中国国家標準(GB,GB/T規格)
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) |  規格名称(英語) |
国際整合 |
|---|---|---|---|---|---|
| 29.020 | K04 | GB 156-1993 | 标准电压 | Standard voltages | NEQ IEC 60038-83 |
| 29.020 | K04 | GB 311.1-1997 | 高压输变电设备的绝缘配合 | Insulation co-ordination for high voltage transmission and distribution equipment | NEQ IEC 60071-1:1993 |
| 29.080 | K40 | GB/T 311.7-1988 | 高压输变电设备的绝缘配合使用导侧 | Application guide for insulation co-ordination of high voltage transmission and transformation equipment | |
| 29.040.20 | E38 | GB/T 507-1986 | 绝缘油介电强度测定法 | Insulating oils--Determination of the dielectric strength | NEQ IEC 60156 |
| 29.160 | K20 | GB 755-2000 | 旋转电机 定额和性能 | Rotating electrical machines--Rating and performance | IDT IEC 60034-1:1996 |
| 29.160 | K20 | GB/T 756-1990 | 旋转电机 圆柱形轴伸 | Cylindrical shaft extension for rotating electrical machines | |
| 29.160 | K20 | GB/T 757-1993 | 旋转电机 圆锥形轴伸 | Conical snaft extension for rotating electrical machines | |
| 29.020 | K04 | GB/T 762-1996 | 标准电流 | Standard current | EQV IEC 60059-1938 |
| 29.060.20 | K13 | GB/T 767-1965 | 电力电缆介质损失角正切值测量方法 (交流高压电桥法) | Methods of measurement of value of dielectric loss tangent for power cables (high voltage alternating current bridge method) | |
| 29.080.10 | K48 | GB 772-1987 | 高压绝缘子瓷件 技术条件 | Technical specifications of porcelain element for high voltage insulators | NEQ IEC 60233-74 |
| 29.080.10 | K48 | GB/T 773-1993 | 低压绝缘子瓷件技术条件 | Specification of porcelain element for low voltage insulators | |
| 29.080.10 | K48 | GB/T 774-1993 | 架空通信线路针式瓷绝缘子 | Pin-type insulators of ceramic material for overhead telegraph lines | NEQ IEC 60383-83 |
| 29.080.10 | K50 | GB/T 775.1-1987 | 绝缘子试验方法 第1部分:一般试验方法 | Test method for insulators - Part 1:General test methods | |
| 29.080.10 | K50 | GB/T 775.2-1987 | 绝缘子试验方法 第2部分:电气试验方法 | Test method for insulators - Part 2:Electrical test methods | |
| 29.080.10 | K50 | GB/T 775.3-1987 | 绝缘子试验方法 第3部分:机械试验方法 | Test method for insulators - Part 3:Mechanical test methods | |
| 29.160.20 | K20 | GB/T 997-1981 | 电机结构及安装型式代号 | Symbols for types of construction and mounting arrangements of rotating electrical machinery | NEQ IEC 60034-7-72 |
| 29.020 | K63 | GB/T 999-1988 | 直流电力牵引额定电压 | Voltage ratings of D.C electric traction system | NEQ IEC 60038-83 |
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
国際整合 |
| 29.080.10 | K48 | GB 1000.1-1988 | 高压线路针式瓷绝缘子技术条件 | Pin insulators of ceramic material for high voltage overhead lines--Technical specifications | |
| 29.080.10 | K48 | GB/T 1000.2-1988 | 高压线路针式瓷绝缘子尺寸与特性 | Pin insulators of ceramic material for high voltage verhead lines--Dimensions and characteristics | |
| 29.080.10 | K48 | GB 1001-1986 | 盘形悬式绝缘子技术条件 | The cap and pin type insulators--Technical specification | |
| 29.120.30 | K65 | GB 1002-1996 | 家用和类似用途单相插头插座 型式、基本参数和尺寸 | Single phase plugs and socket-outlets for household and similar purposes-Types,basic parameters and dimensions | |
| 29.120.30 | K30 | GB 1003-1999 | 家用和类似用途三相插头插座型式、基本参数和尺寸 | Three phases plugs and socket-outlets for household and similar purposes-Types,basic parameters and dimensions | |
| 29.140.10 | K74 | GB/T 1006-1967 | 白炽灯灯座型式、基本参数与尺寸 | Types, fundamental parameters and dimensions of holders for incandescent lamps | |
| 29.160.20 | K21 | GB/T 1029-1993 | 三相同步电机试验方法 | Test procedures for three-phase synchronous machines | NEQ IEC 60034-2 |
| 29.160.20 | K22 | GB/T 1032-1985 | 三相异步电动机试验方法 | Test procedure for three-phase induction motors | |
| 29.180 | K41 | GB 1094.1-1996 | 电力变压器 第一部分 总则 | Power transformers--Part 1: General | EQV IEC 60076-1-1993 |
| 29.180 | K41 | GB 1094.2-1996 | 电力变压器 第二部分 温升 | Power transformers--Part 2: Temperature rise | EQV IEC 60076-2-1993 |
| 29.180 | K41 | GB 1094.3-1985 | 电力变压器 第三部分 绝缘水平和绝缘试验 | Power transformers--Part 3: Insulation levels and dielectric tests | NEQ IEC 60076-3-80 |
| 29.180 | K41 | GB 1094.5-1985 | 电力变压器 第五部分 承受短路的能力 | Power transformers--Part 5: Ability to withstand short circuit | NEQ IEC 60076-5-76 |
| 29.060.10 | K11 | GB/T 1179-1999 | 圆线同心绞架空导线 | Round wire concentric lay overhead electrical stranded conductors | EQV IEC 61089:1991 |
| 29.180 | K41 | GB 1207-1997 | 电压互感器 | Voltage transformers | EQV IEC 60186:1987 |
| 29.180 | K41 | GB 1208-1997 | 电流互感器 | Current transformers | EQV IEC 60185:1987 |
| 29.035.99 | K15 | GB/T 1303.1-1998 | 环氧玻璃布层压板 | Epoxide woven glass fabric laminated sheet | NEQ IEC 60893-3-2:1993 |
| 29.040.20 | K15 | GB/T 1305-1985 | 电气绝缘热固性层压材料检验、标志、包装、运输和贮存通用规则 | The general rules of electrical insulating laminated materials based on thermosetting resins for examining,marking, packing, transporation and storage | |
| 29.040.20 | K15 | GB/T 1309-1987 | 电气绝缘漆布试验方法 | Test methods for varnished fabrics for electrical insulation | EQV IEC 60394-2-72 |
| 29.040.20 | K15 | GB/T 1310-1987 | 电气绝缘漆布检验、标志、包装、运输、贮存通用规则 | General rules for inspection, packaging, storage transportation and of varnished fabrics for electrical insulation | |
| 29.160.30 | K23 | GB/T 1311-1989 | 直流电机试验方法 | Test procedure for direct current machines | NEQ IEEE 113-73 |
| 29.140.30 | K74 | GB 1312-1991 | 管形荧光灯座和启动器座技术条件 | Technical requirements of lampholders for tubular fluorescent lamps and starterholders | NEQ IEC 60400-87 |
| 29.080.10 | K48 | GB/T 1386.1-1997 | 低压电力线路绝缘子 第1部分：低压架空电力线路绝缘子 | Insulators for low voltage power lines Part 1: Insulators for low voltage overhead power lines | NEQ IEC 60383:1983 |
| 29.080.10 | K48 | GB/T 1386.2-1997 | 低压电力线路绝缘子 第2部分：架空电力线路用拉紧绝缘子 | Insulators for low voltage power lines Part 2: Strain insulators for overhead power lines | NEQ IEC 60383:1983 |
| 29.080.10 | K48 | GB/T 1386.3-1997 | 低压电力线路绝缘子 第3部分：低压布线用绝缘子 | Insulators for low voltage power lines Part 3: Insulators for low voltage wiring | NEQ IEC 60383-1983 |
| 29.080.10 | K48 | GB/T 1386.4-1997 | 低压电力线路绝缘子 第4部分：电车线路用绝缘子 | Insulators for low voltage power lines Part 4: Insulators for trolley overhead lines | NEQ IEC 60383-1983 |
| 29.080.10 | K48 | GB 1390-1993 | 高压线路蝶式绝缘子 | Shackle insulators for high voltage overhead lines | NEQ IEC 60383-83 |
| 29.280 | S04 | GB 1402-1998 | 铁道干线电力牵引交流电压 | A.C.Voltage of electric traction for the railway main lines | EQV IEC 60850:1988 |
| 29.140.10 | K74 | GB 1406-2001 | 螺口式灯头的型式和尺寸 | Types and dimensions of Edison screw lamp caps | EQV IEC 60061-1:1999 |
| 29.140.10 | K74 | GB 1407-1996 | 卡口式灯头的形式和尺寸 | Types and dimentions of bayonet lamp caps | EQV IEC 60061-1Q-1994 |
| 29.035.01 | K15 | GB/T 1408.1-1999 | 固体绝缘材料电气强度试验方法 工频下的试验 | Methods of test for electric strength of solid insulating materials-Tests at power frequencies | EQV IEC 60243-1:1988 |
| 29.040.20 | K15 | GB/T 1409-1988 | 固体绝缘材料在工频、音频、高频(包括米波长在内)下相对介电常数和介质损耗因数的试验方法 | Methods for the determination of the permittivity and dielectric dissipation factor of solid electrical insulating materials at power audio and radio frequensies including metre wavelengths | EQV IEC 60250-69 |
| 29.040.20 | K10 | GB/T 1410-1989 | 固体绝缘材料体积电阻率和表面电阻率试验方法 | Methods of test for volume resistivity and surface resistivity of solid insulating materials | EQV IEC 60093-80 |
| 29.040.20 | K15 | GB/T 1411-1978 | 固体电工绝缘材料高压小电流间歇耐电弧试验方法 | Solid electric insulating materials--Test methods of high-voltage small-current intermittent arc resistance | |
| 29.140.10 | K35 | GB 1444-1987 | 防爆灯具专用螺口式灯座 | Edison screw lampholders specially used for explosion-proof luminaires | |
| 29.040.30 | H66 | GB/T 1475-1989 | 镓 | Gallium | NEQ ГOCT 12797-77 |
| 29.140.10 | K74 | GB/T 1483-2001 | 螺口式灯头的量规 | Gauges of edison screw lamp caps | EQV IEC 60061-3:1999 |
| 29.240.30; | Q30 | GB/T 1549-1994 | 钠钙硅铝硼玻璃化学分析方法 | Methods of chemical analysis of sodalime-alumina and borosilicate glass | |
| 29.045 | H21 | GB/T 1555-1997 | 半导体单晶晶向测定方法 | Test methods for determining the orientation of a semiconductor single crystal | EQV ASTM F26-87a |
| 29.045 | H21 | GB/T 1558-1997 | 硅中代位碳原子含量红外吸收测量方法 | Test method for substitutional atomic carbon content of silicon by infrared absorption | EQV ASTM F123-91 |
| 29.040.20; | K15 | GB/T 1736-1979 | 绝缘漆漆膜制备法 | Method of producing films of electrical insulating varnishes on test panels | |
| 29.040.20; | K15 | GB/T 1738-1979 | 绝缘漆漆膜吸水率测定法 | Method of test for water absorption rate of electrical insulating varnish films | |
| 29.040.20; | K15 | GB/T 1739-1979 | 绝缘漆漆膜耐油性测定法 | Method of test for transformer oil resistance of electrical insulating varnish films | |
| 29.040.20 | Y32 | GB 1913.1-1990 | 未漂浸渍绝缘纸 | Unbleached impregnating insulating paper | NEQ ГOCT 3441-77 |
| 29.040.20 | Y32 | GB 1913.2-1990 | 漂白浸渍绝缘纸 | Bleached impregnating insulating paper | |
| 29.160 | K20 | GB 1971-1980 | 电机线端标志与旋转方向 | Terminal markings and direction of rotation of rotating electrical machines | |
| 29.020 | K04 | GB/T 1980-1996 | 标准频率 | Standard frequencies | EQV IEC 60196-1965 |
| 29.040.20 | K15 | GB/T 1981-1989 | 有溶剂绝缘漆试验方法 | Test methods for insulating varnishes containing solvent | NEQ IEC 60464-2-74 |
| 29.120.50 | K43 | GB 1984-1989 | 交流高压断路器 | Alternating current high-voltage circuit-breakers | NEQ IEC 60056-87 |
| 29.120.40 | K43 | GB 1985-1989 | 交流高压隔离开关和接地开关 | Alternating current high-voltage disconnectors and earthing switches | EQV IEC 60129-84 |
| 29.160 | K20 | GB/T 1993-1993 | 旋转电机冷却方法 | Cooling methods for rotating electrical machines | |
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
国際整合 |
| 29.120.30 | K65 | GB 2099.1-1996 | 家用和类似用途插头插座 第一部分: 通用要求 | Plugs and socket-outlets for household and similar purposes--Part 1: General requirements | EQV IEC 60884-1-1994 |
| 29.120.30 | K65 | GB 2099.2-1997 | 家用和类似用途插头插座 第二部分: 器具插座的特殊要求 | Plugs and socket-outlets for household and similar purposes--Part 2: Particular requirements for socket-outlets for appliances | EQV IEC 60884-2-2:1989 |
| 29.120.30 | K65 | GB 2099.3-1997 | 家用和类似用途插头插座 第二部分: 转换器的特殊要求 | Plugs and socket-outlets for household and similar purposes--Part 2: Particular requirement for adaptors | IDT IEC 60884-2-5-1995 |
| 29.140 | K74 | GB 2313-1993 | 管形荧光灯镇流器一般要求和安全要求 | Ballasts for tubular fluorescent lamps general and safety requirements | IDT IEC 60920-90 |
| 29.240.10 | K47 | GB 2314-1997 | 电力金具通用技术条件 | General technical requirements for electric power fittings | NEQ IEC TC 11 |
| 29.240.20 | K51 | GB/T 2315-2000 | 电力金具 标称破坏载荷系列及连接型式尺寸 | Nominal failing load series and coupling dimensions for electric power fittings | |
| 29.240.20 | K51 | GB/T 2317.1-2000 | 电力金具 机械试验方法 | Mechanical tests for electric power fittings | |
| 29.240.20 | K51 | GB/T 2317.2-2000 | 电力金具 电晕和无线电干扰试验 | Corona and RIV tests for electric power fittings | NEQ IEC 61284:1997 |
| 29.240.20 | K51 | GB/T 2317.3-2000 | 电力金具 热循环试验方法 | Heat cycle tests for electric power fittings | |
| 29.240.20 | K51 | GB/T 2317.4-2000 | 电力金具 验收规则, 标志与包装 | Acceptance inspection,marking and packing for electric power fittings | |
| 29.240.20 | K51 | GB/T 2337-1985 | 预绞丝 | Preformed armour rods | |
| 29.240.20 | K51 | GB/T 2336-2000 | 防振锤技术条件 | Technical requirements for damper | |
| 29.240.20 | K51 | GB/T 2338-1985 | 间隔棒 | Spacer | |
| 29.240.20 | K47 | GB/T 2340-1998 | T形线夹 | T-connector | |
| 29.240.20 | K47 | GB/T 2341-1998 | 设备线夹 | Terminal clamp | |
| 29.020 | K04 | GB/T 2681-1981 | 电工成套装置中的导线颜色 | Colours of insulated conductors used in electrical assembly devices | |
| 29.020 | K04 | GB/T 2682-1981 | 电工成套装置中的指示灯和按钮的颜色 | Colours of indicator lights and push-buttons used in electrical assembly devices | |
| 29.240.20 | K51 | GB 2694-1981 | 输电线路铁塔制造技术条件 | Transmission line towers--Technical requirements for manufacturing | |
| 29.140.10 | K72 | GB 2797-1994 | 灯头总技术条件 | General specifications for lamp caps | |
| 29.140.10 | K74 | GB/T 2798-1981 | 圆筒式和凹式灯头的型式和尺寸 | Types and dimensions of cylindrical and recessed caps | |
| 29.140.10 | K74 | GB 2799-2001 | 插脚式灯头的型式和尺寸 | Types and dimensions of pin lamp caps | EQV IEC 60061-1:1999 |
| 29.140.10 | K74 | GB/T 2800-1981 | 预聚焦式灯头的型式和尺寸 | Types and dimensions of prefocus caps | |
| 29.160.30 | K26 | GB/T 2818-1991 | 井用潜水三相异步电动机 | Submersible motor for deep well | |
| 29.160.40 | K52 | GB/T 2820.1-1997 | 往复式内燃机驱动的交流发电机组 第1部分: 用途、定额和性能 | Reciprocating internal combustion engine driven alternating current generating sets--Part 1: Application, ratings and performance | EQV ISO 8528.1-1993 |
| 29.160.40 | K52 | GB/T 2820.2-1997 | 往复式内燃机驱动的交流发电机组 第2部分: 发动机 | Reciprocating internal combustion engine driven alternating current generating sets--Part 2: Engines | EQV ISO 8528.2-1993 |
| 29.160.40 | K52 | GB/T 2820.3-1997 | 往复式内燃机驱动的交流发电机组 第3部分: 发电机组用交流发电机 | Reciprocating internal combustion engine driven alternating current generating sets--Part 3: Alternating current generators for generating sets | EQV ISO 8528.3-1993 |
| 29.160.40 | K52 | GB/T 2820.4-1997 | 往复式内燃机驱动的交流发电机组 第4部分: 控制装置和开关装置 | Reciprocating internal combustion engine driven alternating current generating sets--Part 4: Controlgear and switchgear | EQV ISO 8528.4-1993 |
| 29.160.40 | K52 | GB/T 2820.5-1997 | 往复式内燃机驱动的交流发电机组 第5部分: 发电机组 | Reciprocating internal combustion engine driven alternating current generating sets--Part 5: Generating sets | EQV ISO 8528.5-1993 |
| 29.160.40 | K52 | GB/T 2820.6-1997 | 往复式内燃机驱动的交流发电机组 第6部分; 试验方法 | Reciprocating internal combustion engine driven alternating current generating sets--Part 6: Test methods | EQV ISO 8528.6:1993 |
| 29.040.30 | H88 | GB/T 2881-1991 | 工业硅技术条件 | Technical requirements for silicon metal | |
| 29.020 | K04 | GB/T 2900.1-1992 | 电工术语 基本术语 | Electrotechnical terminology - Fundamental terms | NEQ IEC 60050 |
| 29.020 | K04 | GB/T 2900.7-1996 | 电工术语 电炭 | Electrotechnical terminology--Electrical carbon | NEQ IEC 60276 |
| 29.080.10 | K04 | GB/T 2900.8-1995 | 电工术语 绝缘子 | Electrotechnical terminology--Insulator | EQV IEC 60471 |
| 29.180 | K41 | GB/T 2900.15-1997 | 电工术语 变压器、互感器、调压器和电抗器 | Electrotechnical terminology Transformer,instrument transformer,voltage regulator and reactor | NEQ IEC 60050(421):1990 |
| 29.020 | K04 | GB/T 2900.16-1996 | 电工术语 电力电容器 | Electrotechnical terminology--Power capacitors | NEQ IEC 60050 (436)-1990 |
| 29.020 | K04 | GB/T 2900.35-1998 | 电工术语 爆炸性环境用电气设备 | Electrotechnical terminology electrical apparatus for explosivs atmospheres | NEQ IEC 60050(426)-1990 |
| 29.020 | K63 | GB/T 2900.36-1996 | 电工术语 电力牵引 | Electrotechnical terminology--Electric traction | IDT IEC 60050(811)-1991 |
| 29.020 | K55 | GB/T 2900.45-1996 | 电工术语 水轮机、蓄能泵和水泵水轮机 | Electrotechnical terminology--Hydraulic turbine, storage pump and pump-turbine | |
| 29.240.20 | K47 | GB/T 2900.51-1998 | 电工术语 架空线路 | Overhead lines--Vocabulary | IDT IEC 60050(466):1990 |
| 29.240 | K04 | GB/T 2900.52-2000 | 电工术语 发电、输电及配电 发电 | Electrotechnical terminology Generation,transmission and distribution of electricity--Generation | EQV IEC 60050(602):1983 |
| 29.060 | K13 | GB/T 2951.1-1997 | 电缆绝缘和护套材料通用试验方法 第1部分: 通用试验方法 第1节: 厚度和外形尺寸测量--机械性能试验 | Common test methods for insulating and sheathing materials of electric cables--Part 1: Methods for general application--Section one: Measurement of thickness and overall dimensions--Tests for determining the mechanical properties | IDT IEC 60811-1-1:1993 |
| 29.060 | K13 | GB/T 2951.2-1997 | 电缆绝缘和护套材料通用试验方法 第1部分: 通用试验方法 第2节: 热老化试验方法 | Common test methods for insulating and sheating materials of electric cables--Part 1: Methods for general application--Section two: Thermal ageing methods | IDT IEC 60811-1-2-1985 |
| 29.060 | K13 | GB/T 2951.3-1997 | 电缆绝缘和护套材料通用试验方法 第1部分: 通用试验方法 第3节: 密度测定方法--吸水试验--收缩试验 | Common test methods for insulating and sheathing materials of electric cable--Part 1: Methods for general application--Section three: Methods for determining the density--Water absorption tests--Shrinkage test | IDT IEC 60811-1-3-1993 |
| 29.060 | K13 | GB/T 2951.4-1997 | 电缆绝缘和护套材料通用试验方法 第1部分; 通用试验方法 第4部分: 低温试验 | Common test methods for insulating and sheating material of electric cables--Part 1: Methods for general application--Section four:Test at low temperature | IDT IEC 60811-1-4-1985 |
| 29.060 | K13 | GB/T 2951.5-1997 | 电缆绝缘和护套材料通用试验方法 第2部分: 弹性体混合料专用试验方法 第1节: 耐臭氧试验--热延伸试验 浸矿物油试验 | Common test methods for insulating and sheathing materials of electric cables--Part 2: Methods specific to elastomeric compounds-- Section one:Ozone resistance test--Hot set test--Mineral oil immersion test | IDT IEC 60811-2-1-1986 |
| 29.060 | K13 | GB/T 2951.6-1997 | 电缆绝缘和护套材料通用试验方法 第3部分: 聚氯乙烯混合料专用试验方法 第1节: 高温压力试验--抗开裂试验 | Common test methods for insulating and sheathing materials of electric cables--Part 3: Methods specific to PVC compounds--Section one--Pressure test at high temperature--Test for resistance to cracking | IDT IEC 60811-3-1:1985 |
| 29.060 | K13 | GB/T 2951.7-1997 | 电缆绝缘和护套材料通用试验方法 第3部分: 聚氯乙烯混合料专用试验方法 第2节: 失重试验--热稳定性试验 | Common test methods for insulating and sheathing materials of electric cables--Part 3: Methods specific to pvc compounds--Section two:Loss of mass test--Thermal stability test | IDT IEC 60811-3-2:1985 |
| 29.060 | K13 | GB/T 2951.8-1997 | 电缆绝缘和护套材料通用试验方法 第4部分: 聚乙烯和聚丙烯混合料专用试验方法 第1节: 耐环境应力开裂试验--空气热老化后的卷绕试验--熔体指数测量方法--聚乙烯中炭黑和/或矿物质填料含量的测量方法 | Common test methods for insulating and sheathing materials of electric cables--Part 4: Methods specific to polyethylene and polypropylene compounds--Section one:Resistance to environmental stress cracking--Wrapping test after thermal ageing ageing in | IDT IEC 60811-4-1-1985 |
| 29.060 | K13 | GB/T 2951.9-1997 | 电缆绝缘和护套材料通用试验方法 第4部分: 聚乙烯和聚丙烯混合料专用试验方法 第2节: 预处理后断裂伸长率试验--预处理后卷绕试验--空气热老化后的卷绕试验--测定质量的增加 附录A:长期热稳定性试验 附录B:铜催化 | Common test methods for insulating and sheathing materials of electric cables--Part 4: Methods specific to polyethylene and polypropylene compounds-Section two: Elongation at break after pre-conditioning--Wrapping test after pre-conditioning--Wr | IDT IEC 60811-4-2:1990 |
| 29.060 | K13 | GB/T 2951.10-1997 | 电缆绝缘和护套材料的通用试验方法 第5部分: 填充膏专用试验方法 第1节: 滴点--油分离--低温脆性--总酸值--腐蚀性--23℃时的介电常数--23℃和100℃时的直流电阻率 | Common test methods for insulating and sheathing materials of electric cables--Part 5: Methods specific to filling compounds-- Section one: Drop-point--Separation of oil--Lower temperature brittleness--Total acid number--Absence of corrosive componen | IDT IEC 60811-5-1-1990 |
| 29.060 | K13 | GB/T 2951.21-1994 | 电线电缆机械物理性能试验方法 软电线和软电缆曲挠试验 | Test method for determining mechanical and physical properties of electric cables and wires--Flexing test for flexible cables and wires | EQV IEC 60227-2-79 |
| 29.060 | K13 | GB/T 2951.23-1994 | 电线电缆机械物理性能试验方法 弯曲试验 | Test method for determining mechanical and physical properties of electric cables and wires--Bending test | |
| 29.060 | K13 | GB/T 2951.24-1994 | 电线电缆机械物理性能试验方法 外护层环烷酸铜含量试验 | Test method for determining mechanical and physical properties of electric cables and wires--Test for copper naphthenate content of protective coverings | |
| 29.060 | K13 | GB/T 2951.25-1994 | 电线电缆机械物理性能试验方法 外护层厌氧性细菌腐蚀试验 | Test method for determining mechanical and physical properties of electric cables and wires--Test for anaerobe-corrosion of protectrive coverings | |
| 29.060 | K13 | GB/T 2951.26-1994 | 电线电缆机械物理性能试验方法 盐浴槽试验 | Test method for determining mechanical and physical properties of electric cables and wires--Saline bath test | |
| 29.060 | K13 | GB/T 2951.27-1994 | 电线电缆机械物理性能试验方法 腐蚀扩展试验 | Test method for determining mechanical and physical properties of electric cables and wires--Corrosion spread test | |
| 29.060 | K13 | GB/T 2951.28-1994 | 电线电缆机械物理性能试验方法 挤出外套刮磨试验 | Test method for determining mechanical and physical properties of electric cables and wires--Test for abrasion of extruded oversheaths | |
| 29.060 | K13 | GB/T 2951.34-1994 | 电线电缆机械物理性能试验方法 抗撕试验 | Test method for determining mechanical and physical properties of electric cables and wires--Tear test | |
| 29.060 | K13 | GB/T 2951.37-1994 | 电线电缆机械物理性能试验方法 氧化诱导期试验 | Test method for determining mechanical and physical properties of electric cables and wires--Test for oxidative inductive time | |
| 29.060 | K10 | GB/T 2951.38-1986 | 电线电缆 白蚁试验方法 | Termite test methods for wires and cables | |
| 29.060.20 | K13 | GB/T 2952.1-1989 | 电缆外护层总则 | Protective coverings for electric cables - General | |
| 29.060.20 | K13 | GB/T 2952.2-1989 | 电缆外护层金属套电缆通用外护层 | Protective coverings for electric cables - General protective coverings for cables with metallic sheath | NEQ IEC 60055-2-81 |
| 29.060.20 | K13 | GB/T 2952.3-1989 | 电缆外护层 非金属套电缆通用外护层 | Protective coverings for electric cables - General protective coverings for cables with non-metallic sheath | NEQ IEC 60502-83 |
| 29.060.20 | K13 | GB/T 2952.4-1989 | 电缆外护层 铅套充油电缆特种外护层 | Protectives coverings for electric cables - Specific protective coverings for oil-filled cables with lead sheath | NEQ IEC 60141-1-76 |
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
国際整合 |
| 29.060 | K13 | GB/T 3048.1-1994 | 电线电缆电性能试验方法 总则 | Test methods for determining electrical properties of electric cables and wires--General | NEQ IEC 60885-2 |
| 29.060 | K13 | GB/T 3048.2-1994 | 电线电缆电性能试验方法 金属导体材料电阻率试验 | Test methods for determining electrical properties of electric cables and wires--Measurement of resistivity of metallic conductive materials | EQV IEC 60468-74 |
| 29.060 | K13 | GB/T 3048.3-1994 | 电线电缆电性能试验方法 半导电橡塑材料体积电阻率试验 | Test methods for determining electrical properties of electric cables and wires--Measurement of volumeresistivity of semi-conducting rubbers and plastics | NEQ IEC 60885-2 |
| 29.060 | K13 | GB/T 3048.4-1994 | 电线电缆电性能试验方法 导体直流电阻试验 | Test methods for determining electrical properties of electric cables and wires--Measurement of D.C. resistance of conductors | NEQ IEC 60885-2 |
| 29.060 | K13 | GB/T 3048.5-1994 | 电线电缆电性能试验方法 绝缘电阻试验 检流计比较法 | Test methods for determining electrical properties of electric cables and wires--Determining insulation resistance--Comparison-galvanometer method | NEQ IEC 60885-2 |
| 29.060 | K13 | GB/T 3048.6-1994 | 电线电缆电性能试验方法 绝缘电阻试验 电压-电流计 | Test methods for determining electrical properties of electric cables and wires--Determining insulation resistance--Voltmeter-ammeter method | NEQ IEC 60885-2 |
| 29.060 | K13 | GB/T 3048.7-1994 | 电线电缆电性能试验方法 耐电痕试验 | Test methods for determining electrical properties of electric cables and wires--Tracking resistance test | NEQ IEC 60885-2 |
| 29.060 | K13 | GB/T 3048.8-1994 | 电线电缆电性能试验方法 交流电压试验 | Test methods for determining electrical properties of electric cables and wires--A.C.voltage tests | NEQ IEC 60060-89 |
| 29.060 | K13 | GB/T 3048.9-1994 | 电线电缆电性能试验方法 绝缘线芯工频火花试验 | Test methods for determining electrical properties of electric cables and wires--A.C. spark test of insulated cores | NEQ IEC 60885-2 |
| 29.060 | K13 | GB/T 3048.10-1994 | 电线电缆电性能试验方法 挤出防蚀扩套火花试验 | Test methods for determining electrical properties of electric cables and wires--Spark of extruded anti-corrosion protective sheaths | NEQ IEC 60885-2 |
| 29.060 | K13 | GB/T 3048.11-1994 | 电线电缆电性能试验方法 介质损失角正切试验 | Test methods for determining electrical properties of electric cables and wires--Dielectric dissipation factor measurement | NEQ IEC 60885-2 |
| 29.060 | K13 | GB/T 3048.12-1994 | 电线电缆电性能试验方法 局部放电试验 | Test methods for determining electrical properties of electric cables and wires--Partial discharge test | NEQ IEC 60885-3-88 |
| 29.060 | K13 | GB/T 3048.13-1992 | 电线电缆 冲击电压试验方法 | Electric cables and wires--Method for impulse voltage test | NEQ IEC 60060.1~.4-73 |
| 29.060 | K13 | GB/T 3048.14-1992 | 电线电缆 直流电压试验方法 | Electric cables and wires--Method for D.C. voltage test | NEQ IEC 60060.1 - .4-73 |
| 29.060 | K13 | GB/T 3048.15-1992 | 电线电缆 绝缘线芯直流火花试验方法 | Electric cables and wires--D.C.spark test method for insulated cores | IDT BS 5099-74 |
| 29.060 | K13 | GB/T 3048.16-1994 | 电线电缆电性能试验方法 表面电阻试验 | Test methods for determining electrical properties of electric cables and wires--Surface resistance test | NEQ IEC 60885-2 |
| 29.040 | Q51 | GB/T 3072-1982 | 石墨电极 | Graphite electrodes | |
| 29.040 | Q51 | GB/T 3073-1982 | 高功率石墨电极 | High power graphite electrodes | |
| 29.040 | Q51 | GB/T 3074.1-1982 | 石墨电极抗折强度测定方法 | Method for the determination of the flexure strength of graphite electrodes | |
| 29.040 | Q51 | GB/T 3074.2-1982 | 石墨电极弹性模量测定方法 | Method for the determination of the elastic modulus of graphite electrodes | |
| 29.040 | Q51 | GB/T 3074.3-1982 | 石墨电极氧化性测定方法 | Method for the determination of the oxidation resistance of graphite electrodes | |
| 29.040 | Q51 | GB/T 3074.4-1982 | 石墨电极热膨胀系数 (CTE) 测定方法 | Method for the determination of the coefficient thermal expansion of graphite electrodes | |
| 29.120.50 | H62 | GB 3132-1982 | 保险铅丝 | Safety fuses | |
| 29.060.10 | H61 | GB/T 3195-1997 | 导电用铝线 | Aluminium wires for electric conduction purporse | NEQ ASTM B230 |
| 29.040.10 | K10 | GB/T 3217-1992 | 永磁(硬磁)材料磁性试验方法 | Methods of test of the magnetic properties of permanent magnetic (magnetically hard) materials | NEQ IEC 60404-5:1982 |
| 29.120.60 | K40 | GB/T 3309-1989 | 高压开关设备常温下的机械试验 | Mechanical test at ambient temperature for high-voltage switchgear | NEQ IEC 60056-81 |
| 29.280 | S41 | GB/T 3317-1982 | 电力机车通用技术条件 | General technical specifications for electric locomotives | NEQ IEC 60165-73 |
| 29.280 | S41 | GB/T 3318-1982 | 电力机车组装后的检查与试验规则 | Rules for the inspecting and testing of electric locomotives after completion of construction | NEQ IEC 60165-73 |
| 29.280 | S41 | GB/T 3319-1998 | 电力机车和电动车组额定功率的确定 | Definition of the rated output of electric locomotives and motive power units | IDT UIC 614:1990 |
| 29.080.20 | H48 | GB/T 3640-1988 | 普通碳素钢电线套管 | Plain carbon steel pipes for electric wire | NEQ JIS C8305-82 |
| 29.240.30 | K36 | GB/T 3797-1989 | 电控设备 第二部分: 装有电子器件的电控设备 | Electric-driving controlgear - Part 2: Electric-driving controlgear incorporating electronic devices | |
| 29.020 | K09 | GB/T 3805-1993 | 特低电压(ELV) 限值 | Extra-low voltage (ELV)--limit values | EQV IEC 61201 |
| 29.260.20 | K35 | GB 3836.1-2000 | 爆炸性气体环境用电气设备 第1部分: 通用要求 | Electrical apparatus for explosive gas atmospheres--Part 1: General requirements | EQV IEC 60079-0:1998 |
| 29.260.20 | K35 | GB 3836.2-2000 | 爆炸性气体环境用电气设备 第2部分: 隔爆型“d” | Electrical apparatus for explosive gas atmospheres--Part 2: Flameproof enclosure “d” | EQV IEC 60079-1:1990 |
| 29.260.20 | K35 | GB 3836.3-2000 | 爆炸性气体环境用电气设备 第3部分:增安型“e” | Electrical apparatus for explosive gas atmospheres--Part 3: Increased safety “e” | EQV IEC 60079-7:1990 |
| 29.260.20 | K35 | GB 3836.4-2000 | 爆炸性气体环境用电气设备 第4部分: 本质安全型“I” | Electrical apparatus for explosive gas atmospheres Part 4: Intrinsic safety“I” | EQV IEC 60079-11:1999 |
| 29.260.20 | K35 | GB 3836.5-1987 | 爆炸性环境用防爆电气设备 正压型电气设备 "p" | Electrical apparatus for explosive atmospheres--Pressurized electrical apparatus "p" | NEQ IEC 60079-2 |
| 29.260.20 | K35 | GB 3836.6-1987 | 爆炸性环境用防爆电气设备 充油型电气设备 "o" | Electrical apparatus for explosive atmospheres--Oil immersed electrical apparatus "o" | NEQ IEC 60079-6 |
| 29.260.20 | K35 | GB 3836.7-1987 | 爆炸性环境用防爆电气设备 充砂型电气设备 "q" | Electrical apparatus for explosive atmospheres--Sand filled electrical apparatus"q" | NEQ IEC 60079-5 |
| 29.260.20 | K35 | GB 3836.8-1987 | 爆炸性环境用防爆电气设备 无火花型电气设备 "n" | Electrical apparatus for explosive atmospheres--Non-sparking electrical apparatus "n" | NEQ BS 4683-72 |
| 29.260.20 | K35 | GB 3836.9-1990 | 爆炸性环境用防爆电气设备 浇封型电气设备 "m" | Electrical apparatus for explosive atmospheres - Encapsulated electrical apparatus "m" | |
| 29.260.20 | K35 | GB 3836.10-1991 | 爆炸性环境用防爆电气设备 气密型电气设备"h" | Electrical apparatus for explosive atmospheres - Hermetically sealed electrical apparatus "h" | |
| 29.260.20 | K35 | GB 3836.11-1991 | 爆炸性环境用防爆电器设备 最大试验安全间隙测定方法 | Electrical apparatus for explosive atmospheres - Method of test for ascertainment of maximum experimental safe gap | EQV IEC 60079-1A-75 |
| 29.260.20 | K35 | GB 3836.12-1991 | 爆炸性环境用防爆电器设备 气体或蒸汽混合物按照其最大试验安全间隙和最小点燃电流的分级 | Electrical apparatus for explosive atmospheres - Classification of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents | EQV IEC 60079-12-78 |
| 29.260.20 | K35 | GB 3836.13-1997 | 爆炸性气体环境用电气设备 第13部分: 爆炸性气体环境用电气设备的检修 | Electrical apparatus for explosive gas atmospheres--Part 13: Repair and overhaul for apparatus used in explosive gas atmospheres | NEQ IEC 60079-19:1993 |
| 29.260.20 | K35 | GB 3836.14-2000 | 爆炸性气体环境用电气设备 第14部分: 危险场所分类 | Electrical apparatus for explosive gas atmospheres Part 14: Classification of hazardous areas | IDT IEC 60079-10:1995 |
| 29.260.20 | K35 | GB 3836.15-2000 | 爆炸性气体环境用电气设备 第15部分: 危险场所电气安装(煤矿除外) | Electrical apparatus for explosive gas atmospheres Part 15: Electrical installation in hazardous areas (other than mines) | EQV IEC 60079-14:1996 |
| 29.040;
29. |
H72 | GB/T 3848-1983 | 硬质合金矫顽 (磁) 力测定方法 | Hardmetals--determination of (the magnetization) coercivity | EQV ISO 3326-75 |
| 29.200 | K46 | GB/T 3859.1-1993 | 半导体变流器 基本要求的规定 | Semiconductor convertors--Specification of basic requirements | EQV IEC 60146-1-1-91 |
| 29.200 | K46 | GB/T 3859.2-1993 | 半导体变流器 应用导则 | Semiconductor convertors--Application guide | EQV IEC 60146-1-2-91 |
| 29.200? | K46 | GB/T 3859.3-1993 | 半导体变流器 变压器和电抗器 | Semiconductor convertors--Transformers and reactors | EQV IEC 60146-1-3-1991 |
| 29.200 | K46 | GB/T 3886.1-2001 | 半导体电力变流器 用于调速电气传动系统的一般要求 第1部分: 关于直流电动机传动额定值的规定 | Semiconductor power convertors--Adjustable speed electric drive systems--General requirements Part 1: Rating specifications,particularly for d.c.motor drives | IDT IEC 61136-1:1992 |
| 29.120.60; | K43 | GB 3906-1991 | 3~35kV交流金属封闭式开关设备 | A.C. metal-enclosed switchgear for rated voltages of 3~35kV | NEQ IEC 60298-90 |
| 29.020 | K04 | GB/T 3926-1983 | 中频设备额定电压 | Rated voltage for medium frequency equipment | |
| 29.060.10 | K11 | GB/T 3952-1998 | 电工用铜线坯 | Copper drawing stock for electrical purposes | |
| 29.060.10 | K11 | GB/T 3953-1983 | 电工圆铜线 | Round copper wire for electrical purposes | NEQ ASTM B1-70 |
| 29.060.10 | K11 | GB/T 3955-1983 | 电工圆铝线 | Round aluminium wire for electrical purposes | NEQ ASTM B230-77 |
| 29.060.01 | K13 | GB/T 3956-1997 | 电缆的导体 | Conductors of insulated cables | IDT IEC 60228:1978 |
| 29.180 | K50 | GB/T 3969-1983 | 35kV及以下变压器瓷套 | Porcelain bushing shell for transformer up to 35kV | NEQ IEC 60233-74 |
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
国際整合 |
| 29.060.20 | K13 | GB/T 4011-1983 | 1.2/4.4mm同轴综合通信电缆 | 1.2/4.4mm composite coaxial cable for telecommunication use | NEQ CCITT G611-80 |
| 29.060.20 | K13 | GB/T 4012-1983 | 2.6/9.5mm同轴综合通信电缆 | 2.6/9.5mm composite coaxial cable for telecommunication use | NEQ CCITT G611-80 |
| 29.020 | K09 | GB/T 4026-1992 | 电器设备接线端子和特定导线线端的识别及应用字母数字系统的通则 | Identification of electric equipment terminals and of terminations of certain designated conductors, including general rules for an alphanumeric system | IDT IEC 60445-88 |
| 29.080.10 | K48 | GB/T 4056-1994 | 高压线路悬式绝缘子连接结构和尺寸 | Coupling dimensions of suspension insulators for high voltage lines | EQV IEC 60120-84 |
| 29.020 | K09 | GB/T 4064-1983 | 电气设备安全设计导则 | General guide for designing of electrical equipment to satisfy safety requirements | |
| 29.060.01 | K12 | GB/T 4074.1-1999 | 绕组线试验方法 第1部分: 一般规定 | Winding wires test methods-Part 1: General | IDT IEC 60851-1:1996 |
| 29.060.01 | K12 | GB/T 4074.2-1999 | 绕组线试验方法 第2部分: 尺寸测量 | Winding wires test methods-Part 2: Determination of dimensions | IDT IEC 60851-2:1996 |
| 29.060.01 | K12 | GB/T 4074.3-1999 | 绕组线试验方法 第3部分: 机械性能 | Winding wires test methods-Part 3: Mechanical properties | IDT IEC 60851-3:1996 |
| 29.060.01 | K12 | GB/T 4074.4-1999 | 绕组线试验方法 第4部分: 化学性能 | Winding wires test methods-Part 4: Chemical properties | IDT IEC 60851-4:1997 |
| 29.060.01 | K12 | GB/T 4074.5-1999 | 绕组线试验方法 第5部分: 电性能 | Winding wires test methods-Part 5: Electrical properties | IDT IEC 60851-5:1996 |
| 29.060.01 | K12 | GB/T 4074.6-1999 | 绕组线试验方法 第6部分: 热性能 | Winding wires test methods-Part 6: Thermal properties | IDT IEC 60851-6:1996 |
| 29.080.20 | K48 | GB/T 4109-1999 | 高压套管技术条件 | Technical specification of high voltage bushing | EQV IEC 60137:1995 |
| 29.035 | K15 | GB/T 4180-2000 | 稀土钴永磁材料 | Permanent magnetic material of rare earth cobalt | |
| 29.240.30 | K32 | GB/T 4205-1984 | 控制电气设备的操作件标准运动方向 | Standard directions of movement for actuators which control the operation of electrical apparatus | EQV IEC 60447-74 |
| 29.040.20 | K15 | GB/T 4206-1984 | 有机硅层压玻璃布板 | Silicone resin glass laminated sheets | NEQ ISO 1642-79 |
| 29.040.20 | K15 | GB/T 4207-1984 | 固体绝缘材料在潮湿条件下相比漏电起痕指数和耐漏电起痕指数的测定方法 | Method for determining the comparative and the proof tracking indices of solid insulating materials under moist conditions | NEQ IEC 60112-79 |
| 29.040.30 | H17 | GB/T 4298-1984 | 半导体硅材料中杂质元素的活化分析方法 | The activation analysis method for the determination of elemental impurities in semiconductor silicon materials | |
| 29.040.30 | H21 | GB/T 4326-1984 | 非本征半导体单晶霍尔迁移率和霍尔系数测量方法 | Extrinsic semiconductor single crystals--measurement of Hall mobility and Hall coefficient | |
| 29.120.50 | K40 | GB/T 4473-1996 | 交流高压断路器的合成试验 | Synthetic testing of high-voltage alternating current circuit-breakers | NEQ IEC 60427-1989 |
| 29.120.50 | K40 | GB/T 4474-1992 | 交流高压断路器的近区故障试验 | Short-line fault tests for A.C. high-voltage circuit-breaker | NEQ IEC 60056-87 |
| 29.080.10 | K50 | GB/T 4585.1-1984 | 交流系统用高压绝缘子人工污秽试验方法 盐雾法 | Artificial pollution tests on high-voltage insulators to be used on a.c.systems--Salt-fog method | IDT IEC 60507-75 |
| 29.080.10 | K50 | GB/T 4585.2-1991 | 交流系统用高压绝缘子人工污秽试验方法 固体层法 | Artificial pollution tests on high-voltage insulators to be used on a.c.systems - solid-layer method | IDT IEC 60507-75 |
| 29.100.10 | L17 | GB/T 4596-1984 | 电子设备用三相变压器形铁心 | E-cores for three-phase transformers for use in electronic equipment | |
| 29.020 | K09 | GB 4706.32-1996 | 家用和类似用途电器的安全 热泵、空调器和除湿机的特殊要求 | Safety of household and similar electrical appliances--Particular requirements for electrical heat pumps,air-conditioners and dehumidifiers | IDT IEC 60335-2-40-1992 |
| 29.160.40 | K52 | GB/T 4712-1996 | 自动化柴油发电机组分级要求 | Automatic diesel generating set, requirements of classification | NEQ ΓOCT 14228-1980 |
| 29.020 | K04 | GB/T 4728.11-2000 | 电气简图用图形符号 第11部分 建筑安装平面布置图 | Graphical symbols for diagrams--Part 11: Architectural and topographical installation plans and diagrams | IDT IEC 60617-11:1996 |
| 29.020 | K04 | GB/T 4728.1-1985 | 电气图用图形符号 总则 | Graphical symbols for electrical diagrams--General imformation | NEQ IEC 60617-1-85 |
| 29.020 | K04 | GB/T 4728.2-1998 | 电气简图用图形符号 第2部分 符号要素、限定符号和其它常用符号 | Graphical symbols for diagrams Part 2 Symbol elements,qualifying symbols and other symbols having general application | IDT IEC 60617-2:1996 |
| 29.020 | K04 | GB/T 4728.3-1998 | 电气简图用图形符号 第3部分 导体和连接件 | Graphical symbols for diagrams Part 3 Conductors and connecting devices | IDT IEC 60617-3:1996 |
| 29.020 | K04 | GB/T 4728.4-1999 | 电气简图用图形符号 第4部分: 基本无源元件 | Graphical symbols for diagrams--Part 4:Basic passive components | IDT IEC 60617-4:1996 |
| 29.020 | K04 | GB/T 4728.5-2000 | 电气简图用图形符号 第5部分: 半导体管和电子管 | Graphical symbols for diagrams--Part 5: Semiconductors and electron tubes | IDT IEC 60617-5:1996 |
| 29.020 | K04 | GB/T 4728.6-2000 | 电气简图用图形符号 第6部分: 电能的发生与转换 | Graphical symbols for diagrams--Part 6: Production and conversion of electrical energy | IDT IEC 60617-6:1996 |
| 29.020 | K04 | GB/T 4728.7-2000 | 电气简图用图形符号 第7部分: 开关、控制和保护器件 | Graphical symbols for diagrams--Part 7: Switchgear,controlgear and protective devices | IDT IEC 60617-7:1996 |
| 29.020 | K04 | GB/T 4728.8-2000 | 电气简图用图形符号 第8部分 测量仪表、灯和信号器件 | Graphical symbols for diagrams--Part 8: Measuring instruments,lamps and signalling devices | IDT IEC 60617-8:1996 |
| 29.020 | K04 | GB/T 4728.9-1999 | 电气简图用图形符号 第9部分:电信: 交换和外围设备 | Graphical symbols for diagrams-Part 9: Telecommunications: Switching and peripheral equipment | IDT IEC 60617-9:1996 |
| 29.020 | K04 | GB/T 4728.10-1999 | 电气简图用图形符号 第10部分: 电信: 传输 | Graphical symbols for diagrams-Part 10: Telecommunications: Transmission | IDT IEC 60617-10:1996 |
| 29.160.01 | K20 | GB/T 4772.1-1999 | 旋转电机尺寸和输出功率等级 第1部分：机座号56 - 400和凸缘号55 - 1080 | Dimensions and output series for rotating electrical machines-- Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1080 | IDT IEC 60072-1:1991 |
| 29.160.01 | K20 | GB/T 4772.2-1999 | 旋转电机尺寸和输出功率等级 第2部分：机座号355 - 1000和凸缘号1180 - 2360 | Dimensions and output series for rotating electrical machines-- Part 2: Frame numbers 355 to 1000 and flange numbers 1180 to 2360 | IDT IEC 60072-2:1990 |
| 29.160.01 | K20 | GB/T 4772.3-1999 | 旋转电机尺寸和输出功率等级 第3部分：小功率装入式电动机 凸缘号BF10 - BF50 | Dimensions and output series for rotating electrical machines-- Part 3: Samll built-in motors--Flange numbers BF10 to BF50 | IDT IEC 60072-3:1994 |
| 29.020 | K09 | GB/T 4776-1984 | 电气安全名词术语 | Electrical safety terminology | |
| 29.020 | K04 | GB/T 4798.2-1996 | 电工电子产品应用环境条件 运输 | Environmental conditions existing in the application of electric and electronic products--Transportation | NEQ IEC 60721-3-2-1985 |
| 29.020 | K04 | GB/T 4798.9-1997 | 电工电子产品应用环境条件 产品内部的微气候 | Environmental conditions existing in application of electric and electronic products Microclimates inside products | IDT IEC 60721-3-9:1993 |
| 29.160 | K20 | GB/T 4831-1984 | 电机产品型号编制方法 | Specification for model of rotating electrical machi nes | |
| 29.120.60 | K43 | GB/T 4876-1985 | 交流高压断路器的线路充电电流开合试验 | Line-charging current switching tests for a.c. high voltage circuit-breaker | NEQ IEC 60056 |
| 29.060.10 | K12 | GB 4884-1985 | 绝缘导线的标记 | Marking of insulated conductors | EQV IEC 60391-72 |
| 29.060.10 | K11 | GB/T 4909.1-1985 | 裸电线试验方法 总则 | Test methods for bare wires--General | NEQ IEC 60251-78 |
| 29.060.10 | K11 | GB/T 4909.2-1985 | 裸电线试验方法 尺寸测量 | Test methods for bare wires--Measurement of dimensions | NEQ IEC 60251-78 |
| 29.060.10 | K11 | GB/T 4909.3-1985 | 裸电线试验方法 拉力试验 | Test methods for bare wires--Tensile test | NEQ IEC 60207-66 |
| 29.060.10 | K11 | GB/T 4909.4-1985 | 裸电线试验方法 扭转试验 | Test methods for bare wires--Torsion test | NEQ ISO 2627-73 |
| 29.060.10 | K11 | GB/T 4909.5-1985 | 裸电线试验方法 弯曲试验 反复弯曲 | Test methods for bare wires--Bend test--Reverse bend test | NEQ ISO 2625-73 |
| 29.060.10 | K11 | GB/T 4909.6-1985 | 裸电线试验方法 弯曲试验 单向弯曲 | Test methods for bare wires--Bend test--Single bend test | NEQ BS 1639-64 |
| 29.060.10 | K11 | GB/T 4909.7-1985 | 裸电线试验方法 卷绕试验 | Test methods for bare wires--Mandrel winding test | NEQ IEC 60207-66 |
| 29.060.10 | K11 | GB/T 4909.8-1985 | 裸电线试验方法 硬度试验 布氏法 | Test methods for bare wires--Hardness test--Brinell hardness test | NEQ ISO/R 403-64 |
| 29.060.10 | K11 | GB/T 4909.9-1985 | 裸电线试验方法 镀层连续性试验 多硫化钠法 | Test methods for bare wires--Test for continuity of coating--Sodium polysulfide solution method | NEQ ASTM B33-81 |
| 29.060.10 | K11 | GB/T 4909.10-1985 | 裸电线试验方法 镀层连续性试验 过硫酸铵法 | Test methods for bare wires--Test for continuity of coating--Ammonium persulphate solution method | NEQ IEC 60092-3-80 |
| 29.060.10 | K11 | GB/T 4909.11-1985 | 裸电线试验方法 镀层附着性试验 | Test methods for bare wires--Test for adherence of coating | NEQ ASTM B33-81 |
| 29.060.10 | K11 | GB/T 4909.12-1985 | 裸电线试验方法 镀层可焊性试验 焊球法 | Test methods for bare wires--Solderability test of coating--Solder globule method | NEQ IEC 60068-2-20-77 |
| 29.060.10 | K11 | GB/T 4910-1985 | 镀锡圆铜线 | Tinned round copper wire | NEQ ANSI/ASTM B33-81 |
| 29.160.01 | K20 | GB/T 4942.1-2001 | 旋转电机外壳防护分级(IP代码) | Classification of degrees of protection provided by enclosures of rotating electrical machines (IP code) | IDT IEC 60034-5:1991 |
| 29.020 | K09 | GB/T 4942.2-1993 | 低压电器外壳防护等级 | Degrees of protection provided by enclosures for low-voltage apparatus | EQV IEC 60947-1-1988 |
| 29.160.20 | G24 | GB/T 4997-1993 | 永磁式低速直流测速发电机通用技术条件 | Permanent magnet low speed direct current tachogenerator, General specification for | |
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
国際整合 |
| 29.220.20 | K84 | GB/T 5008.1-1991 | 起动用铅酸蓄电池技术要求 | Lead-acid starter batteries--Technical conditions | NEQ IEC 60095-1-88 |
| 29.220.20 | K84 | GB/T 5008.2-1991 | 起动用铅酸蓄电池 产品品种和规格 | Lead-acid starter batteries--Kinds of products and specifications | |
| 29.220.20 | K84 | GB/T 5008.3-1991 | 起动用铅酸蓄电池 端子的尺寸和标记 | Lead-acid starter batteries--Dimension and marking of terminals | |
| 29.060.20 | K13 | GB 5013.1-1997 | 额定电压450/750V及以下橡皮绝缘电缆 第1部分: 一般要求 | Rubber insulated cables of rated voltages up to and including 450/750V-Part 1: General requirements | IDT IEC 60245-1:1994 |
| 29.060.20 | K13 | GB 5013.2-1997 | 额定电压450/750V及以下橡皮绝缘电缆 第2部分: 试验方法 | Rubber insulated cables of rated voltages up to and including 450/750V-Part 2: Test methods | IDT IEC 60245-2:1994 |
| 29.060.20 | K13 | GB 5013.3-1997 | 额定电压450/750V及以下橡皮绝缘电缆 第3部分: 耐热硅橡胶绝缘电缆 | Rubber insulated cables of rated voltages up to and including 450/750V-Part 3: Heat resistant silicone insulated cables | IDT IEC 60245-3:1994 |
| 29.060.20 | K13 | GB 5013.4-1997 | 额定电压450/750V及以下橡皮绝缘电缆 第4部分: 软线和软电缆 | Rubber insulated cables of rated voltages up to and including 450/750V-Part 4: Cords and flexible cables | IDT IEC 60245-4:1994 |
| 29.060.20 | K13 | GB 5013.5-1997 | 额定电压450/750V及以下橡皮绝缘电缆 第5部分: 电梯电缆 | Rubber insulated cables of rated voltages up to and including 450/750V-Part 5: Lift cables | IDT IEC 60245-5:1994 |
| 29.060.20 | K13 | GB 5013.6-1997 | 额定电压450/750V及以下橡皮绝缘电缆 第6部分: 电焊机电缆 | Rubber insulated cables of rated voltages up to and including 450/750V-Part 6: Arc welding cables | IDT IEC 60245-6:1994 |
| 29.060.20 | K13 | GB 5013.7-1997 | 额定电压450/750V及以下橡皮绝缘电缆 第7部分: 耐热乙烯-乙酸乙烯酯橡皮绝缘电缆 | Rubber insulated cables of rated voltages up to and including 450/750V-Part 7: Heat resistant ethylene-vinyl acetate rubber insulated cables | IDT IEC 60245-7-1994 |
| 29.040.20 | K15 | GB/T 5019-1985 | 电气绝缘云母制品 试验方法 | Mica products for electrical insulation--Methods of test | NEQ IEC 60371-2-73 |
| 29.040.20 | K15 | GB/T 5020-1985 | 电气绝缘云母制品 定义和一般要求 | Mica products for electrical insulation--Definitions and general requirements | NEQ IEC 60371-1-80 |
| 29.040.20 | K15 | GB/T 5021-1985 | 换向器云母板 | Rigid mica material for commutator separators | EQV IEC 60371-3-1-73 |
| 29.035.99 | K15 | GB/T 5022-1998 | 电热设备用云母板 | Specification for Rigid mica materials for heating equipment | EQV IEC 60371-3-3:1983 |
| 29.060 | K13 | GB 5023.1-1997 | 额定电压450/750V及以下聚氯乙烯绝缘电缆 第1部分: 一般要求 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V--Part 1: General requirements | IDT IEC 60227-1:1993 |
| 29.060 | K13 | GB 5023.2-1997 | 额定电压450/750V 及以下聚氯乙烯绝缘电缆 第2部分: 试验方法 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V--Part 2: Test methods | IDT IEC 60227-2:1979 |
| 29.060 | K13 | GB 5023.3-1997 | 额定电压450/750V及以下聚氯乙烯绝缘电缆 第3部分: 固定布线用无护套电缆 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V--Part 3: Non-sheathed cables for fixed wiring | IDT IEC 60227-3:1993 |
| 29.060 | K13 | GB 5023.4-1997 | 额定电压450/750V及以下聚氯乙烯绝缘电缆 第4部分: 固定布线用护套电缆 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V--Part 4: Sheathed cables for fixed wiring | IDT IEC 60227-4:1992 |
| 29.060 | K13 | GB 5023.5-1997 | 额定电压450/750V及以下聚氯乙烯绝缘电缆 第5部分: 软电缆(软线) | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V--Part 5: Flexible cables (cords) | IDT IEC 60227-5:1979 |
| 29.060 | K13 | GB 5023.6-1997 | 额定电压450/750V及以下聚氯乙烯绝缘电缆 第6部分: 电梯电缆和挠性连接用电缆 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V--Part 6: Lift cables and cables for flexible connection | IDT IEC 60227-6:1985 |
| 29.060 | K13 | GB 5023.7-1997 | 额定电压450/750V及以下聚氯乙烯绝缘电缆 第7部分: 2芯或多芯屏蔽和非屏蔽软电缆 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V--Part 7: Flexible cables screened and unscreened with two or more conductors | IDT IEC 60227-7:1995 |
| 29.040.10 | H21 | GB/T 5026-1985 | 软磁合金振幅磁导率测量方法 | The measurement method of amplitude permeability of soft magnetic alloys | NEQ ΓOCT 18334-73 |
| 29.240.20 | K47 | GB/T 5075-2001 | 电力金具名词术语 | Terminology for electric power fittings | |
| 29.020 | L05 | GB/T 5080.1-1986 | 设备可靠性试验 总要求 | Equipment reliability testing--General requirements | IDT IEC 60605-1-78 |
| 29.020 | L05 | GB/T 5080.2-1986 | 设备可靠性试验 试验周期设计导则 | Equipment reliability testing--Guidance for the design of test cycles | NEQ IEC 60605-2 |
| 29.020 | L05 | GB/T 5080.4-1985 | 设备可靠性试验 可靠性测定试验的点估计和区间估计方法 (指数分布) | Equipment reliability testing--Procedure for point estimates and confidence intervals from reliability determination tests(Exponental distribution) | NEQ IEC 60605-4 |
| 29.020 | L05 | GB/T 5080.5-1985 | 设备可靠性试验成功率的验证试验方案 | Equipment reliability testing--compliance test plans for success ratio | IDT IEC 60605-5-82 |
| 29.020 | L05 | GB/T 5080.7-1986 | 设备可靠性试验 恒定失效率假设下的失效率与平均无故障时间的验证试验方案 | Equipment reliability testing--Compliance test plans for failure rate and mean time between failures assuming constant failure rate | IDT IEC 60605-7-78 |
| 29.160.30 | K21 | GB/T 5089-1985 | 交流台扇电动机通用技术条件 | General specification for AC table-fan motors | NEQ IEC 60034-1-69 |
| 29.020 | K04 | GB/T 5094-1985 | 电气技术中的项目代号 | Item designation in electrotechnology | EQV IEC 60750-83 |
| 29.140 | K71 | GB/T 5097-1985 | 黑光源的间接评定方法 | Method for indirect assessment of black light sources | EQV ISO 3059-74 |
| 29.035.20 | K10 | GB/T 5130-1997 | 电气用热固性树脂工业硬质层压板试验方法 | Test methods for industrial rigid laminated sheets based on thermosetting resins for electrical purpose | EQV IEC 60893-2:1992 |
| 29.040.20 | K15 | GB/T 5132-1985 | 电气绝缘层压管试验方法 | Test methods of laminated tubes used for electrical insulation | NEQ ASTM D348-80 |
| 29.040.20 | K15 | GB/T 5133-1985 | 层压棒 | Laminated rods | |
| 29.040.20 | K15 | GB/T 5134-1985 | 电气绝缘层压棒试验方法 | Test methods of laminated rods used for electrical insulation | NEQ ASTM D349-78 |
| 29.020 | K04 | GB/T 5169.7-2001 | 电工电子产品着火危险试验 试验方法 扩散型和预混合型火焰试验方法 | Fire hazard testing for electric and electronic products Test methods Diffusion type and premixed type flame test methods | IDT IEC 60695-2-4/0:1991 |
| 29.020 | K04 | GB/T 5169.14-2001 | 电工电子产品着火危险试验 试验方法 1kW标称预混合型试验火焰和导则 | Fire hazard testing for electric and electronic products Test methods 1kW nominal pre-mixed test flame and guidance | IDT IEC 60695-2-4/1:1991 |
| 29.020 | K04 | GB/T 5169.15-2001 | 电工电子产品着火危险试验 试验方法 500W标称试验火焰和导则 | Fire hazard testing for electric and electronic products Test methods 500W nominal test flame and guidance | IDT IEC 60695-2-4/2:1994 |
| 29.160.30 | K20 | GB/T 5171-1991 | 小功率电动机通用技术条件 | General technical requirements for small power motors | NEQ IEC 60034-1-83 |
| 29.020 | J50 | GB/T 5226.1-1996 | 工业机械电气设备 第1部分: 通用技术条件 | Electrical equipment of industrial machines--Part 1: General requirements | EQV IEC 60204-1-1992 |
| 29.040.30 | H81 | GB/T 5238-1995 | 锗单晶 | Monocrystalline germanium | |
| 29.040.30 | H21 | GB/T 5252-1985 | 锗单晶位错腐蚀坑密度测量方法 | Germanium monocrystal--Inspection of dislocation etch pit density | |
| 29.120.30 | K40 | GB/T 5273-1985 | 变压器、高压电器和套管的接线端子 | Terminals for transformers,high-voltage apparatus and bushings | NEQ IEC 60518-75 |
| 29.160 | K22 | GB/T 5321-1985 | 用量热法测定大型交流电机的损耗及效率 | Measurement of loss and efficiency for large AC electrical machines by the calorimetric method | NEQ IEC 60034-2A-74 |
| 29.060.20 | K13 | GB/T 5441.1-1985 | 通信电缆试验方法 总则 | Test methods for communication cable--General | |
| 29.060.20 | K13 | GB/T 5441.2-1985 | 通信电缆试验方法 工作电容试验 电桥法 | Test methods for communication cable--Capacitance test--Bridge method | |
| 29.060.20 | K13 | GB/T 5441.3-1985 | 通信电缆试验方法 电容耦合及对地电容不平衡试验 | Test methods for communication cable--Capacitance unbalance test | |
| 29.060.20 | K13 | GB/T 5441.4-1985 | 通信电缆试验方法 同轴对端阻抗及内部阻抗不均匀性试验 脉冲法 | Test methods for communication cable--Impedance and impedance irregularities test of coaxial pair--Pulse method | |
| 29.060.20 | K13 | GB/T 5441.5-1985 | 通信电缆试验方法 同轴对特性阻抗实部平均值试验 谐振法 | Test methods for communication cable--Characteristic impedance test of coaxial pair--Resonance method | |
| 29.060.20 | K13 | GB/T 5441.6-1985 | 通信电缆试验方法 串音衰减试验 比较法 | Test methods for communication cable--Crosstalk attenuation test--Comparison method | |
| 29.060.20 | K13 | GB/T 5441.7-1985 | 通信电缆试验方法 衰减常数试验 开短路法 | Test methods for communication cable--Attenuation coe-fficient test--Open and short circuit method | |
| 29.060.20 | K13 | GB/T 5441.8-1985 | 通信电缆试验方法 同轴对衰减常数频率特性试验 比较法 | Test methods for communication cable--Test for frequency characteristic of attenuation coefficient of coaxial pair--Comparison method | |
| 29.060.20 | K13 | GB/T 5441.9-1985 | 通信电缆试验方法 工频条件下理想屏蔽系数试验 | Test methods for communication cable--Test for ideal screening factor measured at power frequency | |
| 29.060.20 | K13 | GB/T 5441.10-1985 | 通信电缆试验方法 同轴对展开长度测量 正弦波法 | Test methods for communication cable--Measurement of actual length of coaxial pair--Sine wave method | |
| 29.080.10 | K48 | GB/T 5582-1993 | 高压电力设备外绝缘污秽等级 | External insulation pollution classes of high-voltage electric power equipments | NEQ IEC 60507-91 |
| 29.060.10 | K11 | GB/T 5584.1-1985 | 电工用铜、铝及其合金扁线 第1 部分: 一般规定 | Rectangular copper or aluminium and its alloy conductors for electrical purposes--Part 1: General | NEQ IEC 60182-3-72 |
| 29.060.10 | K11 | GB/T 5584.2-1985 | 电工用铜、铝及其合金扁线 第2 部分: 铜扁线 | Rectangular copper or aluminium and its alloy conductors for electrical purposes--Part 2: Copper rectangular conductor | NEQ IEC 60182-3-72 |
| 29.060.10 | K11 | GB/T 5584.3-1985 | 电工用铜、铝及其合金扁线 第3 部分: 铝扁线 | Rectangular copper or aluminium and its alloy conductors for electrical purposes--Part 3: Aluminium rectangular conductor | NEQ IEC 60182-3-72 |
| 29.060.10 | K11 | GB/T 5584.4-1985 | 电工用铜、铝及其合金扁线 第4 部分: 铜带 | Rectangular copper or aluminium and its alloy conductors for electrical purposes--Part 4: Copper strip | NEQ IEC 60182-3-72 |
| 29.060.10 | K11 | GB 5585.1-1985 | 电工用铜、铝及其合金母线 第1 部分: 一般规定 | Copper or aluminium and its alloy bus bars for electrical purposes--Part 1: General | NEQ IEC 60028-25 |
| 29.060.10 | K11 | GB 5585.2-1985 | 电工用铜、铝及其合金母线 第2 部分: 铜母线 | Copper or aluminium and its alloy bus bars for electrical purposes--Part 2: Copper bus bar | NEQ IEC 60105-58 |
| 29.060.10 | K11 | GB 5585.3-1985 | 电工用铜、铝及其合金母线 第3 部分: 铝母线 | Copper or aluminium and its alloy bus bars for electrical purposes--Part 3: Aluminium bus bar | NEQ IEC 60105-58 |
| 29.120.20 | K14 | GB/T 5586-1998 | 电触头材料基本性能试验方法 | Test methods for essential porperty of electric contact material | |
| 29.120.20 | K14 | GB/T 5587-1985 | 银基电触头基本形状、尺寸、符号及标注 | Basic shapes, dimensions, symbols and notations of silver based electrical contacts | |
| 29.120.20 | K14 | GB 5588-1985 | 银镍、银铁电触头技术条件 | Technical specification for silver-nickel, silver-iron electrical contacts | |
| 29.120.60 | K35 | GB 5590-1985 | 矿用隔爆型电磁起动器 | Mining type flameproof electric magnetic starters | |
| 29.040.20 | K15 | GB/T 5591.1-1985 | 电气绝缘柔软复合材料 定义及一般要求 | Combined flexible materials for electrical insulation--Definitions and general requirements | NEQ IEC 60626-1-79 |
| 29.040.20 | K15 | GB/T 5591.2-1985 | 电气绝缘柔软复合材料 试验方法 | Combined flexible materials for electrical insulation--Methods of test | NEQ IEC 60626-2-78 |
| 29.040.20 | L32 | GB/T 5598-1985 | 氧化铍瓷导热系数测定方法 | Test method for thermal conductivity of beryllium oxide ceramics | |
| 29.040.20 | K15 | GB/T 5654-1985 | 液体绝缘材料工频相对介电常数、介质损耗因数和体积电阻率的测量 | Measurement of relative permittivity, dielectric dissipation factor at power frequency and volume resistivity of insulating liquids | NEQ IEC 60247-78 |
| 29.280 | S41 | GB 5914.1-2000 | 机车司机室了望条件 | Visibility conditions for driver's cabs of locomotives | |
| 29.280 | S41 | GB 5914.2-2000 | 机车司机室前窗、侧窗及其他窗的配置 | Position of front and side windows and other windows for driver's cabs of locomotives | |
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
国際整合 |
| 29.060.10 | K12 | GB/T 6108.1-1985 | 绕组线导体 第1部分:一般规定 | Conductors for winding wires - Part 1: General | EQV IEC 60182-1-3-77 |
| 29.060.10 | K12 | GB/T 6108.2-1985 | 绕组线导体 第2部分:圆线的尺寸 | Conductors for winding wires - Part 2: Dimensions of round conductors | EQV IEC 60182-1-77 |
| 29.060.10 | K12 | GB/T 6108.3-1985 | 绕组线导体 第3部分:扁线的尺寸 | Conductors for winding wires - Part 3: Dimensions of rectangular conductors | EQV IEC 60182-3-72 |
| 29.060.10 | K12 | GB/T 6109.1-1990 | 漆包圆绕组线 第一部分: 一般规定 | Enamelled round winding wires - Part 1: General | EQV IEC 60317-88 |
| 29.060.10 | K12 | GB/T 6109.2-1990 | 漆包圆绕组线 第二部分: 155 级改性聚酯漆包铜圆线 | Enamelled round winding wires - Part 2: Modified polyester enamelled round copper wires, class 155 | EQV IEC 60317-3-88 |
| 29.060.10 | K12 | GB/T 6109.3-1985 | 漆包圆绕组线 第三部分: 高强度缩醛漆包圆铜线 | Enamelled round winding wires--Part 3: Polyvinyl-formal enamelled round copper wires with high mechanical properties | EQV IEC 60317-1-78 |
| 29.060.10 | K12 | GB/T 6109.4-1988 | 漆包圆绕组线 第4 部分: 直焊性聚氨酯漆包圆铜线 | Enamelled round winding wires--Part 4: Self-fiuxing polyurethane enamelled round copper wires | |
| 29.060.10 | K12 | GB/T 6109.5-1988 | 漆包圆绕组线 第5部分: 温度指数180的聚酯亚胺漆包圆铜线 | Enamelled round winding wires--Part 5: Polyesterimide enamelled round copper wires with a temperature index of 180 | |
| 29.060.10 | K12 | GB/T 6109.6-1988 | 漆包圆绕组线 第6部分: 温度指数220的聚酰亚胺漆包圆铜线 | Enamelled round winding wires--Part 6: Polyimide enamelled round copper wires with a temperature index of 220 | |
| 29.060.10 | K12 | GB/T 6109.7-1990 | 漆包圆绕组线 第七部分: 130 级聚酯漆包铜圆线 | Enamelled round winding wires - Part 7: Polyester enamelled round copper wires, class 130 | EQV IEC 60317-34-88 |
| 29.060.10 | K12 | GB/T 6109.8-1989 | 漆包圆绕组线 第八部分: 热粘合或溶剂粘合聚酯漆包圆铜线 | Enamelled round winding wires - Part 8: Heat or solvent bonding polyester enamelled round copper wires | |
| 29.060.10 | K12 | GB/T 6109.9-1989 | 漆包圆绕组线 第九部分: 热粘合或溶剂粘合直焊性聚氨酯漆包圆铜线 | Enamelled round winding wires - Part 9: Heat or solvent bonding solderable polyurethane enamelled round copper wires | |
| 29.060.10 | K12 | GB/T 6109.10-1990 | 漆包圆绕组线 第十部分: 180级聚酯亚胺/聚酰胺复合漆包铜圆线 | Enamelled round winding wires - Part 10: Polyester(imide) enamelled round copper wires overcoated with polyamide, class 180 | EQV IEC 60317-22-88 |
| 29.060.10 | K12 | GB/T 6109.11-1990 | 漆包圆绕组线 第十一部分: 200级聚酯亚胺/聚酰胺酰亚胺复合漆包铜圆线 | Enamelled round winding wires - Part 11: Polyester(imide) enamelled round copper wires overcoated with polyamide-imide, class 200 | EQV IEC 60317-13-88 |
| 29.040 | Q50 | GB/T 6154-1985 | 炭素材料体积密度测定方法 | Carbon materials--Determination of the bulk density | NEQ ASTM C559-77 |
| 29.040 | Q50 | GB/T 6155-1985 | 炭素材料真密度测定方法 | Carbon materials--Determination of the true density | EQV ISO/DIS 8004 |
| 29.040 | Q50 | GB/T 6156-1985 | 炭素材料真气孔率测定方法 | Carbon materials--Determination of the true porosity | NEQ JIS R7212 |
| 29.180 | K41 | GB 6450-1986 | 干式电力变压器 | Dry-type power transformers | EQV IEC 60726-82 |
| 29.180 | K41 | GB/T 6451-1999 | 三相油浸式电力变压器技术参数和要求 | Specification and technical requirements for three-phase oil-immersed power transformers | |
| 29.220.99 | K83 | GB/T 6495.1-1996 | 光伏器件 第1部分: 光伏电流－电压特性的测量 | Photovoltaic devices--Part 1: Measurement of photovoltaic current-voltage characteristics | IDT IEC 60904-1-1987 |
| 29.220.99 | K83 | GB/T 6495.2-1996 | 光伏器件 第2部分: 标准太阳电池的要求 | Photovoltaic devices--Part 2: Requirements for reference solar cells | IDT IEC 60904-2-1989 |
| 29.220.99 | K83 | GB/T 6495.3-1996 | 光伏器件 第3部分: 地面用光伏器件的测量原理及标准光谱辐照度数据 | Photovoltaic devices--Part 3: Measurement principles for terrestrial photovoltaic(PV) solar devices with reference spectral irradiance data | IDT IEC 60904-3-1989 |
| 29.220.99 | K83 | GB/T 6495.4-1996 | 晶体硅光伏器件的I－V实测特性的温度和辐照度修正方法 | Procedures for temperature and irradiance corrections to measured I-V characteristics of crystalline silicon photovoltaic devices | IDT IEC 60891-1987 |
| 29.220.01 | K83 | GB/T 6495.5-1997 | 光伏器件 第5部分: 用开路电压法确定光伏(PV)器件的等效电池温度(ECT) | Photovoltaic devices-Part 5: Determination of the equivalent cell temperature(ECT) of photovoltaic (PV)devices by the open-circuit voltage method | IDT IEC 60904-5:1993 |
| 29.040.20 | K15 | GB/T 6553-1986 | 评定在严酷环境条件下使用的电气绝缘材料耐漏电起痕性和耐电蚀损的试验方法 | Test methods for evaluating resistance to tracking and erosion of electrical insulating materials used under severe ambient conditions | NEQ IEC 60587-84 |
| 29.040.20 | K15 | GB/T 6554-1986 | 电气绝缘涂敷粉末试验方法 | Test methods for coating powders for electrical insulation | NEQ IEC 60455-2-2-84 |
| 29.040.30 | H21 | GB/T 6616-1995 | 半导体硅片电阻率及硅薄膜薄层电阻测定 非接触涡流法 | Test method for measuring resistivity of semiconductor silicon or sheet resistance of semiconductor films with a noncontact eddy-current gage | EQV ASTM F673-90 |
| 29.040.30 | H21 | GB/T 6617-1995 | 硅片电阻率测定 扩展电阻探针法 | Test method for measuring resistivity of silicon wafers using spreading resistance probe | EQV ASTM F673-90 |
| 29.040.30 | H21 | GB/T 6618-1995 | 硅片厚度和总厚度变化测试方法 | Test method for thickness and total thickness variation of silicon slices | EQV ASTM F533-90 |
| 29.040.30 | H21 | GB/T 6619-1995 | 硅片弯曲度测试方法 | Test methods for bow of silicon slices | EQV ASTM 534-91 |
| 29.040.30 | H21 | GB/T 6620-1995 | 硅片翘曲度非接触式测试方法 | Test method for measuring warp on silicon slices by noncontact scanning | EQV ASTM F657-91 |
| 29.040.30 | H21 | GB/T 6621-1995 | 硅抛光片表面平整度测试方法 | Test methods for surface flatness of silicon polished slices | EQV ASTM F775-88 |
| 29.040.30 | H21 | GB/T 6624-1995 | 硅抛光片表面质量目测检验方法 | Standard method for measuring the surface quality of polished silicon slices by visual inspection | EQV ASTM F523-88 |
| 29.040.30 | L21 | GB/T 6627-1986 | 人造石英晶体棒材型号命名方法 | Designations for lumbered synthetic quartz crystals | |
| 29.040 | Q50 | GB/T 6717-1986 | 炭素材料电阻率测定方法 | Method for determination of specific resistance of carbon materials | NEQ ASTM C611-82 |
| 29.280 | S41 | GB 6771-2000 | 电力机车防火和消防措施的规程 | Regulations relating to fire preventive and fighting measures for electric locomotives | EQV UIC 617-1 OR:1979 |
| 29.120.50 | K31 | GB 6829-1995 | 剩余电流动作保护器的一般要求 | General requirements for residual current operated protective devices | EQV IEC 60755 |
| 29.120.70 | S61 | GB/T 6902-2001 | 铁路信号继电器试验方法 | Testing methods for railway signal relays | |
| 29.280 | K63 | GB/T 6927-1986 | 电动力制动和电磁制动系统的特性和试验 | Characteristics and tests of electrodynamic and electromagnetic braking systems | NEQ IEC 60631-78 |
| 29.020 | K04 | GB/T 6988.1-1997 | 电气技术用文件的编制 第1部分: 一般要求 | Preparation of documents used in electrotechnology--Part 1: General requirements | IDT IEC 61082-1:1991 |
| 29.020 | K04 | GB/T 6988.2-1997 | 电气技术用文件的编制 第2部分: 功能性简图 | Preparation of documents used in electrotechnology-Part 2: Function-oriented diagrams | IDT IEC 61082-2:1993 |
| 29.020 | K04 | GB/T 6988.6-1993 | 控制系统功能表图的绘制 | Preparation of function charts for control systems | EQV IEC 60848-88 |
| 29.060 | K10 | GB 6995.1-1986 | 电线电缆识别标志 第一部分:一般规定 | Markings for electric cables and wires--Part 1: General requirements | NEQ IEC 60304-82 |
| 29.060 | K10 | GB 6995.2-1986 | 电线电缆识别标志 第二部分:标准颜色 | Markings for electric cables and wires--Part 2: Standard colours | NEQ IEC 60304-82 |
| 29.060 | K10 | GB 6995.3-1986 | 电线电缆识别标志 第三部分: 电线电缆认别标志 | Markings for electric cables and wires--Part 3: Identifications of cables and wires | NEQ IEC 60227-79 |
| 29.060 | K10 | GB 6995.4-1986 | 电线电缆识别标志 第四部分: 电气装备电线电缆绝缘线芯识别标志 | Markings for electric cables and wires--Part 4: Identifications of insulated conductors of cables and wires for electrical appliances and equipments | NEQ IEC 60304-82 |
| 29.060 | K10 | GB 6995.5-1986 | 电线电缆识别标志 第五部分: 电力电缆绝缘线芯识别标志 | Markings for electric cables and wires--Part 5: Identifications of insulated cores of power cables | NEQ BS 6480 |
| 29.140.10 | K74 | GB/T 6997-2001 | 插脚式灯头的量规 | Gauges of pin lamp caps | EQV IEC 60061-3:1999 |
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
国際整合 |
| 29.140.01 | K72 | GB 7000.1-1996 | 灯具一般安全要求与试验 | General safety requirements and tests for luminaires | IDT IEC 60598-1-1992 |
| 29.140.01 | K72 | GB 7000.2-1996 | 应急照明灯具安全要求 | Safety requirements of luminaires for emergency lighting | IDT IEC 60598-2-22-1990 |
| 29.140.01 | K72 | GB 7000.3-1996 | 庭园用的可移式灯具安全要求 | Safety requirements of portable luminaires for garden use | IDT IEC 60598-2-7-1982 |
| 29.140.01 | K72 | GB 7000.4-1996 | 儿童感兴趣的可移式灯具安全要求 | Safety requirements of portable child-appealing luminaires | IDT IEC 60598-2-10-1987 |
| 29.140.01 | K72 | GB 7000.5-1996 | 道路与街路照明灯具的安全要求 | Safety requirements of luminaires for road and street lighting | IDT IEC 60598-2-3-1993 |
| 29.140.01 | K72 | GB 7000.6-1996 | 内装变压器的钨丝灯灯具的安全要求 | Safcty requirements of luminaires with built-in transformers for filaments lamps | IDT IEC 60598-2-6-1994 |
| 29.140.01 | K70 | GB 7000.7-1997 | 投光灯具安全要求 | Safety requirements for floodlights | IDT IEC 60598-2-5:1979 |
| 29.140.01 | Y09 | GB 7000.8-1997 | 游泳池和类似场所用灯具安全要求 | Safety requirements of luminaires for swimming pools and similar applications | IDT IEC 60598-2-18:1993 |
| 29.140.01 | K70 | GB 7000.9-1998 | 灯串安全要求 | Safety requirements for lighting chains | IDT IEC 60598-2-20:1996 |
| 29.140.01 | K72 | GB 7000.10-1999 | 固定式通用灯具安全要求 | Safety requirements for fixed general purpose luminaires | IDT IEC 60598-2-1:1979 |
| 29.140.01 | K72 | GB 7000.11-1999 | 可移式通用灯具安全要求 | Safety requirements for portable general purpose luminaires | IDT IEC 60598-2-4:1997 |
| 29.140.01 | K72 | GB 7000.12-1999 | 嵌入式灯具安全要求 | Safety requirements for recessed luminaires | IDT IEC 60598-2-2:1997 |
| 29.140.10 | K72 | GB 7000.13-1999 | 手提灯安全要求 | Safety requirements for handlamps | IDT IEC 60598-2-8:1996 |
| 29.140.01 | K72 | GB 7000.14-2000 | 通风式灯具安全要求 | Safety requirements for air-handling luminaires | IDT IEC 60598-2-19:1981 |
| 29.140.01 | K72 | GB 7000.15-2000 | 舞台灯光、电视、电影及摄影场所（室内外）用灯具安全要求 | Safety requirements of luminaires for stage lighting, television, film and photographic studios (outdoor and indoor) | IDT IEC 60598-2-17:1984 |
| 29.140.01 | K72 | GB 7000.16-2000 | 医院和康复大楼 诊所用灯具安全要求 | Safety requirements for luminaires used in clinical areas of hospitals and health care buildings | IDT IEC 60598-2-25:1994 |
| 29.140 | K72 | GB/T 7002-1986 | 投光照明灯具光度测试 | Photometry for floodlight | |
| 29.160;
47. |
K26 | GB/T 7060-1994 | 船用旋转电机基本技术要求 | General specificatoins for rotary electrical machines in ships | |
| 29.160.20 | K21 | GB/T 7064-1996 | 透平型同步电机技术要求 | Requirements for turbine type synchronous machine | NEQ IEC 60034-3-1988 |
| 29.060.10 | K13 | GB/T 7095.1-1995 | 漆包扁绕组线 第1部分 一般规定 | Enamelled rectangular wires Part 1: General | EQV IEC 60317-0-2-1990 |
| 29.060.10 | K13 | GB/T 7095.2-1995 | 漆包扁绕组线 第2部分 120级缩醛漆包铜扁铜线 | Enamelled rectangular wires Part 2--Polyvinyl-acetal enamelled rectangular copper wires, class 120 | EQV IEC 60317-18-1990 |
| 29.060.10 | K13 | GB/T 7095.3-1995 | 漆包扁绕组线 第3部分 155级改性聚酯漆包铜扁线 | Enamelled rectangular wires Part 3--Modified polyester enamelled rectangular copper wires,class 155 | EQV IEC 60317-16-1990 |
| 29.060.10 | K13 | GB/T 7095.4-1995 | 漆包扁绕组线 第4部分 180级聚酯亚胺漆包铜扁线 | Enamelled rectangular wires Part 4--Polyesterimide enamelled rectangular copper wires,class 180 | EQV IEC 60317-28-1990 |
| 29.060.10 | K13 | GB/T 7095.5-1995 | 漆包扁绕组线 第5部分 220级聚酰亚胺漆包铜扁线 | Enamelled rectangular wires Part 5--Polyimide enamelled rectangular copper wires, class 220 | EQV IEC 60317-30-1990 |
| 29.060.10? | K13 | GB/T 7095.6-1995 | 漆包扁绕组线 第6部分 200级聚酯亚胺/聚酰胺酰亚胺复合漆包铜扁线 | Enamelled rectangular wires Part 6--Polyester (imide) overcoated with polyamide-imide enamelled rectangular copper wires, class 200 | EQV IEC 60317-29-1990 |
| 29.060.10? | K13 | GB/T 7095.7-1995 | 漆包扁绕组线 第7部分 130级聚酯漆包铜扁线 | Enamelled rectangular wires Part 7--Polyester enamelled rectangular copper wires, class 130 | |
| 29.220.10 | K84 | GB/T 7112-1998 | R03、R1、R6、R14、R20型锌-锰干电池 LR03、LR1、LR6、LR14、LR20型碱性锌-锰干电池 | Zinc-manganese dry batteries of R03,R1,R6,R14 and R20 Alkaline zinc-manganese dry batteries of LR03,LR1,LR6,LR14 and LR20 | EQV IEC 60086-2:1997 |
| 29.080.20 | K15 | GB/T 7113-1986 | 电气绝缘漆管一般要求 | General requirements for electrical insulating coated textile sleeving | NEQ IEC 60684-1-80 |
| 29.080.20 | K15 | GB/T 7114-1986 | 电器绝缘漆管试验方法 | Test methods for electrical insulating coated textile sleeving | NEQ IEC 60684-2-83 |
| 29.020 | K04 | GB/T 7159-1987 | 电气技术中的文字符号制订通则 | General rules for the formulation of letter symbols in electrotechnology | NEQ IEC 60204-2-84 |
| 29.220 | Y44 | GB/T 7168-1996 | 锌银扣式电池 | Zine-silver button cells | |
| 29.220.30 | K80 | GB/T 7169-1987 | 碱性蓄电池型号命名方法 | Designation of alkaline secondary cell | |
| 29.040.20 | K10 | GB/T 7195-1987 | 云母纸试验方法 | Test methods of mica papers | NEQ IEC TC 15/ SC15C(CO)203-85:FDIS |
| 29.040.20 | K10 | GB/T 7196-1987 | 用液体萃取测定电气绝缘材料离子杂质的试验方法 | Methods of test for the determination of ionic impurities in electrical insulating materials by extraction with liquids | EQV IEC 60589-77 |
| 29.200 | K01 | GB 7228-1987 | 电解整流设备的整流效率及其供电对象的电能利用率测算方法 | Measuring and calculating method on efficiency of rectifiers and their consumers energy-conversion efficiency in electro-chemical industry | |
| 29.140 | K70 | GB 7248-1987 | 电光源的安全要求 | Safety requirements of electrical light source | |
| 29.140 | K70 | GB/T 7249-1987 | 普通照明灯泡的最大外形尺寸 | Maximum lamp outlines for general lighting lamps | NEQ IEC 60630-79 |
| 29.120.60 | K31 | GB 7251.1-1997 | 低压成套开关设备和控制设备 第一部分: 型式试验和部分型式试验成套设备 | Low-voltage switchgear and controlgear assemblies--Part 1: Type-tested and partially type-tested assemblies | IDT IEC 60439-1:1992 |
| 29.120.60 | K31 | GB 7251.2-1997 | 低压成套开关设备和控制设备 第二部分: 对母线干线系统(母线槽)的特殊要求 | Low-voltage switchgear and controlgear assemblies--Part 2: Particular requirements for busbar trunking systems(busways) | IDT IEC 60439-2:1987 |
| 29.120.60 | K31 | GB 7251.3-1997 | 低压成套开关设备和控制设备 第三部分: 对非专业人员可进入场地的低压成套开关设备和控制设备--配电板的特殊要求 | Low-voltage switchgear and controlgear assemblies Part 3: Particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access for their use--Distribution boards | IDT IEC 60439-3:1990 |
| 29.120.60 | K31 | GB 7251.4-1998 | 低压成套开关设备和控制设备 第四部分: 对建筑工地用成套设备(ACS)的特殊要求 | Low-voltage switchgear and controlgear assemblies Part 4: Particular requirements for assemblies for construction sites(ACS) | IDT IEC 60439-4:1990 |
| 29.120.60 | K31 | GB 7251.5-1998 | 低压成套开关设备和控制设备 第五部分: 对户外公共场所的成套设备 动力配电网用电缆分线箱(CDCs)的特殊要求 | Low-voltage switchgear and controlgear assemblies Part 5: Particular requirements for assemblies intended to be installed outdoors in public places--Cable distribution cabinets (CDCs)for power distribution in networks | IDT IEC 60439-5:1996 |
| 29.080.10 | K50 | GB/T 7253-1987 | 盘形悬式绝缘子串元件尺寸与特性 | The string insulator units of the cap and pin type--Dimensions and characteristics | NEQ IEC 60305-78 |
| 29.140 | K73 | GB 7256.1-1987 | 民用机场灯具技术条件 通用要求 | Specifications for airport light fixtures--General requirements | |
| 29.220 | K85 | GB/T 7260-1987 | 不间断电源设备 | Uninterruptible power systems | NEQ IEC TC 22/SC 22B (C0)44:FDIS |
| 29.120.70 | K45 | GB/T 7261-2000 | 继电器及装置基本试验方法 | Basic testing method for relay and equipment | |
| 29.020 | K05 | GB/T 7266-1987 | 电力系统二次回路电气控制台基本尺寸 | Basic dimensions of electrical console for secondary circuit of power system | |
| 29.020 | K05 | GB/T 7267-1987 | 电力系统二次回路控制、保护屏及柜基本尺寸系列 | Series of basic dimensions of control and protective panels and cabinet for secondary circuit of power system | |
| 29.020 | K05 | GB/T 7268-1987 | 电力系统二次回路控制、保护装置用插箱及插件面板基本尺寸系列 | Series of basic dimensions of subracks and associated panels of plugin units for control and protective equipment of secondary circuit of power system | |
| 29.020 | L89 | GB/T 7269-1987 | 电子设备控制台的布局、型式和基本尺寸 | Arrangement, types and basic dimensions for electronic equipment consoles | |
| 29.160.30 | K24 | GB/T 7344-1997 | 交流伺服电动机通用技术条件 | General specification for A.C servomotors | |
| 29.160 | L33 | GB/T 7345-1994 | 控制微电机基本技术要求 | General requirements for electrical micro machine for automatic control system | NEQ GOST 16264.10-85 |
| 29.160.01 | L33 | GB/T 7346-1998 | 控制电机基本外形结构型式 | Basic outline constructional type for control motors and feedback components | |
| 29.020 | K04 | GB/T 7356-1987 | 电气系统说明书用简图的编制 | Preparation of diagrams for electrical system manuals | |
| 29.220.20 | K84 | GB/T 7403.1-1996 | 牵引用铅酸蓄电池 | Lead-acid traction batteries | NEQ IEC 60254-1-1983 |
| 29.220.20 | K84 | GB/T 7403.2-1987 | 牵引用铅酸蓄电池 产品品种和规格 | Lead-acid traction batteries--Product types and specifications | EQV IEC 60254-2-73 |
| 29.220.20 | K84 | GB/T 7404.1-2000 | 内燃机车用排气式铅酸蓄电池 | Vented lead--acid batteries for diesel locomotives | |
| 29.220.20 | K84 | GB/T 7404.2-2000 | 内燃机车用阀控密封式铅酸蓄电池 | Vavle regulated lead-acid batteries for diesel locomotives | |
| 29.160.20 | A13 | GB/T 7408-1994 | 数据元和交换格式 信息交换 日期和时间表示法 | Data elements and interchance foemats--Information interchange--Representation of tates and times | EQV ISO 8601-88 |
| 29.160.20 | K21 | GB/T 7409.1-1997 | 同步电机励磁系统 定义 | Excitation system for synchronous electrical machines--Definitions | IDT IEC 60034-16-1:1991 |
| 29.160.20 | K21 | GB/T 7409.2-1997 | 同步电机励磁系统 电力系统研究用模型 | Excitation system for synchronous electrical machines--Model for power system studies | IDT IEC 60034-16-2:1991 |
| 29.160.20 | K21 | GB/T 7409.3-1997 | 同步电机励磁系统 大、中型同步发电机励磁系统技术要求 | Excitation system for synchronous electrical machines--Technical requirements excitation system for large and medium synchronous generators | |
| 29.120.70 | K33 | GB/T 7417-2001 | AX系列继电器 | AX Series relays | |
| 29.180 | K04 | GB/T 7449-1987 | 电力变压器和电抗器的雷电冲击和操作冲击试验导则 | Guide to the lightning impulse and switching impulse testing of power transformers and reactors | EQV IEC 60722-82 |
| 29.140 | K70 | GB/T 7451-1987 | 电光源名词 | Electric light source vocabulary | |
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
国際整合 |
| 29.080 | K13 | GB/T 7594.1-1987 | 电线电缆橡皮绝缘和橡皮护套 第1部分:一般规定 | Rubber insulation and sheath of electric cables and wires--Part 1: General | NEQ IEC 60245 |
| 29.080 | K13 | GB/T 7594.2-1987 | 电线电缆橡皮绝缘和橡皮护套 第2部分:65℃橡皮绝缘 | Rubber insulation and sheath of electric cables and wires--Part 2: Rubber insulation 65℃ | NEQ IEC 60245 |
| 29.080 | K13 | GB/T 7594.3-1987 | 电线电缆橡皮绝缘和橡皮护套 第3部分:70℃橡皮绝缘 | Rubber insulation and sheath of electric cables and wires--Part 3: Rubber insulation 70℃ | NEQ IEC 60245 |
| 29.080 | K13 | GB/T 7594.4-1987 | 电线电缆橡皮绝缘和橡皮护套 第4部分:65℃一般橡皮护套 | Rubber insulation and sheath of electric cables and wires--Part 4: Ordinary duty rubber sheath 65℃ | NEQ IEC 60245 |
| 29.080 | K13 | GB/T 7594.5-1987 | 电线电缆橡皮绝缘和橡皮护套 第5部分:65℃一般不延燃橡皮护套 | Rubber insulation and sheath of electric cables and wires--Part 5: Ordinary duty flame-retardant rubber sheath 65℃ | NEQ IEC 60245 |
| 29.080 | K13 | GB/T 7594.6-1987 | 电线电缆橡皮绝缘和橡皮护套 第6部分:65℃重型橡皮护套 | Rubber insulation and sheath of electric cables and wires--Part 6: Heavy duty rubber sheath 65℃ | NEQ IEC 60245 |
| 29.080 | K13 | GB/T 7594.7-1987 | 电线电缆橡皮绝缘和橡皮护套 第7部分:65℃重型不延燃橡皮护套 | Rubber insulation and sheath of electric cables and wires--Part 7: Heavy duty flame-retardant rubber sheath 65℃ | NEQ IEC 60245 |
| 29.080 | K13 | GB/T 7594.8-1987 | 电线电缆橡皮绝缘和橡皮护套 第8部分:90℃橡皮绝缘 | Rubber insulation and sheath of electric cables and wires--Part 8: Rubber sheath 90℃ | NEQ IEC 60245 |
| 29.080 | K13 | GB/T 7594.9-1987 | 电线电缆橡皮绝缘和橡皮护套 第9部分:85℃一般不延燃橡皮护套 | Rubber insulation and sheath of electric cables and wires--Part 9: Ordinary duty flame-retardant rubber sheath 85℃ | NEQ IEC 60245 |
| 29.080 | K13 | GB/T 7594.10-1987 | 电线电缆橡皮绝缘和橡皮护套 第10部分: 90℃一般不延燃橡皮护套 | Rubber insulation and sheath of electric cables and wires--Part 10: Ordinary duty flame-retardant rubber sheath 90℃ | NEQ IEC 60245 |
| 29.080 | K13 | GB/T 7594.11-1987 | 电线电缆橡皮绝缘和橡皮护套 第11部分: 180℃ 橡皮绝缘或护套 | Rubber insulation and sheath of electric cables and wires--Part 11: Rubber insulation or sheath 180℃ | NEQ IEC 60245 |
| 29.040.20 | E38 | GB/T 7603-1987 | 矿物绝缘油中芳碳含量测定法 (红外光谱分析法) | Determination of the aromatic carbon content in mineral insulating oils by infrared spectrum method | |
| 29.040.20 | E38 | GB/T 7604-1987 | 矿物绝缘油芳烃含量测定法 | Determination of the aromatic hydrocarbon content in mineral insulating oils | |
| 29.060.10 | K12 | GB/T 7672.1-1987 | 玻璃丝包绕组线 第一部分: 一般规定 | Glass-fiber covered winding wires--Part 1: General | NEQ DIN 46434-80 |
| 29.060.10 | K12 | GB/T 7672.2-1987 | 玻璃丝包绕组线 第二部分: 双玻璃丝包圆线 | Glass-fiber covered winding wires--Part 2: Double glass-fiber covered round wires | NEQ DIN 46434-80 |
| 29.060.10 | K12 | GB/T 7672.3-1987 | 玻璃丝包绕组线 第三部分: 单玻璃丝包漆包圆线 | Glass-fiber covered winding wires--Part 3: Single glass-fiber covered enamelled round wires | NEQ DIN 46434-80 |
| 29.060.10 | K12 | GB/T 7672.4-1987 | 玻璃丝包绕组线 第四部分: 双玻璃丝包扁线 | Glass-fiber covered winding wires--Part 4: Double glass-fiber covered rectangular wires | NEQ DIN 46434-80 |
| 29.060.10 | K12 | GB/T 7672.5-1987 | 玻璃丝包绕组线 第五部分: 玻璃丝包漆包扁线 | Glass-fiber covered winding wires--Part 5: Glass-fiber covered enamelled rectangular wires | NEQ DIN 46434-80 |
| 29.060.10 | K12 | GB/T 7672.6-1987 | 玻璃丝包绕组线 第六部分: 玻璃丝包薄膜绕包扁线 | Glass-fiber covered winding wires--Part 6: Glass-fiber covered film covered rectangular wires | EQV DIN 46434-80 |
| 29.060.10 | K12 | GB/T 7673.1-1987 | 纸包绕组线 第一部分: 一般规定 | Paper covered wires--Part 1: General | EQV ΓOCT 16512-80 |
| 29.060.10 | K12 | GB/T 7673.2-1987 | 纸包绕组线 第二部分: 纸包圆线 | Paper covered wires--Part 2: Paper covered round wires | EQV ΓOCT 16512-80 |
| 29.060.10 | K12 | GB/T 7673.3-1987 | 纸包绕组线 第三部分: 纸包扁线 | Paper covered wires--Part 3: Paper covered rectangular wires | EQV ΓOCT 16512-80 |
| 29.120.60 | K43 | GB 7674-1997 | 72.5kV及以上气体绝缘金属封闭开关设备 | Gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above | EQV IEC 60517:1990 |
| 29.200 | K46 | GB/T 7677-1987 | 半导体直接直流变流器 | Semiconductor direct d.c. convertors | EQV IEC 60146-3-77 |
| 29.200 | K46 | GB/T 7678-1987 | 半导体自换相变流器 | Semiconductor self-commutated convertors | EQV IEC 60146-2-77 |
| 29.040.20 | G38 | GB/T 7752-1987 | 绝缘胶粘带工频击穿强度试验方法 | Test method for electric strength of insulating adhesive tape at power frequency | |
| 29.040.20 | G38 | GB/T 7753-1987 | 压敏胶粘带拉伸性能试验方法 | Test method for tensile properties of pressure sensitive adhesive tapes | |
| 29.040.20 | G38 | GB/T 7754-1987 | 压敏胶粘带剪切强度试验方法 (胶面对背面) | Test method for shear strength of pressure sensitive adhesive tapes (adhesive layer to back side of the tape) | |
| 29.160.20 | K21 | GB/T 7894-2001 | 水轮发电机基本技术条件 | Fundamental technical specifications for hydro generators | |
| 29.020 | K09 | GB 7946-1987 | 带电铁丝网和电围栏的安装和安全运用 | Installation and safe operation of electrically energized entanglements and electric fences | |
| 29.020 | K09 | GB 7947-1997 | 导体的颜色或数字标识 | Identification of conductors by colours or numerals | IDT IEC 60446:1989 |
| 29.260.20 | K35 | GB 7958-2000 | 煤矿用电容式发爆器 | Capacitor discharge type exploders for coal mines | |
| 29.040.20 | Y32 | GB 7969-1987 | 电力电缆纸 | Electric power cable paper | NEQ IEC 60554-79 |
| 29.040.20 | Y32 | GB 7971-1987 | 半导电电缆纸 | Semiconducting electric cable paper | NEQ ΓOCT 10751-74 |
| 29.040.20 | Y30 | GB/T 7976-1987 | 绝缘纸和纸板 水抽提液电导率的测定 | Insulating paper and board--Determination of the electrical conductivity for the water extract | NEQ ISO 554/2-76 |
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
国際整合 |
| 29.160.30 | K24 | GB/T 8128-1987 | 单相串励电动机 试验方法 | Test procedure for single phase A.C.series motor | NEQ IEC 60034-1-83 |
| 29.240.10 | K41 | GB 8286-1996 | 矿用隔爆型移动变电站 | Mining flameproof movable substations | |
| 29.080.10 | K48 | GB 8287.1-1998 | 高压支柱瓷绝缘子 第1部分: 技术条件 | High voltage post insulators of ceramic material Part 1: Technical specification | NEQ IEC 60168-1994 |
| 29.080.10 | K48 | GB/T 8287.2-1999 | 高压支柱瓷绝缘子 第2部分：尺寸与特性 | High voltage post insulators of ceramic material--Part 2: Dimensions and characteristics | NEQ IEC 60273:1990 |
| 29.100.20 | K14 | GB/T 8320-1987 | 铜钨及银钨电触头技术条件 | Technical specification for copper-tungsten and silver-tungsten electrical contacts | NEQ ΓOCT 13333-75 |
| 29.060.10 | K11 | GB/T 8349-2000 | 金属封闭母线 | Metal-enclosed bus | |
| 29.120.70 | K45 | GB/T 8367-1987 | 量度继电器直流辅助激励量的中断与交流分量 (纹波) | Interruptions to and alternating component (ripple) in d.c. auxiliary energizing quantity of measuring relays | EQV IEC 60255-11-80 |
| 29.040.20 | K50 | GB/T 8411.1-1987 | 电瓷材料 第一部分:定义、分类和性能 | Porcelain insulating material for electrical applications--Part 1:Definition,classification and properties | NEQ IEC 60672-1-3-84 |
| 29.040.20 | K50 | GB/T 8411.2-1987 | 电瓷材料 第二部分:试验方法 | Porcelain insulating material for electrical applications--Part 2:Test methods | NEQ IEC 60672-2-80 |
| 29.020 | K04 | GB/T 8445-1987 | 有关电路和磁路的规定 | Conventions concerning electric and magnetic circuits | NEQ IEC 60375-72 |
| 29.180 | L17 | GB/T 8554-1998 | 电子和通信设备用变压器和电感器 测量方法及试验程序 | Transformers and inductors for use in electronic and telecommunication equipment Measuring methods and test procedures | IDT IEC 61007:1994 |
| 29.045 | H81 | GB/T 8646-1998 | 半导体键合铝--1%硅细丝 | Fine aluminum-1% silicon wire for semiconductor lend-bonding | NEQ ASTM F487-88 |
| 29.040 | Q50 | GB/T 8718-1988 | 炭素材料术语 | The terms of carbon materials | |
| 29.050 | Q50 | GB/T 8719-1997 | 炭素材料及其制品的包装、标志、储存、运输和质量证明书的一般规定 | General rule for packing, marking, storage, transport and quality certificates of carbonaceous material and products | |
| 29.040 | Q52 | GB/T 8721-1988 | 炭素材料抗拉强度测定方法 | Method for the determination of tensile strength of carbonaceous materials | NEQ ASTM 749-73 |
| 29.040 | Q51 | GB/T 8722-1988 | 石墨材料中温导热系数测定方法 | Method for the determination of thermal conductivity of graphite materials at median temperature | |
| 29.045 | H68 | GB/T 8750-1997 | 半导体器件键合金丝 | Gold wire for semiconductor devices lead bonding | EQV ASTM F72:1994 |
| 29.120.40 | K32 | GB 8871-2001 | 交流接触器节电器 | Eenergy saver for AC contactors | |
| 29.220.10 | K82 | GB/T 8897-1996 | 原电池总则 | Primary batteries:General | EQV IEC 60086-1-1993 |
| 29.020 | K43 | GB/T 8905-1996 | 六氟化硫电气设备中气体管理和检测导则 | The guide for processing and measuring SF6 gas in power apparatus | NEQ IEC 60480-1974 |
| 29.160.30 | K22 | GB/T 8916-1988 | 三相异步电动机负载率现场测试方法 | Test procedure on working site for measuring the loading percentage of a three phase induction motor | |
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
国際整合 |
| 29.040.20 | W43 | GB/T 9072-1988 | 绝缘纺 | Silk fabric for electric insulation | |
| 29.120.70 | S61 | GB/T 9080-1988 | 铁路信号直流无极继电器 通用技术条件 | General technical requirements for railway signal DC neutral relays | EQV UIC 7361-74 |
| 29.260.10 | K09 | GB/T 9089.1-1988 | 严酷条件下户外场所电气设施 术语和定义 | Electrical installations for outdoor sites under heavy conditions--Terms and definitions | NEQ IEC 60621-1-87 |
| 29.260.10 | K09 | GB/T 9089.2-1988 | 严酷条件下户外场所电气设施 一般防护要求 | Electrical installations for outdoor sites under heavy conditions--General protection requirements | NEQ IEC 60621-2-86 |
| 29.260.10 | K09 | GB/T 9089.3-1991 | 户外严酷条件下电气装置 设备及附件的一般要求 | Electrical installations for outdoor sites under heavy conditions - General requirements for eguipment and ancillaries | NEQ IEC 60621-3 |
| 29.260.10 | K09 | GB/T 9089.4-1992 | 户外严酷条件下电气装置 装置要求 | Electrical installations for outdoor sites under heavy conditions - Repuirements for the installation | EQV IEC 60621-4-81 |
| 29.260.10? | K09 | GB 9089.5-1995 | 户外严酷条件下电气装置操作要求 | Electrical installations for outdoor sites under heavy conditions--Operating requirements | EQV IEC 60621-5-1987 |
| 29.060.20 | K13 | GB 9326.1-1988 | 交流330kV 及以下油纸绝缘自容式充油电缆及附件 一般规定 | Oil-filled paper-insulated cables and accessories for alternating voltages up to and including 330kV--General | |
| 29.060.20 | K13 | GB 9326.2-1988 | 交流330kV 及以下油纸绝缘自容式充油电缆及附件 油纸绝缘自容式充油电缆 | Oil-filled paper-insulated cables and accessories for alternating voltages up to and including 330kV--Oil filled paper insulated cables | |
| 29.060.20 | K13 | GB 9326.3-1988 | 交流330kV 及以下油纸绝缘自容式充油电缆及附件 终端 | Oil-filled paper-insulated cables and accessories for alternating voltages up to and including 330kV--Sealing ends | |
| 29.060.20 | K13 | GB 9326.4-1988 | 交流330kV及以下油纸绝缘自容式充油电缆及附件 接头 | Oil-filled paper-insulated cables and accessories for alternating voltages up to and including 330kV--Joints | |
| 29.060.20 | K13 | GB 9326.5-1988 | 交流330kV 及以下油纸绝缘自容式充油电缆及附件 压力供油箱 | Oil-filled paper-insulated cables and accessories for alternating voltages up to and inclnding 330kV--Pressure tanks | |
| 29.060.20 | K13 | GB/T 9327.1-1988 | 电缆导体压缩和机械连接接头试验方法 总则 | Test methods for compression and mechanical connectors for conductors of power cables--General | |
| 29.060.20 | K13 | GB/T 9327.2-1988 | 电缆导体压缩和机械连接接头试验方法 直流电阻试验方法 | Test methods for compression and mechanical connectors for conducters of power cables--Test methods for measuremcnt of D.C resistance of connectors | |
| 29.060.20 | K13 | GB/T 9327.3-1988 | 电缆导体压缩和机械连接接头试验方法 短路试验方法 | Test methods for compression and mechanical connectors for conductors of power cables--Method of short-circuit testing | |
| 29.060.20 | K13 | GB/T 9327.4-1988 | 电缆导体压缩和机械连接接头试验方法 热循环试验方法 | Test methods for compression and mechanical connectors for conductors of power cables--Method of heat cycle testing | |
| 29.060.20 | K13 | GB/T 9327.5-1988 | 电缆导体压缩和机械连接接头试验方法 抗拉强度试验方法 | Test methods for compression and mechanical connectors for conductors of power cables--Method of tensile strength testing | |
| 29.060.20 | K13 | GB 9330.1-1988 | 塑料绝缘控制电缆 一般规定 | Plastic insulated control cables--General | |
| 29.060.20 | K13 | GB 9330.2-1988 | 塑料绝缘控制电缆 聚氯乙烯绝缘和护套控制电缆 | Plastic insulated control cables--Polyvinyl chloride insulated and sheathed control cables | |
| 29.060 | K13 | GB 9331.1-1988 | 额定电压0.6/1kV及以下船用电力电缆和电线 一般规定 | Shipboard power cables and wires of rated voltages up to and including 0.6/1 kV--General | |
| 29.060.20 | K13 | GB/T 9332.1-1988 | 船用控制电缆 一般规定 | Shipboard control cables--General | |
| 29.060.20 | K13 | GB/T 9333.1-1988 | 船用对称式通信电缆 一般规定 | Shipboard cables with symmetrical conductors--General | |
| 29.060.20 | K13 | GB/T 9334.1-1988 | 船用射频电缆 一般规定 | Shipboard radio-frequency cables--General | |
| 29.120.50 | K31 | GB 9364.1-1997 | 小型熔断器 第1部分: 小型熔断器定义和小型熔断体通用要求 | Miniature fuses Part 1: Definitions for miniature fuses and general requirement for miniature fuse-links | IDT IEC 60127-1:1988 |
| 29.120.50 | K31 | GB 9364.2-1997 | 小型熔断器 第2部分: 管状熔断体 | Miniature fuses Part 2: Cartridge fuse-links | IDT IEC 60127-2:1989 |
| 29.120.50 | K31 | GB 9364.3-1997 | 小型熔断器 第3部分; 超小型熔断体 | Miniature fuses Part 3: Sub-miniature fuse-links | IDT IEC 60127-3-1988 |
| 29.120.50 | K31 | GB 9364.6-2001 | 小型熔断器 第6部分: 小型管状熔断体的熔断器座 | Miniature fuses--Part 6: Fuse-holders for miniature cartridge fuse-links | IDT IEC 60127-6:1994 |
| 29.180 | M74 | GB/T 9367-1988 | 彩色广播电视接收机用回扫变压器总技术条件 | General specification of flyback transformers for color broadcasting TV receivers | |
| 29.220.30 | K82 | GB/T 9368-1988 | 镉镍碱性蓄电池 | Nickel-cadmium alkaline secondary cells | NEQ IEC 60623-83 |
| 29.220.30 | K82 | GB/T 9369-1988 | 镉镍碱性蓄电池组 | Nickel-cadmium alkaline secondary batteries | |
| 29.020 | L05 | GB/T 9414.1-1988 | 设备维修性导则 第一部分: 维修性导言 | Guide on maintainability of equipment--Part 1: Introduction to maintainability | EQV IEC 60706-1-82 |
| 29.020 | L05 | GB/T 9414.2-1988 | 设备维修性导则 第二部分: 规范与合同中的维修性要求 | Guide on maintainability of equipment--Part 2: Maintainability requirement in specification and contracts | EQV IEC 60706-2-82 |
| 29.020 | L05 | GB/T 9414.3-1988 | 设备维修性导则 第三部分: 维修性大纲 | Guide on maintainability of equipment--Part 3: maintainability programme | EQV IEC 60706-3 |
| 29.020 | L05 | GB/T 9414.4-1988 | 设备维修性导则 第五部分: 设计阶段的维修性研究 | Guide on maintainability of equipment--Part 5: Maintainability studies during the design phase | EQV IEC 60706-5 |
| 29.020 | L05 | GB/T 9414.5-1988 | 设备维修性导则 第六部分: 维修性检验 | Guide on maintainability of equipment--Part 6: Maintainability verification | |
| 29.020 | L05 | GB/T 9414.6-1988 | 设备维修性导则 第七部分: 维修性数据的收集、分析与表示 | Guide on maintainability of equipment--Part 7: Collection, analysis and presentation of data related to maintainability | |
| 29.020 | L05 | GB/T 9414.7-2000 | 设备维修性导则 第四部分: 诊断测试 | Guide on maintainability of equipment--Part 4: Diagnostic testing | IDT IEC 60706-5:1994 |
| 29.020 | L05 | GB/T 9414.8-2001 | 设备维修性导则 第九部分: 维修性评价的统计方法 | Guide on maintainability of equipment Part 9: Statistical methods in maintainability evaluation | IDT IEC 60706-6:1994 |
| 29.140 | K72 | GB/T 9473-1988 | 民用台灯通用技术条件 | General technical requirements of table lamp for civil use | |
| 29.040.20 | L32 | GB/T 9533-1988 | 微波固体电介质材料介电特性测试方法 同轴终端短路法 | Test method for the determination of the dielectric properties of solid dielectric materials at microwave frequencies--The method of coaxial terminal short circuit | NEQ ASTM D2520-81 |
| 29.040.20 | L32 | GB/T 9534-1988 | 毫米波频段固体电介质材料介电特性测试方法 准光腔法 | Test method for complex permittivity of solid dielectric materials at millimeter wave frequencies using "Quasi-Optic Cavity" technique | NEQ IEC 60377-2-77 |
| 29.120.30 | L23 | GB/T 9538-1988 | 带状电缆连接器总规范 | General specification of flat cable connector | EQV MIL-C 83503A |
| 29.100.10 | L19 | GB/T 9623-1988 | 通信用电感器和变压器磁芯 第一部分: 总规范 (可供认证用) | Inductor and transformer cores for telecommunications--Part 1: Generic specification | IDT IEC 60723-1-82 |
| 29.100.10 | L19 | GB/T 9624-1988 | 通信用电感器和变压器磁芯 第二部分: 分规范 电感器用磁性氧化物磁芯 (可供认证用) | Inductor and transformer cores for telecommunications--Part 2: sectional specification: Magnetic oxide cores for inductor applications | IDT IEC 60723-2-83 |
| 29.100.10 | L19 | GB/T 9625-1988 | 通信用电感器和变压器磁芯 第二部分: 空白详细规范 电感器用磁性氧化物磁芯 评定水平 A (可供认证用) | Inductor and transformer cores for telecommunications--Part 2: Blank detail specification: Magnetic oxide cores for inductor applications--Assessment level A | IDT IEC 60723-2-1-83 |
| 29.100.10 | L19 | GB/T 9626-1988 | 通信用电感器和变压器磁芯 第三部分: 分规范 宽带变压器用磁性氧化物磁芯 (可供认证用) | Inductor and transformer cores for telecommunications--Part 3: Sectional specification:Magnetic oxide cores for broad-band transformers | IDT IEC 60723-3-85 |
| 29.100.10 | L19 | GB/T 9627-1988 | 通信用电感器和变压器磁芯 第三部分: 空白详细规范 宽带变压器用磁性氧化物磁芯 评定水平 A和B (可供认证用) | Inductor and transformer cores for telecommunications--Part 3: Blank detail specification: Magnetic oxide cores for broad-band transformers--Assessment levels A and B | IDT IEC 60723-3-1-85 |
| 29.100.10 | L19 | GB/T 9628-1988 | 通信用电感器和变压器磁芯 第四部分: 分规范 电源变压器和扼流圈用磁性氧化物磁芯 (可供认证用) | Inductor and transformer cores for telecommunications--Part 4: sectional specification: Magnetic oxide cores for transformers and chokes for power applications | IDT IEC 60723-4-85 |
| 29.100.10 | L19 | GB/T 9629-1988 | 通信用电感器和变压器磁芯 第四部分: 空白详细规范 电源变压器和扼流圈用磁性氧化物磁芯 评定水平 A(可供认证用) | Inductor and transformer cores for telecommunications--Part 4: Blank detail specification: Magnetic oxide cores for transformers and chokes for power applications--Assessment level A | IDT IEC 60723-4-1-85 |
| 29.100.10 | L19 | GB/T 9630-1988 | 磁性氧化物制成的罐形磁芯及其附件的尺寸 | Dimensions of pot-cores made of magnetic oxides and associated parts | IDT IEC 60133-85 |
| 29.100.10 | L17 | GB/T 9632-1988 | 通信用电感器和变压器磁芯测量方法 | Measuring methods of cores for inductors and transformers for telecommunications | IDT IEC 60367-1-82 |
| 29.040.10 | L32 | GB/T 9633-1988 | 微波频率应用的旋磁材料性能测试方法 | Measuring methods for properties of gyromagnetic materials intended for application at microwave frequencies | IDT IEC 60556-82 |
| 29.040.10 | L19 | GB/T 9634-1988 | 磁性氧化物零件外形缺陷极限规范的指南 | Guide to the specification of limits for physical imperfections of parts made from magnetic oxides | IDT IEC 60424-73 |
| 29.040.10; | L19 | GB/T 9635-1988 | 天线棒测量方法 | Measuring methods for aerial rods | IDT IEC 60492-74 |
| 29.040.10 | L19 | GB/T 9636-1988 | 磁性氧化物制成的圆天线棒和扁天线棒 | Aerial rods and slabs made of magnetic oxides | IDT IEC 60203-66 |
| 29.160.30 | K22 | GB/T 9651-1988 | 单相异步电动机试验方法 | Test procedure for single phase induction motor | |
| 29.120.50 | K31 | GB/T 9815-1998 | 家用及类似用途的熔断器 | Fuses for domestic and similar purposes | IDT IEC 60241-1968 |
| 29.120.50 | K31 | GB 9816-1998 | 热熔断体的要求和应用导则 | Thermal-Links-Requirements and application guide | IDT IEC 60691:1993 |
| 29.040 | Q52 | GB/T 9973-1988 | 炭素材料透气度试验方法 | Test method for the permeability of carbon materials | EQV ASTM C577-78 |
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
国際整合 |
| 29.040.20 | K15 | GB/T 10064-1988 | 固体绝缘材料绝缘电阻的试验方法 | Methods of test for the determination of the insulation resistance of solid insulating materials | EQV IEC 60167-64 |
| 29.040.20 | K15 | GB/T 10065-1988 | 绝缘液体在电应力和电离作用下的析气性测定方法 | Gassing of insulating liquids under electrical stress and ionization | EQV IEC 60628-85 |
| 29.160.01 | K20 | GB 10068-2000 | 轴中心高为56mm及以上电机的机械振动 振动的测量、评定及限值 | Mechanical vibration of certain machines with shaft heights 56mm and higher--Measurement,evaluation and limits of vibration | IDT IEC 60034-14:1996 |
| 29.160 | K20 | GB/T 10069.1-1988 | 旋转电机噪声测定方法及限值 噪声工程测定方法 | Measurement of airborne noise emitted by rotating electrical machinery and the noise limits--Engineering method for the measurement of airborne noise | NEQ ISO 1680/1-86 |
| 29.160 | K20 | GB/T 10069.2-1988 | 旋转电机噪声测定方法及限值 噪声简易测定方法 | Measurement of airborne noise emitted by rotating electrical machinery and the noise limits--Survey method for the measurement of airborne noise | NEQ ISO 1680/2-86 |
| 29.160 | K20 | GB 10069.3-1988 | 旋转电机噪声测定方法及限值 噪声限值 | Measurement of airborne noise emitted by rotating electrical machinery and the noise limits--Noise limits | NEQ IEC 60034-9 |
| 29.220 | K82 | GB/T 10077-1988 | 锂电池最大外形尺寸和容量系列 | Maximum outside size and capacity series for lithium battery | |
| 29.040 | Q52 | GB/T 10130-1988 | 电极糊 | Electrode paste | |
| 29.100.10 | L19 | GB/T 10192-1988 | 磁性氧化物制成的螺纹磁芯的尺寸 | Dimensions of screw cores made of ferromagnetic oxides | IDT IEC 60221-66 |
| 29.035.99 | K15 | GB/T 10216-1998 | 云母纸 | Mica paper | EQV IEC 60371-3-2:1991 |
| 29.020 | K30 | GB/T 10217-1988 | 电工控制设备造型设计导则 | The design guide of the outline and structure for the electric control equipment | |
| 29.180 | K41 | GB/T 10228-1997 | 干式电力变压器技术参数和要求 | Specification and technical requirements for dry-type power transformers | |
| 29.180 | K42 | GB/T 10229-1988 | 电抗器 | Reactors | EQV IEC 60289-87 |
| 29.120.40 | K43 | GB 10230-1988 | 有载分接开关 | On-load tap-changers | EQV IEC 60214-87 |
| 29.120.70 | L25 | GB/T 10232-1994 | 电气继电器 第7部分: 有或无机电继电器测试程序 | Electrical relays--Part 7: Test and measurement procedures for electromechanical all-or-nothing relays | IDT IEC 60255-7-91 |
| 29.020 | K62 | GB/T 10233-1988 | 电气传动控制设备基本试验方法 | Basic test method for electric-driving control gear assemblies | NEQ IEC 60439 |
| 29.200 | K46 | GB/T 10236-1988 | 半导体电力变流器与电网互相干扰及其防护方法导则 | Guide for evaluation of interference effects and compatibility technology between semiconductor convertors and power supply system | NEQ IEEE Std19-81 |
| 29.180 | K43 | GB/T 10237-1988 | 电力变压器 绝缘水平和绝缘试验外绝缘的空气间隙 | Power transformers--Insulation levels and dielectric tests--External clearances in air | NEQ IEC 60076-3-1-87 |
| 29.180 | K24 | GB/T 10241-1988 | 旋转变压器通用技术条件 | Resolver, electrical ,general specification for | EQV MIL-R-23417A-75 |
| 29.160.30 | K24 | GB/T 10401-1989 | 永磁式直流力矩电动机通用技术条件 | Permanent magnet direct current torgue motors, general specification for | NEQ MIL 60144A |
| 29.160.30 | K24 | GB/T 10402-1989 | 磁阻式步进电动机通用技术条件 | Variable reluctance stepping motor, general specification for | NEQ DEF.STAN 14/1-85 |
| 29.160.30 | K24 | GB/T 10403-1989 | 多极和双通道感应移相器通用技术条件 | Multipolar and two-speed induction phase shifters, general specification for | NEQ MIL-R 23417A-85 |
| 29.180 | K24 | GB/T 10404-1989 | 多极和双通道旋转变压器通用技术条件 | Multipolar and two-speed electrical resolvers, general specification for | NEQ MIL-R 23417A-85 |
| 29.160.30 | L33 | GB/T 10405-2001 | 控制电机型号命名方法 | Type designation for control motor | |
| 29.280 | S80 | GB/T 10411-1989 | 地铁直流牵引供电系统 | D.C.traction power supply system for subway | NEQ IEC 60038-83 |
| 29.040.20 | K15 | GB/T 10579-1989 | 有溶剂绝缘漆检验、包装、标志、贮存和运输通用规则 | The general rules of insulating varnishes containing solvent for examing, packing, marking, storage and transportation | NEQ IEC 60464-1-76 |
| 29.040.20 | K15 | GB/T 10580-1989 | 固体绝缘材料在试验前和试验时采用的标准条件 | Standard conditions for use prior to and during the testing of solid insulating materials | EQV IEC 60212-71 |
| 29.040.20 | K15 | GB/T 10581-1989 | 固体绝缘材料在高温下绝缘电阻和体积电阻率的试验方法 | Method of test for insulation resistance and volume resistivity of insulating materials at elevated temperature | EQV IEC 60345-71 |
| 29.040.20 | K15 | GB/T 10582-1989 | 测定因绝缘材料而引起的电解腐蚀的试验方法 | Test methods for determining electrolytic corrosion with insulating materials | EQV IEC 60426-73 |
| 29.120.40 | K40 | GB/T 10584-1989 | 有载分接开关应用导则 | Application guide for on-load tap-changers | EQV IEC 60542-87 |
| 29.160.30 | K20 | GB/T 10585-1989 | 中小型同步电机励磁系统基本技术要求 | Fundamental requirements of excitation systems for medium and small synchronous machines | |
| 29.020 | K04 | GB/T 10593.1-1989 | 电工电子产品环境参数测量方法 振动 | Method of measuring of environmental parameters for electric and electronic products？Vibration | |
| 29.020 | K04 | GB/T 10593.2-1990 | 电工电子产品环境参数测量方法 盐雾 | Method of the measuring environmental parameters for electric and electronic products--Salt mist | |
| 29.020 | K04 | GB/T 10593.3-1990 | 电工电子产品环境参数测量方法 振动数据处理和归纳 | Methods of measuring environmental parameters for electric and electronic products - Treatment and induction for the vibration data | |
| 29.140 | K71 | GB 10681-1989 | 普通照明灯泡 | General service incandescent lamps | |
| 29.140.30 | K72 | GB 10682-1989 | 普通照明用管形荧光灯 | Tabular fluorescent lamps for general lighting service | NEQ IEC 60081-84 |
| 29.040 | Q51 | GB/T 10698-1989 | 可膨胀石墨 | Expansible graphite | |
| 29.160.40 | K26 | GB/T 10760.1-1989 | 小型风力发电机技术条件 | Specification for small wind generators | |
| 29.160.30 | K24 | GB/T 10761-1989 | 热带微电机基本技术条件 | General requirements for tropical electrical micro-machine | |
| 29.280 | K63 | GB/T 10762-1989 | 工矿电机车重量测定方法 | Method of weight measurement for industrial and mining electric locomotive | NEQ JIS E4011-79 |
| 29.020 | K30 | GB/T 10962-1989 | 机床电器可靠性通则 | General rules of reliability for machine tool electrical components | |
| 29.120.50 | K31 | GB 10963-1999 | 家用及类似场所用过电流保护断路器 | Circuit-breakers for overcurrent protection for household and similar installation | IDT IEC 60898:1995 |
| 29.120.50 | K30 | GB/T 10964-1989 | 电器附件、控制器和保护器术语 | Electrotechnical terminology of electrical accessories, controls and protectors | |
| 29.220.20 | K84 | GB/T 10978.2-1989 | 煤矿防爆特殊型电源装置用铅酸蓄电池 产品品种与规格 | Lead acid batteries for special type explosion proof power unit in coal mine - Product types and specification | |
| 29.140 | K74 | GB/T 10979-1989 | 家用和类似用途照明开关 | Household and similar use light switches | NEQ IEC 60669-1-81 |
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
国際整合 |
| 29.220.30 | K82 | GB/T 11013-1996 | 碱性二次电池和电池组 圆柱密封镉镍可充单体电池 | Alkaline secondary cells and batteries--Sealed nickel-cadmium cylindrical rechargeable single cells | IDT IEC 60285-1993 |
| 29.060.10 | K12 | GB/T 11016.1-1989 | 塑料绝缘和橡皮绝缘电话软线 一般规定 | Plastic or rubber insulated telephone cords - General | |
| 29.060.10 | K12 | GB/T 11016.2-1989 | 塑料绝缘和橡皮绝缘电话软线 聚氯乙烯绝缘电话软线 | Plastic or rubber insulated telephone cords - Polyvinyl chloride insulated telephone cords | |
| 29.060.10 | K12 | GB/T 11016.3-1989 | 塑料绝缘和橡皮绝缘电话软线 聚丙烯绝缘电话软线 | Plastic or rubber insulated telephone cords - Polypropylene insulated telephone cords | |
| 29.060.10 | K12 | GB/T 11016.4-1989 | 塑料绝缘和橡皮绝缘电话软线 橡皮绝缘电话软线 | Plastic or rubber insulated telephone cords - Rubber insulated telephone cords | |
| 29.060.20 | K13 | GB 11017-1989 | 额定电压110kV 铜芯、铝芯交联聚乙烯绝缘电力电缆 | Copper and aluminium conductor extruded XLPE insulated power cables with rated voltage 110kV | NEQ IEC 60840-88 |
| 29.060.10 | K12 | GB/T 11018.1-1989 | 丝包铜绕组线 一般规定 | Copper winding wires with silk covering？General | EQV IEC 60317-11 |
| 29.060.10 | K12 | GB/T 11018.2-1989 | 丝包铜绕组线 丝包单线 | Copper winding wires with silk covering--Single wire with silk covering | |
| 29.060.10 | K12 | GB/T 11018.3-1989 | 丝包铜绕组线 丝包束线 | Copper winding wires with silk covering？Bunched wires with silk covering | EQV IEC 60317-11 |
| 29.060.10 | K11 | GB/T 11019-1989 | 镀镍圆铜线 | Nickel coated round copper wire | EQV ASTM B355-80 |
| 29.040.20 | K10 | GB/T 11020-1989 | 测定固体电气绝缘材料暴露在引燃源后燃烧性能的试验方法 | Test methods for the determination of the flammability of solid electrical insulating materials when exposed to an igniting source | EQV IEC 60707-81 |
| 29.080 | K10 | GB/T 11021-1989 | 电气绝缘的耐热性评定和分级 | Thermal evaluation and classification of electrical insulation | EQV IEC 60085-84 |
| 29.120.60 | K43 | GB/T 11022-1999 | 高压开关设备和控制设备标准的共同技术要求 | Common specifications for high-voltage switchgear and controlgear standards | EQV IEC 60694:1996 |
| 29.120.60 | K43 | GB/T 11023-1989 | 高压开关设备六氟化硫气体密封试验方法 | Test guide of SF6 gas tightness for high-voltage switchgear | |
| 29.040.20 | K10 | GB/T 11026.1-1989 | 确定电气绝缘材料耐热性的导则 制订老化试验方法和评价试验结果的总规程 | Guide for the determination of thermal endurance properties of electrical insulating materials？General guidelines for ageing procedures and evaluation of test results | EQV IEC 60216-1-87 |
| 29.035.01 | K15 | GB/T 11026.2-2000 | 确定电气绝缘材料耐热性的导则 第2部分: 试验判断标准的选择 | Guide for the determination of thermal endurance properties of electrical insulating materials Part 2: Choice of test criteria | IDT IEC 60216-2:1990 |
| 29.035.01 | K15 | GB/T 11026.4-1999 | 确定电气绝缘材料耐热性的导则 第4部分: 老化烘箱 单室烘箱 | Guide for the determination of thermal endurance properties of electrical insulating materials-Part 4: Ageing ovens--Single-chamber ovens | IDT IEC 60216-4-1:1990 |
| 29.035.01 | K15 | GB/T 11027-1999 | 有溶剂绝缘漆规范 单项材料规范 对热固化浸渍漆的要求 | Specification for insulating varnishes containing solvent-Specifications for individual materials-Requirements for hot curing impregnating varnishes | EQV IEC 60464-3-2:1989 |
| 29.035.01 | K15 | GB/T 11028-1999 | 测定浸渍剂对漆包线基材粘结强度的试验方法 | Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate | EQV IEC 61033:1991 |
| 29.080.10 | K48 | GB 11030-2000 | 交流牵引线路用棒形瓷绝缘子 | Rod porcelain insulators for a.c.system traction lines | EQV IEC 60383-1:1994 |
| 29.080.99 | K49 | GB 11032-2000 | 交流无间隙金属氧化物避雷器 | Metal oxide surge arresters without gaps for a.c.systems | EQV IEC 60099-4:1991 |
| 29.040.30 | H21 | GB/T 11073-1989 | 硅片径向电阻率变化的测量方法 | Standard method for measuring radial resistivity variation on silicon slices | EQV ASTM F81-82 |
| 29.040.30 | H81 | GB/T 11093-1989 | 液封直拉法砷化镓单晶及切割片 | Liquid encapsulated czochralski-grown gallium arsenide single crystals and As-cut slices | |
| 29.040.20 | E38 | GB/T 11142-1989 | 绝缘油在电场和电离作用下析气性测定法 | Insulating oils - Determination of gassing under electrical stress and ionization | NEQ ASTM D2300-81 |
| 29.160 | J13 | GB/T 11281-1989 | 控制微电机用齿轮减速器系列 | Reduction gearhead series of electrical micro-machine for automatic control system | |
| 29.120.70 | K33 | GB/T 11287-2000 | 电气继电器 第21部分: 量度继电器和保护装置的振动、冲击、碰撞和地震试验 第1篇: 振动试验(正弦) | Electrical relays--Part 21: Vibration,shock,bump and seismic tests on measuring relays and protection equipment Section one: Vibration tests(sinusoidal) | IDT IEC 60255-21-1:1988 |
| 29.040.30 | L32 | GB/T 11297.6-1989 | 锑化铟单晶位错蚀坑的腐蚀显示及测量方法 | Standard method for showing and measuring dislocation etch pits in indium antimonide single cryatal | |
| 29.040.30 | L32 | GB/T 11297.7-1989 | 锑化铟单晶电阻率及霍耳系数的测试方法 | Test method for resistivity and hall coefficient indium antimonide single crystals | |
| 29.060.10 | K13 | GB/T 11327.1-1999 | 聚氯乙烯绝缘聚氯乙烯护套低频通信电缆电线 第1部分: 一般试验和测量方法 | Low-frequency telecommunication cables and wires with PVC insulation and PVC sheath--Part 1: General test and measuring methods | NEQ IEC 60189-1:1986 |
| 29.060.10 | K13 | GB/T 11327.2-1999 | 聚氯乙烯绝缘聚氯乙烯护套低频通信电缆电线 第2部分: 局用电缆(对线组或三线组或四线组或五线组的) | Low-frequency telecommunication cable and wires with PVC insulation and PVC sheath--Part 2: Cables in pairs,triples,quads and quintuples for inside installation | NEQ IEC 60189-2:1986 |
| 29.060.10 | K13 | GB/T 11327.3-1999 | 聚氯乙烯绝缘聚氯乙烯护套低频通信电缆电线 第3部分: 终端电缆(对线组的) | Low-frequency telecommunication cables and wires with PVC insulation and PVC sheath--Part 3: Terminating cables in pairs | NEQ IEC 60189-1:1986 |
| 29.100.10 | L19 | GB/T 11433-1989 | 磁性氧化物制成的管、针、柱磁芯的尺寸 | Dimensions of tubes, pins and rods of ferromagnetic oxides | IDT IEC 60220 |
| 29.100.10 | L19 | GB/T 11435-1989 | 铁氧体交流消音头磁芯 | Ferrite cores for AC erasing heads | |
| 29.100.10 | L19 | GB/T 11436-1989 | 软磁铁氧体材料成品、半成品化学分析方法 | Chemical analysis methods for products and semifinished products made of soft ferrite materials | |
| 29.100.10 | L19 | GB/T 11437-1989 | 广播接收机天线用铁氧体磁芯分规范 (可供认证用) | Ferrite cores used in broadcast receiver aerials sectional specification | |
| 29.100.10 | L19 | GB/T 11438-1989 | 广播接收机天线用铁氧体磁芯空白详细规范 评定水平 A (可供认证用) | Ferrite cores used in broadcast recever aerials blank detail specification - Assessment level A | |
| 29.100.10 | L17 | GB/T 11441-1989 | 通信和电子设备用变压器和电感器铁心片 | Laminations for transformers and inductors for use in telecommunication and electronic equipment | EQV IEC 60740-82 |
| 29.040.30; | L32 | GB/T 11496.3-1989 | 彩色显示管用Y30-R1荧光粉 | Phosphor Y30-R1 for color display tubes | |
| 29.120.30 | K30 | GB/T 11918-2001 | 工业用插头插座和耦合器 第1部分: 通用要求 | Plugs,socket-outlets and couplers for industrial purposes--Part 1: General requirements | IDT IEC 60309-1:1999 |
| 29.120.30 | K30 | GB/T 11919-2001 | 工业用插头插座和耦合器 第2部分: 带插销和插套的电器附件的尺寸互换性要求 | Plugs,socket-outlets and couplers for industrial purposes--Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories | IDT IEC 60309-2:1999 |
| 29.240.30 | K45 | GB 11920-1989 | 电站电气部分集中控制装置通用技术条件 | General specification of central control equipments for electrical parts in power stations and substations | NEQ IEC 60439-1-85 |
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
国際整合 |
| 29.020 | K35 | GB/T 12173-1990 | 矿用一般型电气设备 | Mining electrical apparatus for non hazardous area | NEQ ΓOCT 24754-81 |
| 29.160.30 | K20 | GB 12350-2000 | 小功率电动机的安全要求 | Safety requirements of small power motors | |
| 29.160 | K20 | GB/T 12351-1990 | 热带型旋转电机环境技术要求 | Enviromental technical requirements of rotating electric machines for tropical use | |
| 29.260.20 | K35 | GB 12476.1-2000 | 可燃性粉尘环境用电气设备 第1部分：用外壳和限制表面温度保护的电气设备 第1节 电气设备的技术要求 | Electrical apparatus for use in the presence of combustible dust--Part 1-1: Electrical apparatus protected by enclosures and surface temperature limitation-Specification for apparatus | IDT IEC 61241-1:1999 |
| 29.160.30 | A01 | GB 12497-1995 | 三相异步电动机经济运行 | Three-phase induction motor energy-saving operation | |
| 29.020 | K09 | GB/T 12501.2-1997 | 电工电子设备按电击防护分类 第2部分: 对电击防护要求的导则 | Classification of electrical and electronic equipment with regard to protection against electric shock--Part 2: Guidelines to requirements for protection against electric shock | IDT IEC 60536-2:1992 |
| 29.060.20 | K13 | GB 12527-1990 | 额定电压1 kV及以下架空绝缘电缆 | Aerial insulated cables of rated voltages up to and including 1 kV | NEQ IEC 60502 |
| 29.060.20 | K13 | GB 12528.1-1990 | 交流额定电压3 kV及以下铁路机车车辆用电缆(电线) 一般规定 | Insulated cables (wires) for railway vehicles of rated voltages up to and including 3 kV - General | |
| 29.040.20 | E30 | GB/T 12580-1990 | 加抑制剂矿物绝缘油氧化安定性测定法 | Inhibited mineral insulating oils - Determination of oxidation stability | IDT IEC 60474-74 |
| 29.040.20 | L92 | GB/T 12635-1990 | 碳膜电阻器用陶瓷基体 | Ceramic base body using in carbon film resistor | |
| 29.040.20 | L04 | GB/T 12636-1990 | 微波介质基片复介电常数带状线测试方法 | Stripline test method for complex permittivity of microwave dielectric substrates | |
| 29.040.20 | Y32 | GB/T 12656-1990 | 电容器纸工频击穿电压测定法 | Determination of electric strength at power frequence for capacitor paper | NEQ IEC 60243-1-88 |
| 29.040.20 | Y32 | GB/T 12657-1990 | 电容器纸导电点测定法 | Determination of conducting path for capacitor paper | NEQ IEC 60554-2-82 |
| 29.060 | K13 | GB/T 12666.1-1990 | 电线电缆燃烧试验方法 第一部分: 总则 | Test method on electric wires or cables under fire conditions - Part 1: General | |
| 29.060 | K13 | GB/T 12666.3-1990 | 电线电缆燃烧试验方法 第三部分: 单根电线电缆水平燃烧试验方法 | Test method on electric wires or cables under fire conditions - Part 3: Test on a single horitontal insulated wire or cable | NEQ NCB 610-74 |
| 29.060 | K13 | GB/T 12666.4-1990 | 电线电缆燃烧试验方法 第四部分: 单根电线电缆倾斜燃烧试验方法 | Test method on electric wires or cables under fire conditions - Part 4: Test on a single slanting insulated wire or cable | |
| 29.060 | K13 | GB/T 12666.6-1990 | 电线电缆燃烧试验方法 第六部分: 电线电缆耐火特性试验方法 | Test method on electric wires or cables under fire conditions - Part 6: Test on fire-resisting characteristics of wire or cable | EQV IEC 60331-70 |
| 29.160.30 | K62 | GB/T 12667-1990 | 同步电动机半导体励磁装置总技术条件 | General specification for excitaetion assembly with semiconductor for synchronous motor | |
| 29.160.30 | K62 | GB/T 12668-1990 | 交流电动机半导体变频调速装置总技术条件 | General specification for speed control assembly with semiconductor adjustable freguency for A.C.motor | |
| 29.160.10 | K62 | GB/T 12669-1990 | 半导体变流串级调速装置总技术条件 | General specification for cascade speed control assembly with semiconductor converter | |
| 29.060.20 | K13 | GB 12706.1-1991 | 额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆 第一部分: 一般规定 | Copper or aluminium conductor extruded plastic insulated power cables with rated voltages up to 35kV - Part 1: General | EQV IEC 60502-83 |
| 29.060.20 | K13 | GB 12706.2-1991 | 额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆 第二部分: 聚氯乙烯绝缘电力电缆 | Copper or aluminium conductor extruded plastic insulated power cables with rated voltages up to 35kV - Part2: Polyvinyl chloride insulated power cables | |
| 29.060.20 | K13 | GB 12706.3-1991 | 额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆 第三部分: 交联聚乙烯绝缘电力电缆 | Copper or aluminium conductor extruded plastic insulated power cables with rated voltages up to 35kV - Part3: Cross-linked polyethylene insulated power cables | |
| 29.220.30 | K82 | GB/T 12724-1991 | 锌银碱性蓄电池总规范 | General specification for silver-zinc rechargeable cells | |
| 29.220.30 | K82 | GB/T 12725-1991 | 铁镍碱性蓄电池总规范 | General specification for alkaline nickel-iron rechar geable batteries | |
| 29.080.10 | K48 | GB 12744-1991 | 耐污型户外棒形支柱瓷绝缘子 | Outdoor antipollution-type solid-core post insulators of ceramic material | |
| 29.160.40 | K52 | GB/T 12786-1991 | 自动化柴油发电机组通用技术条件 | Automatic diesel generating sets for general specification | |
| 29.040.10; | L19 | GB/T 12796-1991 | 永磁铁氧体磁体总规范 (可供认证用) | Generic specification for permanent ferrite magnets | |
| 29.040.10; | L19 | GB/T 12797-1991 | 微电机用永磁铁氧体磁体分规范 (可供认证用) | Sectional specification for permanent ferrite magnets for use in micromotors | |
| 29.040.10; | L19 | GB/T 12798-1991 | 磁性氧化物或铁粉制成的轴向引线磁芯 | Axial lead cores made of magnetic oxides or iron powder | IDT IEC 60701-81 |
| 29.060.20 | K04 | GB/T 12826-1991 | 移动设备用卷绕电缆载流量计算导则 | The calculation guide of the drum (reeling) cable's current rating | |
| 29.040.20 | Y32 | GB/T 12913-1991 | 电容器纸 | Capacitor tissue paper | NEQ IEC 60554-3-2-83 |
| 29.100 | K14 | GB 12940-1991 | 银石墨电触头技术条件 | Technical specification for silver-graphite electricalcontacts | |
| 29.080.20 | K35 | GB/T 12944.1-1991 | 高压穿墙瓷套管技术条件 | High-voltage ceramic wall bushings - Technical specifi cations | |
| 29.080.20 | K35 | GB/T 12944.2-1991 | 高压穿墙瓷套管 尺寸与特性 | High-voltage ceramic wall bushings - Dimensions and characteristics | |
| 29.045 | H82 | GB/T 12962-1996 | 硅单晶 | Monocrystalline silicon | |
| 29.045 | H82 | GB/T 12963-1996 | 硅多晶 | Polycrystalline silicon | EQV SEMI M16-1989 |
| 29.045 | H82 | GB/T 12964-1996 | 硅单晶抛光片 | Monocrystalline silicon polished wafers | EQV SEMI M1-1990 |
| 29.045 | H82 | GB/T 12965-1996 | 硅单晶切割片和研磨片 | Monocrystalline silicon ascut slices and lapped slices | |
| 29.060.10 | K13 | GB/T 12970.1-1991 | 电工软铜绞线 第一部分: 一般规定 | Flexible copper stranded conductors for electrical purposes - Part 1: General | |
| 29.060.10 | K13 | GB/T 12970.2-1991 | 电工软铜绞线 第二部分: 软铜绞线 | Flexible copper stranded conductors for electrical purposes - Part 2: Flexible copper stranded conductors | |
| 29.060.10 | K13 | GB/T 12970.3-1991 | 电工软铜绞线 第三部分: 软铜天线 | Flexible copper stranded conductors for electrical purposes - Part 3: Flexible copper wire for antenna | |
| 29.060.10 | K13 | GB/T 12970.4-1991 | 电工软铜绞线 第四部分: 铜电刷线 | Flexible copper stranded conductors for electrical purposes - Part 4: Copper brush wires | |
| 29.060.10 | K13 | GB 12971.1-1991 | 电力牵引用接触线 第一部分: 一般规定 | Trolley and contact wires for electric traction - Part 1: General | |
| 29.060.10 | K13 | GB 12971.2-1991 | 电力牵引用接触线 第二部分: 铜接触线 | Trolley and contact wires for electric traction - Part 2: Copper trolley and contact wires | |
| 29.060.10 | K13 | GB 12971.3-1991 | 电力牵引用接触线 第三部分: 钢、铝复合接触线 | Trolley and contact wires for electric traction - Part 3: Aluminium and steel composite trolley and contact wires | |
| 29.060.10 | K13 | GB 12971.4-1991 | 电力牵引用接触线 第四部分: 钢、铝及铝合金复合接触线 | Trolley and contact wires for electric traction - Part 4: Aluminium-steel and aluminium alloy composite trolley wires | |
| 29.060.10 | K13 | GB 12971.5-1991 | 电力牵引用接触线 第五部分: 铝合金接触线 | Trolley and contact wires for electric traction - Part 5: Aluminium alloy trolley and contact wires | |
| 29.060.20 | K13 | GB 12972.1-1991 | 矿用橡套软电缆 第一部分: 一般规定 | Flexible rubber-sheathed cables for mining purposes - Part 1: General | |
| 29.060.20 | K13 | GB 12972.2-1991 | 矿用橡套软电缆 第二部分: 额定电压0.66/1.14kV 及以下采煤机软电缆 | Flexible rubber-sheathed cables for mining purposes - Part 2: Flexible coalcutter cables for rated voltages up to 0.66/1.14kV | |
| 29.060.20 | K13 | GB 12972.3-1991 | 矿用橡套软电缆 第三部分: 额定电压0.66/1.14kV 采煤机屏蔽监视加强型软电缆 | Flexible rubber-sheathed cables for mining purposes - Part 3: Trailing coalcutter cables with monitoring core and semiconducting screens for rated voltage of 0.66/1.14kV | |
| 29.060.20 | K13 | GB 12972.4-1991 | 矿用橡套软电缆 第四部分: 额定电压0.66/1.14kV 采煤机金属屏蔽软电线 | Flexible rubber-sheathed cables for mining purposes - Part 4: Flexible coalcutter cables with indivdual metallic screens for rated voltage of 0.66/1.14kV | |
| 29.060.20 | K13 | GB 12972.5-1991 | 矿用橡套软电缆 第五部分: 额定电压0.66/1.14kV 及以下移动橡套软电缆 | Flexible rubber-sheathed cables for mining purposes - Part 5: Flexible cables for rated voltage up to 0.66/1.14kV | |
| 29.060.20 | K13 | GB 12972.6-1991 | 矿用橡套软电缆 第六部分: 额定电压3.6/6kV 屏蔽监视型软电缆 | Flexible rubber-sheathed cables for mining purposes - Part 6: Flexible cables with monitoring core and semiconducting screens for rated voltage of 3.6/6kV | |
| 29.060.20 | K13 | GB 12972.7-1991 | 矿用橡套软电缆 第七部分: 额定电压3.6/6kV 屏蔽橡套软电缆 | Flexible rubber-sheathed cables for mining purposes - Part 7: Flexible cables with screens for rated voltage of 3.6/6kV | |
| 29.060.20 | K13 | GB 12972.8-1991 | 矿用橡套软电缆 第八部分: 额定电压0.3/0.5kV 矿用电钻电缆 | Flexible rubber-sheathed cables for mining purposes - Part 8: Flexible drill cables for rated voltage of 0.3/0.5kV | |
| 29.060.20 | K13 | GB 12972.9-1991 | 矿用橡套软电缆 第九部分: 矿用移动轻型橡套软电缆 | Flexible rubber-sheathed cables for mining purposes - Part 9: Flexible light-duty cables | |
| 29.060.20 | K13 | GB 12972.10-1991 | 矿用橡套软电缆 第十部分: 矿工帽灯电线 | Flexible rubber-sheathed cables for mining purposes - Part 10: Miner's cap lamp cords | |
| 29.160.10 | K20 | GB/T 12973-1991 | 换向器和集电环的尺寸 | Dimensions for commutators and sliprings | |
| 29.160.30 | K26 | GB/T 12974-1991 | 交流电梯电动机通用技术条件 | General specification for a.c. lift motors | |
| 29.060.20 | K13 | GB/T 12976.1-1991 | 额定电压 35kV 及以下铜芯、铝芯纸绝缘电力电缆 第一部分: 一般规定 | Copper or aluminium conductor paper-insulated power cables with rated voltages up to 35kV - Part 1: General | |
| 29.060.20 | K13 | GB/T 12976.2-1991 | 额定电压 35kV 及以下铜芯、铝芯纸绝缘电力电缆 第二部分: 不滴流油浸纸绝缘金属套电力电缆 | Copper or aluminium conductor paper-insulated power cables with rated voltages up to 35kV - Part 2: Non-draining oil impregnated paper-insulated matal-sheathed power cables | |
| 29.060.20 | K13 | GB/T 12976.3-1991 | 额定电压35 kV 及以下铜芯、铝芯纸绝缘电力电缆 第三部分: 粘性油浸纸绝缘金属套电力电缆 | Copper or aluminium conductor paper-insulated power cables with rated voltages up to 35kV - Part 3: Resin oil impregneted paper-insulated metal-sheathed power cables | |
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
国際整合 |
| 29.160.10 | K20 | GB/T 13002-1991 | 旋转电机装入式热保护 旋转电机的保护规则 | Built-in thermal protection for rotating electrical machines - Rules for protection of rotating electrical machines | EQV IEC 60034-11-1-78 |
| 29.080.20 | K50 | GB/T 13026-1991 | 油纸电容式穿墙套管型式和尺寸 | Oil impregnated paper capacitance graded wall bushings - Types and dimensions | |
| 29.080.20 | K50 | GB/T 13027-1991 | 油纸电容式变压器套管型式和尺寸 | Oil impregnated paper capacitance graded transformer bushings - Types and dimensions | |
| 29.180 | K41 | GB 13028-1991 | 隔离变压器和安全隔离变压器 技术要求 | Isolating transformers and safety isolating transformers--Requirements | EQV IEC 60742-83 |
| 29.060.20 | K13 | GB/T 13033.1-1991 | 额定电压750V及以下矿物绝缘电缆及终端 第一部分: 一般规定 | Mineral insulated cables and their terminations with a rated voltage not exceeding 750V？Part 1: General | EQV IEC 60702-1-2-88 |
| 29.060.20 | K13 | GB/T 13033.2-1991 | 额定电压750V及以下矿物绝缘电缆及终端 第二部分: 铜芯铜护套矿物绝缘电缆 | Mineral insulated cables and their terminations with a rated voltage not exceeding 750V？Part 2: Mineral insulated cables with copper conductors and copper sheath | EQV IEC 60720-1-88 |
| 29.060.20 | K13 | GB/T 13033.3-1991 | 额定电压750V及以下矿物绝缘电缆及终端 第三部分: 铜芯铜护套矿物绝缘电缆终端 | Mineral insulated cables and their terminations with a rated voltage not exceeding 750V - Part 3: Terminations formineral insulated cables with copper conductors and copper sheath | EQV IEC 60720-1-86 |
| 29.160.30 | K24 | GB/T 13138-1991 | 自整角机通用技术条件 | Synchros General specification for | |
| 29.160.30 | K24 | GB/T 13139-1991 | 磁滞同步电动机通用技术条件 | Hysteresis synchronous motors - General specification for | |
| 29.120.30 | K30 | GB 13140.1-1997 | 家用和类似用途低压电路用的连接器件 第1部分：通用要求 | Connecting devices for low voltage circuits for household and similar purposes--Part 1: General requirements | IDT IEC 60998-1-1990 |
| 29.120.20 | K30 | GB 13140.2-1998 | 家用和类似用途低压电路用的连接器件 第2部分: 作为独立部件的带螺纹型夹紧件的连接器件的特殊要求 | Connecting devices for low voltage circuits for household and similar purposes Part 2: Particular requirements for connecting devices as separate entities with screw-type clamping units | IDT IEC 60998-2-1:1990 |
| 29.120.20 | K30 | GB 13140.3-1998 | 家用和类似用途低压电路用的连接器件 第2部分: 作为独立单元的带无螺纹型夹紧件的连接器件的特殊要求 | Connecting devices for low voltage circuits for household and similar purposes Part 2: Particular requirements for connecting devices as separate entities with screwless-type clamping units | IDT IEC 60998-2-2:1991 |
| 29.120.20 | K30 | GB 13140.4-1998 | 家用和类似用途低压电路用的连接器件 第2部分: 作为独立单元的带剌穿绝缘型夹紧件的连接器件的特殊要求 | Connecting devices for low voltage circuits for household and similar purposes Part 2: Particular requirements for connecting devices as separate entities with insulation piercing clamping units | IDT IEC 60998-2-3:1991 |
| 29.120.20 | K30 | GB 13140.5-1998 | 家用和类似用途低压电路用的连接器件 第2部分: 扭接式连接器件的特殊要求 | Connecitng devices for low-voltage circuits for household and similar purposes Part 2: Particular requirements for twist-on connecting devices | IDT IEC 60998-2-4:1993 |
| 29.120.20 | K30 | GB 13140.6-2000 | 家用和类似用途低压电路用的连接器件 第2部分: 端子或连接器件用(端接和/或分接)接线盒的特殊要求 | Connecting devices for low-voltage circuits for household and similar purposes Part 2: Particular requirements for connecting boxes (junction and/or tapping)for terminals or connecting devices | IDT IEC 60998-2-5:1996 |
| 29.160.10 | K20 | GB 13232-1991 | 旋转电机装入式热保护 热保护器通用规则 | Built-in thermal protection for rotating electrical machines - General rules for thermal protectors | EQV IEC 60034-11-3-84 |
| 29.140.30 | K71 | GB/T 13259-1991 | 高压钠灯泡 | High pressure sodium lamps | NEQ IEC 60662-87 |
| 29.140.10 | K74 | GB 13260-1991 | 管形荧光灯座和启动器座型式和尺寸 | Typs and dimensions of lampholders for tubular fluorescent lamps and starterholders | EQV IEC 60061-2H-87 |
| 29.140.10 | K74 | GB/T 13261-1991 | 管形荧光灯座和启动器座检验量规 | Gauges of lampholders for tubular fluorescent lamps and starterholders | EQV IEC 60061-3-87 |
| 29.220.20 | K84 | GB/T 13281-1991 | 铁路客车用铅酸蓄电池 | Lead-acid batteries used for passenger trains | |
| 29.220.20 | K84 | GB/T 13337.1-1991 | 固定型防酸式铅酸蓄电池技术条件 | Stationary acidapray-proof lead-acid batteries Technical conditions | |
| 29.220.20 | K84 | GB/T 13337.2-1991 | 固定型防酸式铅酸蓄电池 规格及尺寸 | Stationary acidspray-proof lead-acid batteries - Capacity specifications and size | |
| 29.120.10 | K60 | GB/T 13381.1-1992 | 电气安装用导管的技术要求 通用要求 | Specification for conduits for electrical installations - General reguirements | NEQ IEC 60614-1-78 |
| 29.040.30 | H21 | GB/T 13387-1992 | 电子材料晶片参考面长度测量方法 | Test method for measuring flat length on slices of electronic materials | IDT ASTM F671-83 |
| 29.040.30 | H21 | GB/T 13388-1992 | 硅片参考面结晶学取向Ｘ射线测量方法 | Method for measuring crystallographic orientation of flats on single crystal silicon slices and wafers by X-ray techniques | IDT ASTM F847-83 |
| 29.040.30 | H21 | GB/T 13389-1992 | 掺硼掺磷硅单晶电阻率与掺杂剂浓度换算规程 | Practice for conversion between resistivity and dopant density for boron-doped and phosphorus-doped silicon | IDT ASTM F723-87 |
| 29.160 | K04 | GB/T 13394-1992 | 电工技术用字母符号 旋转电机量的符号 | Letter symbols to be used in electrical technology - Symbols for quantities to be used for rotating electrical machines | EQV IEC 60027-4-85 |
| 29.120.20 | K14 | GB 13397-1992 | 合金内氧化法银金属氧化物电触头技术条件 | Technical specification for silver-metaloxide electrical contacts by alloy internal oxidation method | NEQ ГOCT 19725 |
| 29.200 | K81 | GB/T 13422-1992 | 半导体电力变流器 电气试验方法 | Power semiconductor converters - Electrical test methods | |
| 29.140.30 | K71 | GB/T 13434-1992 | 高压钠灯泡特性的测试方法 | Test method for H.P.S.Lamps | |
| 29.040.20 | G94 | GB/T 13465.1-1992 | 不透性石墨材料力学性能试验方法总则 | General rules for test methods of mechanical properties of impermeable graphite materials | |
| 29.040.20 | G94 | GB/T 13465.2-1992 | 不透性石墨材料抗弯强度试验方法 | Test method for flexure strength of impermeable graphite materials | |
| 29.040.20 | G94 | GB/T 13465.3-1992 | 不透性石墨材料抗压强度试验方法 | Test method for compressive strength of impermeable graphite meterials | |
| 29.040.20 | G94 | GB/T 13465.4-1992 | 不透性石墨材料冲击试验方法 | Method for impact testing of impermeable graphite materials | |
| 29.020 | K46 | GB/T 13498-1992 | 高压直流输电术语 | Terminology for high-voltage direct current transmission | NEQ IEC 60633-78 |
| 29.180 | K41 | GB/T 13499-1992 | 电力变压器应用导则 | Application guide for power transformers | EQV IEC 60606-78 |
| 29.160.30 | K26 | GB/T 13500-1992 | 封闭式制冷压缩机用三相异步电动机 通用技术条件 | Three phase asynchronous motors for hermetic refrigeration compressors - General specifications | |
| 29.160.30 | K26 | GB/T 13501-1992 | 封闭式制冷压缩机用电动机绝缘耐氟试验方法 | Electric motors for hermetic refrigeration compressors - Test methods of insulation resistance to freon | |
| 29.020 | K04 | GB/T 13534-1992 | 电气颜色标志的代号 | Code for designation of colours for electricity | EQV IEC 60757-83 |
| 29.160 | L33 | GB/T 13537-1992 | 电子类家用电器用电动机通用技术条件 | Miniature motors for electronic household appliances, general specification for | |
| 29.120.50 | K31 | GB 13539.1-1992 | 低压熔断器 基本要求 | General requirements for low-voltage fuses | NEQ IEC 60269-1-86 |
| 29.120.50 | K31 | GB 13539.2-1992 | 低压熔断器 专职人员使用的熔断器的补充要求 | Low-voltage fuses - Supplementary requirements for fuses for use by authorized persons | NEQ IEC 60269-2-86 |
| 29.120.50 | K31 | GB 13539.3-1999 | 低压熔断器 第3部分: 非熟练人员使用的熔断器的补充要求(主要用于家用和类似用途的熔断器) | Low-voltage fuses--Part 3: Supplementary requirements for fuses for use by unskilled person (fuses for mainly for household and similar apllication) | IDT IEC 60269-3:1987 |
| 29.120.50 | K31 | GB 13539.4-1992 | 低压熔断器 半导体器件保护用熔断体的补充要求 | Low-voltage fuses - Supplementary requirements for fuse-links for the protection of semiconductor devices | NEQ IEC 60269-4-1986 |
| 29.120.50 | K31 | GB/T 13539.5-1999 | 低压熔断器 第3部分: 非熟练人员使用的熔断器的补充要求(主要用于家用和类似用途的熔断器) 标准化熔断器示例 | Low-voltage fuses--Part 3: Supplementary requirements for fuses for use by unskilled person (fuses for mainly for household and similar apllication)--Examples of standardized fuses | IDT IEC 60269-3-1:1994 |
| 29.120.60 | K40 | GB/T 13540-1992 | 高压开关设备抗地震性能试验 | Anti-seismic characteristic test for high-voltage switchgear | |
| 29.140 | K70 | GB/T 13582-1992 | 电子调光设备通用技术条件 | Generic specification for electronic lighting control equipments | |
| 29.160.10 | K20 | GB/T 13599-1992 | 旋转电机装入式热保护 热保护系统用热检测器和控制单元 | Built-in thermal protection for rotating electrical machines - Thermal detectors and control units used in thermal protection systems | EQV IEC 60034-11-2-84 |
| 29.120.60 | K40 | GB/T 13601-1992 | 高压开关设备严重冰冻条件下的操作试验 | Operating tests under severe ice conditions for high-voltage switchgear | NEQ IEC 60129-84 |
| 29.160.20 | K24 | GB/T 13633-1992 | 永磁式直流测速发电机 通用技术条件 | Permanent magnet D.C. tachogenerator--General specification | |
| 29.240.30; | K40 | GB/T 13729-1992 | 远动终端通用技术条件 | General specification for remote terminal unit | NEQ IEC 60870-88 |
| 29.240.30; | K40 | GB/T 13730-1992 | 地区电网数据采集与监控系统通用技术条件 | General specification for SCADA system to the district power network | NEQ IEC 60870-88 |
| 29.040.10 | H21 | GB/T 13789-1992 | 单片电工钢片带磁性能测量方法 | Magnetic sheet and strip--Methods of measurement of magnetic properties by means of a single sheet tester | EQV IEC 60404-3-1982 |
| 29.040 | H60 | GB/T 13811-1992 | 超导材料术语 | Terms for superconducting materials | NEQ ASTM B713-82 |
| 29.040.30 | L97 | GB/T 13840-1992 | 晶片承载器 | Wafer carriers | NEQ SEMI E1,E1.1~1.5 |
| 29.040.20 | L92 | GB/T 13841-1992 | 电子陶瓷件表面粗糙度 | Surface roughness for electronic ceramic parts | |
| 29.040.30 | L90 | GB/T 13843-1992 | 蓝宝石单晶抛光衬底片 | Polished monocrystalline sapphire substrates | NEQ SEMI M3-1983 |
| 29.060.20 | K13 | GB/T 13849.1-1993 | 聚烯烃绝缘聚烯烃护套市内通信电缆 第1部分:一般规定 | Local telecommunication cables with polyolefin insulation and polyolefin sheath--Part 1: General | EQV IEC 60841-4-1 |
| 29.060.20 | K13 | GB/T 13849.2-1993 | 聚烯烃绝缘聚烯烃护套市内通信电缆 第2部分:铜芯、实心或泡沫(带皮泡沫)聚烯烃绝缘、非填充式、挡潮层聚乙烯护套市内通信电缆 | Local telecommunication cables with polyolefin insulation and polyolefin sheath--Part 2 Unfilled, moisture barrier polyethylene sheathed local telecommunication cables with copper conductors and solid or cellular polyolefin insulation | EQV IEC 60841-4-2 |
| 29.060.20 | K13 | GB/T 13849.3-1993 | 聚烯烃绝缘聚烯烃护套市内通信电缆 第3部分:铜芯实心或泡沫(带皮泡沫)聚烯烃绝缘、填充式、挡潮层聚乙烯护套市内通信电缆 | Local telecommunication cables with polyolefin insulation and polyolefin sheath--Part 3: Filled,moisture barrier polyethylene sheathed local telecommunication cables with copper conductors and solid or cellular polyolefin insulation | EQV IEC 60841-4-3 |
| 29.060.20 | K13 | GB/T 13849.4-1993 | 聚烯烃绝缘聚烯烃护套市内通信电缆 第4部分:铜芯实心或b聚烯烃绝缘(非填充)自承式、挡潮层聚乙烯护套市内通信电缆 | Local telecommunication cables with polyolefin insulation and polyolefin sheath--Part 4:Unfilled,moisture barrier polyethylene sheathed local telecommunication cables with copper conductors,solid polyolefin insulation and integral suspension strand | EQV IEC 60841-4-4 |
| 29.060.20 | K13 | GB/T 13849.5-1993 | 聚烯烃绝缘聚烯烃护套市内通信电缆 第5部分:铜芯、实心或泡沫(带皮泡沫)聚烯烃绝缘、隔离式(内屏蔽)、挡潮层聚乙烯护套市内通信电缆 | Local telecommunication cables with polyolefin insulation and polyolefin sheath--Part 5:Moisture barrier polyethylene sheathed and seperated(inner-screened)local telecommunication cables with copper conductors and solid or cellular polyolefin insulat | EQV IEC 60841-4-5 |
| 29.120.40 | K60 | GB/T 13862-1992 | 器具开关基本试验方法 | Basic testing methods of switches for appliance | |
| 29.040.20 | K15 | GB 13950-1992 | 电气绝缘用聚酯薄膜 | Polyester film used as electrical insulation | NEQ IEC TC 15/SC 15C 277 |
| 29.120.50 | K09 | GB 13955-1992 | 漏电保护器安装和运行 | Installation and operation of residual current operated protective devices | |
| 29.160.30 | K22 | GB/T 13957-1992 | 大型三相异步电动机基本系列技术条件 | Technical requirements for the fundamental series of 3-phase large asynchronous motors | |
| 29.160.30 | K21 | GB/T 13958-1992 | 无直流励磁绕组同步电动机试验方法 | Test procedure for non'direct current excitation winding synchronous motor | |
| 29.140 | K72 | GB/T 13961-1992 | 灯具用电源导轨系统 | Electrical supply track systems for luminaires | IDT IEC 60570 |
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
国際整合 |
| 29.180 | L75 | GB/T 14006-1992 | 通信和电子设备用变压器和电感器外形尺寸 第一部分: 采用 YEI-1铁心片的变压器和电感器 | Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment--Part 1: Transformers and inductors using YEI-1 laminations | IDT IEC 60852-1 |
| 29.180 | L17 | GB/T 14006.2-1997 | 通信和电子设备用变压器和电感器外形尺寸 第2部分: 采用Yex-2系列铁心片印制板安装式 变压器和电感器 | Outline dimemsions of transformers and inductors for use in telecommunication and electronic equipment--Part 2; Transformers and inductors using Yex-2 laminations for printed wiring board mounting | IDT IEC 60852-2:1992 |
| 29.180 | L17 | GB/T 14006.3-1997 | 通信和电子设备用变压器和电感器外形尺寸 第3部分: 使用YUI-1系列铁心片的变压器和电感器 | Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment--Part 3: Transformers and inductors using YUI-1 laminations | IDT IEC 60852-3-1992 |
| 29.040.30 | L90 | GB/T 14015-1992 | 硅-蓝宝石外延片 | Silicon on sapphire epitaxial wafers | NEQ SEMI M3-1983 |
| 29.140.30 | K74 | GB/T 14044-1993 | 管形荧光灯镇流器性能要求 | Ballasts for tubular fluorescent lamps--Performance requirements | NEQ IEC 60921(1988) |
| 29.140.30 | K71 | GB 14045-1993 | 放电灯(管形荧光灯除外)用镇流器的一般要求和安全要求 | Ballasts for discharge lamps (excluding tubular fluorescent lamps) general and safety requirements | EQV IEC 60922 |
| 29.120.70 | K45 | GB/T 14047-1993 | 量度继电器和保护装置 | Measuring relays and protection equipment | IDT IEC 60255-6(1988) |
| 29.120.01 | K30 | GB/T 14048.1-2000 | 低压开关设备和控制设备 总则 | Low-voltage switchgear and controlgear General rules | EQV IEC 60947-1:1999 |
| 29.120.40 | K31 | GB 14048.2-2001 | 低压开关设备和控制设备 低压断路器 | Low-voltage switchgear and controlgear Low-voltage circuit breakers | IDT IEC 60947-2:1997 |
| 29.120.60 | K31 | GB 14048.3-1993 | 低压开关设备和控制设备 低压开关、隔离器、隔离开关及熔断器组合电器 | Low-voltage switchgear and controlgear--Low-voltage switches, disconnectors, switch-disconnectors and fuse-combination units | EQV IEC 60947-3-90 |
| 29.120.50 | K32 | GB 14048.4-1993 | 低压开关设备和控制设备 低压机电式接触器和电动机起动器 | Low-voltage switchgear and controlgear--Low-voltage electromechanical contactors and motor starters | EQV IEC 60947-4-1-90 |
| 29.120.40 | K31 | GB 14048.5-2001 | 低压开关设备和控制设备 第5-1部分 控制电路电器和开关元件 机电式控制电路电器 | Low-voltage switchgear and controlgear Part 5-1: Control circuit devices and switching element Electromechanical control circuit devices | EQV IEC 60947-5-1:1997 |
| 29.120.50 | K32 | GB 14048.6-1998 | 低压开关设备和控制设备 接触器和电动机起动器 第2部分: 交流半导体电动机控制器和起动器 | Low-voltage switchgear and controlgear Contactors and motor-starters Section 2: AC Semiconductor motor controllers and starters | IDT IEC 60947-4-2:1995 |
| 29.120.60 | K30 | GB 14048.7-1998 | 低压开关设备和控制设备辅助电器 第1部分: 铜导体的接线端子排 | low-voltage switchgear and controlgear Ancillary equipment Section 1-Terminal blocks for copper conductors | EQV IEC 60947-7-1:1989 |
| 29.120.60 | K30 | GB 14048.8-1998 | 低压开关设备和控制设备辅助电器 第2部分: 铜导体的保护导体接线端子排 | Low-voltage switchgear and controlgear Ancillary equipment Section 2: Protective conductor terminal blocks for copper conductors | EQV IEC 60947-7-2:1995 |
| 29.120.50 | K32 | GB 14048.9-1998 | 低压开关设备和控制设备 多功能电器(设备) 第2部分: 控制与保护开关电器(设备) | Low-voltage switchgear and controlgear Multiple function equipment Section 2: Control and protective switching devices(or equipment)(CPS) | IDT IEC 60947-6-2:1992 |
| 29.120.60 | K30 | GB/T 14048.10-1999 | 低压开关设备和控制设备 控制电路电器和开关元件 第2部分 接近开关 | Low-voltage switchgear and controlgear--Control circuit devices and switching element--Section 2: Proximity switches | IDT IEC 60947-5-2:1992 |
| 29.060.20 | K13 | GB 14049-1993 | 额定电压10kV、35kV架空绝缘电缆 | Aerial insulated cables with rated voltages of 10kV and 35kV | NEQ IEC 60502 |
| 29.020 | K09 | GB 14050-1993 | 系统接地的型式及安全技术要求 | Types and safety technical requirements of system earthing | |
| 29.140.30 | K71 | GB/T 14094-1993 | 卤钨灯 | Tungsten halogen lamps | NEQ IEC 60357 |
| 29.060.20 | K13 | GB/T 14134-1993 | 纸绝缘铅套市内通信电缆 | Local telecommunication cables with paper insulation and lead sheath | |
| 29.060.20 | K13 | GB/T 14135-1993 | 铜芯星绞铅套高频对称通信电缆 | High frequency symmetrical telecommunication cables with copper conductor star quads and lead sheath | |
| 29.040.30 | H81 | GB/T 14139-1993 | 硅外延片 | Silicon epitaxial wafers | NEQ SEMI S2 |
| 29.040.30 | H21 | GB/T 14141-1993 | 硅处延层、扩散层和离子注入层薄层电阻的测定 直排四探针法 | Test method for sheet resistance of silicon epitaxial, diffused and ion-implanted layers using a collinear four-probe array | EQV ASTM 374-84 |
| 29.040.30 | H26 | GB/T 14142-1993 | 硅外延层晶体完整性检查方法 腐蚀法 | Test method for crystallographic perfection of epitaxial layers in silicon by etching techniques | NEQ ASTM F80-85 |
| 29.040.30 | H26 | GB/T 14143-1993 | 300 - 900μm硅片间隙氧含量红外吸收测量方法 | 300 - 900μm Silicon slices--Measuring of interstitial oxygen content--Infrared absorption method | NEQ ASTM F121-83 |
| 29.040.30 | H26 | GB/T 14144-1993 | 硅晶体中间隙氧含量径向变化测量方法 | Test method for determination of radial interstitial oxygen variation in silicon | EQV ASTM F951-87 |
| 29.040.30 | H24 | GB/T 14145-1993 | 硅外延层堆垛层错密度测定 干涉相衬显微镜法 | Test method for stacking fault density of epitaxial layers of silicon by interference-contrast microscopy | NEQ ASTM F522-84 |
| 29.040.30 | H21 | GB/T 14146-1993 | 硅外延层载流子浓度测定 汞探针电容-电压法 | Silicon epitaxial layers--Determination of carrier concentration--Mercury probe Valtage-capacitance method | NEQ DIN 50439-82 |
| 29.140.20 | K71 | GB 14196-1993 | 普通照明灯泡的安全要求 | Safety requirements for tungsten filament lamps for domestis and similar general lighting purposes | EQV IEC 60432-84 |
| 29.140 | K70 | GB/T 14218-1993 | 电子调光设备性能参数与测试方法 | Electronic lighting control equipment--Performance,Parameters and measurement methods | |
| 29.040.30 | H80 | GB/T 14264-1993 | 半导体材料术语 | Semiconductor materials--Terms and definitions | NEQ ASTM F 1241-89 |
| 29.020 | L97 | GB/T 14276-1993 | 绕接工具总规范 | Wire wrapping tools,General specification for | NEQ MIL-T-83508-79 |
| 29.120.40 | L22 | GB/T 14280-1993 | 热时间延迟开关总规范 | Thermal time delay switch, Generic specification of | EQV IEC 60388-1-1972 |
| 29.120.40 | L22 | GB/T 14281-1993 | 恒温开关总规范 | Thermostatic switch, Generic specification of | EQV IEC 60389-1 |
| 29.120.50 | F21 | GB 14285-1993 | 继电保护和安全自动装置技术规程 | Technical code for relaying protection and security automatic equipment | |
| 29.120.50 | C81 | GB 14287-1993 | 防火漏电电流动作报警器 | Residual current operated alarm devices for fire prevention | |
| 29.100.20 | K13 | GB/T 14315-1993 | 电力电缆导体用压接型铜、铝接线端子和连接管 | Compression type terminal lugs and ferrules for power cables with copper or aluminium conductors | NEQ IEC 60020 |
| 29.060.20 | K13 | GB 14316-1993 | 间距1.27mm绝缘刺破型端接式聚氯乙烯绝缘带状电缆 | PVC insulated ribbon cable with a pitch of 1.27mm suitable for insulation displacement termination | EQV IEC 60918-87 |
| 29.240.30; | F21 | GB/T 14430-1993 | 单边带电力线载波系统设计导则 | Planning of single-sideband power line carrier systems | NEQ IEC 60663 |
| 29.160 | K21 | GB/T 14481-1993 | 单相同步电机试验方法 | Test procedure for single-Phase synchronous machine | NEQ IEC 60034-1 |
| 29.040.20 | G38 | GB/T 14517-1993 | 绝缘胶粘带工频耐电压试验方法 | Test method for dielectric strength of insulating adhesive tape at power frequency | NEQ IEC 60243-1-1988 |
| 29.120.60 | K32 | GB 14536.1-1998 | 家用和类似用途电自动控制器 第1部分: 通用要求 | Automatic electrical controls for household and similar use Part 1: General requirements | IDT IEC 60730-1:1993 |
| 29.120.60 | K09 | GB 14536.2-1996 | 家用和类似用途电自动控制器 家用电器用电控制器的特殊要求 | Automatic electrical controls for household and similar use--P articular requirements for electrical controls for electrical household appliances | IDT IEC 60730-2-1-1989 |
| 29.120.60 | K09 | GB 14536.3-1996 | 家用和类似用途电自动控制器 电动机热保护器的特殊要求 | Automatic electrical controls for household and similar use--P articular requirements for thermal motor protectors | IDT IEC 60730-2-2-1990 |
| 29.120.60 | K09 | GB 14536.4-1996 | 家用和类似用途电自动控制器 管形荧光灯镇流器热保护器的特殊要求 | Automatic electrical controls for household and similar use-- Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps | IDT IEC 60730-2-3-1990 |
| 29.120.60 | K09 | GB 14536.5-1996 | 家用和类似用途电自动控制器 密封和半密封电动机-压缩机用电动机热保护器的特殊要求 | Automatic electrical controls for household and similar use--Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type | IDT IEC 60730-2-4-1990 |
| 29.120.60 | K09 | GB 14536.6-1996 | 家用和类似用途电自动控制器 燃烧器电自动控制系统的特殊要 | Automatic electrical controls for household and similar use--Particular requirements for automatic electrical burner control systems | IDT IEC 60730-2-5-1993 |
| 29.120.60 | K09 | GB 14536.7-1996 | 家用和类似用途电自动控制器 压力敏感电自动控制器的特殊要求(包括机械要求) | Automatic electrical controls for household and similar use--Particular requirementsfor automatic electrical pressure sensing controls including mechanical requirements | IDT IEC 60730-2-6-1991 |
| 29.120.60 | K09 | GB 14536.8-1996 | 家用和类似用途电自动控制器 定时器和定时开关的特殊要求 | Automatic electrical controls for household and similar use--Particular requirements for timers and time switches | IDT IEC 60730-2-7-1990 |
| 29.120.60 | K09 | GB 14536.9-1996 | 家用和类似用途电自动控制器 电动水阀的特殊要求(包括机械要求) | Automatic electrical controls for household and similar use--Particular requirements for electrically operated water valves, including mechanical requirements | IDT IEC 60730-2-8-1992 |
| 29.120.60 | K09 | GB 14536.10-1996 | 家用和类似用途电自动控制器 温度敏感控制器的特殊要求 | Automatic electrical controls for household and similar use--Particular requirements for temperature sensing controls | IDT IEC 60730-2-9-1992 |
| 29.120.60 | K09 | GB 14536.11-1996 | 家用和类似用途电自动控制器 电动机用起动继电器的特殊要求 | Automatic electical eontrols for household and similar use--Partieular requirements for electricaly operated motor starting relays | IDT IEC 60730-2-10-1991 |
| 29.120.60 | K09 | GB 14536.12-1996 | 家用和类似用途电自动控制器 能量调节器的特殊要求 | Automatic electrcal controls for household and similar use--Particular requirements for energy regulators | IDT IEC 60730-2-11-1993 |
| 29.120.60 | K09 | GB 14536.13-1996 | 家用和类似用途电自动控制器 电动门锁的特殊要求 | Automatic electrcal controls for household and similar use particular requirements for electrically operated door locks | IDT IEC 60730-2-12-1993 |
| 29.120.60 | K09 | GB 14536.14-1998 | 家用和类似用途电自动控制器 家用洗衣机电脑程序控制器的特殊要求 | Automatic electrical controls for household and similar use--Particular requirements for household washing machine microcomputer controller | |
| 29.120.60 | K09 | GB 14536.15-1999 | 家用和类似用途电自动控制器 湿度敏感控制器的特殊要求 | Automatic electrical controls for household and similar use--Particular requirements for humidity sensing controls | IDT IEC 60730-2-13:1997 |
| 29.120.60 | K09 | GB 14536.16-2000 | 家用和类似用途电自动控制器 电起动器的特殊要求 | Automatic electrical controls for household and similar use-Particular requirements for electric actuators | IDT IEC 60730-2-14:1995 |
| 29.120.70 | K45 | GB/T 14598.15-1998 | 电气继电器 第8部分: 电热继电器 | Thermal electrical relays | IDT IEC 60255-8:1990 |
| 29.120.70 | L25 | GB/T 14598.1-1993 | 电气继电器 电气继电器的触点性能 | Electrical relays--Contact performance of electrical ralays | IDT IEC 60255-0-20-74 |
| 29.120.70 | L25 | GB/T 14598.2-1993 | 电气继电器 有或无电气继电器 | Electrical relays--All-or-nothing electrical relays | EQV IEC 60255-1-00-75 |
| 29.120.70 | L25 | GB/T 14598.3-1993 | 电气继电器 第五部分: 电气继电器的绝缘试验 | Electrical relays--Part 5: Insulation tests for electrical relays | EQV IEC 60255-5-77 |
| 29.120.70 | L25 | GB/T 14598.4-1993 | 电气继电器 第十四部分: 电气继电器触点的寿命试验 触点负载的优先值 | Electrical relays--Part 14: Endurance test for electrical relay contacts--Preferred values for contact loads | IDT IEC 60255-14-81 |
| 29.120.70 | L25 | GB/T 14598.5-1993 | 电气继电器 第十五部分: 电气继电器触点的寿命试验 试验设备的特性规范 | Electrical relays--Part 15: Endurance tests for electrical relay contacts--Specification for the characteristics of test equipment | IDT IEC 60255-15-81 |
| 29.120.70 | L25 | GB/T 14598.6-1993 | 电气继电器 第十八部分: 有或无通用继电器的尺寸 | Electrical relays--Part 18: Dimensions for general purpose all-or-nothing relays | IDT IEC 60255-18-82 |
| 29.120.70 | K45 | GB/T 14598.7-1995 | 电气继电器 第3部分:它定时限或自定时限的单输入激励量量度继电器 | Electrical relays--Part 3: Single input energizing quantity measuring relays with dependent or independent time | IDT IEC 60255-3-89 |
| 29.120.70 | K45 | GB/T 14598.8-1995 | 电气继电器 第20部分: 保护系统 | Electrical relays--Part 20: Protection (protective)systems | IDT IEC 60255-20-1984 |
| 29.120.70 | K45 | GB/T 14598.9-1995 | 电气继电器 第22部分: 量度继电器和保护装置的电气干扰试验 第三篇: 辐射电磁场干扰试验 | Electrical relays--Part 22: Electrical disturbance tests for measuring relays and protection equipment--Section three--Radiated electromagnetic field disturbance tests | IDT IEC 60255-22-3-1989 |
| 29.120.70 | F22 | GB/T 14598.10-1996 | 电气继电器 第22部分：量度继电器和保护装置的电气干扰试验 第4篇：快速瞬变干扰试验 | Electrical relays--Part 22: Electrical disturbance tests for measuring relays and protection equipment--Section 4: Fast transient disturbance test | IDT IEC 60255-22-4-1992 |
| 29.120.70 | K45 | GB/T 14598.11-1997 | 电气继电器 第19部分: 分规范: 有质量评定的有或无机电继电器 | Electrical relays--Part 19: Sectional specification--Electromechanical all-or-nothing relays of assessed quality | IDT IEC 60255-19:1983 |
| 29.120.70 | K45 | GB/T 14598.12-1998 | 电气继电器 第19部分: 空白详细规范: 有质量评定的有或无机电继电器 试验一览表1,2和3 | Electrical relays Part 19:Blank detail specification:Electromechanical all-or-nothing relays of assessed quality Test schedules 1,2 and 3 | IDT IEC 60255-19-1:1983 |
| 29.120.70 | K45 | GB/T 14598.13-1998 | 量度继电器和保护装置的电气干扰试验 第1部分: 1MHz脉冲群干扰试验 | Electrical disturbance tests for measuring relays and protection equipment Part 1: 1MHz burst disturbance tests | EQV IEC 60255-22-1:1988 |
| 29.120.70 | K45 | GB/T 14598.14-1998 | 量度继电器和保护装置的电气干扰试验 第2部分: 静电放电试验 | Electrical disturbance tests for measuring relays and protection equipment Part 2: Electrostatic discharge tests | IDT IEC 60255-22-2:1996 |
| 29.160 | K20 | GB 14711-1993 | 中小型旋转电机安全通用要求 | General requirements for safety of small and medium size rotating electrical machines | NEQ IEC 60034-1 |
| 29.130.10 | K43 | GB/T 14808-2001 | 交流高压接触器和基于接触器的电动机起动器 | High-voltage alternating current contactors and contactor-based motor-starters | EQV IEC 60470:1999 |
| 29.120.40 | K43 | GB/T 14810-1993 | 110kV及以上交流高压负荷开关 | AC high voltage switches for rated voltages of 110kV and above | NEQ IEC 60265-2-88 |
| 29.160.30 | K26 | GB/T 14816-1993 | 井用潜油三相异步电动机通用技术条件 | Three-phase asynchronous submersible electric motors for oil well--General specification | |
| 29.160.30 | K24 | GB/T 14817-1993 | 永磁式直流伺服电动机通用技术条件 | General specification for permanent magnet DC servomotors | |
| 29.160.30 | K24 | GB/T 14818-1993 | 线绕盘式直流伺服电动机通用技术条件 | General specification for DC servomotors with wounded disc armature | |
| 29.160.30 | K24 | GB/T 14819-1993 | 电磁式直流伺服电动机通用技术条件 | General specification for wound field DC servomotors | NEQ MIL-S-81963 |
| 29.120.10 | K48 | GB/T 14823.1-1993 | 电气安装用导管 特殊要求--金属导管 | Particular specifications for metal conduits for electrical installations | NEQ IEC 60614-2-1-82 |
| 29.120.10 | K48 | GB/T 14823.2-1993 | 电气安装用导管 特殊要求--刚性绝缘材料平导管 | Particular specifications for rigid plain conduits of insulating materials for electrical | NEQ IEC 60614-2-2-80 |
| 29.120.10 | K48 | GB/T 14823.4-1993 | 电气安装用导管 特殊要求--可弯曲自恢复绝缘材料导管 | Particular specifications for pliable self-recovering conduits of insulating materials for electrical installations | NEQ IEC 60614-2-4-85 |
| 29.120.60 | K43 | GB/T 14824-1993 | 发电机断路器通用技术条 | Common technical requirements for generator circuit-breaker | |
| 29.040.30 | H80 | GB/T 14844-1993 | 半导体材料牌号表示方法 | Designations of semiconductor materials | |
| 29.040.30 | H21 | GB/T 14847-1993 | 重掺杂衬底上轻掺杂硅外延层厚度的红外反射测量方法 | Test method for thickness of lightly doped silicon epitaxial layers on heavily doped silicon substrates by infrared reflectance | EQV ASTM F95-89 |
| 29.040.30 | H17 | GB/T 14849.1-1993 | 工业硅化学分析方法 1,10-二氮杂菲分光光度法测定铁量 | Silicon metal--Determination of iron content-1,10-Phenanthroline spectrophotometric method | NEQ COST 1904.1-73 |
| 29.040.30 | H17 | GB/T 14849.2-1993 | 工业硅化学分析方法 铬天青-S分光光度法测定铝量 | Silicon metal--Determination of aluminum content--Chrome azurol S spectrophotometric method | NEQ COST 1904.2-73 |
| 29.040.30 | H17 | GB/T 14849.3-1993 | 工业硅化学分析方法 钙量的测定 | Silicon metal--Determination of calcium content | NEQ COST 1904.3-73 |
| 29.180 | L17 | GB/T 14860-1993 | 通信和电子设备用变压器和电感器总规范 | Generic specification for transformers and inductors for use in telecommunication and electronic equipment | |
| 29.040.30 | L41 | GB/T 14863-1993 | 用栅控和非栅控二极管的电压-电容关系测定硅外延层中净载流子浓度的标准方法 | Standard test method for net carrier density in silicon epitaxial layers by voltage-capacitance of gated and ungated diodes | |
| 29.060.20 | L27 | GB/T 14864-1993 | 实芯聚乙烯绝缘射频电缆 | Radio frequency cables with solid polyethylene dielectric | NEQ IEC 60096-2(1961) |
| 29.140 | R87 | GB 14886-1994 | 道路交通信号灯安装规范 | The installation specification for road traffic signals | |
| 29.140 | R87 | GB 14887-1994 | 道路交通信号灯技术条件及测试方法 | The technical conditions and testing methods for rood traffic signals | |
| 29.040.30 | K16 | GB/T 14898-1994 | 人造金刚石用石墨片 | Graphite for making synthetic diamond | |
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
国際整合 |
| 29.040.20 | K15 | GB/T 15022-1994 | 电气绝缘无溶剂可聚合树脂复合物定义和一般要求 | Definitions and general requirements for solventless polymerisable resinous compounds used for electrical insulation | NEQ IEC 60455-1-74 |
| 29.040.20 | K15 | GB/T 15023-1994 | 电气绝缘无溶剂可聚合树脂复合物试验方法 | Test methods for solventless polymerisable resinous compounds used for electrical insulation | NEQ IEC 60455-2-74 |
| 29.140 | K71 | GB 15039-1994 | 发光强度、总光通量标准灯泡 | Standard lamps for the measurment of luminous intensity and luminous flux | |
| 29.140 | K71 | GB 15040-1994 | 普通测光标准灯泡 | Photometrle standard lamp for general lighting serviue | |
| 29.140.30 | K71 | GB/T 15041-1994 | 高压短弧氙灯 | High pressure xenon short arc lamps | |
| 29.140.30 | K71 | GB/T 15042-1994 | 高压钠灯泡用镇流器性能要求 | Ballast for high pressure sodium lamp property requirement | NEQ IEC 60923 |
| 29.140.20 | K71 | GB/T 15043-1994 | 白炽灯泡光电参数的测量方法 | Methods for measuring electrical and luminous parameters of incandescent lamps | |
| 29.040 | Q51 | GB/T 15064.1-1994 | 显象管石墨乳试验方法 固形分、挥发分、灰分和pH值试验方法 | Method for solid,volatile and ash content and pH value of colloidal graphite for kinescope | |
| 29.040 | Q51 | GB/T 15064.2-1994 | 显象管石墨乳试验方法 粘度试验方法 | Method for viscosity of colloldal graphite for kinescope | |
| 29.040 | Q51 | GB/T 15064.3-1994 | 显象管石墨乳试验方法 电阻率试验方法 | Method for resistivity of colloidal graphite for kinescope | |
| 29.040 | Q51 | GB/T 15064.4-1994 | 显象管石墨乳试验方法 附着性试验方法 | Method for adherence of colloidal graphite for kinescope | |
| 29.040 | Q51 | GB/T 15064.5-1994 | 显象管石墨乳试验方法 造孔性试验方法 | Method for aperture-forming effect of colloidal graphite for kinescope | |
| 29.040 | Q51 | GB/T 15064.6-1994 | 显象管石墨乳试验方法 耐湿性试验方法 | Method for moisture resistance of colloidal graphite for kinescope | |
| 29.040 | Q51 | GB/T 15064.7-1994 | 显象管石墨乳试验方法 粒度试验方法 | Method for size distribution of colloidal graphite for kinescope | |
| 29.040 | Q51 | GB/T 15064.8-1994 | 显象管石墨乳试验方法 铁和铜含量试验方法 | Method for iron and copper contents of colloidal graphite for kinescope | |
| 29.120.40 | K64 | GB 15092.1-2000 | 器具开关 第一部分: 通用要求 | Switches for appliances Part 1: General requirements | IDT IEC 61058-1:1996 |
| 29.120.40 | K65 | GB 15092.2-1994 | 器具开关 第2部分: 软线开关的特殊要求 | Switches for appliances--Part 2: Particular requirements for cord switches | EQV IEC 61058-2-1 |
| 29.120.40 | K65 | GB 15092.3-1998 | 器具开关 第二部分: 转换选择器的特殊要求 | Switches for appliances Part 2: Particular requirements for change-over selectors | IDT IEC 61058-2-5:1994 |
| 29.120.40 | K65 | GB 15092.4-1999 | 器具开关 第2部分: 独立安装开关的特殊要求 | Switches for appliances--Part 2: Particular requirements for independently mounted switches | IDT IEC 61058-2-4:1995 |
| 29.220.30 | K82 | GB/T 15100-1994 | 金属氢化物镍圆柱密封碱性蓄电池总规范 | General specification for alkaline nickle-metal hydride cylindrical sealed rechargeable batteries | |
| 29.020 | K05 | GB/T 15139-1994 | 电工设备结构总技术条件 | General technical standard for electrical equipment structure | |
| 29.220.30 | K82 | GB/T 15142-1994 | 镉镍碱性蓄电池总规范 | General specification for nickel-cadmium alkaline rechargeable single cells | NEQ IEC 60623-90 |
| 29.140 | K74 | GB 15143-1994 | 管形荧光灯用交流电子镇流器一般要求和安全要求 | A.C supplied electronic ballasts for tubular fluorescent lamps--General and safety requirements | IDT IEC 60928-90 |
| 29.140 | K74 | GB/T 15144-1994 | 管形荧光灯用交流电子镇流器性能要求 | A.C supplied electronic ballasts for tubular fluorescent lamps--Performance requirements | EQV IEC 60929 |
| 29.120.50 | K45 | GB/T 15145-2001 | 微机线路保护装置 通用技术条件 | General specification for microprocessor-based transmission line protection equipment | |
| 29.040.20 | L90 | GB/T 15155-1994 | 滤波器用压电陶瓷材料通用技术条件 | Generic specification for piezoelectric ceramic for use in filters | NEQ GOST 13927-80 |
| 29.180 | K41 | GB/T 15164-1994 | 油浸式电力变压器负载导则 | Loading guide for oil-immersed power transformers | IDT IEC 60354-91 |
| 29.120.50 | K43 | GB/T 15166.1-1994 | 交流高压熔断器 术语 | Alternating-current high-voltage fuses Terminology | NEQ IEC 60291
IEC 60.291A |
| 29.120.50 | K43 | GB 15166.2-1994 | 交流高压熔断器 限流式熔断器 | Alternating-current high-voltage fuses--Current-limiting fuses | NEQ IEC 60282-1 |
| 29.120.50 | K43 | GB 15166.3-1994 | 交流高压熔断器 喷射式熔断器 | Alternating-current high-voltage fuses--Expulsion fuse | NEQ IEC 60282-2 |
| 29.120.50 | K43 | GB/T 15166.4-1994 | 交流高压熔断器 通用试验方法 | Alternating-current high-voltage fuses--General test method | NEQ IEC 60282-1 |
| 29.120.50 | K43 | GB 15166.5-1994 | 交流高压熔断器 关联电容器外保护用熔断器 | Alternating-current high-voltage fuse--Fuses for the external protection of shunt power capacitors | NEQ IEC 60549 |
| 29.180 | L17 | GB/T 15183-1994 | 按能力批准评定质量的电子设备用电源变压器分规范 | Sectional specification for power transformers for use in electronic equipment for capability approval | |
| 29.180 | L17 | GB/T 15184-1994 | 按能力批准评定质量的电子设备用开关电源变压器分规范 | Sectional specification for power transformers for switched mode power supplies (SMPS) for use in electronic equipment for capability approval | |
| 29.180 | L17 | GB/T 15290-1994 | 电子设备用电源变压器和滤波扼流圈总技术条件 | Generic specification of power supply-transformers and filter chokes for use in electronic equipment | |
| 29.040.20 | G38 | GB/T 15333-1994 | 绝缘用胶粘带电腐蚀试验方法 | Test method for electrolysis corrosion of electrical insulating adhesive tapes | NEQ JIS C2338 |
| 29.120.10 | L91 | GB/T 15396-1994 | 射频电缆和连接器用六角和正方形压模腔体、压头、标准规、外导体压接套和中心接触件压接导线筒的尺寸 | Dimensions for hexagonal and square crimping-die cavities, indentors, gauges,outer conductor crimp sleeves and centre contact crimp barrels for r.f. cables and connectors | EQV IEC 60803-84 |
| 29.120.99? | K44 | GB/T 15576-1995 | 低压无功功率静态补偿装置总技术条件 | The specifications of low-voltage reactive power steady compensation equipments | NEQ IEC 60831-1 |
| 29.120.70? | K45 | GB/T 15633-1995 | 非定时限单输入激励量的量度继电器及保护装置 | Single input energizing quantify measuring relays and protective equipment with nonspecified-time | NEQ IEC 60255-3 |
| 29.100.50? | J20 | GB/T 15623-1995 | 电液伺服阀试验方法 | Hydraulic fluid power--Servovales--Test methods | NEQ ISO 6404-1985【廃版】 |
| 29.260.20? | K25 | GB 15703-1995 | 隔爆型电机基本技术要求 | General specification for flameproof electrical machines | NEQ IEC 60079 |
| 29.040.20 | H81 | GB/T 15713-1995 | 锗单晶片 | Monocrystalline germanium slices | |
| 29.040.20 | C92 | GB/T 15750-1995 | 压电陶瓷材料老化性能试验规程 | Test program for the ageing properties of piezoelectric ceramics | |
| 29.140.20 | K71 | GB 15766.1-2000 | 道路机动车辆灯丝灯泡 尺寸、光电性能要求 | Filament lamps for road vehicles--Dimensional,electrical and luminous requirements | IDT IEC 60809:1995 |
| 29.140.20 | K71 | GB/T 15766.2-2000 | 道路机动车辆灯丝灯泡 性能要求 | Filament lamps for road vehicles--Performance requirements | IDT IEC 60810:1993 |
| 29.120.40 | K71 | GB/T 15766.3-2000 | 道路机动车辆灯丝灯泡 辅助用灯泡 | Filament lamps for road vehicles--For supplementary purposes | EQV IEC 60983:1995 |
| 29.040.10 | J04 | GB/T 15822-1995 | 磁粉探伤方法 | Methods for magnetic particle testing | NEQ JIS G565-92 |
| 29.060.10 | K30 | GB 15934-1996 | 电线组件 | Cord sets | IDT IEC 60799-1984 |
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
国際整合 |
| 29.180 | K41 | GB/T 16274-1996 | 油浸式电力变压器技术参数和要求 500kV级 | Specification and technical requirements for oil immersed power transformers 500kV | NEQ ΓOCT 17544-1985 |
| 29.120 | K48 | GB/T 16316-1996 | 电气安装用导管配件的技术要求 第1部分:通用要求 | Specification for conduit fittings for electrical installations--Part 1: General requirements | EQV IEC 61035-1-1990 |
| 29.160 | K63 | GB/T 16318-1996 | 旋转牵引电机基本试验方法 | Basic test method for rotating traction electrical machines | NEQ IEC 60349-1991 |
| 29.080 | F20 | GB/T 16434-1996 | 高压架空线路和发电厂、变电所环境污区分级及外绝缘选择标准 | Enviromental pollution classification and external insulation selection for high voltage transmission line, power plant and substation | |
| 29.240.30 | F21 | GB/T 16435.1-1996 | 远动设备及系统 接口(电气特性) | Telecontrol equipment and systems interfaces (electrical characteristics) | IDT IEC 60870-3-1989 |
| 29.240.30 | F21 | GB/T 16436.1-1996 | 远动设备及系统 第1部分: 总则 第2篇: 制定规范的导则 | Telecontrol equipment and systems--Part 1: General considerations--Section 2 :Guide for specifications | IDT IEC 60870-1-2-1989 |
| 29.160.40 | K59 | GB/T 16437-1996 | 小型风力发电机组结构安全要求 | Safety requirements for small wind turbine generator structures | |
| 29.160.30 | K62 | GB/T 16439-1996 | 交流伺服系统通用技术条件 | General specification for A.C.servo system | NEQ ΓOCT 27803-1988 |
| 29.020 | K09 | GB/T 16842-1997 | 检验外壳防护用的试具 | Test probes to verify protection by enclosures | IDT IEC 61032:1990 |
| 29.020 | K00 | GB/T 16499-1996 | 编制电气安全标准的导则 | Guide to the drafting of electrical safety standards | EQV IEC GUIDE 104-1984 |
| 29.120.60 | L22 | GB/T 16514-1996 | 电子设备用机电开关 第5部分: 按钮开关分规范 | Electromechanical switches for use in electronic equipment--Part 5: Sectional specification for pushbutton switches | IDT IEC 61020-5-1991 |
| 29.035.40 | G31 | GB/T 16581-1996 | 绝缘液体燃烧性能试验方法 氧指数法 | Test method for the determination of oxygen index of insulating liquids | EQV IEC 61144-1992 |
| 29.045 | H82 | GB/T 16595-1996 | 晶片通用网格规范 | Specification for a universal wafer grid | EQV SEMI M 17-1990 |
| 29.045 | H21 | GB/T 16596-1996 | 确定晶片坐标系规范 | Specification for establishing a wafer coordinate system | EQV SEMI M 20-1992 |
| 29.120.70 | L25 | GB/T 16608-1996 | 电气继电器 第10部分: IEC电子元器件质量评定体系在有或无继电器上的应用 | Electrical relays--Part 10: Application of the IEC quality assessment system for electronic components to all-or-nothing relays | IDT IEC 60255-10-1979 |
| 29.020 | K04 | GB/T 16700-1996 | 集中网络控制装置的标准频率 | Standard frequencies for centralized network control installations | EQV IEC 60242-1967【廃版】 |
| 29.120.70 | K45 | GB 16836-1997 | 量度继电器和保护装置安全设计的一般要求 | General requirements of safety design for measuring relays and protection equipment | |
| 29.120.30 | K30 | GB 16837-1997 | 家用和类似用途移动式，无联锁、带开关及熔断器组合插座的安全要求 | Safety requirements for switched and fused portable multiple socket-outlet without interlock for household and similar purposes | |
| 29.140.30 | Y09 | GB 16843-1997 | 单端荧光灯的安全要求 | Single-capped fluorescent lamps--Safety specifications | IDT IEC 61199:1993 |
| 29.140.40 | Y09 | GB 16844-1997 | 普通照明用自镇流灯的安全要求 | Self-ballasted lamps for general lighting services--Safety requirements | IDT IEC 60968:1988 |
| 29.180 | K41 | GB 16847-1997 | 保护用电流互感器暂态特性技术要求 | Requirements for protective current transformers for transient performance | IDT IEC 60044-6:1992 |
| 29.200 | K46 | GB/T 16859-1997 | 阀器件堆、装置和电力变流设备的端子标记 | Terminal markings for valve device stacks and assemblies and for power convertor equipment | IDT IEC 61148:1992 |
| 29.120.99 | K60 | GB 16895.1-1997 | 建筑物电气装置 第1部分：范围、目的和基本原则 | Electrical installations of buildings Part 1: Scope, object and fundamental principles | IDT IEC 60364-1:1992 |
| 29.120.50 | K60 | GB 16895.2-1997 | 建筑物电气装置 第4部分：安全防护 第42章：热效应保护 | Electrical installations of buildings--Part 4: Protection for safety Chapter 42: Protection against thermal effects | IDT IEC 60364-4-42:1980 |
| 29.120.99 | K60 | GB 16895.3-1997 | 建筑物电气装置 第5部分: 电气设备的选择和安装 第54章 接地配置和保护导体 | Electrical installations of buildings Part 5: Selection and erection of electrical equipment Chapter54: Earthing arrangements and protective conductors | IDT IEC 60364-5-54:1980 |
| 29.120 | K60 | GB 16895.4-1997 | 建筑物电气装置 第5部分 电气设备的选择和安装 第53章: 开关设备和控制设备 | Electrical installations of buildings--Part 5: Selection and erection of electrical equipment Chapter 53: Switchgear and controlgear | IDT IEC 60364-5-53:1994 |
| 29.240.10 | K40 | GB/T 16896.1-1997 | 高电压冲击试验用数字记录仪 第一部分: 对数字记录仪的要求 | Digital recorders for measurements in high--Voltage impulse tests--Part 1: Requirements for digital recorders | EQV IEC 61083-1:1991 |
| 29.120.40 | K60 | GB 16915.1-1997 | 家用和类似用途固定式电气装置的开关 第1部分：通用要求 | Switches for household and similar fixed-electrical installations--Part 1: General requirements | EQV IEC 60669-1:1993 |
| 29.120.40 | K60 | GB 16915.2-2000 | 家用和类似用途固定式电气装置的开关 第2部分: 特殊要求 第1节: 电子开关 | Switches for household and similar fixed-electrical installations Part 2: Particular requirements Section 1: Electronic switches | EQV IEC 60669-2-1:1996 |
| 29.120.40 | K60 | GB 16915.3-2000 | 家用和类似用途固定式电气装置的开关 第2部分: 特殊要求 第2节: 遥控开关(RCS) | Switches for household and similar fixed electrical installations--Part 2: Particular requirements--Section2: Remote-control switches(RCS) | IDT IEC 60669-2-2:1996 |
| 29.120.50 | K31 | GB 16916.1-1997 | 家用和类似用途的不带过电流保护的剩余电流动作断路器(RCCB) 第1部分：一般规则 | Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses(RCCB)--Part 1: Genaral rules | IDT IEC 61008-1:1990 |
| 29.120.50 | K31 | GB 16916.21-1997 | 家用和类似用途的不带过电流保护的剩余电流动作断路器(RCCB) 第2.1部分：一般规则对动作功能与线路电压无关的RCCB的适用性 | Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses(RCCB)--Part 2.1: Applicability of the general rules to RCCB functionally independent of line voltage | IDT IEC 61008-2-1:1990 |
| 29.120.50 | K31 | GB 16916.22-1997 | 家用和类似用途的不带过电流保护的剩余电流动作断路器(RCCB) 第2.2部分：一般规则对动作功能与线路电压有关的RCCB的适用性 | Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB)--Part 2.2: Applicability of the general rules to RCCB functionally dependent on line voltage | IDT IEC 61008-2-2:1990 |
| 29.120.50 | K31 | GB 16917.1-1997 | 家用和类似用途的带过电流保护的剩余电流动作断路器(RCBO) 第1部分：一般规则 | Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO)--Part 1: General rules | IDT IEC 61009-1:1991 |
| 29.120.50 | K31 | GB 16917.21-1997 | 家用和类似用途的带过电流保护的剩余电流动作断路器(RCB0) 第2.1部分：一般规则对动作功能与线路电压无关的RCBO的适用性 | Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO) Part 2.1: Applicability of the general rules to RCBO functionally independent of line voltage | IDT IEC 61009-2-1:1991 |
| 29.120.50 | K31 | GB 16917.22-1997 | 家用和类似用途的带过电流保护的剩余电流动作断路器(RCBO) 第2.2部分：一般规则对动作功能与线路电压有关的RCBO的适用性 | Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses(RCBO) Part 2.2: Applicability of the general rules to RCBO functionally dependent on line voltage | IDT IEC 61009-2-2:1991 |
| 29.120.60 | K43 | GB 16926-1997 | 交流高压负荷开关--熔断器组合电器 | High--voltage alternating current switch-fuse combinations | EQV IEC 60420:1990 |
| 29.120 | K30 | GB/T 16935.1-1997 | 低压系统内设备的绝缘配合 第一部分: 原理、要求和试验 | Insulation coordination for eguipment within low-voltage systems--Part 1: Principles,requirements and tests | IDT IEC 60664-1:1992 |
| 29.160.30 | L33 | GB/T 16961-1997 | 电子调速微型异步电动机通用技术条件 | GENERAL SPECIFICATION FOR Motors, asynchronous, miniature, electronic regulator | |
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
国際整合 |
| 29.060.10 | K11 | GB/T 17048-1997 | 架空绞线用硬铝线 | Hard-drawn aluminium wire for overhead line conductors | IDT IEC 60889:1987 |
| 29.045 | H24 | GB/T 17169-1997 | 硅抛光片和外延片表面质量光反射测试方法 | Test method for the surface quality of polished silicon wafers and epitaxial wafers by optical-reflection | |
| 29.045 | H21 | GB/T 17170-1997 | 非掺杂半绝缘砷化镓单晶深能级EL2浓度红外吸收测试方法 | Test method for deep level EL2 concentration of undoped semi-insulating monocrystal gallium arsenide by measurement infrared absorption method | |
| 29.120.10 | K30 | GB/T 17193-1997 | 电气安装用超重荷型刚性钢导管 | Extra-heavy duty rigid steel conduits for electrical installations | IDT IEC 60981:1989 |
| 29.120.10 | K30 | GB/T 17194-1997 | 电气导管 电气安装用导管的外径和导管与配件的螺纹 | Conduits for electrical purposes--Outside diameters of conduits for electrical installations and threads of conduits and fittings | EQV IEC 60423:1993 |
| 29.120.30 | K30 | GB 17196-1997 | 连接器件 连接铜导线用的扁形快速连接端头 安全要求 | Connecting devices--Flat quick-connect terminations for electrical copper conductors--Safety requirements | IDT IEC 61210:1993 |
| 29.180 | K41 | GB 17201-1997 | 组合互感器 | Combined transformers | EQV IEC 60044-3:1980 |
| 29.020 | K65 | GB 17202-1997 | 工业电动洗衣机安全要求 | Safety requirements for electric commercial clothes-washing equipment | NEQ UL 1206:1994 |
| 29.240 | K41 | GB/T 17211-1998 | 干式电力变压器负载导则 | Loading guide for dry-type power transformers | EQV IEC 60905-1987 |
| 29.140.30 | K71 | GB/T 17262-1998 | 单端荧光灯 性能要求 | Single-capped fluorescent lamp--Performance requirements | NEQ IEC 60901:1996 |
| 29.140.30 | K71 | GB/T 17263-1998 | 普通照明用自镇流荧光灯 性能要求 | Self-ballasted lamps for general lighting service--Performance requirements | NEQ IEC 60969:1988 |
| 29.020 | K09 | GB 17285-1998 | 电气设备电源额定值的标记 安全要求 | Marking of electrical equipment with ratings related to electrical supply-Safety requiremnts | IDT IEC 61293:1994 |
| 29.180 | K41 | GB/T 17443-1998 | 500kV电流互感器技术参数和要求 | Specification and technical requirements for 500kV current transformers | |
| 29.120.30 | K30 | GB 17464-1998 | 连接器件 连接铜导线用的螺纹型和无螺纹型夹紧件的安全要求 | Connecting devices--Safety requirements for screw-type and screwless-type clamping units for electrical copper conductors | IDT IEC 60999:1990 |
| 29.120.30 | K65 | GB 17465.1-1998 | 家用和类似用途的器具耦合器 第一部分: 通用要求 | Appliance couplers for household and similar general purposes Part 1: General requirements | EQV IEC 60320-1:1994 |
| 29.120.30 | K65 | GB 17465.2-1998 | 家用和类似用途的器具耦合器 第二部分: 家用和类似设备用互连耦合器 | Appliance couplers for household and similar general purposes Part 2: Interconnection couplers for household and similar equipment | EQV IEC 60320-2-2:1990 |
| 29.120.01 | K65 | GB 17466-1998 | 家用和类似用途固定式电气装置电器附件外壳的通用要求 | General requirements for enclosures for accessories for household and similar fixed electrcal installations | EQV IEC 60670:1989 |
| 29.240.10 | K43 | GB/T 17467-1998 | 高压/低压预装式变电站 | High-voltage/low-voltage prefabricated substations | EQV IEC 61330:1995 |
| 29.180 | K41 | GB/T 17468-1998 | 电力变压器选用导则 | The guide for choice power transformers | |
| 29.200 | K81 | GB 17478-1998 | 低压直流电源设备的特性和安全要求 | Low-voltage power supply devices,d.c.output-Performance characteristics and safety requirements | EQV IEC 61204:1993 |
| 29.120.60 | K32 | GB/T 17499-1998 | 家用洗衣机电脑程序控制器 | Microcomputer controller for household washing machine | |
| 29.220.30 | K82 | GB/T 17571-1998 | 碱性二次电池和电池组 扣式密封镉镍可充整体电池组 | Alkaline secondary cells and batteries sealed nickel--Cadmium rechargeable monobloc batteries in button cell design | IDT IEC 61150:1992 |
| 29.080.01 | K15 | GB 17620-1998 | 带电作业用绝缘硬梯通用技术条件 | General specification for insulating rigid ladder for live working | |
| 29.080.01 | K15 | GB 17622-1998 | 带电作业用绝缘手套 通用技术条件 | General specification for insulating Gloves for live working | EQV IEC 60903:1988 |
| 29.020 | K65 | GB 17647-1998 | 工业干洗机安全要求 | Safety requirements for commercial dry-cleaning machines | NEQ UL 664:1993 |
| 29.035.01 | K15 | GB/T 17648-1998 | 绝缘液体 局部放电起始电压测定 试验程序 | Insulating liquids-Determination of the partial discharge inception voltage (PDIV)-Test procedure | EQV IEC 61294:1993 |
| 29.060.01 | K13 | GB/T 17650.1-1998 | 取自电缆或光缆的材料燃烧时释出气体的试验方法 第1部分: 卤酸气体总量的测定 | Test on gases evolved during combustion of materials from cable Part 1: Determination of the amount of halogen acid gas | IDT IEC 60754-1:1994 |
| 29.060.01 | K13 | GB/T 17650.2-1998 | 取自电缆或光缆的材料燃烧时释出气体的试验方法 第2部分: 用测量pH值和电导率来测定气体的酸度 | Test on gases evolved during combustion of materials from cable Part 2: Determination of degree of acidity of gases by measuring pH and conductivity | IDT IEC 60754-2:1991 |
| 29.060.01 | K13 | GB/T 17651.1-1998 | 电缆或光缆在特定条件下燃烧的烟密度测定 第1部分: 试验装置 | Measurement of smoke density of cables burning under defined conditions Part 1: Test apparatus | IDT IEC 61034-1:1997 |
| 29.060.01 | K13 | GB/T 17651.2-1998 | 电缆或光缆在特定条件下燃烧的烟密度测定 第2部分: 试验步骤和要求 | Measurement of smoke density of cables burning under defined conditions Part 2: Test procedure and requirements | IDT IEC 61034-2:1997 |
| 29.120.60 | K31 | GB 17701-1999 | 设备用断路器 | Circuit-breaker for equipment | IDT IEC 60934:1993 |
| 29.120.99 | K32 | GB 17885-1999 | 家用及类似用途机电式接触器 | Electromechanical contactors for household and similar purposes | IDT IEC 61095:1992 |
| 29.140.10 | K74 | GB 17935-1999 | 螺口灯座 | Edison screw lampholders | IDT IEC 60238:1996 |
| 29.140.10 | K74 | GB 17936-1999 | 卡口灯座 | Bayonet lampholders | IDT IEC 61184:1997 |
| 29.060.10 | K11 | GB/T 17937-1999 | 电工用铝包钢线 | Aluminium-clad steel wires for electrical purposes | IDT IEC 61232:1993 |
| 29.220.20 | J83 | GB/T 17938-1999 | 工业车辆 电动车辆牵引用铅酸蓄电池 优先选用的电压 | Industrial trucks--Lead-acid traction batteries for electric trucks--Preferred voltages | IDT ISO 1044:1993 |
| 29.160.01 | K20 | GB/T 17948.1-2000 | 旋转电机绝缘结构功能性评定 散绕绕组试验规程 热评定与分级 | Rotating electrical machines Functional evaluation of insulation systems test procedures for wire-wound windings--Thermal evaluation and classification | IDT IEC 60034-18-21:1992 |
| 29.020 | K60 | GB/T 17949.1-2000 | 接地系统的土壤电阻率、接地阻抗和地面电位测量导则 第1部分: 常规测量 | Guide for measuring earth resistivity,Ground impedance,and earth surface potentials of a ground system Part 1: Normal measurements | |
| 29.200 | K46 | GB/T 17950-2000 | 半导体变流器 第6部分: 使用熔断器保护半导体变流器防止过电流的应用导则 | Semiconductor converter--Part 6: Application guide for the protection of semiconductor converters against overcurrent by fuses | IDT IEC 60146-6:1992 |
| 29.030 | L19 | GB/T 17951-2000 | 硬磁材料一般技术条件 | Standard specifications for magnetically hard materials | IDT IEC 60404-8-1:1986 |
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
国際整合 |
| 29.060.10 | K12 | GB 18014-1999 | 电雷管引爆用聚氯乙烯绝缘电线 | PVC insulated wires for ignition of electric detonators | |
| 29.060.20 | K13 | GB/T 18015.1-1999 | 数字通信用对绞或星绞多芯对称电缆 第1部分: 总规范 | Multicore and symmetrical pair/quad cables for digital communications--Part 1: Generic specification | IDT IEC 61156-1:1994 |
| 29.060.20 | K13 | GB/T 18015.2-1999 | 数字通信用对绞或星绞多芯对称电缆 第2部分: 水平层布线电缆分规范 | Multicore and symmetrical pair/quad cables for digital communications--Part 2: Horizontal floor wiring--Sectional specification | IDT IEC 61156-2:1995 |
| 29.060.20 | K13 | GB/T 18015.3-1999 | 数字通信用对绞或星绞多芯对称电缆 第3部分: 水平层布线电缆空白详细规范 | Multicore and symmetrical pair/quad cables for digital communications--Part 3: Horizontal floor wiring--Blank detail specification | IDT IEC 61156-2-1:1995 |
| 29.060.20 | K13 | GB/T 18015.4-1999 | 数字通信用对绞或星绞多芯对称电缆 第4部分: 工作区布线电缆分规范 | Multicore and symmetrical pair/quad cables for digital communications--Part 4: Work area wiring--Sectional specification | IDT IEC 61156-3:1995 |
| 29.060.20 | K13 | GB/T 18015.5-1999 | 数字通信用对绞或星绞多芯对称电缆 第5部分: 工作区布线电缆空白详细规范 | Multicore and symmetrical pair/quad cables for digital communications--Part 5: Work area wiring--Blank detail specification | IDT IEC 61156-3-1:1995 |
| 29.060.20 | K13 | GB/T 18015.6-1999 | 数字通信用对绞或星绞多芯对称电缆 第6部分: 垂直布线电缆分规范 | Multicore and symmetrical pair/quad cables for digital communications--Part 6: Riser cables--Sectional specification | IDT IEC 61156-4:1995 |
| 29.060.20 | K13 | GB/T 18015.7-1999 | 数字通信用对绞或星绞多芯对称电缆 第7部分: 垂直布线电缆空白详细规范 | Multicore and symmetrical pair/quad cables for digital communications--Part 7: Riser cables--Blank detail specification | IDT IEC 61156-4-1:1995 |
| 29.240.20 | K47 | GB/T 18037-2000 | 带电作业工具基本技术要求与设计导则 | Technical requirements and design guide for live working tools | |
| 29.280 | K63 | GB/T 18038-2000 | 电气化铁道牵引供电系统微机保护装置通用技术条件 | General specification of microprocessor-based protection equipment for electrified railway traction power supply system | |
| 29.160.20 | K24 | GB 18211-2000 | 微电机安全通用要求 | General requirements for safety of electrical micro machines | |
| 29.060.20 | K13 | GB/T 18212-2000 | 户内装置用电缆最大外径的计算 | Calculation of maximum external diameter of cables for indoor installations | IDT IEC 60649:1979 |
| 29.060.20 | K13 | GB/T 18213-2000 | 低频电缆和电线无镀层和有镀层铜导体电阻计算导则 | Guide to the calculation of resistance of plain and coated copper conductor of low-frequency cables and wires | IDT IEC 60344:1980 |
| 29.240.10 | K47 | GB 18269-2000 | 交流1kV、直流1.5kV及以下电压带电作业用绝缘手工工具 | Insulating hand tools for live working up to 1000V a.c and 1500V d.c | EQV IEC 60900:1995 |
| 29.220.30 | K84 | GB/T 18270-2000 | 镉镍开口蓄电池用电解液 | Electrolyte for vented nickel-cadmium cells | IDT IEC 60993:1989 |
| 29.220.01 | K82 | GB/T 18287-2000 | 蜂窝电话用锂离子电池总规范 | General specification of lithium-ion battery for cellular phone | |
| 29.220.30 | K82 | GB/T 18288-2000 | 蜂窝电话用金属氢化物镍电池总规范 | General specification of nickel-metal hydride battery for cellular phone | |
| 29.220.30 | K82 | GB/T 18289-2000 | 蜂窝电话用镉镍电池总规范 | General specification of nickel-cadmium battery for cellular phone | |
| 29.120.20 | L24 | GB/T 18290.2-2000 | 无焊连接 第2部分: 无焊压接连接 一般要求、试验方法和使用导则 | Solderless connections Part 2: Solderless crimped connections--General requirements, test methods and practical guidance | IDT IEC 60352-2:1996 |
| 29.120.20 | L24 | GB/T 18290.3-2000 | 无焊连接 第3部分: 可接触无焊绝缘位移连接 一般要求、试验方法和使用导则 | Solderless connections Part 3: Solderless accessible insulation displacement connections--General requirements,test methods and practical guidance | IDT IEC 60352-3:1993 |
| 29.120.20 | L24 | GB/T 18290.4-2000 | 无焊连接 第4部分: 不可接触无焊绝缘位移连接 一般要求、试验方法和使用导则 | Solderless connections Part 4: Solderless non-accessible insulation displacement connections--General requirements,test methods and practical guidance | IDT IEC 60352-4:1994 |
| 29.120.20 | L24 | GB/T 18290.5-2000 | 无焊连接 第5部分: 无焊压入式连接 一般要求、试验方法和使用导则 | Solderless connections Part 5: Solderless press-in connections--General requirements,test methods and practical guidance | IDT IEC 60352-5:1995 |
| 29.220.20 | K84 | GB/T 18332.1-2001 | 电动道路车辆用铅酸蓄电池 | Lead-acid batteries for electric vehicles | |
| 29.220.30 | K84 | GB/T 18332.2-2001 | 电动道路车辆用金属氢化物镍蓄电池 | Nickel-metal hydride batteries of electric road vehicles | |
| 29.220.30 | K84 | GB/T 18333.1-2001 | 电动道路车辆用锂离子蓄电池 | Lithium-ion batteries for electric road vehicles | |
| 29.220.30 | K84 | GB/T 18333.2-2001 | 电动道路车辆用锌空气蓄电池 | Zinc-air batteries for electric road vehicles | |
| 29.060.20 | K13 | GB/T 18380.1-2001 | 电缆在火焰条件下的燃烧试验 第1部分: 单根绝缘电线或电缆的垂直燃烧试验方法 | Tests on electric cables under fire conditions Part 1: Test on a single vertical insulated wire or cable | IDT IEC 60332-1:1993 |
| 29.060.20 | K13 | GB/T 18380.2-2001 | 电缆在火焰条件下的燃烧试验 第2部分: 单根铜芯绝缘细电线或电缆的垂直燃烧试验方法 | Tests on electric cables under fire conditions Part 2: Test on a single amall vertical insulated copper wire or cable | IDT IEC 60332-2:1989 |
| 29.060.20 | K13 | GB/T 18380.3-2001 | 电缆在火焰条件下的燃烧试验 第3部分: 成束电线或电缆的燃烧试验方法 | Tests on electric cables under fire conditions Part 3: Test on bunched wires or cables | IDT IEC 60332-3:1992 |
| 29.035.01 | K15 | GB/T 18381-2001 | 电工用热固性树脂工业硬质层压板规范 定义、命名和一般要求 | Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes definitions,designations and general requirements | EQV IEC 60893-1:1987 |
| 29.060.10 | T36 | GB/T 18487.1-2001 | 电动车辆传导充电系统一般要求 | Electric vehicle conductive charging system--Part 1: General requirements | EQV IEC 61851-1:2001 |
| 29.060.10 | T36 | GB/T 18487.2-2001 | 电动车辆传导充电系统 电动车辆与交流/直流电源的连接要求 | Electric vehicle conductive charging system--Electric vehicles requirements for Conductive connection to an A.C/D.C.supply | IDT IEC 61851-2-1:1999 |
| 29.060.10 | T36 | GB/T 18487.3-2001 | 电动车辆传导充电系统 电动车辆交流/直流充电机(站) | Electric vehicle conductive charging system A.C./D.Electric vehicle charging station | EQV IEC61851-2-2 - 3:1999 |
| 29.140.30 | K74 | GB 18489-2001 | 管形荧光灯和其他放电灯线路用电容器一般要求和安全要求 | Capacitors for use in tubular fluorescent and other discharge lamp circuits general and safety requirements | IDT IEC 61048:1999 |
| 29.180 | K41 | GB/T 18494.1-2001 | 变流变压器 第1部分：工业用变流变压器 | Convertor transformers--Part 1: Transformers for industrial applications | IDT IEC 61378-1:1997 |
| 29.120.50 | K31 | GB 18499-2001 | 家用和类似用途的剩余电流动作保护器（RCD）--电磁兼容性 | Residual current operated protective devices(RCD) for household and similar use--Electromagnetic compatibility | IDT IEC 61543:1995 |
| 29.140.30 | K71 | GB/T 18504-2001 | 管形荧光灯和其他放电灯线路用电容器性能要求 | Capacitors for use in tubular fluorescent and other discharge lamp circuits Performance requirements | EQV IEC 61049:1991 |
| 29.140 | L06 | GB/T 18595-2001 | 一般照明用设备电磁兼容抗扰度要求 | Equipment for general lighting purposes--EMC immunity requirements | IDT IEC 61547:1995 |
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
国際整合 |
ご意見、ご要望、ご質問 は、