on 09/22/2002 14:14:08 GMT by H.Ishiguro
on 09/22/2002 14:14:08 GMT by H.Ishiguro
| A | 鋼、鋳物、メッキ等(Ferrous Materials) |
|---|---|
| B | 非鉄金属、導線、冶金等(Nonferrous Materials) |
| C | セメント、セラミック、床材、ガラス等(Cementitious,Ceramic,Concrete, and Masonry Materia) |
| D | ペンキ、石油類、紙、ゴム、プラスチック等(Miscellancous Materials) |
| E | 金属関連の試験方法等(Miscellancous Subjects) |
| F | 特定用途材料(Materials for Specific Applications) |
| G | 金属の腐食、疲労、劣化等(Corrosion,Deterioration, and Degradation od Materi) |
| 国際整合 | 規格番号 | 規格名称(中国語) |  規格名称(英語) |
|---|---|---|---|
| NEQ ASTM A99-82 | GB/T 3795-1996 | 锰铁 | Ferromanganese |
| NEQ ASTM A100-80 | GB/T 2272-1987 | 硅铁 | Ferrosilicon |
| NEQ ASTM A101-80 | GB/T 5683-1987 | 铬铁 | Ferrochromium |
| NEQ ASTM A101-85 | GB/T 5684-1987 | 真空法微碳铬铁 | Vacuum extra low carbon ferrochromium |
| NEQ ASTM A102-81 | GB/T 4139-1987 | 钒铁 | Ferrovanadium |
| NEQ ASTM A105-80 | GB/T 12228-1989 | 通用阀门 碳素钢锻件技术条件 | General purpose industrial valves - Specification of carbon steel forgings |
| EQV ASTM A112.19.2M:1995 | GB/T 6952-1999 | 卫生陶瓷 | Sanitary wares |
| NEQ ASTM A132-84 | GB/T 3649-1987 | 钼铁 | Ferromolybdenum |
| NEQ ASTM A216 | GB/T 12229-1989 | 通用阀门 碳素钢铸件技术条件 | General purpose industrial valves - Specification of carbon steel castings |
| NEQ ASTM A216-82 | GB/T 7659-1987 | 焊接结构用碳素钢铸件 | Carbon steel castings suitable for welded structure |
| NEQ ASTM A231/A231M:1991 | GB/T 5218-1999 | 合金弹簧钢丝 | Alloy spring steel wires |
| NEQ ASTM A 264-90 | GB/T 6396-1995 | 复合钢板力学及工艺性能试验方法 | Clad plates--Machanical and technological test |
| NEQ ASTM A295:1994 | GB/T 18254-2000 | 高碳铬轴承钢 | High-carbon chromium bearing steel |
| NEQ ASTM A295:1994 | GB/T 18579-2001 | 高碳铬轴承钢丝 | High-carbon chromium bearing steel wires |
| NEQ ASTM A304-79 | GB/T 5216-1985 | 保证淬透性结构钢技术条件 | Technical requirements for structural steel with specified hardenability bands |
| NEQ ASTM A335-90 | GB 5310-1995 | 高压锅炉用无缝钢管 | Seamless steel tubes and pipes for high pressure boiler |
| NEQ ASTM A481-79 | GB/T 3211-1987 | 金属铬 | Chromium metal |
| NEQ ASTM A483-88 | GB/T 4008-1996 | 锰硅合金 | Ferromanganese-silicon |
| NEQ ASTM A 500:1990 | GB/T 3094-2000 | 冷拔异型钢管 | Cold drawn shaped steel tubes |
| EQV ASTM A532/A532M:1993 | GB/T 8263-1999 | 抗磨白口铸铁件 | Abrasion-resistant white iron castings |
| NEQ ASTM A550-78(1985) | GB/T 7737-1997 | 铌铁 | Ferroniobium |
| NEQ ASTM A600-79 | GB/T 9943-1988 | 高速工具钢棒技术条件 | High speed tool steel bars--Technical requirements |
| NEQ ASTM A 681:1994 | GB/T 1299-2000 | 合金工具钢 | Alloy tool steels |
| NEQ ASTM A686-79 | GB/T 1298-1986 | 碳素工具钢技术条件 | Carbon tool steels--Technical requirements |
| NEQ ASTM A700:1990 | GB/T 247-1997 | 钢板和钢带检验、包装、标志及质量证明书的一般规定 | General rule of acceptance,package,mark and certification for steel plates(sheets) and strips |
| NEQ ASTM A700-78 | GB/T 2102-1988 | 钢管的验收、包装、标志和质量证明书 | Acceptance, packing, marking, and certification of pipe |
| NEQ ASTM A752 | GB/T 3079-1993 | 合金结构钢丝 | Alloy structure steel wires |
| 国際整合 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
| NEQ ASTM B1-70 | GB/T 3953-1983 | 电工圆铜线 | Round copper wire for electrical purposes |
| NEQ ASTM B26/B26M:1992 | GB/T 9438-1999 | 铝合金铸件 | Aluminium alloy castings |
| NEQ ASTM B26-92 | GB/T 1173-1995 | 铸造铝合金 | Casting aluminium alloys |
| NEQ ASTM B33-81 | GB/T 4909.9-1985 | 裸电线试验方法 镀层连续性试验 多硫化钠法 | Test methods for bare wires--Test for continuity of coating--Sodium polysulfide solution method |
| NEQ ASTM B33-81 | GB/T 4909.11-1985 | 裸电线试验方法 镀层附着性试验 | Test methods for bare wires--Test for adherence of coating |
| NEQ ANSI/ASTM B33-81【旧版】 | GB/T 4910-1985 | 镀锡圆铜线 | Tinned round copper wire |
| NEQ ASTM B69-79 | GB/T 1978-1988 | 电池锌板 | Zinc plate for dry cell |
| EQV ASTM B70:1990(1995) | GB/T 4067-1999 | 金属材料电阻温度特征参数的测定 | Testing method for electrical resistance-temperature characteristicparameters of metallic materials |
| NEQ ASTM B84-81 | GB/T 6148-1985 | 精密电阻合金电阻温度系数测试方法 | Test method for temperature-resistance coefficient of precision resistance alloys |
| NEQ ASTM B 86-88 | GB/T 13821-1992 | 锌合金压铸件 | Zinc alloy die castings |
| NEQ ASTM B106-78 | GB/T 5987-1986 | 热双金属温曲率试验方法 | Test method for flexivity of thermostat metals |
| NEQ ASTM B160-81 | GB/T 4435-1984 | 镍及镍铜合金棒 | Nickel and nickel-copper alloys round bars |
| NEQ ASTM B209 | GB/T 3880-1997 | 铝及铝合金轧制板材 | Aluminium and aluminium alloy rolled sheet |
| EQV ASTM B 223:1985(1991年确认) | GB/T 5986-2000 | 热双金属弹性模量试验方法 | Test method for modulus of elasticity of thermostat metals |
| NEQ ASTM B230 | GB/T 3195-1997 | 导电用铝线 | Aluminium wires for electric conduction purporse |
| NEQ ASTM B230-77 | GB/T 3955-1983 | 电工圆铝线 | Round aluminium wire for electrical purposes |
| NEQ ASTM B265 I级钛板 | GB/T 14845-1993 | 板式换热器用钛板 | Titanium sheet for plate heat exchangers |
| NEQ ASTM B280,B743 | GB/T 17791-1999 | 空调与制冷用无缝铜管 | Specification for seamless copper tube for air conditioning and refrigeration field service |
| EQV ASTM B313-82 | GB/T 10571-1989 | 铝及铝合金焊接管 | Wrought aluminium and aluminium alloy - Welded tube |
| NEQ ASTM B337-83(92) | GB/T 3624-1995 | 钛及钛合金管 | Titanium and titanium alloy tubes |
| NEQ ASTM B338-91 | GB/T 3625-1995 | 换热器及冷凝器用钛及钛合金管 | Titanium and titanium alloy tubes for condensers and heat exchangers |
| NEQ ASTM B342-67 | GB/T 12966-1991 | 铝合金电导率涡流测试方法 | The method for electrical conductivity measurement of aluminium alloys by use of eddy current |
| NEQ ASTM B350-84 | GB/T 8767-1988 | 核工业用锆及锆合金铸锭 | Zirconium and zirconium alloy ingots for nuclear application |
| NEQ ASTM B351-83 | GB/T 8769-1988 | 核工业用锆及锆合金棒材和线材 | Zirconium and zirconium alloy bars and wires for nuclear application |
| NEQ ASTM B353-83 | GB/T 8768-1988 | 核工业用锆及锆合金无缝管 | Zirconium and zirconium alloy seamless tubes for nuclear application |
| EQV ASTM B355-80 | GB/T 11019-1989 | 镀镍圆铜线 | Nickel coated round copper wire |
| NEQ ASTM B 365-86 | GB/T 14841-1993 | 钽及钽合金棒材 | Tantalum and tantalum alloy rods and bars |
| NEQ ASTM B367-87 | GB/T 6614-1994 | 钛及钛合金铸件 | Titanium and titanium alloy castings |
| NEQ ASTM B367-87 | GB/T 15073-1994 | 铸造钛及钛合金牌号和化学成分 | Designation and chemical composition of cast titanium and titanium alloys |
| NEQ ASTM B376-80 | GB/T 10421-1989 | 烧结金属摩擦材料 密度的测定 | Sintered metal friction materials - Determination of density |
| NEQ ASTM B378-80 | GB/T 10422-1989 | 烧结金属摩擦材料 横向断裂强度的测定 | Sintered metal friction materials - Determination of transverse rupture strength |
| NEQ ASTM B387:1999 | GB/T 17792-1999 | 钼及钼合金棒 | Specification for molybdenum and molybdenum alloy bar |
| NEQ ASTM B390-80 | GB/T 15243-1994 | 焦化粘油类产品密度测定方法 | Viscous oil products of coal carbonization--Determination of density |
| NEQ ASTM B 392-84 | GB/T 14842-1993 | 铌棒材 | Niobium rods and bars |
| NEQ ASTM B394-78 | GB/T 8183-1987 | 铌无缝管 | Niobium seamless tubes |
| EQV ASTM B421-76 | GB/T 5167-1985 | 烧结金属材料和硬质合金电阻率的测定 | Sintered metal materials and hardmetals--Determination of electrical resistivity |
| NEQ ASTM B430-79 | GB/T 6524-1986 | 金属粉末粒度分布的测定--光透法 | Determination of particle size distribution of metallic powders by method of photosedimentation |
| NEQ ASTM B521-82 | GB/T 8182-1987 | 钽及钽合金无缝管 | Tantalum and tantalum alloy seamless tubes |
| NEQ ASTM B525-83a | GB/T 13827-1992 | 烧结奥氏体不锈钢结构零件技术条件 | Standard specification for sintered austenitic stainless steel structural part |
| NEQ ANSI/ASTM B567-79 | GB/T 4677.8-1984 | 印制板镀涂覆层厚度测试方法 β反向散射法 | Test method of plating and coating thickness by beta backscattering for printed boards |
| NEQ ASTM B 569:1998 | GB/T 11087-2001 | 散热器冷却管专用黄铜带 | Brass strip for heat-exchanger tubing |
| NEQ ASTM B594:1997 | GB/T 6519-2000 | 变形铝合金产品超声波检验方法 | Process for ultrasonic inspection of wrought aluminum alloy products |
| NEQ ASTM B 708-91 | GB/T 3628-1995 | 钽及钽合金箔材 | Tantalum and tantalum alloy foils |
| NEQ ASTM B713-82 | GB/T 13811-1992 | 超导材料术语 | Terms for superconducting materials |
| 国際整合 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
| NEQ ASTM C76:1995 | GB/T 11836-1999 | 混凝土和钢筋混凝土排水管 | Concrete and reinforced concrete sewer pipes |
| EQV ASTM C97:1996 | GB/T 9966.3-2001 | 天然饰面石材试验方法 第3部分: 体积密度、真密度、真气孔率、吸水率试验方法 | Test methods for natural facing stones Part 3: Test methods for bulk density,true density,true porosity and water absorption |
| NEQ ASTM C165-83 | GB/T 13480-1992 | 矿物棉制品压缩性能试验方法 | Test method for measuring compressive properties of mineral wool products |
| EQV ASTM C170-90 | GB/T 9966.1-2001 | 天然饰面石材试验方法 第1部分: 干燥、水饱和、冻融循环后压缩强度试验方法 | Test methods for natural facing stones Part 1: Dry,wet and after freezing test methods for compressive strength |
| NEQ ASTM C188-89 | GB/T 208-1994 | 水泥密度测定方法 | Standard test method for cement density |
| NEQ ASTM C204-81 | GB/T 8074-1987 | 水泥比表面积测定方法 勃氏法 | Testing method for specific surface of cement--Blaine method |
| NEQ ASTM C 272-53 | GB/T 14207-1993 | 夹层结构或芯子吸水性试验方法 | Test method for water absorption of sandwich constructions or cores |
| NEQ ASTM C 323-1980 | GB/T 16399-1996 | 粘土化学分析方法 | Method for chemical analysis of clay |
| NEQ ASTM C 346-1976 | GB/T 3295-1996 | 陶瓷制品45°镜向光泽度试验方法 | Standard test method for 45°specular gloss of ceramic ware |
| NEQ ASTM C356:87(1997) | GB/T 5486.4-2001 | 无机硬质绝热制品 试验方法 匀温灼烧性能 | Test methods of inorganic rigid thermal insulation--Properties of ter heat soaking |
| NEQ ASTM C 373-1977 | GB/T 3299-1996 | 日用陶瓷器吸水率测定方法 | Standard test method for water absorption of domestic ceramic ware |
| NEQ ASTM C411-82 | GB/T 17430-1998 | 绝热材料最高使用温度的评估方法 | Estimating the maximum use temperature of thermal insulation |
| EQV ASTM C421-83 | GB/T 12812-1991 | 硬质泡沫塑料滚动磨损试验方法 | Test method for tumbling friability of rigid cellular plastics |
| NEQ ASTM C452:1995 | GB/T 749-2001 | 硅酸盐水泥在硫酸盐环境中的潜在膨胀性能试验方法 | Test method for potential expansion of portland cement mortars exposed to sulfate |
| NEQ ASTM C534:1994 | GB/T 17794-1999 | 柔性泡沫橡塑绝热制品 | Preformed flexible elastomeric cellular thermal insulation |
| NEQ ASTM C553-77 | GB/T 5480.7-1987 | 矿物棉制品吸湿性试验方法 | Test method for the moisture absorption of mineral wool products |
| NEQ ASTM C559-77 | GB/T 6154-1985 | 炭素材料体积密度测定方法 | Carbon materials--Determination of the bulk density |
| NEQ ANSI/ASTM C573-76【廃版】 | GB/T 6900.5-1986 | 粘土、高铝质耐火材料化学分析方法 过氧化氢光度法测定二氧化钛量 | Fireclay and high-alumina refractories--Determination of titanium dioxide content--Hydrogen peroxide photometric method |
| NEQ ASTM C573-81 | GB/T 6609.7-1986 | 氧化铝化学分析方法 三辛基氧化膦 -硫氰酸盐光度法测定二氧化钛量 | Methods for chemical analysis of aluminium oxide--The trioctylphosphine oxide-thiocyanate photometric method for the determination of titanium dioxide content |
| NEQ ASTM C573-81 | GB/T 6609.8-1986 | 氧化铝化学分析方法 二苯基碳酰二肼光度法测定三氧化二铬量 | Methods for chemical analysis of aluminium oxide--The diphenyl carbazide photometric method for the determination of chromium sesquioxide content |
| NEQ ASTM C573-81 | GB/T 6609.9-1986 | 氧化铝化学分析方法 二乙基二硫代氨基甲酸铅光度法测定氧化铜量 | Methods for chemical analysis of aluminium oxide--The lead diethyldithiocarbamate photometric method for the determination of cupric oxide content |
| NEQ ASTM C 573-81 | GB/T 14351-1993 | 熔铸氧化铝耐火材料化学分析方法 | Chemical analysis methods for fuse cast alumina refractories |
| NEQ ASTM C575-70 | GB/T 6901.3-1986 | 硅质耐火材料化学分析方法 氢氟酸重量法测定二氧化硅量 | Silica refractories--Determination of silicon dioxide content--Hydrofluoric acid gravimetric method |
| EQV ASTM C577-78 | GB/T 9973-1988 | 炭素材料透气度试验方法 | Test method for the permeability of carbon materials |
| NEQ ASTM C611-82 | GB/T 6717-1986 | 炭素材料电阻率测定方法 | Method for determination of specific resistance of carbon materials |
| NEQ ASTM C614-80 | GB/T 9988-1988 | 搪瓷耐碱性能测试方法 | Test method for alkali resistance of porcelain enamels |
| NEQ ASTM C696-80 | GB/T 11840-1989 | 二氧化铀芯块水分含量测定方法 | Determination of moisture in uranium dioxide pellets |
| EQV ASTM C696-80 | GB/T 11844-1989 | 二氧化铀粉末和芯块中氟的测定 高温水解- 离子选择性电极法 | Uranium dioxide powder and pellets - Determination of fluorine-pyrohydrolysis ion--selective electrode method |
| IDT ASTM C696-80 | GB/T 13369-1992 | 二氧化铀粉末和芯块中氯的测定 高温水解、离子选择性电极法 | Determination of chlorine in uranium dioxide powders and pellets by pyrohydrolysis ion-selective electrode method |
| NEQ ASTM C696-80 | GB/T 13697-1992 | 二氧化铀芯块中碳的测定 | Uranium dioxide pellet - Determination of carbon |
| IDT ASTM C696-80 | GB/T 13698-1992 | 二氧化铀芯块中总氢的测定 | Uranium dioxide pellet - Determination of total hydrogen |
| EQV ASTM C704:1994 | GB/T 18301-2001 | 耐火材料常温耐磨性试验方法 | Test method for abrasion resistance of refractory materials at room temperature |
| NEQ ASTM C705-84 | GB/T 14350-1993 | 锆英石耐火材料化学分析方法 | Chemical analysis methods for zircon refractories |
| NEQ ASTM C729 | GB/T 14901-1994 | 玻璃密度测定 沉浮比较法 | Test method for density of glass--Method of the sink-float comparison |
| NEQ ASTM C 749-73【旧版】 | GB/T 8721-1988 | 炭素材料抗拉强度测定方法 | Method for the determination of tensile strength of carbonaceous materials |
| NEQ ASTM C 753-94 | GB/T 10265-1998 | 核级可烧结二氧化铀粉末技术条件 | Specification for nuclear-grade sinterable uranium dioxide powder |
| EQV ASTM C761 | GB/T 14501.6-1994 | 六氟化铀中铀的测定 | Determination of uranium in uranium hexafluoride |
| IDT ASTM C761-88 | GB/T 13699-1992 | 六氟化铀中钒的分光光度法测定 | Spectrophotometric determination of vanadium in uranium hexafluoride |
| IDT ASTM C761-88 | GB/T 13700-1992 | 六氟化铀中钼的分光光度法测定 | Spectrophotometric determination of molybdenum in uranium hexafluoride |
| IDT ASTM C761-88 | GB/T 13701-1992 | 单标准气体质谱法铀同位素分析 | Isotopic analysis of uranium by single-standard gas mass-spectrometer method |
| EQV ASTM C 761-88 | GB/T 14501.2-1993 | 六氟化铀中磷的测定 分光光度法 | Spectrophotometric determination of phosphorus in uranium hexafluoride |
| NEQ ASTM C 761-88 | GB/T 14501.3-1993 | 六氟化铀中钨、钼、铌、钛、锆的测定 化学光谱法 | Spectrochemical determination of tungsten,molybdenum, niobium,titanium and zirconium in uranium hexafluoride |
| EQV ASTM C 761-88 | GB/T 14501.4-1993 | 六氟化铀中硅的测定 分光光度法 | Spectrophotometric determination of silicon in uranium hexafluoride |
| EQV ASTM C 761-88 | GB/T 14501.5-1993 | 六氟化铀中钛的测定 分光光度法 | Spectrophotometric determination of titanium in uranium hexafluoride |
| NEQ ASTM C 761-91 | GB/T 17508-1998 | 六氟化铀中钐、铕、钆、镝、镉、钽的测定 化学光谱法 | Spectrochemical determination of samarium,europium,gadolinium,dysprosium,cadmium,tantalum in uranium hexafluoride |
| NEQ ASTM C773-82 | GB/T 8489-1987 | 工程陶瓷压缩强度试验方法 | Testing method for compressive(crushing)strength of hingh performance ceramics |
| EQV ASTM C 776-94 | GB/T 10266-1998 | 烧结二氧化铀芯块技术条件 | Specification for sintered uranium dioxide pellets |
| EQV ASTM C787:1996 | GB/T 13375-1999 | 天然六氟化铀 技术条件 | Natural uranium hexafluoride--Specification |
| NEQ ASTM C795-92 | GB/T 17393-1998 | 覆盖奥氏体不锈钢用绝热材料规范 | Standard specification of thermal insulation materials for use over austenitic stainless steel |
| NEQ ASTM C874-77 | GB/T 8931-1988 | 耐火材料抗渣性试验方法 | Test method for the resistance of refractories to slag attack |
| EQV ASTM C880:1996 | GB/T 9966.2-2001 | 天然饰面石材试验方法 第2部分: 干燥、水饱和弯曲强度试验方法 | Test methods for natural facing stones Part 2: Dry and wet test methods for flexural strength |
| NEQ ASTM C 892-1989 | GB/T 16400-1996 | 绝热用硅酸铝棉及其制品 | Aluminium silicate wool and their products for thermal insulation |
| NEQ ASTM C976:1982 | GB/T 16729-1997 | 建筑外门保温性能分级及其检测方法 | Graduation and test method for thermal insulating properties of doors |
| EQV ASTM C996-1990 | GB/T 12576-1997 | 液化石油气蒸气压和相对密度及辛烷值计算法 | Liquified petroleum gases--Calculation of vapour pressure and relative density and octane number |
| NEQ ASTM C1001-83 | GB/T 11219.1-1989 | 土壤中钚的测定 萃取色层法 | Determination of plutonium in soil - Extraction chromatography method |
| NEQ ASTM C1022:1993 | GB/T 11848.3-1999 | 铀矿石浓缩物中可萃有机物的测定 | Determination of extractable organic material in uranium ore concentrate |
| NEQ ASTM C1022:1993 | GB/T 11848.5-1999 | 铀矿石浓缩物中碳酸根的测定 非水滴定法 | Determination of carbonate in uranium ore concentrate by titration in non-aqueous solvent |
| NEQ ASTM C1022:1993 | GB/T 11848.10-1999 | 铀矿石浓缩物中硫的测定 燃烧-碘量法 | Determination of sulfur in uranium ore concentrate by combustion-iodometric titrimetry |
| NEQ ASTM C1022:1993 | GB/T 11848.12-1999 | 铀矿石浓缩物中硼的测定 分光光度法 | Determination of boron in uranium ore concentrate by spectrophotometry |
| EQV ASTM C1022-84 | GB/T 11848.1-1989 | 铀矿石浓缩物中铀的测定 硫酸亚铁还原--重铬酸钾滴定法 | Determination of uranium in uranium ore concentrate by ferrous sulfate reduction--Potassium dichromate titrimatric |
| EQV ASTM C1022-84 | GB/T 11848.2-1989 | 铀矿石浓缩物中硝酸不溶铀的测定 | Determination of nitric acid-insoluble uranium in uranium ore concentrate |
| EQV ASTM C1022-84 | GB/T 11848.4-1989 | 铀矿石浓缩物中砷的测定 二乙基二硫代氨基甲酸盐光度法 | Determination of arsenic in uranium ore concentrate by diethyldithiocarbamate photometric method |
| EQV ASTM C1022-84 | GB/T 11848.6-1989 | 铀矿石浓缩物中氟的测定 离子选择性电极法 | Determination of fluoride in uranium ore concentrate by ion-selective electrode |
| EQV ASTM C1022-84 | GB/T 11848.7-1989 | 铀矿石浓缩物中卤素的测定 伏尔哈德法 | Determination of halidess in uranium ore concentrate - Volhard titration |
| EQV ASTM C1022-84 | GB/T 11848.8-1989 | 铀矿石浓缩物中水分的测定 110℃下失重法 | Determination of moisture in uranium ore concentrare - Loss of weight at 110℃ |
| EQV ASTM C1022-84 | GB/T 11848.9-1989 | 铀矿石浓缩物中硅的测定 重量法测定硅 | Determination of silicon in uranium ore concentrate by gravimetry |
| EQV ASTM C1022-84 | GB/T 11848.11-1989 | 铀矿石浓缩物中钍的测定 钍试剂光度法 | Determination of thorium in uranium ore concentrate by thorin photometric method |
| NEQ ASTM C1201:1991 | GB/T 9966.8-2001 | 天然饰面石材试验方法 第8部分: 用均匀静态压差检测石材挂装系统结构强度试验方法 | Test methods for natural facing stones Part 8: Test method for structural performance of dimension stone cladding systems by uniform static pressure difference |
| EQV ASTM C1354:1996 | GB/T 9966.7-2001 | 天然饰面石材试验方法 第7部分: 检测板材挂件组合单元挂装强度试验方法 | Test methods for natural facing stones Part 7: Test method for strength of individual stone anchorages |
| NEQ ASTM C1041-85 | GB/T 17357-1998 | 设备及管道绝热层表面热损失现场测定 热流计法 | In-situ measurements of heat loss in thermal insulation of equipments and pipes-Heat flow meter apparatus |
| NEQ ASTM C1184:1995 | GB 16776-1997 | 建筑用硅铜结构密封胶 | Structural silicone sealants for building |
| 国際整合 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
| EQV ASTM D 5-95 | GB/T 4509-1998 | 沥青针入度测定法 | Bitumen--Determination of penetration |
| EQV ASTM D36:1995 | GB/T 4507-1999 | 沥青软化点测定法(环球法) | Standard test method for softening point of bitumen (Ring-and-ball apparatus) |
| EQV ASTM D70-82 | GB/T 8928-1988 | 石油沥青比重和密度测定法 | Asphalt materials--Determination of specific gravity and density--Pycnometer method |
| EQV ASTM D86:1995 | GB/T 6536-1997 | 石油产品蒸馏测定法 | Petroleum products--Determination of distillation |
| EQV ASTM D130-83 | GB/T 5096-1985 | 石油产品铜片腐蚀试验法 | Petroleum products--Corrosiveness to copper--Copper strip test |
| NEQ ASTM D140-70 | GB/T 11147-1989 | 石油沥青取样法 | Asphalt--Sampling method |
| EQV ASTM D149-81 | GB/T 1695-1981 | 硫化橡胶工频击穿介电强度和耐电压的测定方法 | Vulcanized rubber--Test method for industrial frequency puncture voltage and dielectric strength |
| EQV ASTM D150-81 | GB/T 1693-1981 | 硫化橡胶工频介电常数和介质损耗角正切值的测定方法 | Vulcanized rubber--Determination for industrial frequency dielectric constant and dielectric loss angular tangent value |
| EQV ASTM D150-81 | GB/T 1694-1981 | 硫化橡胶高频介电常数和介质损耗角正切值的测定方法 | Vulcanized rubber--Test method for HF dielectric constant and dielectric loss angular tangent value |
| IDT ASTM D156-87 | GB/T 3555-1992 | 石油产品赛波特颜色测定法(赛波特比色计法) | Petroleum products - Determination of Saybolt color - Saybolt chromometer method |
| NEQ ASTM D187-82 | GB/T 11130-1989 | 煤油燃烧性测定法 | Kerosine - Determination of burning quality |
| EQV ASTM D 304-90 | GB/T 6027-1998 | 工业正丁醇 | n-Butanol for industrial use |
| NEQ ASTM D312-95 | GB/T 494-1998 | 建筑石油沥青 | Asphalt used in roofing |
| NEQ ASTM D323-82 | GB/T 8017-1987 | 石油产品蒸气压测定法 (雷德法) | Petroleum products--Determination of vapour pressure--Reid method |
| EQV ASTM D 329-95 | GB/T 6026-1998 | 工业丙酮 | Acetone for industrial use |
| NEQ ASTM D341-82 | GB/T 8023-1987 | 液体石油产品粘度温度计算图 | Liquid petroleum products--Viscosity-temperature charts |
| NEQ ASTM D348-80 | GB/T 5132-1985 | 电气绝缘层压管试验方法 | Test methods of laminated tubes used for electrical insulation |
| NEQ ASTM D349-78 | GB/T 5134-1985 | 电气绝缘层压棒试验方法 | Test methods of laminated rods used for electrical insulation |
| NEQ ASTM D445-86 | GB/T 11137-1989 | 深色石油产品运动粘度测定法 (逆流法) 和动力粘度计算法 | Black petroleum products - Determination of kinematic viscosity (reverse-flow method) and calculation of dynamic viscosity |
| EQV ASTM D454:1988 | GB/T 17782-1999 | 硫化橡胶压力空气热老化试验方法 | Rubber,vulcanized--Test method of aging by heat and air pressure |
| NEQ ASTM D 515-82 | GB/T 6913.4-1993 | 锅炉用水和冷却水分析方法 磷酸盐的测定 | Analysis of water used in boiler and cooling system--Determination of phosphate |
| NEQ ASTM D523-80 | GB/T 8807-1988 | 塑料镜面光泽试验方法 | Test method for specular gloss of plastics |
| EQV ASTM D525-80 | GB/T 8018-1987 | 汽油氧化安定性测定法 (诱导期法) | Gasoline--Determination of oxidation stability--Induction period method |
| EQV ASTM D536-84 | GB/T 12689.12-1990 | 锌及锌合金化学分析方法 火焰原子吸收光谱法测定镉量 | Zinc and zinc alloys - Determination of cadmium content - Flame atomic absorption spectrometric method |
| NEQ ASTM D 561-82 | GB/T 7044-1993 | 色素炭黑技术条件 | Colour black--Specification |
| NEQ ASTM D562-81 | GB/T 9269-1988 | 建筑涂料粘度的测定 斯托默粘度计法 | Determination of viscosity of architectural paints and coatings--Stormer viscosimeter method |
| EQV ASTM D565:1988 | GB/T 11079-2000 | 白色油易炭化物试验法 | Standard test method for carbonizable substances in white mineral oil |
| NEQ ASTM D 572-88 | GB/T 13939-1992 | 硫化橡胶热氧老化试验方法 管式仪法 | Rubber, vulcanized--Test method of heat and oxygen--Tube tester ageing method |
| EQV ASTM D612-78 | GB/T 7364-1987 | 石蜡易碳化物试验法 | Paraffin wax - Determination of carbonizable substances |
| NEQ ASTM D613-86 | GB/T 386-1991 | 柴油着火性质测定法 (十六烷值法) | Diesel fuels - Determination of ignition quality by the cetane method |
| NEQ ASTM D 621 | GB/T 14483-1993 | 塑料负载变形试验方法 | Test methods for deformation of plastics under load |
| NEQ ASTM D 639-81(1985) | GB/T 14485-1993 | 工程塑料硬质塑料板材及塑料件耐冲击性能试验方法落球法 | Standard methods of testing for impact resistance of plats and pats made from engineering plastic rigid plastics by a ball(falling ball) |
| EQV ASTM D644:1995 | GB/T 7304-2000 | 石油产品和润滑剂酸值测定法(电位滴定法) | Petroleum products and lubricants--Determination of acid number--Potentiometric titration method |
| NEQ ASTM D659-80 | GB/T 14826-1993 | 色漆涂层粉化程度的测定方法及评定 | Determining and evaluating degree of chalking of paint coats |
| NEQ ASTM D665-83 | GB/T 11143-1989 | 加抑制剂矿物油在水存在下防锈性能试验法 | Inhibited mineral oil - Test method of yust preventing characteristics in the presence of water |
| NEQ ANSI/ASTM D696-79 | GB/T 1036-1989 | 塑料线膨胀系数测定方法 | Determination for coefficient of linear expansion of plastics |
| NEQ ASTM D709M:1993 | GB/T 3356-1999 | 单向纤维增强塑料弯曲性能试验方法 | Test method for flexural properties of unidirectional fiber reinforced plastics |
| EQV ASTM D745-79 | GB/T 7042-1986 | 橡胶压缩或剪切性能的测定 (扬子尼机械示波器) | Rubber properties determination in compression or shear (Yerzley mechanical oscillograph) |
| NEQ ASTM D750-85 | GB/T 15255-1994 | 硫化橡胶人工气候老化(碳弧灯)试验方法 | Rubber, vulcanized--Test method for artifical weathering(carbon-arc lamp) |
| NEQ ASTM D759-76 | GB/T 9979-1988 | 纤维增强塑料高低温力学性能试验准则 | Guide rule of test for mechanical properties of fiber-reinforced plastics at elevated and reduced temperatures |
| NEQ ASTM D770-80 | GB/T 7814-1987 | 异丙醇 | 2-Propanol |
| NEQ ASTM D782-82 | GB/T 4857.8-1992 | 包装 运输包装件 六角滚筒试验方法 | Packaging--Transport packages--Method of revolving hexagonal drum test |
| EQV ASTM D822-80 | GB/T 11190-1989 | 色漆、清漆、喷漆及有关产品的光-水曝露设备(碳弧型) 及实施方法 | Operating light and water-exposure apparatus(carbon-arc type)and testing method for testing paint, varnish lacquer, and related products |
| NEQ ASTM D849-88 | GB/T 11138-1994 | 工业芳烃铜片腐蚀试验法 | Industrial aromatic hydrocarbons--Test method of copper corrosion |
| NEQ ASTM D850:1993 | GB/T 18589-2001 | 焦化产品蒸馏试验的气压补正方法 | Correction of atmospheric pressure for distillation test of products of coal carbonization |
| NEQ ASTM D857 | GB/T 12154-1989 | 锅炉用水和冷却水分析方法 全铝的测定 | Analysis of water used in boiler and cooling system ？Determination of total aluminum |
| NEQ ASTM D 859-1980 | GB/T 16633-1996 | 工业循环冷却水中二氧化硅含量的测定 分光光度法 | Industrial circulating cooling water Determination of silica--Spectrophotometric method |
| NEQ ASTM D892-84 | GB/T 12579-1990 | 润滑油泡沫特性测定法 | Lubricating oils - Determination of foaming characteristics |
| NEQ ASTM D893-85 | GB/T 8926-1988 | 用过的润滑油不溶物测定法 | Used lubricating oils--Determination of insolubles |
| NEQ ASTM D895-79 | GB/T 6981-1986 | 硬包装容器透湿度试验方法 | Test methods for water vapor transmission of rigid containers |
| NEQ ASTM D895-79 | GB/T 6982-1986 | 软包装容器透湿度试验方法 | Test method for water vapor permeability of flexible containers |
| IDT ASTM D896-84 | GB/T 13353-1992 | 胶粘剂耐化学试剂性能的测定方法 金属与金属 | Test method for resistance of adhesive bonds to chemical reagents - Metal to metal |
| EQV ASTM D898-79 | GB/T 2547-1981 | 塑料树脂取样方法 | Plastic resins--Sampling |
| NEQ ASTM D943-85 | GB/T 12581-1990 | 加抑制剂矿物油的氧化特性测定法 | Inhibited mineral oils - Determination of oxidation characteristics |
| NEQ ASTM D 953 | GB/T 14484-1993 | 塑料承载强度试验方法 | Test method for bearing strength of plastics |
| EQV ASTM D955-89 | GB/T 15585-1995 | 热塑性塑料注射成型收缩率的测定 | Determination of shrinkage for injection moulding thermoplastics |
| EQV ASTM D972-81 | GB/T 7325-1987 | 润滑脂和润滑油蒸发损失测定法 | Petroleum products--Lubricating greases and oils--Determination of evaporation loss |
| NEQ ASTM D974 | GB/T 264-1983 | 石油产品酸值测定法 | Petroleum products--Determination of acid number |
| EQV ASTM D974-73 | GB/T 4945-1985 | 石油产品和润滑剂中和值测定法 (颜色指示剂法) | Petroleum products and lubricants--Neutralization number--Colour indicator titration method |
| NEQ ASTM D976-80 | GB/T 11139-1989 | 馏分燃料十六烷指数计算法 | Distillate fuels - Calculation of cetane index |
| EQV ASTM D1003-77 | GB/T 2410-1980 | 透明塑料透光率和雾度试验方法 | Transparent plastics--Transmissivity and haze test |
| EQV ASTM D1025:1996 | GB/T 6014-1999 | 工业用丁二烯中不挥发残留物质的测定 | Butadiene for industrial use--Determination of nonvolatile residues |
| NEQ ASTM D1043-87 | GB/T 15047-1994 | 塑料扭转刚性试验方法 | Test method for stiffness proporties in torsion of plastics |
| NEQ ANSI/ASTM D1060-80 | GB/T 6978-1986 | 原毛冼净率试验方法 烘箱法 | Test method for the determination of scoured yield of greasy wool |
| NEQ ASTM D 1066-82 | GB/T 14416-1993 | 锅炉蒸汽的采样方法 | Methods for sampling boiler steem |
| NEQ ASTM D1083:1991 | GB/T 5398-1999 | 大型运输包装件试验方法 | Test methods for large transport packages |
| EQV ASTM D 1084-88 | GB/T 2794-1995 | 胶粘剂粘度的测定 | Determination methods for viscosity of adhesives |
| EQV ASTM D 1094:1997 | GB/T 1793-2000 | 航空燃料水反应试验法 | Standard test method for water reaction of aviation fuels |
| EQV ASTM D113:1986(1992) | GB/T 4508-1999 | 沥青延度测定法 | Standard test method for ductility of bitumen |
| NEQ ASTM D1133-83 | GB/T 11134-1989 | 烃类溶剂贝壳松脂丁醇值测定法 | Hydrocarbon solvents - Determination of kauri-butanol value |
| NEQ ASTM D1152-84 | GB 338-1992 | 工业甲醇 | Methanol for industrial use |
| NEQ ASTM D1159-84 | GB/T 11135-1989 | 石油馏分和工业脂肪族烯烃溴值测定法 (电位滴定法) | Petroluem distillates and commercial aliphatic olefins - Determination of bromine number - Electrometric titration |
| EQV ASTM D1160-1995 | GB/T 9168-1997 | 石油产品减压蒸馏测定法 | Petroleum products-Determination of distillation at reduced pressure |
| NEQ ASTM D1173-80 | GB/T 13173.6-1991 | 洗涤剂发泡力的测定 (Ross-Miles法) | Determination of foaming power for synthetic detergents - Ross-Miles method |
| EQV ASTM D 1209-93 | GB/T 17530.3-1998 | 工业丙烯酸及酯色度的测定 | Acrylic acid and acrylate esters for industrial use-Determination of color |
| NEQ ASTM D 1293-84 | GB/T 15893.2-1995 | 工业循环冷却水中pH值的测定 电位法 | Industrial circulating cooling water--Determination of pH--Electrometric method |
| NEQ ASTM D1294-74 | GB/T 4710-1984 | 羊毛束纤维断裂强度试验方法 | Method of test for breaking tenacity of wool fibre bundles |
| NEQ ASTM D1319-84 | GB/T 11132-1989 | 液体石油产品烃类测定法 荧光指示剂吸附法 | Liquid petroleum products - Determination of hydrocarbon types - Fluorescent indicator absorption method |
| IDT ASTM D1321-95 | GB/T 4985-1998 | 石油蜡针入度测定法 | Determination of needle penetration of petroleum waxes |
| EQV ASTM D1337-84 | GB/T 7751-1987 | 胶粘剂贮存期的测定方法 | Test method for storage life of adhesives |
| NEQ ASTM D 1339-78 | GB/T 14426-1993 | 锅炉用水和冷却水分析方法 亚硫酸盐的测定 | Analysis of water used in boiler and cooling system--Determination of sulfite |
| EQV ASTM D1401-77 | GB/T 7305-1987 | 石油和合成液抗乳化性能测定法 | Petroleum oils and synthetic fluids--Determination of demulsibility characteristics |
| NEQ ASTM D1414-90 | GB/T 5720-1993 | O形橡胶密封圈试验方法 | Test methods for rubber O rings |
| NEQ ASTM D1425:1989 | GB/T 3292-1997 | 纺织品 纱条条干不匀试验方法 电容法 | Textiles--Testing method for unevenness of textile strands--Using capacitance testing equipment |
| EQV ASTM D1439-83 | GB/T 12029.1-1989 | 洗涤剂用羧甲基纤维素钠水分及挥发物的测定 | Determination of moisture and volatile content of sodium carboxymethylcellulose for detergents |
| NEQ ASTM D1439-83 | GB/T 12029.2-1989 | 洗涤剂用羧甲基纤维素钠粘度的测定 | Determination of viscosity of sodium carboxymethylcellulose for detergents |
| IDT ASTM D1439-83 | GB/T 12029.4-1989 | 洗涤剂用羧甲基纤维素钠醚化度的测定 | Determination of degree of etherification of sodium carboxymethylcellulose for detergents |
| EQV ASTM D1439-83 | GB/T 12029.5-1989 | 洗涤剂用羧甲基纤维素钠纯度的测定 | Determination of purity of sodium carboxymethylcellulose for detergents |
| IDT ASTM D 1440 | GB/T 13779-1992 | 棉纤维长度试验方法 梳片法 | Test method for length of cotton fibres--Comb sorter method |
| NEQ ASTM D1490-67 | GB/T 5546-1985 | 树脂整理剂中不挥发组分的测定方法 | Resin finishing agent--Determination of the nonvolatile content |
| EQV ASTM D1500-82 | GB/T 6540-1986 | 石油产品颜色测定法 | Petroleum products--Determination of colour |
| EQV ASTM D 1510-96 | GB/T 3780.1-1998 | 橡胶用炭黑吸碘值试验方法 | Carbon black used in rubber products--Test method for iodine adsorption number |
| EQV ASTM D 1512-1993 | GB/T 3780.7-1996 | 炭黑pH值的测定 | Carbon black--Determination of pH value |
| NEQ ASTM D 1512-90 | GB/T 7045-1993 | 色素炭黑pH值的测定 | Colour black--Determination of pH value |
| EQV ASTM D1514-88 | GB/T 3780.21-1991 | 橡胶用炭黑筛余物测定 水冲洗法 | Carbon black used in rubber products--Determination of sieve residue--Water washing method |
| NEQ ASTM D1535-95a | GB/T 6749-1997 | 漆膜颜色表示方法 | Method of specifying colour for paint films |
| NEQ ASTM D1544-80 | GB/T 12007.1-1989 | 环氧树脂颜色测定方法 加德纳色度法 | Epoxide resins - Determination of color - Gardner color scale |
| NEQ ASTM D1576-78 | GB/T 6500-1986 | 羊毛回潮率试验方法 烘箱法 | Test method for moisture regain of wool--Drying oven method |
| NEQ ASTM D1593-89 | GB/T 3830-1994 | 软聚氯乙烯压延薄膜和片材 | Calendered film(sheet)from flexible PVC |
| NEQ ASTM D1599-81 | GB/T 5351-1985 | 纤维增强热固性塑料管短时水压失效压力试验方法 | Test method for short-time hydraulic failure pressure of fiber-reinforced thermosetting plastic pipe |
| EQV ASTM D 1613-91 | GB/T 17530.4-1998 | 工业丙烯酸酯酸度的测定 | Acrylate esters for industrial use-Determination of acidity |
| EQV ASTM D1638-74 | GB/T 12009.2-1989 | 异氰酸酯中水解氯含量测定方法 | Isocyanates - Determination of hydrolyzable chlorine content |
| EQV ASTM D1638-74 | GB/T 12009.3-1989 | 多亚甲基多苯基异氰酸酯粘度测定方法 | Polymethylene polyphenyl isocyanate - Determination of viscosity |
| IDT ASTM D1638-74 | GB/T 12009.4-1989 | 多亚甲基多苯基异氰酸酯中异氰酸根含量测定方法 | Polymethylene polyphenyl isocyanato - Determination of isocyanate content |
| EQV ASTM D1638-74 | GB/T 12009.5-1992 | 异氰酸酯中酸度的测定 | Isocyanates--Determination of acidity |
| EQV ASTM D1638-74 | GB/T 12009.1-1989 | 异氰酸酯中总氯含量测定方法 | Isocyanates - Determination of total chlorine content |
| NEQ ASTM D1655-92 | GB 6537-1994 | 3号喷气燃料 | No3 Jet fuel |
| EQV ASTM D1693:1997 | GB/T 1842-1999 | 聚乙烯环境应力开裂试验方法 | Test method for environmental stress-cracking of polyethylene plastics |
| NEQ ASTM D1740-85 | GB/T 11128-1989 | 喷气燃料辉光值测定法 | Aviation turbine fuels - Determination of luminometer numbers |
| NEQ ASTM D1743-81 | GB/T 5018-1985 | 润滑脂防腐蚀性试验法 | Standard test method for corrosion preventive properties of lubricating greases |
| NEQ ASTM D1744-83 | GB/T 11133-1989 | 液体石油产品水含量测定法 (卡尔.费休法) | Liquid petroleum products - Determination of water - Karl fischer reagent method |
| EQV ASTM D1754:1997 | GB/T 5304-2001 | 石油沥青薄膜烘箱试验法 | Asphalt thin-film oven test method |
| EQV ASTM D1755:1992 | GB/T 2915-1999 | 聚氯乙烯树脂水萃取物电导率的测定 | Determination of conductivity of water extract of poly(vinyl chloride) resins |
| NEQ ASTM D1763-81 | GB/T 13657-1992 | 双酚-A型环氧树脂 | Bisphenol - A epoxy resins |
| EQV ASTM D 1765-1994 | GB/T 3777-1996 | 橡胶用炭黑标准分类命名系统 | Standard classification system for carbon blacks used in rubber products |
| NEQ ASTM D1765-86 | GB/T 9578-1988 | 标准参比炭黑 | Standard reference black |
| NEQ ASTM D1765-91 | GB 3778-1994 | 橡胶用炭黑 | Carbon black for use in rubber industry |
| NEQ ASTM D1765-91 | GB/T 14853.7-1994 | 橡胶用造粒炭黑技术条件 | Rubber compounding ingredient--Carbon black, pelletized--Specification |
| EQV ANSI/ASTM D1769 | GB/T 17686-1999 | 棉纤维 线密度试验方法 排列法 | Cotton fibre--Determination of linear density--Array method |
| EQV ASTM D1824-83 | GB/T 12004.4-1989 | 聚氯乙烯增塑糊 Brookfield 粘度测定方法 | Polyvinyl chloride plastisols - Determination for Brookfield viscosity |
| NEQ ASTM D1835:1991 | GB 11174-1997 | 液化石油气 | Liquefied petroleum gases |
| NEQ ASTM D1835-91 | GB 9052.1-1998 | 油气田液化石油气 | Liquefied petroleum gas of oil and gas field |
| EQV ASTM D1836-91(1994) | GB 17602-1998 | 工业己烷 | Commercial hexanes |
| NEQ ASTM D1837-86 | GB/T 13287-1991 | 液化石油气挥发性测定方法 | Liquefied petroleum gases - Determination of volatility |
| NEQ ASTM D1849-80 | GB/T 6753.3-1986 | 涂料贮存稳定性试验方法 | Methods of test for package stability of paints |
| EQV ASTM D 1871:1988 | GB/T 3513-2001 | 硫化橡胶与单根钢丝粘合力的测定 抽出法 | Rubber,vulcanized--Determination of adhesion to single-Pull out test |
| NEQ ASTM D1875-80 | GB/T 13354-1992 | 液态胶粘剂密度的测定方法 重量杯法 | Test method for density of adhesives in fluid form - Method of weight cup |
| NEQ ASTM D1888-84 | GB/T 15893.4-1995 | 工业循环冷却水中溶解性固体的测定 重量法 | Industrial circulating cooling water--Detemination of dissolved matter--Gravimetric method |
| NEQ ASTM D 1893-1985 | GB/T 16276-1996 | 塑料薄膜粘连性试验方法 | Test method for blocking of plastic film |
| EQV ASTM D1925-77 | GB/T 2409-1980 | 塑料黄色指数试验方法 | Plastics--Yellow index test method |
| EQV ASTM D1929-77 | GB/T 9343-1988 | 塑料燃烧性能试验方法 闪点和自燃点的测定 | Test method for flammability of plastics--Flash-ignition temperature and self-ignition temperature test |
| NEQ ASTM D1937-89 | GB/T 14853.4-1993 | 橡胶用造粒炭黑堆积强度的测定 | Rubber compounding ingredients--Carbon black, pelletized--Determination of mass strength |
| NEQ ASTM D1945-81 | GB/T 13610-1992 | 天然气的组成分析 气相色谱法 | Analysis of natural gas by gas chromatography |
| EQV ASTM D2035-80(90年) | GB/T 16881-1997 | 水的混凝、絮凝杯罐试验方法 | Coagulation--Flocculation jar test of water |
| NEQ ASTM D2042-85 | GB/T 11148-1989 | 石油沥青溶解度测定法 | Asphalt - Determination of solubility |
| NEQ ASTM D2119-87 | GB/T 12688.5-1990 | 工业用苯乙烯中总醛含量的测定 滴定法 | Styrene for industrial use - Determination of content of total aldehydes - Titrimetric method |
| NEQ ASTM D2121-84 | GB/T 12688.3-1990 | 工业用苯乙烯中聚合物含量的测定 光度法 | Styrene for industrial use - Determination of content of polymer - Photometric method |
| NEQ ASTM D2122-81 | GB/T 8805-1988 | 硬质塑料管材弯曲度测量方法 | Determination of deflection for rigid plastic pipes |
| NEQ ASTM D2187-82 | GB/T 11992-1989 | 氯型强碱性阴离子交换树脂交换容量测定方法 | Strong basic anion exchange resins in chloride form - Determination of exchange capacity |
| NEQ ASTM-D2221-84 | GB/T 14745-1993 | 包装 缓冲材料 蠕变特性试验方法 | Packaging--Cushioning materials--Test method for creep properties |
| IDT ASTM D2222-66(88) | GB/T 13453.2-1992 | 聚氯乙烯树脂甲醇或乙醇萃取物含量的测定方法 | Determination for the content of methanol or ethanol extract of polyvinyl chloride resins |
| NEQ ASTM D2243-82 | GB/T 9268-1988 | 乳胶漆耐冻融性的测定 | Determination of freeze-thaw resistance of latex and emulsion paints |
| NEQ ASTM D 2253-81 | GB/T 13784-1992 | 棉花颜色试验方法 测色仪法 | Test method for colour of Cotton colorimeter method |
| NEQ ASTM D2268-84 | GB/T 8120-1987 | 高纯正庚烷和异辛烷纯度测定法 (毛细管色谱法) | High-purity n-heptane and isooctance--Determination of purrity--Capillary gas chromatography |
| EQV ASTM D2269-83 | GB/T 11081-1989 | 白色油紫外吸光度测定法 | White oils - Determination of ultraviolet absorption |
| EQV ASTM D 2270-93 | GB/T 1995-1998 | 石油产品粘度指数计算法 | Petroleum products--Calculation of viscosity index |
| NEQ ASTM D2290-76 | GB/T 1458-1988 | 纤维缠绕增强塑料环形试样拉伸试验方法 | Test method for tensile strength of ring of filament- winding reinforced plastics |
| NEQ ASTM D2300-81 | GB/T 11142-1989 | 绝缘油在电场和电离作用下析气性测定法 | Insulating oils - Determination of gassing under electrical stress and ionization |
| NEQ ASTM D2340-87 | GB/T 12688.4-1990 | 工业用苯乙烯中过氧化物含量的测定 滴定法 | Styrene for industrial use - Determination of content of peroxides - Titrimetric method |
| NEQ ASTM D2344-76 | GB/T 1461-1988 | 纤维缠绕增强塑料环形试样剪切试验方法 | Test method for interlaminar shear strength of ring of filament-winding reinforced plastics |
| EQV ASTM D 2378-84 | GB/T 9009-1998 | 工业甲醛溶液 | Formaldehvde solution for industrial use |
| NEQ ASTM D2385-81 | GB/T 11060.1-1998 | 天然气中硫化氢含量的测定 碘量法 | Natural gas--Determination of hydrogen sulfide content--Lodometric titration method |
| EQV ASTM D2412-77 | GB/T 5352-1985 | 纤维增强热固性塑料管平行板外载性能试验方法 | Test method for external loading properties of fiber -reinforced thermosetting plastic pipe by parallel- plate loading |
| NEQ ASTM D2412-77 | GB/T 9647-1988 | 塑料管材耐外负荷试验方法 | Test method for external loading resistance for plastic pipe |
| EQV ASTM D2426:1993 | GB/T 6015-1999 | 工业用丁二烯中微量二聚物的测定 气相色谱法 | Butadiene for industrial use--Determination of trace dimer--Gas chromatographic method |
| NEQ ASTM D 2435-83 | GB/T 4935-1996 | 单杠杆固结仪 | Single lever arm oedometer |
| NEQ ASTM D2460-82 | GB/T 11214-1989 | 水中镭-226 的分析测定 | Analytical determination of radium-226 in water |
| NEQ ASTM D2460-82 | GB/T 11218-1989 | 水中镭的α放射性核素的测定 | The determination for alpha-radionuelide of radium in water |
| NEQ ASTM D2495-80 | GB/T 6102.1-1985 | 原棉回潮率试验方法 烘箱法 | Test method for moisture regain in raw cotton by oven drying |
| NEQ ASTM D-2496 | GB/T 6103-1985 | 原棉疵点试验方法 | Test method for fault in raw cotton |
| EQV ASTM D2502-92 | GB/T 17282-1998 | 根据运动粘度确定石油分子量(相对分子质量)的方法 | Method for estimation of molecular weight (Relative molecular mass) of petroleum oils from viscosity measurements |
| NEQ ASTM D 2505-88 | GB/T 3395-1993 | 工业用乙烯中微量乙炔的测定 气相色谱法 | Ethylene for industrial use--Determination of trace acetylene--Gas chromatographic method |
| NEQ ASTM D2520-81 | GB/T 9533-1988 | 微波固体电介质材料介电特性测试方法 同轴终端短路法 | Test method for the determination of the dielectric properties of solid dielectric materials at microwave frequencies--The method of coaxial terminal short circuit |
| NEQ ASTM D2533-82 | GB/T 6534-1986 | 汽油气-液比测定法 | Gasoline--Determination of vapor-liquid ratio |
| NEQ ASTM D2550-85 | GB/T 11129-1989 | 喷气燃料水分离指数测定法 | Jet fuels - Determination of water separation characteristics |
| NEQ ASTM D2577-72 | GB/T 11221-1989 | 生物样品灰中铯-137的放射化学分析方法 | Radiochemical analysis of caesium-137 in ash of biological samples |
| NEQ ASTM D2590-77 | GB 8072-1987 | 温石棉取样、制样方法 | Method of sampling and preparation for chrysotile asbestos |
| NEQ ASTM D2590-77 | GB/T 8073-1987 | 温石棉松解度湿式测定方法 | Method of wet determination for softness of chrysotile asbestos |
| NEQ ASTM D2599-81 | GB/T 8925-1988 | 汽油铅含量测定法(X射线光谱法) | Gasoline--Determination of lead--X-ray spectrometry |
| NEQ ASTM D2622-82 | GB/T 11140-1989 | 石油产品硫含量测定法 (X 射线光谱法) | Petroleum products - Determination of sulfur - X-ray spectrometry |
| EQV ASTM D2624:1995 | GB/T 6539-1997 | 航空燃料与馏分燃料电导率测定法 | Standard test methods for electrical conductivity of aviation and distillate fuels |
| NEQ ASTM D2624-1994 | GB/T 16906-1997 | 石油罐导静电涂料电阻率测定法 | Standard test methods for electrical resistivity of antistatic coating in petroleum tanks |
| NEQ ASTM D2654-1989 | GB/T 9995-1997 | 纺织材料含水率和回潮率的测定 烘箱干燥法 | Determination of moisture content and moisture regain of textile--Oven-drying method |
| NEQ ASTM D2663-82 | GB/T 6030-1985 | 硫化橡胶中炭黑分散度的测定 显微照相法 | Vulcanized rubber--Determination of carbon black dispersion--Micrographic method |
| EQV ASTM D 2699-94 | GB/T 5487-1995 | 汽油辛烷值测定法(研究法) | Test method for knock characteristics of motor fuels by the Research method |
| EQV ASTM D 2700-94 | GB/T 503-1995 | 汽油辛烷值测定法(马达法) | Test method for knock characteristics of motor and aviation fuels by the motor method |
| EQV ASTM D 2707-85(89) | GB/T 1701-2001 | 硬质橡胶拉伸强度和拉断伸长率的测定 | Ebonite-Determination of tensile strength and elongation at break |
| NEQ ASTM D2710-84 | GB/T 11136-1989 | 石油烃类溴指数测定法 (电位滴定法) | Petroleum hydrocarbons - Determination of bromine index - Electrometric titration |
| IDT ASTM D2711-79 | GB/T 8022-1987 | 润滑油抗乳化性能测定法 | Lubricating oils--Determination of demulsibility characteristics |
| NEQ ASTM D2725-70 | GB/T 11060.2-1998 | 天然气中硫化氢含量的测定 亚甲蓝法 | Natural gas--Determination of hydrogen sulfide content--Methylene blue method |
| NEQ ASTM D2782-82 | GB/T 11144-1989 | 润滑油极压性能测定法 (梯姆肯试验机法) | Lubricating fluids - Measurement of extreme pressure properties - Timken method |
| EQV ASTM D 2783-88(1993) | GB/T 12583-1998 | 润滑剂极压性能测定法(四球法) | Standard test method for measurement of extreme--Pressure properties of lubricating fluids(Four--Ball method) |
| EQV ASTM D2827-95 | GB 3915-1998 | 工业用苯乙烯 | Styrene for industrial use |
| NEQ ASTM D2843:1993
DIN 4102:1981 |
GB/T 8627-1999 | 建筑材料燃烧或分解的烟密度试验方法 | Test method for density of smoke from the burning or decomposition of building materials |
| NEQ ASTM D2849-80 | GB/T 12008.3-1989 | 聚醚多元醇中羟值测定方法 | Polyether polyols - Determination of hydroxyl number |
| NEQ ASTM D2849-80 | GB/T 12008.4-1989 | 聚醚多元醇中钠和钾测定方法 | Polyether polyols - Determination of sodium and potassium |
| NEQ ASTM D2849-80 | GB/T 12008.5-1989 | 聚醚多元醇中酸值测定方法 | Polyether polyols - Determination of acid number |
| NEQ ASTM D2849-80 | GB/T 12008.6-1989 | 聚醚多元醇中水分含量测定方法 | Polyether polyols - Determination of water content |
| NEQ ASTM D2854-70 | GB/T 6286-1986 | 分子筛堆积密度测定方法 | Determination of bulk density for molecular sieve |
| EQV ASTM D2854-89 | GB/T 7702.4-1997 | 煤质颗粒活性炭试验方法 装填密度的测定 | Standard test method for granular activated carbon from coal-- Determination of apparent density |
| EQV ASTM D2862-92 | GB/T 7702.2-1997 | 煤质颗粒活性炭试验方法 粒度的测定 | Standard test method for granular activated carbon from coal-- Determination of particle size |
| EQV ASTM D2867-91 | GB/T 7702.1-1997 | 煤质颗粒活性炭试验方法 水分的测定 | Standard test method for granular activated carbon from coal-- Determination of moisture content |
| EQV ASTM D 2892-90 | GB/T 17280-1998 | 原油蒸馏标准试验方法 | Standard test method for distillation of crude petroleum |
| NEQ ASTM D2907-83 | GB/T 11223.1-1989 | 生物样品灰中铀的测定 固体荧光法 | Analytical determination of uranium in ash of biological samples--Solid fluorimetry |
| NEQ ASTM D 297:1993 | GB/T 7766-2000 | 橡胶中炭黑含量的测定 硝酸消化法 | Rubber--Determination of carbon black content--Nitric acid digestion method |
| NEQ ASTM D 297:1993 | GB/T 18174-2000 | 橡胶中二氧化硅含量的测定 | Rubber--Determination of silicon dioxide content |
| NEQ ASTM D2983-80 | GB/T 11145-1989 | 车用流体润滑剂低温粘度测定法 (勃罗克费尔特粘度计法) | Automotive fluid lubricants - Determination of low-temperature viscosity - Brookfield viscometer method |
| EQV ASTM D3014-76 | GB/T 8333-1987 | 硬泡沫塑料燃烧性能试验方法 垂直燃烧法 | Test method for flammability of rigid cellular plastics--Virtical burning method |
| NEQ ASTM D3029-84 | GB/T 11548-1989 | 硬质塑料板材耐冲击性能试验方法 (落锤法) | Standard test method for impact resistance of rigid plastic sheeting by means of a tup (falling weight) |
| NEQ ASTM D3053-92 | GB/T 7767-1994 | 炭黑术语 | Standard terminology relating to carbonblack |
| NEQ ASTM D 3064 | GB/T 14448-1993 | 气雾剂产品的分类及术语 | Classification and terms of aerosol products |
| NEQ ASTM D 3074 | GB/T 14449-1993 | 气雾剂产品测试方法 | Test method for aerosol products |
| NEQ ASTM D3078 | GB/T 15171-1994 | 软包装件密封性能试验方法 | Test method for leaks in sealed flexible packages |
| NEQ ASTM D 3080-1983 | GB/T 4934-1996 | 应变控制式直剪仪 | Strain-controlled direct shear apparatus |
| EQV ASTM D 3125-93 | GB/T 17530.5-1998 | 工业丙烯酸及酯中阻聚剂的测定 | Acrylic acid and Acrylate esters for industrial use-Determination of monomethyl ether of Hydroquinone |
| NEQ ASTM D 3164-73(84) | GB/T 13936-1992 | 硫化橡胶与金属粘接拉伸剪切强度测定方法 | Rubber, vulcanized--Method for determination of strength properties of adhesive to metal in shear by tension loading |
| NEQ ASTM D3187-90 | GB/T 15339-1994 | 炭黑在丁腈橡胶中配方及鉴定方法 | Carbon black in NBR (acrylonitrile-butadiene rubber)--Recipe and evaluation method |
| EQV ASTM D 3191-96 | GB/T 9579-1998 | 炭黑在丁苯橡胶中配方及鉴定方法 | Carbon black in SBR(Styrene-butadiene rubber)-Recipe and evaluation method |
| EQV ASTM D 3192-96 | GB/T 3780.18-1998 | 炭黑在天然橡胶中配方及鉴定方法 | Carbon black in natural rubber--Recipe and evaluation method |
| NEQ ASTM D3227-83 | GB/T 1792-1988 | 馏分燃料中硫醇硫测定法(电位滴定法) | Distillate fuels--Determination of mercaptan sulphur--Potentiometric titration method |
| NEQ ASTM D3228-83 | GB/T 9170-1988 | 润滑油及燃料油中总氮含量测定法(改进的克氏法) | Lubricating oils and fuel oils - Determination of total nitrogen - Modified kjeldahl method |
| NEQ ASTM D3237-79 | GB/T 8020-1987 | 汽油铅含量测定法 (原子吸收光谱法) | Gasoline--Determination of lead content--Atomic absorption spectrometry |
| EQV ASTM D3241-85 | GB/T 9169-1988 | 喷气燃料热氧化安定性测定法 (JFTOT法) | Jet fuels？Determination of thermal oxidation stability？JFTOT method |
| EQV ASTM D3244:1990a | GB/T 17039-1997 | 利用试验数据确定产品质量与规格相符性的实用方法 | Standard practice for utilization of test data to determine conformance with specifications |
| NEQ ASTM D3246-1981 | GB/T 11061-1997 | 天然气中总硫的测定 氧化微库仑法 | Natural gas--Determination of sulfur--Oxidative microculometry method |
| NEQ ASTM D 3265-88 | GB/T 7050-1993 | 色素炭黑着色力的测定 | Colour black--Determination of tinting strength |
| EQV ASTM D 3265-96 | GB/T 3780.6-1998 | 橡胶用炭黑着色强度试验方法 | Carbon black used in rubber products--Tinting strength test method |
| EQV ASTM D3324-84 | GB/T 10723-1989 | 用ASTM标准参比炭黑改善炭黑试验再现性的标准方法 | Standard method for carbon black - Improving test reproducibility using ASTM reference blacks |
| NEQ ASTM D3332-88 | GB/T 15099-1994 | 使用冲击试验机测定产品脆值的试验方法 | Test methods for mechanical shock fragility of products, using shock machines |
| NEQ ASTM D3351-74 | GB/T 6595-1986 | 聚丙烯树脂"鱼眼"测试方法 | Test method for fish eye count of polypropylene resin |
| EQV ASTM D 3362-93 | GB/T 17530.2-1998 | 工业丙烯酸酯纯度的测定 气相色谱法 | Determination of purity of industrial use acrylate esters by gas chromatography |
| NEQ ASTM D3420-84 | GB/T 8809-1988 | 塑料薄膜抗摆锤冲击试验方法 | Test method for pendulum impact resistance of plastic films |
| EQV ASTM D 3432:1989 | GB/T 18446-2001 | 气相色谱法测定氨基甲酸酯预聚物和涂料溶液中未反应的甲苯二异氰酸酯(TDI)单体 | Standard test method for unreacted toluene diisocyanates in urethane prepolymers and coatings solution by gas chromatography |
| EQV ASTM D3466-76 | GB/T 7702.9-1997 | 煤质颗粒活性炭试验方法 着火点的测定 | Standard test method for granutar activated carbon from coal--Determination of ignition temperature |
| NEQ ASTM D3467-1994 | GB/T 7702.13-1997 | 煤质颗粒活性炭试验方法 四氯化碳吸附率的测定 | Standard test method for granular aactivated carbon from coal--Determination of carbon tetrachloride adsorption |
| NEQ ASTM D3479:1976 | GB/T 16779-1997 | 纤维增强塑料层合板拉-拉疲劳性能试验方法 | Test method for tension-tension fatigue of fiber reinforced plastic laminates |
| EQV ASTM D 3547-91 | GB/T 17529.4-1998 | 工业丙烯酸正丁酯 | n-buthyl Acrylate for industrial use |
| EQV ASTM D 3548-93 | GB/T 17529.3-1998 | 工业丙烯酸乙酯 | Ethyl acrylate for industrial use |
| NEQ ASTM D3574-1981 | GB/T 6670-1997 | 软质聚氨酯泡沫塑料回弹性能的测定 | Cellular plastics--Flexible polyurethane foam-Determination of resilience |
| EQV ASTM D3574-81 | GB/T 10808-1989 | 软质泡沫塑料撕裂性能试验方法 | Cellular plastics - Tear resistance test for flexible materials |
| NEQ ASTM D3576-77 | GB/T 12811-1991 | 硬质泡沫塑料平均泡孔尺寸试验方法 | Test method for average cell size of rigid cellular plastics |
| EQV ASTM D3611:1989 | GB/T 17875-1999 | 压敏胶粘带加速老化试验方法 | Practice for accelerated aging of pressure-sensitive tapes |
| EQV ASTM D 3620:1990 | GB/T 1628.1-2000 | 工业冰乙酸 | Glacial acetic acid for industrial use |
| NEQ ASTM D3652M:1993 | GB/T 7125-1999 | 压敏胶粘带和胶粘剂带厚度试验方法 | Test method for thickness of pressure-sensitive and gummed tapes |
| NEQ ASTM D 3663-1992 | GB/T 7702.21-1997 | 煤质颗粒活性炭试验方法 比表面积的测定 | Standard test method for granular activated carbon from coal--Determination of specific surface area |
| NEQ ASTM D 3663-92 | GB/T 5816-1995 | 催化剂和吸附剂表面积测定法 | Catalysts and adsorbents--Determination of surface area |
| NEQ ASTM D3699-83 | GB 253-1989 | 煤油 | Kerosine |
| EQV ASTM D3707-1989 | GB/T 16497-1996 | 表面活性剂 油包水乳液稳定性试验方法 第1部分:油包水乳液贮藏稳定性的测定 烘箱法 | Surface active agents--Test method for stability of water-in-oil emulsion--Part 1: Determination of storage stability of water-in-oil emulsion--Oven method |
| EQV ASTM D 3709-1989 | GB/T 16498-1996 | 表面活性剂 油包水乳液稳定性试验方法 第2部分: 油包水乳液贮藏稳定性的测定 低温至室温循环法 | Surface active agents--Test method for stability of water-in-oil emulsion--Part 2: Determination of storage stability of water-in-oil emulsion--Low to ambient temperature cycling method |
| EQV ASTM D3765-85 | GB/T 3780.5-1991 | 橡胶用炭黑比表面积测定 CTAB法 | Carbon black used in rubber products--Determination of specific surface area - CTAB test method |
| NEQ ASTM D3799-84 | GB/T 12688.2-1990 | 工业用苯乙烯纯度的测定 结晶点法 | Styrene for industrial use - Determination of purity - Crystallizing point method |
| EQV ASTM D3802-79(1994) | GB/T 7702.3-1997 | 煤质颗粒活性炭试验方法 强度的测定 | Standard test method for granutar activated carbon from coal-- Determination of hardness |
| NEQ ASTM D3816-88 | GB/T 15330-1994 | 压敏胶粘带水渗透率试验方法 | Test method for water penetration rate of pressure-sensitive tapes |
| EQV ASTM D3829-79 | GB/T 9171-1988 | 发动机油边界泵送温度测定法 | Engine oil - Determination of borderline pumping temperature |
| NEQ ASTM D3833-88 | GB/T 15331-1994 | 压敏胶粘带水蒸汽透过率试验方法 | Test method for water vapor transmission of pressure-sensitive tapes |
| EQV ASTM D3836-1980 | GB/T 7702.16-1997 | 煤质颗粒活性炭试验方法 pH值的测定 | Standard test method for granular activated carbon from coal--Determination of pH value |
| EQV ASTM D3914-86 | GB/T 13096.3-1991 | 拉挤玻璃纤维增强塑料杆面内剪切强度试验方法 | Test method for in plane shear strength of pultruded glass fiber reinforced plastic rods |
| NEQ ASTM D3916-84 | GB/T 13096.1-1991 | 拉挤玻璃纤维增强塑料杆拉伸性能试验方法 | Test method for tensile properties of pultruded glass fiber reinforced plastic rods |
| NEQ ASTM D3920-80 | GB/T 11222.1-1989 | 生物样品灰中锶-90的放射化学分析方法 二-(2-乙基己基)磷酸酯萃取色层法 | Radiochemical analysis of strontium-90 in ash of biological sampies--Extraction chromatography by di-(2-ethylhexyl) phosphate |
| NEQ ASTM D3921-80 | GB/T 12152-1989 | 锅炉用水和冷却水分析方法 油的测定 红外光度法 | Analysis of water used in boiler and cooling system？Determination of mineral oil？Infrared photometric method |
| NEQ ASTM D3961-85 | GB/T 12688.6-1990 | 工业用苯乙烯中微量硫的测定 氧化微库仑法 | Styrene for industrial use - Determination of trace sulfur - Oxidative micro-coulometric method |
| NEQ ASTM D3964-80 | GB/T 15610-1995 | 同色异谱的目视评价方法 | Method for visual evaluation of metamerism |
| EQV ASTM D4003:1992 | GB/T 4857.15-1999 | 包装 运输包装件 可控水平冲击试验方法 | Packaging--Transport packages--Controlled horizontal impact test method |
| EQV ASTM D4006-81 | GB/T 8929-1988 | 原油水含量测定法(蒸馏法) | Grude oil--Determination of water--Distillation method |
| EQV ASTM D4007-81 | GB/T 6533-1986 | 原油中水和沉淀物测定法 (离心法) | Crude petroleum--Determination of water and sadiment--Centrifuge method |
| EQV ASTM D4048-81 | GB/T 7326-1987 | 润滑脂铜片腐蚀试验法 | Lubricating grease--Corrosiveness to copper--Copper strip test |
| NEQ ASTM D4072-1981(1986) | GB/T 2292-1997 | 焦化产品甲苯不溶物含量的测定 | Coking products--Determination of toluene insoluble content |
| EQV ASTM D 4084:1994 | GB/T 18605.1-2001 | 天然气中硫化氢含量的测定 第1部分: 醋酸铅反应速率双光路检测法 | Natural gas-Determination of hydrogen sulfide content Part 1: Lead acetate reaction rate dual photo path method |
| NEQ ASTM D4084-1994 | GB/T 18605.2-2001 | 天然气中硫化氢含量的测定 第2部分: 醋酸铅反应速率单光路检测法 | Natural gas-Determination of hydrogen sulfide content Part 1: Lead acetate reaction rate single photo path method |
| EQV ASTM D4100-82 | GB/T 9638-1988 | 塑料燃烧烟尘的测定 称量法 | Gravimetric determination of smoke particulates from combustion of plastic materials |
| IDT ASTM D4122-83 | GB/T 9580-1988 | 标准参比炭黑的鉴定方法 | Standard practice for carbon black--Evaluation of a standard reference black |
| NEQ ASTM D4122-88 | GB/T 12827-1991 | 标准参比乙炔炭黑及鉴定方法 | Standard reference acetylene black and standard practice for evaluation |
| NEQ ASTM D4191-82 | GB/T 14641-1993 | 工业循环冷却水中钠含量的测定 原子吸收光谱法 | Industrial circulating cooling water--Determination of sodium--Atomic absorption spectrometric method |
| NEQ ASTM D4192-82 | GB/T 14640-1993 | 工业循环冷却水中钾含量的测定 原子吸收光谱法 | Industrial circulating cooling water--Determination of potassium--Atomic absorption spectrometric method |
| NEQ ASTM D4234:1983 | GB/T 8878-1997 | 棉针织内衣 | Cotton knitted underwear |
| NEQ ASTM D4294:1990 | GB/T 17040-1997 | 石油产品硫含量测定法(能量色散X射线荧光光谱法) | Petroleum products--Determination of sulfur--Energy-dispersive X-ray fluorescence spectroscopy |
| EQV ASTM D 4294-90(1995) | GB/T 17606-1998 | 原油中硫含量的测定 能量--色散X射线荧光光谱法 | Determination of sulfur in Crude-oil by Energr-Dispersive X-Ray fluorescence spectroscopy |
| NEQ ASTM D4308-83 | GB/T 12582-1990 | 液态烃类电导率测定法 (精密静电计法) | Liquid hydrocarbons - Determination of electrical conductivity - Precision meter |
| NEQ ASTM D4324-90 | GB/T 14853.3-1993 | 橡胶用造粒炭黑粒子磨损量的测定 | Rubber compounding ingredients--Carbon black, pelletized--Determination of pellet atrition |
| NEQ ASTM D4327 | GB/T 14642-1993 | 工业循环冷却水及锅炉水中氟、氯、磷酸根、亚硝酸根、硝酸根和硫酸根的测定 离子色谱法 | Industrial circulating cooling water and boiler water--Determination of fluoride, chloride, phosphate, nitrile, nitrate and sulfate--Ion chromatography |
| EQV ASTM D 4367-94 | GB/T 17474-1998 | 烃类溶剂中苯含量测定法(气相色谱法) | Standard test method for benzene in hydrocarbon solvents by gas chromatography |
| NEQ ASTM D4377:1993 | GB/T 11146-1999 | 原油水含量测定法(卡尔 - 费休法) | Crude oils--Determination of water--Karl Fischer reagent method |
| NEQ ASTM D4384-84(1989) | GB/T 16867-1997 | 聚苯乙烯和丙烯腈-丁二烯-苯乙烯树脂中残留苯乙烯单体的测定 气相色谱法 | Determination of residual styrene monomer in polystyrene and acrylonitrile-butadiene-styrene resins by gas chromatography |
| EQV ASTM D 4416-89 | GB/T 17529.1-1998 | 工业丙烯酸 | Acrylic acid for industrial use |
| EQV ASTM D4475-85 | GB/T 13096.4-1991 | 拉挤玻璃纤维增强塑料杆表观水平剪切强度短梁剪切试验方法 | Test method for apparent horizontal shear strength of pultruded glass fiber reinforced plastic rods by the short beam method |
| EQV ASTM D4476-85 | GB/T 13096.2-1991 | 拉挤玻璃纤维增强塑料杆弯曲性能试验方法 | Test method for flexural properties of pultruded glass fiber reinforced plastic rods |
| NEQ ASTM D 4533-85 | GB/T 13763-1992 | 土工布梯形法撕破强力试验方法 | Standard test method for trapezoid tearing strength of geotextiles |
| IDT ASTM D 4590-95a | GB/T 12688.8-1998 | 工业用苯乙烯中阻聚剂(对-特丁基邻苯二酚)含量的测定 分光光度法 | Styrene for industrial use--Determination of content of inhibitor(p-tert-butylcatechol)--Spectophotometric method |
| EQV ASTM D4607-86 | GB/T 7702.7-1997 | 煤质颗粒活性炭试验方法 碘吸附值的测定 | Standard test method for granutar activated carbon from coal--Determination of iodine number |
| NEQ ASTM D 4671-87 | GB/T 12008.7-1992 | 聚醚多元醇中不饱和度的测定 | Polyether Polyols--Determination of unsaturation |
| EQV ASTM D 4709-93 | GB/T 17529.2-1998 | 工业丙烯酸甲酯 | Methyl Acrylate for industrial use |
| NEQ ASTM D4738-90 | GB/T 13235.2-1991 | 石油和液体石油产品 立式圆筒形金属油罐容积标定法 (光学参比线法) | Petroleum and liquid petroleum products - Volumetric calibration of vertical cylindrical metal tanks - Optical reference line method |
| EQV ASTM D 4806:1999 | GB 18350-2001 | 变性燃料乙醇 | Denatured fuel ethanol |
| EQV ASTM D4821-92 | GB/T 15338-1994 | 炭黑试验方法精密度和偏差的确认 | Standard guide for carbon black--Validation of test method precision and bias |
| EQV ASTM D 4929:1994 | GB/T 18612-2001 | 原油中有机氯含量的测定 微库仑计法 | Determination of organic chloride content in crude oil by combustion and microcoulometry |
| NEQ ASTM D5127:1990 | GB/T 11446.1-1997 | 电子级水 | Electronic grade water |
| NEQ ASTM D5127:1990 | GB/T 11446.4-1997 | 电子级水电阻率的测试方法 | Test methods for resistivity of electronic grade water |
| NEQ ASTM D5127:1990 | GB/T 11446.5-1997 | 电子级水中痕量金属的原子吸收分光光度测试方法 | Test method for measuring trace metals in electronic grade water by atomic absorption spectrophotometry |
| NEQ ASTM D5127:1990 | GB/T 11446.6-1997 | 电子级水中二氧化硅的分光光度测试方法 | Test method for Si2O in electronic grade water by spectrophotometer |
| NEQ ASTM D5127:1990 | GB/T 11446.7-1997 | 电子级水中痕量氯离子、硝酸根离子、磷酸根离子、硫酸根离子的离子色谱测试方法 | Test method for trace chloride,nitrate,phosphate,sulfate in electronic grade water by ion-chromatography |
| NEQ ASTM D5127:1990 | GB/T 11446.9-1997 | 电子级水中微粒的仪器测试方法 | Test method for particles in electronic grade water by instrument |
| NEQ ASTM D5127:1990 | GB/T 11446.10-1997 | 电子级水中细菌总数的滤膜培养测试方法 | Test method for total bacterial count in electronic grade water by membrane filters |
| NEQ ASTM D5127-90 | GB/T 11446.8-1997 | 电子级水中总有机碳的测试方法 | Test method for total organic carbon in electronic grade water |
| EQV ASTM D5135-95 | GB/T 12688.1-1998 | 工业用苯乙烯纯度的测定 毛细管气相色谱法 | Styrene for industrial use--Determination of purity--Capillary gas chromatography |
| NEQ ASTM D5196:1991 | GB/T 11446.3-1997 | 电子级水测试方法通则 | Generic rules for test methods of electronic grade water |
| EQV ASTM D 5236-95 | GB/T 17475-1998 | 重烃类混合物蒸馏试验方法(真空釜式蒸馏法) | Standard test method for distillation of heavy hydrocarbon mixtures(Vacuum potstill method) |
| EQV ASTM D 5272-92 | GB/T 17603-1998 | 光解性塑料户外暴露试验方法 | Method for outdoor exposure testing of photodegradable plastics |
| EQV ASTM D5293:1998 | GB/T 6538-2000 | 发动机油表观粘度测定法(冷启动模拟机法) | Engine oils-Determination of apparent viscosity--Using the cold-cranking simulator |
| EQV ASTM D5762:1995 | GB/T 17674-1999 | 原油及其产品中氮含量的测定 化学发光法 | Determination of nitrogen in petroleum and petroleum products by chemiluminescence method |
| IDT ASTM D5799:1995 | GB/T 17828-1999 | 工业用丁二烯中过氧化物含量的测定 滴定法 | Butadiene for industrial use--Determination of peroxides--Titrimetric method |
| NEQ ASTM D5863 | GB/T 18608-2001 | 原油中铁、镍、钠、钒含量的测定 原子吸收光谱法 | Standard test methods for determination of iron, nickel,sodium,and vanadium in crude oil by atomic absorption spectrometry |
| 国際整合 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
| NEQ ASME Y-12-89
ASTM E5【廃版】 |
GB/T 18182-2000 | 金属压力容器声发射检测及结果评价方法 | Acoustic emission examination and evaluation of metallic pressure vessels |
| NEQ ASTM E9-81 | GB/T 7314-1987 | 金属压缩试验方法 | Metallic materials--Compression testing |
| NEQ ASTM E23-88 | GB/T 12778-1991 | 金属夏比冲击断口测定方法 | Metallic materials - Determination of Charpy impact fracture surface |
| NEQ ASTM E30-80 | GB/T 223.3-1988 | 钢铁及合金化学分析方法 二安替比林甲烷磷钼酸重量法测定磷量 | Methods for chemical analysis of iron, steel and alloy--The diantipyryl methane phosphomolybdate gravimetric method for the determination of phosphorus content |
| NEQ ASTM E30-82 | GB/T 223.52-1987 | 钢铁及合金化学分析方法 盐酸羟胺- 碘量法测定硒量 | Methods for chemical analysis of iron, steel and alloy--The hydroxylamine hydrochloride-iodometric method for the determination of selenium content |
| IDT ASTM E35-63 | GB/T 13748.8-1992 | 镁及镁合金化学分析方法 2,9-二甲基-1,10- 二氮杂菲分光光度法测定铜量 | Magnesium and its alloys--Determination of copper content--2,9-dimethyl-1,10-phenanthroline spectrophotometric method |
| NEQ ASTM E55-91 | GB/T 17432-1998 | 变形铝及铝合金化学成分分析取样方法 | Methods of sampling for analysing the chemical composition of wrought aluminum and aluminum alloy |
| NEQ ASTM E96-80 | GB/T 1037-1988 | 塑料薄膜和片材透水蒸气性试验方法 杯式法 | Test method for water vapor transmission of plastic film and sheet--Cup method |
| NEQ ASTM E111-82 | GB/T 8653-1988 | 金属杨氏模量、弦线模量、切线模量和泊松比试验方法 (静态法) | Metallic materials--Determination of Young's modulus, chord modulus, tangent modulus and Poisson's ratio (statical method) |
| IDT ASTM E 155-85 | GB/T 13820-1992 | 镁合金铸件 | Magnesium alloy castings |
| NEQ ASTM E208-81 | GB/T 6803-1986 | 铁素体钢的无塑性转变温度落锤试验方法 | Standard method for conducting drop-weight test to determine nilductility transition temperature of ferritic steels |
| NEQ ASTM E 228-1995 | GB/T 4339-1999 | 金属材料热膨胀特征参数的测定 | Testing method for thermal expansion characteristic parameters of metallic materials |
| EQV ASTM E243-90 | GB/T 5248-1998 | 铜及铜合金无缝管涡流探伤方法 | Copper and copper alloy-seamless tubes-eddy current testing method |
| NEQ ASTM E251-86 | GB/T 13301-1991 | 金属材料电阻应变灵敏系数试验方法 | Metals - Testing method for sensitivity of electrical resistance strain |
| NEQ ASTM E289-70 | GB/T 10562-1989 | 金属材料超低膨账系数测定方法 光干涉法 | Metallic material - Standard test method for the extra-low expansion coefficient - Light interferometer method |
| NEQ ASTM E300-83 | GB/T 6678-1986 | 化工产品采样总则 | General principles for sampling chemical products |
| NEQ ASTM E 328-1986 | GB/T 10120-1996 | 金属应力松弛试验方法 | Metallic materials--Stress relaxation test |
| NEQ ASTM E350-85 | GB/T 223.63-1988 | 钢铁及合金化学分析方法 高碘酸钠(钾)光度法测定锰量 | Methods for chemical analysis of iron, steel and alloy--The sodium (potassium) periodate photometric method for the determination of manganese content |
| IDT ASTM E 00402-81【旧版】 | GB/T 13374-1992 | 八氧化三铀中杂质元素的光谱测定--氧化镓载带法 | Spectrographic analysis of uranium oxide (U3O8) by gallium oxide-carrier technique |
| EQV ASTM E 428:1992 | GB/T 11259-1999 | 超声波检验用钢对比试块的制作与校验方法 | Standard practice for fabrication and control of steel reference blocks used in ultrasonic inspection |
| NEQ ASTM E436-74 | GB/T 8363-1987 | 铁素体钢落锤撕裂试验方法 | Metallic materials--Drop-weight tear tests of ferritic steels |
| EQV ASTM E536-84 | GB/T 12689.1-1990 | 锌及锌合金化学分析方法 EDTA滴定法测定铝量 | Zinc and zinc alloys - Determination of aluminium content - EDTA titrimetric method |
| EQV ASTM E536-84 | GB/T 12689.9-1990 | 锌及锌合金化学分析方法 火焰原子吸收光谱法测定铜量 | Zinc and zinc alloys - Determination of copper content - Flame atomic absorption spectrometric method |
| EQV ASTM E536-84 | GB/T 12689.10-1990 | 锌及锌合金化学分析方法 火焰原子吸收光谱法测定铅量 | Zinc and zinc alloys - Determination of lead content - Flame atomic absorption spectrometric method |
| NEQ ASTM E 604-83 | GB/T 5482-1993 | 金属材料动态撕裂试验方法 | Metallic materials--Dynamic tear testing method |
| EQV ASTM E606-91 | GB/T 15248-1994 | 金属材料轴向等幅低循环疲劳试验方法 | The test method for axial loading constant-amplitude low-cycle fatigue of metallic materials |
| NEQ ASTM E 611-77(87) | GB/T 14571.2-1993 | 工业用乙二醇中二乙二醇和三乙二醇含量的测定 气相色谱法 | Monoethylene glycol for industrial use--Determination of diethylene glycol and triethylene glycol--Gas chromatographic method |
| EQV ASTM E647:1995 | GB/T 6398-2000 | 金属材料疲劳裂纹扩展速率试验方法 | Standard test method for fatigue crack growth rates of metallic materials |
| EQV ASTM E662-83 | GB/T 8323-1987 | 塑料燃烧性能试验方法 烟密度法 | Test method for flammability of plastics--Smoke density test |
| EQV ASTM E662-83 | GB/T 10671-1989 | 固体材料产烟的比光密度试验方法 | Test method for specific optical density of smoke generated by solid materials |
| IDT ASTM E673-85 | GB/T 13592-1992 | 表面分析术语 | Terms relating to surface analysis |
| NEQ ASTM E682-79 | GB/T 9008-1988 | 液相色谱法术语 柱液相色谱法和平面色谱法 | Terms of liquid chromatography--Liquid column chromatography and planar chromatography |
| EQV ASTM E698:1979(1993) | GB/T 17802-1999 | 可燃物质动力学常数的热分析试验方法 | Thermal analysis test methods for kinetic constants of combustible materials |
| NEQ ASTM E709-85 | GB/T 10121-1988 | 钢材塔形发纹磁粉检验方法 | Steel products--Method for magnetic particle inspection of tower sample |
| NEQ ASTM E740-80 | GB/T 7732-1987 | 金属板材表面裂纹断裂韧度Kle试验方法 | Standard test method for surface-crack fracture toughness Kle of metallic plates |
| EQV ASTM E756:1993 | GB/T 18258-2000 | 阻尼材料 阻尼性能测试方法 | Damping materials Test method for damping properties |
| NEQ ASTM E832-81 | GB/T 1914-1993 | 化学分析滤纸 | Chemical analytical filter paper |
| NEQ ASTM E 855-90 | GB/T 14452-1993 | 金属弯曲力学性能试验方法 | Metallic materials--Determination of bending mechanical properties |
| NEQ ASTM E1019-85 | GB/T 4333.10-1990 | 硅铁化学分析方法 红外线吸收法测定碳量 | Methods for chemical analysis of ferrosilicon - The infrared absorption method for the determination of carbon content |
| EQV ASTM E1019-85 | GB/T 8705.1-1988 | 磷铁化学分析方法 红外线吸收法测定碳量 | Methods for chemical analysis of ferrophosphorus--The infrared absorption method for the determination of carbon content |
| EQV ASTM E1019-85 | GB/T 8705.3-1988 | 磷铁化学分析方法 红外线吸收法测定硫量 | Methods for chemical analysis of ferrophosphorus--The infrared absorption method for the determination of sulfur content |
| NEQ ASTM E1026-84 | GB/T 139-1989 | 使用硫酸亚铁剂量计测量水中吸收剂量的标准方法 | Standard method for using the ferrous sulfate(Fricke) dosimeter to measure absorbed dose in water |
| NEQ ASTM E 1261-1994 | GB/T 16640-1996 | 辐射加工剂量测量系统的选择和校准导则 | Standard guide for selection and calihratioon of dosimetry systems for radiation processing |
| EQV ASTM E1316-91 | GB/T 12604.7-1995 | 无损检测术语 泄漏检测 | Terminology for nondestructive testing--Leak testing |
| EQV ASTM E1316-91 | GB/T 12604.8-1995 | 无损检测术语 中子检测 | Terminology for nondestructive testing--Neutron testing |
| EQV ASTM E1465:1992 | GB/T 17785-1999 | 新建低层住宅建筑设计与施工中氡控制导则 | Standard guide for radon control options for the design and construction of new low rise residential buildings |
| NEQ ASTM E 1607-94 | GB/T 16639-1996 | 辅射加工用丙氨酸-EPR剂量测量系统 | Alanine--EPR dosimetry system for radiation processing |
| NEQ ASTM E1649-1994 | GB/T 16841-1997 | 能量为300keV？25MeV电子束辐射加工装置剂量学导则 | Guide for dosimetry in an electron beam facility for radiation processing at energies between 300keV and 25MeV |
| NEQ ASTM E 1707-95 | GB/T 16509-1996 | 辐射加工剂量测量不确定度评估导则 | Standard guide for estimating uncertainties in dosimetry for radiation processing |
| NEQ ASTM E 1707-95 | GB/T 16510-1996 | 辐射加工剂量学校准实验室的能力要求 | The requirements for the competence of a radiation processing dosimetry calibration laboratory |
| NEQ ASTM E81:1990 | GB/T 17103-1997 | 金属材料定量极图的测定 | Metal material--Quantitative pole figure preparing method |
| 国際整合 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
| EQV ASTM F26-87a | GB/T 1555-1997 | 半导体单晶晶向测定方法 | Test methods for determining the orientation of a semiconductor single crystal |
| EQV ASTM F42-88 | GB/T 1550-1997 | 非本征半导体材料导电类型测试方法 | Standard methods for measuring conductivity type of extrinsic semiconducting materials |
| EQV ASTM F47-88 | GB/T 1554-1995 | 硅晶体完整性化学择优腐蚀检验方法 | Test method for crystallographic perfection of silicon by preferential etch techniques |
| EQV ASTM F47-88 | GB/T 4058-1995 | 硅抛光片氧化诱生缺陷的检验方法 | Test method for detection of oxidation induced defects in polished silicon wafers |
| NEQ ASTM F70 | GB/T 10307-1988 | 阴极碳酸盐牌号命名方法 | Designation for cathode carbonates |
| EQV ASTM F72:1994 | GB/T 8750-1997 | 半导体器件键合金丝 | Gold wire for semiconductor devices lead bonding |
| NEQ ASTM F78-79 | GB/T 5778-1986 | 膨胀合金气密性试验方法 | Determination of hermeticity of expansion alloys |
| NEQ ASTM F80-85 | GB/T 14142-1993 | 硅外延层晶体完整性检查方法 腐蚀法 | Test method for crystallographic perfection of epitaxial layers in silicon by etching techniques |
| EQV ASTM F81-82 | GB/T 11073-1989 | 硅片径向电阻率变化的测量方法 | Standard method for measuring radial resistivity variation on silicon slices |
| EQV ASTM F95-89 | GB/T 14847-1993 | 重掺杂衬底上轻掺杂硅外延层厚度的红外反射测量方法 | Test method for thickness of lightly doped silicon epitaxial layers on heavily doped silicon substrates by infrared reflectance |
| NEQ ASTM F119:1989 | GB/T 16929-1997 | 包装材料试验方法 透油性 | Test method for oil transmission rate of packaging material |
| NEQ ASTM F121-83 | GB/T 1557-1989 | 硅晶体中间隙氧含量的红外吸收测量方法 | The method of determining interstitial oxygen content in silicon by infrared absorption |
| NEQ ASTM F121-83 | GB/T 14143-1993 | 300 - 900μm硅片间隙氧含量红外吸收测量方法 | 300 - 900μm Silicon slices--Measuring of interstitial oxygen content--Infrared absorption method |
| EQV ASTM F123-91 | GB/T 1558-1997 | 硅中代位碳原子含量红外吸收测量方法 | Test method for substitutional atomic carbon content of silicon by infrared absorption |
| EQV ASTM F28:1990 | GB/T 1553-1997 | 硅和锗体内少数载流子寿命测定光电导衰减法 | Standard test methods for minority carrier lifetime in bulk germanium and silicon by measurement of photoconductivity decay |
| NEQ ASTM F359-90 | GB/T 15078-1994 | 贵金属电触点材料接触电阻的测量方法 | Measuring method for contact resistance of precious metal electrical contact materials |
| EQV ASTM F 374-84【旧版】 | GB/T 14141-1993 | 硅处延层、扩散层和离子注入层薄层电阻的测定 直排四探针法 | Test method for sheet resistance of silicon epitaxial, diffused and ion-implanted layers using a collinear four-probe array |
| NEQ ASTM F389-84 | GB/T 8756-1988 | 锗晶体缺陷图谱 | Collection of metallographs on defects of crystalline germanium |
| NEQ ASTM F397-88 | GB/T 1551-1995 | 硅、锗单晶电阻率测定 直流两探针法 | Test method for resistivity of silicon and germanium bars using a two-point probe |
| NEQ ASTM F397-88 | GB/T 1552-1995 | 硅、锗单晶电阻率测定 直排四探针法 | Test method for measuring resistivity of monocrystal silicon and germanium with a collinear four-probe array |
| NEQ ASTM F398-77 | GB/T 8757-1988 | 砷化镓中载流子浓度等离子共振测量方法 | Determination of carrier concentration in gallium arsenide by the plasma resonance minimum |
| NEQ ASTM F487-88 | GB/T 8646-1998 | 半导体键合铝--1%硅细丝 | Fine aluminum-1% silicon wire for semiconductor lend-bonding |
| NEQ ASTM F522-84 | GB/T 14145-1993 | 硅外延层堆垛层错密度测定 干涉相衬显微镜法 | Test method for stacking fault density of epitaxial layers of silicon by interference-contrast microscopy |
| EQV ASTM F523-88 | GB/T 6624-1995 | 硅抛光片表面质量目测检验方法 | Standard method for measuring the surface quality of polished silicon slices by visual inspection |
| EQV ASTM F533-90 | GB/T 6618-1995 | 硅片厚度和总厚度变化测试方法 | Test method for thickness and total thickness variation of silicon slices |
| EQV ASTM F 534-91 | GB/T 6619-1995 | 硅片弯曲度测试方法 | Test methods for bow of silicon slices |
| EQV ASTM F 613-87 | GB/T 14140.1-1993 | 硅片直径测量方法 光学投影法 | Silicon slices and wafers--Measuring of diameter--Optical projecting method |
| EQV ASTM F657-91 | GB/T 6620-1995 | 硅片翘曲度非接触式测试方法 | Test method for measuring warp on silicon slices by noncontact scanning |
| IDT ASTM F671-83 | GB/T 13387-1992 | 电子材料晶片参考面长度测量方法 | Test method for measuring flat length on slices of electronic materials |
| EQV ASTM F673-90 | GB/T 6616-1995 | 半导体硅片电阻率及硅薄膜薄层电阻测定 非接触涡流法 | Test method for measuring resistivity of semiconductor silicon or sheet resistance of semiconductor films with a noncontact eddy-current gage |
| EQV ASTM F673-90 | GB/T 6617-1995 | 硅片电阻率测定 扩展电阻探针法 | Test method for measuring resistivity of silicon wafers using spreading resistance probe |
| IDT ASTM F723-87 | GB/T 13389-1992 | 掺硼掺磷硅单晶电阻率与掺杂剂浓度换算规程 | Practice for conversion between resistivity and dopant density for boron-doped and phosphorus-doped silicon |
| EQV ASTM F775-88 | GB/T 6621-1995 | 硅抛光片表面平整度测试方法 | Test methods for surface flatness of silicon polished slices |
| IDT ASTM F847-83 | GB/T 13388-1992 | 硅片参考面结晶学取向Ｘ射线测量方法 | Method for measuring crystallographic orientation of flats on single crystal silicon slices and wafers by X-ray techniques |
| EQV ASTM F951-87 | GB/T 14144-1993 | 硅晶体中间隙氧含量径向变化测量方法 | Test method for determination of radial interstitial oxygen variation in silicon |
| NEQ ASTM F 1241-89 | GB/T 14264-1993 | 半导体材料术语 | Semiconductor materials--Terms and definitions |
| 国際整合 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
| IDT ASTM G16-71 | GB/T 12336-1990 | 腐蚀数据统计分析标准方法 | Standard practice for applying statistics analysis of corrosion data |
| EQV ASTM G23-81 | GB/T 11189.2-1989 | 非金属材料曝露试验用的有水和无水光曝露设备(碳弧型)及实施方法 | Operating light-exposure apparatus (carbon-arc type) with and without water and testing method for exposure of nonmetallic materials |
| EQV ASTM G26-83 | GB/T 11189.1-1989 | 非金属材料曝露试验用的有水和无水光曝露设备(氙弧型)及实施方法 | Operating light-exposure apparatus (xenon-arc type) with and without water and testing method for exposure of nonmetallic materials |
| NEQ ASTM G 31:1995 | GB/T 18175-2000 | 水处理剂缓蚀性能的测定 旋转挂片法 | Determination of corrosion inhibition performance of water treatment agents--Rotation specimen method |
| NEQ ASTM G48-80 | GB/T 10127-1988 | 不锈钢三氯化铁缝隙腐蚀试验方法 | Stainless steels--Method of ferric chloride crevice corrosion test |
| NEQ ASTM G52-76 | GB/T 5776-1986 | 金属材料在表面海水中常规暴露腐蚀试验方法 | Method for surface seawater exposure corrosion tests of metallic materials |
| NEQ ANSI/ASTM G 52-76【旧版】 | GB/T 6384-1986 | 船舶及海洋工程用金属材料在天然环境中的海水腐蚀试验方法 | The testing methods for seawater corrosion in natural environment of metallic materials for ship and offshore structures |
| EQV ASTM G 53-1988 | GB/T 16585-1996 | 硫化橡胶人工气候老化(荧光紫外灯)试验方法 | Rubber,vulcanized--Test method of resistance to artificial weathering (Fluorescent UV lamp) |
| NEQ ASTM G 53-84 | GB/T 14522-1993 | 机械工业产品用塑料、涂料、橡胶材料人工气候加速试验方法 | Accelerated weathering test method for plastics, coatings and rubber materials used for machinery industrial products |
| NEQ ASTM G71-81 | GB/T 15748-1995 | 船用金属材料电偶腐蚀试验方法 | The method of galvanic corrosion test for metallic ship materials |
| EQV ASTM K2220-93 | GB/T 5671-1995 | 汽车通用锂基润滑脂 | General purpose lithium base grease for automobile |
| EQV ASTM P 5185-95 | GB/T 17476-1998 | 使用过的润滑油中添加剂元素、磨损金属和污染物以及基础油中某些元素测定法(电感耦合等离子体发射光谱法) | Standard test method for determination of additive elements,wear metals,and contaminants in used lubricanting oils and determination of selected elements in base oils by inductively coupled plasma atomic emission spectrometry(ICP-AES) |
| NEQ ANSI/ASTM PTC25.3-76 | GB/T 12242-1989 | 安全阀 性能试验方法 | Performance test methods for safety valves |
| NEQ ASTM STP 509A/1-86 | GB/T 9933-1988 | 内燃机油性能评定法 (开特皮勒1G2法) | The test method for evaluating the performance of internal combustion engine oil (Caterpillar 1G2 method) |
| NEQ ASTM STP 509A/2-86 | GB/T 9932-1988 | 内燃机油性能评定法(开特皮勒1H2法) | The test method for evaluating the performance of internal combustion engine oil (Caterpillar 1H2 method) |
| NEQ ASTM T47-84 | GB/T 8760-1988 | 砷化镓单晶位错密度的测量方法 | Gallium arsenide single crystal--Determination of dislocation density |
| NEQ ASTM 2291-83 | GB/T 2578-1989 | 纤维缠绕增强塑料环形试样制作方法 | Fabrication method of ring test specimen for filament -winding reinforced plastics |
| NEQ ASTM 2504-88 | GB/T 3393-1993 | 工业用乙烯、丙烯中微量氢的测定 气相色谱法 | Ethylene and propylene for industrial use--Determination of trace of hydrogen--Gas chromatographic method |
| EQV ASTM 3541-91 | GB/T 17529.5-1998 | 工业丙烯酸2-乙基己酯 | 2-ethylhexyl acrylate for industrial use |
| NEQ ASTM 428:1995 | GB/T 18226-2000 | 高速公路交通工程钢构件防腐技术条件 | Specification for steel component anticorrosion of highway traffic engineering appurtenances |
| 国際整合 | 規格番号 | 規格名称(中国語) | 規格名称(英語) |
ご意見、ご要望、ご質問 は、