂覆层快速测融法	Plastics coated fabrics - Polyvinyl chloride coatings - Rapid method for checking fusion	IDT ISO 6451-82
83.080.20	G32	GB/T 12598-2001	离子交换树脂渗磨圆球率、磨后圆球率的测定	Determination for sphericity of ion exchange resins after attrition or osmotic-attrition
83.080.20	G32	GB 12670-1990	聚丙烯树脂	Polypropylene resin
83.080.20	G32	GB 12671-1990	聚苯乙烯树脂	Polystyrene resin
83.080.20	G32	GB 12672-1990	丙烯腈-丁二烯-苯乙烯(ABS)树脂	Acrylonitrile-butadiene-styrene (ABS) resin
83.200	G95	GB/T 12784-1991	橡胶塑料加压式捏炼机	Dispersion mixer for rubber and plastics
83.140	K15	GB/T 12802-1996	电容器用聚丙烯薄膜	Polypropylene film for capacitors	NEQ IEC 60674-3-1
83.100	G32	GB/T 12811-1991	硬质泡沫塑料平均泡孔尺寸试验方法	Test method for average cell size of rigid cellular plastics	NEQ ASTM D3576-77
83.100	G32	GB/T 12812-1991	硬质泡沫塑料滚动磨损试验方法	Test method for tumbling friability of rigid cellular plastics	EQV ASTM C421-83
83.060	G35	GB 12824-1991	丁苯橡胶 SBR1502	Rubber, styrene butadiene SBR1502
83.100	G44	GB/T 12825-1991	高聚物多孔弹性材料凹入度法硬度试验	Polymeric materials, cellular flexible - Determination of hardness (indentation technique)	NEQ ISO 2439-80(E)
83.040.20	G40	GB/T 12827-1991	标准参比乙炔炭�K及鉴定方法	Standard reference acetylene black and standard practice for evaluation	NEQ ASTM D4122-88
83.040.10	G40	GB/T 12828-1991	生胶和混炼胶塑性值及复原值的测定 平行板法	Rubber, raw and unvuicanized compounded - Determination of plasticity number and recovery number - Parallel plate method	EQV ISO 7323-85
83.060	G40	GB/T 12829-1991	硫化橡胶小试样(�ｺ尔夫特试样)撕裂强度的测定	Rubber, vulcanized - Determination of tear strength of small test pieces (Delft test pieces)	EQV ISO 816-83
83.060	G40	GB/T 12830-1991	硫化橡胶与金属粘合剪切强度测定方法 四板法	Rubber, vulcanized - Determination of adhesion to metal plates in shear - Quadruple shear method	EQV ISO 1747-76
83.060	G40	GB/T 12831-1991	硫化橡胶人工气候(氙灯)老化试验方法	Rubber, vulcanized - Test method of resistance to artificial weathering (xenon are lamp)	NEQ ISO 4665/3-87
83.060	G40	GB/T 12832-1991	橡胶结晶效应的测定 硬度测量法	Rubbers - Determination of crystallization effects by hardness measurements	EQV ISO 3387-78
83.060	G40	GB/T 12833-1991	橡胶和塑料撕裂强度及粘合强度多峰曲线的分析方法	Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength	EQV ISO 6133-81
83.060	G40	GB/T 12834-2001	硫化橡胶 性能优选等级	Rubber,vulcanized--Preferred gradations of properties	IDT ISO 1433:1995
83.160.30	G41	GB 12835-2001	胶座气门嘴	Rubber base valves	NEQ JIS D 9422:1983
83.160.10	G41	GB 12836.1-1999	无内胎气门嘴 第1部分: 卡扣式气门嘴	Tubeless valves-Part 1: Snap-in valves	NEQ DIN 7780:1982 DIN 78030:1983
83.160.10	G41	GB 12837-1999	大芯腔轮胎气门嘴	Tyre valves for large core chamber	NEQ JIS D4207:1994
83.160.10	G41	GB 12838-1999	大芯腔轮胎气门芯	Tyre valve cores for large core chamber	NEQ JIS D4211:1994
83.160.01	G41	GB/T 12839-1997	轮胎气门嘴 术语及其定义	Tyre valves--Terms and definitions	NEQ ISO 3877-2:1978
83.140	Q17	GB 12952-1991	聚氯乙烯防水卷材	Polyvinyl chloride (PVC) plastic sheets for waterproofing
83.140	Q17	GB 12953-1991	氯化聚乙烯防水卷材	Chlorinated polyethylene plastic sheets for waterproofing
ICS 国際規格分類	中国標準分類	規格番号	規格名称(中国語)	規格名称(英語)	国際整合
83.040.20	G33	GB/T 13021-1991	聚乙烯管材和管件炭�K含量的测定 热失重法	Determination for the carbon black content of polyethylene pipes and fittings by calcination and pyrolysis	NEQ ISO 6964-86
83.140	G33	GB/T 13022-1991	塑料 薄膜拉伸性能试验方法	Plastics - Determination of tensile properties of films	NEQ ISO 1184-83
83.120	Q23	GB/T 13096.1-1991	拉挤玻璃纤维��强塑料杆拉伸性能试验方法	Test method for tensile properties of pultruded glass fiber reinforced plastic rods	NEQ ASTM D3916-84
83.120	Q23	GB/T 13096.2-1991	拉挤玻璃纤维��强塑料杆弯曲性能试验方法	Test method for flexural properties of pultruded glass fiber reinforced plastic rods	EQV ASTM D4476-85
83.120	Q23	GB/T 13096.3-1991	拉挤玻璃纤维��强塑料杆面内剪切强度试验方法	Test method for in plane shear strength of pultruded glass fiber reinforced plastic rods	EQV ASTM D3914-86
83.120	Q23	GB/T 13096.4-1991	拉挤玻璃纤维��强塑料杆表观水平剪切强度短梁剪切试验方法	Test method for apparent horizontal shear strength of pultruded glass fiber reinforced plastic rods by the short beam method	EQV ASTM D4475-85
83.160.30	G41	GB/T 13203-1991	摩托车轮胎强度性能试验方法	Strength test for motorcycle tyres	NEQ JATMA-81
83.160.30	G41	GB/T 13204-1991	磨托车轮胎高速性能试验方法 转鼓法	High speed performance test for motorcycle tyres - Drum method	NEQ JATMA-81
83.160.30	G41	GB/T 13205-1991	磨托车轮胎耐久性能试验方法 转鼓法	Endurance test for motorcycle tyres - Drum method	NEQ JIS K6366-82
83.060	G40	GB/T 13248-1991	硫化橡胶中锰含量的测定 高碘酸钠光度法	Vulcanized rubber - Determination of manganese content - Sodium periodate photometric methods	NEQ ISO/DIS 7780-82
83.060	G40	GB/T 13249-1991	硫化橡胶中橡胶含量的测定 管式炉热解法	Rubber vulcanized - Determination of rubber content - Furnace tube pyrolytic method	NEQ BS 903 B12-60
83.060	G40	GB/T 13250-1991	硫化橡胶中总硫量的测定 过氧化钠熔融法	Vulcanized rubber - Determination of total sulfur content - Sodium peroxide fusion method	NEQ ISO 6528/2-83
83.060	G40	GB/T 13253-1991	硫化橡胶中金属含量的测定 火焰原子吸收光谱法 第五部分: 锰含量的测定	Vulcanized rubber - Determination of metal content - Flame atomic absorption spectrometric method--Part 5: Determination of manganese content	NEQ ISO 6101/4-88
83.180	G38	GB/T 13353-1992	胶粘剂耐化学试剂性能的测定方法 金属与金属	Test method for resistance of adhesive bonds to chemical reagents - Metal to metal	IDT ASTM D896-84
83.180	G38	GB/T 13354-1992	液态胶粘剂密度的测定方法 重量杯法	Test method for density of adhesives in fluid form - Method of weight cup	NEQ ASTM D1875-80
83.080.20	G32	GB/T 13453.1-1992	氯乙烯均聚物和共聚物树脂水中筛析方法	Test method of vinyl chloride homopolymer and copolymerresins - Sieve analysis in water	IDT ISO 1624-78
83.080.20	G32	GB/T 13453.2-1992	聚氯乙烯树脂甲醇或乙醇萃取物含量的测定方法	Determination for the content of methanol or ethanol extract of polyvinyl chloride resins	IDT ASTM D2222-66(88)
83.080.20	G32	GB/T 13453.3-1992	聚氯乙烯灰分和硫酸化灰分的测定	Determination of ash and sulphated ash of PVC	EQV ISO 3451.5-1989(E)
83.080.20	G32	GB 13454-1992	氨基模塑料	Plastics - Aminoplastic moulding materials - Specification	NEQ ISO 2112-77
83.080.20	G32	GB/T 13455-1992	氨基模塑料挥发物测定方法	Plastics - Aminoplastic moulding materials - Determination of volatile matter	NEQ ISO 3671-76(E)
83.060	G48	GB/T 13460-1992	再生橡胶	Reclaimed rubber
83.140	A82	GB/T 13508-1992	聚乙烯吹塑桶	Polyethylene blown containers
83.140	G33	GB/T 13519-1992	聚乙烯热收缩薄膜	Heat shrinkable polyethylene film	NEQ JIS Z1709-85
83.140	G33	GB/T 13520-1992	硬质聚氯乙烯挤出板材	Unplasticized polyvinyl chloride extruded plates
83.080	G31	GB/T 13525-1992	塑料拉伸冲击性能试验方法	Test method for tensile-impact property of plastics	NEQ DIN 53448-77
83.140	K13	GB/T 13541-1992	电气用塑料薄膜试验方法	Test methods of plastic films for electrical purposes	NEQ IEC 60674-2-88
83.140	K13	GB/T 13542-1992	电气用塑料薄膜一般要求	General requirements for plastic films for electrical purposes	NEQ IEC 60674-1-80
83.140.01	G42	GB 13552-1998	汽车多楔带	Automotive V-ribbed belts	EQV ISO 11749:1996
83.180	G38	GB/T 13553-1996	胶粘剂分类	Classification of adhesives	NEQ BS 5407-76
83.060	G40	GB/T 13642-1992	硫化橡胶耐臭氧老化试验 动态拉伸试验法	Rubber, Vulcanized--Resistance to ozone ageing-Dynamic strain test method	NEQ ISO 1431/2-82
83.060	G40	GB/T 13643-1992	硫化橡胶或热塑性橡胶 压缩应力松弛的测定 环状试样	Rubber, vulcanized or thermoplastic--Determination of compression stress relaxation(rings)	EQV ISO 6056-87
83.060	G40	GB/T 13644-1992	硫化橡胶中镁含量的测定 CyDTA 滴定法	Vulcanized rubber--Determination of magnesium content - CyDTA titration
83.060	G40	GB/T 13645-1992	硫化橡胶中钙含量的测定 EGTA滴定法	Vulcanized rubber - Determination of calcium content - EGTA titration
83.060	G40	GB/T 13646-1992	橡胶中结合苯乙烯含量的测定 分光光度法	Rubber - Determination of bound styrene content - Spectrophotometric method	NEQ ISO 5478-80
83.060	G40	GB/T 13647-1992	橡胶制品用原材料筛余物的测定 水冲洗法	Compounding ingredients for rubber products--Determination of sieve residue - Water-flushing method	NEQ ISO 1437-85
83.160.20	G41	GB 13651-1998	翻新航空轮胎	Retreaded aircraft tyre	NEQ AC 145-4
83.160.20	G41	GB/T 13652-1992	航空轮胎表面质量	Surface quality of aircraft tyre	NEQ MIL 698B-77
83.160.20	G41	GB/T 13653-1992	航空轮胎X射线检测方法	X-ray inspection method for aircraft tyre	NEQ MIL R7726E
83.160.20	G41	GB/T 13654-1992	航空轮胎全息照像检测方法	Method of holographic inspection for aircraft tyre
83.160.20	G41	GB/T 13655-1992	航空轮胎静平衡差度试验方法	Static unbalance test method for aircraft tyre
83.160.20	G41	GB/T 13656-1992	航空轮胎物理性能试验方法	Physical properties test method for aircraft tyres
83.080	G32	GB/T 13657-1992	双酚-A型环氧树脂	Bisphenol - A epoxy resins	NEQ ASTM D1763-81
83.080	G32	GB/T 13659-1992	001×7 强酸性苯乙烯系阳离子交换树脂	001×7 Strongly acidic styrene type cation exchange resins
83.080	G32	GB/T 13660-1992	201×7 强碱性苯乙烯系阴离子交换树脂	201×7 Strongly basic styrene type anion exchange resins
83.140.30	G33	GB/T 13663-2000	给水用聚乙烯(PE)管材	Polyethylene pipes for water supply	NEQ ISO 4427:1996
83.140	Y28	GB 13735-1992	聚乙烯吹塑农用地面覆盖薄膜	Polyethylene blown mulch film for agricultural uses
83.060	G40	GB/T 13934-1992	硫化橡胶屈挠龟裂的测定	Rubber, vulcanized--Determination of flex cracking	NEQ ISO 132-83
83.060	G40	GB/T 13935-1992	硫化橡胶裂口��长的测定	Rubber, vulcanized--Determination of crack growth	NEQ ISO 133-83
83.060	G40	GB/T 13936-1992	硫化橡胶与金属粘接拉伸剪切强度测定方法	Rubber, vulcanized--Method for determination of strength properties of adhesive to metal in shear by tension loading	NEQ ASTM D 3164-73(84)
83.060	G40	GB/T 13937-1992	分级用硫化橡胶动态性能的测定 强迫正弦剪切应变法	Rubber--Determination of dynamic properties of vulcanizates for classification purposes (by forced sinusoidal shear strain)	EQV ISO 4664-1987
83.060	G40	GB/T 13938-1992	硫化橡胶自然贮存老化试验方法	Rubber,vulcanized--Test method of natural storage aging	EQV ISO 2330-1973
83.060	G40	GB/T 13939-1992	硫化橡胶热氧老化试验方法 管式仪法	Rubber, vulcanized--Test method of heat and oxygen--Tube tester ageing method	NEQ ASTM D 572-88
83.080	G32	GB/T 13940-1992	聚丙烯酰胺	Polyacrylamide
ICS 国際規格分類	中国標準分類	規格番号	規格名称(中国語)	規格名称(英語)	国際整合
83.180	B60	GB/T 14074.1-1993	木材胶粘剂及其树脂检验方法 外观测定法	Testing methods for wood adhesives and their resins--Method for determination of appearance
83.180	B60	GB/T 14074.2-1993	木材胶粘剂及其树脂检验方法 密度测定法	Testing methods for wood adhesives and their resins--Method for determination of density
83.180	B60	GB/T 14074.3-1993	木材胶粘剂及其树脂检验方法 粘度测定法	Testing methods for wood adhesives and their resins--Method for determination of viscosity
83.180	B60	GB/T 14074.4-1993	木材胶粘剂及其树脂检验方法 pH值测定法	Testing methods for wood adhesives and their resins--Method for determination of pH
83.180	B60	GB/T 14074.5-1993	木材胶粘剂及其树脂检验方法 固体含量测定法	Testing methods for wood adhesives and their resins--Method for determination of solid content
83.180	B60	GB/T 14074.6-1993	木材胶粘剂及其树脂检验方法 水混和性测定法	Testing methods for wood adhesives and their resins--Method for determination of miscibility with water
83.180	B60	GB/T 14074.7-1993	木材胶粘剂及其树脂检验方法 固化时间测定法	Testing methods for wood adhesives and their resins--Method for determination of gelation time
83.180	B60	GB/T 14074.8-1993	木材胶粘剂及其树脂检验方法 适用期测定法	Testing methods for wood adhesives and their resins--Method for determination of pot life
83.180	B60	GB/T 14074.9-1993	木材胶粘剂及其树脂检验方法 贮存稳定性测定法	Testing methods for wood adhesives and their resins--Method for determination of storage
83.180	B60	GB/T 14074.10-1993	木材胶粘剂及其树脂检验方法 木材胶合强度测定法	Testing methods for wood adhesives and their resins--Method for determination of wood glue bond strength
83.180	B60	GB/T 14074.11-1993	木材胶粘剂及其树脂检验方法 含水率测定法	Testing methods for wood adhesives and their resins--Method for determination of moisture content
83.180	B60	GB/T 14074.12-1993	木材胶粘剂及其树脂检验方法 聚合时间测定法	Testing methods for wood adhesives and their resins--Method for determination of curing speed
83.180	B60	GB/T 14074.13-1993	木材胶粘剂及其树脂检验方法 游离苯酚含量测定法	Testing methods for wood adhesives and their resins--Method for determination of free phenol content
83.180	B60	GB/T 14074.14-1993	木材胶粘剂及其树脂检验方法 可被溴化物测定法	Testing methods for wood adhesives and their resins--Method for determination of brominable substance
83.180	B60	GB/T 14074.15-1993	木材胶粘剂及其树脂检验方法 碱量测定法	Testing methods for wood adhesives and their resins--Method for determination of alkali content
83.180	B60	GB/T 14074.16-1993	木材胶粘剂及其树脂检验方法 游离甲醛含量测定法	Testing methods for wood adhesives and their resins--Method for determination of free formaldehyde content
83.180	B60	GB/T 14074.17-1993	木材胶粘剂及其树脂检验方法 羟甲基含量测定法	Testing methods for wood adhesives and their resins--Method for determination of methylol content
83.180	B60	GB/T 14074.18-1993	木材胶粘剂及其树脂检验方法 沉析温度测定法	Testing methods for wood adhesives and their resins--Method for determination of precipitation temperature
83.080	G33	GB/T 14153-1993	硬质塑料落锤冲击试验方法 通则	General test method for impact resistance of rigid plastics by means of falling weight	NEQ JIS K7211-76
83.080	W51	GB/T 14189-1993	纤维级聚酯切片	Fiber grade polyester chip
83.080	W50	GB/T 14190-1993	纤维级聚酯切片分析方法	Analysis methods for fiber grade polyester chip
83.140	G33	GB/T 14216-1993	塑料 膜和片润湿张力试验方法	Plastics--Film and sheeting--Test method for wetting tension	EQV ISO 8296-1987
83.140	G31	GB/T 14234-1993	塑料件表面粗糙度	Surface roughness for plastic parts
83.100	G44	GB/T 14274-1993	高聚物多孔弹性材料加速老化试验	Polymeric materials cellular flexible--Accelerated ageing tests	EQV ISO 2440-1983
83.140	A83	GB/T 14447-1993	塑料薄膜静电性测试方法 半衰期法	Test method for electrostatic properties of plastic films--Half-life method	NEQ DIN 53486
83.080	G31	GB/T 14483-1993	塑料负载变形试验方法	Test methods for deformation of plastics under load	NEQ ASTM D 621
83.080	G31	GB/T 14484-1993	塑料承载强度试验方法	Test method for bearing strength of plastics	NEQ ASTM D 953
83.080	G31	GB/T 14485-1993	工程塑料硬质塑料板材及塑料件耐冲击性能试验方法落球法	Standard methods of testing for impact resistance of plats and pats made from engineering plastic rigid plastics by a ball(falling ball)	NEQ ASTM D 639-81(1985)
83.080	G31	GB/T 14486-1993	工程塑料模塑塑料件尺寸公差	Dimensional tolerances for plastic engineering moulded plastic pats	NEQ DIN 16901
83.080	G31	GB/T 14519-1993	塑料在玻璃板过滤后的日光下间接曝露试验方法	Plastics--Method of exposure to indirect weathering using glass-filtered daylight	NEQ ISO 877-76
83.080	G32	GB/T 14520-1993	气相色谱分析法测定不饱和聚酯树脂��强塑料中的残留苯乙烯单体含量	Determination of residual styrene monomer content in reinforced plastics based on unsaturated polyester resins by gas chromatography	NEQ ISO 4901-85
83.080.20	G31	GB/T 14572-1993	热塑性塑料树脂产品检验规则及标志、包装、贮运规定	Rules for inspecting,marking,packing,storing and transporting of thermoplastic materials
83.080	G32	GB/T 14590-1993	钮扣用液体不饱和聚酯树脂	Liquid unsaturated polyester resin for button
83.160	G41	GB 14646-1993	翻新和修补轮胎(子午线轮胎)	Retreading and repair of tyres(radial tyres)	NEQ BS AU 144C-1988
83.060	G35	GB/T 14647-1993	氯丁橡胶CR121	Chloroprene rubber CR121
83.080	G31	GB/T 14694-1993	塑料压缩弹性模量的测定	Plastics--Determination of compressive elastic modulus	EQV ΓOST 9550-81
83.180	B70	GB/T 14732-1993	木材工业胶粘剂用脲醛、酚醛、三聚氰胺甲醛树脂	Wood adhesives--urea-formaldehyde,phenol-formaldehyde and melamine-formaldehyde resins	NEQ JIS K6800; NEQ BS 1203-79
83.040.10	B72	GB/T 14795-1993	天然生胶术语	Terminology of raw natural rubber
83.040.10	B72	GB/T 14796-1993	天然生胶 颜色指数测定法	Raw natural rubber--Colour index test	EQV ISO 4660-91
83.040.10	B72	GB/T 14797.1-1993	浓缩天然胶乳 硫化胶乳	Natural rubber latex concentrate--Prevulcanized rubber latex
83.040.10	B72	GB/T 14797.2-1993	浓缩天然胶乳 硫化胶乳 粘度的测定	Natural rubber latex concentrate--Prevulcanized rubber latex--Determination of viscosity	NEQ ISO 1652-85
83.040.10	B72	GB/T 14797.3-1993	浓缩天然胶乳 硫化胶乳 溶胀度的测定	Natural rubber latex concentrate--Prevulcanized rubber latex--Determination of swelling capacity
83.160.30	G41	GB/T 14828-1993	农业轮胎牵引性能试验方法	Testing methods of traction performance for agricultural tyres
83.040.10	G44	GB/T 14831-1993	胶乳制品蒸汽老化试验方法	Rubber latex products--Test method for resistance to steam ageing
83.060	G40	GB/T 14832-1993	橡胶材料与液压流体的相容性试验	Test of compatibility between rubber material and hydraulic fluid	NEQ ISO 6072-86
83.060	G40	GB/T 14834-1993	硫化橡胶与金属粘附性及对金属腐蚀作用的测定	Rubber, vulcanized--Determination of adhesion to, and corrosion of metals	EQV ISO 6505-84
83.060	G40	GB/T 14835-1993	硫化橡胶在玻璃下耐阳光曝露试验方法	Rubber,vulcanized--Test method of exposure for resistance daylight under glass	NEQ ISO 4665/2-85
83.060	G40	GB/T 14836-1993	硫化橡胶灰分的定性分析	Vulcanized rubber--Qualitative analysis of ash
83.140	G40	GB/T 14837-1993	橡胶及橡胶制品组分含量的测定 热重分析法	Rubber and rubber products--Determination of composition by thermogravimetry	NEQ ISO/DIS 9924-92
83.140	G40	GB/T 14838-1993	橡胶与橡胶制品 试验方法标准 精密度的确定	Rubber and rubber products--Determination of precision for test method standards	NEQ ISO/TR 9272-86
83.040.20	G49	GB/T 14853.1-1993	橡胶用造粒炭�K倾注密度的测定	Rubber compounding ingredients--Carbon black, pelletized--Determination of pour density	EQV ISO 1306-87
83.040.20	G49	GB/T 14853.2-1993	橡胶用造粒炭�K细粉含量的测定	Rubber compounding ingredients--Carbon black, pelletized--Determination of fines content	EQV ISO 1435-88
83.040.20	G49	GB/T 14853.3-1993	橡胶用造粒炭�K粒子磨损量的测定	Rubber compounding ingredients--Carbon black, pelletized--Determination of pellet atrition	NEQ ASTM D4324-90
83.040.20	G49	GB/T 14853.4-1993	橡胶用造粒炭�K堆积强度的测定	Rubber compounding ingredients--Carbon black, pelletized--Determination of mass strength	NEQ ASTM D1937-89
83.040.20	G49	GB/T 14853.5-1993	橡胶用造粒炭�K粒子尺寸分布的测定	Rubber compounding ingredients--Carbon black, pelletized--Determination of pellet size	EQV ISO 8511-87
83.040.20	G49	GB/T 14853.6-1993	橡胶用造粒炭�K单个粒子破碎强度的测定	Rubber compounding ingredients--Carbon black, pelletized--Determination of individual pellet crushing strength	NEQ ISO 8942-88
83.040.20	G49	GB/T 14853.7-1994	橡胶用造粒炭�K技术条件	Rubber compounding ingredient--Carbon black, pelletized--Specification	NEQ ASTM D1765-91
83.180	G38	GB/T 14903-1994	无机胶粘剂套接扭转剪切强度试验方法	Testing method for torsional shear strength of doedl joint by inorganic adhesives
83.080	C53	GB/T 14966-1994	尼龙6树脂及成型品中己内酰胺卫生标准的分析方法	Method for analysis of 6-caprolactam in nylon 6 resin and its products
ICS 国際規格分類	中国標準分類	規格番号	規格名称(中国語)	規格名称(英語)	国際整合
83.080	G32	GB/T 15047-1994	塑料扭转刚性试验方法	Test method for stiffness proporties in torsion of plastics	NEQ ASTM D1043-87
83.100	G32	GB/T 15048-1994	硬质泡沫塑料压缩蠕变试验方法	Cellular plastics, rigid--Determination of compressive creep	IDT ISO 7850-86
83.140	Y28	GB 15065-1994	电线电缆用�K色聚乙烯塑料	Black polyethylene compounds for wire and cable	NEQ IEC 60502-83
83.080	G17	GB/T 15182-1994	线型低密度聚乙烯树脂	Linear low density polyethylene resin
83.060	G40	GB/T 15251-1994	橡胶 游离硫的测定 铜螺旋法	Rubber--Determination of free sulphur--Copper spiral method	EQV ISO 7269-87
83.060	G40	GB/T 15252-1994	橡胶中硫化物型硫含量的测定 碘量法	Rubber--Determination of sulfide sulfur content--Lodometric method	EQV ISO 8054-88
83.060	G40	GB/T 15253-1994	橡胶 游离硫的测定 电位滴定法	Rubber--Determination of free Sulpher--Potentiometic titration method	NEQ ISO/DP SAM-83
83.060	G40	GB/T 15254-1994	硫化橡胶与金属粘接180°剥离试验	Rubber, vulcanized--Determination of adhesion to metal--180°Peel test method	EQV ISO 8510-2-90
83.060	G40	GB/T 15255-1994	硫化橡胶人工气候老化(碳弧灯)试验方法	Rubber, vulcanized--Test method for artifical weathering(carbon-arc lamp)	NEQ ASTM D750-85
83.060	G40	GB/T 15256-1994	硫化橡胶低温脆性的测定(多试样法)	Rubber, vulcanized--Determination of low-temperature brittleness(multiple test piece method)	EQV ISO 812-91
83.060	G35	GB/T 15257-1994	混合调节型氯丁橡胶 CR321、CR322	Mixed modulation chloroprene rubber CR321,CR322
83.140	G33	GB/T 15267-1994	食品包装用聚氯乙烯硬片、膜	Rigid polyvinyl chloride sheet and film for foodstuff packing	NEQ JIS K6734-75(83)
83.160.20	G41	GB 15323-1994	航空轮体内原	Inner tube for pneumatic tyre of aircraft
83.160.20	G41	GB/T 15324-1994	航空轮胎内胎物理性能试验方法	The physical properties test method for inner tube of aircraft tyre	NEQ MIU-1-5014F
83.180	G38	GB/T 15332-1994	热熔胶粘剂软化点的测定 环球法	Determination of the softening point of hot-melt adhesives Ball and ring method	NEQ NF T76-106-81
83.040.20	G49	GB/T 15338-1994	炭�K试验方法精密度和偏差的确认	Standard guide for carbon black--Validation of test method precision and bias	EQV ASTM D4821-92
83.040.20	G49	GB/T 15339-1994	炭�K在丁腈橡胶中配方及鉴定方法	Carbon black in NBR (acrylonitrile-butadiene rubber)--Recipe and evaluation method	NEQ ASTM D3187-90
83.040.10	G40	GB/T 15340-1994	天然、合成生胶取样及制样方法	Rubber, raw, natural and synthetic sampling and further preparative procedures	IDT ISO 1795-92
83.140.10?	L90	GB/T 15429-1995	电子设备用复塑铝板	Aluminium plate clad with plastics for electronic equipments	NEQ JIS K6744-86
83.060	G40	GB/T 15584-1995	硫化橡胶在屈挠试验中温升和耐疲劳性能的测定 第一部分:基本原理	Rubber, vulcanized--Determination of temperature rise and resistance to fatigue in flexometer testing--Part 1: Basic principles	EQV ISO 4666/1-1982
83.080.01?	G32	GB/T 15596-1995	塑料暴露于玻璃下日光或自然气候或人工光后颜色和性能变化的测定	Plastics--Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or artificial light	EQV ISO 4582-1980
83.?	G32	GB/T 15597-1995	聚甲基丙烯酸甲酯(PMMA)模塑材料	Polymethyl methacrylate (PMMA) moulding materials	NEQ JIS K6717-89【旧版】
83.080?	G32	GB/T 15598-1995	塑料剪切强度试验方法 穿孔法	Testing methods for shear strength of plastics by punch tool	NEQ JIS K7214-85
83.080.01?	C82	GB/T 15662-1995	导电、防静电塑料体积电阻率测试方法	Method of testing volume resistivity of conducting and antistatic plastics	NEQ ISO 3915-1981
83.120	Q23	GB/T 15738-1995	导电和抗静电纤维��强塑料电阻率试验方法	Test method of resistivity for fibre reinforced conducting and antistatic plastics	EQV ISO 3915-1981
83.180	G38	GB/T 15903-1995	压敏胶粘带耐燃性试验方法 悬挂法	Test method for flame resistance of pressure--sensitive adhesive tapes	EQV ISO 5954-1989
83.060	G40	GB/T 15904-1995	橡胶中聚异戊二烯含量的测定	Rubber--Determination of polyisoprene content	EQV ISO 5954-1989
83.060	G40	GB/T 15905-1995	硫化橡胶湿热老化试验方法	Rubber, vulcanized--Test method of damp heat aging	NEQ ISO 4611-1987
83.060	G40	GB/T 15906-1995	橡胶中丁基橡胶或聚异丁烯含量的测定	Rubber--Determination of isoprene--isobutylene rubber or poly isobutylene content	EQV DIN 5361-77
83.120	Q23	GB/T 15928-1995	不饱和聚酯树酯��强塑料中残留苯乙烯单体含量测定方法	Determination method of residual styrene monomer contents in reinforced plastics based on unsaturated polyester	EQV ISO 4901-85
83.140	G31	GB/T 16276-1996	塑料薄膜粘连性试验方法	Test method for blocking of plastic film	NEQ ASTM D 1893-1985
83.120	Q23	GB 16413-1996	煤矿井下用玻璃钢制品安全性能检验规范	Test of glass fiber reinforced plastic product safety property for coal mining
83.080	G31	GB/T 16419-1996	塑料弯曲性能小试样试验方法	Plastics--Determination of flexural properties by use of small specimens
83.080	G31	GB/T 16420-1996	塑料冲击性能小试样试验方法	Plastics--Determination of impact properties by use of small specimens
83.080	G31	GB/T 16421-1996	塑料拉伸性能小试样试验方法	Plastics--Determination of tensile properties by use of small specimens
83.080	G31	GB/T 16422.1-1996	塑料实验室光源曝露试验方法 第1部分:通则	Plastics--Methods of exposure to laboratory light sources--Part 1: General guidance	EQV ISO 4892.1-1994
83.080.01	G31	GB/T 16422.2-1999	塑料实验室光源暴露试验方法 第2部分: 氙弧灯	Plastics--Methods of exposure to laboratory light sources--Part 2: Xenon--arc sources	IDT ISO 4892-2:1994
83.080.01	G31	GB/T 16422.3-1997	塑料实验室光源暴露试验方法 第3部分: 荧光紫外灯	Plastics--Methods of exposure to laboratory light sources--Part 3: Fluorescent UV lamps	EQV ISO 4892-3:1994
83.080	G31	GB/T 16422.4-1996	塑料实验室光源曝露试验方法 第4部分:开放式碳弧灯	Plastics--Methods of exposure to laboratory light sources--Part 4: Open flame carbon arc lamp	EQV ISO 4892.4-1994
83.140.10	G31	GB/T 16578-1996	塑料薄膜和薄片耐撕裂性能试验方法 裤形撕裂法	Plastics--Film and sheeting--Determination of tear resistance--Trouser tear method	EQV ISO 6383-1-1983
83.080.10	G32	GB/T 16579-1996	D001大孔强酸性苯乙烯系阳离子交换树脂	D001 macrporous strongly acidic styrene type cation exchange resins
83.080.10	G32	GB/T 16580-1996	D201大孔强碱性苯乙烯系阴离子交换对脂	D201 macroporous strongly basic styrene type anion exchange resins
83.080.01	G31	GB/T 16582-1996	部分结晶聚合物熔点试验方法 毛细管法	Determination of melting point of semi-crystalline polymers--Capillary tube method	EQV ISO 3146-1985(A法)
83.060	G40	GB/T 16583-1996	不饱和橡胶中饱和橡胶的鉴定 第一部分 酸消化法	Rubbers saturated--Identification in unsaturated rubbers--Part 1: by acid digestion	NEQ ISO/DP 7234-1-1980
83.060	G40	GB/T 16584-1996	橡胶 用无转子硫化仪测定硫化特性	Rubber--Measurement of vulcanization characteristics with rotorless curemeters	EQV ISO 6502-1991
83.060	G40	GB/T 16585-1996	硫化橡胶人工气候老化(荧光紫外灯)试验方法	Rubber,vulcanized--Test method of resistance to artificial weathering (Fluorescent UV lamp)	EQV ASTM G 53-1988
83.060	G40	GB/T 16586-1996	硫化橡胶与钢丝帘线粘合强度的测定	Rubber,vulcanized--Determination of adhesion to wire cord	IDT ISO 5603-1986
83.040	G40	GB/T 16589-1996	硫化橡胶分类 橡胶材料	Rubber, vulcanized--Classification--Rubber materials	EQV ISO/TR 8461-1984
83.140.40	G42	GB/T 16590.1-1996	消防用不可折叠型橡胶和塑料软管 第1部分: 定位应急设施用轴卷半硬性软管	Rubber and plastics hoses, non-collapsible, for fire-fighting service--Part 1: Semi-rigid reel hose for fixed first-aid installations	EQV ISO/DIS 4642-1-1994
83.140.40	G42	GB/T 16591-1996	输送无水氨用橡胶软管及软管组合件	Rubber hose and hose assemblies for transferring anhydrous ammonia	EQV ISO 5771-1994
83.140.50	G40	GB/T 16593-1996	旋转轴唇形密封圈术语	Rotary shaft lip type seals--Vocabulary	IDT ISO 6194/2-1919
83.080.01	G32	GB/T 16613-1996	试验用聚氯乙烯(PVC)糊的制备 分散器法	Preparation of polyvinyl chloride (PVC) pastes for test purposes--Dissolver method	IDT ISO/DIS 11468-1995
83.160	G41	GB/T 16622-1996	压配式实心轮胎系列	Series of pressed-on solid tyres
83.160	G41	GB/T 16623-1996	压配式实心轮胎	Pressed-on solid tyres
83.040	G32	GB/T 16867-1997	聚苯乙烯和丙烯腈-丁二烯-苯乙烯树脂中残留苯乙烯单体的测定 气相色谱法	Determination of residual styrene monomer in polystyrene and acrylonitrile-butadiene-styrene resins by gas chromatography	NEQ ASTM D4384-84(1989)
83.140.01	G40	GB/T 16996-1997	硫化橡胶暴露于自然气候或人工光后性能变化的评定	Rubber,vulcanized--Assessment of changes in properties after exposure to natural weathering or artificial light	EQV ISO 4665-1:1985
83.180	G38	GB/T 16997-1997	胶粘剂 主要破坏类型的表示法	Adhesives--Designation of main failture patterns	IDT ISO 10365:1992
83.180	G38	GB/T 16998-1997	热熔胶粘剂热稳定性测定	Hot-melt adhesives--Determination of thermal stability	EQV ISO 10363:1992
ICS 国際規格分類	中国標準分類	規格番号	規格名称(中国語)	規格名称(英語)	国際整合
83.080.20	G31	GB/T 17037.1-1997	热塑性塑料材料注塑试样的制备 第1部分: 一般原理及多用途试样和长条试样的制备	Injection moulding of test specimens of thermoplastic materails--Part 1: General principles and moulding of multipurpose and bar test specimens	IDT ISO 294-1:1996
83.160.20	G41	GB/T 17042-1997	航空轮胎胎圈耐高温试验方法	Test method of resisting high temperature for bead base of aircraft tyre	EQV TSO-C62d:1990
83.160.20	G41	GB/T 17043-1997	航空轮胎环境温度试验方法	Test method of environmental temperature for aircraft tyre	EQV TSO-C62d:1990
83.140	C53	GB 17326-1998	食品容器、包装材料用橡胶改性的丙烯腈-丁二烯-苯乙烯成型品卫生标准	Hygienic standard for rubber--modified acrylonitrile--butadiene--styren products used as food containers and packaing materials
83.140	C53	GB 17327-1998	食品容器、包装材料用丙烯腈-苯乙烯成型品卫生标准	Hygienic staudard for acrylonitrile--styrene products used as food containers and packaing materials
83.080.01	G33	GB/T 17391-1998	聚乙烯管材与管件热稳定性试验方法	Test method for thermal stability of polyethylene pipes and fittings	EQV ISO/TR 10837:1991
83.140.01	G42	GB/T 17516.1-1998	V带和多楔带传动 测定节面位置的动态试验方法 第1部分: V带	V-and ribbed belt drives--Dynamic test to determine pitch zone location--Part 1: V-belts	IDT ISO 8370-1:1993
83.140.01	G42	GB/T 17516.2-1998	V带和多楔带传动 测定节面位置的动态试验方法 第2部分: 多楔带	V-and ribbed belt drives--Dynamic test to determine pitch zone location--Part 2: V-ribbed belts	IDT ISO 8370-2:1993
83.180	G38	GB/T 17517-1998	胶粘剂压缩剪切强度试验方法 木材与木材	Adhesives-Wood to wood adhesive bonds-Determination of shear strength by compression loading	EQV ISO 6238-1987(E)
83.140	G40	GB/T 17531-1998	橡胶与橡胶制品 化学试验方法准确度和偏差的确定	Rubber and rubber products--Determination of accuracy and bias of Chemical test methods	IDT ISO/TR 9474:1993
83.040.01	G31	GB/T 17603-1998	光解性塑料户外暴露试验方法	Method for outdoor exposure testing of photodegradable plastics	EQV ASTM D 5272-92
83.140.10	G33	GB/T 17643-1998	土工合成材料 聚乙烯土工膜	Polyethylene geomembrane
83.140.10	G33	GB/T 17688-1999	土工合成材料 聚氯乙烯土工膜	Geosynthetics--Polyvinyl chloride geomembrane
83.140.10	G33	GB/T 17689-1999	土工合成材料 塑料土工格栅	Geosynthetics--Plastic geogrid	NEQ GRI GG1:1987
83.140.10	G33	GB/T 17690-1999	土工合成材料 塑料扁丝编织土工布	Geosynthetics--Plastic woven film yarn geotextile
83.060	G40	GB/T 17782-1999	硫化橡胶压力空气热老化试验方法	Rubber,vulcanized--Test method of aging by heat and air pressure	EQV ASTM D454:1988
83.060	G40	GB/T 17783-1999	硫化橡胶样品和试样的制备 化学试验	Rubber, vulcanized--Preparation of samples and test pieces--Chemical tests	IDT ISO 4661-2:1987
83.040.10	B72	GB/T 17821-1999	胶乳 5℃至40℃密度的测定	Rubber latex--Determination of density between 5℃ and 40℃	IDT ISO 705:1994
83.180	G38	GB/T 17875-1999	压敏胶粘带加速老化试验方法	Practice for accelerated aging of pressure-sensitive tapes	EQV ASTM D3611:1989
83.040.10	B72	GB/T 18011-1999	浓缩天然胶乳 干胶膜制备	Natural rubber latex concentrate--Preparation of dry films	IDT ISO 498:1992
83.040	B72	GB/T 18012-1999	天然胶乳 pH的测定	Natural latex-Determination of pH	NEQ ISO 976:1996
83.040.10	B72	GB/T 18013-1999	天然生胶 加速贮存硬化值的测定	Raw natural rubber--Determination of accelerated storage--Hardening number	NEQ SMR7:1992
83.040.10	G34	GB/T 18118-2000	合成生胶中防老剂含量的测定 高效液相色谱法	Rubber,raw synthetic--Determination of anti-degradants by high-performance liquid chromatography	IDT ISO 11089:1997
83.140.01	G47	GB 18173.1-2000	高分子防水材料 第1部分: 片材	Polymer water-proof materials Part 1: Water-proof sheet	EQV JIS A 6008:1997
83.140.01	G47	GB 18173.2-2000	高分子防水材料 第2部分: 止水带	Polymer water-proof materials Part 2: Waterstop	EQV DIN 7865/2:1982
83.060	G40	GB/T 18174-2000	橡胶中二氧化硅含量的测定	Rubber--Determination of silicon dioxide content	NEQ ASTM D 297:1993
83.140.01	G42	GB/T 18183-2000	汽车同步带疲劳试验方法	Automotive synchronous belt industry-fatigue test	EQV ISO 10917:1995
83.140.99	G40	GB 18241.1-2001	橡胶衬里 第一部分: 设备防腐衬里	Rubber lining Part 1: Anticorrosion lining for equipment
83.140.99	G40	GB/T 18241.2-2000	橡胶衬里 第二部分 磨机衬里	Rubber lining Part 2: Lining for grinding mills
83.140.99	G40	GB/T 18241.3-2000	橡胶衬里 第三部分: 浮选机衬里	Rubber Lining Part 3: Lining for floatation machine
83.140.30	G33	GB/T 18251-2000	聚烯烃管材、管件和混配料中颜料或炭�K分散的测定方法	Method for the assessment of pigment or carbon black dispersion in polyolefin pipes,fittings and compounds	NEQ ISO/DIS 18553:1999
83.140.30	G33	GB/T 18252-2000	塑料管道系统 用外推法对热塑性塑料管材长期静液压强度的测定	Plastics piping and ducting systems--Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
83.040.10	B72	GB/T 18396-2001	天然胶乳 环法测定表面张力	Natural latex--Determination of surface tension by the ring method	EQV ISO 1409:1995
83.140.30	G33	GB/T 18477-2001	埋地排水用硬聚氯乙烯(PVC-U)双壁波纹管材	Unplasticized polyvinyl chloride(PVC-U) double wall corrugated pipes for underground soil,waste and drainage	NEQ CEN 155N
83.160.01	G41	GB/T 18505-2001	汽车轮胎动平衡试验方法	Dynamic balance test method for motor vehicle tyres
83.160.01	G41	GB/T 18506-2001	汽车轮胎均�艶ｫ试验方法	Uniformity test method for motor vehicle tyres	NEQ ISO 13326:1998
83.180	G38	GB 18583-2001	室内装饰装修材料 胶粘剂中有害物质限量	Indoor decorating and refurbishing materials--Limit of harmful substances of adhesives
83.140	Y28	GB 18586-2001	室内装饰装修材料 聚氯乙烯卷材料地板中有害物质限量	Indoor decorating and refurbishing materials--Limit of harmful substances of polyvinyl chloride floor coverings
ICS 国際規格分類	中国標準分類	規格番号	規格名称(中国語)	規格名称(英語)	国際整合

ご意見、ご要望、ご質問 は、
h_ishiguro@mue.biglobe.ne.jp