中国国家標準(GB,GB/T規格)
ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) | 国際整合 |
---|---|---|---|---|---|
77.140.01 | H40 | GB/T 221-2000 | 钢铁产品牌号表示方法 | Notations for designations of iron and steel | |
77.080.20 | H11 | GB/T 222-1984 | 钢的化学分析用试样取样法及成品化学成分允许偏差 | Method of sampling steel for determination of chemical composition and permissible variations for product analysis | |
77.080 | H11 | GB/T 223.1-1981 | 钢铁及合金中碳量的测定 | Determination of carbon content in iron, steel and alloy | |
77.080 | H11 | GB/T 223.2-1981 | 钢铁及合金中硫量的测定 | Determination of sulphur content in iron, steel and alloy | |
77.080 | H11 | GB/T 223.3-1988 | 钢铁及合金化学分析方法 二安替比林甲烷磷钼酸重量法测定磷量 | Methods for chemical analysis of iron, steel and alloy--The diantipyryl methane phosphomolybdate gravimetric method for the determination of phosphorus content | NEQ ASTM E30-80 |
77.080 | H11 | GB/T 223.4-1988 | 钢铁及合金化学分析方法 硝酸铵氧化容量法测定锰量 | Methods for chemical analysis of iron, steel and alloy The volumetric method for determination of manganese content by ammonium nitrate oxidation | |
77.080 | H11 | GB/T 223.5-1997 | 钢铁及合金化学分析方法 还原型硅钼酸盐光度法测定酸溶硅含量 | Methods for chemical analysis of iron,steel and alloy The reduced molybdosilicate spectro photometric method for the determination of acid-soluble silicon content | |
77.080 | H11 | GB/T 223.6-1994 | 钢铁及合金化学分析方法 中和滴定法测定硼量 | Methods for chemical analysis of iron, steel and alloy--The neutralization titrimetric method for the determination of boron content | NEQ JIS G1227-86 |
77.080 | H11 | GB/T 223.7-1981 | 合金及铁粉中铁量的测定 | Determination of iron content in alloy and powder | |
77.040.30 | H11 | GB/T 223.8-2000 | 钢铁及合金化学分析方法 氟化钠分离-EDTA滴定法测定铝含量 | Methods for chemical analysis of iron,steel and alloy The sodium fluoride separation--EDTA titration method for the determination of aluminium content | |
77.040.30 | H11 | GB/T 223.9-2000 | 钢铁及合金化学分析方法 铬天青S光度法测定铝含量 | Methods for chemical analysis of iron,steel and alloy The chrom azurol S photometric method for the determination of aluminium content | |
77.080 | H11 | GB/T 223.11-1991 | 钢铁及合金化学分析方法 过硫酸铵氧化容量法测定铬量 | Methods for chemical analysis of iron, steel and alloy?The ammonium persulfate oxidation volumetric method for the determination of chromium content | |
77.080 | H11 | GB/T 223.12-1991 | 钢铁及合金化学分析方法 碳酸钠分离- 二苯碳酰二肼光度法测定铬量 | Methods for chemical analysis of iron, steel and alloy - The sodium carbonate separation-diphenyl carbazide photometric method for the determination of chromium content | |
77.040.30 | H11 | GB/T 223.13-2000 | 钢铁及合金化学分析方法 硫酸亚铁铵滴定法测定钒含量 | Methods for chemical analysis of iron,steel and alloy The ammonium ferrous sulfate titration method for the determination of vanadium content | |
77.040.30 | H11 | GB/T 223.14-2000 | 钢铁及合金化学分析方法 钽试剂萃取光度法测定钒含量 | Methods for chemical analysis of iron,steel and alloy The N-benzoy-N-phenylhydroxylamine extraction photometric method for the determination of vanadium content | |
77.080 | H11 | GB/T 223.15-1982 | 钢铁及合金化学分析方法 重量法测定钛 | Chemical analysis of iron,steel and alloy?The determination of titanium by gravimetric method | |
77.080 | H11 | GB/T 223.16-1991 | 钢铁及合金化学分析方法 变色酸光度法测定钛量 | Methods for chemical analysis of iron, steel and alloy?The chromotropic acid photometric method for the determination of titanium content | |
77.080 | H11 | GB/T 223.17-1989 | 钢铁及合金化学分析方法 二安替比林甲烷光度法测定钛量 | Methods for chemical analysis of iron, steel and alloy - The diantipyrylmethane photometric method for the determination of titanium content | NEQ JIS G1223-81 |
77.080 | H11 | GB/T 223.18-1994 | 钢铁及合金化学分析方法 硫代硫酸钠分离- 碘量法测定铜量 | Methods for chemical analysis of iron, steel and alloy - The sodium thiosulfate separation iodimetric method for the determination of cupper content | |
77.080 | H11 | GB/T 223.19-1989 | 钢铁及合金化学分析方法 新亚铜灵 -三氯甲烷萃取光度法测定铜量 | Methods for chemical analysis of iron, steel and alloy - The neocuproine-chloroform extraction photometric method for the determination of copper content | NEQ JIS G1219-81 |
77.080 | H11 | GB/T 223.20-1994 | 钢铁及合金化学分析方法 电位滴定法测定钴量 | Methods for chemical analysis of iron, steel and alloy - The fotentiometric titration method for the determination of cobalt content | |
77.080 | H11 | GB/T 223.21-1994 | 钢铁及合金化学分析方法 5-Cl-PADAB分光光度法测定钴量 | Methods for chemical analysis of iron, steel and alloy - The 5-Cl-PADAB spectrophotometric method for the determination of cobalt content | |
77.080 | H11 | GB/T 223.22-1994 | 钢铁及合金化学分析方法 亚硝基R 盐分光光度法测定钴量 | Methods for chemical analysis of iron, steel and alloy - The nitroso-R-salt spectrophotometric method for the determination of cobalt content | |
77.080 | H11 | GB/T 223.23-1994 | 钢铁及合金化学分析方法 丁二酮肟分光光度法测定镍量 | Methods for chemical analysis of iron, steel and alloy - The dimethylglyoxime spectrophotometric method for the determination of nickel content | |
77.080 | H11 | GB/T 223.24-1994 | 钢铁及合金化学分析方法 萃取分离- 丁二酮肟分光光度法测定镍量 | Methods for chemical analysis of iron, steel and alloy - The extraction separation--the dimethylglyoxime spectrophotometric method for the determination of nickel content | |
77.080 | H11 | GB/T 223.25-1994 | 钢铁及合金化学分析方法 丁二酮肟重量法测定镍量 | Methods for chemical analysis of iron, steel and alloy - The dimethylglyoxime gravimetric method for the determination of nickel content | |
77.080 | H11 | GB/T 223.26-1989 | 钢铁及合金化学分析方法 硫氰酸盐直接光度法测定钼量 | Methods for chemical analysis of iron, steel and alloy - The thiocyanate direct photometric method for the determination of molybdenum content | NEQ JIS G1218-81 |
77.080 | H11 | GB/T 223.27-1994 | 钢铁及合金化学分析方法 硫氰酸盐-乙酸丁酯萃取分光光度法测定钼量 | Methods for chemical analysis of iron, steel and alloy - The thiocyanate-butyl acetate extraction spectrophotometric method for the determination of molybdenum content | |
77.080 | H11 | GB/T 223.28-1989 | 钢铁及合金化学分析方法 α-安息香肟重量法测定钼量 | Methods for chemical analysis of iron, steel and alloy - The α-benzoinoxime gravimetric method for the determination of molybdenum content | NEQ JIS G1218-81 |
77.080 | H11 | GB/T 223.29-1984 | 钢铁及合金化学分析方法 载体沉淀-二甲酚橙光度法测定铅量 | Methods for chemical analysis of iron, steel and alloy--The xylenol orange photometric method for determina tion of lead content after carrier precipitation | |
77.080 | H11 | GB/T 223.30-1994 | 钢铁及合金化学分析方法 对-溴苦杏仁酸沉淀分离- 偶氮胂V分光光度法测定锆量 | Methods for chemical analysis of iron, steel and alloy - The arsenazo V spectrophotometric method for the determination of zirconium content after separation by p-bromomandelic acid | NEQ GOST 12365-84 |
77.080 | H11 | GB/T 223.31-1994 | 钢铁及合金化学分析方法 蒸馏分离-钼蓝分光光度法测定砷量 | Methods for chemical analysis of iron, steel and alloy - The distillation-molybdenum blue spectrophotometric method for the determination of arsenic content | |
77.080 | H11 | GB/T 223.32-1994 | 钢铁及合金化学分析方法 次磷酸钠还原-碘量法测定砷量 | Methods for chemical analysis of iron, steel and alloy - The hypophosphite reduction-iodimetric method for the determination of arsenic content | |
77.080 | H11 | GB/T 223.33-1994 | 钢铁及合金化学分析方法 萃取分离- 偶氮氯膦mA光度法测定铈量 | Methods for chemical analysis of iron, steel and alloy - The chlorophosphonago mA photometric method for the determination of cerium content after extraction separation | |
77.080 | H11 | GB/T 223.34-2000 | 钢铁及合金化学分析方法 铁粉中盐酸不溶物的测定 | Methods for chemical analysis of iron,steel and alloy The determination of hydrochloric acid-insoluble content of iron powders | |
77.080 | H11 | GB/T 223.35-1985 | 钢铁及合金化学分析方法 脉冲加热惰气熔融库仑滴定法测定氧量 | Methods for chemical analysis of iron, steel and alloy--The pulse heating inert gas fusion-coulometric titration method for the determination of oxygen content | |
77.080 | H11 | GB/T 223.36-1994 | 钢铁及合金化学分析方法 蒸馏分离- 中和滴定法测定氮量 | Methods for chemical analysis of iron, steel and alloy The neutral titration method for the determination of nitrogen content after distillation separation | |
77.080 | H11 | GB/T 223.37-1989 | 钢铁及合金化学分析方法 蒸馏分离- 靛酚蓝光度法测定氮量 | Methods for chemical analysis of iron, steel and alloy--The indophenol blue photometric method for the determination of nitrogen content after distillation seperation | NEQ JIS G1228-81 |
77.080 | H11 | GB/T 223.38-1985 | 钢铁及合金化学分析方法 离子交换分离- 重量法测定铌量 | Methods for chemical analysis of iron, steel and alloy--The anion-exchange separation-gravimetric method for the determination of niobium content | |
77.080 | H11 | GB/T 223.40-1985 | 钢铁及合金化学分析方法 离子交换分离- 氯磺酚S 光度法测定铌量 | Methods for chemical analysis of iron, steel and alloy--The anion-exchange separation-sulphochlorophenol S photometric method for the determination of niobium content | |
77.080 | H11 | GB/T 223.41-1985 | 钢铁及合金化学分析方法 离子交换分离-连苯三酚光度法测定钽量 | Methods for chemical analysis of iron, steel and alloy--The anion-exchange separation-pyrogallol photometric method for the determination of tantalum content | |
77.080 | H11 | GB/T 223.42-1985 | 钢铁及合金化学分析方法 离子交换分离-溴邻苯三酚红光度法测定钽量 | Methods for chemical analysis of iron, steel and alloy--The anion-exchange separation-bromopyrogallol red photometric method for the determination of of tantalum content | |
77.080 | H11 | GB/T 223.43-1994 | 钢铁及合金化学分析方法 钨量的测定 | Methods for chemical analysis of iron, steel and alloy - Determination of tungsten content | NEQ JIS G1220-86 |
77.080 | H11 | GB/T 223.45-1994 | 钢铁及合金化学分析方法 铜试剂分离- 二甲苯胺蓝U光度法测定镁量 | Methods for chemical analysis of iron, steel and alloy - The cupral separation-xylidyl blue Uphotometric method for the determination of magnesium content | |
77.080 | H11 | GB/T 223.46-1989 | 钢铁及合金化学分析方法 火焰原子吸收光谱法测定镁量 | Methods for chemical analysis of iron, steel and alloy - The flame atomic absorption spectrometric method for the determination of magnesium content | |
77.080 | H11 | GB/T 223.47-1994 | 钢铁及合金化学分析方法 载体沉淀- 钼蓝光度法测定锑量 | Methods for chemical analysis of iron, steel and alloy - The carrier precipitation-molybdenum blue potometric method for the determination of antimony content | |
77.080 | H11 | GB/T 223.48-1985 | 钢铁及合金化学分析方法 半二甲酚橙光度法测定铋量 | Methods for chemical analysis of iron, steel and alloy--The semixylenol orange photometric method for the determination of bismuth content | |
77.080 | H11 | GB/T 223.49-1994 | 钢铁及合金化学分析方法 萃取分离- 偶氮氯膦mA分光光度法测定稀土总量 | Methods for chemical analysis of iron, steel and alloy - Extraction separation-chlorophosphonazo mA spectrophotometric method for the determination of the total rare earth content | |
77.080 | H11 | GB/T 223.50-1994 | 钢铁及合金化学分析方法 苯基荧光酮- 溴化十六烷基三甲基胺直接光度法测定锡量 | Methods for chemical analysis of iron, steel and alloy - The phenylfluorone-CTMAB direct photometric method for the defermination of tin content | |
77.080 | H11 | GB/T 223.51-1987 | 钢铁及合金化学分析方法 5-Br-PADAP 光度法测定锌量 | Methods for chemical analysis of iron, steel and alloy--The 2-(5-Bromo-2-pyridylazo)-5-diethylaminophenol photometric method for the determination of zinc content | NEQ ΓOCT 12362-79 |
77.080 | H11 | GB/T 223.52-1987 | 钢铁及合金化学分析方法 盐酸羟胺- 碘量法测定硒量 | Methods for chemical analysis of iron, steel and alloy--The hydroxylamine hydrochloride-iodometric method for the determination of selenium content | NEQ ASTM E30-82 |
77.080 | H11 | GB/T 223.53-1987 | 钢铁及合金化学分析方法 火焰原子吸收分光光度法测定铜量 | Methods for chemical analysis of iron, steel and alloy--The flame atomic absorption spectrophotometric method for the determination of copper content | EQV ISO/DIS 4943 |
77.080 | H11 | GB/T 223.54-1987 | 钢铁及合金化学分析方法 火焰原子吸收分光光度法测定镍量 | Methods for chemical analysis of iron, steel and alloy--The flame atomic absorption spectrophotometric method for the determination of nickel content | EQV ISO/DIS 4940 |
77.080 | H11 | GB/T 223.55-1987 | 钢铁及合金化学分析方法 示波极谱( 直接 )法测定碲量 | Methods for chemical analysis of iron, steel and alloy--The direct oscill opolarographic method for the determination of tellerium content | NEQ JIS G1234-81 |
77.080 | H11 | GB/T 223.56-1987 | 钢铁及合金化学分析方法 巯基棉分离- 示波极谱法测定碲量 | Methods for chemical analysis of iron, steel and alloy--The sulfhydryl cotton fiber separation-oscillopolarographic method for the determination of tellurium content | NEQ JIS G1234-81 |
77.080 | H11 | GB/T 223.57-1987 | 钢铁及合金化学分析方法 萃取分离-吸附催化极谱法测定镉量 | Methods for chemical analysis of iron, steel and alloy--The extraction-absorption catalytic polarographic method for the determination of cadmium content | NEQ ΓOCT 16362-79 |
77.080 | H11 | GB/T 223.58-1987 | 钢铁及合金化学分析方法 亚砷酸钠-亚硝酸钠滴定法测定锰量 | Methods for chemical analysis of iron, steel and alloy--The extraction-absorption catalytic polarographic method for the determination of manganese content | |
77.080 | H11 | GB/T 223.59-1987 | 钢铁及合金化学分析方法 锑磷钼蓝光度法测定磷量 | Methods for chemical analysis of iron, steel and alloy--The sodium arsenite-sodium nitrite titrimetric method for the determination of phosphorus content | NEQ ΓOCT 12347-77 |
77.080 | H11 | GB/T 223.60-1997 | 钢铁及合金化学分析方法 高氯酸脱水重量法测定硅含量 | Methods for chemical analysis of iron,steel and alloy--The perchloric acid dehydration gravimetric method for the determination of silicon content | |
77.080 | H11 | GB/T 223.61-1988 | 钢铁及合金化学分析方法 磷钼酸铵容量法测定磷量 | Methods for chemical analysis of iron, steel and alloy--The ammonium phosphomolybdate volumetric method for the determination of phosphorus content | |
77.080 | H11 | GB/T 223.62-1988 | 钢铁及合金化学分析方法 乙酸丁酯萃取光度法测定磷量 | Methods for chemical analysis of iron, steel and alloy--The butyl acetate extraction photometric method for the determination of phosphorus content | |
77.080 | H11 | GB/T 223.63-1988 | 钢铁及合金化学分析方法 高碘酸钠(钾)光度法测定锰量 | Methods for chemical analysis of iron, steel and alloy--The sodium (potassium) periodate photometric method for the determination of manganese content | NEQ ASTM E350-85 |
77.080 | H11 | GB/T 223.64-1988 | 钢铁及合金化学分析方法 火焰原子吸收光谱法测定锰量 | Methods for chemical analysis of iron, steel and alloy--The flame atomic absorption spectrometric method for the determination of manganese content | EQV JIS G1257-81 |
77.080 | H11 | GB/T 223.65-1988 | 钢铁及合金化学分析方法 火焰原子吸收光谱法测定钴量 | Methods for chemical analysis of iron, steel and alloy--The flame atomic absorption spectrometric method for the determination of cobalt content | EQV JIS G1257-81 |
77.080 | H11 | GB/T 223.66-1989 | 钢铁及合金化学分析方法 硫氰酸盐-盐酸氯丙嗪-三氯甲烷萃取光度法测定钨量 | Methods for chemical analysis of iron, steel and alloy - The thiocyanate chlorpromazine hydrochloride--chloro form extraction photometric method for the determination of tungsten content | |
77.080 | H11 | GB/T 223.67-1989 | 钢铁及合金化学分析方法 还原蒸馏 -次甲基蓝光度法测定硫量 | Methods for chemical analysis of iron, steel and alloy - The reducing distillation-methylene blue photometric method for the determination of sulfur content | NEQ JIS G1215-81 |
77.080 | H11 | GB/T 223.68-1997 | 钢铁及合金化学分析方法 管式炉内燃烧后碘酸钾滴定法测定硫含量 | Methods for chemical analysis of iron,steel and alloy The potassium iodate titration method after combustion in the pipe furnace for the determination of sulfur content | |
77.080 | H11 | GB/T 223.69-1997 | 钢铁及合金化学分析方法 管式炉内燃烧后气体容量法测定碳含量 | Methods for chemical analysis of iron,steel and alloy The gas- volumetric method after combustion in the pipe furnace for the determination of carbon content | |
77.080 | H11 | GB/T 223.70-1989 | 钢铁及合金化学分析方法 邻菲罗啉分光光度法测定铁量 | Methods for chemical analysis of iron, steel and alloy - The o-phenanthroline spectrophotometric method for the determination of iron content | |
77.080 | H11 | GB/T 223.71-1997 | 钢铁及合金化学分析方法 管式炉内燃烧后重量法测定碳含量 | Methods for chemical analysis of iron,steel and alloy The gravimetric method after combustion in the pipe furnace for the determination of carbon content | |
77.080 | H11 | GB/T 223.72-1991 | 钢铁及合金化学分析方法 氧化铝色层分离- 硫酸钡重量法测定硫量 | Methods for chemical analysis of iron, steel and alloy - The alumina chromatographic separation-barium sulfate gravimetric method for the determination of sulphur content | |
77.080 | H11 | GB/T 223.73-1991 | 钢铁及合金化学分析方法 三氯化钛- 重铬酸钾容量法测定铁量 | Methods for chemical analysis of iron, steel and alloy - The titanium trichloride-potassium dichromate volumetric method for the determination of iron content | |
77.080 | H11 | GB/T 223.74-1997 | 钢铁及合金化学分析方法 非化合碳含量的测定 | Methods for chemical analysis of iron,steel and alloy The combustion gravimetric/gas-volumetric method for the determination of non-combined carbon content | |
77.080 | H11 | GB/T 223.75-1991 | 钢铁及合金化学分析方法 甲醇蒸馏- 姜黄素光度法测定硼量 | Methods for chemical analysis of iron, steel and alloy - The methanol distillation-curcumin photometric method for the determination of boron content | |
77.080 | H11 | GB/T 223.76-1994 | 钢铁及合金化学分析方法 火焰原子吸收光谱法测定钒量 | Methods for chemical analysis iron, steel and alloy - The flame atomic absorption spectrometric method for the determination of vanadium content | |
77.080 | H11 | GB/T 223.77-1994 | 钢铁及合金化学分析方法 火焰原子吸收光谱法测定钙量 | Methods for chemical analysis of iron, steel and alloy?The flame atomic absorption spectrometric method for the determination of calcium content | |
77.080 | H11 | GB/T 223.78-2000 | 钢铁及合金化学分析方法 姜黄素直接光度法测定硼含量 | Methods for chemical analysis of iron,steel and alloy Curcumin spectrophotometric method for the determination of boron content | IDT ISO 10153:1997 |
77.040.30 | H24 | GB/T 224-1987 | 钢的脱碳层深度测定法 | Determination of depth of decarburization of steel | |
77.040.30 | H23 | GB/T 225-1988 | 钢的淬透性末端淬火试验方法 | Steel-hardenability test by end quenching(Jominy test) | EQV ISO 642-79 |
77.040.30 | H24 | GB/T 226-1991 | 钢的低倍组织及缺陷酸蚀检验法 | Etch test for macrostructure and defect of steels | NEQ ISO 4969-80 |
77.040.30 | H24 | GB/T 227-1991 | 工具钢淬透性试验方法 | Tool steel - Method of hardenability test | NEQ NF A04-302-85 |
77.040.10 | H22 | GB/T 228-1987 | 金属拉伸试验法 | Metallic materials--Tensile testing | |
77.040.10 | H22 | GB/T 229-1994 | 金属夏比缺口冲击试验方法 | Metallic materials - Charpy notch impact test | EQV ISO 148-83 |
77.040.10 | H22 | GB/T 230-1991 | 金属洛氏硬度试验方法 | Metallic materials - Rockwell hardness test | NEQ ISO 6508-86 |
77.040.10 | H22 | GB/T 231-1984 | 金属布氏硬度试验方法 | Metallic materials--Brinell hardness test | |
77.040.10 | H23 | GB/T 232-1999 | 金属材料 弯曲试验方法 | Metallic materials--Bend test | EQV ISO 7438:1985 |
77.040.10 | H26 | GB/T 233-2000 | 金属材料 顶锻试验方法 | Metallic materials--Forging test | EQV ГOCT 8817:1982 |
77.040.10 | H23 | GB/T 235-1999 | 金属材料 厚度等于或小于3mm薄板和薄带 反复弯曲试验方法 | Metallic materials--Sheet and strip 3mm thick or less--Reverse bend test | EQV ISO 7799:1985 |
77.040.10 | H26 | GB/T 238-1984 | 金属线材反复弯曲试验方法 | Metallic materials--Wire--reverse bend test | NEQ ISO/DIS 7801-83 |
77.040.10 | H23 | GB/T 239-1999 | 金属线材扭转试验方法 | Metallic materials--Wire--Torsion test | EQV ISO 7800:1984
ISO 9649:1990 |
77.040.10 | H23 | GB/T 241-1990 | 金属管液压试验方法 | Metal tubes - Hydrostatic pressure testing | |
77.040.10 | H23 | GB/T 242-1997 | 金属管 扩口试验方法 | Metallic materials--Tube--Drift expanding test | EQV ISO 8493:1986(E) |
77.040.10 | H23 | GB/T 244-1997 | 金属管 弯曲试验方法 | Metallic materials--Tube--Bend test | EQV ISO 8491:1986(E) |
77.040.10 | H23 | GB/T 245-1997 | 金属管 卷边试验方法 | Metallic materials--Tube--Flanging test | EQV ISO 8494:1986(E) |
77.040.10 | H23 | GB/T 246-1997 | 金属管 压扁试验方法 | Metallic materials--Tube--Flattening test | EQV ISO 8492:1986(E) |
77.140.50 | H46 | GB/T 247-1997 | 钢板和钢带检验、包装、标志及质量证明书的一般规定 | General rule of acceptance,package,mark and certification for steel plates(sheets) and strips | NEQ ASTM A700:1990 |
ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) | 国際整合 |
77.120 | H60 | GB/T 340-1976 | 有色金属及合金产品牌号表示方法 | Non-ferrous metals and its alloys--Code of designation | |
77.140.60 | H49 | GB/T 341-1989 | 钢丝分类及术语 | Steel wire - Classification and vocabular | NEQ ГOCT 2333-80 |
77.140.65 | H49 | GB/T 342-1997 | 冷拉圆钢丝、方钢丝、六角钢丝尺寸、外形、重量及允许偏差 | Dimension shape mass and tolerance for cold-drawn round square and hexagonal steel wires | NEQ EN 10218-2:1994 |
77.140.60 | H49 | GB/T 343-1994 | 一般用途低碳钢丝 | Low carbon steel wire for general uses | NEQ JIS G 3532 |
77.140.60 | H49 | GB/T 346-1984 | 通讯线用镀锌低碳钢丝 | Galvanized low carbon steel wire for electric communications lines | |
77.140.60 | H49 | GB/T 347-1982 | 针布钢丝 | Card wire | |
77.140.60 | H49 | GB/T 348-1964 | 刺钢丝 | Barbed steel wires | |
77.040;
77. |
H21 | GB/T 351-1995 | 金属材料电阻系数测量方法 | Metallic materials--Resistivity measurement method | EQV IEC 60468-74 |
77.140.60 | H49 | GB/T 352-1988 | 密封钢丝绳 | Locked coil wire ropes | NEQ DIN 779-80 |
77.120.30 | H62 | GB/T 466-1982 | 铜分类 | Classification of copper | |
77.120.30 | H62 | GB/T 467-1997 | 阴极铜 | Copper cathode | |
77.120.30 | H62 | GB/T 468-1997 | 电工用铜线锭 | Copper wire bars for electrical purposes | |
77.120.60 | H62 | GB/T 469-1995 | 铅锭 | Lead ingots | |
77.150.60 | H62 | GB/T 470-1997 | 锌锭 | Zinc ingots | EQV ISO 752:1981 |
77.140.20 | H40 | GB/T 699-1999 | 优质碳素结构钢 | Quality carbon structural steels | |
77.140.20 | H40 | GB/T 700-1988 | 碳素结构钢 | Carbon structural steels | NEQ DIN 630-87 |
77.140.60 | H44 | GB/T 701-1997 | 低碳钢热轧圆盘条 | Hot-rolled low carbon steel wire rods | NEQ ISO 8457-2:1989 |
77.140.70 | H44 | GB/T 702-1986 | 热轧圆钢和方钢尺寸、外形、重量及允许偏差 | Hot-rolled round and square steels--Dimension,shape, weight and tolerance | |
77.140.50 | H44 | GB/T 704-1988 | 热轧扁钢尺寸、外形、重量及允许偏差 | Dimensions, shape, weight and tolerances for hot-rolled flats | NEQ ISO 1035/4-82 |
77.140.70 | H44 | GB/T 705-1989 | 热轧六角钢和八角钢尺寸、外形、重量及允许偏差 | Hot-rolled hexagonal and octagonal steel bars - Dimensions, shape, weight and tolerance | |
77.140.70 | H44 | GB/T 706-1988 | 热轧工字钢尺寸、外形、重量及允许偏差 | Hot-rolled beam steel - Dimensions, shape, weight and tolerances | NEQ ΓOCT 8239-72 |
77.140.70 | H44 | GB/T 707-1988 | 热轧槽钢尺寸、外形、重量及允许偏差 | Hot-rolled channel steel - Dimensions, shape, weight and tolerances | NEQ ΓOCT 8240-72 |
77.140 | H46 | GB/T 708-1988 | 冷轧钢板和钢带的尺寸、外形、重量及允许偏差 | Dimensions, shape, weight and tolerances for cold-rolled plates and sheets | NEQ ГOCT 19904-74 |
77.140 | H46 | GB/T 709-1988 | 热轧钢板和钢带的尺寸、外形、重量及允许偏差 | Dimensions, shape, weight and tolerances for hot-rolled plates and sheets | NEQ ГOCT 19903-74 |
77.140 | H46 | GB/T 710-1991 | 优质碳素结构钢热轧薄钢板和钢带 | Hot-rolled quality carbon structural steel sheets and strips | NEQ ГOCT 16523-70 |
77.140 | H46 | GB/T 711-1988 | 优质碳素结构钢热轧厚钢板和宽钢带 | Hot-rolled quality carbon structural steel plates and wide strips | NEQ ГOCT 1577 |
77.140.50 | H46 | GB 712-2000 | 船体用结构钢 | Hull structural steel | EQV IASS国际船级社协会 |
77.140.50 | H46 | GB 713-1997 | 锅炉用钢板 | Steel plates for boilers | NEQ ISO 5832-4:1996(E) |
77.140.20 | H40 | GB/T 714-2000 | 桥梁用结构钢 | Structural steel for bridge | |
77.140.70 | H44 | GB/T 715-1989 | 标准件用碳素钢热轧圆钢 | Hot-rolled round carbon steel bars for standard parts | |
77.140.60 | H46 | GB/T 716-1991 | 碳素结构钢冷轧钢带 | Cold-rolled carbon structural steel strips | |
77.080.10 | H41 | GB/T 717-1998 | 炼钢用生铁 | Pig iron for steelmaking | NEQ JIS G 2201-1976 |
77.080.10 | H41 | GB/T 718-1982 | 铸造用生铁 | Foundry pig iron | |
77.080.10 | H11 | GB/T 719-1984 | 生铁化学分析用试样制取方法 | Pig iron - Sampling for chemical analysis | |
77.120.60 | H62 | GB/T 728-1998 | 锡锭 | Ingot tin | |
77.140.70 | H40 | GB/T 905-1994 | 冷拉圆钢、方钢、六角钢尺寸、外形、重量及允许偏差 | Dimension, shape, weight and tolerance for cold-drawn round, square and hexagonal steels | NEQ ISO 286.1-88 |
77.140.70 | H44 | GB/T 908-1987 | 锻制圆钢和方钢尺寸、外形、重量及允许偏差 | Forged round and square steels--Dimension, shape, weightand tolerance | NEQ ΓOCT 22411-77 |
77.140.50 | H44 | GB/T 911-1966 | 工具钢热轧及锻制扁钢品种 | Hot-rolled and forged tool steel flats | |
77.140.50 | H46 | GB/T 912-1989 | 碳素结构钢和低合金结构钢热轧薄钢板及钢带 | Hot-rolled plain carbon and low alloy structural steel sheets and strips | |
77.120.70 | H62 | GB/T 915-1995 | 铋 | Bismuth | |
ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) | 国際整合 |
77.120.10 | J31 | GB/T 1173-1995 | 铸造铝合金 | Casting aluminium alloys | NEQ ASTM B26-92 |
77.140.20 | J31 | GB/T 1174-1992 | 铸造轴承合金 | cast bearing metals | NEQ ISO 4381-1981 |
77.150.60 | J31 | GB/T 1175-1997 | 铸造锌合金 | Casting zinc alloys | |
77.120.30 | J31 | GB/T 1176-1987 | 铸造铜合金技术条件 | Specification for cast copper alloys | NEQ ISO 1338-77 |
77.120.20 | J31 | GB/T 1177-1991 | 铸造镁合金 | Casting magnesium alloys | |
77.120.10 | H61 | GB/T 1196-1993 | 重熔用铝锭 | Unalloyed aluminium ingots for remelting | |
77.120.10 | H61 | GB/T 1197-1975 | 铝线锭 | Unalloyed aluminium ingots for wires | |
77.120.10 | H12 | GB/T 1198-1975 | 铝化学分析方法 | Methods for chemical analysis of aluminum | |
77.140.60 | H44 | GB/T 1220-1992 | 不锈钢棒 | Stainless steel bars | NEQ JIS G4303-88 |
77.140.60 | H44 | GB/T 1221-1992 | 耐热钢棒 | Heat-resisting steel bars | NEQ JIS G4311-87 |
77.080.20 | H44 | GB/T 1222-1984 | 弹簧钢 | Spring steel | NEQ JIS G4801-77 |
77.120.70 | H58 | GB/T 1234-1995 | 高电阻电热合金 | High resistance alloys for electrical heating | |
77.140.20 | H40 | GB/T 1298-1986 | 碳素工具钢技术条件 | Carbon tool steels--Technical requirements | NEQ ASTM A686-79 |
77.140.20 | H40 | GB/T 1299-2000 | 合金工具钢 | Alloy tool steels | NEQ ASTM A 681:1994 |
77.140.20 | H44 | GB/T 1301-1994 | 凿岩钎杆用中空钢 | Rock drilling equipment--Hollow drill steels in bar form | EQV ISO 722-91 |
77.140.80 | J31 | GB/T 1348-1988 | 球墨铸铁件 | Spheroidal graphite iron castings | |
77.080.10 | H41 | GB/T 1412-1985 | 球墨铸铁用生铁 | Pig iron used for spheroidal graphite cast iron | |
77.120.70 | H68 | GB/T 1419-1989 | 海绵铂 | Sponge platinum | NEQ ГOCT 14837-79 |
77.120.70 | H68 | GB/T 1420-1989 | 海绵钯 | Sponge palladium | NEQ ГOCT 14836-69 |
77.120.70 | H68 | GB/T 1421-1989 | 铑粉 | Rhodium powder | NEQ ГOCT 12342-76 |
77.120.70 | H68 | GB/T 1422-1989 | 铱粉 | Iridum powder | NEQ ГOCT 12338-66 |
77.040.99 | H21 | GB/T 1423-1996 | 贵金属及其合金密度的测试方法 | Method of measurement of density for precious metals and their alloys | |
77.040.99 | H21 | GB/T 1424-1996 | 贵金属及其合金材料电阻系数测试方法 | Method of measurement of resistivity of precious metals and their alloys | NEQ IEC 60468 |
77.040.99 | H21 | GB/T 1425-1996 | 贵金属及其合金熔化温度范围的测定 热分析试验方法 | Determination of melting temperature range for precious metals and their alloys--Testing method of thermal analysis | |
77-010;
77. |
H10 | GB/T 1467-1978 | 冶金产品化学分析方法标准的总则及一般规定 | General rules and regulations of the chemical analysis methods for products of metallurgical industries | |
77.120.60 | H62 | GB/T 1470-1988 | 铅及铅锑合金板 | Lead and lead-antimony alloy plate | NEQ JIS H4301 |
77.120.60 | H62 | GB/T 1471-1988 | 铅阳极板 | Lead plate for anode | NEQ JIS H4301 |
77.120.60 | H62 | GB/T 1472-1988 | 铅及铅锑合金管 | Lead and lead-antimony alloy tube | NEQ JIS H4311 |
77.120.60 | H62 | GB/T 1473-1988 | 铅及铅锑合金棒 | Lead and lead-antimony alloy rod | NEQ ISO 3488-78 |
77.120.60 | H62 | GB/T 1474-1988 | 铅及铅锑合金线 | Lead and lead-antimony alloy wire | |
77.040.30 | H21 | GB/T 1479-1984 | 金属粉末松装密度的测定 第一部分 漏斗法 | Metallic powders--Determination of apparent density--Part 1:Funnel method | EQV ISO 3923/1-79 |
77.040.30 | H21 | GB/T 1480-1995 | 金属粉末粒度组成的测定 干筛分法 | Determination of particle size for metallic powders--Dry sieving | |
77.160 | H16 | GB/T 1481-1998 | 金属粉末(不包括硬质合金粉末)在单轴压制中压缩性的测定 | Metallic powders(excluding powders for hardmetals)--Determination of compressibility in uniaxial compression | EQV ISO 3927:1985 |
77.040.30 | H21 | GB/T 1482-1984 | 金属粉末流动性的测定 标准漏斗法 (霍尔流速计) | Metallic powders--Determination of flowability by means of a calibrated funnel (Hall flowmeter) | EQV ISO 4490-78 |
77.120.70 | H15 | GB/T 1485-1979 | 铂铑合金化学分析方法 | Method for chemical analysis of platinumrhodium alloys | |
77.120.70 | H15 | GB/T 1486-1979 | 铂钌合金化学分析方法 | Method for chemical analysis of platinumruthenium alloys | |
77.120.70 | H15 | GB/T 1488-1979 | 铂钯铑合金化学分析方法 | Method for chemical analysis of platinum-palladium-rhodium alloys | |
77.120.70 | H15 | GB/T 1490-1979 | 金磷合金化学分析方法 | Method for chemical analysis of gold-phosphorus alloys | |
77.140.70 | H44 | GB 1499-1998 | 钢筋混凝土用热轧带肋钢筋 | Hot rolled ribbed steel bars for the reinforcement of concrete | NEQ ISO 6935-2:1991 |
ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) | 国際整合 |
77.180 | H94 | GB 1503-1989 | 铸钢轧辊 | Cast steel rolls | |
77.180 | H94 | GB 1504-1991 | 铸铁轧辊 | Cast iron rolls | |
77.120.30 | H62 | GB/T 1528-1997 | 铜及铜合金挤制管 | Extruded tube of copper and copper alloys | |
77.040.01 | H21 | GB/T 1550-1997 | 非本征半导体材料导电类型测试方法 | Standard methods for measuring conductivity type of extrinsic semiconducting materials | EQV ASTM F42-88 |
77.040.30; | H21 | GB/T 1551-1995 | 硅、锗单晶电阻率测定 直流两探针法 | Test method for resistivity of silicon and germanium bars using a two-point probe | NEQ ASTM F397-88 |
77.040.30; | H21 | GB/T 1552-1995 | 硅、锗单晶电阻率测定 直排四探针法 | Test method for measuring resistivity of monocrystal silicon and germanium with a collinear four-probe array | NEQ ASTM F397-88 |
77.040.01 | H21 | GB/T 1553-1997 | 硅和锗体内少数载流子寿命测定光电导衰减法 | Standard test methods for minority carrier lifetime in bulk germanium and silicon by measurement of photoconductivity decay | EQV ASTM F28:1990 |
77.040.30; | H26 | GB/T 1554-1995 | 硅晶体完整性化学择优腐蚀检验方法 | Test method for crystallographic perfection of silicon by preferential etch techniques | EQV ASTM F47-88 |
77.040.30; | H21 | GB/T 1557-1989 | 硅晶体中间隙氧含量的红外吸收测量方法 | The method of determining interstitial oxygen content in silicon by infrared absorption | NEQ ASTM F121-83 |
77.140.20 | H40 | GB/T 1591-1994 | 低合金高强度结构钢 | High strength low alloy structural steels | NEQ ISO 4950-81 |
77.120.70 | H62 | GB/T 1599-1979 | 锑分类及技术条件 | Classification and technical requirements for antimony | NEQ ΓOCT 1089-73 |
77.120.70 | H71 | GB/T 1773-1995 | 片状银粉 | Flake silver powders | |
77.120.70 | H71 | GB/T 1774-1995 | 超细银粉 | Superfine silver powders | |
77.120.70 | H71 | GB/T 1775-1995 | 超细金粉 | Superfine gold powders | |
77.120.70 | H71 | GB/T 1776-1995 | 超细铂粉 | Superfine platinum powder | |
77.120.70 | H71 | GB/T 1777-1995 | 超细钯粉 | Superfine palladium powder | |
77.040.20 | H26 | GB/T 1786-1990 | 锻制圆饼超声波检验方法 | Cheese forging - Method for ultrasonic inspection | |
77.040.10 | H23 | GB/T 1814-1979 | 钢材断口检验法 | Inspection method for steel work fractures | |
77.040.10 | H22 | GB/T 1817-1995 | 硬质合金常温冲击韧性试验方法 | Test method of impact toughness of cemented carbides at room temperature | |
77.040.10 | H22 | GB/T 1818-1994 | 金属表面洛氏硬度试验方法 | Metallic materials--Rockwell superficial hardness test | NEQ ISO 1024-89 |
77.120.60 | H62 | GB/T 1978-1988 | 电池锌板 | Zinc plate for dry cell | NEQ ASTM B69-79 |
77.040.01 | H24 | GB/T 1979-2001 | 结构钢低倍组织缺陷评级图 | Standard diagrams for macrostructure and defect of structural steels | |
ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) | 国際整合 |
77.040.10 | H22 | GB/T 2038-1991 | 金属材料延性断裂韧度JIC试验方法 | Metallic materials - Standard test method for JIC, a measure of ductile fracture toughness | |
77.040.10 | H22 | GB/T 2039-1997 | 金属拉伸蠕变及持久试验方法 | Metallic materials--Creep and stress-rupture test in tension | EQV ISO/DIS 204:1997 |
77.120.10 | H62 | GB/T 2040-1989 | 纯铜板 | Copper sheet | |
77.120.10 | H62 | GB/T 2041-1989 | 黄铜板 | Brass sheet | |
77.120.10 | H62 | GB/T 2042-1989 | 复杂黄铜板 | Special brass sheets | |
77.120.10 | H62 | GB/T 2043-1989 | 铝青铜板 | Aluminium bronze sheet | NEQ ISO 3486-86 |
77.120.10 | H62 | GB/T 2044-1980 | 镉青铜板 | Cadmium-bronze sheets | |
77.120.10 | H62 | GB/T 2045-1980 | 铬青铜板 | Chromium-bronze sheets | |
77.120.10 | H62 | GB/T 2046-1980 | 锰青铜板 | Manganese-bronze sheets | |
77.120.10 | H62 | GB/T 2047-1980 | 硅青铜板 | Silicon-bronze sheets | NEQ ΓOCT 4748-70 |
77.120.10 | H62 | GB/T 2048-1989 | 锡青铜板 | Bronze sheet | NEQ JIS E3110-86 |
77.120.10 | H62 | GB/T 2049-1980 | 锡锌铅青铜板 | Tin-zinc-lead-bronze sheets | |
77.120.10 | H62 | GB/T 2050-1980 | 普通白铜板 | Ordinary copper-nickel alloy sheets | |
77.120.10 | H62 | GB/T 2051-1989 | 铝白铜板 | Copper-nickel-aluminium alloy sheet | |
77.120.10 | H62 | GB/T 2052-1980 | 锰白铜板 | Manganese-copper-nickel alloy sheets | |
77.120.10 | H62 | GB/T 2053-1989 | 锌白铜板 | Copper-nickel-zinc alloy sheet | |
77.120.40 | H62 | GB/T 2054-1980 | 镍及镍合金板 | Nickel and nickel alloy sheets | |
77.120.70 | H62 | GB/T 2055-1989 | 镉阳极板 | Cadmium anode sheets | NEQ ГOCT 1468-71 |
77.120.30 | H62 | GB/T 2056-1980 | 铜阳极板 | Copper sheets for anode in electro-plate | |
77.120.40 | H62 | GB/T 2057-1989 | 镍阳极板 | Nickel anode sheets | NEQ ГOCT 2132-75 |
77.120.60 | H62 | GB/T 2058-1989 | 锌阳极板 | Zinc anode sheet | NEQ ГOCT 1180-71 |
77.120.30 | H62 | GB/T 2059-2000 | 铜及铜合金带材 | Strips of copper and copper alloys | |
77.120.30 | H62 | GB/T 2061-1989 | 散热器散热片专用纯铜带、黄铜带 | Copper and brass strip for radiating | |
77.120.30 | H62 | GB/T 2067-1980 | 锡锌铅青铜带 | Tin-zinc-lead-bronze strips | NEQ ISO 3487-80 |
77.120.30 | H62 | GB/T 2069-1980 | 铝白铜 (BA16-1.5、BA1 13-3)带 | Aluminium-copper-nickel alloy strips | |
77.120.40 | H62 | GB/T 2072-1993 | 镍及镍合金带 | Nickel and nickel alloy strips | NEQ ГOCT 2170 |
77.140.90 | H62 | GB/T 2073-1993 | 双金属带 | Bimetal strips | |
77.120.10 | H71 | GB/T 2082-1989 | 工业铝粉 | Industrial aluminium powder | NEQ MIL A512A-69 |
77.120.10 | H71 | GB/T 2083-1989 | 涂料铝粉 | Aluminium powder for paint | NEQ ГOCT 5494-71 |
77.120.10 | H71 | GB/T 2084-1989 | 发气铝粉 | Bubble aluminium powder | |
77.120.10 | H71 | GB/T 2085-1989 | 易燃铝粉 | Inflammable aluminium powder | NEQ MIL A512A-69 |
77.120.10 | H71 | GB/T 2086-1989 | 易燃细铝粉 | Inflammable fine aluminium powder | NEQ MIL A512A-69 |
77.140.80 | J31 | GB/T 2100-1980 | 不锈耐酸钢铸件技术条件 | Stainless acid-resistant steel castings--Specifications | |
77.140.70 | H44 | GB/T 2101-1989 | 型钢验收、包装、标志及质量证明书的一般规定 | General requirements of acceptance, packaging, marking and certification for section steel | |
77.140.70 | H48 | GB/T 2102-1988 | 钢管的验收、包装、标志和质量证明书 | Acceptance, packing, marking, and certification of pipe | NEQ ASTM A700-78 |
77.140.60 | H49 | GB/T 2103-1988 | 钢丝验收、包装、标志及质量证明书的一般规定 | General provisions for checking, packing, marking and quality certification of steel wire | NEQ ISO 3178-74 |
77.140.60 | H49 | GB/T 2104-1988 | 钢丝绳包装、标志及质量证明书的一般规定 | Steel wire ropes--Packing, marking and certificate--General requirements | NEQ ISO 3178-74 |
77.040.10 | H21 | GB/T 2105-1991 | 金属材料杨氏模量、切变模量及泊松比测量方法 (动力学法) | Metallic material?Standard test method for the Young's modulus, shear modulus and Poison's ratio (Dynamic method) | |
77.040.10 | H22 | GB/T 2107-1980 | 金属高温旋转弯曲疲劳试验方法 | Metal material--Twisting fatigue test | |
77.120.70 | H13 | GB/T 2129-1980 | 镉中铅量的测定 原子吸收分光光度法 | Determination of lead content in cadmium--Atomic absorption spectrophotometric method | |
77.120.70 | H13 | GB/T 2130-1980 | 镉中铜量的测定 (铜试剂铅盐分光光度法) | Determination of copper content in cadmium--Neoluproinelead-base photometric method | |
77.120.70 | H13 | GB/T 2131-1980 | 镉中锌量的测定 (原子吸收分光光度法) | Determination of zinc content in cadnium--Atomic absorption spectrophotometric method | |
77.120.70 | H13 | GB/T 2132-1980 | 镉中铁量的测定 (邻菲罗啉分光光度法) | Determination of iron content in cadmium--1,10-Phenanthroline photometric method | |
77.120.70 | H13 | GB/T 2133-1980 | 镉中砷量的测定 (砷钼蓝分光光度法) | Determination of arsenic content in cadmium--Arsenic-molybdenum blue photometric method | |
77.120.70 | H13 | GB/T 2134-1980 | 镉中锑量的测定 (孔雀绿分光光度法) | Determination of antimony content in cadmium--Malachite green photometric method | |
77.120.70 | H13 | GB/T 2135-1980 | 镉中锡量的测定 (苯芴酮-CTAB分光光度法) | Determination of tin content in cadmium--Phenylfluorone-CTAB photometric method | |
77.120.70 | H13 | GB/T 2136-1980 | 镉中铊量的测定 (结晶紫分光光度法) | Determination of thallium content in cadmium--Crystal violet photometric method | |
77.040.30 | H11 | GB/T 223.10-2000 | 钢铁及合金化学分析方法 铜铁试剂分离-铬天青S光度法测定铝含量 | Methods for chemical analysis of iron,steel and alloy The cupferron separation-chrome azurol S photometric method for the determination of aluminium content | |
77.100 | H42 | GB/T 2272-1987 | 硅铁 | Ferrosilicon | NEQ ASTM A100-80 |
77.040.10 | J04 | GB/T 2358-1994 | 金属材料裂纹尖端张开位移试验方法 | Test method for crack-tip opening displacement measurement of metallic materials | |
77.040.10 | N71 | GB/T 2490-1984 | 喷砂硬度机检验磨具硬度的方法 | Bonded abrasives hardness measurement by sand blasting | |
ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) | 国際整合 |
77.140.50 | H46 | GB/T 2518-1988 | 连续热镀锌薄钢板和钢带 | Continual hot-dip zinc-coated steel sheets and strips | NEQ JIS G3302-79 |
77.140.50 | H46 | GB/T 2520-2000 | 冷轧电镀锡薄钢板 | Cold-reduced electrolytic tinplate | NEQ ISO 11949:1995 |
77.140.40 | H46 | GB/T 2521-1996 | 冷轧晶粒取向、无取向磁性钢带(片) | Cold-rolled grain-oriented and non-oriented magnetic steel strip(sheet) | NEQ IEC 60404-8-7-1988 |
77.040 | H21 | GB/T 2522-1988 | 电工钢片(带)层间电阻、涂层附着性、叠装系数测试方法 | Magnetic sheet and strip--Methods of measurement of interlamination resistance and lamination factor and coat adhesiveness | NEQ IEC 60404-2-78 |
77.140.50 | H21 | GB/T 2523-1990 | 冷轧薄钢板(带)表面粗糙度测量方法 | Cold rolled sheet(strip) - Measuring method for surface roughness | |
77.120.50 | H64 | GB/T 2524-1981 | 海绵钛 | Sponge titanium | |
77.120.99 | H65 | GB/T 2525-1996 | 金属铈 | Cerium metal | |
77.160 | H72 | GB/T 2527-1989 | 矿山、油田钻头用硬质合金齿 | Hard metal (carbide) inserts for mining and oil--field rock bits | NEQ ГOCT 880-75 |
77.120.60 | H62 | GB/T 2528-1989 | 锡阳极板 | Tin anode sheets | |
77.120.30 | H62 | GB/T 2529-1989 | 铜导电板 | Copper sheets for electrical conduction purpose | NEQ JIS H3140-77 |
77.120.30 | H62 | GB/T 2531-1981 | 热交换器固定板用黄铜板 | Copper sheets for fixing boards in heat exchangers | NEQ DIN 17675-77 |
77.120.30 | H62 | GB/T 2532-1997 | 水箱水室用黄铜板带 | Brass sheet and strip for water chamber and water tank | |
77.120.70 | H14 | GB/T 2592.1-1981 | 铊中铜量的测定 三氯甲烷萃取铜试剂吸光光度法 | Thallium--Determination of copper content--Neocuproine-chloroform extraction photometric method | |
77.120.70 | H14 | GB/T 2592.2-1981 | 铊中铁量的测定 (邻菲罗啉吸光光度法) | Thallium--Determination of iron content--1,10-Phenanthroline photometric method | |
77.120.70 | H14 | GB/T 2592.3-1981 | 铊中汞量的测定 (双硫腙四氯化碳萃取吸光光度法) | Thallium--Determination of mercury content--Dithizone-carbon tetrachloride extraction photomrtric method | |
77.120.70 | H14 | GB/T 2592.4-1981 | 铊中锌量的测定 (双硫腙苯萃取吸光光度法) | Thallium--Determination of zinc content--Dithizone extraction photometric method | |
77.120.70 | H14 | GB/T 2592.5-1981 | 铊中镉量的测定 (双硫腙苯萃取吸光光度法) | Thallium--Determination of cadmium content--Dithizone extraction photometric method | |
77.120.70 | H14 | GB/T 2592.6-1981 | 铊中铅量的测定 (双硫腙苯萃取吸光光度法) | Thallium--Determination of lead content--Dithizone extraction photometric method | |
77.120.70 | H14 | GB/T 2592.7-1981 | 铊中铝量的测定 (铬天青S吸光光度法) | Thallium--Determination of aluminium content--Chromazurol S photometric method | |
77.120.70 | H14 | GB/T 2592.8-1981 | 铊中铟量的测定 (结晶紫苯萃取吸光光度法) | Thallium--Determination of indium content--Crystal violet extraction photometric method | |
77.120.70 | H14 | GB/T 2592.9-1981 | 铊中硅量的测定 异戊醇萃取硅钼蓝吸光光度法 | Thallium--Determination of silicon content--Isoamyl alcohol extraction molybdenum blue absorption photometric method | |
77.120.70 | H14 | GB/T 2592.10-1981 | 铊中铊量的测定 (EDTA容量法) | Thallium--Determination of thallium content--EDTA volumetric method | |
77.010;
77. |
H09 | GB 2595-1981 | 冶金分析化学实验室安全技术标准 | Safety of chemical laboratories--Technical standards for conducting metallurgical analysis | |
77.040.30 | H21 | GB/T 2596-1981 | 钨粉、碳化钨粉比表面积 (平均粒度) 测定 简化氮吸附法 | Tungsten powder and tungsten carbide powder--Determination of specific surface product (average grainine- ss--Simplified nitrogen absorption method | |
77.140.70 | H44 | GB/T 2597-1994 | 窗框用热轧型钢 | Heat-rolled window sash steel | |
77.180 | J31 | GB/T 2684-1981 | 铸造用原砂及混合料试验方法 | Foundry sands and sand mixtures for casting--Method of testing | |
77.080 | H42 | GB/T 2774-1991 | 金属锰 | Manganese metal | |
77.150.50 | H64 | GB/T 2965-1996 | 钛及钛合金棒材 | Titanium and titanium alloy bars | |
77.120.70 | H71 | GB/T 2967-1989 | 铸造碳化钨 | Cast tungsten carbide | |
77.120.70 | H65 | GB/T 2968-1994 | 金属钐 | Samarium metal | |
77.040.20 | H26 | GB/T 2970-1991 | 中厚钢板超声波检验方法 | Thicker steel plate - Method for ultrasonic inspection | |
77.040.20 | H23 | GB/T 2971-1982 | 碳素钢和低合金钢断口检验方法 | Method of fracture test for carbon and low alloy steels | |
77.040.10 | H20 | GB/T 2975-1998 | 钢及钢产品 力学性能试验取样位置及试样制备 | Steel and steel products--Location and preparation of test pieces for mechanical testing | EQV ISO 377:1997 |
77.040.10 | H26 | GB/T 2976-1988 | 金属线材缠绕试验方法 | Metalic materials--Wire--Wrapping test | NEQ ISO 7802-83 |
ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) | 国際整合 |
77.040.10 | H22 | GB/T 3075-1982 | 金属轴向疲劳试验方法 | Method of axial force controlled fatigue testing of metals | |
77.040.10 | H22 | GB/T 3076-1982 | 金属薄板 (带) 拉伸试验方法 | Method for tensile testing of metallic sheet and strip | |
77.140.20 | H40 | GB/T 3077-1999 | 合金结构钢 | Alloy structure steels | |
77.140.20 | H44 | GB/T 3078-1994 | 优质结构钢冷拉钢材技术条件 | Technical requirements for quality structural steel cold drawn bars | NEQ GOST 4543-71 |
77.140.60 | H49 | GB/T 3079-1993 | 合金结构钢丝 | Alloy structure steel wires | NEQ ASTM A752 |
77.140.60 | H49 | GB/T 3080-2001 | 高速工具钢丝 | High speed tool steel wire | |
77.140.60 | H49 | GB/T 3082-1984 | 铠装电缆用镀锌低碳钢丝 | Galvanized low carbon steel wire for armouring cables | |
77.140.20 | H40 | GB/T 3086-1982 | 高碳铬不锈轴承钢技术条件 | Specification for high carbon chromium stainless bearing steels | |
77.140.30 | H48 | GB 3087-1999 | 低中压锅炉用无缝钢管 | Seamless steel tubes for low and medium pressure | NEQ ISO 9329-1:1989 |
77.140.75 | H48 | GB/T 3090-2000 | 不锈钢小直径无缝钢管 | Stainless steel small diameter seamless steel tubes | NEQ ГOCT 14162:1979 |
77.140.75 | H48 | GB/T 3094-2000 | 冷拔异型钢管 | Cold drawn shaped steel tubes | NEQ ASTM A 500:1990 |
77.120.30 | H62 | GB/T 3114-1994 | 铜及铜合金扁线 | Copper and copper alloy rectangular wires | |
77.120.40 | H62 | GB/T 3120-1982 | 镍线 | Nickel wires | NEQ ΓOCT 2179-75 |
77.120.40 | H62 | GB/T 3121-1982 | 电真空器件用镍及镍合金线 | Nickel and its alloy wires for electronic tube | |
77.120.30 | H62 | GB/T 3125-1994 | 白铜线 | Copper-nickel alloy wires | |
77.120.10 | H62 | GB/T 3129-1982 | 铝钛合金丝 | Aluminium-titanium alloy wires | |
77.120.30 | H62 | GB/T 3133-1982 | 钟用黄铜线 | Brass wires for clocks | |
77.120.30 | H62 | GB/T 3134-1982 | 铍青铜线 | Copper-beryllium alloy wires | |
77.120.70 | H63 | GB/T 3136-1995 | 钽粉 | Tantalum powders | |
77.120.70 | H14 | GB/T 3137-1995 | 钽粉电性能试验方法 | Testing method of electrical property of tantalum powders | |
77.120.10 | H12 | GB/T 3169.1-1982 | 铝粉化学分析方法 气体容量法测定活性铝 | Chemical analysis of aluminium powder--The gasometric method for determination of active aluminium | |
77.120.10 | H12 | GB/T 3169.2-1982 | 铝粉化学分析方法 减杂质法测定总铝量 | Chemical analysis of aluminium powder--Determination of total aluminium by difference | |
77.120.10 | H12 | GB/T 3169.3-1982 | 铝粉化学分析方法 重量法测定水分 | Chemical analysis of aluminium powder--The gravimetric method for determination of moisture | |
77.120.10 | H12 | GB/T 3169.4-1982 | 铝粉化学分析方法 真空重量法测定水分 | Chemical analysis of aluminium powder--The vacuum-gravimetric method for determination of moisture | |
77.120.10 | H12 | GB/T 3169.5-1982 | 铝粉化学分析方法 高碘酸钾光度法测定锰 | Chemical analysis of aluminium powder--The potassium periodate photometric method for determination of manganese | |
77.120.10 | H12 | GB/T 3169.6-1982 | 铝粉化学分析方法 气体容量法测定油脂量 | Chemical analysis of aluminium powder--The gasometric method for determination of grease | |
77.120.10 | H21 | GB/T 3170.1-1982 | 铝粉粒度的测定 机械振动筛分法 | Determination of particle size of aluminium powder--Mechanical vibration sieve method | |
77.120.10 | H21 | GB/T 3170.2-1982 | 铝粉粒度的测定 风力手动筛分法 | Determination of particle size of aluminium powder--Manual-air-blowing sieve method | |
77.120.10 | H21 | GB/T 3170.3-1982 | 铝粉粒度的测定 乙醇筛洗法 | Determination of particle size of aluminium powder--Sieve analysis with alcohol | |
77.120.10 | H21 | GB/T 3171.1-1982 | 铝粉松装密度的测定 漏斗法 | Determination of apparent density of aluminium powder --Funnel method | |
77.120.10 | H21 | GB/T 3171.2-1982 | 铝粉松装密度的测定 容量计法 | Determination of apparent density of aluminium powder --Volumeter method | |
77.120.10 | H21 | GB/T 3172-1982 | 铝粉附着率的测定 钢片试验法 | Determination of adhesion ratio of aluminium powder-- Steel plate method | |
77.120.10 | H21 | GB/T 3173-1982 | 铝粉盖水面积的测定 | Determination of coating surface of aluminium powder on water | |
77.140.80 | J31 | GB/T 3180-1982 | 中锰抗磨球墨铸铁件技术条件 | Specification for medium manganese wear-resistant spheroidal iron castings | |
77.150.10 | H61 | GB/T 3190-1996 | 变形铝及铝合金化学成分 | Wrought aluminium and aluminium alloys--Chemical composition limits | NEQ ISO 209-1 |
77.120.10 | H61 | GB/T 3191-1998 | 铝及铝合金挤压棒材 | Extrusion rods and bars of aluminium and aluminium alloy | |
77.120.10 | H61 | GB/T 3194-1998 | 铝及铝合金板、带材的尺寸允许偏差 | Wrought aluminium and aluminium alloy sheets and strips--Tolerances on form and dimensions | NEQ ANSI H35.2(M)-1993 |
77.150.10 | H61 | GB/T 3196-2001 | 铆钉用铝及铝合金线材 | Aluminium and alumium alloy wires for riveting purpose | |
77.150.10 | H61 | GB/T 3197-2001 | 焊条用铝及铝合金线材 | Aluminium and alumium alloy wires for welding purpose | |
77.150.10 | H61 | GB 3198-1996 | 工业用纯铝箔 | Aluminium foil for general purpose | NEQ JIS H 4160 |
77.150.01 | H60 | GB/T 3199-1996 | 铝及铝合金加工产品 包装、标志、运输、贮存 | Wrought aluminium and aluminium alloy products--Packing, marking, transporting and storing | |
77.140.20 | H40 | GB/T 3203-1982 | 渗碳轴承钢技术条件 | Specification for carburizing steels of bearings | |
77.140.60 | H49 | GB/T 3206-1982 | 优质碳素结构钢丝 | Carbon constructional quality steel wires | |
77.140.20 | H49 | GB/T 3207-1988 | 银亮钢 | Bright steel | NEQ JIS G3123-79 |
77.120.40 | H42 | GB/T 3211-1987 | 金属铬 | Chromium metal | NEQ ASTM A481-79 |
77.040.30 | H23 | GB/T 3246.1-2000 | 变形铝及铝合金制品显微组织检验方法 | Wrought aluminium and aluminium alloys producps inspection method for sfructure | |
77.040.30 | H23 | GB/T 3246.2-2000 | 变形铝及铝合金制品低倍组织检验方法 | Wrought aluminium and aluminium alloys produrts inspection method for macrostructure | |
77.120.40 | H21 | GB/T 3248-1982 | 铜、镍及其合金电阻系数测定方法 | Determining method of resistivity of copper, nickel and their alloys | |
77.040.30 | H21 | GB/T 3249-1982 | 难熔金属及化合物粉末粒度的测定方法 费氏法 | Standard method for determination of particle size of powders of refractory metals and compounds--Fisher method | |
77.120.10 | H26 | GB/T 3250-1982 | 铝及铝合金铆钉线铆接试验方法 | Aluminium and aluminium alloys--Riveting test method for rivet wire | |
77.120.10 | H26 | GB/T 3251-1982 | 铝及铝合金管材压缩试验方法 | Aluminium and aluminium alloys--Compression test method for tubes | |
77.120.10 | H22 | GB/T 3252-1982 | 铝及铝合金铆钉线与铆钉剪切试验方法 | Aluminium and aluminium alloys--Shear test method for rivet wire and rivets | |
77.040.30 | H13 | GB/T 3253.1-2001 | 锑化学分析方法 砷量的测定 | Methods for chemical analysis of antimony--Determination of arsenic content | |
77.040.30 | H13 | GB/T 3253.2-2001 | 锑化学分析方法 铁量的测定 | Methods for chemical analysis of antimony--Determination of iron content | |
77.040.30 | H13 | GB/T 3253.3-2001 | 锑化学分析方法 铅、铜量的测定 | Methods for chemical analysis of antimony--Determination of lead and copper contents | |
77.040.30 | H13 | GB/T 3253.4-2001 | 锑化学分析方法 硫量的测定 | Methods for chemical analysis of antimony--Determination of sulfur content | |
77.040.30 | H13 | GB/T 3253.5-2001 | 锑化学分析方法 硒量的测定 | Methods for chemical analysis of antimony--Determination of selenium content | |
77.040.30 | H13 | GB/T 3253.6-2001 | 锑化学分析方法 铋量的测定 | Methods for chemical analysis of antimony-Determination of bismuth content | |
77.120.01 | H13 | GB/T 3254.1-1998 | 三氧化二锑化学分析方法 三氧化二锑量的测定 | Antimony trioxide--Determination of antimony trioxide content | |
77.120.01 | H13 | GB/T 3254.2-1998 | 三氧化二锑化学分析方法 砷量的测定 | Antimony trioxide--Determination of arsnic content | |
77.120.01 | H13 | GB/T 3254.3-1998 | 三氧化二锑化学分析方法 铅量的测定 | Antimony trioxide--Determination of lead content | |
77.120.01 | H13 | GB/T 3254.4-1998 | 三氧化二锑化学分析方法 铜量的测定 | Antimony trioxide--Determination of copper content | |
77.120.01 | H13 | GB/T 3254.5-1998 | 三氧化二锑化学分析方法 铁量的测定 | Antimony trioxide--Determination of iron content | |
77.120.01 | H13 | GB/T 3254.6-1998 | 三氧化二锑化学分析方法 硒量的测定 | Antimony trioxide--Determination of selenium content | |
77.120.70 | H14 | GB/T 3256.1-1982 | 电真空用锆粉化学分析方法 重量法测定总锆及活性锆 | Chemical analysis of zirconium powder for electro-vacuum uses--The gravimetric method for determination of total zirconium and active zirconium | |
77.120.70 | H14 | GB/T 3256.2-1982 | 电真空用锆粉化学分析方法 磺基水杨酸光度法测定铁 | Chemical analysis of zirconium powder for electro-vacuum uses--The sulfosalicylic acid photometric method for determination of iron | |
77.120.70 | H14 | GB/T 3256.3-1982 | 电真空用锆粉化学分析方法 钼蓝光度法测定硅 | Chemical analysis of zirconium powder for electro-vacuum uses--The molybdenum blue photometric method for determination of silicon | |
77.120.70 | H14 | GB/T 3256.4-1982 | 电真空用锆粉化学分析方法 钼蓝光度法测定磷 | Chemical analysis of zirconium powder for electro-vacuum uses--The molybdenum blue photometric method for determination of phosphorus | |
77.120.70 | H14 | GB/T 3256.5-1982 | 电真空用锆粉化学分析方法 原子吸收分光光度法测定钙、镁 | Chemical analysis of zirconium powder for electro-vacuum uses--The atomic absorption spectrophotometric method for determination of calcium and magnesium | |
77.120.70 | H14 | GB/T 3256.6-1982 | 电真空用锆粉化学分析方法 铬天青S 光度法测定铝 | Chemical analysis of zirconium powder for electro-vacuum uses--The chrome azurol S photometric method for determination of aluminium | |
77.120.70 | H14 | GB/T 3256.7-1982 | 电真空用锆粉化学分析方法 次甲基蓝光度法测定硫 | Chemical analysis of zirconium powder for electro-vacuum uses--The methylene blue photometric method for determination of sulphur | |
77.120.70 | H14 | GB/T 3256.8-1983 | 电真空用锆粉化学分析方法 燃烧重量法测定氢量 | Methods for chemical analysis of zirconium powder for electro-vacuum uses--The combustion-gravimetric method for the determination of hydrogen content | |
77.120.99 | H13 | GB/T 3260.1-2000 | 锡化学分析方法 铜量的测定 | Methods for chemical analysis of tin Determination of copper content | |
77.120.99 | H13 | GB/T 3260.2-2000 | 锡化学分析方法 铁量的测定 | Methods for chemical analysis of tin Determination of iron content | |
77.120.99 | H13 | GB/T 3260.3-2000 | 锡化学分析方法 铋量的测定 | Methods for chemical analysis of tin Determination of iron content | |
77.120.99 | H13 | GB/T 3260.4-2000 | 锡化学分析方法 铅量的测定 | Methods for chemical analysis of tin Determination of lead content | |
77.120.99 | H13 | GB/T 3260.5-2000 | 锡化学分析方法 锑量的测定 | Methods for chemical analysis of tin Determination of antimony content | |
77.120.99 | H13 | GB/T 3260.6-2000 | 锡化学分析方法 砷量的测定 | Methods for chemical analysis of tin Determination of arsenic content | |
77.120.99 | H13 | GB/T 3260.7-2000 | 锡化学分析方法 铝量的测定 | Methods for chemical analysis of tin Determination of aluminum content | |
77.120.99 | H13 | GB/T 3260.9-2000 | 锡化学分析方法 铅、铜、锌量的测定 | Methods for chemical analysis of tin Determination of lead,copper and zinc content | |
77.120.99 | H13 | GB/T 3260.10-2000 | 锡化学分析方法 硫量的测定 | Methods for chemical analysis of tin Determination of sulphur content | |
77.120.99 | H13 | GB/T 3260.11-2000 | 锡化学分析方法 镉量的测定 | Methods for chemical analysis of tin Determination of cadmium content | |
77.140.50 | H46 | GB/T 3273-1989 | 汽车大梁用热轧钢板 | Hot-rolled steel plates and sheets for automobile frames | NEQ JIS G3113-87 |
77.140.50 | H46 | GB/T 3274-1988 | 碳素结构钢和低合金结构钢 热轧厚钢板和钢带 | Carbon structural and low alloy steel--Rotled plates and strips | NEQ ΓOCT 14637-79 |
77.140.50 | H46 | GB/T 3275-1991 | 汽车制造用优质碳素结构钢热轧钢板和钢带 | Hot-rolled quality carbon structural steel plates and strips for automobile | |
77.140.50 | H46 | GB/T 3277-1991 | 花纹钢板 | Corrugated steel plates with lath and lentilform | |
77.140.50 | H46 | GB/T 3278-2001 | 碳素工具钢热轧钢板 | Hot-rolled carbon tool steel sheets and plates | |
77.140.50 | H46 | GB/T 3279-1989 | 弹簧钢热轧薄钢板 | Hot-rolled spring steel sheets | |
77.140.50 | H46 | GB/T 3280-1992 | 不锈钢冷轧钢板 | Cold rolled stainless steel sheets and plates | |
77.100 | H42 | GB/T 3282-1987 | 钛铁 | Ferrotitanium | NEQ ΓOCT 4761-80 |
77.040.20 | H26 | GB/T 3310-1999 | 铜合金棒材超声波探伤方法 | Copper alloy bars-Ultrasonic testing method | |
77.120.70 | H14 | GB/T 3311-1982 | 钨铈合金中铈的测定 氧化还原容量法 | Determination of cerium in cerium-tungsten alloys--oxidation-reduction volumetry | |
77.120.70 | H14 | GB/T 3312-1982 | 钨钍合金中二氧化钍的测定 重量法 | Determination of thorium dioxide in thorium-tungsten alloys--Weight method | |
77.120.70 | H14 | GB/T 3313-1982 | 钨铼合金中铼的测定 丁二酮肟比色法 | Determination of rhenium in rhenium-tungsten alloys--Spectrophotometric method using dimethylglyoxime | |
77.040.10 | T64 | GB/T 3373-1982 | 拖拉机和农业、林业机械用轮辋 | Rims for tractors,agricultural and forestry machines | |
77.140.70 | H44 | GB/T 3414-1994 | 煤机用热轧异型钢 | Hot-rolled profiled steels for coal mechanism | |
77.120.70 | H42 | GB/T 3418-1982 | 电解金属锰 | Electrolytic manganese metal | |
77.140.60 | H49 | GB/T 3428-1997 | 钢芯铝绞线用镀锌钢丝 | Galvanized steel core wires for aluminium cable steel reinforced | EQV IEC 60888:1987 |
77.150 | H63 | GB/T 3457-1998 | 氧化钨 | Tungstic oxide | |
77.140.90; | H71 | GB/T 3458-1982 | 钨粉技术条件 | Technical requirements of tungsten powders | |
77.140.90; | H71 | GB/T 3459-1982 | 钨条 | Tungsten bars | |
77.140.90; | H63 | GB/T 3460-1982 | 钼酸铵技术条件 | Technical requirements of ammonium molybdate | |
77.140.90; | H61 | GB/T 3461-1982 | 钼粉技术条件 | Technical requirements of molybdenum powders | |
77.140.90; | H63 | GB/T 3462-1982 | 钼条和钼板坯 | Bars and plate blanks of molybdnum | |
77.140.90; | H63 | GB/T 3463-1995 | 钽丝 | Tantalum wires | |
77.040.30 | H23 | GB/T 3488-1983 | 硬质合金--显微组织的金相测定 | Hardmetals--Metallographic determination of microstructure | EQV ISO 4499-78 |
77.040.30 | H23 | GB/T 3489-1983 | 硬质合金 孔隙度和非化合碳的金相测定 | Hardmetals--Metallographic determination of porosity and uncombined carbon | EQV ISO 4505-78 |
77.040.30 | H21 | GB/T 3493-1983 | 贵金属及其合金细丝直径测量方法 (称重法) | Standard method for measuring diameter of fine wire of the precious metals and their alloys(weighing method) | |
77.120.20 | H61 | GB/T 3499-1995 | 重熔用镁锭 | Unalloyed magnesium ingots for remelting | NEQ 「OCT 804-84 |
ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) | 国際整合 |
77.160 | H70 | GB/T 3500-1998 | 粉末冶金术语 | Powder metallurgy--Vocabulary | IDT ISO 3252:1996 |
77.140.60 | H46 | GB/T 3522-1983 | 优质碳素结构钢冷轧钢带 | Cold-rolled quality carbon structural steel strips | |
77.140.60 | H46 | GB/T 3524-1992 | 碳素结构钢和低合金结构钢热轧钢带 | Hot-rolled cardon and low alloy structural steel strips | |
77.140.30 | H46 | GB 3531-1996 | 低温压力容器用低合金钢钢板 | Low alloy steel plates for low temperature pressure vessels | |
77.120.70 | H62 | GB/T 3610-1997 | 电池锌饼 | Zinc wafer for dry cell | |
77.160 | H72 | GB/T 3612-1989 | 量具用硬质合金毛坯 | As-sintered hardmetal blanks used in measuring tools | |
77.120.10 | H61 | GB/T 3614-1999 | 铝合金箔 | Aluminium alloy foil | NEQ JIS H4160
DIN 1788 |
77.120.10 | H61 | GB/T 3615-1999 | 电解电容器用铝箔 | Aluminium foil for electrolytic capacitor | |
77.120.10 | H61 | GB/T 3616-1999 | 电力电容器用铝箔 | Aluminium foil for power capacitors | |
77.120.10 | H61 | GB/T 3618-1989 | 铝及铝合金花纹板 | Wrought aluminium and aluminium alloy?Patterned sheet | |
77.120.50 | H64 | GB/T 3620.1-1994 | 钛及钛合金牌号和化学成分 | Designation and composition of titanium and titanium alloys | |
77.120.50 | H64 | GB/T 3620.2-1994 | 钛及钛合金加工产品化学成分及成分允许偏差 | Titanium and titanium alloys--permissible variations of chemical composition for wrought product analysis | |
77.120.50 | H64 | GB/T 3621-1994 | 钛及钛合金板材 | Titanium and titanium alloy sheet and plate | |
77.120.50 | H64 | GB/T 3622-1999 | 钛及钛合金带、箔材 | Titanium and titanium alloy strip and foil | |
77.120.50 | H64 | GB/T 3623-1998 | 钛及钛合金丝 | Titanium and titanium alloy wire | |
77.120.50 | H64 | GB/T 3624-1995 | 钛及钛合金管 | Titanium and titanium alloy tubes | NEQ ASTM B337-83(92) |
77.120.50 | H64 | GB/T 3625-1995 | 换热器及冷凝器用钛及钛合金管 | Titanium and titanium alloy tubes for condensers and heat exchangers | NEQ ASTM B338-91 |
77.120.60; | H71 | GB/T 3626-1983 | 五氧化二钽技术条件 | Technical requirements of tantalum pentaoxide | |
77.140.90 | H63 | GB/T 3628-1995 | 钽及钽合金箔材 | Tantalum and tantalum alloy foils | NEQ ASTM B 708-91 |
77.140.90; | H63 | GB/T 3630-1983 | 铌板材、带材和箔材 | Niobium steet,shrip and foil | |
77.120.70 | H62 | GB/T 3631-1983 | 湿法朱砂技术条件 | Technical requirements of hydro-cinnabar | |
77.140.75 | H48 | GB/T 3639-2000 | 冷拔或冷轧精密无缝钢管 | Cold-drawn or cold-rolled precision seamless steel tubes | NEQ DIN 2391/1/2:1994 |
77.100 | H42 | GB/T 3648-1996 | 钨铁 | Ferrotungsten | |
77.100 | H42 | GB/T 3649-1987 | 钼铁 | Ferromolybdenum | NEQ ASTM A132-84 |
77.100 | H42 | GB/T 3650-1995 | 铁合金验收、包装、储运、标志和质量证明书的一般规定 | The general rules for inspection, packing, storing transportation, marking and certification of ferroalloy | |
77.040.30 | H21 | GB/T 3651-1983 | 金属高温导热系数测量方法 | Measuring method for thermal conductivity of metal at high temperature | |
77.100 | H11 | GB/T 3653.1-1988 | 硼铁化学分析方法 碱量滴定法测定硼量 | Methods for chemical analysis of ferroboron--The alkalimetric method for the determination of boron content | EQV ΓOCT 14021.1-78 |
77.100 | H11 | GB/T 3653.2-1983 | 硼铁化学分析方法 气体容量法测定碳量 | Methods for chemical analysis of ferroboron--The gasometric method for the determination of carbon content | |
77.100 | H11 | GB/T 3653.3-1988 | 硼铁化学分析方法 高氯酸脱水重量法测定硅量 | Methods for chemical analysis of ferroboron--The perchloric acid dehydration-gravimetric method for the determination of silicon content | NEQ JIS G1327-77 |
77.100 | H11 | GB/T 3653.4-1988 | 硼铁化学分析方法 EDTA容量法测定铝量 | Methods for chemical analysis of ferroboron--The EDTA volumetric method for the determination of aluminium content | NEQ JIS G1327-77 |
77.100 | H11 | GB/T 3653.5-1983 | 硼铁化学分析方法 色层分离硫酸钡重量法测定硫量 | Methods for chemical analysis of ferroboron--The chromatographic seperation-barium sulfate gravimetric method for the determination of sulfur content | |
77.100 | H11 | GB/T 3653.6-1988 | 硼铁化学分析方法 锑磷钼蓝光度法测定磷量 | Methods for chemical analysis of ferroboron--The reduced molybdoantimonylphosphoric acid photometric method for the determination of phosphorus content | |
77.100 | H11 | GB/T 3654.1-1983 | 铌铁化学分析方法 纸上色层分离重量法测定铌、钽量 | Methods for chemical analysis of ferroniobium--The paper chromatograph-gravimetric method for the determination of niobium and tantalum content | |
77.100 | H11 | GB/T 3654.2-1983 | 铌铁化学分析方法 新亚铜灵- 三氯甲烷萃取光度法测定铜量 | Methods for chemical analysis of ferroniobium--The neocuproine-chloroform extraction photometric method for the determination of copper content | |
77.100 | H11 | GB/T 3654.3-1983 | 铌铁化学分析方法 重量法测定硅量 | Methods for chemical analysis of ferroniobium--The gravimetric method for the determination of silicon content | |
77.100 | H11 | GB/T 3654.4-1983 | 铌铁化学分析方法 燃烧重量法测定碳量 | Methods for chemical analysis of ferroniobium--The combustion gravimetric method for the determination of carbon content | |
77.100 | H11 | GB/T 3654.5-1983 | 铌铁化学分析方法 钼蓝光度法测定磷量 | Methods for chemical analysis of ferroniobium--The molybdenum blue photometric method for the determination of the phosphorus content | |
77.100 | H11 | GB/T 3654.6-1983 | 铌铁化学分析方法 燃烧碘量法测定硫量 | Methods for chemical analysis of ferroniobium--The combustion-iodate volumetric method for the determination of sulfur content | |
77.100 | H11 | GB/T 3654.7-1983 | 铌铁化学分析方法 次甲基蓝光度法测定硫量 | Methods for chemical analysis of ferroniobium--The methylene blue photometric method for the determination of sulfur content | |
77.100 | H11 | GB/T 3654.8-1983 | 铌铁化学分析方法 变色酸光度法测定钛量 | Methods for chemical analysis of ferroniobium--The chromotropic acid photometric method for the determination of titanium content | |
77.100 | H11 | GB/T 3654.9-1983 | 铌铁化学分析方法 硫氰酸盐光度法测定钨量 | Methods for chemical analysis of ferroniobium--The thiocyanate photometric method for the determination of tungsten content | |
77.100 | H11 | GB/T 3654.10-1983 | 铌铁化学分析方法 EDTA容量法测定铝量 | Methods for chemical analysis of ferroniobium--The EDTA volumetric method for the determination of aluminum content | |
77.040.01 | H21 | GB/T 3655-2000 | 用爱泼斯坦方圈测量电工钢片(带)磁性能的方法 | Methods of measurement of the magnetic properties of electrical steel sheet and strip by means of an Epstein frame | NEQ IEC 60404-2:1996 |
77.040 | H21 | GB/T 3656-1983 | 电工用纯铁磁性能测量方法 | Measurement methods of magnetic properties of electrical iron | |
77.040 | H21 | GB/T 3657-1983 | 软磁合金直流磁性能测量方法 | Measurement method of direct magnetic properties of soft magnetic alloys | |
77.040 | H21 | GB/T 3658-1990 | 软磁合金交流磁性能测量方法 | Soft magnetic alloys - Measuring method for alternative magnetic properties | |
77.040.10 | H22 | GB/T 3771-1983 | 铜合金硬度与强度换算值 | Conversion of hardness and strength for copper alloys | |
77.100 | H42 | GB/T 3795-1996 | 锰铁 | Ferromanganese | NEQ ASTM A99-82 |
77.120.70 | H14 | GB/T 3825-1983 | 钨钼合金化学分析方法 EDTA容量法测定钼量 | Method for chemical analysis of tungsten-molybdenum alloy--The EDTA volumetric method for the determination of molybdenum content | |
77.040 | H72 | GB/T 3849-1983 | 硬质合金洛氏硬度 (A标尺) 试验方法 | Hardmetals--Rockwell hardness (scale A) test emthod | EQV ISO 3738/1-82 |
77.040 | H72 | GB/T 3850-1983 | 致密烧结金属材料与硬质合金密度测定方法 | Impermeable sintered metal materials and hardmetals--determination of density | EQV ISO 3369-75 |
77.040 | H72 | GB/T 3851-1983 | 硬质合金横向断裂强度测定方法 | Hardmetals--determination of transverse rupture strength | EQV ISO 3327-82 |
77.080 | H63 | GB/T 3875-1983 | 钨板 | Tungsten sheet | |
77.080 | H63 | GB/T 3876-1983 | 钼及钼合金板 | Molybdenum and molybdenum alloy sheet | |
77.080 | H63 | GB/T 3877-1983 | 钼箔 | Molybdenum foil | |
77.160 | H72 | GB/T 3879-1983 | 钢结硬质合金材料毛坯 | The material blanks of steel bonded carbide | |
77.120.10 | H61 | GB/T 3880-1997 | 铝及铝合金轧制板材 | Aluminium and aluminium alloy rolled sheet | NEQ ASTM B209 |
77.150.10 | H61 | GB/T 3954-2001 | 电工圆铝杆 | Aluminium rod for electrical purpose | |
77.140.90 | H71 | GB/T 3990-1983 | 镍包氧化铝复合粉 | Nickel-coated alumina composite powders | |
77.140.90 | H71 | GB/T 3991-1983 | 钴包碳化钨复合粉 | Cobalt-coated tungsten carbide composite powders | |
77.140.90 | H71 | GB/T 3992-1995 | 镍包铬复合粉 | Nickel-coated chromium composite powders | |
77.140.90 | H71 | GB/T 3993-1983 | 镍包铜复合粉 | Nickel-coated copper composite powders | |
ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) | 国際整合 |
77.120.99 | H42 | GB/T 4008-1996 | 锰硅合金 | Ferromanganese-silicon | NEQ ASTM A483-88 |
77.100 | H42 | GB/T 4009-1989 | 硅铬合金 | Chromium silicon | |
77.100 | H42 | GB/T 4010-1994 | 铁合金化学分析用试样的采取和制备 | Ferroalloys--Sampling and preparation of samples for chemical analysis | NEQ ISO 4552-87 |
77.040.30 | H26 | GB/T 4058-1995 | 硅抛光片氧化诱生缺陷的检验方法 | Test method for detection of oxidation induced defects in polished silicon wafers | EQV ASTM F47-88 |
77.040.30 | H21 | GB/T 4059-1983 | 硅多晶气氛区熔磷检验方法 | Polycrystalline silicon--Examination method--Zone-melting on phosphorus under controlled atmosphere | |
77.040.30 | H21 | GB/T 4060-1983 | 硅多晶真空区熔基硼检验方法 | Polycrystalline silicon--Examination method--Vacuum zone-melting on boron | |
77.040.30 | H25 | GB/T 4061-1983 | 硅多晶断面夹层化学腐蚀检验方法 | Polycrystalline silicon--Examination method--Assessment of sandwiches on cross-section by chemical corrosion | |
77.150.99 | H62 | GB/T 4062-1998 | 三氧化二锑 | Antimony trioxide | |
77.040.01 | H21 | GB/T 4067-1999 | 金属材料电阻温度特征参数的测定 | Testing method for electrical resistance-temperature characteristicparameters of metallic materials | EQV ASTM B70:1990(1995) |
77.120.99 | H13 | GB/T 4103.1-2000 | 铅及铅合金化学分析方法 锡量的测定 | Methods for chemical analysis of lead and lead alloys Determination of tin content | |
77.120.99 | H13 | GB/T 4103.2-2000 | 铅及铅合金化学分析方法 锑量的测定 | Methods for chemical analysis of lead and lead alloys Determination of antimony content | |
77.120.99 | H13 | GB/T 4103.3-2000 | 铅及铅合金化学分析方法 铜量的测定 | Methods for chemical analysis of lead and lead alloys Determination of copper content | |
77.120.99 | H13 | GB/T 4103.4-2000 | 铅及铅合金化学分析方法 铁量的测定 | Methods for chemical analysis of lead and lead alloys Determination of iron content | |
77.120.99 | H13 | GB/T 4103.5-2000 | 铅及铅合金化学分析方法 铋量的测定 | Methods for chemical analysis of lead and lead alloys Determination of bismuth content | |
77.120.99 | H13 | GB/T 4103.6-2000 | 铅及铅合金化学分析方法 砷量的测定 | Methods for chemical analysis of lead and lead alloys Determination of arsenic content | |
77.120.99 | H13 | GB/T 4103.7-2000 | 铅及铅合金化学分析方法 硒量的测定 | Methods for chemical analysis of lead and lead alloys Determination of selenium content | |
77.120.99 | H13 | GB/T 4103.8-2000 | 铅及铅合金化学分析方法 碲量的测定 | Methods for chemical analysis of lead and lead alloys Determination of tellurium content | |
77.120.99 | H13 | GB/T 4103.9-2000 | 铅及铅合金化学分析方法 钙量的测定 | Methods for chemical analysis of lead and lead alloys Determination of calcium content | |
77.120.99 | H13 | GB/T 4103.10-2000 | 铅及铅合金化学分析方法 银量的测定 | Methods for chemical analysis of lead and lead alloys Determination of silver content | |
77.120.99 | H13 | GB/T 4103.11-2000 | 铅及铅合金化学分析方法 锌量的测定 | Methods for chemical analysis of lead and lead alloys Determination of zinc content | |
77.120.99 | H13 | GB/T 4103.12-2000 | 铅及铅合金化学分析方法 铊量的测定 | Methods for chemical analysis of lead and lead alloys Determination of thallium content | |
77.120.99 | H13 | GB/T 4103.13-2000 | 铅及铅合金化学分析方法 铝量的测定 | Methods for chemical analysis of lead and lead alloys Determination of aluminium content | |
77.040.10 | H22 | GB/T 4105-1983 | 钨丝下垂试验方法 | Test method for sag of tungsten wire | |
77.040.30 | H21 | GB/T 4106-1983 | 钨丝二次再结晶温度测量方法 | Determination method for secondary recrystallization temperature of tungsten wire | |
77.040.30 | H21 | GB/T 4107-1983 | 镁粉松装密度的测定 斯科特容量法 | Magnesium powders--Determination of apparent density--Scott volumetric method | |
77.040.30 | H21 | GB/T 4108-1983 | 镁粉、铝镁合金粉粒度组成的测定 干筛分法 | Magnesium powders and aluminium-magnesium alloy powders--Determination of particle size by dry sieving method | |
77.120.70 | H68 | GB 4134-1994 | 金锭 | Gold ingots | |
77.120.70 | H68 | GB 4135-1994 | 银锭 | Silver ingots | |
77.160 | H71 | GB/T 4136-1994 | 粉末冶金用还原铁粉 | Reduced iron powders for powder metallurgy | NEQ GOST 9849-86 |
77.100 | H42 | GB/T 4137-1993 | 稀土硅铁合金 | Rare-earth ferrosilicon | |
77.100 | H42 | GB/T 4138-1993 | 稀土镁硅铁合金 | Rare-earth ferrosilicomagnesium | |
77.100 | H42 | GB/T 4139-1987 | 钒铁 | Ferrovanadium | NEQ ASTM A102-81 |
77.120.70 | H65 | GB/T 4153-1993 | 混合稀土金属 | Mischmetal | |
77.040.10 | H26 | GB/T 4156-1984 | 金属杯突试验方法 (厚度0.2~2mm) | Metals--Cupping testing method (thickness 0.2~2mm) | |
77.040.10 | H22 | GB/T 4157-1984 | 金属抗硫化物应力腐蚀开裂恒负荷拉伸试验方法 | Sustained load tensile test method of metals for resi-stance to sulfide stress corrosion cracking | EQV (NACE)TM-01-77 |
77.040.10 | H22 | GB/T 4158-1984 | 金属艾氏冲击试验方法 | The izod impact test on metals | |
77.040.10 | H22 | GB/T 4160-1984 | 钢的应变时效敏感性试验方法 (夏比冲击法) | Steel--strain ageing sensibility test (Charpy impact method) | |
77.040.10 | H22 | GB/T 4161-1984 | 金属材料平面应变断裂韧度 Kic试验方法 | Standard test method for plane-strain fracture toughness of metallic materials | |
77.040.20 | H26 | GB/T 4162-1991 | 锻轧钢棒超声波检验方 | Forged and rolled steel bars?Method for ultrasonic examination | |
77.120 | H25 | GB/T 4164-1984 | 金属粉末中可被氢还原氧含量的测定 | Metallic powders--Determination of hydrogen reducible oxygen content | |
77.140.20 | H40 | GB/T 4171-2000 | 高耐候结构钢 | Superior atmospheric corrosion resisting structural steel | |
77.140.20 | H40 | GB/T 4172-2000 | 焊接结构用耐候钢 | Atmospheric corrosion resisting steel for welded structure | |
77.080 | H63 | GB/T 4183-1984 | 钼钨合金丝 | Molybdenum-tungsten alloy wires | |
77.080 | H63 | GB/T 4184-1984 | 钨铼合金丝 | Tungsten rhenium alloy wires | |
77.080 | H63 | GB/T 4185-1984 | 钼钨合金条 | Molybdenum-tungsten alloy bars | |
77.080 | H63 | GB/T 4186-1984 | 钼钨合金杆 | Molybdenum-tungsten alloy rods | |
77.080 | H63 | GB/T 4187-1984 | 钨杆 | Tungsten rods | |
77.080 | H63 | GB/T 4188-1984 | 钼杆 | Molybdenum rods | |
77.080 | H63 | GB/T 4189-1984 | 掺杂钨条 | Doped tungsten bars | |
77.080 | H63 | GB/T 4190-1984 | 掺杂钼条 | Doped molybdenum bars | |
77.040 | H21 | GB/T 4192-1984 | 电真空器件及电光源用钨、钼材料电阻率的测试方法 | Method for the determination of the resistivity of tungsten and molybdenum used in electric light sources and vacuumtubes | |
77.040.30 | H21 | GB/T 4193-1984 | 电真空器件及电光源用细钨丝、钼丝和薄带密度的测试方法 | Method for measuring the density of the fine wire and ribbon of tungsten and molybdenum used in electric light sources and vacuumtubes | |
77.040.30 | H23 | GB/T 4194-1984 | 钨丝蠕变试验、高温处理及金相检查方法 | Creep testing, high temperature treatment and metallographic examination of the tungsten wires | |
77.040.30 | H21 | GB/T 4195-1984 | 钨钼粉末粒度分布测试方法 (沉降天平法) | Method for measuring the distribution of the powder size of tungsten and molybdenum method by th balance for the fall of the particles | |
77.040.30 | H21 | GB/T 4196-1984 | 钨钼条密度测定方法 | Method for testing the density of tungsten and molybdenum bars | |
77.040.30 | H23 | GB/T 4197-1984 | 钨钼及其合金的烧结坯条、棒材晶粒度测试方法 | Method for measuring the average grain size of sintered bar and rod of tungsten molybdenum and alloys | |
ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) | 国際整合 |
77.080.20 | H41 | GB/T 4223-1996 | 废钢铁 | Iron and steel scraps | |
77.140.60 | H44 | GB/T 4226-1984 | 不锈钢冷加工钢棒 | Cold finished stainless steel bars | NEQ JIS G4318-81 |
77.140.70 | H44 | GB/T 4227-1984 | 不锈钢热轧等边角钢 | Hot rolled stainless steel with equal leg angles | NEQ JIS G4317-81 |
77.140.50 | H46 | GB/T 4229-1984 | Methods of weight calculation of stainless steel plates and sheets | Methods of weight calculation of stainless steel plates and sheets | NEQ JIS G4310-81 |
77.140.60 | H46 | GB/T 4231-1993 | 弹簧用不锈钢冷轧钢带 | Cold rolled stainless steel strips for springs | NEQ JIS G 4313-88 |
77.140.60 | H49 | GB/T 4232-1993 | 冷顶锻用不锈钢丝 | Stainless steel wires for cold heading and cold for- ging | NEQ JIS G 4315-88 |
77.140.20 | H40 | GB 4234-1994 | 外科植入物用不锈钢 | Stainless steel for surgical implants | |
77.040.30 | H23 | GB/T 4236-1984 | 钢的硫印检验方法 | Steel--Examination by sulphur print (Baumann method) | EQV ISO 4968-79 |
77.140.50 | H46 | GB/T 4237-1992 | 不锈钢热轧钢板 | Hot rolled stainless steel sheets and plates | NEQ JIS G4304-84 |
77.140.50 | H46 | GB/T 4238-1992 | 耐热钢板 | Heat-resisting steel sheets and plates | NEQ JIS G4312 |
77.140.60 | H46 | GB/T 4239-1991 | 不锈钢和耐热钢冷轧钢带 | Cold rolled stainless steel and heatresisting steel strips | |
77.140.60 | H49 | GB/T 4240-1993 | 不锈钢丝 | Stainless steel wires | NEQ JIS G 4309-88 |
77.140.60 | H44 | GB/T 4241-1984 | 焊接用不锈钢盘条 | Stainless steel wire rods for welding | NEQ JIS G4316-81 |
77.120 | H61 | GB/T 4292-1999 | 氟化铝 | Aluminium fluoride | |
77.120.70 | H71 | GB/T 4295-1993 | 碳化钨粉 | Tungsten carbide powder | |
77.040.30 | H24 | GB/T 4296-1984 | 镁合金加工制品显微组织检验方法 | Magnesium alloy wrought products--Microstructure--Inspection method | |
77.040.30 | H23 | GB/T 4297-1984 | 镁合金加工制品低倍组织检验方法 | Magnesium alloy wrought products--macrostructure--inspection method | |
77.140.80 | H72 | GB/T 4308-1984 | 金属陶瓷热挤压模坯 | Cermet hot extrusion die blank | |
77.160 | H70 | GB/T 4309-1984 | 粉末冶金材料分类和牌号表示方法 | Classification and designation for powder metallurgy materials | |
77.120.70 | H63 | GB/T 4310-1984 | 钒 | Vanadium | |
77.080 | H14 | GB/T 4324.1-1984 | 钨化学分析方法 方波极谱法连续测定铅、镉量 | Methods for chemical analysis of tungsten--The square wave polarographic method for the successive determination of lead and cadmium contents | |
77.080 | H14 | GB/T 4324.2-1984 | 钨化学分析方法 碘化钾- 马钱子碱光度法测定铋量 | Methods for chemical analysis of tungsten--The pota ssium iodide-brucine photometric method for the determination of bismuth content | |
77.080 | H14 | GB/T 4324.3-1984 | 钨化学分析方法 聚乙二醇辛基苯基醚-苯荧光酮光度法测定锡量 | Methods for chemical analysis of tungsten--The polyethylene glycol octyl phenylether-phenylfluorone photometric method for the determination of tin content | |
77.080 | H14 | GB/T 4324.4-1984 | 钨化学分析方法 孔雀绿光度法测定锑量 | Methods for chemical analysis of tungsten--The malachite green photometric method for the determination of antimony content | |
77.080 | H14 | GB/T 4324.5-1984 | 钨化学分析方法 钼蓝光度法测定砷量 | Methods for chemical analysis of tungsten--The molybdenum blue photometric method for the determination of arsenic content | |
77.080 | H14 | GB/T 4324.6-1984 | 钨化学分析方法 邻二氮杂菲光度法测定铁量 | Methods for chemical analysis of tungsten--The ortho-phenanthroline photometric method for the determination iron content | |
77.080 | H14 | GB/T 4324.7-1984 | 钨化学分析方法 钴试剂光度法测定钴量 | Methods for chemical analysis of tungsten--The 5-cl-PADAB photometric method for the determination of cobalt content | |
77.080 | H14 | GB/T 4324.8-1984 | 钨化学分析方法 丁二酮肟光度法测定镍量 | Methods for chemical analysis of tungsten--The dimethylglyoxime photometric method for the determination of nickel content | |
77.080 | H14 | GB/T 4324.9-1984 | 钨化学分析方法 丁二酮肟重量法测定镍量 | Methods for chemical analysis of tungsten--The dimethylglyoxime gravimetric method for the determination of nickel content | |
77.080 | H14 | GB/T 4324.10-1984 | 钨化学分析方法 新酮试剂光度法测定铜量 | Methods for chemical analysis of tungsten--The neocuproine photometric method for the determination of copper content | |
77.080 | H14 | GB/T 4324.11-1984 | 钨化学分析方法 铬天青S光度法测定铝量 | Methods for chemical analysis of tungsten--The chromazurol S photometric method for the determination of aluminium content | |
77.080 | H14 | GB/T 4324.12-1984 | 钨化学分析方法 氯化-钼蓝光度法测定硅量 | Methods for chemical analysis of tungsten--The chlorization- molybdenum blue photometric method for the determination of silicon content | |
77.080 | H14 | GB/T 4324.13-1984 | 钨化学分析方法 乙二醛双 (2-羟基苯胺) 光度法测定钙量 | Methods for chemical analysis of tungsten--The glyoxal bis (2-hydroxyanil) photometric method for the determination of calcium content | |
77.080 | H14 | GB/T 4324.14-1984 | 钨化学分析方法 原子吸收分光光度法测定钙量 | Methods for chemical analysis of tungsten--The atomic absorption spectrophotometric method for the determination of calcium content | |
77.080 | H14 | GB/T 4324.15-1984 | 钨化学分析方法 偶氮氯膦I 光度法测定镁量 | Methods for chemical analysis of tungsten--The chlorophosphonazoT photometric method for the determination of magnesium content | |
77.080 | H14 | GB/T 4324.16-1984 | 钨化学分析方法 原子吸收分光光度法测定镁量 | Methods for chemical analysis of tungsten--The atomic absorption spectrophotometric method for the determination of magnesium content | |
77.080 | H14 | GB/T 4324.17-1984 | 钨化学分析方法 原子吸收分光光度法测定钠量 | Methods for chemical analysis of tungsten--The atomic absorption spectrophotometric method for the determination of sodium content | |
77.080 | H14 | GB/T 4324.18-1984 | 钨化学分析方法 原子吸收分光光度法测定钾量 | Methods for chemical analysis of tungsten--The atomic absorption spectrophotometric method for the determination of potassium content | |
77.080 | H14 | GB/T 4324.19-1984 | 钨化学分析方法 二安替比林甲烷光度法测定钛量 | Methods for chemical analysis of tungsten--The diantipyrylmethane photometric method for the determination of titanium content | |
77.080 | H14 | GB/T 4324.20-1984 | 钨化学分析方法 钽试剂光度法测定钒量 | Methods for chemical analysis of tungsten--The N-benzoyl-N-phenylhydroxylamine photometric method for the determination of vanadium content | |
77.080 | H14 | GB/T 4324.21-1984 | 钨化学分析方法 二苯基碳酰二肼光度法测定铬量 | Methods for chemical analysis of tungsten--The diphenylcarbazide photometric method for the determination of chromium content | |
77.080 | H14 | GB/T 4324.22-1984 | 钨化学分析方法 甲醛肟分光光度法测定锰量 | Methods for chemical analysis of tungsten--The formaldoxime photometric method for manganese content | |
77.080 | H14 | GB/T 4324.23-1984 | 钨化学分析方法 燃烧-电导法测定硫量 | Methods for chemical analysis of tungsten--The combustion-conductometric titration method for the determination of suphur content | |
77.080 | H14 | GB/T 4324.24-1984 | 钨化学分析方法 铍为载带沉淀剂- 钼蓝光度法测定磷量 | Methods for chemical analysis of tungsten--The berylium as carrier precipitation agent-molybdenum blue photometric method for the determination of phosphorus content | |
77.080 | H14 | GB/T 4324.25-1984 | 钨化学分析方法 惰气熔融库仑滴定法测定氧量 | Methods for chemical analysis of tungsten--The inert gas fusion-coulometric titration method for the determination of oxygen content | |
77.080 | H14 | GB/T 4324.26-1984 | 钨化学分析方法 奈氏试剂光度法测定氮量 | Methods for chemical analysis of tungsten--The Nessler reagent photometric method for the determination of nitrogen content | |
77.080 | H14 | GB/T 4324.27-1984 | 钨化学分析方法 燃烧-库仑滴定法测定碳量 | Methods for chemical analysis of tungsten--The combustion-coulometric titration method for the determination of carbon content | |
77.080 | H14 | GB/T 4324.28-1984 | 钨化学分析方法 硫氰酸盐光度法测定钼量 | Methods for chemical analysis of tungsten--The thiocy anate photometric method for the determination of molybdenum content | |
77.080 | H14 | GB/T 4324.29-1984 | 钨化学分析方法 重量法测定氯化挥发后残渣量 | Methods for chemical analysis of tungsten--The gravimetric method for the determination of residue content after chloride volatility | |
77.080 | H14 | GB/T 4324.30-1984 | 钨化学分析方法 重量法测定灼烧损失量 | Methods for chemical analysis of tungsten--The gravimetric method for the determination of loss content on ignition | |
77.080 | H14 | GB/T 4325.1-1984 | 钼化学分析方法 方波极谱法连续测定铅、镉量 | Methods for chemical analysis of molybdenum--The square wave polarographic method for the successive determination of lead and cadmium content | |
77.080 | H14 | GB/T 4325.2-1984 | 钼化学分析方法 碘化钾- 马钱子碱光度法测定铋量 | Methods for chemical analysis of molybdenum--The potassium iodide-Brucine photometric method for the determination of bismuth content | |
77.080 | H14 | GB/T 4325.3-1984 | 钼化学分析方法 聚乙二醇辛基苯基醚-苯荧光酮光度法测定锡量 | Methods for chemical analysis of molybdenum--The polyethylene glycol octyl phenylether-phenylfluorone photometric method for the determination of tin content | |
77.080 | H14 | GB/T 4325.4-1984 | 钼化学分析方法 孔雀绿光度法测定锑量 | Methods for chemical analysis of molybdenum--The malachite green photometric method for the determination of antimony content | |
77.080 | H14 | GB/T 4325.5-1984 | 钼化学分析方法 钼蓝光度法测定砷量 | Methods for chemical analysis of molybdenum--The molybdenum blue photometric method for the determination of arsenic content | |
77.080 | H14 | GB/T 4325.6-1984 | 钼化学分析方法 邻二氮杂菲光度法测定铁量 | Methods for chemical analysis of molybdenum--The ortho-phenanthroline photometric method for the determination of iron content | |
77.080 | H14 | GB/T 4325.7-1984 | 钼化学分析方法 钴试剂光度法测定钴量 | Methods for chemical analysis of molybdenum--The 5-Cl-PADAB photometric method for the determination of cobalt content | |
77.080 | H14 | GB/T 4325.8-1984 | 钼化学分析方法 丁二酮肟光度法测定镍量 | Methods for chemical analysis of molybdenum--The dimethylglyoxime photometric method for the determination of nickel content | |
77.080 | H14 | GB/T 4325.9-1984 | 钼化学分析方法 丁二酮肟重量法测定镍量 | Methods for chemical analysis of molybdenum--The dimethylglyoxime gravimetric method for the determination of nickel content | |
77.080 | H14 | GB/T 4325.10-1984 | 钼化学分析方法 新酮试剂光度法测定铜量 | Methods for chemical analysis of molybdenum--The neocuproin photometric method for the determination of copper content | |
77.080 | H14 | GB/T 4325.11-1984 | 钼化学分析方法 铬天青S光度法测定铝量 | Methods for chemical analysis of molybdenum--The chromazurol S photometric method for the determination of aluminum content | |
77.080 | H14 | GB/T 4325.12-1984 | 钼化学分析方法 氯化- 钼蓝光度法测定硅量 | Methods for chemical analysis of molybdenum--The chlorization-molybdenum blue photometric method for the determination of silicon content | |
77.080 | H14 | GB/T 4325.13-1984 | 钼化学分析方法 乙二醛双(2-羟基苯胺)光度法测定钙量 | Methods for chemical analysis of molybdenum--The glyoxal bis (2-hydroxyanil) photometric method for the determination of calcium content | |
77.080 | H14 | GB/T 4325.14-1984 | 钼化学分析方法 原子吸收分光光度法测定钙量 | Methods for chemical analysis of molybdenum--The atomic absorption spectrophotometric method for the determination of calcium content | |
77.080 | H14 | GB/T 4325.15-1984 | 钼化学分析方法 偶氮氯膦I光度法测定镁量 | Methods for chemical analysis of molybdenum--The chlorophosphonazo T photometric method for the determination of magnesium content | |
77.080 | H14 | GB/T 4325.16-1984 | 钼化学分析方法 原子吸收分光光度法测定镁量 | Methods for chemical analysis of molybdenum--The atomic absorption spectrophotometric method for the determination of magnesium content | |
77.080 | H14 | GB/T 4325.17-1984 | 钼化学分析方法 原子吸收分光光度法测定钠量 | Methods for chemical analysis of molybdenum--The atomic absorption spectrophotometric method for the determination of sodium content | |
77.080 | H14 | GB/T 4325.18-1984 | 钼化学分析方法 原子吸收分光光度法测定钾量 | Methods for chemical analysis of molybdenum--The atomic absorption spectrophotometric method for the determination of potassium content | |
77.080 | H14 | GB/T 4325.19-1984 | 钼化学分析方法 二安替比林甲烷光度法测定钛量 | Methods for chemical analysis of molybdenum--The diantipyrylmethane photometric method for the determination of titanium content | |
77.080 | H14 | GB/T 4325.20-1984 | 钼化学分析方法 钽试剂光度法测定钒量 | Methods for chemical analysis of molybdenum--The N-benzoyl-N-phenylhydroxylamine photometric method for the determination of vanadium content | |
77.080 | H14 | GB/T 4325.21-1984 | 钼化学分析方法 二苯基碳酰二肼光度法测定铬量 | Methods for chemical analysis of molybdenum--The diphenylcarbazide photometric method for the determination of chromium content | |
77.080 | H14 | GB/T 4325.22-1984 | 钼化学分析方法 甲醛肟光度法测定锰量 | Methods for chemical analysis of molybdenum--The formaldoxime photometric method for the determination of manganese content | |
77.080 | H14 | GB/T 4325.23-1984 | 钼化学分析方法 燃烧-电导法测定硫量 | Methods for chemical analysis of molybdenum--The combustion-conductometric titration method for the determination of sulphur content | |
77.080 | H14 | GB/T 4325.24-1984 | 钼化学分析方法 钼蓝光度法测定磷量 | Methods for chemical analysis of molybdenum--The molybdenum blue photometric method for the determination of phosphorus content | |
77.080 | H14 | GB/T 4325.25-1984 | 钼化学分析方法 惰气熔融库仑滴定法测定氧量 | Methods for chemical analysis of molybdenum--The inert gas fusion-coulometric titration method for the determination of oxygen content | |
77.080 | H14 | GB/T 4325.26-1984 | 钼化学分析方法 奈氏试剂光度法测定氮量 | Methods for chemical analysis of molybdenum--The Nessler reagent photometric method for the determination of nitrogen content | |
77.080 | H14 | GB/T 4325.27-1984 | 钼化学分析方法 燃烧-库仑滴定法测定碳量 | Methods for chemical analysis of molybdenum--The combustion-coulometric titration method for the determination of carbon content | |
77.080 | H14 | GB/T 4325.28-1984 | 钼化学分析方法 四苯砷氯盐酸盐- 硫氰酸盐光度法测定钨量 | Methods for chemical analysis of molybdenum--The tetraphenyl arsonium chloride hydrochloride-thiocyanate photometric method for the determination of tungsten content | |
77.100 | H11 | GB/T 4333.1-1984 | 硅铁化学分析方法 高氯酸脱水重量法测定硅量 | Methods for chemical analysis of ferrosilicon--The perchloric acid dehydration-gravimetric method for the determination of silicon content | |
77.100 | H11 | GB/T 4333.2-1988 | 硅铁化学分析方法 铋磷钼蓝光度法测定磷量 | Methods for chemical analysis of ferrosilicon--The reduced molybdobismuthylphosphoric acid photometric method for the determination of phosphorus content | |
77.100 | H11 | GB/T 4333.3-1988 | 硅铁化学分析方法 高碘酸钾光度法测定锰量 | Methods for chemical analysis of ferrosilicon--The potassium periodate photometric method for the determination of manganese content | |
77.100 | H11 | GB/T 4333.4-1988 | 硅铁化学分析方法 铬天青S光度法测定铝量 | Methods for chemica analysis of ferrosilicon--The chromazurol S photometric method for the determination of aluminium content | NEQ JIS G1312-77 |
77.100 | H11 | GB/T 4333.5-1997 | 硅铁化学分析方法EDTA容量法测定铝量 | Methods for chemical analysis of ferrosilicon-the EDTA velumetric method for the determination of aluminium content | NEQ JIS G1312:1989 |
77.100 | H11 | GB/T 4333.6-1988 | 硅铁化学分析方法 二苯基碳酰二肼光度法测定铬量 | Methods for chemical analysis of ferrosilicon--The diphenylcarbazide photometric method for the determi nation of chromium content | NEQ ΓOCT 13230.6-81 |
77.100 | H11 | GB/T 4333.7-1984 | 硅铁化学分析方法 色层分离硫酸钡重量法测定硫量 | Methods for chemical analysis of ferrosilicon--The chromatographic separation-barium sulfate gravimetric method for the determination of sulfur content | |
77.100 | H11 | GB/T 4333.8-1988 | 硅铁化学分析方法 原子吸收光谱法测定钙量 | Methods for chemical analysis of ferrosilicon--The atomic absorption spectrometric method for the determination of calcium content | NEQ ΓOCT 13230.8-81 |
77.100 | H11 | GB/T 4333.9-1988 | 硅铁化学分析方法 火焰原子吸收光谱法测定铝量 | Methods for chemical analysis of ferrosilicon--The flame atomic absorption spectrometric method for the determination of aluminium content | EQV ISO 4139-79 |
77.100 | H11 | GB/T 4333.10-1990 | 硅铁化学分析方法 红外线吸收法测定碳量 | Methods for chemical analysis of ferrosilicon - The infrared absorption method for the determination of carbon content | NEQ ASTM E1019-85 |
77.040.99 | H25 | GB/T 4334.1-2000 | 不锈钢10%草酸浸蚀试验方法 | Method of 10 per cent oxalic acid etch test for stainless steels | EQV JIS G 0571:1980 |
77.040.99 | H25 | GB/T 4334.2-2000 | 不锈钢硫酸 硫酸铁腐蚀试验方法 | Method of ferric sulfate-sulfuric acid test for stainless steels | EQV JIS G 0572:1984 |
77.040.99 | H25 | GB/T 4334.3-2000 | 不锈钢65%硝酸腐蚀试验方法 | Method of 65 per cent nitric acid test for stainless steels | EQV JIS G 0573:1980 |
77.040.99 | H25 | GB/T 4334.4-2000 | 不锈钢硝酸 氢氟酸腐蚀试验方法 | Method of nitric-hydrofluoric acid test for stainless steels | NEQ JIS G 0574:1980 |
77.040.99 | H25 | GB/T 4334.5-2000 | 不锈钢硫酸 硫酸铜腐蚀试验方法 | Method of copper sulfate-sulfuric acid test for stainless steels | NEQ JIS G0575:1980 |
77.040.99 | H25 | GB/T 4334.6-2000 | 不锈钢5%硫酸腐蚀试验方法 | Method of 5 per cent sulfuric acid test for stainless steels | EQV JIS G 0591:1980 |
77.040.30 | H23 | GB/T 4335-1984 | 低碳钢冷轧薄板铁素体晶粒度测定法 | Cold rolled low-carbon steel sheet--Ferrite grain size--Test methods | |
77.080.20 | H11 | GB/T 4336-1984 | 碳素钢和中低合金钢的光电发射光谱分析方法 | Method for photoelectric emission spectroscopic analy sis of carbon steel,medium and low alloy steel | |
77.040.10 | H22 | GB/T 4337-1984 | 金属旋转弯曲疲劳试验方法 | Metals--Rotating bar bending fatigue testing | |
77.040.10 | H22 | GB/T 4338-1995 | 金属材料 高温拉伸试验 | Metallic materials--Tensile testing at elevated temperature | EQV ISO 738-1989 |
77.040.01 | H21 | GB/T 4339-1999 | 金属材料热膨胀特征参数的测定 | Testing method for thermal expansion characteristic parameters of metallic materials | NEQ ASTM E 228-1995 |
77.040.10 | H22 | GB/T 4340.1-1999 | 金属维氏硬度试验 第1部分:试验方法 | Metallic Vickers hardness test-Part 1: Test method | EQV ISO 6507-1:1997 |
77.040.10 | H22 | GB/T 4340.2-1999 | 金属维氏硬度试验 第2部分: 硬度计的检验 | Metallic vickers hardness test--Part 2: Verification of hardness testers | IDT ISO 6507-2:1997 |
77.040.10 | H22 | GB/T 4340.3-1999 | 金属维氏硬度试验 第3部分: 标准硬度块的标定 | Metallic vickers hardness test--Part 3: Calibration of hardness reference blocks | IDT ISO 6507-3:1997 |
77.040.10 | H22 | GB/T 4341-2001 | 金属肖氏硬度试验方法 | Metallic materials--Shore hardness test | EQV JIS Z2246:1992 |
77.140.60 | H44 | GB/T 4354-1994 | 优质碳素钢热轧盘条 | Hot-rolled quality carbon steel wire rods | NEQ ISO 8457-2-89 |
77.140.60 | H44 | GB/T 4356-1984 | 不锈钢盘条 | Stainless steel wire rods | NEQ JIS G4308-81 |
77.140.60 | H49 | GB/T 4357-1989 | 碳素弹簧钢丝 | Carbon spring steel wires | NEQ JIS G3521-84 |
77.140.60 | H49 | GB/T 4358-1995 | 重要用途碳素弹簧钢丝 | Carbon spring steel wire for significant use | EQV JIS G3522-91 |
77.120.70 | H64 | GB/T 4369-1984 | 锂 | Lithium | |
77.120.70 | H64 | GB/T 4370-1984 | 高纯锂 | High pure lithium | |
77.120.20 | H12 | GB/T 4374.1-1984 | 镁粉和铝镁合金粉化学分析方法 新铜试剂萃取光度法测定铜量 | Methods for chemical analysis of magnesium powders and aluminium-magnesium alloy powders--The neocuproine-extraction photometric method for the determination of copper content | |
77.120.20 | H12 | GB/T 4374.2-1984 | 镁粉和铝镁合金粉化学分析方法 1, 10-二氮杂菲光度法测定铁量 | Methods for chemical analysis of magnesium powders and aluminium-magnesium alloy powders--The 1,10-phenan throline photometric method for the determination of iron content | |
77.120.20 | H12 | GB/T 4374.3-1984 | 镁粉和铝镁合金粉化学分析方法 钼蓝光度法测定硅量 | Methods for chemical analysis of magnesium powders and aluminium-magnesium alloy powders--The molybdenum blue photometric method of the determination of silicon content | |
77.120.20 | H12 | GB/T 4374.4-1984 | 镁粉和铝镁合金粉化学分析方法 氟化物置换络合滴定法测定铝量 | Methods for chemical analysis of magnesium powders and aluminium-magnesium alloy powders--The fluoride replacement-complexometric method for the determination of aluminium content | |
77.120.20 | H12 | GB/T 4374.5-1984 | 镁粉和铝镁合金粉化学分析方法 丙酮- 氯化银浊度法测定氯量 | Methods for chemical analysis of magnesium powders and aluminium-magnesium alloy powders--The acetone-silver chloride turbidimetric method for the determination of chlorine content | |
77.120.20 | H12 | GB/T 4374.6-1984 | 镁粉和铝镁合金粉化学分析方法 重量法测定湿存水量 | Methods for chemical analysis of magnesium powders and aluminium-magnesium alloy powders--The gravimetric method for the determination of hygroscopic moisture content | |
77.120.20 | H12 | GB/T 4374.7-1984 | 镁粉和铝镁合金粉化学分析方法 重量法测定盐酸不溶物量 | Methods for chemical analysis of magnesium powders and aluminium-magnesium alloy powders--The gravimetric method for the determination of insoluble content in hydrochloric acid | |
77.120.20 | H12 | GB/T 4374.8-1984 | 镁粉和铝镁合金粉化学分析方法 气体容量法测定活性镁及活性铝镁量 | Methods for chemical analysis of magnesium powders and aluminium-magnesium alloy powders--The gasometric method for the determination of active magnesium and active aluminium-magnesium contents | |
77.120.70 | H14 | GB/T 4375.1-1984 | 镓化学分析方法 2,9-二甲基-4,7-二苯基-1,10- 二氮杂菲光度法测定铜量 | Methods for chemical analysis of gallium--The 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline photometric method for the determination of copper content | |
77.120.70 | H14 | GB/T 4375.2-1984 | 镓化学分析方法 4-(2-吡啶偶氮) -间苯二酚光度法测定铅量 | Methods for chemical analysis of gallium--The 4-(2-pyridylazo)-resorcinol photometric method for the determination of lead content | |
77.120.70 | H14 | GB/T 4375.3-1984 | 镓化学分析方法 铬天青S-溴化十四烷基吡啶光度法测定铝量 | Methods for chemical analysis of gallium--The chromazurol S-tetradecyl pyridine bromide photometric method for the determination of aluminum content | |
77.120.70 | H14 | GB/T 4375.4-1984 | 镓化学分析方法 4,7-二苯基-1,10-二氮杂菲光度法测定铁量 | Methods for chemical analysis of gallium--The 4,7-diphenyl-1,10-phenanthroline photometric method for the determination of iron content | |
77.120.70 | H14 | GB/T 4375.5-1984 | 镓化学分析方法 一氧化二氮-乙炔火焰原子吸收分光光度法测定钙量 | Methods for chemical analysis of gallium--The N2O-C2H2 flame atomic absorption spectrophotometric method for the determination of calcium content | |
77.120.70 | H14 | GB/T 4375.6-1984 | 镓化学分析方法 水杨基荧光酮-溴化十六烷基三甲基铵光度法测定锡量 | Methods for chemical analysis of gallium--The salicylfluorone cetyltrimethylammonium bromide photometric method for the determination of tin content | |
77.120.70 | H14 | GB/T 4375.7-1984 | 镓化学分析方法 钼蓝光度法测定硅量 | Methods for chemical analysis of gallium--The molybdenum blue photometric method for the determination of silicon content | |
77.120.70 | H14 | GB/T 4375.8-1984 | 镓化学分析方法 乙基紫光度法测定铟量 | Methods for chemical analysis of gallium--The ethyl violet photometric method for the determination of indium content | |
77.120.70 | H14 | GB/T 4375.9-1984 | 镓化学分析方法 苯基荧光酮-聚乙二醇辛基苯基醚光度法测定锗量 | Methods for chemical analysis of gallium--The phenylfluorone-polyethylene glycol octyl phenyl ether photometric method for the determination of germanium content | |
77.120.70 | H14 | GB/T 4375.10-1984 | 镓化学分析方法 原子吸收分光光度法测定锌量 | Methods for chemical analysis of gallium--The atomic absorption spectrophotometric method for the determination of zinc content | |
77.120.70 | H14 | GB/T 4375.11-1984 | 镓化学分析方法 冷原子吸收分光光度法测定汞量 | Methods for chemical analysis of gallium--The cold vapor atomic absorption spectrophotometric method for the determination of mercury content | |
77.120.70 | H14 | GB/T 4375.12-1984 | 镓化学分析方法 化学光谱法测定铅、铜、镍、铝、铟和锌量 | Methods for chemical analysis of gallium--The spectro-chemical method for the determination of lead, copper,nickel, aluminum, indium and zinc contents | |
ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) | 国際整合 |
77.120.30 | H62 | GB/T 4423-1992 | 铜及铜合金拉制棒 | Wrought copper and copper alloys--Drawn rods and bars | NEQ ISO 1637-87 |
77.120.30 | H62 | GB/T 4427-1984 | 黄铜矩形棒 | Brass rectangular bars | NEQ ISO 1637-87 |
77.120.30 | H62 | GB/T 4428-1984 | 铅黄铜针座棒 | Leaded brass bar for making needle seat of syringe | NEQ DIN 17660-74 |
77.120.40 | H62 | GB/T 4435-1984 | 镍及镍铜合金棒 | Nickel and nickel-copper alloys round bars | NEQ ASTM B160-81 |
77.120.10 | H61 | GB/T 4438-1984 | 铝及铝合金波纹板 | Aluminium and aluminium alloy corrugated sheets | NEQ JIS H4010-82 |
77.120 | H46 | GB/T 4461-1992 | 热双金属带材 | Thermostatic bimetal strips | |
77.040.30 | H23 | GB/T 4462-1984 | 高速工具钢大块碳化物评级图 | Standard figure of coarse carbide of high speed tool steel | |
77.140.60 | H44 | GB 4463-1984 | 预应力混凝土用热处理钢筋 | Heat-treated steel bar for prestressed concrete | |
77.140.70 | H44 | GB/T 4697-1991 | 矿山巷道支护用热轧U 型钢 | Hot-rolled U-type steel for mine timbering | |
77.120.50 | H14 | GB/T 4698.1-1996 | 海绵钛、钛及钛合金化学分析方法 铜试剂分光光度法测定铜量 | Sponge titanium, titanium and titanium alloys--Determination of copper content--Diethyldithiocarbamate spectrophotometric method | |
77.120.50 | H14 | GB/T 4698.2-1996 | 海绵钛、钛及钛合金化学分析方法 1,10-二氮杂菲分光光度法测定铁量 | Sponge titanium,titanium and titanium alloys--Determination of iron content--1,10-Phenanthroline spectrophotometric method | |
77.120.50 | H14 | GB/T 4698.3-1996 | 海绵钛、钛及钛合金化学分析方法 钼蓝分光光度法测定硅量 | Sponge titanium, titanium and titanium alloys--Determination of silicon content--Molybdenum blue spectrophotometric method | |
77.120.50 | H14 | GB/T 4698.4-1996 | 海绵钛、钛及钛合金化学分析方法 高碘酸盐分光光度法测定锰量 | Sponge titanium, titanium and titanium alloys--Determination of manganese content--Potassium periodate spectrophotometric method | |
77.120.50 | H14 | GB/T 4698.5-1996 | 海绵钛、钛及钛合金化学分析方法 硫氰酸盐分光光度法测定钼量 | Sponge titanium, titanium and titanium alloys--Determination of molybdenum content--Thiocyanate spectrophotometric method | |
77.120.50 | H14 | GB/T 4698.6-1996 | 海绵钛、钛及钛合金化学分析方法 次甲基蓝萃取分光光度法测定硼量 | Sponge titanium, titanium and titanium alloys--Determination of boron content--Extraction-methylene blue spectrophotometric method | |
77.120.50 | H14 | GB/T 4698.7-1996 | 海绵钛、钛及钛合金化学分析方法 蒸镏分离-奈斯勒试剂分光光度法测定氮量 | Sponge titanium, titanium and titanium alloys--Determination of nitrogen content--Distillation-Nessler reagent spectrophotometric method | |
77.120.50 | H14 | GB/T 4698.8-1996 | 海绵钛、钛及钛合金化学分析方法 碱分离-EDTA络合滴定法测定铝量 | Sponge titanium, titanium and titanium alloys--Determination of aluminum content--Separation with sodium hydroxide-EDTA complexometric titration method | |
77.120.50 | H14 | GB/T 4698.9-1996 | 海绵钛、钛及钛合金化学分析方法 碘酸钾滴定法测定锡量 | Sponge titanium, titanium and titanium alloys--Determination of tin content--Potassium iodate titration method | |
77.120.50 | H14 | GB/T 4698.10-1996 | 海绵钛、钛及钛合金化学分析方法 硫酸亚铁铵滴定法测定铬量(含钒) | Sponge titanium, titanium and titanium alloys--Determination of chromium content in the presence of Vanadium--Ammonium ferrous sulfate titration method | |
77.120.50 | H14 | GB/T 4698.11-1996 | 海绵钛、钛及钛合金化学分析方法 硫酸亚铁铵滴定法测定铬量(不含钒) | Sponge titanium, titanium and titanium alloys--Determination of chromium content in the absence of Vanadium--Ammonium ferrous sulfate titration method | |
77.120.50 | H14 | GB/T 4698.12-1996 | 海绵钛、钛及钛合金化学分析方法 硫酸亚铁铵滴定法测定钒量 | Sponge titanium, titanium and titanium alloys--Determination of vanadium content--Ammonium ferrous sulfate titration method | |
77.120.50 | H14 | GB/T 4698.13-1996 | 海绵钛、钛及钛合金化学分析方法 EDTA络合滴定法测定锆量 | Sponge titanium, titanium and titanium alloys--Determination of zirconium content--EDTA complexometric titration method | |
77.120.50 | H14 | GB/T 4698.14-1996 | 海绵钛、钛及钛合金化学分析方法 库仑法测定碳量 | Sponge titanium, titanium and titanium alloys--Determination of carbon content--Combustion coulometric method | |
77.120.50 | H14 | GB/T 4698.15-1996 | 海绵钛、钛及钛合金化学分析方法 真空加热气相色谱法测定氢量 | Sponge titanium, titanium and titanium alloys--Determination of hydrogen content--Vacuum heating gas gas chromatographic method | |
77.120.50 | H14 | GB/T 4698.16-1996 | 海绵钛、钛及钛合金化学分析方法 惰气熔融库仑法测定氧量 | Sponge titanium, titanium and titanium alloys--Determination of oxygen content--Inert gas fusion coulometric method | |
77.120.50 | H14 | GB/T 4698.17-1996 | 海绵钛、钛及钛合金化学分析方法 火焰原子吸收光谱法测定镁量 | Sponge titanium, titanium and titanium alloys--Determination of magnesium content--Flame atomic absorption spectrometric method | |
77.120.50 | H14 | GB/T 4698.18-1996 | 海绵钛、钛及钛合金化学分析方法 火焰原子吸收光谱法测定锡量 | Sponge titanium, titanium and titanium alloys--Determination of tin content--Flame atomic absorption spectrometric method | |
77.120.50 | H14 | GB/T 4698.19-1996 | 海绵钛、钛及钛合金化学分析方法 硫氰酸盐示差分光光度法测定钼量 | Sponge titanium, titanium and titanium alloys--Determination of molybdenum content--Thiocyanate differential spectrophotometric method | |
77.120.50 | H14 | GB/T 4698.20-1996 | 海绵钛、钛及钛合金化学分析方法 高碘酸钾分光光度法测定锰量 | Sponge titanium, titanium and titanium alloys--Determination of manganese content--Potassium periodate spectrophotometric method | |
77.120.50 | H14 | GB/T 4698.21-1996 | 海绵钛、钛及钛合金化学分析方法 发射光谱法测定锰、铬、镍、铝、钼、锡、钒、钇、铜、锆量 | Sponge titanium, titanium and titanium alloys--Determination of manganese, chromium, nickel, aluminum, molybdenum, tin, vanadium, yttrium, copper, zirconium content--Emission spectrographic method | |
77.120.50 | H14 | GB/T 4698.22-1996 | 海绵钛、钛及钛合金化学分析方法 5-Br-PADAP分光光度法测量铌量 | Sponge titanium, titanium and titanium alloys--Determination of niobium content-2-(5-Bromo-2-pyridylazo)-5--Diethylaminophenol spectrophotometric method | |
77.120.50 | H14 | GB/T 4698.23-1996 | 海绵钛、钛及钛合金化学分析方法 氯化亚锡-碘化钾分光光度法测定钯量 | Sponge titanium, titanium and titanium alloys--Determination of palladium content--Stannous choride--Potassium iodide spectrophotometric method | |
77.120.50 | H14 | GB/T 4698.24-1996 | 海绵钛、钛及钛合金化学分析方法 丁二酮肟分光光度法测定镍量 | Sponge titanium, titanium and titanium alloys--Determination of nickel content--Dimethylglyoxime spectrophotometric method | |
77.120.50 | H14 | GB/T 4698.25-1996 | 海绵钛、钛及钛合金化学分析方法 硫化银分光光度法测定氯量 | Sponge titanium, titanium and titanium alloys--Determination chlorine content--Silver sulfide spectrophotometric method | |
77.120.40 | H17 | GB/T 4699.1-1984 | 硅铬合金化学分析方法 重量法测定硅量 | Methods for chemical analysis of silicochromium--The gravimetric method for the determination of silicon content | IDT ISO 4158-78 |
77.120.40 | H17 | GB/T 4699.2-1984 | 硅铬合金化学分析方法 碱熔- 过硫酸铵氧化容量法测定铬量 | Methods for chemical analysis of silicochromium--The alkaline fusion-ammonium persulfate oxidation volumetric method for the determination of chromium content | EQV JIS G1325-78 |
77.120.40 | H17 | GB/T 4699.3-1984 | 硅铬合金化学分析方法 钼蓝光度法测定磷量 | Methods for chemical analysis of silicochromium--The molybdenum blue photometric method for the determination of phosphorus content | EQV JIS G1325-78 |
77.120.40 | H11 | GB/T 4699.4-1988 | 硅铬合金化学分析方法 红外线吸收法测定碳量 | Methods for chemical analysis of silicochromium--The infrared absorption method for the determination of carbon content | |
77.120.40 | H11 | GB/T 4699.6-1988 | 硅铬合金化学分析方法 红外线吸收法测定硫量 | Methods for chemical analysis of silicochromium--The infrared absorption method for the determination of sulfur content | |
77.120.40 | H11 | GB/T 4699.7-1988 | 硅铬合金化学分析方法 燃烧中和滴定法测定硫量 | Methods for chemical analysis of silicochromium--The combustion-neutralization titration method for the determination of sulfur content | |
77.120.70 | H17 | GB/T 4700.1-1984 | 硅钙合金化学分析方法 高氯酸脱水重量法测定硅量 | Methods for chemical analysis of calcium-silicon--The perchloric acid dehydration-gravimetric method for the determination of silicon content | EQV JIS G1325-77 |
77.120.70 | H11 | GB/T 4700.2-1988 | 硅钙合金化学分析方法 EDTA滴定法测定钙量 | Methods for chemical analysis of calcium-silicon--The EDTA titrimetric method for the determination of calcium content | EQV JIS G1324-77 |
77.120.70 | H17 | GB/T 4700.3-1984 | 硅钙合金化学分析方法 EDTA滴定法测定铝量 | Methods for chemical analysis of calcium-silicon--The EDTA titrimetric method for the determination of aluminium content | EQV ΓOCT 14858-81 |
77.040.30 | H17 | GB/T 4700.4-1998 | 硅钙合金化学分析方法 磷钼蓝分光光度法测定磷量 | Methods for chemical analysis of calcium-silicon The phosphomolybdenum blue photometric method for the determination of phosphorus content | |
77.040.30 | H17 | GB/T 4700.5-1998 | 硅钙合金化学分析方法 红外线吸收法测定碳量 | Methods for chemical analysis of calcium-silicon The infrared absorption method for the determination of carbon content | |
77.040.30 | H17 | GB/T 4700.7-1998 | 硅钙合金化学分析方法 红外线吸收法和燃烧碘酸钾滴定法测定硫量 | Methods for chemical analysis of calcium-silicon The infrared absorption method and the combustion-potassium iodate titration method for the determination of sulfur content | |
77.100 | H11 | GB/T 4701.1-1984 | 钛铁化学分析方法 硫酸铁铵容量法测定钛量 | Methods for chemical analysis of ferrotitanium--The ammonium ferric sulfate volumetric method for the determination of titanium content | IDT ISO 7692-83 |
77.100 | H11 | GB/T 4701.2-1984 | 钛铁化学分析方法 重量法测定硅量 | Methods for chemical analysis of ferrotitanium--The gravimetric method for the determination of silicon content | EQV JIS G1319-82 |
77.100 | H11 | GB/T 4701.3-1984 | 钛铁化学分析方法 铜试剂光度法测定铜量 | Methods for chemical analysis of ferrotitanium--The DDTC photometric method for the determination of copper content | |
77.100 | H11 | GB/T 4701.4-1984 | 钛铁化学分析方法 过硫酸盐- 亚砷酸盐容量法测定锰量 | Methods for chemical analysis of ferrotitanium--The persulfate-arsenite volumetric method for the determination of manganese content | EQV JIS G1319-68 |
77.100 | H11 | GB/T 4701.5-1984 | 钛铁化学分析方法 高碘酸盐光度法测定锰量 | Methods for chemical analysis of ferrotitanium--The periodate photometric method for the determination of manganese content | EQV JIS G1319-82 |
77.100 | H11 | GB/T 4701.6-1984 | 钛铁化学分析方法 8-羟基喹啉容量法测定铝量 | Methods for chemical analysis of ferrotitanium--The 8-hydroxylquinoline volumetric method for the determination of aluminium content | EQV JIS G1319-68 |
77.100 | H11 | GB/T 4701.7-1985 | 钛铁化学分析方法 钼蓝分光光度法测定磷量 | Methods for chemical analysis of ferrotitanium--The molybdenum blue spectrophotometric method for the determination of phosphorus content | EQV JIS G1319-82 |
77.100 | H11 | GB/T 4701.8-1988 | 钛铁化学分析方法 红外线吸收法测定碳量 | Methods for chemical analysis of ferrotitanium--The infrared absorption method for the determination of carbon content | |
77.100 | H11 | GB/T 4701.10-1988 | 钛铁化学分析方法 红外线吸收法测定硫量 | Methods for chemical analysis of ferrotitanium--The infrared absorption method for the determination of sulfur content | |
77.100 | H11 | GB/T 4701.11-1988 | 钛铁化学分析方法 燃烧中和滴定法测定硫量 | Methods for chemical analysis of ferrotitanium--The combustion-neutralization titration method for the determination of sulfur content | |
77.120.40 | H11 | GB/T 4702.1-1997 | 金属铬化学分析方法 硫酸亚铁铵容量法测定铬量 | Methods for chemical analysis of chromium metal The ammonium ferrous sulfate volumetric method for the determination of chromium content | NEQ JIS G 1323:1978 |
77.120.40 | H11 | GB/T 4702.2-1984 | 金属铬化学分析方法 高氯酸脱水重量法测定硅量 | Methods for chemical analysis of chromium metal--The perchloric acid dehydration-gravimetric method for the determination of silicen content | EQV JIS G1323-78 |
77.120.40 | H11 | GB/T 4702.3-1984 | 金属铬化学分析方法 钼蓝光度法测定磷量 | Methods for chemical analysis of chromium metal--The molybdenum blue photometric method for the determination of phosphorus content | EQV JIS G1323-78 |
77.120.40 | H11 | GB/T 4702.4-1984 | 金属铬化学分析方法 EDTA容量法测定铁量 | Methods for chemical analysis of chromium metal--The EDTA volumetric method for the determination of iron content | EQV JIS G1323-78 |
77.120.40 | H11 | GB/T 4702.5-1984 | 金属铬化学分析方法 原子吸收分光光度法测定铝量 | Methods for chemical analysis of chromium metal--The atomic absorption spectrophotometric method for the determination of aluminium content | EQV JIS G1323-78 |
77.120.40 | H11 | GB/T 4702.6-1984 | 金属铬化学分析方法 EDTA容量法测定铝量 | Methods for chemical analysis of chromium metal--The EDTA volumetric method for the determination of aluminium content | EQV JIS G1323-78 |
77.120.40 | H11 | GB/T 4702.7-1984 | 金属铬化学分析方法 原子吸收分光光度法测定铁量 | Methods for chemical analysis of chromium metal--The atomic absorption spectrophotometric method for the determination of iron content | EQV JIS G1323-78 |
77.120.40 | H11 | GB/T 4702.8-1985 | 金属铬化学分析方法 蒸馏- 钼蓝分光光度法测定砷量 | Methods for chemical analysis of chromium metal--The distillation-molybdenum blue spectrophotometric method for the determination of arsenic content | EQV ΓOCT 13020.12-75 |
77.120.40 | H11 | GB/T 4702.9-1985 | 金属铬化学分析方法 结晶紫分光光度法测定锑量 | Methods for chemical analysis of chromium metal--The crystal violet spectrophotometric method for the determination of antimony content | EQV ΓOCT 13020.13-75 |
77.120.40 | H11 | GB/T 4702.10-1985 | 金属铬化学分析方法 铜试剂分光光度法测定铜量 | Methods for chemical analysis of chromium metal--The cupral spectrophotometric method for the determination of copper content | |
77.120.40 | H11 | GB/T 4702.11-1985 | 金属铬化学分析方法 茜素紫分光光度法测定锡量 | Methods for chemical analysis of chromium metal--The alizarin violet spectrophotometric method for the determination of tin content | EQV ΓOCT 13020.15-75 |
77.120.40 | H11 | GB/T 4702.12-1987 | 金属铬化学分析方法 示波极谱法测定铋量 | Methods for chemical analysis of chromium metal--The oscilloplarographic method for the determination of bismuth content | NEQ ΓOCT 13020.11-75 |
77.120.40 | H11 | GB/T 4702.13-1987 | 金属铬化学分析方法 示波极谱法测定铅量 | Methods for chemical analysis of chromium metal--The oscilloplarographic method for the determination of lead content | NEQ ΓOCT 13020.11-75 |
77.120.40 | H11 | GB/T 4702.14-1988 | 金属铬化学分析方法 红外线吸收法测定碳量 | Methods for chemical analysis of chromium metal--The infrared absorption method for the determination of carbon content | |
77.120.40 | H11 | GB/T 4702.16-1988 | 金属铬化学分析方法 红外线吸收法测定硫量 | Methods for chemical analysis of chromium metal--The infrared absorption method for the determination of sulfur content | |
77.120.40 | H11 | GB/T 4702.17-1988 | 金属铬化学分析方法 燃烧中和滴定法测定硫量 | Methods for chemical analysis of chromium metal--The combustion-neutralization titration method for the determination of sulfur content | |
77.120.70 | H61 | GB/T 4864-1995 | 金属钙及其制品 | Calcium metal and its products | |
77.120.70 | U09 | GB/T 4948-1985 | 铝-锌-铟系合金牺牲阳极 | Sacrificial anode of Al-Zn-In system alloy | |
77.120.70 | U09 | GB/T 4949-1985 | 铝-锌-铟系合金牺牲阳极化学分析方法 | Sacrificial anode of Al-Zn-In system alloy--Chemical analysis | |
77.120.70 | U09 | GB/T 4950-1985 | 锌-铝-镉合金牺牲阳极 | Sacrificial anode of Zn-Al-Cd alloy | |
77.120.70 | U09 | GB/T 4951-1985 | 锌-铝-镉合金牺牲阳极化学分析方法 | Sacrificial anode of Zn-Al-Cd alloy--chemical analysis | |
ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) | 国際整合 |
77.040.10 | H22 | GB/T 5027-1999 | 金属薄板和薄带塑性应变比(r值)试验方法 | Metallic materials-Sheet and strip--Determination of plastic strain ratio(r-values) | EQV ISO 10113:1991 |
77.040.10 | H22 | GB/T 5028-1999 | 金属薄板和薄带拉伸应变硬化指数(n值)试验方法 | Metallic materials--Sheet and strip--Determination of tensile strain hardening exponent(n-values) | EQV ISO 10275:1993 |
77.040.30 | H20 | GB/T 5058-1985 | 钢的等温转变曲线图的测定方法 (磁性法) | Steel--Determination of isothermal transformation diagram--Magnetic method | |
77.040.30 | H71 | GB/T 5060-1985 | 金属粉末松装密度的测定 第二部分: 斯柯特容量计法 | Metallic powders--Determination of apparent density--Part 2: Scott volumeter method | EQV ISO 3923/2-81 |
77.160 | H16 | GB/T 5061-1998 | 金属粉末松装密度的测定 第三部分: 振动漏斗法 | Metallic powders--Determination of apparent density Part 3: Oscillating funnel method | |
77.080.20 | H43 | GB 5068-1999 | 铁路机车、车辆车轴用钢 | Axles steel for railway locomotive and wagons | NEQ ГOCT 4728:1996 |
77.120.30 | H13 | GB/T 5120.1-1995 | 粗铜化学分析方法 铜量的测定 | Methods for chemical andlysis of blister copper--Determination of copper content | NEQ JIS M8125-1976 |
77.120.30 | H13 | GB/T 5120.2-1995 | 粗铜化学分析方法 砷量的测定 | Methods for chemical andlysis of blister copper--Determination of arsenic content | NEQ JIS M8125-1976 |
77.120.30 | H13 | GB/T 5120.3-1995 | 粗铜化学分析方法 金和银量的测定 | Methods for chemical andlysis of blister copper--Determination of gold and silver contents | NEQ JIS M8125-1976 |
77.120.30 | H13 | GB/T 5120.4-1995 | 粗铜化学分析方法 铅、铋、锑量的测定 | Methods for chemical andlysis of blister copper--Determination of Lead, Bismuth and Antimony contents | NEQ JIS M8125-1976 |
77.120.30 | H13 | GB/T 5120.5-1985 | 粗铜化学分析方法 原子吸收分光光度法测定铋量 | Methods for chemical analysis of bessemer copper--The flame atomic abaorption spectrophotometric method for the determination of bismuth content | |
77.120.30 | H13 | GB/T 5120.6-1985 | 粗铜化学分析方法 原子吸收分光光度法测定铅量 | Methods for chemical analysis of bessemer copper--The flame atomic absorption spectrophotometric method for the determination of lead content | |
77.120.30 | H13 | GB/T 5121.1-1996 | 铜及铜合金化学分析方法 铜量的测定 | Copper and copper alloys--Determination of copper content | |
77.120.30 | H13 | GB/T 5121.2-1996 | 铜及铜合金化学分析方法 磷量的测定 | Copper and copper alloys--Determination of phosphorus content | |
77.120.30 | H13 | GB/T 5121.3-1996 | 铜及铜合金化学分析方法 铅量的测定 | Copper and copper alloys--Determination of lead content | |
77.120.30 | H13 | GB/T 5121.4-1996 | 铜及铜合金化学分析方法 碳、硫量的测定 | Copper and copper alloys--Determination of carbon and sulfur content | |
77.120.30 | H13 | GB/T 5121.5-1996 | 铜及铜合金化学分析方法 镍量的测定 | Copper and copperr alloys--Determination of nickl content | |
77.120.30 | H13 | GB/T 5121.6-1996 | 铜及铜合金化学分析方法 铋量的测定 | Copper and copperr alloys--Determination of bismuth content | |
77.120.30 | H13 | GB/T 5121.7-1996 | 铜及铜合金化学分析方法 砷量的测定 | Copper and copper alloys--Determination of arsenic content | |
77.120.30 | H13 | GB/T 5121.8-1996 | 铜及铜合金化学分析方法 氧量的测定 | Copper and copper alloys--Determination of oxygen content | |
77.120.30 | H13 | GB/T 5121.9-1996 | 铜及铜合金化学分析方法 铁量的测定 | Copper and copper alloys--Determination of iron content | |
77.120.30 | H13 | GB/T 5121.10-1996 | 铜及铜合金化学分析方法 锡量的测定 | Copper and copper alloys--Determination of tin content | |
77.120.30 | H13 | GB/T 5121.11-1996 | 铜及铜合金化学分析方法 锌量的测定 | Copper and copper alloys--Determination of zinc content | |
77.120.30 | H13 | GB/T 5121.12-1996 | 铜及铜合金化学分析方法 锑量的测定 | Copper and copper alloys--Determination of antimony content | |
77.120.30 | H13 | GB/T 5121.13-1996 | 铜及铜合金化学分析方法 铝量的测定 | Copper and copper alloys--Determination of aluminium content | |
77.120.30 | H13 | GB/T 5121.14-1996 | 铜及铜合金化学分析方法 锰量的测定 | Copper and copper alloys--Determination of manganese content | |
77.120.30 | H13 | GB/T 5121.15-1996 | 铜及铜合金化学分析方法 钴量的测定 | Copper and copper alloys--Determination of cobalt content | |
77.120.30 | H13 | GB/T 5121.16-1996 | 铜及铜合金化学分析方法 铬量的测定 | Copper and copperr alloys--Determination of chromium content | |
77.120.30 | H13 | GB/T 5121.17-1996 | 铜及铜合金化学分析方法 铍量的测定 | Copper and copper alloys--Determination of beryllium content | |
77.120.30 | H13 | GB/T 5121.18-1996 | 铜及铜合金化学分析方法 镁量的测定 | Copper and copper alloys--Determination of magnesium content | |
77.120.30 | H13 | GB/T 5121.19-1996 | 铜及铜合金化学分析方法 银量的测定 | Copper and copper alloys--Determination of silver content | |
77.120.30 | H13 | GB/T 5121.20-1996 | 铅及铜合金化学分析方法 锆量的测定 | Copper and copper alloys--Determination of zirconium content | |
77.120.30 | H13 | GB/T 5121.21-1996 | 铜及铜合金化学分析方法 钛量的测定 | Copper and copper alloys--Determination of titanium content | |
77.120.30 | H13 | GB/T 5121.22-1996 | 铜及铜合金化学分析方法 镉量的测定 | Copper and copper alloys--Determination of cadmium content | |
77.120.30 | H13 | GB/T 5121.23-1996 | 铜及铜合金化学分析方法 硅量的测定 | Copper and copper alloys--Determination of silicon content | |
77.120.30 | H13 | GB/T 5122.2-1985 | 黄铜化学分析方法 电解分离- EDTA滴定法测定铅量 | Methods for chemical analysis of brass--The electrolytic separation-EDTA titrimetric method for the determination of lead content | |
77.120.30 | H13 | GB/T 5122.8-1985 | 黄铜化学分析方法 铬天青S光度法测定铍量 | Methods for chemical analysis of brass--The chromazurol S photometric method for the determination of beryllium content | |
77.120.30 | H13 | GB/T 5122.13-1985 | 黄铜化学分析方法 铬天青S 光度法测定铝量 | Methods for chemical analysis of brass--The chromazurol S photometric method for the determination of aluminum content | |
77.120.40 | H13 | GB/T 5123-1985 | 镍的光谱分析方法 | Nickel--Method of spectral analysis | EQV ΓOCT 6012-76 |
77.160 | H10 | GB/T 5124.1-1985 | 硬质合金化学分析方法 重量法测定总碳量 | Methods for chemical analysis of hardmetals--The gravimetric method for the determination of total carbon content | EQV ISO 3907-77 |
77.160 | H10 | GB/T 5124.2-1985 | 硬质合金化学分析方法 重量法测定游离 (不溶) 碳量 | Methods for chemical analysis of hardmetals--The gravimetric method for the determination of free(insoluble) carbon content | EQV ISO 3908-76 |
77.160 | H10 | GB/T 5124.3-1985 | 硬质合金化学分析方法 电位滴定法测定钴量 | Methods for chemical analysis of hardmetals--The potentiometric method for the determination of cobalt content | EQV ISO 3909-76 |
77.160 | H10 | GB/T 5124.4-1985 | 硬质合金化学分析方法 过氧化物光度法测定钛量 | Methods for chemical analysis of hardmetals--The photometric peroxide method for the determination of titanium content | EQV ISO 4501-78 |
77.040.10 | H60 | GB/T 5125-1985 | 有色金属冲杯试验方法 | Method for deep drawing cups testing of non-ferrous metals | EQV DIN 50155-81 |
77.040.20 | H26 | GB/T 5126-2001 | 铝及铝合金冷拉薄壁管材涡流探伤方法 | Eddy current inspection method for cold drawn ahin eall tubes of aluninum and aluminum alloy | |
77.120.20 | H71 | GB 5149-1985 | 镁粉 | Magnesium powder | NEQ MIL-M-362-78 |
77.120.10 | H71 | GB/T 5150-1985 | 铝镁合金粉 | Aluminum-magnesium alloy,powdered | NEQ JAN-M-454 |
77.120.20 | H61 | GB/T 5153-1985 | 加工镁及镁合金牌号和化学成分 | Designation and composition of wrought magnesium and magnesium alloys | NEQ ΓOCT 14957-76 |
77.120.20 | H61 | GB/T 5154-1985 | 镁合金板 | Magnesium alloy sheets | NEQ ΓOCT 22635-77 |
77.120.20 | H61 | GB/T 5155-1985 | 镁合金热挤压棒 | Magnesium alloy extruded rods | NEQ ΓOCT 18251-73 |
77.120.20 | H61 | GB/T 5156-1985 | 镁合金热挤压型材 | Magnesium alloy extruded profiles | NEQ ΓOCT 19657-74 |
77.040.30 | H71 | GB/T 5157-1985 | 金属粉末粒度分布的测定--沉降天平法 | Metallic powders--Determination of particle size distribution by method of sedimentation balance | NEQ DIN 66111 |
77.120 | H71 | GB/T 5158-1999 | 金属粉末 在氢中还原时质量损失的测定(氢损) | Metallic powders--Determination of loss of mass on hydrogen reduction (hydrogen loss) | NEQ ISO 4491-2:1997 |
77.160 | H71 | GB/T 5158.4-2001 | 金属粉末 总氧含量的测定 还原-提取法 | Metallic powders--Determination of total oxygen content by reduction-extraction | IDT ISO 4491-4:1989(E) |
77.040.10 | H71 | GB/T 5159-1985 | 金属粉末 (不包括硬质合金用粉) 与成型和烧结有联系的尺寸变化的测定方法 | Metallic powders, excluding powders for hardmetals--Determination of dimensional changes associated with compacting and sintering | EQV ISO 4492-85 |
77.040.10 | H71 | GB/T 5160-1985 | 金属粉末 用矩形压坯的横向断裂测定压坯强度的方法 | Metallic powders--Determination of green strength by transverse rupture of rectangular compactc | EQV ISO 3995-85 |
77.040.30 | H71 | GB/T 5161-1985 | 金属粉末 有效密度的测定 液体浸透法 | Metallic powders--Determination of effective density--Liquid immersion method | NEQ JIS R5201 |
77.040.30 | H71 | GB/T 5162-1985 | 金属粉末--振实密度的测定 | Metallic powders--Determination of tap density | NEQ ISO 3953-77 |
77.040.30 | H21 | GB/T 5163-1985 | 可渗性烧结金属材料--密度的测定 | Permeable sintered metal materials--Determination of density | EQV ISO 2738-87 |
77.040.30 | H21 | GB/T 5164-1985 | 可渗性烧结金属材料--开孔率的测定 | Permeable sintered metal materials--Determination of open porosity | EQV ISO 2738-87 |
77.160 | H21 | GB/T 5165-1985 | 可渗性烧结金属材料--含油率的测定 | Permeable sintered metal materials--Determination of oil content | EQV ISO 2737-73 |
77.040.10 | H21 | GB/T 5166-1998 | 烧结金属材料和硬质合金弹性模量测定 | Sintered metal materials and hardmetals--Determination of young's modulus | IDT ISO 3312:1987 |
77.040 | H21 | GB/T 5167-1985 | 烧结金属材料和硬质合金电阻率的测定 | Sintered metal materials and hardmetals--Determination of electrical resistivity | EQV ASTM B421-76 |
77.040.30 | H23 | GB/T 5168-1985 | 两相钛合金高低倍组织检验方法 | α-βTitanium alloys--Examination of structure | |
77.120.30 | H62 | GB/T 5187-1985 | 纯铜箔 | Copper foil | NEQ ΓOCT 5638-75 |
77.120.30 | H62 | GB/T 5188-1985 | 黄铜箔 | Brass foil | |
77.120.30 | H62 | GB/T 5189-1985 | 青铜箔 | Bronze foil | |
77.120.30; | H62 | GB/T 5190-1985 | 镍及白铜箔 | Nickel and nickel silver foil | |
77.120.60 | H62 | GB/T 5191-1985 | 锡、铅及其合金箔和锌箔 | Tin and tin alloy foil, lead and lead alloy foil Zinc foil | NEQ ΓOCT 18394-73 |
77.040.20 | H24 | GB/T 5193-1985 | 钛及钛合金加工产品超声波探伤方法 | Method of ultrasonic inspection for wrought titanium and titanium alloys products | EQV AMS 2631 |
ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) | 国際整合 |
77.140.50 | Q53 | GB/T 5212-1985 | 电工用热轧硅钢薄钢板 | Hot rolled silicon steel sheets for electrical grade | |
77.140.50 | H46 | GB/T 5213-2001 | 深冲压用冷轧薄钢板及钢带 | Cold rolled sheets and strips for deep drawing | NEQ DIN EN 10130:1991 |
77.080.20 | H40 | GB/T 5216-1985 | 保证淬透性结构钢技术条件 | Technical requirements for structural steel with specified hardenability bands | NEQ ASTM A304-79 |
77.140.65 | H49 | GB/T 5218-1999 | 合金弹簧钢丝 | Alloy spring steel wires | NEQ ASTM A231/A231M:1991 |
77.140.60 | H49 | GB/T 5222-1985 | 弹簧垫圈用梯形钢丝 | Trapezed steel wire for spring washer | |
77.140.60 | H49 | GB/T 5223-1995 | 预应力混凝土用钢丝 | Steel wires for prestressed concrete | NEQ ISO 6934/3-1991(E) |
77.140.60 | H49 | GB/T 5224-1995 | 预应力混凝土用钢铰线 | Steel strand for prestressed concrete | EQV ISO 6934/1-1991(E) |
77.040.30 | H21 | GB/T 5225-1985 | 金属材料定量相分析 X射线衍射K值法 | Metal materials--Quantitative phase analysis--"Value K"method of X-ray diffraction | |
77.120.30 | H62 | GB/T 5230-1995 | 电解铜箔 | Electrodeposited copper foil | |
77.150.30 | H62 | GB/T 5231-2001 | 加工铜及铜合金化学成分和产品形状 | Wrought copper and copper alloys chemical composition limits and forms of wrought products | |
77.120.40 | H62 | GB/T 5235-1985 | 加工镍及镍合金--化学成分和产品形状 | Wrought nickels and nickel alloys--Chemical composition and forms of wrought products | |
77.120.10 | H61 | GB/T 5237.1-2000 | 铝合金建筑型材 第1部分: 基材 | Wrought aluminum alloy extruded profiles for architecture Part 1: Untreated profiles | |
77.120.10 | H61 | GB/T 5237.2-2000 | 铝合金建筑型材 第2部分 阳极氧化、着色型材 | Wrought aluminum alloy extruded profiles for architecture Part 2: Anodized colored profiles | |
77.120.10 | H61 | GB/T 5237.3-2000 | 铝合金建筑型材 第3部分: 电泳涂漆型材 | Wrought aluminum alloy extruded profiles for architecture Part 3: Electrophoretic coating profiles | |
77.120.10 | H61 | GB/T 5237.4-2000 | 铝合金建筑型材 第4部分 粉末喷涂型材 | Wrought aluminium alloy extruded profiles for architecture Part 4: Powder coating profiles | |
77.120.10 | H61 | GB/T 5237.5-2000 | 铝合金建筑型材 第5部分: 氟碳漆喷涂型材 | Wrought aluminum alloy extruded profiles for architecture Part 5: PVDF coating profiles | |
77.040 | H72 | GB/T 5242-1985 | 硬质合金制品检验规则与试验方法 | Check rules and test methods of cemented carbide products | |
77.160 | H72 | GB/T 5243-1985 | 硬质合金制品的标志、包装、运输和贮存 | Marking, packing, transport and storage of cemented carbide products | |
77.120.30 | H71 | GB/T 5246-1985 | 电解铜粉 | Electrolytic copper powder | NEQ JIS H2114-83 |
77.120.40 | H71 | GB/T 5247-1985 | 电解镍粉 | Electrolytic nickel powder | NEQ ΓOCT 9722-79 |
77.120.30 | H13 | GB/T 5248-1998 | 铜及铜合金无缝管涡流探伤方法 | Copper and copper alloy-seamless tubes-eddy current testing method | EQV ASTM E243-90 |
77.160 | H21 | GB/T 5249-1985 | 可渗透性烧结金属材料 气泡试验 孔径的测定 | Permeable sintered metal materials--Determination of bubble test pore size | EQV ISO 4003-77 |
77.160 | H21 | GB/T 5250-1993 | 可渗透烧结金属材料 流体渗透性的测定 | Permeable sintered metal materials--Determination of fluid permeability | IDT ISO 4022-1987 |
77.140.75 | H48 | GB/T 5312-1999 | 船舶用碳钢和碳锰钢无缝钢管 | Carbon and carbon-manganese steel seamless steel tubes and pipes for ship | NEQ 英国劳埃コ船级社船舶入级规范:97 |
77.140.50 | H46 | GB/T 5313-1985 | 厚度方向性能钢板 | Steel plate with through-thickness characteristics | EQV ISO 7778-83 |
77.040 | H70 | GB/T 5314-1985 | 粉末冶金用粉末的取样方法 | Powders for powder metallurgical purposes--Sampling | EQV ISO 3954-77 |
77.040.10 | H71 | GB/T 5318-1985 | 烧结金属材料 (不包括硬质合金) 无切口冲击试样 | Sintered metals materials, excluding hard metals--Unnotched impact test piece | IDT ISO 5754-80 |
77.040.10 | H71 | GB/T 5319-1985 | 烧结金属材料 (不包括硬质合金) 横向断裂强度的测定方法 | Sintered metal materials, excluding hard metals--Determination of transverse rupture strength | IDT ISO 3325-75 |
77.040.10 | U05 | GB/T 5482-1993 | 金属材料动态撕裂试验方法 | Metallic materials--Dynamic tear testing method | NEQ ASTM E 604-83 |
77.080.10 | H41 | GB/T 5612-1985 | 铸铁牌号表示方法 | Code for representing cast iron | |
77.080.10 | J31 | GB/T 5613-1995 | 铸钢牌号表示方法 | Code for representing cast steels | |
77.140.80 | J31 | GB/T 5614-1985 | 铸铁件热处理状态的名称、定义及代号 | The designations definitions and symbols for heat treatment tempers of iron castings | |
77.140.80 | J31 | GB/T 5615-1985 | 铸钢件热处理状态的名称、定义及代号 | The designations, definitions and symbols for heat treatment tempers of steel castings | |
77.040.20 | H24 | GB/T 5616-1985 | 常规无损探伤应用导则 | Guidelines for application of conventional nondestructive testing methods | |
77.040.30 | H22 | GB/T 5617-1985 | 钢的感应淬火或火焰淬火后有效硬化层深度的测定 | Determination of effective depth of hardening after induction or flame hardening of steel | EQV ISO 3754-76 |
77.080.20 | J31 | GB/T 5676-1985 | 一般工程用铸造碳钢 | Cast carbon steels for general engineering purposes | |
77.040.20 | J31 | GB/T 5677-1985 | 铸钢件射线照相及底片等级分类方法 | Methods of radiographic testing and classification of radiographs for steel castings | NEQ JCSS G2 |
77.040.10 | J31 | GB/T 5678-1985 | 铸造合金光谱分析取样方法 | The method for sampling cast alloys for spectrochemical analysis | |
77.140.80 | J31 | GB/T 5680-1998 | 高锰钢铸件 | Austenitic manganese steel castings | |
77.100 | H42 | GB/T 5682-1995 | 硼铁 | Ferroboron | NEQ JIS G318-1986 |
77.100 | H42 | GB/T 5683-1987 | 铬铁 | Ferrochromium | NEQ ASTM A101-80 |
77.100 | H42 | GB/T 5684-1987 | 真空法微碳铬铁 | Vacuum extra low carbon ferrochromium | NEQ ASTM A101-85 |
77.080 | H11 | GB/T 5686.1-1988 | 锰硅合金化学分析方法 电位滴定法测定锰量 | Methods for chemical analysis of silicomanganese alloy--The potentiometric titration method for the determination of manganese content | EQV ISO 4159-78 |
77.080 | H11 | GB/T 5686.2-1985 | 锰硅合金化学分析方法 重量法测定硅量 | Methods for chemical analysis of silicomanganese alloy--The gravimetric method for the determination of silicon content | EQV ISO 4158-78 |
77.080.01 | H11 | GB/T 5686.4-1998 | 锰硅合金化学分析方法 磷钼蓝分光光度法测定磷量 | Methods for chemical analysis of silicomanganese The phosphomolybdenum blue phtometric method for the determination of phosphorus content | EQV JIS G 1314-1987 |
77.080 | H11 | GB/T 5686.5-1988 | 锰硅合金化学分析方法 红外线吸收法测定碳量 | Methods for chemical analysis of silicomanganese alloy--The infrared absorption method for the determination of carbon content | |
77.080 | H11 | GB/T 5686.6-1988 | 锰硅合金化学分析方法 气体容量法测定碳量 | Methods for chemical analysis of silicomanganese alloy--The gasometric method for the determination of carbon content | |
77.080 | H11 | GB/T 5686.7-1988 | 锰硅合金化学分析方法 红外线吸收法测定硫量 | Methods for chemical analysis of silicomanganese alloy--The infrared absorption method for the determination of sulfur content | |
77.080 | H11 | GB/T 5686.8-1988 | 锰硅合金化学分析方法 燃烧中和滴定法测定硫量 | Methods for chemical analysis of silicomanganese alloy--The combustion-neutralization titration method for the determination of sulfur content | |
77.100 | H11 | GB/T 5687.1-1985 | 铬铁化学分析方法 过硫酸铵氧化容量法测定铬量 | Methods for chemical analysis of ferrochromium--The ammonium persulfate oxidation volumetric method for the determination of chromium content | EQV JIS G1313-78 |
77.100 | H11 | GB/T 5687.2-1985 | 铬铁化学分析方法 重量法测定硅量 | Methods for chemical analysis of ferrochromium--The gravimetric method for the determination of silicon content | EQV JIS G1313-78 |
77.100 | H11 | GB/T 5687.3-1985 | 铬铁化学分析方法 钼蓝光度法测定磷量 | Methods for chemical analysis of ferrochromium--The molybdenum blue photometric method for the determination of phosphorus content | EQV JIS G1313-78 |
77.100 | H11 | GB/T 5687.4-1985 | 铬铁化学分析方法 中和滴定法测定氮量 | Methods for chemical analysis of ferrochromium--The neutralization titration method for the determination of nitrogen content | EQV JIS G1313-78 |
77.100 | H11 | GB/T 5687.5-1988 | 铬铁化学分析方法 红外线吸收法测定碳量 | Methods for chemical analysis of ferrochromium--The infrared absorption method for the determination of carbon content | |
77.100 | H11 | GB/T 5687.6-1988 | 铬铁化学分析方法 库仑法测定碳量 | Methods for chemical analysis of ferrochromium--The coulometric method for the determination of carbon content | |
77.100 | H11 | GB/T 5687.7-1988 | 铬铁化学分析方法 重量法测定碳量 | Methods for chemical analysis of ferrochromium--The gravimetric method for the determination of carbon content | |
77.100 | H11 | GB/T 5687.8-1988 | 铬铁化学分析方法 红外线吸收法测定硫量 | Methods for chemical analysis of ferrochromium--The infrared absorption method for the determination of sulfur content | |
77.100 | H11 | GB/T 5687.9-1988 | 铬铁化学分析方法 燃烧中和滴定法测定硫量 | Methods for chemical analysis of ferrochromium--The combustion-neutralization titration method for the determination of sulfur content | |
77.120.10 | H61 | GB/T 5774-1986 | 铝包镍复合粉 | Aluminum-coated nickel composite powders | |
77.060 | H25 | GB/T 5776-1986 | 金属材料在表面海水中常规暴露腐蚀试验方法 | Method for surface seawater exposure corrosion tests of metallic materials | NEQ ASTM G52-76 |
77.040.20 | H26 | GB/T 5777-1996 | 无缝钢管超声波探伤检验方法 | Seamless steel pipe and tubing--Methods for ultrasonic testing | EQV ISO 9303-1989 |
77.040.20 | H23 | GB/T 5778-1986 | 膨胀合金气密性试验方法 | Determination of hermeticity of expansion alloys | NEQ ASTM F78-79 |
77.120.10 | H12 | GB/T 5871-1986 | 铝及铝合金摄谱光谱分析方法 | Method for spectrographic analysis of aluminium and its alloys | NEQ ΓOCT 7727-81 |
77.140.60 | H49 | GB/T 5952-1986 | 碳素工具钢丝 | Carbon tool steel wires | NEQ ΓOCT 5468-60 |
77.140.65 | H49 | GB/T 5953-1999 | 冷镦钢丝 | Steel wires for cold heading | NEQ JIS G3539:1991 |
77.040.10 | H21 | GB/T 5985-1986 | 热双金属弯曲常数测量方法 | Test method for flexivity constant of thermostat metals | NEQ JIS G2530-75 |
77.040.10 | H21 | GB/T 5986-2000 | 热双金属弹性模量试验方法 | Test method for modulus of elasticity of thermostat metals | EQV ASTM B 223:1985(1991年确认) |
77.040.10 | H21 | GB/T 5987-1986 | 热双金属温曲率试验方法 | Test method for flexivity of thermostat metals | NEQ ASTM B106-78 |
ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) | 国際整合 |
77.040 | H21 | GB/T 6146-1985 | 精密电阻合金电阻率测试方法 | Test method for resistivity of precision resistance alloys | NEQ IEC 60468-78 |
77.040 | H21 | GB/T 6147-1985 | 精密电阻合金热电动势率测试方法 | Test method for thermoelectric power of precision resistance alloys | NEQ JIS G2527 |
77.040 | H21 | GB/T 6148-1985 | 精密电阻合金电阻温度系数测试方法 | Test method for temperature-resistance coefficient of precision resistance alloys | NEQ ASTM B84-81 |
77.120.30 | H59 | GB/T 6149-1985 | 新康铜电阻合金 | New constantan resistance alloy | NEQ IEC 60182/4-71 |
77.040.10 | J31 | GB/T 6296-1986 | 灰铸铁冲击试验方法 | Grey cast iron impact test | EQV ISO 946-75 |
77.040.30 | U05 | GB/T 6384-1986 | 船舶及海洋工程用金属材料在天然环境中的海水腐蚀试验方法 | The testing methods for seawater corrosion in natural environment of metallic materials for ship and offshore structures | NEQ ANSI/ASTM 52-76 |
77.040 | H22 | GB/T 6396-1995 | 复合钢板力学及工艺性能试验方法 | Clad plates--Machanical and technological test | NEQ ASTM A 264-90 |
77.040.10 | H22 | GB/T 6397-1986 | 金属拉伸试验试样 | Metallic materials--Test pieces for tensile testing | |
77.040.10 | H22 | GB/T 6398-2000 | 金属材料疲劳裂纹扩展速率试验方法 | Standard test method for fatigue crack growth rates of metallic materials | EQV ASTM E647:1995 |
77.040.10 | H22 | GB/T 6400-1986 | 金属丝材和铆钉的高温剪切试验方法 | High temperature shear test method for metals wires and rivets | |
77.040.30 | H23 | GB/T 6401-1986 | 铁素体奥氏体型双相不锈钢中α- 相面积含量金相测定法 | Micrographic method for determining area fraction of the α-phases using charts in ferritic-austenitic stainless steels | |
77.040.20 | H26 | GB/T 6402-1991 | 钢锻材超声波检验方法 | Steel forgings - Method for ultrasonic examination | NEQ JIS G587-87 |
77.140.80 | J31 | GB/T 6414-1999 | 铸件 尺寸公差与机械加工余量 | Castings--System of dimensional tolerances and machining allowances | EQV ISO 8062:1994 |
77.120.10 | L32 | GB/T 6452-1986 | 吸气用锆铝合金粉 | Zirconium-Aluminium alloy powders for getter | |
77.120.10 | L32 | GB/T 6453-1986 | 吸气用锆铝合金复合带材 | Zirconium-Aluminium alloy combined strips for getter | |
77.120.10 | L32 | GB/T 6454-1986 | 吸气用锆铝合金环件和片件 | Rings and tablets of zirconium-aluminium alloy for getter | |
77.120 | L32 | GB/T 6455-1986 | 释汞吸气用复合带材 | Mercury releasing combined strips for getter | |
77.140.10 | H44 | GB/T 6478-2001 | 冷镦和冷挤压用钢 | Steels for cold heading and cold extruding | NEQ ISO 4954-1993 |
77.140 | H48 | GB 6479-2000 | 高压化肥设备用无缝钢管 | Seamless steel tubes for high-pressure chemical fertilizer equipments | NEQ ISO 9329-2:1997(E) |
77.160 | H44 | GB/T 6480-1994 | 凿岩用硬质合金钎头 | Carbide detachable bit for rock drilling | EQV ISO 1718-1991 |
77.160 | H44 | GB/T 6481-1994 | 凿岩用锥形连接中空六角形钎杆 | Hollow hexagonal drill rods with tapered connection for rock drilling | |
77.160 | H44 | GB/T 6482-1994 | 凿岩用波形螺纹连接钎杆 | Rope thread extension steel bars for rock drilling | |
ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) | 国際整合 |
77.120.40 | H62 | GB/T 6516-1997 | 电解镍 | Electrolytic nickel | |
77.120.10 | H61 | GB/T 6519-2000 | 变形铝合金产品超声波检验方法 | Process for ultrasonic inspection of wrought aluminum alloy products | NEQ ASTM B594:1997 |
77.040.30 | H21 | GB/T 6524-1986 | 金属粉末粒度分布的测定--光透法 | Determination of particle size distribution of metallic powders by method of photosedimentation | NEQ ASTM B430-79 |
77.040.10 | H21 | GB/T 6525-1986 | 烧结金属材料室温压缩强度的测定 | Sintered metal materials--Determination of compression strength at room temperature | |
77.040.30 | H21 | GB/T 6526-1986 | 自熔合金粉末固-液相线温度区间的测定方法 | Self-fluxing alloy powders--Determination of solidus-liquidus temperature range | |
77.120.10 | H61 | GB/T 6608-1999 | 铝箔厚度的测定 称量法 | Measuring thickness of the aluminium foil-Weighing method | |
77.120.50 | H64 | GB/T 6611-1986 | 钛及钛合金术语 | Terminology for titanium and titanium alloy | NEQ SAE AS 1814 |
77.120.50 | H64 | GB/T 6612-1986 | 重要用途的TA7钛合金板材 | Titanium alloy TA7 sheet and plate for important applications | NEQ AMS 4910G |
77.120.50 | H64 | GB/T 6613-1986 | 重要用途的TC4钛合金板材 | Titanium alloy TC4 sheet and plate for important applications | NEQ AMS 4911D |
77.120.50 | H64 | GB/T 6614-1994 | 钛及钛合金铸件 | Titanium and titanium alloy castings | NEQ ASTM B367-87 |
77.140.30 | H46 | GB 6653-1994 | 焊接气瓶用钢板 | Steel plates for welded gas cylinders | NEQ JIS G3166-77 |
77.140.30 | H46 | GB 6654-1996 | 压力容器用钢板 | Steel plates for pressure vessels | |
77.140.70 | H44 | GB/T 6723-1986 | 通用冷弯开口型钢尺寸、外形、重量及允许偏差 | Cold forming sectional steel--Open sectional steel for general structure--Demension, form, weight and permissible deviations | NEQ DIN 59413-76 |
77.140.70 | H44 | GB/T 6724-1986 | 冷弯波形钢板 | Cold forming corrugated sheet | NEQ JIS G3352-79 |
77.140.70 | H44 | GB/T 6725-1992 | 冷弯型钢技术条件 | Technical requirements of cold forming sectional steel | NEQ DIN 17118-78 |
77.140.70 | H44 | GB/T 6726-1986 | 货运汽车用冷弯型钢尺寸、外形、重量及允许偏差 | Cold forming sectional steel for cargo vehicle--Demension, form, weight and permissible deviations | NEQ DIN 59413-76 |
77.140.70 | H44 | GB/T 6727-1986 | 客运汽车用冷弯型钢尺寸、外形、重量及允许偏差 | Cold forming sectional steel for passenger vehicle--Demension, form, weight and permissible deviations | NEQ DIN 59411 |
77.140.70 | H44 | GB/T 6728-1986 | 结构用冷弯空心型钢尺寸、外形、重量及允许偏差 | Cold forming sectional steel--Hollow sectional steel for general structure--Demension, form, weight and permissible deviations | NEQ DIN 59411 |
77.040.10 | H21 | GB/T 6803-1986 | 铁素体钢的无塑性转变温度落锤试验方法 | Standard method for conducting drop-weight test to determine nilductility transition temperature of ferritic steels | NEQ ASTM E208-81 |
77.040.10 | H70 | GB/T 6804-1986 | 烧结金属衬套径向压溃强度测定法 | Sintered metal bushes--Determination of radial crushing strength | EQV ISO 2739-73 |
77.160 | H59 | GB/T 6883-1995 | 线、棒和管拉模用硬质合金模坯 | Wire、bar or tube drawing dies--As sintered pellets of hardmetal | EQV ISO 2804-73 |
77.040 | H72 | GB/T 6884-1986 | 硬质合金制品--取样和试验方法 | Hardmetal products--Sampling and testing | EQV ISO 4489-78 |
77.040 | H72 | GB/T 6885-1986 | 硬质合金 混合粉取样和试验方法 | Hardmetals--Sampling and testing of mixed powder | EQV ISO 4884-78 |
77.160 | H72 | GB/T 6886-2001 | 烧结不锈钢过滤元件 | Sintered stainless steel filter elements | |
77.160 | H72 | GB/T 6887-1986 | 烧结钛过滤元件及材料 | Sintered titanium filter and filtration materials | |
77.160 | H72 | GB/T 6888-1986 | 烧结镍过滤元件 | Sintered nickel filter | |
77.160 | H72 | GB/T 6889-1986 | 烧结镍 铜合金过滤元件 | Sintered nickel-copper alloy filter | |
77.150.60 | H62 | GB/T 6890-2000 | 锌粉 | Zinc powder | |
77.120.10 | H61 | GB/T 6891-1986 | 铝及铝合金压型板 | Wrought aluminium and aluminium alloy--Vcorrugated sheet | NEQ ΓOCT 24767-81 |
77.120.10 | H61 | GB/T 6892-2000 | 工业用铝及铝合金热挤压型材 | Wrought aluminium and aluminium alloys--Extruded profiles for commercial usage | |
77.120.10 | H61 | GB/T 6893-2000 | 铝及铝合金拉(轧)制无缝管 | Aluminium and aluminium alloy cold drawn (rolled) seamless tubes | |
77.150 | H63 | GB/T 6896-1998 | 铌条 | Niobium bars | |
77.140.80 | J31 | GB/T 6967-1986 | 工程结构用中、高强度不锈钢铸件 | Medium and high strength stainless steel castings for engineering structure purposes | |
77.080.10 | H53 | GB/T 6983-1986 | 电磁纯铁棒材技术条件 | Technical requirements for magnetic iron bars | NEQ JIS C2503-75 |
77.080.10 | H53 | GB/T 6984-1986 | 电磁纯铁热轧厚板技术条件 | Technical requirements for magnetic iron hot-rolled plates | NEQ JIS C2504-75 |
77.080.10 | H53 | GB/T 6985-1986 | 电磁纯铁冷轧薄板 | Magnetic iron cold-rolled sheets | NEQ JIS C2504-75 |
77.120.10 | H62 | GB/T 6987.1-2001 | 铝及铝合金化学分析方法 电解重量法测定铜量 | Aluminium and aluminium alloys--Determination of copper content--Electrolytic grarmetric method | NEQ ISO 796-1973 |
77.120.10 | H62 | GB/T 6987.2-2001 | 铝及铝合金化学分析方法 草酰二酰肼分光光度法测定铜量 | Aluminium and aluminium alloys--Determination of copper content--Oxalyldihydrazide spectrophotometric method | NEQ ISO 795-1976 |
77.120.10 | H62 | GB/T 6987.3-2001 | 铝及铝合金化学分析方法 火焰原子吸收光谱法测定铜量 | Aluminium and aluminium alloys--Determination of copper content--Falme atomic absorption spectrometric method | NEQ ISO 3980-1977 |
77.120.10 | H62 | GB/T 6987.4-2001 | 铝及铝合金化学分析方法 邻二氮杂菲分光光度法测定铁量 | Aluminium and aluminium alloys--Determination of iron content--Orthopenanthroline photometric method | NEQ ISO 793-1973 |
77.120.10 | H62 | GB/T 6987.5-2001 | 铝及铝合金化学分析方法 重量法测定硅量 | Aluminium and aluminium alloys--Determination of silicon content--Gravimetric method | NEQ ISO 797-1973 |
77.120.10 | H62 | GB/T 6987.6-2001 | 铝及铝合金化学分析方法 钼蓝分光光度法测定硅量 | Aluminium and aluminium alloys--Determination of silicon content--Molybdenum blue spectrophotometric method | NEQ ISO 808-1973 |
77.120.10 | H62 | GB/T 6987.7-2001 | 铝及铝合金化学分析方法 高碘酸钾分光光度法测定锰量 | Aluminium and aluminium alloys--Determination of manganese content--Potassium periodate spectrophotometric method | NEQ ISO 886-1973 |
77.120.10 | H62 | GB/T 6987.8-2001 | 铝及铝合金化学分析方法 EDTA滴定法测定锌量 | Aluminium and aluminium alloys--Determination of zinc content--EDTA titrimetric method | NEQ ISO 1784-1976 |
77.120.10 | H62 | GB/T 6987.9-2001 | 铝及铝合金化学分析方法 火焰原子吸收光谱法测定锌量 | Aluminium and aluminium alloys--Determination of zinc conten--Flame atomic absorption spectrometric method | NEQ ISO 5194-1981 |
77.120.10 | H62 | GB/T 6987.10-2001 | 铝及铝合金化学分析方法 苯基荧光酮分光光度法测定锡量 | Aluminium and aluminium alloys--Determination of tin content--Phenyl fluorone spectrophotometric method | |
77.120.10 | H62 | GB/T 6987.11-2001 | 铝及铝合金化学分析方法 火焰原子吸收光谱法测定铅量 | Aluminium and aluminium alloys--Determination of lead content--Flame atomic absorption spectrometric method | NEQ ISO 4192-1981 |
77.120.10 | H62 | GB/T 6987.12-2001 | 铝及铝合金化学分析方法 二安替吡啉甲烷分光光度法测定钛量 | Aluminium and aluminium alloys--Determination of titanium content--Diantipyrylmethane spectrophotometric method | NEQ ISO 6827.12-1986 |
77.120.10 | H62 | GB/T 6987.13-2001 | 铝及铝合金化学分析方法 苯甲酰苯胲分光光度法测定钒量 | Aluminium and aluminium alloys--Determination of vanadium content--N-benzoyl-Nphenylhydroxylamine spectrophotometric method | |
77.120.10 | H62 | GB/T 6987.14-2001 | 铝及铝合金化学分析方法 丁二酮肟分光光度法测定镍量 | Aluminium and aluminium alloys--Determination of nickel content--Dimethylglyoxime spectrophotometric method | NEQ ISO 3979-1977 |
77.120.10 | H62 | GB/T 6987.15-2001 | 铝及铝合金化学分析方法 火焰原子吸收光谱法测定镍量 | Aluminium and aluminium alloys--Determination of nikel content--Flame atomic absorption spectrometric method | NEQ ISO 3981-1977 |
77.120.10 | H62 | GB/T 6987.16-2001 | 铝及铝合金化学分析方法 CDTA滴定法测定镁量 | Aluminium and aluminium alloys--Determination of magnesium content--CDTA titrimetric method | NEQ ISO 2297-1973 |
77.120.10 | H62 | GB/T 6987.17-2001 | 铝及铝合金化学分析方法 火焰原子吸收光谱法测定镁量 | Aluminium and aluminium alloys--Determination of magnesium content--Flame atomic absorption spectrometric method | NEQ ISO 3256-1977 |
77.120.10 | H62 | GB/T 6987.18-2001 | 铝及铝合金化学分析方法 火焰原子吸收光谱法测定铬量 | Aluminium and aluminium alloys--Determination of chromium content--Flame atomic absorption spectrometric method | NEQ ISO 4193-1981 |
77.120.10 | H62 | GB/T 6987.19-2001 | 铝及铝合金化学分析方法 二甲酚橙光度法测定锆量 | Aluminium and aluminium alloys--Determination of zirconium content--Xylenol orange photometric method | |
77.120.10 | H62 | GB/T 6987.20-2001 | 铝及铝合金化学分析方法 丁基罗丹明B分光光度法测定镓量 | Aluminium and aluminium alloys--Determination of gallium content--Butyrhodamine B spectrophotometric method | |
77.120.10 | H62 | GB/T 6987.21-2001 | 铝及铝合金化学分析方法 火焰原子吸收光谱法测定钙量 | Aluminium and aluminium alloys--Determination of calcium content--Flame atomic absorption spectrometric method | |
77.120.10 | H62 | GB/T 6987.22-2001 | 铝及铝合金化学分析方法 依莱铬氰兰R分光光度法测定铍量 | Aluminium and aluminium alloys--Determination of beryllium content--SCR spectrophotometric method | |
77.120.10 | H72 | GB/T 6987.23-2001 | 铝及铝合金化学分析方法 碘化钾分光光度法测定锑量 | Aluminium and aluminium alloys--Determination of antimony content--Potassium iodide spectrophotometric method | |
77.120.10 | H62 | GB/T 6987.24-2001 | 铝及铝合金化学分析方法 三溴偶氮胂分光光度法测定铈组稀土元素总量 | Aluminium and aluminium alloys--Determination of the cerium subgroup of rare earth elements content--Tribromoarsenazo spectrophotometric method | |
77.120.10 | H62 | GB/T 6987.25-2001 | 铝及铝合金化学分析方法 火焰原子吸收光谱法测定镉量 | Aluminium and aluminium alloys--Determination of cadmium content--Flame atomic absorption spectrometric method | |
77.120.10 | H62 | GB/T 6987.26-2001 | 铝及铝合金化学分析方法 火焰原子吸收光谱法测定锂量 | Aluminium and aluminium alloys--Determination of lithium content--Flame atomic absorption spectrometric method | |
77.120.10 | H62 | GB/T 6987.27-2001 | 铝及铝合金化学分析方法 离子选择电极法测定硼量 | Aluminium and aluminium alloys--Determination of boron content--Ion selective electrode method | |
77.120.10 | H62 | GB/T 6987.28-2001 | 铝及铝合金化学分析方法 火焰原子吸收光谱法测定锶量 | Aluminium and aluminium alloys--Determination of strontium content--Flame atomic absorption spectrometric method | |
77.120.10 | H62 | GB/T 6987.29-2001 | 铝及铝合金化学分析方法 新亚铜灵分光光度法测定铜量 | Aluminium and aluminium alloys--Determination of copper content-2,9-Dimethyl-1,10-phenanthroline spectrophotometric method | |
77.120.10 | H62 | GB/T 6987.30-2001 | 铝及铝合金化学分析方法 萃取分离--二苯基碳酰二肼分光光度法 测定铬量 | Aluminium and aluminium alloys--Determination of chromium content--Diphenyicarbazide spectrophotometry method after extraction | NEQ ISO 3978-1976 |
77.120.10 | H62 | GB/T 6987.31-2001 | 铝及铝合金化学分析方法 过氧化氢分光光度法测定钛量 | Aluminium and aluminium alloys--Determination of titanium content--Hydrogen peroxide spectrophotometric method | |
77.120.10 | H62 | GB/T 6987.32-2001 | 铝及铝合金化学分析方法 草酸盐重量法测定稀土总量 | Aluminium and aluminium alloys--Determination of total rare earth contents--Rare earth oxalate gravimetric method | |
ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) | 国際整合 |
77.120.40 | H62 | GB/T 7160-1987 | 微米级羰基镍粉 | Micron nickel carbonyl powder | |
77.040.30 | J31 | GB/T 7216-1987 | 灰铸铁金相 | Gray cast iron metallography | NEQ ISO 945-75(E) |
77.040.20 | J31 | GB/T 7233-1987 | 铸钢件超声探伤及质量评级标准 | Methods for ultrasonic testing and for specifying quality levels of steel castings | NEQ BS 6208-82 |
77.040.10 | H22 | GB/T 7314-1987 | 金属压缩试验方法 | Metallic materials--Compression testing | NEQ ASTM E9-81 |
77.140.80 | J31 | GB/T 7659-1987 | 焊接结构用碳素钢铸件 | Carbon steel castings suitable for welded structure | NEQ ASTM A216-82 |
77.010 | H10 | GB/T 7728-1987 | 冶金产品化学分析 火焰原子吸收光谱法通则 | Chemical analysis of metallurgical products--General rule for flame atomic absorption spectrometric methods | |
77.100 | H11 | GB/T 7730.1-1987 | 锰铁及高炉锰铁化学分析方法 电位滴定法测定锰量 | Methods for chemical analysis of ferromanganese and blast furnace ferromanganese--The potentiometric method for the determination of manganese content | IDT ISO 4159-78 |
77.100 | H11 | GB/T 7730.2-1987 | 锰铁及高炉锰铁化学分析方法 高氯酸脱水重量法测定硅量 | Methods for chemical analysis of ferromanganese and blast furnace ferromanganese--The perchloric acid deehydration-gravimetric method for the determination ofsilicon content | IDT JIS G1311-74 |
77.100 | H11 | GB/T 7730.3-1997 | 锰铁化学分析方法 磷量的测定 | Methods for chemical analysis of ferromanganese the determination of phosphorus content | EQV JIS G1312:1989 |
77.100 | H11 | GB/T 7730.5-2000 | 锰铁及高炉锰铁化学分析方法 红外线吸收法测定碳含量 | Methods for chemical analysis of ferromanganese and blast furnace ferromanganese The infrared absorption method for the determination of carbon content | |
77.100 | H11 | GB/T 7730.6-1988 | 锰铁及高炉锰铁化学分析方法 气体容量法测定碳量 | Methods for chemical analysis of ferromanganese and blast furnace ferromanganese--The gasometric method for the determination of carbon content | |
77.100 | H11 | GB/T 7730.7-1988 | 锰铁及高炉锰铁化学分析方法 重量法测定碳量 | Methods for chemical analysis of ferromanganese and blast furnace ferromanganese--The gravimetric method for the determination of carbon content | |
77.100 | H11 | GB/T 7730.8-2000 | 锰铁及高炉锰铁化学分析方法 红外线吸收法测定硫含量 | Methods for chemical analysis of ferromanganese and blast furnace ferromanganese The infrared absorption method for the determination of sulfur content | |
77.100 | H11 | GB/T 7730.9-1988 | 锰铁及高炉锰铁化学分析方法 燃烧中和滴定法测定硫量 | Methods for chemical analysis of ferromanganese and blast furnace ferromanganese--The combustion-neutralization titration method for the determination of sulfur content | |
77.100 | H11 | GB/T 7731.1-1987 | 钨铁化学分析方法 辛可宁重量法测定钨量 | Methods for chemical analysis of ferrotungsten--The cinchonine gravimetric method for the determination of tungsten content | IDT ISO 7693-84 |
77.100 | H11 | GB/T 7731.2-1987 | 钨铁化学分析方法 高碘酸钠光度法测定锰量 | Methods for chemical analysis of ferrotungsten--The sodium periodate photometric method for the determination of manganese content | IDT JIS G1316-82 |
77.100 | H11 | GB/T 7731.3-1987 | 钨铁化学分析方法 双环己酮草酰二腙光度法测定铜量 | Methods for chemical analysis of ferrotungsten--The bis (cyclohexanone) oxalyldihydrazone photometric method for the determination of copper content | IDT JIS G1316-82 |
77.100 | H11 | GB/T 7731.4-1987 | 钨铁化学分析方法 钼蓝光度法测定磷量 | Methods for chemical analysis of ferrotungsten--The molybdenum blue photometric method for the determination of phosphorus content | NEQ JIS G1316-82 |
77.100 | H11 | GB/T 7731.5-1987 | 钨铁化学分析方法 钼蓝光度法测定硅量 | Methods for chemical analysis of ferrotungsten--The molybdenum blue photometric method for the determination of silicon content | IDT JIS G1316-82 |
77.100 | H11 | GB/T 7731.6-1987 | 钨铁化学分析方法 钼蓝光度法测定砷量 | Methods for chemical analysis of ferrotungsten--The molybdenum blue photometric method for the determination of arsenic content | EQV JIS G1316-82 |
77.100 | H11 | GB/T 7731.7-1987 | 钨铁化学分析方法 苯基荧光酮光度法测定锡量 | Methods for chemical analysis of ferrotungsten--The phenylfluorone photometric method for the determination of tin content | IDT JIS G1316-82 |
77.100 | H11 | GB/T 7731.8-1987 | 钨铁化学分析方法 罗丹明B光度法测定锑量 | Methods for chemical analysis of ferrotungsten--The tetraethylrhodamine photometric method for the determination of antimony content | IDT JIS G1316-82 |
77.100 | H11 | GB/T 7731.9-1987 | 钨铁化学分析方法 碘化铋光度法测定铋量 | Methods for chemical analysis of ferrotungsten--The bismuth iodide photometric method for the determination of bismuth content | IDT JIS G1316-82 |
77.100 | H11 | GB/T 7731.10-1988 | 钨铁化学分析方法 红外线吸收法测定碳量 | Methods for chemical analysis of ferrotungsten--The infrared absorption method for the determination of carbon content | |
77.100 | H11 | GB/T 7731.12-1988 | 钨铁化学分析方法 红外线吸收法测定硫量 | Methods for chemical analysis of ferrotungsten--The infrared absorption method for the determination of sulfur content | |
77.100 | H11 | GB/T 7731.13-1988 | 钨铁化学分析方法 燃烧中和滴定法测定硫量 | Methods for chemical analysis of ferrotungsten--The combustion-neutralization titration method for the determination of sulfur content | |
77.100 | H11 | GB/T 7731.14-1988 | 钨铁化学分析方法 极谱法测定铅量 | ethods for chemical analysis of ferrotungsten--The polarographic method for the determination of lead content | EQV ΓOCT 14638.11-84 |
77.100 | H11 | GB/T 7731.15-1999 | 钨铁化学分析方法 火焰原子吸收光谱法测定铜量 | Methods for chemical analysis of ferrotungsten-The flame atomic absorption spectrometric method for the determination of copper content | NEQ JIS G1316:1998 |
77.100 | H11 | GB/T 7731.16-1999 | 钨铁化学分析方法 火焰原子吸收光谱法测定锰量 | Methods for chemical analysis of ferrotungsten The flame atomic absorption spectrometric method for the determination of manganese content | NEQ JIS G 1316:1998 |
77.040.10 | H23 | GB/T 7732-1987 | 金属板材表面裂纹断裂韧度Kle试验方法 | Standard test method for surface-crack fracture toughness Kle of metallic plates | NEQ ASTM E740-80 |
77.040.10 | H23 | GB/T 7733-1987 | 金属旋转弯曲腐蚀疲劳试验方法 | Metals-rotating bar bending corrosion fatigue testing | NEQ ISO 1143-75 |
77.040.20 | H25 | GB/T 7734-1987 | 复合钢板超声波探伤方法 | Method for ultrasonic testing of clad steel plates | NEQ JIS G0601-80 |
77.040.20 | H26 | GB/T 7735-1995 | 钢管涡流探伤检验方法 | Steel tubes--The inspection method on eddy current test | EQV ISO 9304-1989 |
77.040.20 | H26 | GB/T 7736-2001 | 钢的低倍组织及缺陷超声波检验法 | Ultrasonic inspecting method for macro-structure and imperfection of steel | |
77.100 | H42 | GB/T 7737-1997 | 铌铁 | Ferroniobium | NEQ ASTM A550-78(1985) |
77.100 | H42 | GB/T 7738-1987 | 铁合金产品牌号表示方法 | Notations for designation of ferroalloys | |
77.120.70 | D43 | GB/T 7739.1-1987 | 金精矿化学分析方法 火试金法测定金量和银量 | Methods for chemical analysis of gold concentrates--The fireassaying method for the determination of gold and silver contents | |
77.120.70 | D43 | GB/T 7739.2-1987 | 金精矿化学分析方法 原子吸收分光光度法测定银量 | Methods for chemical analysis of gold concentrates--The flame atomic absorption spectrophotometric methods for the determination of silver content | |
77.120.30 | D43 | GB/T 7739.3-1987 | 金精矿化学分析方法 二乙基二硫代氨基甲酸银分光光度法测定砷量 | Methods for chemical analysis of gold concentrates--The silver diethyldithiocarbamate spectrophotometric method for the determination of arsenic content | |
77.120.70 | D43 | GB/T 7739.4-1987 | 金精矿化学分析方法 碘量法测定砷量 | Methods for chemical analysis of gold concentrates--The indometric method for the determination of arsenic content | |
77.040.10 | H22 | GB/T 7963-1987 | 烧结金属材料(不包括硬质合金) 拉伸试样 | Sintered metal materials (excluding hardmetal)--Tensile test pieces | IDT ISO 2740-73 |
77.040.10 | H22 | GB/T 7964-1987 | 烧结金属材料(不包括硬质合金) 室温拉伸试验 | Sintered metal materials (excluding hardmetal)--Tension testing at room temperature | NEQ ISO 2740-73 |
77.040.10 | H22 | GB/T 7997-1987 | 硬质合金维氏硬度试验方法 | Hardmetals--Vickers hardness test | EQV ISO 3878-83 |
77.040.30 | H25 | GB/T 7998-1987 | 铝合金晶间腐蚀测定方法 | The method for determining the intergranular corrosion of aluminium alloy | NEQ ΓOCT 4024 |
77.040.01 | H12 | GB/T 7999-2000 | 铝及铝合金光电(测光法)发射光谱分析方法 | Standard method for direct reading spectromertric analysis of aluminum and its alloys | |
ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) | 国際整合 |
77.150.30 | H62 | GB/T 8000-2001 | 热交换器用黄铜管残余应力检验方法 氨熏试验法 | Brass tube in heat-exchanger--Ammonial test for residual stress corrosion | NEQ ISO 6957:1988 |
77.120.10 | H60 | GB/T 8005-1987 | 铝及铝合金术语 | Aluminium and aluminium alloys--Terms and definitions | NEQ ISO 3134/1~4-85 |
77.120.30 | H62 | GB/T 8010-1987 | 气门嘴用HPb63-0.1铅黄铜管 | HPb63-0.1 leaded brass tube for air valve mouth applications | NEQ ISO/DP 1635-85 |
77.120.40 | H62 | GB/T 8011-1987 | 镍及镍合金无缝薄壁管 | Thin wall tube of nickel and nickel alloy | NEQ ΓOCT 13548-77 |
77.140.90 | J31 | GB/T 8063-1994 | 铸造有色金属及其合金牌号表示方法 | Designation of cast nonferrous metals and their alloys | NEQ ISO 2092 |
77.140.75 | H48 | GB/T 8162-1999 | 结构用无缝钢管 | Seamless steel tubes for structural purposes | NEQ JIS G 3444:1994 |
77.140.75 | H48 | GB/T 8163-1999 | 输送流体用无缝钢管 | Seamless steel tubes for liquid service | NEQ ISO 559:1991 |
77.140.60 | H46 | GB/T 8164-1993 | 焊接钢管用钢带 | Steel strips for welded steel pipe | NEQ JIS G 3122 |
77.140.50 | H46 | GB/T 8165-1997 | 不锈钢复合钢板和钢带 | Stainless steel clab plates and strips | NEQ JIS G3601-1990 |
77.120.50 | H61 | GB/T 8180-1987 | 钛及钛合金加工产品的包装、标志、运输和贮存 | Wrought titanium and titanium alloy products packing, marking, transporting and storing | |
77.120.70; | H63 | GB/T 8182-1987 | 钽及钽合金无缝管 | Tantalum and tantalum alloy seamless tubes | NEQ ASTM B521-82 |
77.120.70; | H63 | GB/T 8183-1987 | 铌无缝管 | Niobium seamless tubes | NEQ ASTM B394-78 |
77.120.70 | H13 | GB/T 8220.1-1998 | 铋化学分析方法 双乙醛草酰二腙分光光度法测定铜量 | Methods for chemical analysis of bismuth--Determination of copper content--Bis-acetaldehyde-oxalydihydrazone photometric method | |
77.120.70 | H13 | GB/T 8220.2-1998 | 铋化学分析方法 1,10-二氮杂菲分光光度法测定铁量 | Methods for chemical analysis bismuth--Determination of iron content--1,10-phenanthroline photometric method | |
77.120.70 | H13 | GB/T 8220.3-1998 | 铋化学分析方法 孔雀绿分光光度法测定锑量 | Methods for chemical analysis of bismuth--Determination of antimony content--Melachite green photometric method | |
77.120.70 | H13 | GB/T 8220.4-1998 | 铋化学分析方法 火焰原子吸收光谱法测定银量 | Methods for chemical analysis of bismuth--Determination of silver content--Flame atomic absorption spectrophotometric method | |
77.120.70 | H13 | GB/T 8220.5-1998 | 铋化学分析方法 固液萃取分离 火焰原子吸收光谱法测定锌量 | Methods for chemical analysis bismuth--Determination of zinc content--Solid-liquid extraction-flame atomic absorption spectrophotomeric method | |
77.120.70 | H13 | GB/T 8220.6-1998 | 铋化学分析方法 电热原子吸收光谱法测定铅量 | Methods for chemical analysis of bismuth--Determination of lead content--Electrothermal atomic absorption spectrometric method | |
77.120.70 | H13 | GB/T 8220.7-1998 | 铋化学分析方法 离子交换分离--氢化物发生--火焰原子吸收光谱法测定砷量 | Methods for chemical analysis of bismuth--Determination of arsenic content--Ion exchange separation-hydrid generation-flame atomic absorptionspectrophtometric method | |
77.120.70 | H13 | GB/T 8220.8-1998 | 铋化学分析方法 蒸馏--硫氰酸汞分光光度法测定氯量 | Methods for chemical analysis of bismuth--Determination of chlorine content--Distillation-mercuric thiocyanate photometric method | |
77.120.70 | H13 | GB/T 8220.9-1998 | 铋化学分析方法 砷共沉淀--示波极谱法测定碲量 | Methods for chemical analysis of bismuth--Determination of teuurium content-Coprecipitation with arsenic-oscillopolarog raphic method | |
77.120.70 | H13 | GB/T 8220.10-1998 | 铋化学分析方法 铍共沉淀--分光光度法测定锡量 | Methods for chemical analysis of bismuth--Determination of tin content--Coprecipitation with beryllium-photometric method | |
77.120.70 | H13 | GB/T 8220.11-1998 | 铋化学分析方法 冷蒸气原子吸收光谱法测定汞量 | Methods for chemical analysis of bismuth--Determination of mercury content--Cold vapour atomic absorption spectrometric method | |
77.120.70 | H13 | GB/T 8220.12-1998 | 铋化学分析方法 电热原子吸收光谱法测定镍量 | Methods for chemical analysis of bismuth--Determination of nickel content--Electrothermal atomic absorption spectrometric method | |
77.120.70 | H13 | GB/T 8220.13-1998 | 铋化学分析方法 电热原子吸收光谱法测定银、镉量 | Methods for chemical analysis of bismuth--Determination of silver and cadmium content--Electrothermal atomic absorption spectrometric method | |
77.140.80 | J31 | GB/T 8263-1999 | 抗磨白口铸铁件 | Abrasion-resistant white iron castings | EQV ASTM A532/A532M:1993 |
77.040.30 | H21 | GB/T 8359-1987 | 高速钢中碳化物相的定量分析 X射线衍射仪法 | Carbides in high speed steel--Quantitative phase analysis--Method of X-ray diffractometer | |
77.040.20 | H21 | GB/T 8360-1987 | 金属点阵常数的测定方法 X射线衍射仪法 | The lattice constant determination of metals--Method of X-ray diffractometer | |
77.040.20 | H26 | GB/T 8361-2001 | 冷拉圆钢表面超声波探伤方法 | The surface of cold drawn rounds steel--Method for the ultrasonic inspection | |
77.040.20 | H21 | GB/T 8362-1987 | 钢中残余奥氏体定量测定 X射线衍射仪法 | Retained austenite in steel--Quantitative determination--Method of X-ray diffractometer | |
77.040.10 | H23 | GB/T 8363-1987 | 铁素体钢落锤撕裂试验方法 | Metallic materials--Drop-weight tear tests of ferritic steels | NEQ ASTM E436-74 |
77.040.10 | H21 | GB/T 8364-1987 | 热双金属比弯曲试验方法 | Test method for specific thermal deflection of thermostat metals | NEQ DIN 1715-83 |
77.140.80 | J31 | GB/T 8491-1987 | 高硅耐蚀铸铁件 | Corrosion resistant high silicon iron castings | |
77.140.80 | J31 | GB/T 8492-1987 | 耐热钢铸件 | Heat resistant steel castings | |
77.040.30 | J31 | GB/T 8493-1987 | 一般工程用铸造碳钢金相 | Metallograph of cast carbon steels for general engineering purposes | |
77.120.10 | H61 | GB/T 8544-1997 | 铝及铝合金冷轧带材 | Aluminum and aluminium alloy cold rolled strip | |
77.120.10 | H61 | GB/T 8545-1987 | 铝及铝合金模锻件的尺寸偏差及加工余量 | Die forgings of aluminium and aluminium alloy--Dimensional tolerance and machining allowance | NEQ DIN 1749-74 |
77.120.50 | H62 | GB/T 8546-1987 | 钛-不锈钢复合板 | Titanium clad stainless steel plate | EQV JIS G3603-86 |
77.120.50 | H62 | GB/T 8547-1987 | 钛-钢复合板 | Titanium clad steel plate | EQV JIS G3603-86 |
77.120.40 | H71 | GB/T 8548-1987 | 镍基喷涂合金粉 | Metallic powder material nickel-based alloy powder for spraying | |
77.120 | H71 | GB/T 8549-1987 | Fe-Cr-B-Si系自熔合金粉 | Metallic powder material--Self-fluxing Fe-Cr-B-Si alloy powder | |
77.120.40 | H16 | GB/T 8638.1-1988 | 镍基合金粉化学分析方法 中和滴定法测定硼量 | Nickel base alloy powder--Determination of boron content--Alkalimetric method | |
77.120.40 | H16 | GB/T 8638.2-1988 | 镍基合金粉化学分析方法 铬天青 S分光光度法测定铝量 | Nickel base alloy powder--Determination of aluminium content--Chrome azurol S spectrophotometric method | |
77.120.40 | H16 | GB/T 8638.3-1988 | 镍基合金粉化学分析方法 高氯酸脱水重量法测定硅量 | Nickel base alloy powder--Determination of silicon content--Gravimetric method after dehydration by per- chloric acid | |
77.120.40 | H16 | GB/T 8638.4-1988 | 镍基合金粉化学分析方法 过硫酸铵氧化滴定法测定铬量 | Nickel base alloy powder--Determination of chromium content--Persulfate oxidation titrimetric method | |
77.120.40 | H16 | GB/T 8638.5-1988 | 镍基合金粉化学分析方法 高碘酸钠(钾)氧化分光光度法测定锰量 | Nickel base alloy powder--Determination of manganese content--Sodium (potassium) periodate spectrophotometric method | |
77.120.40 | H16 | GB/T 8638.6-1988 | 镍基合金粉化学分析方法 三氯化钛- 重铬酸钾滴定法测定铁量 | Nickel base alloy powder--Determination of iron content--Titanium trichloride-potassium dichromate titri-metric method | |
77.120.40 | H16 | GB/T 8638.7-1988 | 镍基合金粉化学分析方法 亚硝基R 盐分光光度法测定钴量 | Nickel base alloy powder--Determination of cobalt content--Nitroso-R salt spectrophotometric method | |
77.120.40 | H16 | GB/T 8638.8-1988 | 镍基合金粉化学分析方法 新亚铜灵- 三氯甲烷萃取分光光度法测定铜量 | Nickel base alloy powder--Determination of copper content--Neocuproine-chloroform extraction spectrophotometric method | |
77.120.40 | H16 | GB/T 8638.9-1988 | 镍基合金粉化学分析方法 硫代硫酸钠-碘量法测定铜量 | Nickel base alloy powder--Determination of copper content--Thiosulfate-iodimetric method | |
77.120.40 | H16 | GB/T 8638.10-1988 | 镍基合金粉化学分析方法 硫氰酸盐分光光度法测定钼量 | Nickel base alloy powder--Determination of melybdenum content--Thiocyanate spectrophotometric method | |
77.120.40 | H16 | GB/T 8638.11-1988 | 镍基合金粉化学分析方法 辛可宁重量法测定钨量 | Nickel base alloy powder--Determination of tungsten content--Cinchonine gravimetric method | |
77.120.40 | H16 | GB/T 8638.12-1988 | 镍基合金粉化学分析方法 正丁醇- 三氯甲烷萃取分光光度法测定磷量 | Nickel base alloy powder--Determination of phosphorus content--N-butyl alcohol-chloroform extraction spectrophotometric method | |
77.120.40 | H16 | GB/T 8638.13-1988 | 镍基合金粉化学分析方法 脉冲加热惰性气熔融库仑滴定法测定氧量 | Nickel base alloy powder--Determination of oxygen content--Pulse heating inert gas fusion coulometric titrimetric method | |
77.120.70 | H14 | GB/T 8639.1-1988 | 钒化学分析方法 高锰酸钾 -硫酸亚铁铵滴定法测定钒量 | Vanadium--Determination of vanadium content--Potassium permanganate-ammonium ferrous sulphate volumetric method | |
77.120.70 | H14 | GB/T 8639.2-1988 | 钒化学分析方法 二苯基碳酰二肼光度法测定铬量 | Vanadium--Determination of chromium content--Diphenylcarbazide spectrophotometric method | |
77.120.70 | H14 | GB/T 8639.3-1988 | 钒化学分析方法 CAS-TPC光度法测定铝量 | Vanadium--Determination of aluminium content--CAS-TPC spectrophotometric method | |
77.120.70 | H14 | GB/T 8639.4-1988 | 钒化学分析方法 邻菲罗啉光度法测定铁量 | Vanadium--Determination of iron content--Phenanthrline spectrophotometric method | |
77.120.70 | H14 | GB/T 8639.5-1988 | 钒化学分析方法 异戊醇萃取光度法测定铁量 | Vanadium--Determination of iron content--Isoamyl alcohol extraction spectrophotometric method | |
77.120.70 | H14 | GB/T 8639.6-1988 | 钒化学分析方法 正丁醇萃取光度法测定硅量 | Vanadium--Determination of silicon content--N-butyl alcohol extraction spectrophotometric method | |
77.120.70 | H14 | GB/T 8639.7-1988 | 钒化学分析方法 脉冲熔融-气相色谱法测定氧量 | Vanadium--Determination of oxygen content--Impulse fusion-gas chromatographic method | |
77.040.10 | H23 | GB/T 8640-1988 | 金属热喷涂层表面洛氏硬度试验方法 | Thermal sprayed metallic coatings--Rockwell hardness test | |
77.040.10 | H23 | GB/T 8641-1988 | 热喷涂层抗拉强度的测定 | Thermal sprayed coatings--Determination of tensile strength | NEQ JIS H8664-77 |
77.040.10 | H23 | GB/T 8642-1988 | 热喷涂层结合强度的测定 | Thermal sprayed coatings--Determination of adhesion strength | |
77.120 | H21 | GB/T 8643-1988 | 含润滑剂金属粉末中润滑剂含量的测定 索格利特 (Soxhlet)萃取法 | Lubricated metallic powders--Determination of lubricant content--Soxhlet extraction method | EQV ISO 4495-78 |
77.120.10 | H61 | GB/T 8644-2000 | 重熔用精铝锭 | Refined aluminium ingot for remelting | |
77.120.10 | H61 | GB/T 8645-1988 | 旋压无缝铝筒 | Seamless aluminium cylinder produced by power spinning | NEQ ANSI H35.2-85 |
77.120.40 | H13 | GB/T 8647.1-1988 | 镍化学分析方法 磺基水杨酸分光光度法测定铁量 | Nickel--Determination of ironcontent--Sulfosalicylic acid spectrophotometric method | EQV ISO 7523-85 |
77.120.40 | H13 | GB/T 8647.2-1988 | 镍化学分析方法 铬天青S-聚乙二醇辛基苯基醚- 溴代十四烷基吡啶混合胶束摎n分光光度法测定铝量 | Nickel--Determination of aluminium content--Chromazurol S-p-octyl polyethylene glycol phenyl ether-tetradecyl phridinium bromine mixed micellar solubilization spectrophotometric method | |
77.120.40 | H13 | GB/T 8647.3-1988 | 镍化学分析方法 钼蓝分光光度法测定硅量 | Nickel--Determination of silicon content--Molybdenum blue spectrophotometric method | |
77.120.40 | H13 | GB/T 8647.4-1988 | 镍化学分析方法 钼蓝分光光度法测定磷量 | Nickel--Determination of phosphorus content--Molybdenum blue spectrophotometric method | EQV ΓOCT 13047.5-81 |
77.120.40 | H13 | GB/T 8647.5-1988 | 镍化学分析方法 火焰原子吸收分光光度法测定镁量 | Nickel--Determination of magnesium content--Flame atomic absorption spectrophotometric method | |
77.120.40 | H13 | GB/T 8647.6-1988 | 镍化学分析方法 火焰原子吸收分光光度法测定镉、钴、铜、锰、铅、锌量 | Nickel--Determination of cadmium, cobalt, copper, manganese, lead and zinc contents--Flame atomic absorption spectrophotometric method | EQV ISO 6351-85 |
77.120.40 | H13 | GB/T 8647.7-1988 | 镍化学分析方法 电热原子吸收分光光度法测定砷、锑、铋、锡、铅量 | Nickel--Determination of arsenic, antimony, bismuth, tin and lead contents--Electrothermal atomic absorption spectrophotometric method | EQV ISO 7523-85 |
77.120.40 | H13 | GB/T 8647.8-1988 | 镍化学分析方法 蒸馏-示波极谱法测定硫量 | Nickel--Determination of sulfur content--Oscillopolarographic method after distillation | |
77.120.40 | H13 | GB/T 8647.9-1988 | 镍化学分析方法 高频感应炉燃烧红外吸收法测定硫量 | Nickel--Determination of sulphur content--Infra-red absorption method after high frequency induction furnace combustion | NEQ ISO 7526-85 |
77.120.40 | H13 | GB/T 8647.10-1988 | 镍化学分析方法 高频感应炉燃烧红外吸收法测定碳量 | Nickel--Determination of carbon content--Infra-red absorption method after high frequency induction furnace combustion | NEQ ISO 7524-85 |
77.140.70 | H41 | GB/T 8649-1988 | 轧制钢球 | Rolling balls | NEQ ΓOCT 7524-74 |
77.040.10 | H25 | GB/T 8650-1988 | 管线钢抗阶梯型破裂试验方法 | Test method of pipeline steels for resistance to step wise cracking | EQV NACE TM02-84 |
77.040.20 | H24 | GB/T 8651-1988 | 金属板材超声板波探伤方法 | The inspection method of ultrasonic plate wave for the metal plates | |
77.040.20 | H24 | GB/T 8652-1988 | 变形高强度钢超声波检验方法 | The ultrasonic inspection methods for wrought high strength steels | NEQ MIL STD2154-82 |
77.040.10 | H22 | GB/T 8653-1988 | 金属杨氏模量、弦线模量、切线模量和泊松比试验方法 (静态法) | Metallic materials--Determination of Young's modulus, chord modulus, tangent modulus and Poisson's ratio (statical method) | NEQ ASTM E111-82 |
77.080 | H11 | GB/T 8654.1-1988 | 金属锰化学分析方法 邻二氮杂菲光度法测定铁量 | Methods for chemical analysis of manganese metal--The ortho-phenanthroline photometric method for the determination of iron content | NEQ JIS G1321-74 |
77.080 | H11 | GB/T 8654.2-1988 | 金属锰化学分析方法 三氯化钛- 重铬酸钾容量法测定铁量 | Methods for chemical analysis of manganese metal--The titanium trichloride-potassium dichromate volumetric method for the determination of iron content | |
77.080 | H11 | GB/T 8654.3-1988 | 金属锰化学分析方法 钼蓝光度法测定硅量 | Methods for chemical analysis of manganese metal--The molybdenum blue photometric method for the determination of silicon content | NEQ JIS G1321-74 |
77.080 | H11 | GB/T 8654.4-1988 | 金属锰化学分析方法 高氯酸脱水重量法测定硅量 | Methods for chemical analysis of manganese metal--The perchloric acid dehydration gravimetric method for the determination of silicon content | EQV JIS G1311-74 |
77.080 | H11 | GB/T 8654.5-1988 | 金属锰化学分析方法 钼蓝光度法测定磷量 | Methods for chemical analysis of manganese metal--The molybdenum blue photometric method for the determination of phosphorus content | NEQ JIS G1321-74 |
77.080 | H11 | GB/T 8654.6-1988 | 金属锰化学分析方法 盐酸联氨-碘量法测定硒量 | Methods for chemical analysis of manganese metal--The diamine hydrochloride-iodo-metric method for the determination of selenium content | NEQ ΓOCT 12363-79 |
77.080 | H11 | GB/T 8654.7-1988 | 金属锰化学分析方法 电位滴定法测定锰量 | Methods for chemical analysis of manganese metal--The potentiometric titration method for the determination of manganese content | NEQ ISO 4159-78 |
77.080 | H11 | GB/T 8654.8-1988 | 金属锰化学分析方法 红外线吸收法测定碳量 | Methods for chemical analysis of manganese metal--The infrared absorption method for the determination of carbon content | |
77.080 | H11 | GB/T 8654.10-1988 | 金属锰化学分析方法 红外线吸收法测定硫量 | Methods for chemical analysis of manganese metal--The infrared absorption method for the determination of sulfur content | |
77.080 | H11 | GB/T 8654.11-1988 | 金属锰化学分析方法 燃烧中和滴定法测定硫量 | Methods for chemical analysis of manganese metal--The combustion-neutralization titration method for the determination of sulfur content | |
77.100 | H11 | GB/T 8704.1-1997 | 钒铁化学分析方法 红外线吸收法及气体容量法测定碳量 | Methods for chemical analysis of ferrovandium The infrared absorption method and the gasometric method for the determination of carbon content | |
77.100 | H11 | GB/T 8704.3-1997 | 钒铁化学分析方法 红外线吸收法及燃烧中和滴定法测定硫量 | Methods for chemical analysis of ferrovanadium The infrared absorption method and the combustion-neutralization titration method for the determination of sulfur content | EQV JIS G1318-1982 |
77.100 | H11 | GB/T 8704.5-1994 | 钒铁化学分析方法 电位滴定法测定钒量 | Methods for chemical analysis of ferrovanadium--The potentiometric method for the determination of vanadium content | EQV ISO 6467-80 |
77.100 | H11 | GB/T 8704.6-1994 | 钒铁化学分析方法 硫酸脱水重量法测定硅量 | Methods for chemical analysis of ferrovanadium--The sulphuric acid dehydration-gravimetric method for the determination of silicon content | |
77.100 | H11 | GB/T 8704.7-1994 | 钒铁化学分析方法 钼蓝光度法测定磷量 | Methods for chemical analysis of ferrovanadium--The molybdenum blue photometric method for the determination of phosphorus content | |
77.100 | H11 | GB/T 8704.8-1994 | 钒铁化学分析方法 铬天青S光度法和EDTA容量法测定铝量 | Methods for chemical analysis of ferrovanadium--The chromazurol S photometric method and EDTA volumetric method for determination of aluminium content | |
77.100 | H11 | GB/T 8704.9-1994 | 钒铁化学分析方法 高碘酸钾光度法和火焰原子吸收光谱法测定锰量 | Methods for chemical analysis of ferrovanadium--The potassium periodate oxidation photometric method and flame atomic absorption spectrometric method for determination of manganese content | |
77.100 | H11 | GB/T 8705.1-1988 | 磷铁化学分析方法 红外线吸收法测定碳量 | Methods for chemical analysis of ferrophosphorus--The infrared absorption method for the determination of carbon content | EQV ASTM E1019-85 |
77.100 | H11 | GB/T 8705.2-1988 | 磷铁化学分析方法 气体容量法测定碳量 | Methods for chemical analysis of ferrophosphorus--The gasometric method for the determination of carbon content | EQV JIS G1318-77 |
77.100 | H11 | GB/T 8705.3-1988 | 磷铁化学分析方法 红外线吸收法测定硫量 | Methods for chemical analysis of ferrophosphorus--The infrared absorption method for the determination of sulfur content | EQV ASTM E1019-85 |
77.100 | H11 | GB/T 8705.4-1988 | 磷铁化学分析方法 燃烧中和滴定法测定硫量 | Methods for chemical analysis of ferrophosphorus--The combustion-neutralization titration method for the determination of sulfur content | |
77.080.20 | H40 | GB/T 8731-1988 | 易切削结构钢 技术条件 | Free-cutting steel--Technical requirements | NEQ ΓOCT 1414-75 |
77.080.20 | H40 | GB/T 8732-1988 | 汽轮机叶片用钢 | Steels for vane of steam turbine | NEQ ΓOCT 18968-73 |
77.120.10 | H61 | GB/T 8733-2000 | 铸造铝合金锭 | Aluminium alloy ingots for casting | |
77.120.30 | H62 | GB/T 8737-1988 | 铸造黄铜锭 | Brass ingots for casting | NEQ ISO 1338-77 |
77.120.60 | H62 | GB/T 8738-1988 | 铸造锌合金锭 | Zinc alloy ingots for casting | |
77.120.30 | H62 | GB/T 8739-1988 | 铸造青铜锭 | Bronze ingots for casting | NEQ ISO 1338-77 |
77.140.20 | H62 | GB/T 8740-1988 | 铸造轴承合金锭 | Bearing alloy ingots for casting | |
77.140.60 | H46 | GB/T 8749-1988 | 优质碳素结构钢热轧钢带 | Hot-rolled quality carbon structural steel strips | NEQ ГOCT 1530-78 |
77.120.70 | H65 | GB/T 8751-1988 | 钐铕钆富集物 | Samarium europium gadolinium concentrate | |
77.040.30 | H24 | GB/T 8755-1988 | 钛及钛合金术语金相图谱 | Collection of metallographs on titanium and titanium alloy terms | NEQ CAE AS 1814 |
77.040.30 | H24 | GB/T 8756-1988 | 锗晶体缺陷图谱 | Collection of metallographs on defects of crystalline germanium | NEQ ASTM F389-84 |
77.040.30 | H21 | GB/T 8757-1988 | 砷化镓中载流子浓度等离子共振测量方法 | Determination of carrier concentration in gallium arsenide by the plasma resonance minimum | NEQ ASTM F398-77 |
77.040.30 | H21 | GB/T 8758-1988 | 砷化镓外延层厚度红外干涉测量方法 | Measuring thickness of epitaxial layers of gallium arsenide by infrared interference | |
77.040.30 | H24 | GB/T 8760-1988 | 砷化镓单晶位错密度的测量方法 | Gallium arsenide single crystal--Determination of dislocation density | NEQ ASTM T47-84 |
77.120.70 | H64 | GB/T 8767-1988 | 核工业用锆及锆合金铸锭 | Zirconium and zirconium alloy ingots for nuclear application | NEQ ASTM B350-84 |
77.120.70 | H63 | GB/T 8768-1988 | 核工业用锆及锆合金无缝管 | Zirconium and zirconium alloy seamless tubes for nuclear application | NEQ ASTM B353-83 |
77.120.70 | H63 | GB/T 8769-1988 | 核工业用锆及锆合金棒材和线材 | Zirconium and zirconium alloy bars and wires for nuclear application | NEQ ASTM B351-83 |
77.140.90 | H62 | GB/T 8888-1988 | 重有色金属加工产品的包装、标志、运输和贮存 | Wrought heavy non-ferrous metal products--Packing, marking, transporting and storing | |
77.120.30 | H62 | GB/T 8891-2000 | 铜及铜合金散热扁管 | Casting tin-lead solders(?) | NEQ ГOCT 2936:1975 |
77.140.60 | H49 | GB/T 8919-1996 | 制绳用钢丝 | Wire for steel wire ropes use | EQV ISO 2232-1990 |
77.120.99 | H68 | GB/T 8930-2001 | 合质金锭 | Crude gold ingots | |
ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) | 国際整合 |
77.040.20 | H72 | GB/T 9095-1988 | 烧结铁基材料 渗碳或碳氮共渗硬化层深度的测定 | Measurement on the carburizing or nitro-caburizing harden case depth of sintering iron-based material | NEQ ISO 4507-78 |
77.040.10 | H72 | GB/T 9096-1988 | 烧结金属材料(不包括硬质合金)冲击试验方法 | Sintered metals materials, excluding hardmetals--Impact text method | NEQ ISO 5457-78 |
77.040.10 | H72 | GB/T 9097.1-1988 | 烧结金属材料(不包括硬质合金)表观硬度的测定 第一部分: 截面硬度基本均遠I材料 | Sintered metal materials, excluding hardmetals--Determination of apparent hardness--Part 1: Materials of essentially uniform section hardness | NEQ ISO 4498/1-78 |
77.140.80 | J31 | GB/T 9437-1988 | 耐热铸铁件 | Heat resistant iron castings | |
77.140.80 | J31 | GB/T 9438-1999 | 铝合金铸件 | Aluminium alloy castings | NEQ ASTM B26/B26M:1992 |
77.140.80 | J31 | GB/T 9439-1988 | 灰铸铁件 | Grey iron castings | |
77.140.80 | J31 | GB/T 9440-1988 | 可锻铸铁件 | Malleable iron castings | NEQ ISO 5922-81 |
77.140.30 | J31 | GB/T 9441-1988 | 球墨铸铁金相检验 | Metallographic test for spheroidal graphite cast iron | |
77.040.20 | J04 | GB/T 9443-1988 | 铸钢件渗透探伤及缺陷显示迹痕的评级方法 | Methods of liquid penetrant testing and classification of indication for steel castings | |
77.040.20 | J04 | GB/T 9444-1988 | 铸钢件磁粉探伤及质量评级方法 | The methods for magnetic particle testing and for specifying quality levels of steel castings | |
77.140.70 | H44 | GB/T 9787-1988 | 热轧等边角钢 尺寸、外形、重量及允许偏差 | Hot-rolled equal--leg angle steel--Dimensions, shape, weight and tolerances | NEQ ΓOCT 8509-72 |
77.140.70 | H44 | GB/T 9788-1988 | 热轧不等边角钢 尺寸、外形、重量及允许偏差 | Hot-rolled unequal--leg angle steel--Dimensions, shape, weight and tolerances | NEQ ΓOCT 8510-72 |
77.140.50 | H46 | GB/T 9941-1988 | 高速工具钢钢板技术条件 | High speed tool steel sheets and plates--Technical requirements | |
77.140.20 | H40 | GB/T 9942-1988 | 高速工具钢大截面锻制钢材技术条件 | High speed tool steel forged bars with large section--Technical requirements | |
77.140.60 | H40 | GB/T 9943-1988 | 高速工具钢棒技术条件 | High speed tool steel bars--Technical requirements | NEQ ASTM A600-79 |
77.140.50 | H44 | GB/T 9945-2001 | 热轧球扁钢 | Hot-rolled bulb flat steel | NEQ EN 10067:1996 |
77.140.70 | H44 | GB/T 9946-1988 | 热轧L型钢尺寸、外形、重量及允许偏差 | Dimensions, shape, weight and tolerances for hot-rolled L-sectional steel | NEQ ISO 657/18-80 |
77.150.99 | H65 | GB/T 9967-2001 | 金属钕 | Neodymium metal | |
77.080.10 | H53 | GB/T 9971-1988 | 原料纯铁 | Pure iron for raw material | |
ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) | 国際整合 |
77.080 | H63 | GB/T 10116-1988 | 仲钨酸铵 | Ammonium paratungstate | |
77.080 | H62 | GB/T 10117-1988 | 高纯锑 | High purity antimonium | NEQ ΓOCT 1089-82 |
77.120.70 | H66 | GB/T 10118-1988 | 高纯镓 | High purity gallium | |
77.060 | H26 | GB/T 10119-1988 | 黄铜耐脱锌腐蚀性能的测定 | Copper-zinc alloys--Determination of dezincification corrosion resistance | EQV ISO 6509-81 |
77.040.10 | H22 | GB/T 10120-1996 | 金属应力松弛试验方法 | Metallic materials--Stress relaxation test | NEQ ASTM E 328-1986 |
77.040.20 | H24 | GB/T 10121-1988 | 钢材塔形发纹磁粉检验方法 | Steel products--Method for magnetic particle inspection of tower sample | NEQ ASTM E709-85 |
77.060 | H25 | GB/T 10123-2001 | 金属和合金的腐蚀 基本术语和定义 | Corrosion of metals and alloys Basic terms and definitions | EQV ISO 8044:1999 |
77.060 | H25 | GB/T 10126-1988 | 铁-铬-镍合金在高温水中应力腐蚀试验方法 | Fe-Cr-Ni alloys--Stress corrosion test in high temperature water | |
77.060 | H25 | GB/T 10127-1988 | 不锈钢三氯化铁缝隙腐蚀试验方法 | Stainless steels--Method of ferric chloride crevice corrosion test | NEQ ASTM G48-80 |
77.040.10 | H22 | GB/T 10128-1988 | 金属室温扭转试验方法 | Metallic materials--Torsion test at room temperature | NEQ ΓOCT 3565-80 |
77.040 | H21 | GB/T 10129-1988 | 电工钢片(带)中频磁性能测量方法 | Methods of measurement of magnetic properties of magnetic steel sheet and strip at medium frequencies | |
77.100 | H42 | GB/T 10131-1988 | 铌锰铁合金 | Mn-Nb-Fe alloy | |
77.120.70 | H12 | GB/T 10267.1-1988 | 金属钙分析方法 氯离子选择性电极法测定氯 | Method for analysis of calcium metal--The determination of chlorine content by chloride--Selective electrode | |
77.120.70 | H12 | GB/T 10267.2-1988 | 金属钙分析方法 微量硅的光度法测定 | Method for analysis of calcium metal--The determination of micro-amounts of silicon by photometric method | |
77.120.70 | H12 | GB/T 10267.3-1988 | 金属钙分析方法 原子吸收法直接测定铁、镍、铜、锰、镁 | Method for analysis of calcium metal--The direct determination of iron, nickel, copper, manganese and magnesium in calcium metal by atomic absorptiom spectrometry | |
77.120.70 | H12 | GB/T 10267.4-1988 | 金属钙分析方法 8-羟基喹啉-三氯甲烷萃取分光光度法测定铝 | Method for analysis of calcium metal--The determination of aluminium by oxine chloroform extraction photometric method | |
77.120.70 | H12 | GB/T 10267.5-1988 | 金属钙分析方法 蒸馏-奈斯勒试剂光度法测定氮 | Method for analgsis of calcium metal--The determination of nitrogen by distillation-Nessler reagent photometric method | |
77.120.70 | H12 | GB/T 10267.6-1988 | 金属钙分析方法 萃取分离原子吸收分光光度法测定铁、镍、铜、锰 | Method for analysis of calcium metal--The determination of lron, nickel, copper and manganese in calcium metal by atomic absorption spectrophotometry after extractive separation | |
77.100 | H11 | GB/T 10323-1988 | 铬铁、硅铬合金化学分析方法 电位滴定法测定铬量 | Methods for chemical analysis of ferrochromium and silicochromium--The potentiometric titration method for the determination of chromium content | EQV ISO 4140-79 |
77.080;
77. |
H72 | GB/T 10417-1989 | 碳化钨钢结硬质合金技术条件 | Technical conditions of steel-bonded tungsten carbides | |
77.080;
77. |
H72 | GB/T 10418-1989 | 碳化钨钢结硬质合金 横向断裂强度的测定 | Steel bonded tungsten carbides - Determination of transverse rupture strength | NEQ ISO 3327-82 |
77.080;
77. |
H72 | GB/T 10419-1989 | 碳化钨钢结硬质合金 冲击韧性的测定 | Steel bonded tungsten carbides - Determination of impact toughness | NEQ ISO 5754-78 |
77.080;
77. |
H72 | GB/T 10420-1989 | 碳化钨钢结硬质合金 洛氏硬度(C和A)的测定 | Steel bonded tungsten carbides - Determination of rockwell hardness (scales C and A) | NEQ ISO 3738/1-82 |
77.040.30 | H72 | GB/T 10421-1989 | 烧结金属摩擦材料 密度的测定 | Sintered metal friction materials - Determination of density | NEQ ASTM B376-80 |
77.040.10 | H72 | GB/T 10422-1989 | 烧结金属摩擦材料 横向断裂强度的测定 | Sintered metal friction materials - Determination of transverse rupture strength | NEQ ASTM B378-80 |
77.040.10 | H72 | GB/T 10423-1989 | 烧结金属摩擦材料 抗拉强度的测定 | Sintered metal friction materials - Determination of tension strength | |
77.040.10 | H72 | GB/T 10424-1989 | 烧结金属摩擦材料 抗压强度的测定 | Sintered metal friction materials - Determination of compression strength | |
77.040.10 | H72 | GB/T 10425-1989 | 烧结金属摩擦材料 表观硬度的测定 | Sinterd metal friction materials - Determination of apparent hardness | NEQ ISO 4498/1-78 |
77.040.10 | H72 | GB/T 10430-1989 | 烧结金属摩擦片结合强度测定方法 | Standard test method for binding strength of sintered metal friction elements | |
77.080.20 | H44 | GB/T 10560-1989 | 矿用高强度圆环链用钢技术条件 | High tensile steels for round link chains for mines - Technical requirements | NEQ DIN 17115-72 |
77.040.30 | H23 | GB/T 10561-1989 | 钢中非金属夹杂物显微评定方法 | Steel - Determination of content of non-metallic inclusion - Micrographic method using standard diagrams | EQV ISO 4967-79 |
77.040.30 | H21 | GB/T 10562-1989 | 金属材料超低膨账系数测定方法 光干涉法 | Metallic material - Standard test method for the extra-low expansion coefficient - Light interferometer method | NEQ ASTM E289-70 |
77.160 | H72 | GB/T 10565-1989 | 硬质合金量规毛坯 | Blank for hard metal (carbide) gauge blocks | |
77.160 | H72 | GB/T 10566-1989 | 硬质合金机夹可重磨刀片 | Clamping and resharpening hard metal (carbide) inserts | NEQ ANSI B212-84 |
77.040.30 | H13 | GB/T 10567.1-1997 | 铜及铜合金加工材残余应力检验方法 硝酸亚汞试验方法 | Wrought copper and copper alloys--Detection of residual stress--Mercury nitrate test | EQV ISO 196:1976 |
77.040.30 | H13 | GB/T 10567.2-1997 | 铜及铜合金残余应力检验方法 氨熏试验方法 | Wrought copper and copper alloys--Detection of residual stress--Ammonia test | EQV ISO 6957:1988 |
77.120.10 | H61 | GB 10570-1989 | 精制铝箔 | Patterned, laminated, coated and coloured aluminium foils | NEQ JIS Z1520-75 |
77.120.10 | H61 | GB/T 10571-1989 | 铝及铝合金焊接管 | Wrought aluminium and aluminium alloy - Welded tube | EQV ASTM B313-82 |
77.040.10 | H23 | GB/T 10573-1989 | 有色金属细丝拉伸试验方法 | Tensile testing method for fine wire of non-ferrous metals | |
77.040.10 | H22 | GB/T 10622-1989 | 金属材料滚动接触疲劳试验方法 | Metallic materials - Rolling contact fatigue test | |
77.040.10 | H22 | GB/T 10623-1989 | 金属力学性能试验术语 | Metallic materials - Terms of mechanical test | |
ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) | 国際整合 |
77.120.70 | H15 | GB/T 11066.1-1989 | 金化学分析方法 火试金法测定金量 | Gold - Determination of gold content - Fire assaying method | |
77.120.70 | H15 | GB/T 11066.2-1989 | 金化学分析方法 火焰原子吸收光谱法测定银量 | Gold - Determination of silver content - Flame atomic absorption spectrometric method | |
77.120.70 | H15 | GB/T 11066.3-1989 | 金化学分析方法 火焰原子吸收光谱法测定铁量 | Gold - Determination of iron content - Flame atomic absorption spectrometric method | |
77.120.70 | H15 | GB/T 11066.4-1989 | 金化学分析方法 火焰原子吸收光谱法测定铜、铅、铋和锑量 | Gold - Determination of copper, lead, bismuth and antimony contents - Flame atomic absorption spectrometric method | |
77.120.70 | H15 | GB/T 11066.5-1989 | 金化学分析方法 发射光谱法测定银、铜、铁、铅、锑和铋含量 | Gold - Determination of silver, copper, iron, lead, antimony and bismuth contents - Emission spectrometric method | |
77.120.70 | H15 | GB/T 11067.1-1989 | 银化学分析方法 氯化银沉淀 - 火焰原子吸收光谱法测定银量 | Silver - Determination of silver content - Silver chloride precopitation--Flame atomic absorption spectrome tric method | |
77.120.70 | H15 | GB/T 11067.2-1989 | 银化学分析方法 火焰原子吸收光谱法测定铜和金量 | Silver - Determination of copper and gold contents - Flame atomic absorption spectrometric method | |
77.120.70 | H15 | GB/T 11067.3-1989 | 银化学分析方法 火焰原子吸收光谱法测定铁、铅和铋量 | Silver - Determination of iron, lead and bismuth contents - Flame atomic absorption spectrometric method | |
77.120.70 | H15 | GB/T 11067.4-1989 | 银化学分析方法 2-(5-溴-2-吡啶偶氮)-5-二乙氨基苯酚分光光度法测定锑量 | Silver - Determination of antimony content - 2-(5-bromo -2-pyridylazo)-5-diethylaminophenol spectrophotometric method | |
77.120.70 | H15 | GB/T 11067.5-1989 | 银化学分析方法 燃烧-电导法测定碳量 | Silver - Determination of carbon content - combustion-conductometric method | |
77.120.70 | H15 | GB/T 11067.6-1989 | 银化学分析方法 燃烧-碘酸钾滴定法测定硫量 | Silver - Determination of sulphur content - Combustion-potassium iodate titrimetric method | |
77.120.70 | H15 | GB/T 11067.7-1989 | 银化学分析方法 发射光谱法测定铜、铋、铁、铅、金和锑量 | Silver - Determination of copper, bismuth, iron, lead, gold and antimony contents - Emission spectrometric method | |
77.120.70 | H81 | GB/T 11070-1989 | 还原锗锭 | Reduced germanium ingot | |
77.120.70 | H81 | GB/T 11071-1989 | 区熔锗锭 | Zone-refined germanium ingot | |
77.140.90 | H81 | GB/T 11072-1989 | 锑化铟多晶、单晶及切割片 | Indium antimonide polycrystal, single crystals and as-cut slices | |
77.120.30 | H62 | GB/T 11086-1989 | 铜及铜合金术语 | Copper and copper alloys - Terms and definitions | EQV ISO 197/1~4-83 |
77.150.30 | H62 | GB/T 11087-2001 | 散热器冷却管专用黄铜带 | Brass strip for heat-exchanger tubing | NEQ ASTM B 569:1998 |
77.120.40 | H62 | GB/T 11088-1989 | 电真空器件用镍及镍合金板和带 | Nickel and its alloy sheets and strips for electronic tube | NEQ ΓOCT 2170-73 |
77.120.30 | H62 | GB/T 11089-1989 | 专用铅黄铜带 | Leaded brass strips for special purpose | NEQ ΓOCT 2208-75 |
77.120.30 | H62 | GB 11090-1989 | 雷管用铜和铜合金带 | Copper and copper alloy strips for detonator | |
77.120.30 | H62 | GB/T 11091-1989 | 电缆用铜带 | Copper strip for cables | NEQ ΓOCT 16358-79 |
77.160 | H81 | GB/T 11094-1989 | 水平法砷化镓单晶及切割片 | Boat-grown gallium arsenide single crystals and As-cut slices | |
77.160 | H72 | GB/T 11101-1989 | 硬质合金圆棒毛坯 | As-sintered hardmetal round rods | |
77.160 | H72 | GB/T 11102-1989 | 地质勘探工具用硬质合金制品 | Hardmetal (carbide) for geological exploration drilling tools | |
77.040.10 | H23 | GB/T 11105-1989 | 金属粉末 压坯的拉托拉试验 | Metallic powder - Rattler test for the green compacts | |
77.040.10 | H23 | GB/T 11106-1989 | 金属粉末 用圆柱形压坯的压缩测定压坯强度的方法 | Metallic powder - Determination of green strength by compression of cylinder compacts | |
77.040.30 | H21 | GB/T 11107-1989 | 金属及其化合物粉末 比表面积和粒度测定 空气透过法 | Metallic and its compound powder - Determination of specific surface and particle size by air permeating method | |
77.040.30 | H21 | GB/T 11108-1989 | 硬质合金热扩散率的测定方法 | Test method for thermal diffusivity of hardmetal (carbide) | |
77.040 | H21 | GB/T 11111-1989 | 钨丝电阻连续测量方法 | Continual determination method of electric resistance for tungsten wires | |
77.040.30 | H21 | GB/T 11112-1989 | 有色金属大气腐蚀试验方法 | Non-ferrous metals atmospheric corrosion testing method | EQV ISO/DIS 8565-87 |
77.140.20 | H11 | GB/T 11170-1989 | 不锈钢的光电发射光谱分析方法 | Method for photoelectric emission spectroscopic analysis of stainless steel | |
77.140.60 | H49 | GB/T 11182-1989 | 橡胶软管强用钢丝 | Steel wire for hose reinfocement | |
77.140.50 | H46 | GB/T 11251-1989 | 合金结构钢热轧厚钢板 | Hot-rolled alloy structural steel plates | |
77.140.50 | H46 | GB/T 11252-1989 | 犁壁用热轧三层钢板和宽钢带 | Hot-rolled tri-clad plates and wide strips for plough wall | NEQ ΓOCT 6765-75 |
77.140.50 | H46 | GB/T 11253-1989 | 碳素结构钢和低合金结构钢冷轧薄钢板及钢带 | Cold-rolled plain carbon and low alloy structural steel sheets and strips | |
77.140.50 | H46 | GB/T 11254-1989 | 压缩机阀片用热轧薄钢板 | Hot rolled steel sheets for compressor valves | NEQ ΓOCT 11268-76 |
77.040.20 | H26 | GB/T 11259-1999 | 超声波检验用钢对比试块的制作与校验方法 | Standard practice for fabrication and control of steel reference blocks used in ultrasonic inspection | EQV ASTM E 428:1992 |
77.040.20 | H26 | GB/T 11260-1996 | 圆钢穿过式涡流探伤检验方法 | Round steel--The inspection method for pass type eddy current test | EQV JIS G 0568-1993 |
77.140.20 | H25 | GB/T 11261-1989 | 高碳铬轴承钢化学分析法 脉冲加热惰气熔融- 红外线吸收法测定氧量 | Methods for chemical analysis of high carbon chromium bearing steel The pulse heating inert gas fusion-infra red absorption method for the determination of oxygen content | |
77.140.70 | H44 | GB/T 11263-1998 | 热轧H型钢和剖分T型钢 | The hot-rolled H and cut T section steel | EQV JIS G 3192-1994 |
77.140.70 | H52 | GB/T 11264-1989 | 轻轨 | Light rails | |
77.140.70 | H52 | GB/T 11265-1989 | 轻轨用接头夹板 | Fish plates for light rails | |
77.140.70 | H52 | GB/T 11266-1989 | 轻轨用垫板 | Tie plates for light rails | |
77.040 | H24 | GB/T 11346-1989 | 铝合金铸件X 射线照相检验针孔(圆形)分级 | Radiographs for inspection grading of gas porosity (round) in aluminum alloy casting | |
77.140.80 | J31 | GB/T 11351-1989 | 铸件重量公差 | Mass tolerances for castings | |
77.140.80 | J31 | GB/T 11352-1989 | 一般工程用铸造碳钢件 | Carbon steel castings for general engineering purposes | NEQ ISO 3755-75 |
77.040.30 | J36 | GB/T 11354-1989 | 钢铁零件 渗氮层深度测定和金相组织检验 | Steel-iron parts - Determination of nitrided case depth and metallographic examination of nitriding structure | |
ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) | 国際整合 |
77.040.10 | H22 | GB/T 12347-1996 | 钢丝绳弯曲疲劳试验方法 | Steel wire rope--Bending fatigue testing | NEQ ISO 2020-1984 |
77.140.80 | J32 | GB/T 12361-1990 | 钢质模锻件 通用技术条件 | General specification of steel die forgings | |
77.140.80 | J32 | GB/T 12362-1990 | 钢质模锻件 公差及机械加工余量 | Tolerances and machining allowances of steel die forgings | NEQ DIN 7526 |
77.140.80 | J32 | GB/T 12363-1990 | 锻件功能分类 | Classification of forging functions | |
77.040.10 | H22 | GB/T 12443-1990 | 金属扭应力疲劳试验方法 | Metallic materials - Torsional stress fatigue testing | NEQ ISO 1352-77 |
77.040.10 | H23 | GB/T 12444.1-1990 | 金属磨损试验方法 MM型磨损试验 | Metallic materials - Wear tests - MM mode wear test | |
77.040.10 | H23 | GB/T 12444.2-1990 | 金属磨损试验方法 环块型磨损试验 | Metallic materials - Wear tests - Block-on-ring wear test | |
77.040.30 | E30 | GB/T 12582-1990 | 液态烃类电导率测定法 (精密静电计法) | Liquid hydrocarbons - Determination of electrical conductivity - Precision meter | NEQ ASTM D4308-83 |
77.040.20 | H26 | GB/T 12604.1-1990 | 无损检测术语 超声检测 | Terminology for nondestructive testing - Ultrasonic testing | |
77.040.20 | H26 | GB/T 12604.2-1990 | 无损检测术语 射线检测 | Terminology for nondestructive testing - Radiographic testing | |
77.040.20 | H26 | GB/T 12604.3-1990 | 无损检测术语 渗透检测 | Terminology for nondestructive testing - Penetrant testing | |
77.040.20 | H26 | GB/T 12604.4-1990 | 无损检测术语 声发射检测 | Terminology for nondestructive testing - Acoustic emission testing | |
77.040.20 | H26 | GB/T 12604.5-1990 | 无损检测术语 磁粉检测 | Termonology for nondestructive testing - Magnetic particle testing | |
77.040.20 | H26 | GB/T 12604.6-1990 | 无损检测术语 涡流检测 | Terminology for nondestructive testing - Eddy current testing | |
77.040.20 | H26 | GB/T 12606-1999 | 钢管漏磁探伤方法 | Steel tubes--The testing method of magnetic flux leakage | EQV ISO 9402:1989
EQV ISO 9598:1989 |
77.120.60 | H13 | GB/T 12689.1-1990 | 锌及锌合金化学分析方法 EDTA滴定法测定铝量 | Zinc and zinc alloys - Determination of aluminium content - EDTA titrimetric method | EQV ASTM E536-84 |
77.120.60 | H13 | GB/T 12689.2-1990 | 锌及锌合金化学分析方法 二乙基二硫代氨基甲酸铅分光光度法测定铜量 | Zinc and zinc alloys - Determination of copper content - Lead diethyldithio-carbamate spectrophotometric method | |
77.120.60 | H13 | GB/T 12689.3-1990 | 锌及锌合金化学分析方法 磺基水杨酸分光光度法测定铁量 | Zinc and zinc alloys - Determination of iron content - Sultosalicylic acid spectrophotometric method | |
77.120.60 | H13 | GB/T 12689.4-1990 | 锌及锌合金化学分析方法 钼蓝分光光度法测定砷量 | Zinc and zinc alloys - Determination of arsenic content - Molybdenum blue spectrophotometric method | |
77.120.60 | H13 | GB/T 12689.5-1990 | 锌及锌合金化学分析方法 钼蓝分光光度法测定硅量 | Zinc and zinc alloys - Determination of silicon content - Molybdenum blue spectrophotometric method | EQV ГOCT 25284.8-84 |
77.120.60 | H13 | GB/T 12689.6-1990 | 锌及锌合金化学分析方法 苯芴酮- 溴化十六烷基三甲胺分光光度法测定锡量 | Zinc and zinc alloys - Determination of tin content - Phenylfluorone-cetyltrimethyla-mmonium bromide spectrophotometric method | |
77.120.60 | H13 | GB/T 12689.7-1990 | 锌及锌合金化学分析方法 火焰原子吸收光谱法测定镁量 | Zinc and zinc alloys - Determination of magnesium content - Flame atomic absorption spectrometric method | EQV ISO 3750-76 |
77.120.60 | H13 | GB/T 12689.8-1990 | 锌及锌合金化学分析方法 火焰原子吸收光谱法测定铁量 | Zinc and zinc alloys - Determination of iron content - Flame atomic absorption spectrometric method | EQV ГOCT 25284.6-82 |
77.120.60 | H13 | GB/T 12689.9-1990 | 锌及锌合金化学分析方法 火焰原子吸收光谱法测定铜量 | Zinc and zinc alloys - Determination of copper content - Flame atomic absorption spectrometric method | EQV ASTM E536-84 |
77.120.60 | H13 | GB/T 12689.10-1990 | 锌及锌合金化学分析方法 火焰原子吸收光谱法测定铅量 | Zinc and zinc alloys - Determination of lead content - Flame atomic absorption spectrometric method | EQV ASTM E536-84 |
77.120.60 | H13 | GB/T 12689.11-1990 | 锌及锌合金化学分析方法 火焰原子吸收光谱法测定锑量 | Zinc and zinc alloys - Determination of antimony content - Flame atomic absorption spectrometric method | EQV ГOCT 23957.1-80 |
77.120.60 | H13 | GB/T 12689.12-1990 | 锌及锌合金化学分析方法 火焰原子吸收光谱法测定镉量 | Zinc and zinc alloys - Determination of cadmium content - Flame atomic absorption spectrometric method | EQV ASTM D536-84 |
77.120.60 | H13 | GB/T 12689.13-1990 | 锌及锌合金化学分析方法 电热原子吸收光谱法测定铝量 | Zinc and zinc alloys - Determination of aluminium content - Electrothermal atomic absorption spectrometric method | |
77.120.60 | H13 | GB/T 12689.14-1990 | 锌及锌合金化学分析方法 铬天青S 分光光度法测定铝量 | Zinc and zinc alloys - Determination of aluminium content - Chromazurol S spectrophotometric method | |
77.120.70 | H14 | GB/T 12690.1-1990 | 稀土金属及其氧化物化学分析方法 电感耦合等离子发射光谱法测定氧化镧中氧化铈、氧化镨、氧化钕、氧化钐、氧化钇量 | Lanthanum oxide - Determination of cerium oxide, praseodymium oxide, nedeodynium oxide, samarium oxide and yttrium oxide - Induetively coupled plasma atomic emission spectrographic method | |
77.120.70 | H14 | GB/T 12690.2-1990 | 稀土金属及其氧化物化学分析方法 发射光谱法测定氧化镧中氧化钕、氧化铈、氧化镨、氧化钐和氧化钇量 | Lanthanum oxide - Determination of neodymium oxide, cerium oxide, praseodymium oxide, samarium oxide and yttrium oxide contents - Emission spectrographic method | |
77.120.70 | H14 | GB/T 12690.3-1990 | 稀土金属及其氧化物化学分析方法 发射光谱法测定金属铈及氧化铈中氧化镧、氧化镨、氧化钕、氧化钐和氧化钇量 | Cerium and cerium oxide - Determination of lanthanum oxide, praseodymium oxide, neodymium oxide, samarium oxide and yttrium oxide contents--Emission spectrographic method | |
77.120.70 | H14 | GB/T 12690.4-1990 | 稀土金属及其氧化物化学分析方法 化学光谱法测定氧化铈中氧化镧、氧化镨、氧化钕、氧化钐和氧化钇量 | Cerium oxide?Determination of lanthanum oxide, praseodymium oxide, neodymium oxide, samarium oxide and yttrium oxide contents?Spectro chemical method | |
77.120.70 | H14 | GB/T 12690.5-1990 | 稀土金属及其氧化物化学分析方法 X 射线荧光光谱法测定氧化镨中氧化镧、氧化铈、氧化钕、氧化钐和氧化钇量 | Praseodymium oxide - Determination of lanthanum oxide, cerium oxide, neodymium oxide, samarium oxide and yttrium oxide contents - X ray fluorescence spectrometric method | |
77.120.70 | H14 | GB/T 12690.6-1990 | 稀土金属及其氧化物化学分析方法 发射光谱法测定氧化镨中氧化镧、氧化铈、氧化钕、氧化钐和氧化钇量 | Praseodymium oxide - Determination of lanthanum oxide, cerium oxide, neodymium oxide, samarium oxide and yttrium oxide contents - Emission spectrographic method | |
77.120.70 | H14 | GB/T 12690.7-1990 | 稀土金属及其氧化物化学分析方法 X 射线荧光光谱法测定金属钕和氧化钕中氧化镧、氧化铈、氧化镨、氧化钐和氧化钇量 | Neodymium and neodymium oxide?Determination of lanthanum oxide, cerium oxide, praseodymium oxide, samarium oxide, yttrium oxide contents--X-ray fluorescence spectrometic method | |
77.120.70 | H14 | GB/T 12690.8-1990 | 稀土金属及其氧化物化学分析方法 发射光谱法测定金属钕氧化钕中氧化镧、氧化铈、氧化镨、氧化钐和氧化钇量 | Neodymium and neodymium oxide - Determination of lanthanum oxide, cerium oxide, praseodymium oxide, samarium oxide and yttrium oxide contents - Emission spectrographic method | |
77.120.70 | H14 | GB/T 12690.9-1990 | 稀土金属及其氧化物化学分析方法 化学光谱法测定氧化钕中氧化镧、氧化铈、氧化镨、氧化钐和氧化钇量 | Neodymium oxide - Determination of lonthanum oxide, cerium oxide, praseodymium oxide, samarium oxide and yttrium oxide contents - Spectro chemical method | |
77.120.70 | H14 | GB/T 12690.10-1990 | 稀土金属及其氧化物化学分析方法 发射光谱法测定氧化钆中氧化钐、氧化铕、氧化铽、氧化镝和氧化钇量 | Gadolinium oxide - Determination of samarium oxide, europium oxide, terbium oxide, dysprosium oxide and yttrium oxide contents - Emission spectrographic method | |
77.120.70 | H14 | GB/T 12690.11-1990 | 稀土金属及其氧化物化学分析方法 发射光谱法测定氧化铽中氧化镧,氧化铈,氧化镨,氧化钕,氧化钐,氧化铕,氧化钆,氧化镝,氧化钬,氧化铒和氧化钇量 | Gadolinium oxide - Determination of samarium oxide, europium oxide, terbium oxide, dysprosium oxide and yttrium oxide contents - Emission spectrographic method | |
77.120.70 | H14 | GB/T 12690.12-1990 | 稀土金属及其氧化物化学分析方法 脉冲- 红外吸收法测定金属钕、金属钐中氧量 | Neodymium and samarium--Determination of oxygen content - Impulse-infrared absorption method | |
77.120.70 | H14 | GB/T 12690.13-1990 | 稀土金属及其氧化物化学分析方法 高频-红外吸收法测定金属钕、金属钐中碳量 | Neodymium and samarium - Determination of carbon content - High frequency-infrared absorption method | |
77.120.70 | H14 | GB/T 12690.14-1990 | 稀土金属及其氧化物化学分析方法 发射光谱法测定氧化镧、氧化铈、氧化钕、氧化钆中钴、铁、锰、铅、铬、镍、铜、锌的氧化物量 | Lanthanum oxide, cerium oxide, neodymium oxide, gadolinium oxide - Determination of cobalt, iron, manganese, nichel, copper, ckromium, lead and zinc in oxides contents - Emission spectrographic method | |
77.120.70 | H14 | GB/T 12690.15-1990 | 稀土金属及其氧化物化学分析方法 偶氮胂V分光光度法测定钍量 | Rare-earth metals and their oxides?Determination of thorium content?Arsenazo V spectrophotometric method | |
77.120.70 | H14 | GB/T 12690.16-1990 | 稀土金属及其氧化物化学分析方法 火焰原子吸收光谱法测定钙量 | Rare-earth metals and their oxides - Determination of calcium content - Flame atomic absorption spectrometric method | |
77.120.70 | H14 | GB/T 12690.17-1990 | 稀土金属及其氧化物化学分析方法 氧化亚氮-乙炔火焰原子吸收光谱法测定钙量 | Rare-earth metals and their oxides - Determination of calcium content - Nitrous oxide-acetylene flame atomic absorption spectrometric method | |
77.120.70 | H14 | GB/T 12690.18-1990 | 稀土金属及其氧化物化学分析方法 硫氰酸汞- 硝酸铁分光光度法测定氯量 | Rare-earth metal oxides?Determination of chlorine content - Mercury sulphoeyanie-iron nitrate spectrophotometric method | |
77.120.70 | H14 | GB/T 12690.19-1990 | 稀土金属及其氧化物化学分析方法 1.10- 二氮杂菲分光光度法测定铁量 | Rare-earth metals and their oxides - Determination of iron content - 1.10-phenantroline spectrophotometric method | |
77.120.70 | H14 | GB/T 12690.20-1990 | 稀土金属及其氧化物化学分析方法 硫氰酸钾、1.10- 二氮杂菲分光光度法测定铁量 | Rare-earth metals and their oxides - Determination of iron content - Potassium thiocyanate, 1,10-phenanthro line spectrophotometric method | |
77.120.70 | H14 | GB/T 12690.21-1990 | 稀土金属及其氧化物化学分析方法 钼蓝分光光度法测定磷量 | Rare-earth metals and their oxides - Determination of phosphorus content - Molybdenum blue spectrophotometric method | |
77.120.70 | H14 | GB/T 12690.22-1990 | 稀土金属及其氧化物化学分析方法 钼蓝分光光度法测定稀土氧化物中的二氧化硅量 | Rare-earth oxides - Determination of silicon oxide - Molybdenum blue spectrophotometric method | |
77.120.70 | H14 | GB/T 12690.23-1990 | 稀土金属及其氧化物化学分析方法 钼蓝分光光度法测定酸溶硅量 | Rare-earth metals and their oxides - Determination of acid soluble silicon oxide - Molybdenum blue spectrophotometric method | |
77.120.70 | H14 | GB/T 12690.24-1990 | 稀土金属及其氧化物化学分析方法 AL-CAS-CTMAB- 乙醇四元体系分光光度法测定铝量 | Rare-earth metals and their oxides - Determination of aluminum content - Aluminium-chromazurol-hexadecyl-trimethyl ammonium bromide-ethanol spectrophotometric method | |
77.120.70 | H14 | GB/T 12690.25-1990 | 稀土金属及其氧化物化学分析方法 火焰原子吸收光谱法测定镁量 | Rare-earth metals and their oxides - Determination of magnesium content - Flame atomic absorption spectrometric method | |
77.120.70 | H14 | GB/T 12690.26-1990 | 稀土金属及其氧化物化学分析方法 火焰原子吸收光谱法测定钠量 | Rare-earth metals and their oxides - Determination of sodium content - Flame atomic absorption spectrometric method | |
77.120.70 | H14 | GB/T 12690.27-1990 | 稀土金属及其氧化物化学分析方法 重量法测定灼减量 | Rare-earth metals and their oxides - Determination of ignition loss - Gravimetric method | |
77.120.70 | H14 | GB/T 12690.28-2000 | 稀土金属及其氧化物化学分析方法 电感耦合等离子体发射光谱法测定稀土氧化物中氧化钙量 | Rare earth metals and their oxide--Determination of calcium oxide content--Inductively coupled plasma atomic emission spectrographic method | |
77.120.70 | H14 | GB/T 12690.29-2000 | 稀土金属及其氧化物化学分析方法 荧光光度法测定稀土氧化物中氧化铈量 | Rare earth metals and their oxide--Determination of cerium oxide content--Fluorescent spectrophotometric method | |
77.140.50 | H46 | GB/T 12754-1991 | 彩色涂层钢板及钢带 | Coloured paint coat steel plates and strips | |
77.140.50 | H46 | GB/T 12755-1991 | 建筑用压型钢板 | Roll-profiled steel sheet for building | |
77.180 | H91 | GB/T 12762-1991 | 鼓风烧结机 | Updraft sintering machine | |
77.040.30 | H72 | GB/T 12767-1991 | 粉末冶金制品 表面粗糙度 参数及其数值 | Powder metallurgy products - Surface roughness - Parameters and their values | |
77.120.10 | H61 | GB 12768-1991 | 重熔用电工铝锭 | Electrical aluminium ingots for remelting | |
77.120.50 | H61 | GB/T 12769-1991 | 钛铜复合棒 | Titanium-clad copper bar | |
77.140.60 | H44 | GB/T 12773-1991 | 内燃机气阀钢钢棒技术条件 | Valve steel bars for internal combustion engines - Technical requirements | |
77.040.10 | H22 | GB/T 12778-1991 | 金属夏比冲击断口测定方法 | Metallic materials - Determination of Charpy impact fracture surface | NEQ ASTM E23-88 |
77.040.20 | H21 | GB/T 12966-1991 | 铝合金电导率涡流测试方法 | The method for electrical conductivity measurement of aluminium alloys by use of eddy current | NEQ ASTM B342-67 |
77.040.20 | H21 | GB/T 12968-1991 | 纯金属电阻率与剩余电阻比涡流衰减测量方法 | Eddy current decay method for measurement of resistivity and residual resistance ratio of pure metals | |
77.040.20 | H21 | GB/T 12969.1-1991 | 钛及钛合金管材超声波检验方法 | Method of ultrasonic testing for titanium and titanium alloy tubes | |
77.040.20 | H21 | GB/T 12969.2-1991 | 钛及钛合金管材涡流检验方法 | Method of eddy current testing for titanium and titanium alloy tubes | |
ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) | 国際整合 |
77.040 | H21 | GB/T 13012-1991 | 钢材直流磁性能测量方法 | Solid steels - Methods of measurement of the d.c. magnetic properties | |
77.140.60 | H44 | GB 13013-1991 | 钢筋混凝土用热轧光圆钢筋 | Hot rolled plain steel bars for the reinforcement of concrete | |
77.140.60 | H44 | GB 13014-1991 | 钢筋混凝土用余热处理钢筋 | Remained heat treatment ribbed steel bars for the reinforcement of concrete | |
77.140.50 | U05 | GB/T 13147-1991 | 铜与铜合金复合钢板焊接技术条件 | The specification for welding of copper and copper alloy clad steel plate | |
77.140.50 | U05 | GB/T 13148-1991 | 不锈钢复合钢板焊接技术条件 | Specification for welding of stainless steel clad steel plate | |
77.140.50 | U05 | GB/T 13149-1991 | 钛及钛合金复合钢板焊接技术条件 | Specification for welding of titanium and titanium alloy clad steel plate | |
77.040.20 | H21 | GB/T 13220-1991 | 细粉末粒度分布的测定 声波筛分法 | Determination of particle size distribution of fine powder - Method of sieve classfication with sonic wave | |
77.040.20 | H21 | GB/T 13221-1991 | 超细粉末粒度分布的测定 X 射线小角散射法 | Ultrafine powder?Determination of particle size distribution - Small-angle X-ray scattering method | |
77.140.50 | H46 | GB/T 13237-1991 | 优质碳素结构钢热轧薄钢板和钢带 | Cold-rolled quality carbon structural steel sheets and strips | NEQ ГOCT 16523-70 |
77.140.50 | H46 | GB/T 13238-1991 | 铜钢复合钢板 | Copper-steel clad plates | |
77.040.10 | H22 | GB/T 13239-1991 | 金属低温拉伸试验方法 | Metallic materials - Tensile testing at low temperatures | |
77.040.30 | H11 | GB/T 13247-1991 | 铁合金产品粒度的取样和检测方法 | Ferroalloys - Sampling and testing methods for determination of grain size | |
77.040 | U06 | GB/T 13288-1991 | 涂装前钢材表面粗糙度等级的评定 (比较样块法) | The assessment of profile grades of steel surface before application of paint and related products?Comparator | NEQ ISO 8503-85 |
77.120.30 | H13 | GB/T 13293.1-1991 | 高纯阴极铜化学分析方法 催化示波极谱法测定硒、碲量 | Higher purity copper cathode - Determination of selenium and tellurum contents - Catalytic oscillopolarographic method | |
77.120.30 | H13 | GB/T 13293.2-1991 | 高纯阴极铜化学分析方法 氢化物发生- 无色散原子荧光光谱法测定铋量 | Higher purity copper cathode - Determination of bismuth content - Hydride generation-atomic fluorescence spectrometric method | |
77.120.30 | H13 | GB/T 13293.3-1991 | 高纯阴极铜化学分析方法 塞曼效应电热原子吸收光谱法测定铬、锰、镉量 | Higher purity copper cathode - Determination of chromium, manganese and cadmium contents - Zeeman effect electrothermal atomic absorption spectrometric method | |
77.120.30 | H13 | GB/T 13293.4-1991 | 高纯阴极铜化学分析方法 5-Br-PADAP分光光度法测定锑量 | Higher purity copper cathode - Determination of antimony content - 2-[(-5-bromo-2-pyridyl)azo]-5-diethylaminophenol spectrophotometric method | |
77.120.30 | H13 | GB/T 13293.5-1991 | 高纯阴极铜化学分析方法 砷钼杂多酸- 结晶紫分光光度法测定砷量 | Higher purity copper cathode - Determination of arsenic content - Heteropoly arsenomolybdic acid-crystal violet spectrophotometric method | |
77.120.30 | H13 | GB/T 13293.6-1991 | 高纯阴极铜化学分析方法 磷钒钼杂多酸- 结晶紫分光光度法测定磷量 | Higher purity copper cathode - Determination of phosphorus content - Heteropoly phosphato-vanadato-molybdicacid-crystal violet spectrophotometric method | |
77.120.30 | H13 | GB/T 13293.7-1991 | 高纯阴极铜化学分析方法 塞曼效应电热原子吸收光谱法测定铁、钴、铅量 | Higher purity copper cathode - Determination of iron, cobalt and lead contents - Zeeman effect electrothermal atomic absorption spectrometric method | |
77.120.30 | H13 | GB/T 13293.8-1991 | 高纯阴极铜化学分析方法 塞曼效应电热原子吸收光谱法测定镍量 | Higher purity copper cathode - Determination of nickel content - Zeeman effect electrothermal atomic absorption spectrometric method | |
77.120.30 | H13 | GB/T 13293.9-1991 | 高纯阴极铜化学分析方法 塞曼效应电热原子吸收光谱法测定锡量 | Higher purity copper cathode - Determination of tin content - Zeeman effect electrothermal atomic absorption spectrometric method | |
77.120.30 | H13 | GB/T 13293.10-1991 | 高纯阴极铜化学分析方法 火焰原子吸收光谱法测定锌量 | Higher purity copper cathode - Determination of zinc content - Flame atomic absorption spectrometric method | |
77.120.30 | H13 | GB/T 13293.11-1991 | 高纯阴极铜化学分析方法 钼蓝分光光度法测定硅量 | Higher purity copper cathode - Determination of silicon content - Molybdenum blue spectrophotometric method | |
77.120.30 | H13 | GB/T 13293.12-1991 | 高纯阴极铜化学分析方法 巯基棉分离- 火焰原子吸收光谱法测定银量 | Higher purity copper cathode - Determination of silver content - Separation and preconcentration with sulfhydryl cotton-flame atomic absorption spectrometric method | |
77.120.30 | H13 | GB/T 13293.13-1991 | 高纯阴极铜化学分析方法 燃烧- 碘酸钾滴定法测定硫量 | Higher purity copper cathode - Determination of sulphur content - Combustion-potassium iodate titrimetric method | |
77.120 | H58 | GB/T 13297-1991 | 精密合金包装、标志和质量证明书的一般规定 | General rules for packaging, marking and certification of precision alloys | |
77.040.30 | H24 | GB/T 13298-1991 | 金属显微组织检验方法 | Metal - Inspection method of microstructure | |
77.040.30 | H24 | GB/T 13299-1991 | 钢的显微组织评定方法 | Steel - Determination of microstructure | |
77.040.30 | H21 | GB/T 13300-1991 | 高电阻电热合金快速寿命试验方法 | High resistance alloys for electrical heating - Testing method for accelerated life | NEQ ГOCT 2419-78 |
77.040.30 | H21 | GB/T 13301-1991 | 金属材料电阻应变灵敏系数试验方法 | Metals - Testing method for sensitivity of electrical resistance strain | NEQ ASTM E251-86 |
77.040.30 | H24 | GB/T 13302-1991 | 钢中石墨碳显微评定方法 | Steel - Determination of area content of graphite-micrographic method using diagrams | |
77.040.30 | H21 | GB/T 13303-1991 | 钢的抗氧化性能测定方法 | Steels - Determination method of oxidation resistance | |
77.080.20 | H40 | GB/T 13304-1991 | 钢分类 | Steels - Classification | NEQ ISO 4948/1~2 |
77.040.30 | H24 | GB/T 13305-1991 | 奥氏体不锈钢中α-相面积含量金相测定法 | Austenitic stainless steels - Determination of area content of the α-phase - Micrographic method using standard diagrams | |
77.040.10 | H94 | GB/T 13313-1991 | 轧辊肖氏硬度试验方法 | Method of Shore hardness testing for mill rolls | |
77.180 | H94 | GB/T 13314-1991 | 锻钢冷轧工作辊通用技术条件 | General specifications of forged steel working rolls for cold rolling | |
77.040.20 | H94 | GB/T 13315-1991 | 锻钢冷轧工作辊超声波探伤方法 | Method of ultrasonic inspection for forged steel cold rolling working rolls | |
77.040.20 | H94 | GB/T 13316-1991 | 铸钢轧辊超声波探伤方法 | Method of ultrasonic inspection for cast steel rolls | |
77.040.30 | J32 | GB/T 13320-1991 | 钢质模锻件 金相组织评级图及评定方法 | Metallographic grading atlas and assessing method for steel die forgings | |
77.040.10 | J04 | GB/T 13321-1991 | 钢铁硬度 锉刀检验方法 | The method of hardness testing on iron and steel with file | |
77.040.30 | H21 | GB/T 13390-1992 | 金属粉末比表面积的测定 氮吸附法 | Metallic powder - Determination of the specific surface area - Method of nitrogen adsorption | |
77.140.30 | H43 | GB 13447-1992 | 无缝气瓶用钢坯 | Steel blank for seamless gas cylinder | |
77.040 | H21 | GB/T 13448-1992 | 彩色涂层钢板及钢带试验方法 | Test methods for colour-coated steel plates and strips | |
77.120.70 | H65 | GB/T 13559-1992 | 金属钇 | Yttrium metal | |
77.150.99 | H65 | GB/T 13560-2000 | 烧结钕铁硼永磁材料 | Materials for sintered neodymium iron boron permanent magnets | |
77.120.10 | H61 | GB/T 13586-1992 | 铝及铝合金废料、废件分类和技术条件 | Classification and specification for scraps and waste componet of aluminium and aluminium alloy | NEQ ГOCT 1639-78 |
77.120.30 | H62 | GB/T 13587-1992 | 铜及铜合金废料、废件分类和技术条件 | Classification and specification for scraps and waste componet of copper and copper alloy | NEQ ГOCT 1639-78 |
77.120.60 | H62 | GB/T 13588-1992 | 铅及铅合金废料、废件分类和技术条件 | Classification and specification for scraps and waste componet of lead and lead alloy | NEQ ГOCT 1639-78 |
77.120.60 | H62 | GB/T 13589-1992 | 锌及锌合金废料、废件分类和技术条件 | Classification and specification for scraps and waste componet of zinc and zinc alloy | NEQ ГOCT 1639-78 |
77.040.10 | N74 | GB/T 13634-2000 | 试验机检验用测力仪的校准 | Calibration of force-proving instruments used for the verification of testing machines | IDT ISO 376:1999 |
77.040.10 | H23 | GB/T 13665-1992 | 金属阻尼材料阻尼本领试验方法 扭摆法和弯曲共振法 | Test method for damping capacity of metallic damping materials - Torsion pendulum method and Flexural resonance method | |
77.060 | U05 | GB/T 13671-1992 | 不锈钢缝隙腐蚀电化学试验方法 | Stainless steels - Method of electrochemical test for crevice corrosion | |
77.120.70 | H14 | GB/T 13747.1-1992 | 锆及锆合金化学分析方法 锡量测定 | Zirconium and zirconium alloys--Determination of tin content | |
77.120.70 | H14 | GB/T 13747.2-1992 | 锆及锆合金化学分析方法 1,10-二氮杂菲分光光度法测定铁量 | Zirconium and zirconium alloys--Determination of iron content-1,10-phenanthroline spectrophotometric method | |
77.120.70 | H14 | GB/T 13747.3-1992 | 锆及锆合金化学分析方法 丁二酮肟分光光度法测定镍量 | Zirconium and zirconium alloys--Determination of nickel centent--Dimethylglyoxime spectrophotometric method | |
77.120.70 | H14 | GB/T 13747.4-1992 | 锆及锆合金化学分析方法 二苯卡巴肼分光光度法测定铬量 | Zirconium and zirconium alloys--Determination of chromium content--Diphenylcarbazide spectrophotometric method | |
77.120.70 | H14 | GB/T 13747.5-1992 | 锆及锆合金化学分析方法 铬天青S分光光度法测定铝量 | Zirconium and zirconium alloys--Determination of aluminium content--Chrome azurol S spectrophotometric method | |
77.120.70 | H14 | GB/T 13747.6-1992 | 锆及锆合金化学分析方法 2,9-二甲基-1,10- 二氮杂菲分光光度法测定铜量 | Zirconium and zirconium alloys--Determination of copper content-2,9-dimethyl--1,10-phenanthroline spectrophotometric method | |
77.120.70 | H14 | GB/T 13747.7-1992 | 锆及锆合金化学分析方法 高碘酸盐分光光度法测定锰量 | Zirconium and zirconium alloys--Determination of manganese content--Patassium periodate spectrophotometric method | |
77.120.70 | H14 | GB/T 13747.8-1992 | 锆及锆合金化学分析方法 亚硝基R盐分光光度法测定钴量 | Zirconium and zirconium alloys--Determination of cobalt content-1-nitroso-2-hydroxy-3,6-naphthalene-disulfonic acid (sodium salt) spectrophotometric method | |
77.120.70 | H14 | GB/T 13747.9-1992 | 锆及锆合金化学分析方法 火焰原子吸收光谱法测定镁量 | Zirconium and zirconium alloys--Determination of magesium content--Flame absorption spectrometric method | |
77.120.70 | H14 | GB/T 13747.10-1992 | 锆及锆合金化学分析方法 硫氰酸盐分光光度法测定钨量 | Zirconium and zirconium alloys--Determination of tungsten content--Thiocyanate spectrophotometric method | |
77.120.70 | H14 | GB/T 13747.11-1992 | 锆及锆合金化学分析方法 硫氰酸盐分光光度法测定钼量 | Zirconium and zirconium alloys--Determination of molybdenum content--Thiocyanate spectrophotometric method | |
77.120.70 | H14 | GB/T 13747.12-1992 | 锆及锆合金化学分析方法 钼蓝分光光度法测定硅量 | Zirconium and zirconium alloys--Determination of silicon content--Molybdenum blue spectrophotometric method | |
77.120.70 | H14 | GB/T 13747.13-1992 | 锆及锆合金化学分析方法 示波极谱法测定铅量 | Zirconium and zirconium alloys--Determination of lead content--Oscillopolarographic method | |
77.120.70 | H14 | GB/T 13747.14-1992 | 锆及锆合金化学分析方法 催化示波极谱法测定铀量 | Zirconium and zirconium alloys--Determination of uranium content--Catalytic-oscillopolarographic method | |
77.120.70 | H14 | GB/T 13747.15-1992 | 锆及锆合金化学分析方法 姜黄素分光光度法测定硼量 | Zirconium and zirconium alloys--Determination of boron content--Curcumin spectrophotometric method | |
77.120.70 | H14 | GB/T 13747.16-1992 | 锆及锆合金化学分析方法 氯化银浊度法测定氯量 | Zirconium and zirconium alloys--Determination of chloric content--Silver chloride nephelometry method | |
77.120.70 | H14 | GB/T 13747.17-1992 | 锆及锆合金化学分析方法 示波极谱法测定镉量 | Zirconium and zirconium alloys--Determination of cadmium content--Oscillopolarographic method | |
77.120.70 | H14 | GB/T 13747.18-1992 | 锆及锆合金化学分析方法 苯甲酰苯基羟胺分光光度法测定钒量 | Zirconium and zirconium alloys--Determination of vandium content--N-benzoyl-N-phenylhydroxylamine spectrophotometric method | |
77.120.70 | H14 | GB/T 13747.19-1992 | 锆及锆合金化学分析方法 二安替比林甲烷分光光度法测定钛量 | Zirconium and zirconium alloys--Determination of titanium content--Diantipyrylmethane spectrophotometric method | |
77.120.70 | H14 | GB/T 13747.20-1992 | 锆及锆合金化学分析方法 发射光谱法测定铪量 | Zirconium and zirconium alloys--Determination of hafnium content--Emission spectrographic method | |
77.120.70 | H14 | GB/T 13747.21-1992 | 锆及锆合金化学分析方法 真空加热气相色谱法测定氢量 | Zirconium and zirconium alloys--Determination of hydrogen content--Vacuum heating chromatographic method | |
77.120.70 | H14 | GB/T 13747.22-1992 | 锆及锆合金化学分析方法 惰气熔融库仑法测定氧量 | Zirconium and zirconium alloys--Determination of oxygen content--Inert gas fusion coulometric method | |
77.120.70 | H14 | GB/T 13747.23-1992 | 锆及锆合金化学分析方法 蒸馏分离-奈斯勒试剂分光光度法测定氮量 | Zirconium and zirconium alloys--Determination of nitrogen content--Distillation-nessler reagent spectro-photometric method | |
77.120.70 | H14 | GB/T 13747.24-1992 | 锆及锆合金化学分析方法 库仑法测定碳量 | Zirconium and zirconium alloys--Determination of carbon content--Combustion coulometric method | |
77.140.60 | H44 | GB 13788-2000 | 冷轧带肋钢筋 | Cold rolled ribbed steel wires and bars | NEQ ISO 10544:1992 |
77.140.50 | H46 | GB/T 13790-1992 | 日用搪瓷用冷轧薄钢板和钢带 | Cold rolled sheets and strips for civil enameling | |
77.140.70 | H44 | GB/T 13791-1992 | 冷拉异型钢 | Cold drawn special shaped steel bar | NEQ JIS G3123 |
77.140.60 | H46 | GB/T 13795-1992 | 工业链条用冷轧钢带 | Cold-rolled steel strips for industial chain | |
77.140 | H44 | GB/T 13796-1992 | 工业链条用冷拉钢 | Cold-drawn steels for industrial chain | |
77.120.30 | H62 | GB/T 13808-1992 | 铜及铜合金挤制棒 | Wrought copper and copper alloys--Extruded rods and bars | NEQ JIS H 3250-86 |
77.120.30 | H62 | GB/T 13809-1992 | 铜及铜合金矩形棒 | Wrought copper and copper alloy rectangular bars | NEQ ISO 6958-1984 |
77.120.30 | H62 | GB/T 13812-1992 | 黄铜磨光棒 | Ground brass rods | |
77.120.60 | J31 | GB/T 13818-1992 | 压铸锌合金 | Zinc die-casting alloys | |
77.120.30 | J31 | GB/T 13819-1992 | 铜合金铸件 | Copper alloy castings | |
77.120.20 | J31 | GB/T 13820-1992 | 镁合金铸件 | Magnesium alloy castings | IDT ASTM E 155-85 |
77.120.60 | J31 | GB/T 13821-1992 | 锌合金压铸件 | Zinc alloy die castings | NEQ ASTM B 86-88 |
77.120 | J31 | GB/T 13822-1992 | 压铸有色合金试样 | Test specimens for non ferrous diecasting alloys | |
77.140.20 | H72 | GB/T 13827-1992 | 烧结奥氏体不锈钢结构零件技术条件 | Standard specification for sintered austenitic stainless steel structural part | NEQ ASTM B525-83a |
77.140.80 | J32 | GB/T 13914-1992 | 冲压件尺寸公差 | Tolerance of dimensions for stampings | |
77.140.80 | J32 | GB/T 13915-1992 | 冲压件角度公差 | Tolerance of angles for stampings | |
77.140.80 | J32 | GB/T 13916-1992 | 冲压件形状和位置未注公差 | Unnoted tolerance of shape and position for stampings | |
ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) | 国際整合 |
77.040.20 | F86 | GB/T 14058-1993 | γ射线探伤机 | Apparatus for gamma radiography | NEQ ISO 3999-1977 |
77.140.60 | H46 | GB/T 14164-1993 | 石油天然气输送管用热轧宽钢带 | Hot-rolled wide strips for line pipe of oil and natural gas | NEQ DIN 17172-78 |
77.080 | H25 | GB/T 14165-1993 | K色金属室外大气暴露试验方法 | Ferrous metals--Test method of atmospheric exposure | NEQ ISO/DIS 8565-87 |
77.100 | H11 | GB/T 14203-1993 | 钢铁及合金光电发射光谱分析法通则 | General rule for photoelectric emission spectroscopic analysis of iron, steel and alloy | |
77.180 | J31 | GB/T 14235.1-1993 | 熔模铸造模料 熔点测定方法(冷却曲线法) | Testing method for melting point of pattern materials in investment casting | |
77.180 | J31 | GB/T 14235.2-1993 | 熔模铸造模料 抗弯强度测定方法 | Testing method for bending strength of pattern materials in investment casting | |
77.180 | J31 | GB/T 14235.3-1993 | 熔模铸造模料 灰分测定方法 | Testing method for ash content of pattern materials in investment casting | |
77.180 | J31 | GB/T 14235.4-1993 | 熔模铸造模料 线收缩率测定方法 | Testing method for linear contraction of pattern materials in investment casting | |
77.180 | J31 | GB/T 14235.5-1993 | 熔模铸造模料 表面硬度测定方法 | Testing method for surface hardness of pattern materials in investment casting | |
77.180 | J31 | GB/T 14235.6-1993 | 熔模铸造模料 酸值测定方法 | Testing method for acid number of pattern materials in investment casting | |
77.180 | J31 | GB/T 14235.7-1993 | 熔模铸造模料 流动性测定方法 | Testing method for fluidity of pattern materials in investment casting | |
77.180 | J31 | GB/T 14235.8-1993 | 熔模铸造模料 粘度测定方法 | Testing method for viscosity of pattern materials in investment casting | |
77.180 | J31 | GB/T 14235.9-1993 | 熔模铸造模料 热稳定性测定方法 | Testing method for thermal stability of pattern materials in investment casting | |
77.010 | H10 | GB/T 14265-1993 | 金属材料中氢、氧、氮、碳和硫分析方法通则 | General rule of chemical analysis for hydrogen, oxygen, nitrogen, carbon and sulfur in metal's materials | NEQ JIS Z2613 |
77.160 | H72 | GB/T 14266-1993 | 硬质合金旋转锉毛坯 | Blanks for carbide rotary burs | NEQ ISO 7755-83 |
77.140.60 | H44 | GB/T 14292-1993 | 碳素结构钢和低合金结构钢热轧条钢技术条件 | Hot-rolled long products technical requirements for carbon structure steel and low-alloy structure steel | NEQ ΓOCT 535-88 |
77.060 | A29 | GB/T 14293-1998 | 人造气氛腐蚀试验 一般要求 | Corrosion tests in artificial atmospheres--General requirement | EQV ISO 7384:1986 |
77.140.80 | J31 | GB/T 14408-1993 | 一般工程与结构用低合金铸钢件 | Low alloy steel castings for general engineering and structural purposes | |
77.160 | H72 | GB/T 14445-1993 | 煤炭采掘工具用硬质合金制品 | Cemented carbide for coal-mining tools | NEQ гOCT 880-75 |
77.140.60 | H49 | GB 14450-1993 | 胎圈用钢丝 | Bead wire | |
77.140.60 | H49 | GB/T 14451-1993 | 操纵用钢丝绳 | Steel wire ropes for control | NEQ JIS G 3540-88 |
77.040.10 | H22 | GB/T 14452-1993 | 金属弯曲力学性能试验方法 | Metallic materials--Determination of bending mechanical properties | NEQ ASTM E 855-90 |
77.040.10 | H21 | GB/T 14453-1993 | 金属材料高温弹性模量测量方法 圆盘振子法 | Metallic material--Standard test method for the elastic modulus at high temperature--The method of disc--Vibrator | |
77.040.10 | Y41 | GB/T 14454.1-1993 | 香料 试样制备 | Aromatics--Preparation of test sample | NEQ ISO 356-77 |
77.040.20 | N78 | GB/T 14480-1993 | 涡流探伤系统性能测试方法 | Standard practice for measuring the operating characteristics of eddy current flaw detecting system | NEQ NDIS 3102-84 |
77.120.70 | H63 | GB/T 14592-1993 | 钼圆片 | Molybdenum discs | |
77.120.30 | H62 | GB/T 14594-1993 | 无氧铜板和带 | Oxygen free copper sheets and strips | EQV JIS H 3510 |
77.120.70 | H65 | GB/T 14633-1993 | 灯用稀土红色、绿色、蓝色荧光粉 | Rare-earth phosphorus with red,green,blue luminescence for fluorescent lamp | |
77.120.70 | H14 | GB/T 14634.1-1993 | 灯用稀土红色、绿色、蓝色荧光粉试验方法 相对亮度测试方法 | Rare-earth phosphorus with red, green, blue luminescence for fluorescent lamp--Measuring method of relative brightness | |
77.120.70 | H14 | GB/T 14634.2-1993 | 灯用稀土红色、绿色、蓝色荧光粉试验方法 色品坐标测试方法 | Rare-earth phosphorus with red, green, blue luminescence for fluorescent lamp--Measuring method of chromaticity coordinates | |
77.120.70 | H14 | GB/T 14635.1-1993 | 稀土金属及其化合物化学分析方法 草酸盐重量法测定稀土总量 | Rare earth metals and their compounds--Determination of total rare earth contents--Rare earth oxalate gravimetric method | |
77.120.70 | H14 | GB/T 14635.2-1993 | 稀土金属及其化合物化学分析方法 EDTA滴定法测定单一稀土金属及其化合物中稀土总量 | Rare earth metals and their compounds--Determination of total rare earth contents--EDTA volumetric method | |
77.120.70 | H14 | GB/T 14635.3-1993 | 稀土金属及其化合物化学分析方法 EDTA滴定法测定重稀土金属及其化合物中稀土总量 | Heavy rare-earth metals and their compounds--Determination of total rare earth contents--EDTA volumetric method | |
77.160 | H72 | GB/T 14667.1-1993 | 粉末冶金铁基结构材料 第一部分 烧结铁、烧结碳钢、烧结铜钢、烧结铜钼钢 | Powder metallurgy iron base structural materials--Part 1 Sintering iron, sintering carbon-steel, sintering copper-steel, sintering copper-modenim-steel | |
77.120.70 | H63 | GB/T 14841-1993 | 钽及钽合金棒材 | Tantalum and tantalum alloy rods and bars | NEQ ASTM B 365-86 |
77.120.70 | H63 | GB/T 14842-1993 | 铌棒材 | Niobium rods and bars | NEQ ASTM B 392-84 |
77.120.70 | H63 | GB/T 14843-1993 | 铌酸锂单晶 | Lithium niobate single crystals | NEQ TOSHBA公司等标准 |
77.120.50 | H64 | GB/T 14845-1993 | 板式换热器用钛板 | Titanium sheet for plate heat exchangers | NEQ ASTM B265 I级钛板 |
77.120.10 | H61 | GB/T 14846-1993 | 铝及铝合金挤压型材尺寸偏差 | Wrought aluminium and aluminium alloy extruded profiles--Tolerances on dimensions and shape | NEQ JIS H4100 |
77.120.30 | H62 | GB/T 14953-1994 | 纯铜线 | Copper wires | |
77.120.30 | H62 | GB/T 14954-1994 | 黄铜线 | Brass wires | |
77.120.30 | H62 | GB/T 14955-1994 | 青铜线 | Bronze wires | |
77.120.30 | H62 | GB/T 14956-1994 | 专用铜及铜合金线 | Special copper and copper alloy wires | |
77.140.60 | H49 | GB/T 14957-1994 | 熔化焊用钢丝 | Steel wires for melt welding | |
77.140.60 | H49 | GB/T 14958-1994 | 气体保护焊用钢丝 | Steel wires for gas shielded welding | |
77.140.50 | H46 | GB/T 14977-1994 | 热轧钢板表面质量的一般要求 | General requirement of surface finish for hot rolled steel plates | |
77.140.60 | H46 | GB/T 14978-1994 | 连续热浸镀铝锌硅合金镀层钢带和钢板 | Continual hot-dip aluminium zinc silicon alloy coated steel strips and sheets | |
77.040.30 | H24 | GB/T 14979-1994 | 钢的共晶碳化物不均遠x评定法 | Eutectic carbide of steel--Micrographic method using standard diagrams | |
77.140.60 | H44 | GB/T 14981-1994 | 热轧盘条尺寸、外形、重量及允许偏差 | Dimenisions shape weight and tolerances for hot-rolled wire rods | |
77.100 | H42 | GB/T 14984-1994 | 铁合金术语 | Ferroalloys--Vocabulary | NEQ ISO 8594-90 |
77.010;77. | H58 | GB/T 14985-1994 | 膨胀合金的尺寸、外形、表面质量、试验方法和检验规则的一般规定 | ||
77.140.40 | H58 | GB/T 14986-1994 | 耐蚀软磁合金技术条件 | ||
77.140.40 | H58 | GB/T 14987-1994 | 高硬度高电阻高磁导合金 | High permability alloys with high hardness and high electrical resistance | |
77.140.40 | H58 | GB/T 14988-1994 | 磁滞合金冷轧带 | Cold-rolled strips for hysteresis alloys | |
77.140.40 | H58 | GB/T 14989-1994 | 铁钴钒永磁合金 | Iron-cobalt-vanadium permanent-magnet alloys | |
77.140.40 | H58 | GB/T 14990-1994 | 铁钴钼磁滞合金热轧(或锻)棒材 | Hot rolled (or forged) bars for iron-cobalt-molybdenum hysteresis alloys | |
77.140.40 | H58 | GB/T 14991-1994 | 变形永磁钢 | Deformable permanent-magnet steels | |
77.120 | H58 | GB/T 14992-1994 | 高温合金牌号 | Types of heat-resisting superalloys | |
77.140.60 | H58 | GB/T 14993-1994 | 转动部件用高温合金热轧棒材 | Hot-rolled heat-resisting superalloy bars for rotating parts | |
77.140.60 | H58 | GB/T 14994-1994 | 高温合金冷拉棒材 | Cold brawn heat-resisting superalloy bars | |
77.140.50 | H58 | GB/T 14995-1994 | 高温合金热轧钢板 | Hot-rolled heat-resisting superalloy plates | |
77.140.50 | H58 | GB/T 14996-1994 | 高温合金冷轧薄板 | Cold-Rolled heat-Resisting superalloy sheets | |
77.120 | H58 | GB/T 14997-1994 | 高温合金锻制圆饼 | Forged heat-resisting superalloy disks | |
77.120 | H58 | GB/T 14998-1994 | 高温合金环件毛坯 | Heat-resisting superalloy blanks for forged rings | |
ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) | 国際整合 |
77.140.40 | H58 | GB/T 15001-1994 | 软磁合金尺寸、外形、表面质量、试验方法和检验规则的一般规定 | ||
77.140.40 | H58 | GB/T 15002-1994 | 高饱和磁感应强度软磁合金技术条件 | High saturation intensity of magnetization soft magnetic alloys technical reguirements | |
77.140.40 | H58 | GB/T 15003-1994 | 恒磁导率合金技术条件 | Permanent permeability alloys technical regnirements | |
77.140.40 | H58 | GB/T 15004-1994 | 铁铝软磁合金技术条件 | Iron-aluminium soft magnetic alloys technical reguiremants | |
77.140.40 | H58 | GB/T 15005-1994 | 磁温度补偿合金技术条件 | Magnetic compensate allogs depending on temperature variation technical reguirements | |
77.120 | H58 | GB/T 15006-1994 | 弹性合金的尺寸、外形、表面质量、试验方法和检验规则的一般规定 | ||
77.120 | H59 | GB/T 15007-1994 | 耐蚀合金牌号 | ||
77.120 | H59 | GB/T 15008-1994 | 耐蚀合金棒 | ||
77.120 | H59 | GB/T 15009-1994 | 耐蚀合金热轧板 | ||
77.120 | H59 | GB/T 15010-1994 | 耐蚀合金冷轧薄板 | ||
77.120 | H59 | GB/T 15011-1994 | 耐蚀合金冷轧(拔)无缝管 | ||
77.120 | H59 | GB/T 15012-1994 | 耐蚀合金冷轧带 | ||
77.120 | H59 | GB/T 15013-1994 | 精密合金用磁学特性和磁学量术语 | Magnetic characters and magnetic values terms definitions for procision allogs | |
77.120 | H59 | GB/T 15014-1994 | 弹性合金领域内的物理特性和物理量术语与定义 | Phgsical characters and physical values terms definitions for elastical anogs | |
77.120 | H59 | GB/T 15015-1994 | 膨胀合金领域内的物理特性和物理量术语与定义 | Phgsical characters and physical valnes terms definitions for expansion ahogs | |
77.120 | H59 | GB/T 15016-1994 | 热双金属领域内的物理特性和物理量术语与定义 | Physical characters and phgsical values terms definitions for thermostatic bimetals | |
77.120 | H59 | GB/T 15017-1994 | 电阻合金领域内的物理特性和物理量术语与定义 | Phgsical characters and physical values terms delintious for electric resistance allogs | |
77.120 | H58 | GB/T 15018-1994 | 精密合金牌号 | ||
77.010 | H40 | GB/T 15019-1994 | 快淬金属的分类和牌号 | ||
77.140.80 | J32 | GB/T 15055-1994 | 冲压件未注公差尺寸极限偏差 | Permissible stamping varitions in dimensions without tolerance indication | |
77.140.80 | J31 | GB/T 15056-1994 | 铸造表面粗糙度 评定方法 | Evaluation method on cast surface roughness | |
77.120 | H58 | GB/T 15062-1994 | 一般用途高温合金管 | Heat--resisting superalloy tube for general application | |
77.120.70 | H65 | GB/T 15071-1994 | 金属镝 | Dysprosium metal | |
77.120.70 | H15 | GB/T 15072.1-1994 | 贵金属及其合金化学分析方法 金、钯合金中金量的测定 | Gold, Palladium alloys--Determination of gold content | |
77.120.70 | H15 | GB/T 15072.2-1994 | 贵金属及其合金化学分析方法 银合金中银量的测定 | Silver alloys--Determination of silver content | |
77.120.70 | H15 | GB/T 15072.3-1994 | 贵金属及其合金化学分析方法 金、铂、钯合金中铂量的测定 | Gold, platinum and palladium alloys--Determination of platinum content | |
77.120.70 | H15 | GB/T 15072.4-1994 | 贵金属及其合金化学分析方法 钯、银合金中钯量的测定 | Palladium, silver alloys--Determination of palladium content | |
77.120.70 | H15 | GB/T 15072.5-1994 | 贵金属及其合金化学分析方法 金、钯合金中银量的测定 | Gold, Palladium alloys--Determination of silver content | |
77.120.70 | H15 | GB/T 15072.6-1994 | 贵金属及其合金化学分析方法 铂、钯合金中铱量的测定 | Platinum, palladium alloys--Determination of iridium content | |
77.120.70 | H15 | GB/T 15072.7-1994 | 贵金属及其合金化学分析方法 金合金中铬量的测定 | Gold alloys--Determination of chromium content | |
77.120.70 | H15 | GB/T 15072.8-1994 | 贵金属及其合金化学分析方法 金、钯、银合金中铜量的测定 | Gold,palladium and silver alloys--Determination of copper content | |
77.120.70 | H15 | GB/T 15072.9-1994 | 贵金属及其合金化学分析方法 金合金中铟量的测定 | Gold alloys--Determination of indium content | |
77.120.70 | H15 | GB/T 15072.10-1994 | 贵金属及其合金化学分析方法 金合金中镍量的测定 | Gold alloys--Determination of nickel content | |
77.120.70 | H15 | GB/T 15072.11-1994 | 贵金属及其合金化学分析方法 金合金中钆量的测定 | Gold alloys--Determination of gadolinium content | |
77.120.70 | H15 | GB/T 15072.12-1994 | 贵金属及其合金化学分析方法 银合金中钒量的测定 | Silver alloys--Determination of vanadium content | |
77.120.70 | H15 | GB/T 15072.13-1994 | 贵金属及其合金化学分析方法 银合金中铈量的测定 | Silver alloy--Determination of cerium content | |
77.120.70 | H15 | GB/T 15072.14-1994 | 贵金属及其合金化学分析方法 银合金中铝量的测定 | Silver alloys--Determination of aluminium content | |
77.120.70 | H15 | GB/T 15072.15-1994 | 贵金属及其合金化学分析方法 金、银、钯合金中镍、锌、锰量的测定 | Gold, silver and palladium alloys--Determination of nickel, zinc and manganese contents | |
77.120.70 | H15 | GB/T 15072.16-1994 | 贵金属及其合金化学分析方法 金合金中铜、锰量的测定 | Gold alloys--Determination of copper and manganese contents | |
77.120.70 | H15 | GB/T 15072.17-1994 | 贵金属及其合金化学分析方法 铂合金中钨量的测定 | Platinum alloys--Determination of tungsten content | |
77.120.70 | H15 | GB/T 15072.18-1994 | 贵金属及其合金化学分析方法 金合金中铁量的测定 | Gold alloys--Determination of iron content | |
77.120.70 | H15 | GB/T 15072.19-1994 | 贵金属及其合金化学分析方法 金合金中铬量的测定 | Gold alloys--Determination of chromium content | |
77.120.70 | H15 | GB/T 15072.20-1994 | 贵金属及其合金化学分析方法 金合金中锆量的测定 | Gold alloys--Determination of zirconium content | |
77.120.50 | H64 | GB/T 15073-1994 | 铸造钛及钛合金牌号和化学成分 | Designation and chemical composition of cast titanium and titanium alloys | NEQ ASTM B367-87 |
77.120.70 | H14 | GB/T 15076.1-1994 | 钽铌化学分析方法 铌中钽量的测定 | Methods for chemical analysis of tantalum and niobium--Determihation of tantalum content in niobium | |
77.120.70 | H14 | GB/T 15076.2-1994 | 钽铌化学分析方法 钽中铌量的测定 | Methods for chemical analysis of tantalum and niobium--Determination of niobium content in tantalum | |
77.120.70 | H14 | GB/T 15076.3-1994 | 钽铌化学分析方法 铜量的测定 | Methods for chemical analysis of tantalum and niobium--Determination of copper content | |
77.120.70 | H14 | GB/T 15076.4-1994 | 钽铌化学分析方法 铁量的测定 | Methods for chemical analysis of tantalum and niobium--Determination of iron content | |
77.120.70 | H14 | GB/T 15076.5-1994 | 钽铌化学分析方法 钼量和钨量的测定 | Methods for chemical analysis of tantalum and niobium--Determination of molybdenum and tungsten contents | |
77.120.70 | H14 | GB/T 15076.6-1994 | 钽铌化学分析方法 钽中硅量的测定 | Methods for chemical analysis of tantalum and niobium--Determination of silicon content in tantalum | |
77.120.70 | H14 | GB/T 15076.7-1994 | 钽铌化学分析方法 铌中磷量的测定 | Methods for chemical analysis of tantalum and niobium--Determination of phospherus content in niobium | |
77.120.70 | H14 | GB/T 15076.8-1994 | 钽铌化学分析方法 铌中硫量的测定 | Methods for chemical analysis of tantalum and niobium--Determination of sulphur content in niobium | |
77.120.70 | H14 | GB/T 15076.9-1994 | 钽铌化学分析方法 钽中铁、铬、镍、锰、钛、铝、铜和锆量的测定 | Methods for chemical analysis of tantalum and niobium--Determination of iron, chromium, nickel, manganese, titanium, aluminum, copper and zirconium contents in tantalum | |
77.120.70 | H14 | GB/T 15076.10-1994 | 钽铌化学分析方法 铌中铁、镍、铬、钛、锆、铝和锰量的测定 | Methods for chemical analysis of tantalum and niobium--Determination of iron, nickel, chromium, titanium, zirconium, aluminum and manganese contents in niobium | |
77.120.70 | H14 | GB/T 15076.11-1994 | 钽铌化学分析方法 铌中砷、锑、铅、锡和铋量的测定 | Methods for chemical analysis of tantalum and niobium--Determination of arsenic antimony, lead, tinand bismuth contents in niobium | |
77.120.70 | H14 | GB/T 15076.12-1994 | 钽铌化学分析方法 碳量的测定 | Methods for chemical analysis of tantalum and niobium--Determination of carbon content | |
77.120.70 | H14 | GB/T 15076.13-1994 | 钽铌化学分析方法 钽中氮量的测定 | Methods for chemical analysis of tantalum and niobium--Determination of nitrogen content in tantalum | |
77.120.70 | H14 | GB/T 15076.14-1994 | 钽铌化学分析方法 氧量的测定 | Methods for chemical analysis of tantalum and niobium--Determination of oxygen content | |
77.120.70 | H14 | GB/T 15076.15-1994 | 钽铌化学分析方法 氢量的测定 | Methods for chemical analysis of tantalum and niobium--Determination of hydrogen content | |
77.040.30 | H21 | GB/T 15077-1994 | 贵金属及其合金材料几何尺寸测量方法 | Geometric size measuring methods of precious metals and their alloy materials | NEQ ISO 1463-82 |
77.040 | H21 | GB/T 15078-1994 | 贵金属电触点材料接触电阻的测量方法 | Measuring method for contact resistance of precious metal electrical contact materials | NEQ ASTM F359-90 |
77.120.10 | J31 | GB/T 15114-1994 | 铝合金压铸件 | Aluminium alloy die-castings | |
77.120.10 | J31 | GB/T 15115-1994 | 压铸铝合金 | Die casting aluminium alloys | |
77.120.30 | J31 | GB/T 15116-1994 | 压铸铜合金 | Die casting copper alloys | |
77.120.30 | J31 | GB/T 15117-1994 | 铜合金压铸件 | Copper alloy die castings | |
77.120.70 | H68 | GB/T 15159-1994 | 贵金属及其合金复合带材 | Composite material strips of precious metals and their alloys | |
77.040.10 | H22 | GB/T 15248-1994 | 金属材料轴向等幅低循环疲劳试验方法 | The test method for axial loading constant-amplitude low-cycle fatigue of metallic materials | EQV ASTM E606-91 |
77.120.70 | H15 | GB/T 15249.1-1994 | 合质金化学分析方法 火试金重量法测定金量 | Crude Gold--Determination of gold content--Fire assay gravimetric method | |
77.120.70 | H15 | GB/T 15249.2-1994 | 合质金化学分析方法 EDTA滴定法测定银量 | Crude Gold--Determination of silver content--EDTA titrimetric method | |
77.120.70 | H15 | GB/T 15249.3-1994 | 合质金化学分析方法 碘量法测定铜量 | Crude Gold--Determination of copper content--Iodometric method | |
77.120.70 | H15 | GB/T 15249.4-1994 | 合质金化学分析方法 EDTA滴定法测定铅量 | Crude Gold--Determination of lead content--EDTA titrimetric method | |
77.120.70 | H15 | GB/T 15249.5-1994 | 合质金化学分析方法 冷原子吸收光谱法测定汞量 | Crude Gold--Determination of mercury content--Cold atomic absorption spectrometric method | |
77.040.30 | H25 | GB/T 15260-1994 | 镍基合金晶间腐蚀试验方法 | Nickel-based alloys--Determination of resistance to intergranular corrosion | EQV ISO 9400-90 |
77.140.60 | H46 | GB/T 15391-1994 | 宽度小于600mm冷轧钢带的尺寸、外形及允许偏差 | Dimensions,shape and tolerances for cold-rolled steel strips with a width lessthan 600mm | NEQ JIS G3141 |
77.140.60 | H46 | GB/T 15392-1994 | 宽度小于700mm连续热镀锌钢带 | Continual hot-dip zinc-coated steel strips with a width less than 700mm | NEQ ISO 3575-76 |
77.140.01? | H40 | GB/T 15574-1995 | 钢产品分类 | Steel products classification and definitions | EQV ISO 6929-87 |
77.120.70 | H42 | GB/T 15710-1995 | 硅钡合金 | Silicon barium alloy | |
77.040.30 | H24 | GB/T 15711-1995 | 钢材塔形发纹酸浸检验方法 | Steel products--Method for etch test of tower sample | NEQ ISO 3763-1976 |
77.080.20 | H40 | GB/T 15712-1995 | 非调质机械结构钢 | Ferritic--Pearlitic engineering steels for precipitation hardening from hot--Working temperature | NEQ ISO 11692-1994 |
77.140.90 | H62 | GB/T 15714-1995 | 焊接管用H65黄铜带 | Brass (H65) strip for welded tube | NEQ JIS H3100-1986 |
77.040.20 | N64 | GB/T 15725.1-1995 | 实验室玻璃仪器 细口烧瓶 | Laboratory glassware-Flask(narrow neck) | EQV ISO 1773-1976 |
77.060 | U05 | GB/T 15748-1995 | 船用金属材料电偶腐蚀试验方法 | The method of galvanic corrosion test for metallic ship materials | NEQ ASTM G71-81 |
77.040.30 | H24 | GB/T 15749-1995 | 定量金相手工测定方法 | Manual measuring method in quantitative metallography | |
77.040.10 | J46 | GB/T 15824-1995 | 热作模具钢热疲劳试验方法 | Thermal fatigue testing method for hot die steel | |
77.040.10 | J32 | GB/T 15825.1-1995 | 金属薄板成形性能与试验方法 成形性能和指标 | Sheet metal formability and test methods--Formability and indexes | NEQ SAE J 77 |
77.040.10 | J32 | GB/T 15825.2-1995 | 金属薄板成形性能与试验方法 通用试验规程 | Sheet metal formability and test methods--General test rules | |
77.040.10 | J32 | GB/T 15825.3-1995 | 金属薄板成形性能与试验方法 拉深与拉深载荷试验 | Sheet metal formability and test methods--Drawing and drawing load test | |
77.040.10 | J32 | GB/T 15825.4-1995 | 金属薄板成形性能和试验方法 扩孔试验 | Sheet metal formability and test methods--Hole expanding test | |
77.040.10 | J32 | GB/T 15825.5-1995 | 金属薄板成形性能与试验方法 弯曲试验 | Sheet metal formability and test methods--Bending test | |
77.040.10 | J32 | GB/T 15825.6-1995 | 金属薄板成形性能与试验方法 锥杯试验 | Sheet metal formability and test methods--Conical cup test | |
77.040.10 | J32 | GB/T 15825.7-1995 | 金属薄板成形性能与试验方法 凸耳试验 | Sheet metal formability and test methods--Earing test | |
77.040.10 | J32 | GB/T 15825.8-1995 | 金属薄板成形性能与试验方法 成形极限图(FLD)试验 | Sheet metal formability and test methods--Forming limit diagram (FLD) test | |
77.120.70 | H14 | GB/T 15917.1-1995 | 金属镝及氧化镝化学分析方法 发射光谱法测定氧化钆、氧化铖、氧化钬、氧化铒和氧化钇量 | Dysprosium and dysprosium oxide--Determination of gadolinium oxide,terbium oxide,holmium oxide,erbium oxide and yttrium oxide contents--Emission spectrographic method | |
77.120.70 | H14 | GB/T 15917.2-1995 | 金属镝及氧化镝化学分析方法 电感耦合等离子发射光谱法 测定金属镝中铜、钼、镍、和钛量 | Dysprosium and dysprosium oxide--Determination of copper, molybdenum, nickel and titanium contents--Inductively coupled plasma atomic emission spectrographic method | |
77.120.70 | H14 | GB/T 15917.3-1995 | 金属镝及氧化镝化学分析方法 对氯苯基荧光酮- 溴化十六烷基 三甲基胺分光光度法测定钽量 | Dysprosium and dysprosium oxide--Determination of tantalum content--Para-chlloride--phenylfluorone-cetyl trimethyl ammonium bromide-ethanol spectrophotometric method | |
77.120.70 | H14 | GB/T 15917.4-1995 | 金属镝及氧化镝化学分析方法 脉冲- 红外吸收法测定金属镝中氧量 | Dysprosium and dysprosium oxide--Determination of oxygen content--Impulse-infrared absorption method | |
77.160 | A59 | GB/T 15951-1995 | 骨振器测量用力耦合器 | Mechanical coupler for measurements on bone vibrators | IDT IEC 60373-90 |
77.040.10 | H25 | GB/T 15970.1-1995 | 金属和合金的腐蚀 应力腐蚀试验 第1部分: 试验方法总则 | Corrosion of metals and alloys--Stress corrosion testing--Part 1: General guidance on testing procedures | IDT ISO 7539/1-1987 |
77.060 | H25 | GB/T 15970.2-2000 | 金属和合金的腐蚀 应力腐蚀试验 第2部分: 弯梁试样的制备和应用 | Corrosion of metals and alloys-Stress corrosion testing--Part 2: Preparation and use of bent-beam specimens | IDT ISO 7539-2:1989 |
77.040.10 | H25 | GB/T 15970.3-1995 | 金属和合金的腐蚀 应力腐蚀试验 第3部分: U型弯曲试样的制备和应用 | Corrosion of metals and alloys--Stress corrosion testing--Part 3: Preparation and use of U--bend specimens | IDT ISO 7539/3-89 |
77.060 | H25 | GB/T 15970.4-2000 | 金属和合金的腐蚀 应力腐蚀试验 第4部分: 单轴加载拉伸试样的制备和应用 | Corrosion of metals and alloys-Stress corrosion testing--Part 4: Preparation and use of uniaxially loaded tension specimens | IDT ISO 7539-4:1989 |
77.060 | H25 | GB/T 15970.5-1998 | 金属和合金的腐蚀 应力腐蚀试验 第5部分: C型环试样的制备和应用 | Corrosion of metals and alloy--Stress corrosion testing--Part 5: Preparation and use of C-ring specimens | IDT ISO 7539-5:1989 |
77.060 | H25 | GB/T 15970.6-1998 | 金属和合金的腐蚀 应力腐蚀试验 第6部分: 预裂纹试样的制备和应用 | Corrosion of metals and alloys--Stress corrosion testing--Part 6: Preparation and use of pre-cracked specimens | IDT ISO 7539-6:1989 |
77.060 | H25 | GB/T 15970.7-2000 | 金属和合金的腐蚀 应力腐蚀试验 第7部分: 慢应变速率试验 | Corrosion of metals and alloys--Stress corrosion testing Part 7: Slow strain rate testing | IDT ISO 7539-7:1989 |
ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) | 国際整合 |
77.140.80 | J31 | GB/T 16253-1996 | 承压钢铸件 | Steel castings for pressure purposes | EQV ISO 4991-1994 |
77.140.60 | H46 | GB/T 16270-1996 | 高强度结构钢热处理和控轧钢板、钢带 | High-strength structural steel plates and strips: products supplied in the heat-treated or controlled rolled condition | NEQ ISO 4950-3-1981 |
77.150.10 | H61 | GB/T 16474-1996 | 变形铝及铝合金牌号表示方法 | Wrought aluminium and aluminium alloy--Designation system | EQV ANSI H 35.1-1993 |
77.150.10 | H61 | GB/T 16475-1996 | 变形铝及铝合金状态代号 | Temper designation system for wrought aluminium and aluminium alloy | NEQ ANSI H 35.1-1993 |
77.120.99 | H65 | GB/T 16476-1996 | 金属钪 | Scandium metal | |
77.100 | H14 | GB/T 16477.1-1996 | 稀土硅铁合金及镁硅铁合金化学分析方法 稀土总量测定 | Methods for chemical analysis of rare earth ferrosilicon alloy and rare earth ferrosilicon magnesium alloy--Determination of total rare earth content | |
77.100 | H14 | GB/T 16477.2-1996 | 稀土硅铁合金及镁硅铁合金化学分析方法 钙、镁、锰量的测定 | Methods for chemical analysis of rare earth ferrosilicon alloy and rare earth ferrosilicon magnesium alloy--Determination of calcium,magnesium,and manganese contents | |
77.100 | H14 | GB/T 16477.3-1996 | 稀土硅铁合金及镁硅铁合金化学分析方法 氧化镁量的测定 | Methods for chemical analysis of rare earth ferrosilicon alloy and rare earth ferrosilicon magnesium alloy--Determination of magnesia content | |
77.100 | H14 | GB/T 16477.4-1996 | 稀土硅铁合金及镁硅铁合金化学分析方法 硅量测定 | Methods for chemical analysis of rare earth ferrosilicon alloy and rare earth ferrosilicon magnesium alloy--Determination of silica content | |
77.100 | H14 | GB/T 16477.5-1996 | 稀土硅铁合金及镁硅铁合金化学分析方法 钛量的测定 | Methods for chemical analysis of rare earth ferrosilicon alloy and rare earth ferrosilicon magnesium alloy--Determination of titanium content | |
77.120 | H14 | GB/T 16480.1-1996 | 金属钇及氧化钇化学分析方法 氧化镧、氧化铈、氧化镨、氧化钕、氧化钐、氧化铕、氧化钆、氧化铽、氧化镝、氧化钬、氧化铒、氧化铥、氧化镱和氧化镥量的测定 | Method for chemical analysis of yttrium and yttrium oxide--Determination of lanthanum oxide, cerium oxide, praseodymium oxide,neodymium oxide, samarium oxide, europium oxide, gadolinium oxide, terbium oxide, dysprosium oxide, holmium oxide,erbium oxi | |
77.120 | H14 | GB/T 16480.2-1996 | 金属钇及氧化钇化学分析方法 钽、钛、铜和镍量的测定 | Methods for chemical analysis of yttrium and yttrium oxide--Determination of tantaium, titanium, copper and nickel content | |
77.120 | H14 | GB/T 16480.4-1996 | 金属钇及氧化钇化学分析方法 硫量的测定 | Methods for chemical analysis of yttrium and yttriumoxide--Determination of sulphur content | |
77.120 | H14 | GB/T 16480.5-1996 | 金属钇及氧化钇化学分析方法 金属钇中氮量的测定 | Methods for chemical analysis of yttrium and yterium oxide--Determination of nitrogen content | |
77.040.01 | H14 | GB/T 16481-1996 | 稀土元素微波等离子体炬发射光谱(MPT-AES)标准谱表 | Standard spectrum tables of microwave plasma torch-atomic emitting spectrum of rare earth | |
77.150.10 | H61 | GB/T 16501-1996 | 铝及铝合金热轧带材 | Hot rolled strip of aluminium and aluminium alloy | NEQ JIS H4000 |
77.060 | H25 | GB/T 16545-1996 | 金属和合金的腐蚀 腐蚀试样上腐蚀产物的清除 | Corrosion of metals and alloys--Removal of corrosion products from corrosion test specimens | IDT ISO 8407-1991 |
77.040.30 | H10 | GB/T 16597-1996 | 冶金产品分析方法 X射线荧光光谱法通则 | Analytical methods of metallurgical products--General rule for X-ray fluorescence spectrometric methods | |
77.150.50 | H64 | GB/T 16598-1996 | 钛及钛合金饼和环 | Titanium and titanium alloy disc and ring | |
77.120.99 | H14 | GB/T 16599-1996 | 钼的发射光谱分析方法 | Methods for emission spectrum analysis of molybdenum | |
77.120.99 | H14 | GB/T 16600-1996 | 钨的发射光谱分析方法 | Methods for emission spectrum analysis of tungsten | |
77.150.60 | J31 | GB/T 16746-1997 | 锌合金铸件 | Zinc alloy castings | |
77.140.50 | H44 | GB/T 16761-1997 | 锻制扁钢尺寸、外形、重量及允许偏差 | Dimensions,shape,weight and tolerances for forged flats | |
77.140.65 | H49 | GB/T 16762-1997 | 一般用途钢绳吊索特性和技术条件 | Wire rope slings for general purposes--Characteristics and specifications | EQV ISO 7531:1987 |
77.120 | H61 | GB/T 16865-1997 | 变形铝、镁及其合金加工制品拉伸试验用试样 | Test pieces for tensile test for wrought aluminum and magnesium and tleir alloy products | |
77.120.30 | H62 | GB/T 16866-1997 | 一般用途的加工铜及铜合金无缝圆形管材外形尺寸及允许偏差 | Wrought copper and copper alloy seamless round tubes for general purposes-Dimensions and tolerances | |
ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) | 国際整合 |
77.120.99 | H54 | GB 17100-1997 | 外科植入物用铸造钴铬钼合金 | Casting Co-Cr-Mo alloy for surgical implants | NEQ ISO 5832-4:1996 |
77.140.60 | H49 | GB/T 17101-1997 | 桥梁缆索用热镀锌钢丝 | Hot-dip galvanized steel wires for bridge cables | NEQ NF A35-035:1993 |
77.140.50 | H46 | GB/T 17102-1997 | 不锈复合钢冷轧薄钢板和钢带 | Cold rolled stainless steel clad sheets and strips | |
77.040.30 | H21 | GB/T 17103-1997 | 金属材料定量极图的测定 | Metal material--Quantitative pole figure preparing method | NEQ ASTM E81:1990 |
77.040.10 | H23 | GB/T 17104-1997 | 金属管 管环拉伸试验方法 | Metallic materials--Tube--Ring tensile test | EQV ISO 8496:1986 |
77.140 | H40 | GB/T 17107-1997 | 锻件用结构钢牌号和力学性能 | Structural steel grades and mechanical property for forgings | |
77.150.99 | H68 | GB/T 17168-1997 | 齿科铸造贵金属合金 | Dental casting precious metal alloys | NEQ ISO 1562:1993(E) |
77.120.10 | H61 | GB/T 17171-1997 | 水性铝膏 | Aquosity aluminium paste | |
77.040 | N72 | GB/T 17200-1997 | 橡胶塑料拉力、压力、弯曲试验机 技术要求 | Requirements for tensile,flexural and compression testing machines for rubbers and plastics | IDT ISO 5893:1993 |
77.120.99 | H15 | GB/T 17373-1998 | 合质金化学分析取样方法 | Sampling methods for chemical analysis of crude gold | |
77.040.10 | H22 | GB/T 17394-1998 | 金属里氏硬度试验方法 | Metallic materials--Leeb hardness test | |
77.140.75 | H48 | GB/T 17395-1998 | 无缝钢管尺寸、外形、重量及允许偏差 | Dimensions、shapes、masses and tolerances of seamless steel tubes | NEQ ISO 1127:1992 |
77.140.75 | H48 | GB/T 17396-1998 | 液压支柱用热轧无缝钢管 | Seamless hot--Rolled steel tubes for hydraulic pillar service | NEQ DIN 1629-1984 |
77.120.10 | H61 | GB/T 17432-1998 | 变形铝及铝合金化学成分分析取样方法 | Methods of sampling for analysing the chemical composition of wrought aluminum and aluminum alloy | NEQ ASTM E55-91 |
77.040 | H10 | GB/T 17433-1998 | 冶金产品化学分析基础术语 | Foundation terms for chemical analysis of metallurgical products | |
77.140.80 | J31 | GB/T 17445-1998 | 铸造磨球 | Cast grinding balls | |
77.120 | H68 | GB/T 17472-1998 | 贵金属浆料规范 | Specification for pastes of precious metals | |
77.040.01 | H15 | GB/T 17473.1-1998 | 厚膜微电子技术用贵金属浆料测试方法 固体含量测定 | Test methods of precious metal pastes used for thick film microelectronics--Determination of solids content | |
77.040.01 | H21 | GB/T 17473.2-1998 | 厚膜微电子技术用贵金属浆料测试方法 细度测定 | Test methods of precious metal pastes used for thick film microelectronics--Determination of fineness | |
77.040.01 | H21 | GB/T 17473.3-1998 | 厚膜微电子技术用贵金属浆料测试方法 方阻测定 | Test methods of precious metal pastes used for thick film microelectronics--Detemination of sheet resistance | |
77.040.01 | H22 | GB/T 17473.4-1998 | 厚膜微电子技术用贵金属浆料测试方法 附着力测定 | Test methods of precious metal pastes used for thick film microelectronics--Determination of adhesion | |
77.040.01 | H22 | GB/T 17473.5-1998 | 厚膜微电子技术用贵金属浆料测试方法 粘度测定 | Test methods of precious metal pastes used for thick film microelectronics--Determination of viscosity | |
77.040.01 | H23 | GB/T 17473.6-1998 | 厚膜微电子技术用贵金属浆料测试方法 分辨率测定 | Test methods of precious metal pastes used for thick-film microelectronics--Determination of resolution | |
77.040.01 | H23 | GB/T 17473.7-1998 | 厚膜微电子技术用贵金属浆料测试方法 可焊性、耐焊性试验 | Test methods of precious metal pastes used for thick-film microelectronics--Test of solderability and solderleaching resistance | |
77.080.20 | H40 | GB/T 17505-1998 | 钢及钢产品交货一般技术要求 | Steel and steel products General technical delivery requirements | EQV ISO 404-1992(E) |
77.040.10 | H22 | GB/T 17600.1-1998 | 钢的伸长率换算 第1部分: 碳素钢和低合金钢 | Steel--Conversion of elongation values--Part 1: Carbon and low alloy steels | EQV ISO 2566/1-1984 |
77.040.10 | H22 | GB/T 17600.2-1998 | 钢的伸长率换算 第2部分: 奥氏体钢 | Steel--Conversion of elongation values--Part 2: Austenitic steels | EQV ISO 2566/2-1984 |
77.080.01 | H40 | GB/T 17616-1998 | 钢铁及合金牌号统一数字代号体系 | Unified numbering system for designations of iron,steel and alloy | |
77.150 | H68 | GB/T 17684-1999 | 贵金属及其合金术语 | The terminology for precious metals and their alloys | |
77.120.20 | H61 | GB/T 17731-1999 | 镁合金牺牲阳极 | Magnesium alloy sacrificial anode | NEQ JIS H6125:1961(1971) |
77.120 | H63 | GB/T 17792-1999 | 钼及钼合金棒 | Specification for molybdenum and molybdenum alloy bar | NEQ ASTM B387:1999 |
77.120.30 | H62 | GB/T 17793-1999 | 一般用途的加工铜及铜合金板带材 外形尺寸及允许偏差 | Wrought copper and copper alloy plate,sheet and strip for general purposes--Dimensions and tolerances | |
77.120.99 | H65 | GB/T 17803-1999 | 稀土产品牌号表示方法 | Designation system for rare earth products | |
77.060 | H25 | GB/T 17897-1999 | 不锈钢三氯化铁点腐蚀试验方法 | Test of pitting corrosion resistance of stainless steels in the ferric chloride solution | NEQ JIS G0578:1981 |
77.060 | H25 | GB/T 17898-1999 | 不锈钢在沸腾氯化镁溶液中应力腐蚀试验方法 | Test methed for stress corrosion-cracking resistance of stainless steels in a boiling magnesium chloride solution | NEQ JIS G0576:1975 |
77.060 | H25 | GB/T 17899-1999 | 不锈钢点蚀电位测量方法 | Method of pitting potential measurement for stainless steels | EQV JIS G0577:1981 |
77.040.20 | H26 | GB/T 17990-1999 | 圆钢点式(线圈)涡流探伤检验方法 | Round steel rods--The eddy current testing method with probe coil | |
ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) | 国際整合 |
77.040.01 | H24 | GB/T 18032-2000 | 砷化镓单晶AB微缺陷检验方法 | The inspecting method of AB microscopic defect in gallium arsenide single crystal | |
77.150.30 | H62 | GB/T 18033-2000 | 无缝铜水管和铜气管 | Seamless copper tubes for water and gas | |
77.120.99 | H68 | GB/T 18034-2000 | 微型热电偶用铂铑细偶丝规范 | Specification for the platinum rhodium thermocouple thin wires used in mini-thermocouples | |
77.120 | H68 | GB/T 18035-2000 | 贵金属及其合金牌号表示方法 | Precious metals and its alloys designation system | |
77.040.01 | H21 | GB/T 18036-2000 | 铂铑热电偶细丝的热电动势测量方法 | The test method of thermo-emf for platinum rhodium thermocouple thin wires | |
77.150.99 | H65 | GB/T 18113-2000 | 铬酸镧高温电热元件 | Heating element of lanthanum chromite in high temperature | |
77.120 | H14 | GB/T 18115.1-2000 | 稀土氧化物化学分析方法 电感耦合等离子体发射光谱法测定氧化镧中氧化铈、氧化镨、氧化钕、氧化钐、氧化铕、氧化钆、氧化铽、氧化镝、氧化钬、氧化铒、氧化铥、氧化镱、氧化镥和氧化钇量 | Lanthanum oxide--Determination of cerium oxide,praseodymium oxide, neodymium oxide, samarium oxide, europium oxide, gadolinium oxide, terbium oxide, dysprosium oxide, holmium oxide, erbium oxide, thulium oxide, ytterbium oxide, lutetium oxide and yttrium | |
77.120 | H14 | GB/T 18115.2-2000 | 稀土氧化物化学分析方法 电感耦合等离子体发射光谱法测定氧化铈中氧化镧、氧化镨、氧化钕、氧化钐、氧化铕、氧化钆、氧化铽、氧化镝、氧化钬、氧化铒、氧化铥、氧化镱、氧化镥和氧化钇量 | Cerium oxide--Determination of lanthanum oxide,praseodymium oxide,neodymium oxide,samarium oxide,europium oxide,gadolinium oxide, terbium oxide,dysprosium oxide,holmium oxide,erbium oxide,thulium oxide,ytterbium oxide, lutetium oxide and yttrium oxide co | |
77.120 | H14 | GB/T 18115.3-2000 | 稀土氧化物化学分析方法 电感耦合等离子体发射光谱法测定氧化镨中氧化镧、氧化铈、氧化钕、氧化钐、氧化铕、氧化钆、氧化铽、氧化镝、氧化钬、氧化铒、氧化铥、氧化镱、氧化镥和氧化钇量 | Praseodymium oxide--Determination of lanthanum oxide,cerium oxide,neodymium oxide,samarium oxide,europium oxide,gadolinium oxide,terbium oxide, dysprosium oxide,holmium oxide,erbium oxide,thulium oxide,ytterbium oxide,lutetium oxide and yttrium oxide con | |
77.120 | H14 | GB/T 18115.4-2000 | 稀土氧化物化学分析方法 电感耦合等离子体发射光谱法测定氧化钕中氧化镧、氧化铈、氧化镨、氧化钐、氧化铕、氧化钆、氧化铽、氧化镝、氧化钬、氧化铒、氧化铥、氧化镱、氧化镥和氧化钇量 | Neodynium oxide--Determination of lanthanum oxide,cerium oxide,praseodymium oxide,samarium oxide,europium oxide,gadolinium oxide,terbium oxide,dysprosium oxide,holmium oxide,erbium oxide,thulium oxide,ytterbium oxide,lutetium oxide and yttrium oxide cont | |
77.120 | H14 | GB/T 18115.5-2000 | 稀土氧化物化学分析方法 电感耦合等离子体发射光谱法测定氧化钐中氧化镧、氧化铈、氧化镨、氧化钕、氧化铕、氧化钆、氧化铽、氧化镝、氧化钬、氧化铒、氧化铥、氧化镱、氧化镥和氧化钇量 | Samarium oxide--Determination of lanthanum oxide,cerium oxide,praseodymium oxide,neodymium oxide,europium oxide,gadolinium oxide,terbium oxide,dysprosium oxide,holmium oxide,erbium oxide,thulium oxide,ytterbium oxide,lutetium oxide and yttrium oxide cont | |
77.120 | H14 | GB/T 18115.6-2000 | 稀土氧化物化学分析方法 电感耦合等离子体发射光谱法测定氧化钆中氧化镧、氧化铈、氧化镨、氧化钕、氧化钐、氧化铕、氧化铽、氧化镝、氧化钬、氧化铒、氧化铥、氧化镱、氧化镥和氧化钇量 | Gadolinium--Determination of lanthanum oxide,cerium oxide,praseodymium oxide,neodymium oxide,samarium oxide,europium oxide,terbium oxide,dysprosium oxide,holmium oxide,erbium oxide,thulium oxide,ytterbium oxide,lutetium oxide and yttrium oxide contents-- | |
77.120 | H14 | GB/T 18115.7-2000 | 稀土氧化物化学分析方法 电感耦合等离子体发射光谱法测定氧化铽中氧化镧、氧化铈、氧化镨、氧化钕、氧化钐、氧化铕、氧化钆、氧化镝、氧化钬、氧化铒、氧化铥、氧化镱、氧化镥和氧化钇量 | Terbium oxide--Determination of lanthanum oxide,cerium oxide,praseodymium oxide,neodymium oxide,samarium oxide,europium oxide,gadolinium oxide,dysprosium oxide,holmium oxide,erbium oxide,thulium oxide,ytterbium oxide,lutetium oxide and yttrium oxide cont | |
77.120 | H14 | GB/T 18115.8-2000 | 稀土氧化物化学分析方法 电感耦合等离子体发射光谱法测定氧化镝中氧化镧、氧化铈、氧化镨、氧化钕、氧化钐、氧化铕、氧化钆、氧化铽、氧化钬、氧化铒、氧化铥、氧化镱、氧化镥和氧化钇量 | Dysprosium oxide--Determination of lanthanum oxide,ceriurm oxide,praseodymium oxide,neodymium oxide,samarium oxide,eueropium oxide,gadolinium oxide,terbium oxide,holmium oxide,erbium oxide thulium oxide,ytterbium oxide,luteclum oxide and yttrium oxide co | |
77.120 | H14 | GB/T 18115.9-2000 | 稀土氧化物化学分析方法 电感耦合等离子体发射光谱法测定氧化钬中氧化镧、氧化铈、氧化镨、氧化钕、氧化钐、氧化铕、氧化钆、氧化铽、氧化镝、氧化铒、氧化铥、氧化镱、氧化镥和氧化钇量 | Holmium oxide--Determination of lanthanum oxide,cerium oxide,praseodymium oxide,neodymium oxide,samarium oxide,europium oxide,gadolinium oxide terbium oxide,dysprosium oxide,erbium oxide,thulium oxide,ytterbium oxide,lutetium oxide and yttrium oxide cont | |
77.120 | H14 | GB/T 18115.10-2000 | 稀土氧化物化学分析方法 电感耦合等离子体发射光谱法测定氧化铒中氧化镧、氧化铈、氧化镨、氧化钕、氧化钐、氧化铕、氧化钆、氧化铽、氧化镝、氧化钬、氧化铥、氧化镱、氧化镥和氧化钇量 | Erbium oxide--Determination of lanthanum oxide,cerium oxide,praseodymium oxide,neodymium oxide,samarium oxide,europium oxide,gadolinium oxide,terbium oxide,dysprosium oxide,holmium oxide,thulium oxide,ytterbium oxide,lutetium oxide and yttrium oxide cont | |
77.120 | H14 | GB/T 18116.1-2000 | 氧化钇铕化学分析方法 电感耦合等离子体原子发射光谱法测定氧化钇铕中氧化镧、氧化铈、氧化镨、氧化钕、氧化钐、氧化钆、氧化铽、氧化镝、氧化钬、氧化铒、氧化铥、氧化镱和氧化镥量 | Yttrium-Europium oxide--Determination of lanthanum oxide,cerium oxide,praseodymium oxide,neodymium oxide,samarium oxide,gadolinium oxide,terbium oxide,dysprosium oxide,holmium oxide,erbium oxide,thulium oxide,ytterbium oxide and lutetium oxide contents-- | |
77.120 | H14 | GB/T 18116.2-2000 | 氧化钇铕化学分析方法 电感耦合等离子体原子发射光谱法测定氧化钇铕中氧化铕量 | Yttrium--Europium oxide--Determination of europium oxide content--Inductively coupled plasma atomic emission spectrographic method | |
77.120 | H14 | GB/T 18116.3-2000 | 氧化钇铕化学分析方法 荧光光度法测定氧化钇铕中氧化铕量 | Yttrium--Europium oxide--Determination of europium oxide content--Fluorescent spectrophotometric method | |
77.140.75 | H48 | GB 18248-2000 | 气瓶用无缝钢管 | Seamless steel tubes for gas cylinder | NEQ JIS G 3429:1988 |
77.100 | H42 | GB/T 18249-2000 | 检查铁合金取样和制样偏差的试验方法 | Ferroalloys-Experimental methods for checking the bias of sampling and sample preparation | EQV ISO 7347:1987 |
77.140.01 | H40 | GB/T 18253-2000 | 钢及钢产品 检验文件的类型 | Steel and steel products--Types of inspection documents | EQV ISO 10474:1991 |
77.140.20 | H40 | GB/T 18254-2000 | 高碳铬轴承钢 | High-carbon chromium bearing steel | NEQ ASTM A295:1994 |
77.080.01 | G15 | GB/T 18255-2000 | 焦化粘油类产品馏程的测定 | Coking viscous oil products--Determination of distillation range | |
77.040.20 | H26 | GB/T 18256-2000 | 焊接钢管(埋弧焊除外)--用于确认水压密实性的超声波检测方法 | Welded steel tubes(except submerged arc-welded)--Ultrasonic testing for verification of hydraulic leak-tightness | EQV ISO 10332:1994 |
77.120.70 | H15 | GB/T 18307-2001 | 粗银化学分析方法 | Methods for chemical analysis of crude silver | |
77.160 | H70 | GB/T 18376.1-2001 | 硬质合金牌号 第1部分: 切削工具用硬质合金牌号 | Grades of cemented carbide Part 1: grades of cemented carbide for cutting tools | |
77.160 | H70 | GB/T 18376.2-2001 | 硬质合金牌号 第2部分: 地质、矿山工具用硬质合金牌号 | Grades of cemented carbide Part 2: grades of cemented carbide for geological and mining tools | |
77.160 | H70 | GB/T 18376.3-2001 | 硬质合金牌号 第3部分: 耐磨零件用硬质合金牌号 | Grades of cemented carbide Part 3: grades of cemented carbide for wear parts | |
77.040.10 | H22 | GB/T 18449.1-2001 | 金属努氏硬度试验 第1部分: 试验方法 | Metallic knoop hardness test Part 1: Test method | NEQ ISO 4545:1993(E) |
77.040.10 | H22 | GB/T 18449.2-2001 | 金属努氏硬度试验 第2部分: 硬度计的检验 | Metallic knoop hardness test--Part 2: Verification of hardness testers | IDT ISO 4546:1993 |
77.040.10 | H22 | GB/T 18449.3-2001 | 金属努氏硬度试验 第3部分: 标准硬度块的标定 | Metallic knoop hardness test--Part 3: Calibration of hardness reference blocks | IDT ISO 4547:1993 |
77.140.65 | H49 | GB/T 18579-2001 | 高碳铬轴承钢丝 | High-carbon chromium bearing steel wires | NEQ ASTM A295:1994 |
77.060 | H25 | GB/T 18590-2001 | 金属和合金的腐蚀 点蚀评定方法 | Corrosion of metals and alloys--Evaluation of pitting corrosion | IDT ISO 11463-1995 |
ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) | 国際整合 |