中国国家標準(GB,GB/T規格)
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) |  規格名称(英語) |
国際整合 |
|---|---|---|---|---|---|
| 23.020.30 | J74 | GB 150-1998 | 钢制压力容器 | Steel pressure vessels | |
| 23.020.30 | J74 | GB 151-1999 | 管壳式换热器 | Tubular heat exchangers | |
| 23.040.90 | J15 | GB/T 1047-1995 | 管道元件的公称通径 | Nominal size for pipe components | NEQ ISO 6708-80 |
| 23.040.90 | J15 | GB/T 1048-1990 | 管道元件公称压力 | Nominal pressure for pipe components | |
| 23.040.70 | G42 | GB/T 1186-1992 | 压缩空气用橡胶软管 (2.5 Mpa 以下) | Rubber hose for compressed air (up to 2.5 Mpa) | NEQ ISO 2398-87 |
| 23.120 | J72 | GB/T 1236-2000 | 工业通风机 用标准化风道进行性能试验 | Industrial fans--Performance testing using standardized airways | IDT ISO 5801:1997 |
| 23.100.30 | U52 | GB/T 1241-1983 | 船用外螺纹锻钢截止止回阀 | Marine forged steel male thread stop and check valves | |
| 23.040.15 | H62 | GB/T 1527-1997 | 铜及铜合金拉制管 | Drawn tube of copper and copper alloys | |
| 23.040.15 | H62 | GB/T 1531-1994 | 铜及铜合金毛细管 | Capillary tube of copper and copper alloys | |
| 23.020.30 | J98 | GB/T 1921-1988 | 工业蒸汽锅炉 参数系列 | Specifications for industrial steam boiler | |
| 23.100 | J20 | GB/T 2346-1988 | 液压气动系统及元件 公称压力系列 | Fluid power systems and components--Nominal pressures | NEQ ISO/DP 2944-84 |
| 23.100 | J20 | GB/T 2347-1980 | 液压泵及马达公称排量系列 | Hydraulic fluid power--Pumps and motors -- Geometric displacements | |
| 23.100 | J20 | GB/T 2348-1993 | 液压气动系统及元件 缸内径及活塞杆外径 | Fluid power systems and components--Cylinder bores and piston rod diameters | NEQ ISO 3320-1987 |
| 23.100 | J20 | GB/T 2349-1980 | 液压气动系统及元件 缸活塞行程系列 | Fluid power systems and components--Cylinders--Basic series of piston strokes | |
| 23.100 | J20 | GB/T 2350-1980 | 液压气动系统及元件 活塞杆螺纹型式和尺寸系列 | Fluid power systems and components--Cylinders--Piston rod thread dimensions and types | |
| 23.100 | J20 | GB/T 2351-1993 | 液压气动系统用硬管外径和软管内径 | Fluid power systems and components--Connectors and associated components--Outside diameters of tubes and inside diameters of hoses | NEQ ISO 4397-78 |
| 23.100.01 | J20 | GB/T 2352-1997 | 液压传动 隔离式蓄能器 压力和容积范围、特征量及标识 | Hydraulic fluid power--Gas-loaded accumulators with separators--Range of pressures and volumes,characteristic quantities and identification | EQV ISO 5596:1982 |
| 23.100.10 | K13 | GB/T 2353.1-1994 | 液压泵和马达 安装法兰和轴伸的尺寸系列及标记 第一部分: 二孔和四孔法兰和轴伸 | Hydraulic fluid power--Positive displacement pumps and motors--Dimensions and identification code for mounting flanges and shaft ends--Part 1: Two-and four-hole flanges and shaft ends | NEQ ISO 3019/2-86 |
| 23.100.10 | J20 | GB/T 2353.2-1993 | 液压泵和马达 安装法兰与轴伸的尺寸系列和标记(二) 多边形法兰(包括圆形法兰) | Hydraulic fluid power--Positive displacement pumps and motors--Dimensions and identification code for mounting flanges and shaft ends--Part 2: Polygonal flanges(including circular flanges) | NEQ ISO 3019/3-1988 |
| 23.100.30 | J20 | GB/T 2514-1993 | 四油口板式液压方向控制阀安装面 | Hydraulic fluid power--Four-port directional control valves--Mounting surfaces | EQV ISO 4401-80 |
| 23.040.70; | G42 | GB/T 2550-1992 | 焊接及切割用橡胶软管 氧气橡胶软管 | Specification for hose for equipment for gas welding, cutting and related processes - Oxygen rubber hose | NEQ ISO 3821-77 |
| 23.040.70; | G42 | GB/T 2551-1992 | 焊接及切割用橡胶软管 乙炔橡胶软管 | Specification for hose for equipment for gas welding, cutting and related processes - Acetylene rubber hose | NEQ ISO 3821-77 |
| 23.040.60 | J15 | GB/T 2555-1981 | 一般用途管法兰连接尺寸 | Pipe flange connectors for ordinary use--Mounting dimensions | IDT ISO 2441-75 |
| 23.040.60 | J15 | GB/T 2556-1981 | 一般用途管法兰密封面形状和尺寸 | Pipe flanges for ordinary use--Sealing surfaces--Forms and dimensions | IDT ISO 2441-75 |
| 23.120 | L33 | GB/T 2658-1995 | 小型交流风通用机技术条件 | A.C. miniature blowers, general specification for | NEQ MIL B 23071B-72 |
| 23.080 | J71 | GB/T 2817-1991 | 井用潜水泵技术条件 | Specification for submersible pumps for deep well | |
| 23.060 | J20 | GB/T 2877-1981 | 二通插装式液压阀安装连接尺寸 | Hydraulic fluid power--Two-port slip-in cartridge valves cavities--Mounting dimensions | |
| 23.100.30 | J20 | GB/T 2878-1993 | 液压元件螺纹连接 油口型式和尺寸 | Fluid power systems and components--Ports--Dimensions and design | NEQ ISO 6149-1980 |
| 23.100.20 | J20 | GB/T 2879-1986 | 液压缸活塞和活塞杆 动密封沟槽型式、尺寸和公差 | Hydraulic fluid power--Cylinder rod and piston seals for reciprocating applications--Dimensions and tolerances of housings | NEQ ISO 5597-81 |
| 23.100.20 | J20 | GB/T 2880-1981 | 液压缸活塞和活塞杆 窄断面动密封沟槽尺寸系列和公差 | Hydraulic fluid power--Cylinder rod and piston seals for reciprocating applications--Dimensions and tolerances of housings--Narrow section series | |
| 23.040.15; | H62 | GB/T 2882-1981 | 镍及镍铜合金管 | Nickel and nickel-copper alloy tube | NEQ DIN 17751-73 |
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
国際整合 |
| 23.040.30 | Q14 | GB/T 3039-1994 | 石棉水泥输水管及其接头 | Asbestos-cement pressure pipes and joints for water | NEQ ISO 160-80 |
| 23.040.30 | Q14 | GB/T 3040-1982 | 石棉水泥输煤气管 | Asbestos-cement pressure pipe for gas transmission | |
| 23.040.30 | Q14 | GB/T 3041-1982 | 石棉水泥井管 | Asbestos-cement pipe for well casing | |
| 23.040.10; | H48 | GB/T 3089-1982 | 不锈耐酸钢极薄壁无缝钢管 | Thinnest-wall seamless tubes of stainless and acid-resistance steel | |
| 23.040.10 | H48 | GB/T 3091-2001 | 低压流体输送用焊接钢管 | Welded steel pipe for low pressure liquid delively | NEQ ISO 559-1991 |
| 23.160 | J78 | GB/T 3163-1993 | 真空技术术语 | Terminology for vacuum technology | NEQ ISO 3529-81 |
| 23.160 | J78 | GB/T 3164-1993 | 真空技术系统图用图形符号 | Vacuum technology--Graphical symbols | NEQ ISO 3753 |
| 23.080 | J71 | GB/T 3214-1991 | 水泵流量的测定方法 | Methods for measurement of capacity of pump | |
| 23.080 | J71 | GB/T 3215-1982 | 炼厂、化工及石油化工流程用离心泵通用技术条件 | Centrifugal pumps for refinery, chemical and petrochemical processes--General technical specifications | |
| 23.080 | J71 | GB/T 3216-1989 | 离心泵、混流泵、轴流泵和旋涡泵试验方法 | Test methods for centrifugal, mixed flow, axial and regenerative pumps | EQV ISO 2548-73 |
| 23.120 | J72 | GB/T 3235-1999 | 通风机基本型式、尺寸参数及性能曲线 | Basic types sizes parameters and characteristics of fans | |
| 23.040.40 | J15 | GB/T 3287-2000 | 可锻铸铁管路连接件 | Malleable cast iron pipe fittings | EQV ISO 49:1994 |
| 23.040.10 | H41 | GB/T 3420-1982 | 灰口铸铁管件 | Gray iron castigs for pipe fittings | |
| 23.040.10 | H41 | GB/T 3421-1982 | 砂型离心铸铁管 | Cast-iron pressure pipe centrifugally cast in sand-lined molds | |
| 23.040.10 | H41 | GB/T 3422-1982 | 连续铸铁管 | Cast-iron pressure pipe made by continuous casting process | |
| 23.040.80 | G43 | GB 3452.1-1992 | 液压气动用O形橡胶密封圈尺寸系列及公差 | Fluid systems--Sealing devices--O-rings--Inside diameters, cross-sections, tolerances and size identification code | NEQ ISO 3601.1-1988 |
| 23.040.80 | G43 | GB/T 3452.2-1987 | O 形橡胶密封圈外观质量检验标准 | Appearance quality acceptance criteria for rubber O-rings | NEQ ISO/DP 3601/3-87 |
| 23.040.80 | G43 | GB/T 3452.3-1988 | 液压气动用O形橡胶密封圈 沟漕尺寸和设计计算 | Fluid power systems--O-ring--Design criteria for O-ring housing--Basic calculation | NEQ IDO/DIS 3601/2 |
| 23.100.20 | H72 | GB/T 3456-1982 | 硬质合金顶锤与压缸 | Anvils and high pressure cylinders made from cemented carbide | |
| 23.040.70 | H48 | GB/T 3641-1983 | P3型镀锌金属软管 | Type p3 galvanized metallic flexible hose | |
| 23.040.70 | H48 | GB/T 3642-1983 | S型钎焊不锈钢金属软管 | Type S brazed stainless steel flexible metallic hose | |
| 23.040.70; | G42 | GB/T 3683-1992 | 钢丝增强液压橡胶软管和软管组合件 | Rubber hoses and hose assemblies--Wire reinforced hydraulic type | NEQ ISO/DIS 1436-1985 |
| 23.100.01 | J20 | GB/T 3766-2001 | 液压系统通用技术条件 | Hydraulic fluid power--General rules relating to systems | EQV ISO 4413:1998 |
| 23.140 | J72 | GB/T 3853-1998 | 容积式压缩机验收试验 | Displacement compressor-Acceptance tests | EQV ISO 1217:1996 |
| 23.100 | J19 | GB/T 3858-1993 | 液力传动术语 | Hydrodynamic drive terminology | |
| 23.100.30 | N16 | GB/T 4213-1992 | 气动调节阀 | Pneumatic industrial process control valves | |
| 23.040.20 | G33 | GB/T 4217-2001 | 流体输送用热塑性塑料管材 公称外径和公称压力 | Thermoplastics pipes for the conveyance of fluids--Nominal outside diameters and nominal pressures | IDT ISO 161.1:1996 |
| 23.040.20 | Y28 | GB/T 4219-1996 | 化工用硬聚氯乙烯(PVC-U)管材 | Unplasticized polyvinyl chloride (PVC-U) pipes for chemical industry | |
| 23.040.15 | H61 | GB/T 4436-1995 | 铝及铝合金管材外形尺寸及允许偏差 | Wrought aluminium and aluminium alloy tubes--Dimensions and deviations | |
| 23.040.15 | H61 | GB/T 4437.1-2000 | 铝及铝合金热挤压管 第一部分: 无缝圆管 | Aluminium and aluminium alloy extruded tubes--Part 1: Seamless tubes | |
| 23.040.80 | Q61 | GB/T 4620-1984 | 缠绕式垫片水压密封性能试验方法 | Spiral wound gaskets test method of hydraulic pressure sealing characteristics | |
| 23.040.80 | Q61 | GB/T 4621-1984 | 缠绕式垫片蒸汽密封性能试验方法 | Spiral wound gaskets test method of steam sealing characteristics | |
| 23.040.80 | Q24 | GB/T 4622.1-1993 | 缠绕式垫片 分类 | Specification and symbol of spiral wound gaskets | |
| 23.040.80 | Q24 | GB/T 4622.2-1993 | 缠绕式垫片 管法兰尺寸系列 | Dimensional series of spiral wound gaskets for pipe flanges | |
| 23.040.80 | Q24 | GB/T 4622.3-1993 | 缠绕式垫片 技术条件 | Specification of spiral wound gaskets | |
| 23.140 | J04 | GB/T 4974-1989 | 压缩机、凿岩机械与气动工具优先压力 | Compressors, rock drilling machines and pneumatic tools - Preferred pressures | |
| 23.140 | J72 | GB/T 4975-1995 | 容积式压缩机术语 总则 | Displacement compressors vocabulary--General | EQV ISO 3857-1977 |
| 23.140 | J72 | GB/T 4976-1985 | 压缩机分类 | Compressors--Classification | IDT ISO 5390-77 |
| 23.140 | J72 | GB/T 4980-1985 | 容积式压缩机噪声声功率级的测定--工程法 | Determination of sound power level for noise emitted by displacement compressors--Engineering method | |
| 23.040.60 | J15 | GB/T 4982-1985 | 夹紧型真空快卸法兰 | Vacuum technology clamped type quick release flange | IDT ISO 2861/1-74 |
| 23.040.60 | J78 | GB/T 4983-1985 | 拧紧型真空快卸法兰 | Vacuum technology screwed type quick release flange | EQV ISO 2861/2-80 |
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
国際整合 |
| 23.020.30 | J76 | GB 5099-1994 | 钢质无缝气瓶 | Seamless steel gas cylinders | NEQ ISO 4705-83 |
| 23.020.30 | J74 | GB 5100-1994 | 钢质焊接气瓶 | Welded steel gas cylinders | |
| 23.040.10 | H48 | GB 5310-1995 | 高压锅炉用无缝钢管 | Seamless steel tubes and pipes for high pressure boiler | NEQ ASTM A335-90 |
| 23.040.70 | G42 | GB/T 5563-1994 | 橡胶、塑料软管及软管组合件 液压试验方法 | Rubber and plastics hoses and hose assemblies--Hydrostatic testing | NEQ ISO/DIS 1402-91 |
| 23.040.70 | G42 | GB/T 5564-1994 | 橡胶、塑料软管低温曲挠试验 | Rubber and plastics hoses--Subambient temperature flexibility tests | NEQ ISO 4672-88 |
| 23.040.70 | G42 | GB/T 5565-1994 | 橡胶或塑料软管及纯胶管 弯曲试验 | Rubber or plastics hoses and tubing--Bending tests | NEQ ISO 1747-83 |
| 23.040.70 | G42 | GB/T 5566-1985 | 胶管耐压扁试验方法 | Rubber hose--Test method for crush resistance | NEQ ISO 2929-75 |
| 23.040.20 | G42 | GB/T 5567-1994 | 橡胶、塑料软管及软管组合件 真空性能的测定 | Rubber and plastics hoses and hose assemblies--Determination of suction resistance | NEQ ISO/DIS 7233-90 |
| 23.040.20 | G42 | GB/T 5568-1994 | 橡胶、塑料软管及软管组合件 无屈挠液压脉冲试验 | Rubber or plastics hoses and hose assemblies--Hydraulic impulse test without flexing | NEQ ISO/DIS 6803-91 |
| 23.040.60 | J15 | GB/T 5625.1-1985 | 扩口式端直通管接头 | Flared type tube fittings--Straight thread connector--Assembly | |
| 23.040.60 | J15 | GB/T 5625.2-1985 | 扩口式端直通管接头体 | Flared type tube fittings--Straight thread connector--Body | |
| 23.040.60 | J15 | GB/T 5626.1-1985 | 扩口式锥螺纹直通管接头 | Flared type tube fittings--Male connector--Assembly | |
| 23.040.60 | J15 | GB/T 5626.2-1985 | 扩口式锥螺纹直通管接头体 | Flared type tube fittings--Male connector--Body | |
| 23.040.60 | J15 | GB/T 5627.1-1985 | 扩口式锥螺纹长管接头 | Flared typed tube fittings--Straight taread long connector--Assembly | |
| 23.040.60 | J15 | GB/T 5627.2-1985 | 扩口式锥螺纹长管接头体 | Flared type tube fittings--Straight thread long connector--Body | |
| 23.040.60 | J15 | GB/T 5628.1-1985 | 扩口式直通管接头 | Flared type tube fittings--Union--Assembly | |
| 23.040.60 | J15 | GB/T 5628.2-1985 | 扩口式直通管接头体 | Flared type tube fittings--Union--Body | |
| 23.040.60 | J15 | GB/T 5629.1-1985 | 扩口式锥螺纹直角管接头 | Flared type tube fittings--Male elbow--Assembly | |
| 23.040.60 | J15 | GB/T 5629.2-1985 | 扩口式锥螺纹直角管接头体 | Flared type tube fittings--Male elbow--Body | |
| 23.040.60 | J15 | GB/T 5630.1-1985 | 扩口式直角管接头 | Flared type tube fittings--Union elbow--Assembly | |
| 23.040.60 | J15 | GB/T 5630.2-1985 | 扩口式直角管接头体 | Flared type tube fittings--Union elbow--Body | |
| 23.040.60 | J15 | GB/T 5631.1-1985 | 扩口式可调向端直角管接头 | Flared type tube fittings--Straight thread elbow-- Assembly | |
| 23.040.60 | J15 | GB/T 5631.2-1985 | 扩口式可调向端直角管接头体 | Flared type tube fittings--Straight thread elbow--Body | |
| 23.040.60 | J15 | GB/T 5632.1-1985 | 扩口式组合直角管接头 | Flared type tube fittings--Swivel elbow--Assembly | |
| 23.040.60 | J15 | GB/T 5632.2-1985 | 扩口式组合直角管接头体 | Flared type tube fittings--Swivel elbow--Body | |
| 23.040.60 | J15 | GB/T 5633.1-1985 | 扩口式可调向端三通管接头 | Flared type tube fittings--Straight thread branch tee--Assembly | |
| 23.040.60 | J15 | GB/T 5633.2-1985 | 扩口式可调向端三通管接头体 | Flared type tube fittings--Straight thread branch tee --Body | |
| 23.040.60 | J15 | GB/T 5634.1-1985 | 扩口式组合直角三通管接头 | Flared type tube fittings--Swivel run tee--Assembly | |
| 23.040.60 | J15 | GB/T 5634.2-1985 | 扩口式组合直角三通管接头体 | Flared type tube fittings--Swivel run tee--Body | |
| 23.040.60 | J15 | GB/T 5635.1-1985 | 扩口式锥螺纹三通管接头 | Flared type tube fittings--Male branch tee--Assembly | |
| 23.040.60 | J15 | GB/T 5635.2-1985 | 扩口式锥螺纹三通管接头体 | Flared type tube fittings--Male branch tee--Body | |
| 23.040.60 | J15 | GB/T 5636.1-1985 | 扩口式变径锥螺纹三通管接头 | Flared type tube fittings--Male branch tee reducer-- Assembly | |
| 23.040.60 | J15 | GB/T 5636.2-1985 | 扩口式变径锥螺纹三通管接头体 | Flared type tube fittings--Male branch tee reducer--Body | |
| 23.040.60 | J15 | GB/T 5637.1-1985 | 扩口式可调向端直角三通管接头 | Flared type tube fittings--Straight thread run tee-- Assembly | |
| 23.040.60 | J15 | GB/T 5637.2-1985 | 扩口式可调向端直角三通管接头体 | Flared type tube fittings--Straight thread run tee-- Body | |
| 23.040.60 | J15 | GB/T 5638.1-1985 | 扩口式组合三通管接头 | Flared type tube fittings--Swivel branch tee--Assembly | |
| 23.040.60 | J15 | GB/T 5638.2-1985 | 扩口式组合三通管接头体 | Flared typed tube fittings--Swivel branch tee--Body | |
| 23.040.60 | J15 | GB/T 5639.1-1985 | 扩口式三通管接头 | Flared type tube fittings--Union tee--Assembly | |
| 23.040.60 | J15 | GB/T 5639.2-1985 | 扩口式三通管接头体 | Flared type tube fittings--Union tee--Boby | |
| 23.040.60 | J15 | GB/T 5640.1-1985 | 扩口式三通变径管接头 | Flared type tube fittings--Union tee reducer--Assembly | |
| 23.040.60 | J15 | GB/T 5640.2-1985 | 扩口式三通变径管接头体 | Flared type tube fittings--Union tee reducer--Body | |
| 23.040.60 | J15 | GB/T 5641.1-1985 | 扩口式四通管接头 | Flared type tube fittings--Union cross--Assembly | |
| 23.040.60 | J15 | GB/T 5641.2-1985 | 扩口式四通管接头体 | Flared type tube fittings--Union cross--Body | |
| 23.040.60 | J15 | GB/T 5642.1-1985 | 扩口式焊接管接头 | Flared type tube fittings--Weld male connector--Assembly | |
| 23.040.60 | J15 | GB/T 5642.2-1985 | 扩口式焊接管接头体 | Flared type tube fittings--Weld male connector--Body | |
| 23.040.60 | J15 | GB/T 5643.1-1985 | 扩口式隔壁直通管接头 | Flared type tube fittings--Bulkhead union--Assembly | |
| 23.040.60 | J15 | GB/T 5643.2-1985 | 扩口式隔壁直通管接头体 | Flared type tube fittings--Bulkhead union--Body | |
| 23.040.60 | J15 | GB/T 5644.1-1985 | 扩口式隔壁直角管接头 | Flared type tube fittings--Bulkhead union elbow--Assembly | |
| 23.040.60 | J15 | GB/T 5644.2-1985 | 扩口式隔壁直角管接头体 | Flared type tube fittings--Bulkhead union elbow--Body | |
| 23.040.60 | J15 | GB/T 5645.1-1985 | 扩口式压力表管接头 | Flared type tube fittings--Connector for pressure gauge--Assembly | |
| 23.040.60 | J15 | GB/T 5645.2-1985 | 扩口式压力表管接头体 | Flared type tube fittings--Connector for pressure gauge--Body | |
| 23.040.60 | J15 | GB/T 5646-1985 | 扩口式管接头管套 | Flared type tube fittings--Sleeve | |
| 23.040.60 | J15 | GB/T 5647-1985 | 扩口式 A 型管接头螺母 | Flared type tube fittings--Style A nut | |
| 23.040.60 | J15 | GB/T 5648-1985 | 扩口式 B 型管接头螺母 | Flared type tube fittings--Style B nut | |
| 23.040.60 | J15 | GB/T 5649-1985 | 扩口式管接头锁紧螺母 | Flared type tube fittings--Locknut | |
| 23.040.60 | J15 | GB/T 5650-1985 | 扩口式管接头空心螺栓 | Flared type tube fittings--Inverted flare bolts | |
| 23.040.60 | J15 | GB/T 5651-1985 | 扩口式管接头密合垫 | Flared type tube fittings--Seat insert | |
| 23.040.60 | J15 | GB/T 5652-1985 | 扩口式管接头锁紧螺母垫圈 | Flared type tube fittings--Back-up washer | |
| 23.040.60 | J15 | GB/T 5653-1985 | 扩口式管接头技术条件 | Specification for flared type tube fittings | |
| 23.080 | J71 | GB/T 5656-1994 | 离心泵技术条件(II类) | Technical specifications for centrifugal pumps--Class II | EQV ISO 5199-86 |
| 23.080 | J71 | GB/T 5657-1995 | 离心泵技术条件(Ⅲ类) | Technical specifications for centrifugal pumps--Class Ⅲ | EQV ISO 9908-1993 |
| 23.080 | J71 | GB/T 5660-1985 | 轴向吸入离心泵底座尺寸和安装尺寸 | End-suction centrifugal pumps--Baseplate and installation dimensions | IDT ISO 3661-77 |
| 23.080 | J71 | GB/T 5661-1985 | 轴向吸入离心泵机械密封和软填料用的空腔尺寸 | End-suction centrifugal pumps--Dimensions of cavities for mechanical seals and for soft packing | IDT ISO 3069-74 |
| 23.080 | J71 | GB/T 5662-1985 | 轴向吸入离心泵 (16 bar) 标记、性能和尺寸 | End-suction centrifugalpumps (rating 16 bar)--Designation, nominal duty point and dimensions | IDT ISO 2858-75 |
| 23.040.30 | Q14 | GB 5695-1994 | 预应力混凝土输水管 (震动挤压工艺) | Prestressed vibrohydropressed concrete pipe for water | |
| 23.040.30 | Q14 | GB 5696-1994 | 预应力混凝土输水管(管芯缠丝工艺) | Core type prestressed concrete pipe for water | |
| 23.140 | J72 | GB/T 5773-1986 | 容积式制冷压缩机性能试验方法 | The methods of performance test for positive displacement refrigerant compressors | EQV ISO 917-74 |
| 23.040.20 | G33 | GB/T 5836.1-1992 | 建筑排水用硬聚氯乙烯管材 | Unplastisized polyvinyl chloride pipes for drainage in buildings | NEQ ISO 3633-91 |
| 23.040.20 | G33 | GB/T 5836.2-1992 | 建筑排水用硬聚氯乙烯管件 | Unplasticized polyvinyl chloride fittings for drainage in buildings | NEQ ISO 3633-91 |
| 23.100 | J19 | GB/T 5837-1993 | 液力偶合器 型式和基本参数 | Fluid coupling--Types and basic specifications | |
| 23.020.30 | J76 | GB 5842-1996 | 液化石油气钢瓶 | Liquefied petroleum gas cylinders | NEQ ISO 4706-89 |
| 23.100.30 | J20 | GB/T 5860-1986 | 液压快换接头尺寸和要求 | Hydraulic fluid power--Quick action couplings--Dimensions and requirements | NEQ ISO/DIS 7241/1.2 |
| 23.100.30 | J20 | GB/T 5861-1986 | 液压快换接头试验方法 | Hydraulic fluid power--Quick action couplings--Test methods | NEQ ISO/DIS 7241/1.2 |
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
国際整合 |
| 23.020.30 | Q23 | GB/T 6058-1985 | 纤维缠绕压力容器制备和内压试验方法 | Method for preparation and internal pressure testing of filament wound pressure vessels | |
| 23.160? | J78 | GB/T 6070-1995 | 真空法兰 | Vacuum flanges | EQV ISO 1609-86 |
| 23.040.60 | J78 | GB/T 6071.1-1985 | 超高真空法兰结构型式 | Ultra-high vacuum flange--Types | |
| 23.040.60 | J78 | GB/T 6071.2-1985 | 超高真空法兰尺寸 | Ultra-high vacuum flange--Dimensions | |
| 23.040.60 | J78 | GB/T 6071.3-1985 | 超高真空法兰用铜密封垫 | Ultra-high vacuum flange--Copper seal gaskets | |
| 23.040.20 | G33 | GB/T 6111-1985 | 长期恒定内压下热塑性塑料管材耐破坏时间的测定方法 | Standard test method for time-to-failure of thermoplastic pipe under constant internal pressure | EQV ISO/DP 1167-78 |
| 23.040.10 | H41 | GB/T 6483-1986 | 柔性机械接口灰口铸铁管 | Soft mechanical joint grey cast iron pipe | NEQ ΓOCT 9583-75 |
| 23.080 | J71 | GB/T 6490.1-1986 | 水轮泵名词术语及定义 | Terms and definitions of water-turbine pumps | NEQ ISO 2548-73 |
| 23.080 | J71 | GB/T 6490.2-1986 | 水轮泵试验方法 | Testing methods of water-turbine pump | NEQ ISO 2548-73 |
| 23.080 | B90 | GB/T 6490.3-1986 | 水轮泵型式与基本参数 | Types and basic parameters of water-turbine pump | |
| 23.100.20 | J20 | GB/T 6577-1986 | 液压缸活塞用带支承环密封沟槽型式、尺寸和公差 | Hydraulic fluid power--Cylinders--Piston seal housings incorporating bearing rings--Dimensions and tolerances | NEQ ISO 6547-81 |
| 23.100.20 | J20 | GB/T 6578-1986 | 液压缸活塞杆用防尘圈沟槽型式、尺寸和公差 | Hydraulic fluid power--Cylinders--Reciprocating--Housings for rod wipers--Dimensions and tolerances | |
| 23.040.20 | G33 | GB/T 6671-2001 | 热塑性塑料管材 纵向回缩率的测定 | Thermoplastics pipes-Determination of longitudinal reversion | EQV ISO 2505-1994 |
| 23.120 | J09 | GB/T 6719-1986 | 袋式除尘器分类及规格性能表示方法 | Classification and specification for bag filters | |
| 23.100 | J20 | GB/T 6821-1986 | 双涡轮液力变矩器主要参数 | Basic parameters of double-turbine torque converter | |
| 23.040.70 | C84 | GB 6969-1986 | 消防吸水胶管性能要求和试验方法 | Rubber suction hose for fire-fighting purpose performance requirements and test methods | |
| 23.080 | J71 | GB/T 7021-1986 | 离心泵名词术语 | Glossary of terms for centrifugal pump | |
| 23.140 | J72 | GB/T 7022-1986 | 容积式压缩机噪声声功率级的测定 简易法 | Determination of sound power level for noise emitted by displacement compressors--Survey method | |
| 23.040.70 | G42 | GB/T 7127.1-2000 | 使用非石油基制动液的道路车辆 液压制动系统用制动软管组合件 | Brake hose assemblies for hydraulic braking systems of road vehicles used with non-petroleum-base brake fluid | EQV ISO 3996:1995 |
| 23.040.70 | G42 | GB/T 7127.2-2000 | 使用石油基制动液的道路车辆 液压制动系统用制动软管组合件 | Brake hose assemblies for hydraulic braking systems of road vehicles used with petroleum-base brake fluid | EQV ISO 6120:1995 |
| 23.040.70 | G42 | GB/T 7129-2001 | 橡胶或塑料软管 容积膨胀的测定 | Rubber or plastics hoses--Determination of volumetric expansion | IDT ISO 6801:1983 |
| 23.020.30 | J74 | GB 7144-1999 | 气瓶颜色标志 | Coloured cylinder mark for gases | |
| 23.040.20 | G31 | GB/T 7155.1-1987 | 热塑性塑料管材及管件密度的测定 第Ⅰ部分: 聚乙烯管材及管件基准密度的测定 | Determination of density of thermoplastic pipes and fittings--Part Ⅰ: Determination of reference density of polyethylene pipes and fittings | NEQ ISO 4451-80 |
| 23.040.20 | G31 | GB/T 7155.2-1987 | 热塑性塑料管材及管件密度的测定 第Ⅱ部分: 聚丙烯管材及管件密度的测定 | Determination of density of thermoplastic pipes and fittings--Part Ⅱ: Determination of density of polypropylene pipes and fittings | NEQ ISO 3477-81 |
| 23.040.90 | C72 | GB 7231-1987 | 工业管路的基本识别色和识别符号 | Basic identification colours and code indications for industrial pipelines | NEQ ISO 508-66 |
| 23.020.30 | J76 | GB 7512-1998 | 液化石油气瓶阀 | Valves for liquefied petroleum gas cylinders | |
| 23.040.70 | G42 | GB/T 7528-1987 | 橡胶软管术语 | Rubber hose--Glossary of terms | NEQ ISO/DP 1382-86 |
| 23.080 | J78 | GB/T 7774-1987 | 涡轮分子泵性能测试方法 | Methods of measurement of the performance characteristics of tubo-molecular pumps | NEQ ISO/DP 5302 |
| 23.140 | J72 | GB/T 7777-1987 | 往复活塞压缩机机械振动测量与评价 | Measurement and evluation of mechanical vibration of reciprocating piston compressors | NEQ ISO 2372-74 |
| 23.100.10 | J71 | GB/T 7782-1996 | 计量泵 | Metering pump | |
| 23.080 | J71 | GB/T 7784-1987 | 机动往复泵试验方法 | Method of testing power reciprocating pump | NEQ JIS B8311-76 |
| 23.080 | J71 | GB/T 7785-1987 | 往复泵分类和名词术语 | Classification and vocabulary for reciprocating pump | NEQ API 5674-86 |
| 23.140 | J72 | GB/T 7787-1987 | 往复活塞空气压缩机基本参数 | Reciprocating piston air compressors--Basic parameters | |
| 23.020.30 | J74 | GB/T 7899-1987 | 焊接、切割及类似工艺用气瓶减压器 | Regulators for gas cylinders used in welding, cutting and allied processes | NEQ ISO 2503-83 |
| 23.100 | J20 | GB/T 7932-1987 | 气动系统通用技术条件 | Pneumatic fluid power--General rules for the application of equipment to transmission and control systems | NEQ ISO 4414-82 |
| 23.100.30 | J20 | GB/T 7934-1987 | 二通插装式液压阀 技术条件 | Hydraulic fluid power--Two-port slip-in cartridge valves--Cavities--Technical requirements | NEQ ISO 4413-84 |
| 23.100.30 | J20 | GB/T 7935-1987 | 液压元件通用技术条件 | Hydraulic fluid power--General rules of technical requirements for hydraulic components | NEQ NFPA T310.3 |
| 23.100.10 | J20 | GB/T 7936-1987 | 液压泵、马达空载排量 测定方法 | Hydraulic fluid power--Positive displacement pumps andmotors--Determination of derived capacity | NEQ ISO/DP 8426 |
| 23.100.30 | J20 | GB/T 7937-1987 | 液压气动用管接头及其附件公称压力系列 | Fluid power systems and components--Connectors and associated components--Nominal pressures | EQV ISO 4399-77 |
| 23.100.20 | J20 | GB/T 7938-1987 | 液压缸及气缸公称压力系列 | Fluid power systems and components--Cylinders--Nominal pressures | NEQ ISO 3322-75 |
| 23.100.30 | J20 | GB/T 7939-1987 | 液压软管总成 试验方法 | Hydraulic fluid power--Hose assemblies--Method of test | NEQ ISO 6605-86 |
| 23.100.30 | J20 | GB/T 7940.1-2001 | 气动 五气口方向控制阀 第一部分: 不带电气接头的安装面 | Pneumatic fluid power--Five-port directional control valves--Part 1: Mounting interface surfaces without electrical connector | IDT ISO 5599-1:1989 |
| 23.100.30 | J20 | GB/T 7940.2-2001 | 气动 五气口方向控制阀 第二部分 带电气接头的安装面 | Pneumatic fluid power--Five-port directional control valves--Part 2: Mounting interface surfaces with optional elettrical connector | IDT ISO 5599-2:1989 |
| 23.100.30 | J20 | GB/T 7940.3-2001 | 气动 五气口方向控制阀 第三部分: 功能识别编码体系 | Pneumatic fluid power--Five-port directional control valves--Part 3: Code system for communication of valve functions | IDT ISO 5599-3:1989 |
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
国際整合 |
| 23.100.30 | J20 | GB/T 8098-1987 | 板式液压流量控制阀安装面 | Hydraulic fluid power--Compensated flow control valves--Mounting surfaces | NEQ ISO/DIS 6263 |
| 23.100.30 | J20 | GB/T 8099-1987 | 液压叠加阀安装面 | Hydraulic fluid power--Modular stack valves--Mounting surfaces | NEQ ISO 4401-80 |
| 23.100.30 | J20 | GB/T 8100-1987 | 板式联接液压压力控制阀(不包括溢流阀)顺序阀、卸荷阀、节流阀和单向阀 安装面 | Hydraulic fluid power--Pressure control valves (excluding pressure relief valves ), sequence valves, unloading valves, throttle valves and check valves--Mounting surfaces | NEQ ISO/DIS 6264 |
| 23.100.30 | J20 | GB/T 8101-1987 | 板式连接液压溢流阀安装面 | Hydraulic fluid power-pressure relief valves--Mounting surfaces | NEQ ISO/DIS 6264 |
| 23.100.20 | J20 | GB/T 8102-1987 | 缸内径8~25mm的单杆气缸安装尺寸 | Pneumatic fluid power--Single rod cylinders--Bores from 8 to 25 mm--Mounting dimensions | NEQ ISO 6432-85 |
| 23.100.30 | J20 | GB/T 8104-1987 | 流量控制阀试验方法 | Hydraulic fluid power--Valves--Testing method of flow control valves | NEQ ISO/DIS 6403 |
| 23.100.30 | J20 | GB/T 8105-1987 | 压力控制阀试验方法 | Hydraulic fluid power--Valves--Testing method of pressure control valves | NEQ ISO/DIS 6403 |
| 23.100.30 | J20 | GB/T 8106-1987 | 方向控制阀试验方法 | Hydraulic fluid power--Valves--Testing method of directional control valves | NEQ ISO/DIS 4411 |
| 23.100.30 | J20 | GB/T 8107-1987 | 液压阀压差 流量特性试验方法 | Hydraulic fluid power--Valves--Method of determining pressure diffrential--Flow characteristics | NEQ ISO/DIS 6403 |
| 23.040.60 | J15 | GB/T 8259-1987 | 卡箍式柔性管接头技术条件 | Specification for flexible coupling of housing | |
| 23.040.60 | J15 | GB/T 8260-1987 | 卡箍式柔性环型管接头 | Flexible coupling of housing for pipe end with rib ring | |
| 23.040.60 | J15 | GB/T 8261-1987 | 卡箍式柔性肩型管接头 | Flexible coupling of housing for pipe end with shoulder | |
| 23.020.30 | J74 | GB 8334-1999 | 液化石油气钢瓶定期检验与评定 | Periodic inspection and evaluation of liquefied petroleum gas steel cylinders | |
| 23.020.30 | J76 | GB 8335-1998 | 气瓶专用螺纹 | Special threads for gas cylinders | |
| 23.020.30 | J76 | GB/T 8336-1998 | 气瓶专用螺纹量规 | Special thread gauges for gas cylinders | |
| 23.020.30 | J76 | GB 8337-1996 | 气瓶用易熔合金塞 | Fusible plug for gas cylinders | |
| 23.060 | Y71 | GB/T 8375-1987 | 水嘴分类、型号命名方法 | Classification and type nomenclature for taps | NEQ JIS B2061-84 |
| 23.060.99 | J16 | GB/T 8464-1998 | 水暖用内螺纹连接阀门 | Valves with female screw ends for water-heating system | |
| 23.100.30 | J20 | GB/T 8606-1988 | 液压快换接头 螺纹连接尺寸及要求 | Hydlaulic fluid power--Quick action couplings--Thread connecting dimensions | |
| 23.100.30 | H48 | GB/T 8713-1988 | 液压和气动缸筒用精密内径无缝钢管 | Inside diameter required precision seamless steel tube for hydraulic and pneumatic cylinder use | NEQ ISO 4394/1-80 |
| 23.040.10 | H48 | GB/T 8714-1988 | 梯唇型橡胶圈接口铸铁管 | Grey cast iron pipes with rubber ring of ladder-lip-shaped | NEQ ISO 13-78 |
| 23.040.10 | H48 | GB/T 8715-1988 | 柔性机械接口铸铁管件 | Soft mechanical joint grey cast iron fittings | NEQ ISO 13-78 |
| 23.040.20 | G33 | GB/T 8801-1988 | 硬聚氯乙烯 (PVC-U) 管件坠落试验方法 | Test method for unplasticized (PVC-U) fittings by falling | |
| 23.040.20 | G33 | GB/T 8802-2001 | 热塑性塑料管材、管件 维卡软化温度的测定 | Thermoplastics pipes and fitting-Determination of vicat softening temperature | EQV ISO 2507-1995 |
| 23.040.20 | G33 | GB/T 8803-2001 | 注射成型硬质聚氯乙烯(PVC-U)、氯化聚氯乙烯(PVC-C)、丙烯腈-丁二烯-苯乙烯三元共聚物(ABS)和丙烯腈-苯乙烯-丙烯酸盐三元共聚物(ASA)管件 热烘箱试验方法 | Injection-moulded unplasticized poly(vinyl chloride)(PVC-U),chlorinated poly(vinyl chloride)(PVC-C),acrylonitrile butadiene-styrene(ABS)and acrylonitrile-styrene-acrylester(ASA)fittings Hot oven test method | |
| 23.040.20 | G33 | GB/T 8804.1-1988 | 热塑性塑料管材拉伸性能试验方法 聚氯乙烯管材 | Test methods of tensile properties for thermoplastic pipes--Polyvinyl chloride (PVC) pipes | EQV ISO/DIS 3504.2 |
| 23.040.20 | G33 | GB/T 8804.2-1988 | 热塑性塑料管材拉伸性能试验方法 聚乙烯管材 | Test methods of tensile properties for thermoplastic pipes--Polyethylene (PE) pipes | EQV ISO/DIS 3504.2 |
| 23.040.20 | G33 | GB/T 8805-1988 | 硬质塑料管材弯曲度测量方法 | Determination of deflection for rigid plastic pipes | NEQ ASTM D2122-81 |
| 23.040.20 | G33 | GB/T 8806-1988 | 塑料管材尺寸测量方法 | Method for dimension measuring of plastic pipes | EQV ISO 3126-74 |
| 23.040.15 | H62 | GB/T 8890-1998 | 热交换器用铜合金无缝管 | Seamless copper alloy tube for condenser and heat-exchanger | NEQ JIS H3300-92 |
| 23.040.15 | H62 | GB/T 8892-1988 | 压力表用锡青铜管 | Bronze tube for pressure-gauge | EQV ΓOCT 2622-75 |
| 23.040.15 | H62 | GB/T 8893-1988 | 矩形和方形铜及铜合金波导管 | Copper and copper alloys--Rectangular and square waveguid tube | EQV IEC 60253-1.2.3 |
| 23.040.15 | H62 | GB/T 8894-1988 | 圆形铜合金波导管 | Copper and copper alloys--Circular waveguid tube | EQV IEC 60153-4 |
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
国際整合 |
| 23.020.30 | J74 | GB/T 9019-2001 | 压力容器公称直径 | Nominal diameter of pressure vessels | |
| 23.100.30 | J15 | GB/T 9065.1-1988 | 液压软管接头 连接尺寸 扩口式 | Hydraulic fluid power--Hose connector--Connecting dimension (Part Ⅰ--Flare type) | |
| 23.100.30 | J15 | GB/T 9065.2-1988 | 液压软管接头 连接尺寸 卡套式 | Hydraulic fluid power--Hose connector--Connecting dimension (Part Ⅱ--Insert type) | |
| 23.100.30 | J15 | GB/T 9065.3-1988 | 液压软管接头 连接尺寸 焊接式或快换式 | Hydraulic fluid power--Hose connector--Connecting dimension (Part Ⅲ--Welding or quick-action type) | |
| 23.040.15 | J74 | GB/T 9082.1-1988 | 无管芯重力热管铝管材 | Aluminium tubes used for wickless gravity heat pipes | |
| 23.040.15 | J74 | GB/T 9082.2-1988 | 铝无管芯重力热管 | Wickless aluminium gravity heat pipes | |
| 23.100.20 | J20 | GB/T 9094-1988 | 液压缸气缸 安装尺寸和安装型式代号 | Fluid power systems and components--Cylinders--Identification code for mounting dimensions and mounting types | NEQ ISO 6099-89 |
| 23.140 | Y61 | GB/T 9098-1996 | 电冰箱用全封闭型电动机--压缩机 | Hermetic motor-compressors for refrigerators | |
| 23.040.60 | J15 | GB/T 9112-2000 | 钢制管法兰 类型与参数 | Types and parameters for steel pipe flanges | |
| 23.040.60 | J15 | GB/T 9113.1-2000 | 平面、突面整体钢制管法兰 | Intergral steel pipe flanges with flat face or raised face | |
| 23.040.60 | J15 | GB/T 9113.2-2000 | 凹凸面整体钢制管法兰 | Integral steel pipe flanges with male and female face | |
| 23.040.60 | J15 | GB/T 9113.3-2000 | 榫槽面整体钢制管法兰 | Integral steel pipe flanges with tongue and groove face | |
| 23.040.60 | J15 | GB/T 9113.4-2000 | 环连接面整体钢制管法兰 | Integral steel pipe flanges with ring-joint face | |
| 23.040.60 | J15 | GB/T 9114-2000 | 突面带颈螺纹钢制管法兰 | Hubbed screwed steel pipe flanges with raised face | |
| 23.040.60 | J15 | GB/T 9115.1-2000 | 平面、突面对焊钢制管法兰 | Steel pipe welding neck flanges with flat face or raised face | |
| 23.040.60 | J15 | GB/T 9115.2-2000 | 凹凸面对焊钢制管法兰 | Steel pipe welding neck flanges with male and female face | |
| 23.040.60 | J15 | GB/T 9115.3-2000 | 榫槽面对焊钢制管法兰 | Steel pipe welding neck flanges with tongue and groove face | |
| 23.040.60 | J15 | GB/T 9115.4-2000 | 环连接面对焊钢制管法兰 | Steel pipe welding neck flanges with ring-joint face | |
| 23.040.60 | J15 | GB/T 9116.2-2000 | 凹凸面带颈平焊钢制管法兰 | Hubbed slip-on-welding steel pipe flanges with male and female face | |
| 23.040.60 | J15 | GB/T 9116.3-2000 | 榫槽面带颈平焊钢制管法兰 | Hubbed slip-on-welding steel pipe flanges with tongue and groove face | |
| 23.040.60 | J15 | GB/T 9116.4-2000 | 环连接面带颈平焊钢制管法兰 | Hubbed slip-on-welding steel pipe flanges with ring-joint face | |
| 23.040.60 | J15 | GB/T 9117.1-2000 | 突面带颈承插焊钢制管法兰 | Hubbed socket welding steel pipe flanges with raised face | |
| 23.040.60 | J15 | GB/T 9117.2-2000 | 凹凸面带颈承插焊钢制管法兰 | Hubbed socket welding steel pipe flanges with male and female face | |
| 23.040.60 | J15 | GB/T 9117.3-2000 | 榫槽面带颈承插焊钢制管法兰 | Hubbed socket welding steel pipe flanges with tongue and groove face | |
| 23.040.60 | J15 | GB/T 9117.4-2000 | 环连接面带颈承插焊钢制管法兰 | Hubbed socket welding steel pipe flanges with ring-joint face | |
| 23.040.60 | J15 | GB/T 9118.2-2000 | 环连接面对焊环带颈松套钢制管法兰 | Loose hubbed steel pipe flanges with welding neck collar with ring-joint face | |
| 23.040.60 | J15 | GB/T 9118.1-2000 | 突面对焊环带颈松套钢制管法兰 | Loose hubbed steel pipe flanges with welding neck collar with raised face | |
| 23.040.60 | J15 | GB/T 9119-2000 | 平面、突面板式平焊钢制管法兰 | Slip-on-welding plate steel pipe flanges with flate face or raised face | |
| 23.040.60 | J15 | GB/T 9120.1-2000 | 突面对焊环板式松套钢制管法兰 | Loose plate steel pipe flanges with welding neck collar with raised face | |
| 23.040.60 | J15 | GB/T 9120.2-2000 | 凹凸面对焊环板式松套钢制管法兰 | Loose plate steel pipe flanges with welding neck collar with male and female face | |
| 23.040.60 | J15 | GB/T 9120.3-2000 | 榫槽面对焊环板式松套钢制管法兰 | Loose plate steel pipe flanges with welding neck collar with tongue and groove face | |
| 23.040.60 | J15 | GB/T 9121.1-2000 | 突面平焊环板式松套钢制管法兰 | Loose plate steel pipe flanges with weld-on collar with raised face | |
| 23.040.60 | J15 | GB/T 9121.2-2000 | 凹凸面平焊环板式松套钢制管法兰 | Loose plate steel pipe flanges with weld-on collar with male and female face | |
| 23.040.60 | J15 | GB/T 9121.3-2000 | 榫槽面平焊环板式松套钢制管法兰 | Loose plate steel pipe flanges with weld-on collar with tongue and groove face | |
| 23.040.60 | J15 | GB/T 9122-2000 | 翻边环板式松套钢制管法兰 | Loose plate steel pipe flanges with lapped end | |
| 23.040.60 | J15 | GB/T 9123.1-2000 | 平面、突面钢制管法兰盖 | Steel pipe blank flanges with flat face or raised face | |
| 23.040.60 | J15 | GB/T 9123.2-2000 | 凹凸面钢制管法兰盖 | Steel pipe blank flanges with male and female face | |
| 23.040.60 | J15 | GB/T 9123.3-2000 | 榫槽面钢制管法兰盖 | Steel pipe blank flanges with tongue and groove face | |
| 23.040.60 | J15 | GB/T 9123.4-2000 | 环连接面钢制管法兰盖 | Steel pipe blank flanges with ring-joint face | |
| 23.040.60 | J15 | GB/T 9124-2000 | 钢制管法兰 技术条件 | Specification for steel pipe flanges | |
| 23.040.80 | J15 | GB/T 9126.1-1988 | 平面型钢制管法兰用石棉橡胶垫片 | Asbestos rubber gaskets for steel pipe flanges with full face | NEQ ISO/DIS 7483 |
| 23.040.80 | J15 | GB/T 9126.2-1988 | 凸面型钢制管法兰用石棉橡胶垫片 | Asbestos rubber gaskets for steel pipe flanges with raised face | NEQ ISO/DIS 7483 |
| 23.040.80 | J15 | GB/T 9126.3-1988 | 凹凸面型钢制管法兰用石棉橡胶垫片 | Asbestos rubber gaskets for steel pipe flanges with male and female face | NEQ ISO/DIS 7483 |
| 23.040.80 | J15 | GB/T 9126.4-1988 | 榫槽面型钢制管法兰用石棉橡胶垫片 | Asbestos rubber gaskets for steel pipe flanges with tongue and groove face | NEQ ISO/DIS 7483 |
| 23.040.80 | J15 | GB/T 9128.1-1988 | 钢制管法兰连接用八角形金属环垫 | Octagonal metallic ring gaskets for steel pipe flanges joints | NEQ ISO/DIS 7483 |
| 23.040.80 | J15 | GB/T 9128.2-1988 | 钢制管法兰连接用椭圆形金属环垫 | Oval metallic ring gaskets for steel pipe flange joints | NEQ ISO/DIS 7483 |
| 23.040.80 | J15 | GB/T 9129-1988 | 钢制管法兰用石棉橡胶垫片技术条件 | Specification for asbestos rubber gaskets for steel pipe flanges | NEQ ISO/DIS 7483 |
| 23.040.80 | J15 | GB/T 9130-1988 | 钢制管法兰连接用金属环垫技术条件 | Specification for metallic ring gaskets for steel pipe flange joints | NEQ ISO/DIS 7483 |
| 23.040.60 | J15 | GB/T 9116.1-2000 | 平面、突面带颈平焊钢制管法兰 | Hubbed slip-on-welding steel pipe flanges with flate face or raised face | |
| 23.080 | J71 | GB/T 9234-1997 | 机动往复泵 | Power reciprocating pump | NEQ API 674 |
| 23.080 | J71 | GB/T 9235-1988 | 蒸汽往复泵试验方法 | Testing methods of steam reciprocating pump | NEQ JIS B8311-76 |
| 23.020.30 | J74 | GB/T 9251-1997 | 气瓶水压试验方法 | Method for hydraulic test of gas cylinders | |
| 23.020.30 | J74 | GB/T 9252-2001 | 气瓶疲劳试验方法 | Method for cycling test of gas cylinders | |
| 23.080 | B91 | GB/T 9481-1988 | 中小型轴流泵 型式与基本尺寸 | Axial-flow pump of medium-small size--Types and basic parameters | NEQ ΓOCT 9366-80 |
| 23.040.70 | G42 | GB/T 9572-2001 | 橡胶和塑料软管及软管组合件 电阻的测定 | Rubber and plastics hoses and hose assemblies--Determination of electrical resistance | IDT ISO 8031:1993 |
| 23.040.70 | G42 | GB/T 9573-1988 | 橡胶、塑料软管和软管组合件尺寸测量方法 | Rubber and plastics hoses and hose assemblies--Methods of measurement of dimensions | IDT ISO 4671-84 |
| 23.040.70 | G42 | GB/T 9574-2001 | 橡胶和塑料软管及软管组合件 试验压力、爆破压力与设计工作压力的比率 | Rubber and plastics hoses and hose assemblies--Ratios of proof and burst pressure to design working pressure | IDT ISO 7751:1991 |
| 23.040.70 | G42 | GB/T 9575-1988 | 橡胶、塑料软管内径尺寸和长度公差 | Rubber and plastics hoses--Bore diameters and tolerances on length | IDT ISO 1307-83 |
| 23.040.70 | G42 | GB/T 9576-2001 | 橡胶和塑料软管及软管组合件 选择、贮存、使用和维护指南 | Rubber and plastics hose and hose assemblies--Guide to selection,use,and maintenance | IDT ISO 8331:1991 |
| 23.040.70 | G42 | GB/T 9577-2001 | 橡胶和塑料软管及软管组合件 标志、包装和运输规则 | Rubber and plastics hose and hose assemblies--Rules for marking,package and transportation | |
| 23.040.20 | G33 | GB/T 9642-1988 | 聚乙烯(PE)管材和管件 根据聚乙烯公称密度和熔体流动速率命名的方法 | Polyethylene (PE) pipes and fittings--Designation of polyethylene based on nominal density and melt flow rate | IDT ISO 4056-78 |
| 23.040.20 | G33 | GB/T 9643-1988 | 聚乙烯(PE)管材和管件 熔体流动速率试验方法 | Polyethylene (PE) pipes and fittings--Determination ofmelt flow rate | EQV ISO 4440-80 |
| 23.040.20 | G33 | GB 9644-1988 | 硬聚氯乙烯(PVC-U) 饮水管材和管件 铅、锡、镉、汞的萃取方法及允许值 | Unplasticized polyvinyl chloride (PVC-U) pipes and fittings for drinking water supply--Extractability of lead, tin, cadmium and mercury occurring as impurities--Test method and pemitted levels | NEQ ISO 6992-86 |
| 23.040.20 | G33 | GB/T 9645-1988 | 硬聚氯乙烯(PVC-U)管材吸水性试验方法 | Unplasticized polyvinyl chloride (PVC-U) pipes--Determination of water absorption | IDT ISO 2508-81 |
| 23.040.20 | G33 | GB/T 9646-1988 | 硬聚氯乙烯(PVC-U)管材耐丙酮性试验方法 | Unplasticized polyvinyl chloride (PVC-U) pipes--Determination of resistance to acetone | EQV ISO 3472-75 |
| 23.040.20 | G33 | GB/T 9647-1988 | 塑料管材耐外负荷试验方法 | Test method for external loading resistance for plastic pipe | NEQ ASTM D2412-77 |
| 23.040.10 | H48 | GB 9948-1988 | 石油裂化用无缝钢管 | Seamless steel tubes for petroleum cracking | |
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
国際整合 |
| 23.040.20 | G33 | GB/T 10002.1-1996 | 给水用硬聚氯乙烯（PVC-U）管材 | Unplasticized polyvinyl chloride (PVC-U) pipe for water supply | NEQ ISO 4422-1990 |
| 23.040.20 | G33 | GB/T 10002.3-1996 | 埋地排污、废水用硬聚氯乙烯（PVC-U）管材 | Unplasticized poly vinyl chlorid (PVC-U) pipes for buried drainage and sewerage systems | NEQ ISO 4435-1991 |
| 23.040.20; | G33 | GB 10010-1988 | 医用软聚氯乙烯管材 | Plasticized polyvinyl chloride (PVC)tubing for medical uses | |
| 23.140 | J73 | GB/T 10079-2001 | 活塞式单级制冷压缩机 | Single-stage reciprocating refrigerant compressors | |
| 23.120 | J73 | GB 10080-2001 | 空调用通风机安全要求 | Safety requirements of fan for air conditioning | EQV BS 848:Part 5:1986 |
| 23.120 | J72 | GB/T 10178-1988 | 通风机现场试验 | Site testing of fams | IDT ISO/DP 5802-85 |
| 23.040.70; | G42 | GB/T 10541-1989 | 近海停泊排吸油橡胶软管的分类、规格和基本技术要求 | Classification, dimension and basic requirements for rubber hose - Oil suction and discharge - Offshore mooring | NEQ ISO/DIS 4670-84 |
| 23.040.70; | G42 | GB 10543-1989 | 飞机地面加油和泄油用橡胶软管 | Rubber hoses for aircraft ground fuelling and defuelling | NEQ BS 3158-85 |
| 23.040.70; | G42 | GB/T 10544-1989 | 钢丝缠绕增强外覆橡胶的液压橡胶软管和软管组合件 | Rubber hoses and hose assemblies - Rubber-covered,spiral wire reinforced, hydraulic type - Specification | EQV ISO/DIS 3862-86 |
| 23.040.70; | G42 | GB 10546-1989 | 液化石油气 (LPG) 橡胶软管 | Liquid petroleum gas rubber hose | EQV ISO 2928-86 |
| 23.040.20 | G33 | GB/T 10798-2001 | 热塑性塑料管材通用壁厚表 | Thermoplastics pipes-Universal wall thickness table | IDT ISO 4065:1996 |
| 23.020.30 | J74 | GB 10877-1989 | 氧气瓶阀 | Valves for oxygen cylinders | |
| 23.020.30 | J74 | GB 10878-1999 | 气瓶锥螺纹丝锥 | Special taps of taper threads for gas cylinders | |
| 23.020.30 | J74 | GB 10879-1989 | 溶解乙炔气瓶阀 | Valves for dissolved acetylene cylinders | NEQ JIS B8244-77 |
| 23.080 | J71 | GB/T 10886-1989 | 三螺杆泵型式与基本参数 | Types and basic parameters of three screw pumps | |
| 23.080 | J71 | GB/T 10887-1989 | 三螺杆泵技术条件 | Technical specifications of three screw pumps | |
| 23.140 | J72 | GB/T 10891-1989 | 空气处理机组安全要求 | Safety requirements for air handling units | |
| 23.140 | J72 | GB 10892-1989 | 固定的空气压缩机 安全规则和操作规程 | Stationary air compressors - Safety rules and code of practice | EQV ISO 5388-81 |
| 23.140 | J72 | GB/T 10893-1989 | 压缩空气干燥器 规范与试验 | Compressed air dryers - Specifications and testing | EQV ISO 7183-86 |
| 23.080 | J01 | GB/T 11057-1989 | 离心式、混流式、轴流式水泵运行管理 | Operational management of centrifugal, mixed flow and axial pumps | |
| 23.040.15 | H62 | GB/T 11092-1989 | 黄铜焊接管 | Welded brass tube | |
| 23.160 | J78 | GB/T 11164-1999 | 真空镀膜设备通用技术条件 | Vacuum coating plant generic specification | |
| 23.080 | J71 | GB/T 11473-1989 | 往复泵 型号编制方法 | The model designation of reciprocating pump | |
| 23.020.30 | G93 | GB 11638-1989 | 溶解乙炔气瓶 | Dissolved acetylene cylinders | NEQ ISO 3807-77(83) |
| 23.020.30 | G93 | GB 11639-1989 | 溶解乙炔气瓶多孔填料技术指标测定方法 | Methods of test for porous mass of dissolved acetylene cylinders | |
| 23.020.30 | J74 | GB/T 11640-2001 | 铝合金无缝气瓶 | Seamless aluminium alloy gas cylinder | |
| 23.020.10 | G93 | GB/T 11849-1989 | 重水罐 | Heavy water tank | |
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
国際整合 |
| 23.120 | F04 | GB 12021.9-1989 | 电风扇电耗限定值及测试方法 | The limited value of energy consumption of electric fans and it's measuring method | |
| 23.020.30 | J74 | GB 12135-1999 | 气瓶定期检验站技术条件 | Technological specifications for periodic inspection station of gas cylinders | |
| 23.020.30 | J76 | GB 12136-1989 | 溶解乙炔气瓶用回火防止器 | Arrester for dissolved acetylene cylinders | |
| 23.020.30 | C65 | GB/T 12137-1989 | 气瓶气密性试验方法 | Method for pneumatic testing of cylinders | |
| 23.120 | C78 | GB/T 12138-1989 | 袋式除尘器性能测试方法 | Measuring method for performance of bag filter | |
| 23.060 | J16 | GB/T 12220-1989 | 通用阀门 标志 | General purpose industrial valves - Marking | IDT ISO 5209-77 |
| 23.060 | J16 | GB/T 12221-1989 | 法兰连接金属阀门 结构长度 | Metal valves for use in flanged pipe systems - Face-to -face and centre-to-face dimensions | NEQ ISO 5752-82 |
| 23.060 | J16 | GB/T 12222-1989 | 多回转阀门驱动装置的连接 | Multi-turn valve actuator attachment | IDT ISO 5210/1~3-82 |
| 23.060 | J16 | GB/T 12223-1989 | 部分回转阀门驱动装置的连接 | Part-turn valve actuator attachment | IDT ISO 5211/1~3-82 |
| 23.060 | J16 | GB/T 12224-1989 | 钢制阀门 一般要求 | General requirements for industrial steel valves | NEQ ANSI B16.34-81 |
| 23.060 | J16 | GB/T 12225-1989 | 通用阀门 铜合金铸件技术条件 | General purpose industrial valves - Specification of copper alloy castings | |
| 23.060 | J16 | GB/T 12226-1989 | 通用阀门 灰铸铁件技术条件 | General purpose industrial valves - Specification of flake graphite iron castings | |
| 23.060 | J16 | GB/T 12227-1989 | 通用阀门 球墨铸铁件技术条件 | General purpose industrial valves - Specification of spheroidal graphite iron castings | |
| 23.060 | J16 | GB/T 12228-1989 | 通用阀门 碳素钢锻件技术条件 | General purpose industrial valves - Specification of carbon steel forgings | NEQ ASTM A105-80 |
| 23.060 | J16 | GB/T 12229-1989 | 通用阀门 碳素钢铸件技术条件 | General purpose industrial valves - Specification of carbon steel castings | NEQ ASTM A216 |
| 23.060 | J16 | GB/T 12230-1989 | 通用阀门 奥氏体钢铸件技术条件 | General purpose industrial valves - Specification of austenitic steel castings | |
| 23.060 | J16 | GB/T 12232-1989 | 通用阀门 法兰连接铁制闸阀 | General purpose industrial valves？Flanged iron gate valves | |
| 23.060 | J16 | GB/T 12233-1989 | 通用阀门 铁制截止阀与升降式止回阀 | General purpose industrial valves - Casting iron globe valves and lift check valves | |
| 23.060 | J16 | GB/T 12234-1989 | 通用阀门 法兰和对焊连接钢制闸阀 | General purpose industrial valves - Flanged and butt-weld steel gate valves | |
| 23.060 | J16 | GB/T 12235-1989 | 通用阀门 法兰连接钢制截止阀和升降式止回阀 | General purpose industrial valves - Flanged steel globe valves and lift check valves | |
| 23.060 | J16 | GB/T 12236-1989 | 通用阀门 钢制旋启式止回阀 | General purpose industrial valves - Steel swing check valves | |
| 23.060 | J16 | GB/T 12237-1989 | 通用阀门 法兰和对焊连接钢制球阀 | General purpose industrial valves--Flanged and butt-weld end steel ball valves | |
| 23.060 | J16 | GB/T 12238-1989 | 通用阀门 法兰和对夹连接蝶阀 | General purpose industrial valves - Flanged and wafer butterfly valves | |
| 23.060 | J16 | GB/T 12239-1989 | 通用阀门 隔膜阀 | General purpose industrial valves - Diaphragm valves | |
| 23.060 | J16 | GB/T 12240-1989 | 通用阀门 铁制旋塞阀 | General purpose industrial valves？Iron plug valves | |
| 23.060 | J16 | GB/T 12241-1989 | 安全阀 一般要求 | Safety valves - General requirements | EQV ISO 4126-84 |
| 23.060 | J16 | GB/T 12242-1989 | 安全阀 性能试验方法 | Performance test methods for safety valves | NEQ ANSI/ASTM PTC25.3-76 |
| 23.060 | J16 | GB/T 12243-1989 | 弹簧直接载荷式安全阀 | Spring loaded safety valves | NEQ JIS B8210-78 |
| 23.060 | J16 | GB/T 12244-1989 | 减压阀一般要求 | General specification for pressure reducing valves | |
| 23.060 | J16 | GB/T 12245-1989 | 减压阀 性能试验方法 | Methods of performance test for pressure reducing valves | |
| 23.060 | J16 | GB/T 12246-1989 | 先导式减压阀 | Pilot-operated reducing valves | |
| 23.060 | J90 | GB/T 12247-1989 | 蒸汽疏水阀 分类 | Automatic steam traps - Classification | IDT ISO 6704-82 |
| 23.060 | J16 | GB/T 12248-1989 | 蒸汽疏水阀 术语 | Automatic steam traps - Definition of technical terms | NEQ ISO 6552-80 |
| 23.060 | J16 | GB/T 12249-1989 | 蒸汽疏水阀 标志 | Automatic steam traps - Marking | NEQ ISO 6553-80 |
| 23.060 | J16 | GB/T 12250-1989 | 蒸汽疏水阀 结构长度 | Automatic steam traps - Face-to-face dimensions | NEQ ISO 6554-80 |
| 23.060 | J16 | GB/T 12251-1989 | 蒸汽疏水阀 试验方法 | Automatic steam traps - Test methods | NEQ ISO 6948-81 |
| 23.020.10 | J74 | GB 12337-1998 | 钢制球形储罐 | Steel spherical tanks | |
| 23.040.80 | J15 | GB/T 12385-1990 | 管法兰用垫片密封性能试验方法 | Test method for sealing characteristics of gaskets for pipe flanges | |
| 23.040.60 | J15 | GB/T 12459-1990 | 钢制对焊无缝管件 | Steel butt-welding seamless pipe fittings | |
| 23.040.80 | J15 | GB/T 12621-1990 | 管法兰垫片 应力松弛试验方法 | Test method for stress relaxation of gaskets for pipe flanges | |
| 23.040.80 | J15 | GB/T 12622-1990 | 管法兰垫片 压缩率及回弹率试验方法 | Test method for compressibility and recorery of gaskets for pipe flanges | |
| 23.040.70 | G42 | GB/T 12721-1991 | 橡胶软管 外胶层耐磨耗性能的测定 | Rubber hoses - Determination of abrasion resistance of the outer cover | IDT ISO 6945-83 |
| 23.040.70 | G42 | GB/T 12722-1991 | 橡胶和塑料软管组合件 屈挠液压脉冲试验(半Ω试验) | Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test (Half omega test) | EQV ISO 8032-87 |
| 23.040.10 | H48 | GB/T 12770-1991 | 机械结构用不锈钢焊接钢管 | Welded stainless steel tubes for machine structure | |
| 23.040.10 | H48 | GB/T 12771-2000 | 流体输送用不锈钢焊接钢管 | Welded stainless steel pipes for liquid delivery | NEQ JIS G3448:1997 |
| 23.040.10 | H48 | GB/T 12772-1999 | 排水用柔性接口铸铁管及管件 | Cast iron pipes and fittings with flexible joint sewerage | NEQ CISPI-301:1990
NEQ ISO 6594 |
| 23.080 | B91 | GB/T 12785-1991 | 潜水电泵试验方法 | Test methods for submersible motor - Pumps | |
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
国際整合 |
| 23.020.30 | J74 | GB/T 13003-1991 | 溶解乙炔气瓶气压试验方法 | Method for pneumatic test of dissolved acetylene cylinders | |
| 23.020.30 | J74 | GB 13004-1999 | 钢质无缝气瓶定期检验与评定 | Periodic inspection and evaluation of seamless steel gas cylinders | |
| 23.020.30 | J74 | GB/T 13005-1991 | 气瓶术语 | Terminology of gas cylinders | |
| 23.080 | J71 | GB/T 13006-1991 | 离心泵、混流泵和轴流泵 汽蚀余量 | NPSH for centrifugal, mixed flow and axial pumps | |
| 23.080 | J71 | GB/T 13007-1991 | 离心泵效率 | Efficiencies for centrifugal pumps | |
| 23.080 | J71 | GB/T 13008-1991 | 混流泵、轴流泵技术条件 | Technical specifications for mixed and axial flow pumps | |
| 23.040.20 | G33 | GB/T 13018-1991 | 聚乙烯(PE)管材 外径和壁厚极限偏差 | Polyethylene (PE) pipes - Tolerances on outside diameters and wall thicknesses | NEQ ISO 3607-77 |
| 23.040.20 | G33 | GB/T 13019-1991 | 聚丙烯(PP)管材 外径和壁厚极限偏差 | Polypropylene (PP) pipes - Tolerances on outside diameters and wall thicknesses | NEQ ISO 3609-77 |
| 23.040.20 | G33 | GB/T 13020-1991 | 硬聚氯乙烯(PVC-U) 管材 - 外径和壁厚极限偏差 | Unplasticized polyvinyl chloride (PVC-U) pipes - Tolerances on outside diameters and wall thicknesses | NEQ ISO 3606-76 |
| 23.020.30 | J74 | GB 13075-1999 | 钢质焊接气瓶定期检验与评定 | Periodic inspection and evaluation of welded steel gas cylinders | |
| 23.020.30 | J74 | GB 13076-1991 | 溶解乙炔气瓶定期检验与评定 | Periodic inspection and evaluation of dissolved acety lene cylinders | |
| 23.020.30 | J74 | GB 13077-1991 | 铝合金无缝气瓶定期检验与评定 | Periodic inspection and evaluation of seamless aluminium alloy gas cylinders | |
| 23.020.10 | E08 | GB/T 13235.1-1991 | 石油和液体石油产品 立式圆筒形金属油罐容积标定法 (围尺法) | Petroleum and liquid petroleum products - Volumetric calibration of vertical cylindrical metal tanks - Strapping method | NEQ ISO/DIS 7507-1 |
| 23.020.10 | E08 | GB/T 13235.2-1991 | 石油和液体石油产品 立式圆筒形金属油罐容积标定法 (光学参比线法) | Petroleum and liquid petroleum products - Volumetric calibration of vertical cylindrical metal tanks - Optical reference line method | NEQ ASTM D4738-90 |
| 23.120 | J72 | GB/T 13274-1991 | 一般用途轴流通风机技术条件 | Technical specification for general purposes axiae fans | |
| 23.120 | J72 | GB/T 13275-1991 | 一般用途离心通风机技术条件 | Technical specification for general purposes centrifugal fans | |
| 23.140 | J72 | GB/T 13276-1991 | 容积式空气压缩机进气滤清消声器 | Intake filter silencers for displacement air compressors | |
| 23.140 | J72 | GB/T 13277-1991 | 一般用压缩空气质量等级 | Compressed air for general use - Quality classes | |
| 23.140 | J72 | GB/T 13278-1991 | 一般用干螺杆空气压缩机技术条件 | Dry screw air compressor for general use - Specifications | |
| 23.140 | J72 | GB/T 13279-1991 | 一般用固定式往复活塞空气压缩机技术条件 | Stationary reciprocating piston air compressor for general use - Specifications | |
| 23.140 | J72 | GB/T 13280-1991 | 工艺流程用螺杆压缩机技术条件 | Screw compressor for the process industry - Specifications | |
| 23.040.60 | H48 | GB/T 13294-1991 | 球墨铸铁管件 | Ductile iron pipe fittings | NEQ ISO 2531-86 |
| 23.040.10 | H48 | GB/T 13295-1991 | 离心铸造球墨铸铁管 | Centrifugal casting ductile iron pipe | NEQ ISO 2531-86 |
| 23.040.10 | H48 | GB 13296-1991 | 锅炉、热交换器用不锈钢无缝钢管 | Seamless stainless steel tubes for boiler and heat exchanger | |
| 23.080 | P97 | GB/T 13333-1991 | 混凝土泵 | Concrete pump | |
| 23.080 | J71 | GB/T 13364-1992 | 往复泵机械振动测试方法 | Measurement of mechanical vibration for reciprocating pump | |
| 23.040.60 | J15 | GB/T 13401-1992 | 钢板制对焊管件 | Steel plate butt-welding pipe fittings | |
| 23.040.60 | J15 | GB/T 13402-1992 | 大直径碳钢管法兰 | Large-diameter carbon steel pipe flanges | NEQ API 605-80 |
| 23.040.80 | J15 | GB/T 13403-1992 | 大直径碳钢管法兰用垫片 | Gaskets for large-diameter cabon steel pipe flanges | |
| 23.040.80 | J15 | GB/T 13404-1992 | 管法兰用聚四氟乙烯包复垫片 | Polytetrafluoroethylene envelope gaskets for pipe flanges | |
| 23.020.30 | J76 | GB 13438-1992 | 氩气瓶阀 | Valves for argon cylinders | NEQ DIN 477-79 |
| 23.020.30 | J76 | GB 13439-1992 | 液氯瓶阀 | Valves for liquid chlorine cylinders | NEQ JIS B8246-77 |
| 23.020.30 | J76 | GB/T 13440-1992 | 无缝气瓶压扁试验方法 | Method for flattening test of seamless gas cylinders | |
| 23.040.20 | G33 | GB/T 13526-1992 | 硬聚氯乙烯(PVC-U) 管材 二氯甲烷浸渍试验方法 | Unplasticized polyvinyl chloride (PVC-U) pipes - Dichloromethane test | NEQ ISO/DIS 7676 |
| 23.040.20 | G33 | GB/T 13527.1-1992 | 软聚氯乙烯管 (流体输送用) | Plasticized polyvinyl chloride tubing for transport of fluids | NEQ JIS K6771-77 |
| 23.040.20 | G33 | GB/T 13527.2-1992 | 软聚氯乙烯管 (电线绝缘用) | Plasticized polyvinyl chloride tubing for elect rical insulation | NEQ JIS C2410-75 |
| 23.040.45 | G33 | GB/T 13664-1992 | 低压输水灌溉用薄壁硬聚氯乙烯(PVC-U)管材 | Thin wall unplasticized polyvinyl chloride (PVC-U) pipes for low-pressure conveyance in irrigation | |
| 23.040.10 | H48 | GB/T 13793-1992 | 直缝电焊钢管 | Longitudinal electric resistance welded steel tubes | NEQ JIS G3444-88 |
| 23.060 | J16 | GB/T 13927-1992 | 通用阀门 压力试验 | Pressure testing for general purpose valves | NEQ ISO 5208-82 |
| 23.140 | J72 | GB/T 13928-1992 | 微型往复活塞空气压缩机 | Reciprocating piston micro air compressor | |
| 23.140 | J71 | GB/T 13929-1992 | 水环真空泵和水环压缩机试验方法 | Methods of testing for water-ring vacuum pumps and compressors | |
| 23.140 | J71 | GB/T 13930-1992 | 水环真空泵和水环压缩机气量测定方法 | Methods for the measurement of volume flow of gas of water-ring vacuum pump and compressor | |
| 23.120 | J88 | GB/T 13931-1992 | 电除尘器 性能测试方法 | Methods of performance tests for electrostatic precipitators | |
| 23.060 | J16 | GB/T 13932-1992 | 通用阀门铁制旋启式止回阀 | General purpose industrial valves--Cast iron swing check valves | |
| 23.120 | J72 | GB/T 13933-1992 | 小型贯流式通风机 | Miniature cross-flow fan | |
| 23.120 | F11 | GB/T 13981-1992 | 风力机设计通用要求 | Design general requirements for wind energy conversion system | |
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
国際整合 |
| 23.040.60 | J20 | GB/T 14034-1993 | 24°非扩口液压管接头连接尺寸 | Hydraulic fluid power--Connection for tubes and hoses--Dimensions and designs for 24°flareless fittings | |
| 23.100.20 | J20 | GB/T 14036-1993 | 液压缸活塞杆端带关节轴承耳环安装尺寸 | Hydraulic fluid power--Cylinders--Rod end spherical eyes--Mounting dimensions | NEQ ISO 6982-1982 |
| 23.100.20 | J20 | GB/T 14038-1993 | 气缸气口螺纹 | Pneumatic fluid power--Cylinders--Bore and port thread sizes | NEQ ISO 7180-1986 |
| 23.100.20 | J20 | GB/T 14039-1993 | 液压系统工作介质固体颗粒污染等级代号 | Hydraulic fluid power--Fluids--Method for coding level of contamination by solid particles | EQV ISO 4406-1987 |
| 23.100 | J20 | GB/T 14041.1-1993 | 液压滤芯结构完整性检验方法 | Hydraulic fluid power--Filter elements--Verification of fabrication integrity | NEQ ISO 2942-1974 |
| 23.100 | J20 | GB/T 14041.2-1993 | 液压滤芯材料与液体相容性检验方法 | Hydraulic fluid power--Filter elements--Verification of material compatibility with fluids | NEQ ISO 2943-1974 |
| 23.100 | J20 | GB/T 14041.3-1993 | 液压滤芯抗破裂性检验方法 | Hydraulic fluid power--Filter elements--Verification of collapse/burst resistance | NEQ ISO 2941-1974 |
| 23.100 | J20 | GB/T 14041.4-1993 | 液压滤芯额定轴向载荷检验方法 | Hydraulic fluid power--Filter elements--Method for end load test | NEQ ISO 3723-1976 |
| 23.100.20 | J20 | GB/T 14042-1993 | 液压缸活塞杆端柱销式耳环安装尺寸 | Hydraulic fluid power--Cylinders--Rod end plain eyes--Mounting dimensions | NEQ ISO 6981--1982 |
| 23.080 | J94 | GB/T 14096-1993 | 喷油泵试验台 试验方法 | Method for testing fuel injection pump test-stand | EQV ISO 4008/1-80 |
| 23.040.20 | G33 | GB/T 14152-2001 | 热塑性塑料管材耐外冲击性能试验方法 时针旋转法 | Thermoplastics pipes-Determination of resistance to external blows-Round-the-clock method | EQV ISO 3127:1994 |
| 23.020.30 | J76 | GB 14193-1993 | 液化气体气瓶充装规定 | Rules for filling of liquefied gas cylinders | |
| 23.020.30 | J76 | GB 14194-1993 | 永久气体气瓶充装规定 | Rules for filling of permanent gas cylinders | |
| 23.040.10 | H48 | GB/T 14291-1993 | 矿用流体输送电焊钢管 | Welded steel pipe for mine liquid service | NEQ JIS G3454;
ISO 64 |
| 23.120 | P48 | GB/T 14294-1993 | 组合式空调机组 | Central-station air handling units | |
| 23.120 | P48 | GB/T 14295-1993 | 空气过滤器 | Air filter | |
| 23.120 | P84 | GB/T 14296-1993 | 空气冷却器与空气加热器 | Air cooling and air heating coils | |
| 23.040.60 | J15 | GB/T 14382-1993 | 管道用三通过滤器 | Tee strainers for fluids for pipes | |
| 23.040.60 | J15 | GB/T 14383-1993 | 锻钢制承插焊管件 | Forged steel socket welding pipe fittings | |
| 23.060 | K55 | GB/T 14478-1993 | 大中型水轮机进水阀门基本技术条件 | Fundamental technical requirements for large and medium inlet valves of hydraulic turbine | |
| 23.100.30 | J20 | GB/T 14513-1993 | 气动元件流量特性的测定 | Pneumatic fluid power--Determination of flow rate characteristics of pneumatic components | NEQ ISO/DIS 6358 |
| 23.100.30 | J20 | GB/T 14514.1-1993 | 气动管接头试验方法 | Pneumatic fluid power--Tube fittings--Test methods | NEQ JIS B8381-85 |
| 23.100.30 | J20 | GB/T 14514.2-1993 | 气动快换接头试验方法 | Pneumatic fluid power--Quick action couplings--Test methods | NEQ ISO 6150-88 |
| 23.040.70 | J10 | GB/T 14525-1993 | 波纹金属软管通用技术条件 | General specification for corrugated metallic hose assemblies | NEQ BS 6501 |
| 23.020.30 | J74 | GB/T 14566-1993 | 正拱形金属爆破片型式与参数 | Specification and type for conventional domed metallic bursting discs | |
| 23.020.30 | J74 | GB/T 14567-1993 | 反拱形金属爆破片型式与参数 | Specification and type for reverse domed metallic bursting discs | |
| 23.040.60 | J15 | GB/T 14626-1993 | 锻钢制螺纹管件 | Forged steel threaded pipe fittings | NEQ ANSI B16.11 |
| 23.080 | J71 | GB/T 14794-1993 | 蒸汽往复泵 | Steam reciprocating pump | |
| 23.120 | Y61 | GB/T 14806-1993 | 家用和类似用途的交流换气扇及其调速器 | A.C.electric ventilating fans and regulators for household and similar purposes | NEQ IEC 60665,
JIS C9603 |
| 23.040.70 | G42 | GB/T 14904-1994 | 钢丝增强的橡胶、塑料软管和软管组合件 屈挠液压脉冲试验 | Rubber and plastics hose and hose assemblies--Wire reinforced--Hydraulic impulse test with flexing | NEQ ISO 6802-91 |
| 23.040.70 | G42 | GB/T 14905-1994 | 橡胶和塑料软管各层间粘合强度测定 | Rubber and plastics hose--Determination of adhesion between components | EQV ISO 8033-91 |
| 23.040.10 | H48 | GB/T 14975-1994 | 结构用不锈钢无缝钢管 | Stainless steel seamless tubes for structures | |
| 23.040.10 | H48 | GB/T 14976-1994 | 流体输送用不锈钢无缝钢管 | Stainless steel seamless pipes for fluid transport | |
| 23.020.10 | E98 | GB/T 15181-1994 | 球形金属罐容积标定法(围尺法) | Capacity calibration of spherical metal tanks--Strapping method | |
| 23.060.10 | J16 | GB/T 15185-1994 | 铁制和铜制球阀 | Cast iron and copper alloy ball valves | NEQ DIN 3357 T1-89 |
| 23.120 | J88 | GB/T 15187-1994 | 湿式除尘器性能测定方法 | Measuring method for performance of wet dust collectors | |
| 23.060 | J16 | GB/T 15188.1-1994 | 阀门的结构长度 对焊连接阀门 | Face-to-face, centre-to-face, end-to-end and centre-to-end dimensions of valves--Buttwelding valves | |
| 23.060 | J16 | GB/T 15188.2-1994 | 阀门的结构长度 对夹连接阀门 | Face-to-face, centre-to-face, end-to-end and centre-to-end dimensions of valves--Wafer valves | |
| 23.060 | J16 | GB/T 15188.3-1994 | 阀门的结构长度 内螺纹连接阀门 | Face-to-face, centre-to-face, end-to-end and centre-to-end dimensions of valves--Female screw valves | |
| 23.060 | J16 | GB/T 15188.4-1994 | 阀门的结构长度 外螺纹连接阀门 | Face-to-face, centre-to-face, end-to-end and centre-to end dimensions of valves--Mals screw valves | |
| 23.100.20 | J20 | GB/T 15242.1-1994 | 液压缸活塞和活塞杆动密封装置用同轴密封件尺寸系列和公差 | Hydraulic fluid power--Cylinder rod and piston seals for reciprocating applications of co-axial seals--Dimensions and tolerances | |
| 23.100.20 | J20 | GB/T 15242.2-1994 | 液压缸活塞和活塞杆动密封装置用支承环尺寸系列和公差 | Hydraulic fluid power--Cylinder rod and piston seals for reciprocating applications of bearing rings--Dimensions and tolerances | |
| 23.100.20 | J20 | GB/T 15242.3-1994 | 液压缸活塞和活塞杆动密封装置用同轴密封件安装沟槽尺寸系列和公差 | Hydraulic fluid power--Cylinder rod and piston seals for reciprocating applications of Co-axial seals--Dimensions and tolerances of housings | NEQ ISO 7425/1 - 2-88 |
| 23.100.20 | J20 | GB/T 15242.4-1994 | 液压缸活塞和活塞杆动密封装置用支承环安装沟槽尺寸系列和公差 | Hydraulic fluid power--Cylinder rod and piston seals for reciprocating applications of bearing rings--Dimensions and tolerances of housings | |
| 23.040.70 | G42 | GB/T 15329-1994 | 织物增强液压橡胶软管和软管组合件 | Rubber hoses and hose assemblies-Textile-reinforced hydraulic type | EQV ISO 4079-91 |
| 23.040.30 | Q14 | GB/T 15345-1994 | 预应力混凝土输水管检验方法 | Inspection methods of prestressed concrete pipes for water | |
| 23.020.30 | J74 | GB 15380-2001 | 小容积液化石油气钢瓶 | Liquefied petroleum gas steel mini-cylinders | |
| 23.020.30 | J16 | GB 15382-1994 | 气瓶阀通用技术条件 | General technique specifications for cylinder valves | |
| 23.020.30 | J16 | GB 15383-1994 | 气瓶阀出气口连接型式和尺寸 | Outlet connections and sizes for cylinder valves | |
| 23.020.30 | J76 | GB 15384-1994 | 气瓶型号命名方法 | Designation for gas cylinders | |
| 23.020.30 | J76 | GB 15385-1994 | 气瓶水压爆破试验方法 | Method for hydraulic burst test of gas cylinders | |
| 23.100.10? | K55 | GB/T 15469-1995 | 反击式水轮机空蚀评定 | Cavitation pitting evaluation in reaction hydraulic turbines | NEQ IEC 60609-1978 |
| 23.040.80 | J15 | GB/T 15601-1995 | 管法兰用金属包覆垫片 | Metallic envelope gaskets for pipe flanges | NEQ ISO 7483-1991 |
| 23.100.20? | J20 | GB/T 15622-1995 | 液压缸试验方法 | Hydraulic fluid power--Cylinders-test method | NEQ JIS B8354-1985 |
| 23.140 | Y61 | GB/T 15765-1995 | 房间空气调节器用全封闭型电动机--压缩机 | Hermetic motor--compressors for room air conditioners | NEQ ISO 907-1976 |
| 23.040.20 | G31 | GB/T 15819-1995 | 灌溉支管用聚乙烯(PE)25管材 由插入式管件引起环境应力开裂敏感性的试验方法和技术要求 | Test method and specifications of susceptibility for environmental stress-cracking induced by insert type fittings in low density polyethylene (PE)25 pipes for irrigation laterals | EQV ISO 8796-1989 |
| 23.040.20 | G31 | GB/T 15820-1995 | 聚乙烯压力管材与管件连接的耐拉拔试验 | Test of resistance to pull out of joints between polyethylene (PE) pressure pipes and fittings | EQV ISO 3501-1976 |
| 23.040.70 | G42 | GB/T 15907-1995 | 橡胶、塑料软管 燃烧试验方法 | Rubber and plastics hoses--Method of test for flammability | EQV ISO 8030-1987 |
| 23.040.70 | G42 | GB/T 15908-1995 | 织物增强液压型热塑性塑料软管和软管组合件 | Plastics hose and hose assemblies--Thermoplastics, textile-reinforced, hydraulic type | EQV ISO 3949-1991 |
| 23.140 | W56 | GB/T 15965-1995 | 手工打结地毯绒头长度的试验方法 | Hand-knotted carpet--Determination of length of pile | |
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
国際整合 |
| 23.020.30 | C68 | GB 16163-1996 | 瓶装压缩气体分类 | Classificetion of cylinder compressed gases | |
| 23.020.30 | C68 | GB 16164-1996 | 小容积溶解乙炔气瓶 | Small volume dissolved acetylene cylinders | |
| 23.020.30 | J09 | GB/T 16181-1996 | 爆破片装置夹持器型式和外形尺寸 | Bursting disc devices--Type and outline dimensions holders | |
| 23.020.30 | J75 | GB 16409-1996 | 板式换热器 | Plate heat exchanger | |
| 23.020.30 | Q82 | GB 16692-1996 | 便携式用丁烷气瓶 | Butane cylinders for portable butane cooker | EQV JIS S 2148-1991 |
| 23.040.70 | U55 | GB/T 16693-1996 | 软管快速接头 | Quick hose' s connection | |
| 23.040.01 | J78 | GB/T 16709-1996 | 真空技术 管路配件 装配尺寸 | Vacuum technology--Pipeline fittings--Mounting dimensions | IDT ISO 9803-1993 |
| 23.020.30 | J74 | GB 16749-1997 | 压力容器波形膨胀节 | Bellows expansion joints for pressure vessel | |
| 23.040.50 | Q10 | GB/T 16752-1997 | 混凝土和钢筋混凝土排水管试验方法 | Test methods of concrete and reinforced concrete drainage and sewer pipes | |
| 23.020 | B90 | GB 16774-1997 | 自增压式液氮容器 | Autoboosting calibre liquid nitrogen container | |
| 23.020 | B90 | GB/T 16775-1997 | 低温容器漏气速率测定方法 | Test methods for leak rate of cryogenic containers | |
| 23.040.20 | G33 | GB/T 16800-1997 | 排水用芯层发泡硬聚氯乙烯(PVC-U)管材 | Unplasticized polyvinyl chloride (PVC-U) pipes with a cellular core for drainage and sewerage systems | |
| 23.020.30 | J74 | GB 16804-1997 | 气瓶警示标签 | Precautionary labels for gas cylinders | EQV ISO 7225:1994 |
| 23.040 | E04 | GB/T 16805-1997 | 液体石油管道压力试验 | Pressure testing of liquid petroleum pipelines | EQV API RP 1110 |
| 23.080 | J71 | GB/T 16907-1997 | 离心泵技术条件(I类) | Technical specifications for centrifugal pumps--Class I | EQV ISO 9905:1994 |
| 23.020.30 | J74 | GB 16918-1997 | 气瓶用爆破片技术条件 | Bursting discs specification for gas cylinders | NEQ CCA S-1.1 |
| 23.140 | J72 | GB/T 16941-1997 | 流程工业用透平压缩机 设计、制造规范与数据表 | Compressors for the process industry--Turbo types--Specifications and data sheets for their design and construction | IDT ISO 8011:1988 |
| 23.040.50 | J15 | GB/T 17185-1997 | 钢制法兰管件 | Steel pipe fittings for flanged joint | NEQ ANSI B16.5:1981 |
| 23.040.50 | J15 | GB/T 17186-1997 | 钢制管法兰连接强度计算方法 | Calculating method for the strength of steel pipe flanged joint | |
| 23.060.01 | N16 | GB/T 17213.1-1998 | 工业过程控制阀 第1部分: 控制阀术语和总则 | Industrial--Process control valves Part 1: Control valve terminology and general considerations | EQV IEC 60534-1:1987 |
| 23.060.01 | N16 | GB/T 17213.5-1998 | 工业过程控制阀 第5部分: 标志 | Industrial-process control valves Part 5: Marking | EQV IEC 60534-5:1987 |
| 23.060.01 | N16 | GB/T 17213.7-1998 | 工业过程控制阀 第7部分: 控制阀数据单 | Industrial-process control valves Part 7: Control valve data sheet | EQV IEC 60534-7:1989 |
| 23.060.01 | N16 | GB/T 17213.8-1998 | 工业过程控制阀 第8部分: 噪声的考虑 第1节: 实验室内测量空气动力流流径控制阀产生的噪声 | Industrial-process control valves Part 8: Noise considerations Section 1: Laboratory measurement of noise generated by aerodynamic flow through control valves | EQV IEC 60534-8-1:1986 |
| 23.040.60 | J15 | GB/T 17241.1-1998 | 铸铁管法兰 类型 | Synotic table for cast iron pipe flanges | NEQ ISO 7005.2-1988 |
| 23.040.60 | J15 | GB/T 17241.2-1998 | 铸铁管法兰盖 | Cast iron pipe blank flanges | NEQ ISO 7005.2-1988 |
| 23.040.60 | J15 | GB/T 17241.3-1998 | 带颈螺纹铸铁管法兰 | Hubbed threaded cast iron pipe flanges | NEQ ISO 7005.2-1988 |
| 23.040.60 | J15 | GB/T 17241.4-1998 | 带颈平焊和带颈承插焊铸铁管法兰 | Hubbed slip-on-welding and hubbed socket welding cast iron pipe flanges | NEQ ISO 7005.2-1988 |
| 23.040.60 | J15 | GB/T 17241.5-1998 | 管端翻边带颈松套铸铁管法兰 | Loose hubbed cast iron pipe flanges for lapped pipe end | NEQ ISO 7005.2-1988 |
| 23.040.60 | J15 | GB/T 17241.6-1998 | 整体铸铁管法兰 | Integral cast iron pipe flanges | NEQ ISO 7005.2-1988 |
| 23.040.60 | J15 | GB/T 17241.7-1998 | 铸铁管法兰 技术条件 | Specifications for cast iron pipe flanges | NEQ ISO 7005.2-1988 |
| 23.020.30 | J76 | GB 17258-1998 | 汽车用压缩天然气钢瓶 | Steel cylinders for the on--board of compressed natural gas as a fuel for vehicles | |
| 23.020.30 | J76 | GB 17259-1998 | 机动车用液化石油气钢瓶 | Steel cylinders for the liquefied petroleum gas | |
| 23.020.30 | J74 | GB/T 17261-1998 | 钢制球形储罐型式与基本参数 | Spherical tanks type and data base | |
| 23.020.30 | J76 | GB 17268-1998 | 工业用非重复充装焊接钢瓶 | Non-refillable steel welded cylinder for industry cylinder | |
| 23.100.10 | J94 | GB/T 17368-1998 | 在用喷油泵试验台的校验 | Calibrating rule of using fuel injection pump test-bench | |
| 23.100.01 | J20 | GB/T 17446-1998 | 流体传动系统及元件 术语 | Fluid power systems and components--Vocabulary | IDT ISO 5598:1985 |
| 23.040.10 | H48 | GB/T 17456-1998 | 球墨铸铁管 外表面喷锌涂层 | Ductile iron pipes--External zinc-spray coating | EQV ISO 8179-1:1995 |
| 23.040.10 | H48 | GB/T 17457-1998 | 球墨铸铁管 水泥砂浆离心法衬层 一般要求 | Ductile iron pipes--Centrifugal cement mortar lining--General requirements | EQV ISO 4179:1985 |
| 23.040.10 | H48 | GB/T 17458-1998 | 球墨铸铁管 水泥砂浆离心法衬层 新拌砂浆的成份检验 | Ductile iron pipes--Centrifugal cement mortar lining--Composition controls of freshly applied mortar | EQV ISO 6600:1980 |
| 23.040.10 | H48 | GB/T 17459-1998 | 球墨铸铁管 沥青涂层 | Ductile iron pipes--Bitumen coating | EQV DIN 30674:1983 |
| 23.100.10 | J20 | GB/T 17483-1998 | 液压泵空气传声噪声级测定规范 | Test code for the determination of airborne noise level of hydraulic pumps | EQV ISO 4412-1:1991 |
| 23.100.30 | J20 | GB/T 17484-1998 | 液压油液取样容器 净化方法的鉴定和控制 | Hydraulic fluid power--Fluid sample containers--Qualifying and controlling cleaning methods | IDT ISO 3722:1976 |
| 23.100.10 | J20 | GB/T 17485-1998 | 液压泵、马达和整体传动装置参数定义和字母符号 | Hydraulic fluid power--Pumps,motors and integral transmissions--Parameter definitions and letter symbols | IDT ISO 4391:1983 |
| 23.100.30 | J20 | GB/T 17486-1998 | 液压过滤器 压降流量特性的评定 | Hydraulic fluid power--Filter--Evaluation of pressure drop versus flow characteristics | IDT ISO 3968:1981 |
| 23.100.30 | J20 | GB/T 17487-1998 | 四油口和五油口液压伺服阀 安装面 | Hydraulic fluid power--Four-and five-port servovalves--Mounting suriaces | IDT ISO 10372:1992 |
| 23.100.30 | J20 | GB/T 17488-1998 | 液压滤芯 流动疲劳特性的验证 | Hydraulic fluid power--Filter elements--Verification of flow fatigue characteristics | IDT ISO 3724:1976 |
| 23.100.01 | J20 | GB/T 17489-1998 | 液压颗粒污染分析 从工作系统管路中提取液样 | Hydraulic fluid power--Particulate contamination analysis--Extraction of fluid samples from lines of an operating system | IDT ISO 4021:1992 |
| 23.100.30 | J20 | GB/T 17490-1998 | 液压控制阀 油口、底板、控制装置和电磁铁的标识 | Hydraulic fluid power--Identification of valve ports,subplates,control devices and solenoids | IDT ISO 9461:1992 |
| 23.100.10 | J20 | GB/T 17491-1998 | 液压泵、马达和整体传动装置稳态性能的测定 | Hydraulic fluid power--Positive displacement pumps,motors and integral transmissions--Determination of steady-state performance | IDT ISO 4409:1986 |
| 23.040.80 | G42 | GB/T 17604-1998 | 橡胶 管道接口用密封圈制造质量的建议 疵点分类与类别 | Rubber--Recommendations for the workmanship of pipe joint rings--Description and classification of imperfections | IDT ISO 9691:1992 |
| 23.020.30 | J74 | GB 17673-1999 | 液化丙烯、丙烷钢质焊接气瓶 | Welded steel cylinders for liquefied propylene and propane gases | |
| 23.120 | J73 | GB/T 17758-1999 | 单元式空气调节机 | Unitary air conditioners | |
| 23.120 | J72 | GB/T 17774-1999 | 工业通风机 尺寸 | Industrial fans--Dimensions | IDT ISO 13351:1996 |
| 23.120 | Y61 | GB 17790-1999 | 房间空气调节器安装规范 | Installation rule for room air-conditioner | |
| 23.040.10 | H62 | GB/T 17791-1999 | 空调与制冷用无缝铜管 | Specification for seamless copper tube for air conditioning and refrigeration field service | NEQ ASTM B280,B743 |
| 23.060.20 | J16 | GB 17877-1999 | 液氨瓶阀 | Valves for liquid ammonia cylinders | |
| 23.060.20 | J16 | GB 17878-1999 | 工业用非重复充装瓶阀 | Non-refillable cylinder valve for industry | NEQ JIS B8246 |
| 23.020.30 | J74 | GB 17925-1999 | 气瓶对接焊缝 X射线实时成像检测 | Standard practice for X-ray real-time examination of cylinders weld | |
| 23.020.30 | J74 | GB 17926-1999 | 车用压缩天然气瓶阀 | Valves for compression natural gas cylinders for vehicles | NEQ JIS B8246:1994 |
| 23.120 | P48 | GB/T 17939-1999 | 核级高效空气过滤器 | Nuclear grade high efficiency particulate air filter | EQV ASME AG-1:1997 |
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
国際整合 |
| 23.040.20 | G33 | GB/T 18042-2000 | 热塑性塑料管材蠕变比率的试验方法 | Thermoplastics pipes--Determination of creep ratio | EQV ISO 9967:1994 |
| 23.080 | J71 | GB/T 18149-2000 | 离心泵、混流泵和轴流泵 水力性能试验规范 精密级 | Centrifugal,mixed flow and axial pumps--Code for hydraulic performance tests--Precision class | EQV ISO 5198:1987 |
| 23.020.30 | J74 | GB/T 18182-2000 | 金属压力容器声发射检测及结果评价方法 | Acoustic emission examination and evaluation of metallic pressure vessels | NEQ ASMEY-12-89
ASTM E5 |
| 23.160 | J78 | GB/T 18193-2000 | 真空技术 质谱检漏仪校准 | Vacuum technology--Mass-spectrometer-type leak-detector calibration | IDT ISO 3530:1979 |
| 23.020.30 | J76 | GB 18299-2001 | 机动车用液化石油气钢瓶集成阀 | Automotive LPG steel cylinder multivalve | NEQ ECE 第67号法规 |
| 23.020.30 | G93 | GB/T 18300-2001 | 自动控制钠离子交换器技术条件 | Specification for automatic sodium ion exchange Water treatment equipment | |
| 23.040.70 | G42 | GB/T 18422-2001 | 橡胶和塑料软管及软管组合件 透气性的测定 | Rubber and plastics hoses and hose assemblies--Determination of permeability to gas | EQV ISO 4080:1991 |
| 23.040.70 | G42 | GB/T 18423-2001 | 橡胶和塑料软管及非增强软管 液体壁透性测定 | Rubber and plastics hoses and tubing--Determination of transmission of liquids through hose and tubing walls | IDT ISO 8308:1993 |
| 23.040.70 | G42 | GB/T 18424-2001 | 橡胶和塑料软管 氙弧灯曝晒 颜色和外观变化的测定 | Rubber and plastics hoses--Exposure to a xenon arc lamp--Determination of changes in colour and appearance | EQV ISO 11758:1995 |
| 23.040.70 | G42 | GB/T 18425-2001 | 蒸汽橡胶软管试验方法 | Rubber hoses for steam--Test methods | IDT ISO 4023:1991 |
| 23.100 | G42 | GB/T 18427-2001 | 液压软管组合件 液压系统外部泄漏分级 | Hydraulic hose assemblies--External leakage Classification for hydraulic systems | IDT ISO/TR 11340:1995 |
| 23.140 | J73 | GB/T 18429-2001 | 全封闭涡旋式制冷压缩机 | Hermetic scroll refrigerant compressors | |
| 23.140 | J73 | GB/T 18430.1-2001 | 蒸气压缩循环冷水(热泵)机组 工商业用和类似用途的冷水(热泵)机组 | Water chilling (heat pump) packages using the vapor compression cycle Water chilling (heat pump) packages for industrial and commercial and similar application | NEQ ARI 550/590:1998 |
| 23.140 | J73 | GB/T 18430.2-2001 | 蒸气压缩循环冷水(热泵)机组 户用和类似用途的冷水(热泵)机组 | Water chilling (Heat pump) Packages using the vapor compression cycle Household and similar water-chilling (Heat pump) packages | NEQ ARI 550/590:1998 |
| 23.140 | J73 | GB/T 18431-2001 | 蒸汽和热水型溴化锂吸收式冷水机组 | Steam and hot water type lithium bromide absorption water chiller | NEQ JIS B 8622:1994 |
| 23.020 | J76 | GB 18442-2001 | 低温绝热压力容器 | Cryo-insulation pressure vessels | |
| 23.020 | J76 | GB/T 18443.1-2001 | 低温绝热压力容器试验方法 容积测量 | Testing method of cryo-insulation pressure vessels volume measurement | |
| 23.040 | J76 | GB/T 18443.2-2001 | 低温绝热压力容器试验方法 真空度测量 | Testing method of cryo-insulation pressure vessels vacuum measurement | |
| 23.040 | J76 | GB/T 18443.3-2001 | 低温绝热压力容器试验方法 漏率测量 | Testing method of cryo-insulation pressure vessels leakage measurement | |
| 23.040 | J76 | GB/T 18443.4-2001 | 低温绝热压力容器试验方法 漏放气速率测量 | Testing method of cryo-insulation pressure vessels leak and outgassing rate measurement | |
| 23.040 | J76 | GB/T 18443.5-2001 | 低温绝热压力容器试验方法 静态蒸发率测量 | Testing method of cryo-insulation pressure vessels static vaporation rate measurement | |
| 23.040.20 | G33 | GB/T 18474-2001 | 交联聚乙烯(PE-X)管材与管件 交联度的试验方法 | Pipes and fittings made of crosslinked polyethylene(PE-X)--Estimation of the degree of crosslinking by determination of the gel content | EQV ISO 10147:1994 |
| 23.040.20 | G33 | GB/T 18475-2001 | 热塑性塑料压力管材和管件用材料分级和命名 总体使用(设计)系数 | Thermoplastics materials for pipes and fittings for pressure applications classification and designation--Overall Service(design) coefficient | EQV ISO 12162:1995 |
| 23.040.20 | G33 | GB/T 18476-2001 | 流体输送用聚烯烃管材 耐裂纹扩展的测定切口管材裂纹慢速增长的试验方法(切口试验) | Polyolefin pipes for the conveyance of fluids--Determination of resistance to crack propagation-Test method for slow crack growth on notched pipes(notch test) | EQV ISO 13479:1997 |
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
国際整合 |
ご意見、ご要望、ご質問 は、