中国国家標準(GB,GB/T規格)
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) |  規格名称(英語) |
国際整合 |
|---|---|---|---|---|---|
| 19.080 | K40 | GB/T 311.6-1983 | 高电压试验技术 第五部分 测量球隙 | High voltage test techniques--Part 5:Sphere-gaps for voltage measurment | EQV IEC 60052-60 |
| 19.060 | H22 | GB/T 1172-1999 | 黑色金属硬度及强度换算值 | Conversion of hardness and strength for ferrous metal | |
| 19.040 | K04 | GB/T 2424.14-1995 | 电工电子产品环境试验 第二部分: 试验方法 太阳辐射试验导则 | Environmental testing for electric and electronic products--Part 2: Test methods--Guidance for solar radiation testing | IDT IEC 60068-2-9-1975 |
| 19.040 | K04 | GB/T 2421-1999 | 电工电子产品环境试验 第1部分: 总则 | Environmental testing for electric and electronic products-Part 1: General and guidance | IDT IEC 60068-1:1988 |
| 19.040 | K04 | GB/T 2422-1995 | 电工电子产品环境试验 术语 | Environmental testing for electric and electronic products--Terms and definitions | EQV IEC 60068-5-2-90 |
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
国際整合 |
| 19.040 | K04 | GB/T 2423.1-2001 | 电工电子产品环境试验 第2部分: 试验方法 试验A: 低温 | Environmental testing for electric and electronic products Part 2: Test methods Tests A: Cold | IDT IEC 60068-2-1:1990 |
| 19.040 | K04 | GB/T 2423.2-2001 | 电工电子产品环境试验 第2部分: 试验方法 试验B: 高温 | Environmental testing for electric and electronic products Part 2: Test methods Tests B: Dry heat | IDT IEC 60068-2-2:1974 |
| 19.040 | K04 | GB/T 2423.3-1993 | 电工电子产品基本环境试验规程 试验Ca:恒定湿热试验方法 | Basic environmental testing procedures for electric and electronic products--Test Ca: Damp heat, steady state | EQV IEC 60068-2-3-84 |
| 19.040 | K04 | GB/T 2423.4-1993 | 电工电子产品基本环境试验规程 试验Db: 交变湿热试验方法 | Basic environmental testing procedures for electric and electronic products--Test Db: Damp heat, cyclic | EQV IEC 60068-2-30-80 |
| 19.040 | K04 | GB/T 2423.5-1995 | 电工电子产品环境试验 第二部分：试验方法 试验Ea和导则: 冲击 | Environmental testing for electric and electronic products--Part 2: Test methods--Test Ea and guidance: Shock | IDT IEC 60068-2-27-1987 |
| 19.040 | K04 | GB/T 2423.6-1995 | 电工电子产品环境试验 第二部分: 试验方法 试验Eb和导则： 碰撞 | Environmental testing for electric and electronic products--Part 2: Test methods--Test Eb and guidance: Bump | IDT IEC 60068-2-29-1987 |
| 19.040 | K04 | GB/T 2423.7-1995 | 电工电子产品环境试验 第二部分: 试验方法 试验Ec和导则: 倾跌与翻倒 (主要用于设备型样品) | Environmental testing for electric and electronic products--Test Ec and quidance: Drop and topple (Primarily for equipment-type specimens) | IDT IEC 60068-2-31-1982 |
| 19.040 | K04 | GB/T 2423.8-1995 | 电工电子产品环境试验 第二部分: 试验方法 试验Ed: 自由跌落 | Environmental testing for electric and electronic products--Parts 2: Test methods--Test Ed: Free fall | IDT IEC 60068-2-32-1990 |
| 19.040 | K04 | GB/T 2423.9-2001 | 电工电子产品环境试验 第2部分: 试验方法 试验Cb: 设备用恒定湿热 | Environmental testing for electric and electronic products Part 2: Test methods Test Cb: Damp heat,steady state,primarily for equipment | IDT IEC 60068-2-56:1988 |
| 19.040 | K04 | GB/T 2423.10-1995 | 电工电子产品环境试验 第二部分: 试验方法 试验Fc和导则: 振动(正弦) | Environmental testing for electric and electronic products--Part 2: Test methods--Test Fc and guidance: Vibration (Sinusoidal) | IDT IEC 60068-2-6-1982 |
| 19.040 | K04 | GB/T 2423.11-1997 | 电工电子产品环境试验 第2部分: 试验方法 试验Fd: 宽频带随机振动--一般要求 | Environmental testing for electric and electronic products Part 2: Test methods Test Fd: Random vibration wide band--General requirements | IDT IEC 60068-2-34:1973 |
| 19.040 | K04 | GB/T 2423.12-1997 | 电工电子产品环境试验 第2部分: 试验方法 试验Fda: 宽频带随机振动--高再现性 | Environmental testing for electric and electronic products Part 2: Test methods Test Fda: Random vibration wide band--Reproducibility high | IDT IEC 60068-2-35:1973 |
| 19.040 | K04 | GB/T 2423.13-1997 | 电工电子产品环境试验 第2部分: 试验方法 试验Fdb: 宽频带随机振动 中再现性 | Environmental testing for electric and electronic products Part 2: Test methods Test Fdb: Random vibration wide band--Reproducibility medium | IDT IEC 60068-2-36:1973 |
| 19.040 | K04 | GB/T 2423.14-1997 | 电工电子产品环境试验 第2部分: 试验方法 试验Fdc: 宽频带随机振动 低再现性 | Environmental testing for electric and electronic products Part 2: Test methods Test Fdc: Random vibration wide band--Reproducibility low | IDT IEC 60068-2-37:1973 |
| 19.040 | K04 | GB/T 2423.15-1995 | 电工电子产品环境试验 第二部分: 试验方法 试验Ga和导则: 稳态加速度 | Environmental testing for electric and electronic products--Part 2: Test methods--Test Ga and guidance: Acceleration, steady state | IDT IEC 60068-2-7-1986 |
| 19.040 | K04 | GB/T 2423.16-1999 | 电工电子产品环境试验 第2部分: 试验方法 试验J和导则: 长霉 | Environmental testing for electric and electronic products-Part 2: Tests--Test J and guidance: Mould growth | IDT IEC 60068-2-10:1988 |
| 19.040 | K04 | GB/T 2423.17-1993 | 电工电子产品基本环境试验规程 试验Ka: 盐雾试验方法 | Basic environmental testing procedures for electric and electronic products--Test Ka: Salt mist | EQV IEC 60068-2-11-81 |
| 19.040 | K04 | GB/T 2423.18-2000 | 电工电子产品环境试验第二部分: 试验--试验Kb:盐雾, 交变(氯化钠溶液) | Environmental testing for electric and electronic products--Part 2: Tests--Test Kb: Salt mist,cyclic (sodium chloride solution) | IDT IEC 60068-2-52:1996 |
| 19.040 | K04 | GB/T 2423.19-1981 | 电工电子产品基本环境试验规程 试验Kc: 接触点和连接件的二氧化硫试验方法 | Electric and electronic products--Basic environmental test regulations for electricians--Test Kc: The sul- phur dioxide method at the point of contact and the connecting element | IDT IEC 60068-2-42-76 |
| 19.040 | K04 | GB/T 2423.20-1981 | 电工电子产品基本环境试验规程 试验Kd: 接触点和连接件的硫化氢试验方法 | Electric and electronic products--Basic environmental test regulations for electricians--Test Kd:The hydrogen sulfide method at the point of contact and the connecting element | IDT IEC 60068-2-43-76 |
| 19.040 | K04 | GB/T 2423.21-1991 | 电工电子产品基本环境试验规程 试验 M: 低气压试验方法 | Basic environmental testing procedures for electric and electronic products - Test M: Low air pressure | NEQ IEC 60068-2-13-83 |
| 19.040 | K04 | GB/T 2423.22-1987 | 电工电子产品基本环境试验规程 试验N:温度变化试验方法 | Basic environmental testing procedures for electric and electronic products--Test N: change of tempera ture | EQV IEC 60068-2-14-84 |
| 19.040 | K04 | GB/T 2423.23-1995 | 电工电子产品环境试验 试验Q:密封 | Environmental testing for electric and electronic products--Test Q: Sealing | |
| 19.040 | K04 | GB/T 2423.24-1995 | 电工电子产品环境试验 第二部分: 试验方法 试验Sa: 模拟地面上的太阳辐射 | Environmental testing for electric and electronic products--Part 2: Test methods--Test Sa: Simulated solar radiation at ground level | IDT IEC 60068-2-5-1975 |
| 19.040 | K04 | GB/T 2423.25-1992 | 电工电子产品基本环境试验规程 试验Z/AM: 低温／低气压综合试验 | Basic environmental testing procedures for electric and electronic products - Test Z/AM: Combined cold/low air pressure tests | NEQ IEC 60068-2-40-76 |
| 19.040 | K04 | GB/T 2423.26-1992 | 电工电子产品基本环境试验规程 试验Z/BM: 高温／低气压综合试验 | Basic environmental testing procedures for electric and electronic products - Test Z/BM: Combined dry heat /low air pressure tests | NEQ IEC 60068-2-41-76 |
| 19.040 | K04 | GB/T 2423.27-1981 | 电工电子产品基本环境试验规程 试验Z/AMD:低温/ 低气压 /湿热连续综合试验方法 | Electric and electronic products--Basic environmental test regulations for electricians -- Test Z/AMD: The successive integrated low temperature/low atmospheric pressure/damp-heat mehtod | IDT IEC 60068-2-39-76 |
| 19.040 | K04 | GB/T 2423.28-1982 | 电工电子产品基本环境试验规程 试验T:锡焊试验方法 | Basic environmental testing procedures for electric and electronic products--Test T: soldering | EQV IEC 60068-2-20-79 |
| 19.040 | K04 | GB/T 2423.29-1999 | 电工电子产品环境试验 第2部分: 试验方法 试验U:引出端及整体安装件强度 | Environmental testing for electric and electronic products-Part 2:Test methods-Test U:Robustness of terminations and integral mounting devices | IDT IEC 60068-2-21:1992 |
| 19.040 | K04 | GB/T 2423.30-1999 | 电工电子产品环境试验 第2部分: 试验方法 试验XA和导则:在清洗剂中浸渍 | Environmental testing for electric and electronic products-Part 2: Test methods-Test XA and guidance:Immersion in cleaning solvents | IDT IEC 60068-2-45:1993 |
| 19.040 | K04 | GB/T 2423.31-1985 | 电工电子产品基本环境试验规程 倾斜和摇摆试验方法 | Basic environmental testing procedures for electric and electronic products--Test: inclinations and motions | |
| 19.040 | K04 | GB/T 2423.32-1985 | 电工电子产品基本环境试验规程 润湿称量法可焊性试验方法 | Basic environmental testing procedures for electric and electronic products--Solderability testing by the wetting balance method | |
| 19.040 | K04 | GB/T 2423.33-1989 | 电工电子产品基本环境试验规程 试验Kca:高浓度二氧化硫试验方法 | Basic environmental testing procedures for electric and electronic products - Test Kca: High consistence sulphur dioxide test | NEQ DIN 50018-78 |
| 19.040 | K04 | GB/T 2423.34-1986 | 电工电子产品基本环境试验规程 试验Z/AD: 温度/ 湿度组合循环试验方法 | Basic environmental testing procedures for electric and electronic products--Test Z/AD: Composite temperature/humidity cyclic test | IDT IEC 60068-2-38-74 |
| 19.040 | K04 | GB/T 2423.35-1986 | 电工电子产品基本环境试验规程 试验Z/Afc:散热和非散热试验样品的低温/ 振动(正弦)综合试验方法 | Basic environmental testing procedures for electric and electronic products--Test Z/Afc: Combined low temperature/vibation (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens | IDT IEC 60068-2-50-83 |
| 19.040 | K04 | GB/T 2423.36-1986 | 电工电子产品基本环境试验规程 试验Z/BFc:散热和非散热样品的高温/ 振动(正弦)综合试验方法 | Basic environmental testing procedures for electric and electronic products--Test Z/BFc: Combined high temperature/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens | IDT IEC 60068-2-51-83 |
| 19.040 | K04 | GB/T 2423.37-1989 | 电工电子产品基本环境试验规程 试验 L: 砂尘试验方法 | Basic environmental testing procedures for electric and electronic products？Test L: Dust and sand | NEQ DIN 40046-78 |
| 19.040 | K04 | GB/T 2423.38-1990 | 电工电子产品基本环境试验规程 试验 R: 水试验方法 | Basic environmental test procedures for electric and electronic products？Test R: Water test method | |
| 19.040 | K04 | GB/T 2423.39-1990 | 电工电子产品基本环境试验规程 试验Ee: 弹跳试验方法 | Basic environmental testing procedures for electric and electronic products - Test Ee: Bounce | |
| 19.040 | K04 | GB/T 2423.40-1997 | 电工电子产品环境试验 第2部分: 试验方法 试验Cx:未饱和高压蒸汽恒定湿热 | Environmental test for electric and electronic products--Part 2:Test method Test Cx: Damp heat, steady state(unsaturated pressurized vapour) | IDT IEC 60068-2-66:1994 |
| 19.040 | K04 | GB/T 2423.41-1994 | 电工电子产品基本环境试验规程 风压试验方法 | Basic environmental testing procedures for electric and electronic products--Wind pressure | |
| 19.040 | K04 | GB/T 2423.42-1995 | 电工电子产品环境试验 低温/低气压/振动(正弦)综合试验方法 | Basic environmental testing procedures for electric and electronic products--Combined low temperature/low air pressure/vibration(sinusoidal)test | |
| 19.040 | K04 | GB/T 2423.43-1995 | 电工电子产品环境试验 第二部分: 试验方法 元件、设备和其他产品在冲击(Ea) 、碰撞(Eb) 、振动(Fc和Fb)和稳态加速度(Ca)等动力学试验中的安装要求和导则 | Environmental testing for electric and electronic products--Part 2: Test methods--Mounting of components, equipment and other articles for dynamic tests including shock(Ea), bump(Eb), vibration(Fc and Fd) and steady-state acceleration(Ca) and guidanc | IDT IEC 60068-2-47-1982 |
| 19.040 | K04 | GB/T 2423.44-1995 | 电工电子产品环境试验 第二部分: 试验方法 试验Eg: 撞击 弹簧锤 | Environmental testing for electric and electronic products--Part 2: Test method--Test Eg: Impact, spring hammer | EQV IEC 60068-2-63-1991 |
| 19.040 | K04 | GB/T 2423.45-1997 | 电工电子产品环境试验 第2部分：试验方法 试验Z/ABDM：气候顺序 | Environmental testing for electric and electronic products-Part 2: Test methods-Test Z/ABDM: Climatic sequence | IDT IEC 60068-2-61:1991 |
| 19.040 | K04 | GB/T 2423.46-1997 | 电工电子产品环境试验 第2部分：试验方法 试验Ef：撞击 摆锤 | Environmental testing for electric and electronic products--Part 2: Tests method-Test Ef: Impact,pendulum hammer | IDT IEC 60068-2-62:1991 |
| 19.040 | K04 | GB/T 2423.47-1997 | 电工电子产品环境试验 第2部分: 试验方法 试验Fg: 声振 | Environmental testing for electric and electronic products Part 2: Test methods Test Fg: Vibration, acoustically induced | IDT IEC 60068-2-65:1993 |
| 19.040 | K04 | GB/T 2423.48-1997 | 电工电子产品环境试验 第2部分: 试验方法 试验Ff: 振动--时间历程法 | Environmental testing for electric and electronic products Part 2: Test methods Test Ff:Vibration--Time-history method | IDT IEC 60068-2-57:1989 |
| 19.040 | K04 | GB/T 2423.49-1997 | 电工电子产品环境试验 第2部分: 试验方法 试验Fe: 振动--正弦拍频法 | Environmental testing for electric and electronic products Part 2: Test methods Test Fe: Vibration--sine-beat method | IDT IEC 60068-2-59:1990 |
| 19.040 | K04 | GB/T 2423.50-1999 | 电工电子产品环境试验 第2部分: 试验方法 试验Cy:恒定湿热主要用于元件的加速试验 | Environmental testing for electric and electronic products-Part 2: Tests--Test Cy:Damp heat,steady state,accelerated test primarily intended | IDT IEC 60068-2-67:1995 |
| 19.040 | K04 | GB/T 2423.51-2000 | 电工电子产品环境试验 第2部分: 试验方法 试验Ke: 流动混合气体腐蚀试验 | Environmental testing for electric and electronic products Part 2: Test methods--Test Ke: Flowing mixed gas corrosion test | IDT IEC 60068-2-60:1995 |
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
国際整合 |
| 19.040 | K04 | GB/T 2424.1-1989 | 电工电子产品基本环境试验规程 高温低温试验导则 | Basic environmental testing procedures for electric and electronic products - Guidance for high temperatureand low temperature tests | |
| 19.040 | K04 | GB/T 2424.2-1993 | 电工电子产品基本环境试验规程 湿热试验导则 | Basic environmental testing procedures for electric and electronic products--Guidance for damp heat tests | EQV IEC 60068-2-28-90 |
| 19.040 | K04 | GB/T 2424.10-1993 | 电工电子产品基本环境试验规程 大气腐蚀加速试验的通用导则 | Basic environmental testing procedures for electric and electronic products--General guidance of accelerated testing for atmospheric corrosion | EQV IEC 60355-71 |
| 19.040 | K04 | GB/T 2424.11-1982 | 电工电子产品基本环境试验规程 接触点和连接件的二氧化硫试验导则 | Basic environmental testing procedures for electric and electronic products--Guidance for sulphur dioxide test for contacts and connections | |
| 19.040 | K04 | GB/T 2424.12-1982 | 电工电子产品基本环境试验规程 接触点和连接件的硫化氢试验导则 | Basic environmental testing procedures for electric and electronic products--Guidance for hydrogen sulphide test for contacts and connections | |
| 19.040 | K04 | GB/T 2424.13-1981 | 电工电子产品基本环境试验规程 温度变化试验导则 | Electric and electronic products--Basic environmental test regulations for electricians--Guidelines for temperature variation tests | IDT IEC 60068-2-33-71 |
| 19.040 | K04 | GB/T 2424.15-1992 | 电工电子产品基本环境试验规程 温度／低气压综合试验导则 | Basic enviromental testing procedures for electric and electronic products？Guide for combined temperature/low air pressare tests | EQV IEC 60068-3-2-76 |
| 19.040 | K04 | GB/T 2424.17-1995 | 电工电子产品环境试验 锡焊试验导则 | Environmental testing for electric and electronic products--Guidance on soldering test | |
| 19.040 | K04 | GB/T 2424.19-1984 | 电工电子产品基本环境试验规程 模拟贮存影响的环境试验导则 | Basic environmental testing procedures for electric and electronic products--Guidance for the environmental tests simulating the effects of storage | EQV IEC 60068-2-48-82 |
| 19.040 | K04 | GB/T 2424.20-1985 | 电工电子产品基本环境试验规程 倾斜和摇摆试验导则 | Basic environmental testing procedures for electric and electronic products--Guidance for test simulating inclinations and motions | |
| 19.040 | K04 | GB/T 2424.21-1985 | 电工电子产品基本环境试验规程 润湿称量法可焊性试验导则 | Basic environmental testing procedures for electric and electronic products--Guidance on solderability testing by the wetting balance method | |
| 19.040 | K04 | GB/T 2424.22-1986 | 电工电子产品基本环境试验规程 温度(低温、高温)和振动 (正弦) 综合试验导则 | Basic environmental testing procedures for electric and electronic products--Guidance for combined temperature (cold and heat) vibration (sinusoidal) tests | EQV IEC 60068-2-53-84 |
| 19.040 | K04 | GB/T 2424.23-1990 | 电工电子产品基本环境试验规程 水试验导则 | Basic environmental test procedures for electric and electronic products - Guidance for water test | |
| 19.040? | K04 | GB/T 2424.24-1995 | 电工电子产品环境试验温度(低温、高温)/低气压/振动（正弦)综合试验导则 | Basic environmental testing procedures for electric and electronic products--Guidance for combined temperature(cold and heat)/low air pressure/vibration (sinusoidal)test | |
| 19.040 | K04 | GB/T 2424.25-2000 | 电工电子产品环境试验 第3部分: 试验导则 地震试验方法 | Environmental testing for electric and electronic products Part 3: Test guidance Seismic test methods | IDT IEC 60068-3-3:1991 |
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
国際整合 |
| 19.060;
77. |
N71 | GB/T 2491-1984 | 洛氏硬度计检验磨具硬度的方法 | Bonded abrasives hardness measurement by Rockwell tester | |
| 19.100 | N70 | GB/T 2611-1992 | 试验机通用技术要求 | General requirements for testing machines | |
| 19.060 | N71 | GB/T 2848-1992 | 洛氏硬度计技术条件 | Specifications for Rockwell hardness testers | NEQ ISO 716-86 |
| 19.060 | N71 | GB/T 2850-1992 | 标准洛氏硬度块 | Standardized blocks of Rockwell hardness | NEQ ISO 674-88 |
| 19.060 | N71 | GB/T 3159-1992 | 液压式万能试验机 | Hydraulic universal testing machines | NEQ ISO 7500/1-86 |
| 19.060;
77. |
N71 | GB/T 3722-1992 | 液压式压力试验机 | Hydraulic compression testing machines | |
| 19.080 | A42 | GB/T 3769-1983 | 绘制频率特性图和极坐标图的标度和尺寸 | Scales and sizes for plotting frequency characteristics and polar diagrams | NEQ IEC 60263-75 |
| 19.060 | N71 | GB/T 3773-1993 | 表面洛氏硬度计技术条件 | Specification for Rockwell superficial hardness testers | NEQ ISO 1079-89 |
| 19.060;
77. |
N71 | GB/T 3774-1993 | 标准表面洛氏硬度块 | Standardized blocks of Rockwell superficial hardness | NEQ ISO 1355-89 |
| 19.060;
77. |
N71 | GB/T 3808-1995 | 摆锤式冲击试验机 | Pendulum impact testing machines | |
| 19.080 | N22 | GB/T 3925-1983 | 2.0级交流电度表的验收方法 | Acceptance inspection of class 2 alternating current watthour meters | EQV IEC 60514-75 |
| 19.080 | N25 | GB/T 3927-1983 | 直流电位差计 | Direct-current potentiometers | EQV IEC 60523-75(79) |
| 19.080 | N25 | GB/T 3928-1983 | 直流电阻分压箱 | D.C.resistive volt ratio boxes | EQV IEC 60524-75 |
| 19.080 | A25 | GB/T 3929-1983 | 标准电池 | Standard cells | EQV IEC 60428-73 |
| 19.080 | N25 | GB/T 3930-1983 | 测量电阻用直流电桥 | D.C.bridge for measuring resistance | EQV IEC 60564-77 |
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
国際整合 |
| 19.080 | N09 | GB 4793.2-2001 | 测量、控制及实验室用电气设备的安全 电工测量和试验用手持电流钳的特殊要求 | Safety requirements for electrical equipment for measurement,control and laboratory use Particular requirements for hand-held current clamp for electrical measurement and test | IDT IEC 61010-2-032:1994 |
| 19.080 | N09 | GB 4793.3-2001 | 测量、控制及实验室用电气设备的安全 实验室用混合和搅拌设备的特殊要求 | Safety requirements for electrical equipment for measurement,control and laboratory use Particular requirements for laboratory equipment for mixing and stirring | IDT IEC 61010-2-051:1995 |
| 19.080 | N09 | GB 4793.4-2001 | 测量、控制及实验室用电气设备的安全 实验室用处理医用材料的蒸压器的特殊要求 | Safety requirements for electrical equipment for measurement,control and laboratory use Particular requirements for autoclaves using steam for the treatment of medical materials and for laboratory process | IDT IEC 61010-2-041:1995 |
| 19.080 | N09 | GB 4793.5-2001 | 测量、控制及实验室用电气设备的安全 电工测量和试验用手持探头的特殊要求 | Safety requirements for electrical equipment for measurement,control and laboratory use Particular requirements for hand-held probe assemblies for electrical measurement and test | IDT IEC 61010-2-031:1993 |
| 19.080 | N09 | GB 4793.6-2001 | 测量、控制及实验室用电气设备的安全 实验室用材料加热设备的特殊要求 | Safety requirements for electrical equipment for measurement,control and laboratory use Particular requirements for laboratory equipment for the heating of materials | IDT IEC 61010-2-010:1992 |
| 19.080 | N09 | GB 4793.7-2001 | 测量、控制及实验室用电气设备的安全 实验室用离心机的特殊要求 | Safety requirements for electrical equipment for measurement,control and laboratory use Particular requirements for alboratory centrifuges | IDT IEC 61010-2-020:1992 |
| 19.040 | K04 | GB/T 4796-2001 | 电工电子产品环境参数分类及其严酷程度分级 | Classification of environmental parameters and their severities of electric and electronic products | IDT IEC 60721-1:1990 |
| 19.040 | K04 | GB/T 4797.1-1984 | 电工电子产品自然环境条件 温度和湿度 | Environmental conditions appearing in nature of electric and electronic products--Temperature and humidity | NEQ IEC 60721-2-1-82 |
| 19.040 | K04 | GB/T 4797.2-1986 | 电工电子产品自然环境条件 海拔与气压、水深和水压 | Environmental conditions for electric and electronic products appearing in nature--Altitude and air pressure, deepness and water pressure | |
| 19.040 | K04 | GB/T 4797.3-1986 | 电工电子产品自然环境条件 生物 | Environmental conditions for electric and electronic products appearing in nature--Living organisms | |
| 19.040 | K04 | GB/T 4797.4-1989 | 电工电子产品自然环境条件 太阳辐射与温度 | Environmental conditions appearing in nature for electric and electronic products？Solar radiation and temperature | |
| 19.040 | K04 | GB/T 4797.5-1992 | 电工电子产品自然环境条件 降水和风 | Environmental conditions appearing in nature of electric and electronic products？Precipitation and wind | NEQ IEC 60721-2-2-88 |
| 19.040? | K04 | GB/T 4797.6-1995 | 电工电子产品自然环境条件 尘、沙、盐雾 | Environmental conditions appearing in nature of electric and electronic products--Dust,sand,salt mist | NEQ IEC 60721-2-5 |
| 19.040 | K04 | GB/T 4798.1-1986 | 电工电子产品应用环境条件 贮存 | Environmental conditions existing in the application of electric and electronic products--Storage | |
| 19.040 | K04 | GB/T 4798.3-1990 | 电工电子产品应用环境条件 有气候防护场所固定使用 | Environmental conditions existing in the application for electric and electronic products - Stationary use at weather-protected locations | |
| 19.040 | A21 | GB/T 4798.4-1990 | 电工电子产品应用环境条件 无气候防护场所固定使用 | Environmental conditions existing in the application for electric and electronic products - Stationary use at non-weather-protected locations | NEQ IEC 60721-3-4 |
| 19.040 | A21 | GB/T 4798.5-1987 | 电工电子产品应用环境条件 地面车辆使用 | Enviromental conditions existing in the application of electric and electronic products--Ground vehicle installations | NEQ IEC 60721-3-5-85 |
| 19.020 | K04 | GB/T 4798.6-1996 | 电工电子产品应用环境条件 船用 | Environmental conditions existing in the application of electric and electronic products ship environment | IDT IEC 60721-3-6-1987 |
| 19.040 | A21 | GB/T 4798.7-1987 | 电工电子产品应用环境条件 携带和非固定使用 | Environmental conditions existing in the application of electric and electronic products--Portable and non-statonary use | EQV IEC 60721-3-7-86 |
| 19.040 | K04 | GB/T 4798.10-1991 | 电工电子产品应用环境条件 导言 | Environmental conditions existing in the application of electric and electronic products？Introduction | NEQ IEC 60721-3-0-84 |
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
国際整合 |
| 19.040 | K04 | GB/T 5170.16-1985 | 电工电子产品环境试验设备基本参数检定方法 恒加速度试验用离心式试验机 | Inspection methods for basic parameters of envirormental testing equipments for electric and electronic products--Centrifugal machines for constant acceleration test | |
| 19.040 | K04 | GB/T 5170.1-1995 | 电工电子产品环境试验设备基本参数检定方法 总则 | Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--General | |
| 19.080 | K04 | GB/T 5170.2-1996 | 电工电子产品环境试验设备基本参数检定方法 温度试验设备 | Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Temperature testing equipments | |
| 19.040 | K04 | GB/T 5170.5-1996 | 电工电子产品环境试验设备基本参数检定方法 湿热试验设备 | Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Damp heat testing equipments | |
| 19.040 | K04 | GB/T 5170.8-1996 | 电工电子产品环境试验设备基本参数检定方法 盐雾试验设备 | Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Salt mist testing equipments | |
| 19.080 | K04 | GB/T 5170.9-1996 | 电工电子产品环境试验设备基本参数检定方法 太阳辐射试验设备 | Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Solar radiation testing equipments | |
| 19.080 | K04 | GB/T 5170.10-1996 | 电工电子产品环境试验设备基本参数检定方法 高低温低气压试验设备 | Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Combined high and low temperature/low air pressure testing equipments | |
| 19.040 | K04 | GB/T 5170.11-1996 | 电工电子产品环境试验设备基本参数检定方法 腐蚀气体试验设备 | Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Corrosive gas testing equipments | |
| 19.040 | K04 | GB/T 5170.13-1985 | 电工电子产品环境试验设备基本参数检定方法 振动 (正弦) 试验用机械振动台 | Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Mechanical vibrating type mechines for vibration (sinusoidal ) test | |
| 19.040 | K04 | GB/T 5170.14-1985 | 电工电子产品环境试验设备基本参数检定方法 振动 (正弦) 试验用电动振动台 | Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Electrodynamic vibrating type machines for vibration (sinusoidal) test | |
| 19.040 | K04 | GB/T 5170.15-1985 | 电工电子产品环境试验设备基本参数检定方法 振动 (正弦) 试验用液压振动台 | Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Hydraulic vibrating type machines for vibration (sinusoidal) test | |
| 19.040 | K04 | GB/T 5170.17-1987 | 电工电子产品环境试验设备基本参数检定方法 低温/低气压/湿热综合顺序试验设备 | Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Combined sequential cold/low air pressure and damp heat testing equipments | |
| 19.040 | K04 | GB/T 5170.18-1987 | 电工电子产品环境试验设备基本参数检定方法 温度/ 湿度组合循环试验设备 | Inspection methods for basic parameters of environmental testing epuipments for electric and electronic products--Composite temperature/humidity cyclic testing equipments | |
| 19.040 | K04 | GB/T 5170.19-1989 | 电工电子产品环境试验设备基本参数检定方法 温度/ 振动 (正弦) 综合试验设备 | Inspection methods for basic parameters of environmental testing equipments for electric and electronic products - Combined temperature/vibration (sinusoidal) testing equipments | NEQ DIN 40046-78 |
| 19.040 | K04 | GB/T 5170.20-1990 | 电工电子产品环境试验设备基本参数检定方法 水试验设备 | Inspection methods for basic parameters of environmental testing equipments for electric and electronic products？Water testing equipments | |
| 19.120 | A28 | GB/T 5329-1985 | 试验筛与筛分试验 术语 | Test sieves and test sieving--Vocabulary | EQV ISO 2395-72 |
| 19.120 | A28 | GB/T 5330-1985 | 工业用金属丝编织方孔筛网 | Industrial woven metal wire cloth (square openning series) | NEQ ISO 4783/2-81 |
| 19.120 | A28 | GB/T 5330.1-2000 | 工业用金属筛网和金属丝编织网 网孔尺寸与金属丝直径组合选择指南 通则 | Industrial wire screens and woven wire cloth--Guide to the choice of aperture size and wire diameter combinations--Part 1: Generalities | EQV ISO 4783-1:1989 |
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
国際整合 |
| 19.120 | A28 | GB/T 6003.1-1997 | 金属丝编织网试验筛 | Test sieves of metal wire cloth | EQV ISO 3310-1:1990 |
| 19.120 | A28 | GB/T 6003.2-1997 | 金属穿孔板试验筛 | Test sieves of perforated metal plate | EQV ISO 3310-2:1990 |
| 19.120 | A28 | GB/T 6003.3-1999 | 电成型薄板试验筛 | Test sieves of electroformed sheets | EQV ISO 3310-3:1990 |
| 19.120 | A28 | GB/T 6005-1997 | 试验筛 金属丝编织网、穿孔板和电成型薄板筛孔的基本尺寸 | Test sieves--Metal wire cloth, perforated metal plate and electroformed sheet--Nominal sizes of opening | EQV ISO 565:1990 |
| 19.060 | N71 | GB/T 6269-1997 | 布氏硬度计的检验 | Verification of Brinell hardness testers | IDT ISO 156:1982 |
| 19.060 | N71 | GB/T 6270-1997 | 标准布氏硬度块的标定 | Calibration of standardized blocks to be used for Brinell hardness | IDT ISO 726:1982 |
| 19.040 | L84 | GB/T 6587.4-1986 | 电子测量仪器 振动试验 | Vibration tests for electronic measuring instruments | |
| 19.040 | L84 | GB/T 6587.1-1986 | 电子测量仪器 环境试验总纲 | Environmental tests program for electronic measuring instruments | |
| 19.040 | L84 | GB/T 6587.2-1986 | 电子测量仪器 温度试验 | Temperature tests for electronic measuring instruments | |
| 19.040 | L84 | GB/T 6587.3-1986 | 电子测量仪器 湿度试验 | Humidity tests for electronic measuring instruments | |
| 19.040 | L84 | GB/T 6587.5-1986 | 电子测量仪器 冲击试验 | Shock tests for electronic measuring instruments | |
| 19.040 | L84 | GB/T 6587.6-1986 | 电子测量仪器 运输试验 | Transportation tests for electronic measuring instruments | |
| 19.040 | L84 | GB/T 6587.7-1986 | 电子测量仪器 基本安全试验 | Basic safty tests for electronic measuring instruments | |
| 19.040 | L84 | GB/T 6587.8-1986 | 电子测量仪器 电源频率与电压试验 | Line frequency and voltage tests for electronic measuring instruments | |
| 19.080 | L84 | GB/T 6592-1996 | 电工和电子测量设备性能表示 | Expression of the performance of electrical and electronic measuring equipment | IDT IEC 60359-1987 |
| 19.040 | K04 | GB/T 6999-1986 | 环境试验用相对湿度查算表 | Relative humidity tables for environmental test | |
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
国際整合 |
| 19.080 | L32 | GB/T 7265.1-1987 | 固体电介质微波复介电常数的测试方法 微扰法 | Test method for complex permittivity of solid dielectric materials at microwave frequencies--Perturbation method | |
| 19.080 | L32 | GB/T 7265.2-1987 | 固体电介质微波复介电常数的测试方法 "开式腔"法 | Test method for the complex permittivity of solid dielectric materials at microwave frequencies--" Open cavity" method | |
| 19.020 | L05 | GB/T 7288.1-1987 | 设备可靠性试验 推荐的试验条件 室内便携设备 粗模拟 | Equipment reliability testing--Preferred test conditions indoor portable equipment--Low degree of simulation | IDT IEC 60605-3-1-86 |
| 19.020 | L05 | GB/T 7288.2-1987 | 设备可靠性试验 推荐的试验条件 固定使用在有气候防护场所设备 - 精模拟 | Equipment reliability testing--Preferred test conditions--Equipment for stationary use in weather protected locations--High degree of simulation | IDT IEC 60605-3-2-86 |
| 19.100 | J04 | GB/T 7704-1987 | Ｘ射线应力测定方法 | Residual stress measurement by X-ray | |
| 19.020 | A20 | GB/T 7826-1987 | 系统可靠性分析技术 失效模式和效应分析(FMEA)程序 | Analysis techniques for system reliability--Procedure for failure mode and effects analysis(FMEA) | IDT IEC 60812-85 |
| 19.020 | A20 | GB/T 7827-1987 | 可靠性预计程序 | Reliability prediction procedure | NEQ MIL-STD-756 |
| 19.020 | A20 | GB/T 7828-1987 | 可靠性设计评审 | Reliability design reviews | |
| 19.020 | A20 | GB/T 7829-1987 | 故障树分析程序 | Procedure for fault tree analysis | NEQ IEC 60056 |
| 19.040 | F80 | GB/T 8993-1998 | 核仪器环境条件与试验方法 | Environmental conditions and testing procedures for nuclear instrumentation | |
| 19.060 | N73 | GB/T 9238-1998 | 平衡机及其仪器仪表用图形符号 | Symbols for balancing machines and associated instrumentation | IDT ISO 3719:1994 |
| 19.100 | J04 | GB/T 9445-1999 | 无损检测人员资格鉴定与认证 | Qualification and certification for nondestructive testing personnel | IDT ISO 9712:1992 |
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
国際整合 |
| 19.120 | A28 | GB/T 10061-1988 | 筛板筛孔的标记方法 | Screen plants--Codification for designating perforations | EQV ISO 7806-83 |
| 19.060 | N73 | GB/T 10179-1988 | 液压伺服振动试验设备特性的描述方法 | Servo-hydraulic test equipment for generating vibration--Method of describing characteristics | EQV ISO/DIS 8626 |
| 19. | N04 | GB/T 10586-1989 | 湿热试验箱技术条件 | Specification for damp heat test chambers | NEQ IEC 60068-2-3-80 |
| 19. | N04 | GB/T 10587-1989 | 盐雾试验箱技术条件 | Specification for salt mist test chambers | NEQ IEC 60068-2-11-83 |
| 19. | N04 | GB/T 10588-1989 | 长霉试验箱技术条件 | Specification for mould growth test chambers | NEQ IEC 60068-2-10-83 |
| 19. | N04 | GB/T 10589-1989 | 低温试验箱技术条件 | Specification for low temperature test chambers | NEQ IEC 60068-2-1-81 |
| 19. | N04 | GB/T 10590-1989 | 低温/ 低气压试验箱技术条件 | Specification for low temperature/low air pressure test chambers | NEQ IEC 60068-2-40-83 |
| 19. | N04 | GB/T 10591-1989 | 高温/ 低气压试验箱技术条件 | Specification for high temperature/low air pressure test chambers | NEQ IEC 60068-2-40-83 |
| 19.120 | A28 | GB/T 10611-1989 | 工业用网 网孔 尺寸系列 | Wire screens and plate screens for industrial purposes - Nominal size of spertures | EQV ISO 2194-72 |
| 19.120 | A28 | GB/T 10612-1989 | 板厚<3mm的圆孔和方孔筛板 | Round and square perforation plate screens - Thickness of below 3 mm | NEQ ISO 7805/2-86 |
| 19.120 | A28 | GB/T 10613-1989 | 板厚≥3 mm的圆孔和方孔筛板 | Round and square perforation plate screens？Thickness of 3 mm and above | NEQ ISO 7805/1-84 |
| 19.040 | L04 | GB/T 11279-1989 | 电子元器件环境试验使用导则 | Guide to the application to environmental tests to electronic components | |
| 19.100 | H24 | GB/T 11343-1989 | 接触式超声斜射探伤方法 | Ultrasonic angle beam examination by the contact method | |
| 19.100 | H24 | GB/T 11344-1989 | 接触式超声波脉冲回波法测厚 | Measuring thickness by ultrasonic pulse-echo contact method | |
| 19.040 | N50 | GB/T 11606.1-1989 | 分析仪器环境试验方法 总则 | The method of environmental test for analytical instruments - General | |
| 19.040 | N50 | GB/T 11606.2-1989 | 分析仪器环境试验方法 电源频率与电压试验 | The method of environmental test for analytical instruments？Line frequency and voltage test | |
| 19.040 | N50 | GB/T 11606.3-1989 | 分析仪器环境试验方法 低温试验 | The method of environmental test for analytical instruments - Cold test | |
| 19.040 | N50 | GB/T 11606.4-1989 | 分析仪器环境试验方法 高温试验 | The method of environmental test for analytical instruments？High temperature test | |
| 19.040 | N50 | GB/T 11606.5-1989 | 分析仪器环境试验方法 温度变化试验 | The method of environmental test for analytical instruments - Change of temperature test | |
| 19.040 | N50 | GB/T 11606.6-1989 | 分析仪器环境试验方法 恒定湿度试验 | The method of environmental test for analytical instruments - Damp heat, steady state | |
| 19.040 | N50 | GB/T 11606.7-1989 | 分析仪器环境试验方法 交变湿热试验 | The method of environmental test for analytical instruments - Damp heat, cyclic | |
| 19.040 | N50 | GB/T 11606.8-1989 | 分析仪器环境试验方法 振动试验 | The method of environmental test for analytical instruments - Vibration test | |
| 19.040 | N50 | GB/T 11606.9-1989 | 分析仪器环境试验方法 磁场试验 | The method of environmental test for analytical instruments - Magnetic field test | |
| 19.040 | N50 | GB/T 11606.10-1989 | 分析仪器环境试验方法 气压试验 | The method of environmental test for analytical instruments - Low air pressure test | |
| 19.040 | N50 | GB/T 11606.11-1989 | 分析仪器环境试验方法 砂尘试验 | The method of environmental test for analytical instruments - Sand and dust content of the air test | |
| 19.040 | N50 | GB/T 11606.12-1989 | 分析仪器环境试验方法 长霉试验 | The method of environmental test for analytical instruments - Mould growth test | |
| 19.040 | N50 | GB/T 11606.13-1989 | 分析仪器环境试验方法 盐雾试验 | The method of environmental test for analytical instruments - Salt mist test | |
| 19.040 | N50 | GB/T 11606.14-1989 | 分析仪器环境试验方法 低温贮存试验 | The method of environmental test for analytical insturments？Cold storage test | |
| 19.040 | N50 | GB/T 11606.15-1989 | 分析仪器环境试验方法 高温贮存试验 | The method of environmental test for analytical instruments？High temperature storage test | |
| 19.040 | N50 | GB/T 11606.16-1989 | 分析仪器环境试验方法 跌落试验 | The method of environmental test for analytical instruments - Fall down test | |
| 19.040 | N50 | GB/T 11606.17-1989 | 分析仪器环境试验方法 碰撞试验 | The method of environmental test for analytical instruments - Pump test | |
| 19.040 | K04 | GB/T 11804-1989 | 电工电子产品环境条件术语 | Terms of environmental conditions for electric and electronic products | |
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
国際整合 |
| 19.040 | N30 | GB/T 12085.15-1995 | 光学和光学仪器 环境试验方法 宽带随机振动(中再现性)与高温、低温综合试验 | Optics and optical instruments--Environmental test methods--Combined random vibration wideband--Reproducibility medium, in dry heat or cold | EQV ISO/DIS 9022/15 |
| 19.040;
37.020 |
N30 | GB/T 12085.16-1995 | 光学和光学仪器 环境试验方法 弹跳或恒加速度与高温、低温综合试验 | Optics and optical instruments--Environmental test methods--Combined bounce or steady state acceleration,in dry heat or cold | EQV ISO DIS 9022/16 |
| 19.040;
[37.020] |
N30 | GB/T 12085.17-1995 | 光学和光学仪器 环境试验方法 污染与太阳辐射综合试验 | Optics and optical instruments--Environmental test methods--Combined contamination, solar radiation | EQV ISO DIS 9022/17 |
| 19.040 | A25 | GB/T 12454-1990 | 视觉环境评价方法 | A method of evaluating the visual environment | |
| 19.100 | J04 | GB/T 12604.9-1996 | 无损检测术语 红外检测 | Terminology for nondestructive testing--Infrared testing | NEQ BS 4489-1995 |
| 19.020 | K85 | GB/T 12637-1990 | 太阳摸拟器通用规范 | General specification for solar simulator | |
| 19.040 | K20 | GB/T 12665-1990 | 电机在一般环境条件下使用的湿热试验要求 | Requirements of damp-heat testing of electrical machine for service in general environmental condition | |
| 19.040 | J04 | GB/T 14091-1993 | 机械产品环境参数分类及其严酷程度分级 | Classification of environmental parameters and their severities for machinery products | NEQ IEC 60721-1 |
| 19.040 | J04 | GB/T 14092.1-1993 | 机械产品环境条件 湿热 | Environmental condition for machinery products Warm-damp | |
| 19.040 | A21 | GB/T 14092.2-1993 | 机械产品环境条件 寒冷 | Environmental condition for machinery products--Cold | |
| 19.040 | A21 | GB/T 14092.3-1993 | 机械产品环境条件 高海拔 | Environmental condition for machinery products--High altitude | |
| 19.040 | A21 | GB/T 14092.4-1993 | 机械产品环境条件 海洋 | Environmental condition for machinery products--Ocedn | |
| 19.040 | A21 | GB/T 14092.5-1993 | 机械产品环境条件 工业腐蚀 | Environmental condition for machinery products--Industrial corrosion | |
| 19.040 | A21 | GB/T 14092.6-1993 | 机械产品环境条件 矿山 | Environmental condition for machinery products--Mine | |
| 19.040 | A21 | GB/T 14092.7-1997 | 机械产品环境条件 干热 | Environmental condition for machinery products--Dry heat | |
| 19.040 | J04 | GB/T 14093.1-1993 | 机械产品环境技术要求 湿热环境用 | Environmental technical requirements of machinery products for the warm-damp environments | |
| 19.040 | A21 | GB/T 14093.2-1993 | 机械产品环境技术要求 寒冷环境用 | Environment technical requirements of machinery products for cold environment | |
| 19.040 | A21 | GB/T 14093.3-1993 | 机械产品环境技术要求 高原环境用 | Environmental technical requirements of machinery products for plateau environment | |
| 19.040 | A21 | GB/T 14093.4-1993 | 机械产品环境技术要求 工业腐蚀环境用 | Environmental technical requirements of machinery products for the industrial corrosion environments | |
| 19.040 | A21 | GB/T 14093.5-1997 | 机械产品环境技术要求 干热环境用 | Environmental technical requirements of machinery products for dry heat environment | |
| 19.040 | A21 | GB/T 14093.6-1997 | 机械产品环境技术要求 海洋环境用 | Environmental technical requirements of machinery products for ocean environment | |
| 19.040 | A21 | GB/T 14522-1993 | 机械工业产品用塑料、涂料、橡胶材料人工气候加速试验方法 | Accelerated weathering test method for plastics, coatings and rubber materials used for machinery industrial products | NEQ ASTM G 53-84 |
| 19.080 | K43 | GB/T 14537-1993 | 量度继电器和保护装置的冲击与碰撞试验 | Shock and bump tests on measuring relays and protection equipment | IDT IEC 60255-21-2 |
| 19.040 | K04 | GB/T 14597-1993 | 电工产品不同海拔的气候环境条件 | Environmental climatic conditions appearing in different higher lands for electrical products | |
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
国際整合 |
| 19.060 | A80 | GB/T 15099-1994 | 使用冲击试验机测定产品脆值的试验方法 | Test methods for mechanical shock fragility of products, using shock machines | NEQ ASTM D3332-88 |
| 19.040? | L15 | GB/T 15430-1995 | 红外探测器环境试验方法 | Environmental testing methods for infrared detectors | NEQ IEC 60068 |
| 19.120 | A28 | GB/T 15445-1995 | 颗粒粒度分析结果的图形表征 | Graphical representation of results of particle size analysis | NEQ ISO 9276-1-90 |
| 19.100 | J04 | GB/T 15823-1995 | 氦泄漏检验 | Examination for helium leak detecting | |
| 19.120 | A28 | GB/T 16418-1996 | 颗粒系统术语 | Particle system--Vocabulary | |
| 19.060 | N71 | GB/T 16491-1996 | 电子式万能试验机 | Electronic universal testing machines | |
| 19.080 | L85 | GB/T 16511-1996 | 电气和电子测量设备随机文件 | Electrical and electronic measuring equipment--Documentation | IDT IEC 61187-1993 |
| 19.060 | N71 | GB/T 16825-1997 | 拉力试验机的检验 | Verification of tensile testing machines | IDT ISO 7500-1:1986 |
| 19.060 | N71 | GB/T 16826-1997 | 电液式万能试验机 | Electro-hydraulic universal testing machines | |
| 19.080 | K40 | GB/T 16927.1-1997 | 高电压试验技术 第一部分: 一般试验要求 | Hign voltsge test techniques--Part 1: General test requirements | EQV IEC 60060-1:1989 |
| 19.080 | K40 | GB/T 16927.2-1997 | 高电压试验技术 第二部分: 测量系统 | High voltage test techniques--Part 2: Measuring systems | EQV IEC 60060-2-1994 |
| 19.100 | J04 | GB/T 17455-1998 | 无损检测 表面检测的金相复制件技术 | Non-destructive testing--Metallographic replica techniques of surface examination | IDT ISO 3057-74 |
| 19.080 | K40 | GB/T 18134.1-2000 | 极快速冲击高电压试验技术 第一部分：气体绝缘变电站中陡波前过电压用测量系统 | High-voltage testing techniques with very fast impulses Part 1: Measuring systems for very fast front overvoltages generated in gas-insulated substations | IDT IEC 61321-1:1994 |
| ICS 国際規格分類 |
中国標準分類 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
国際整合 |
ご意見、ご要望、ご質問 は、