Updated

GOST規格の説明
ロシア国家標準、旧ソ連邦標準
(GOST R, GOST規格) ICS(国際規格分類)コード順一覧
大分類 17


17 List 度量衡及び測定、物理的現象
17.020 度量衡及び測定一般
注: 測定器全般に関する問題、標準数、標準計量等を含む。
17.040 線及び角度の測定
17.060 体積、質量、密度、粘度の測定
注: 測定器を含む
注: 石油製品及び天然ガスの計量→ 75.180.30
17.080 時間、速度、加速度、角速度の測定
注: 測定器を含む
注: 時間測定器→ 39.040
17.100 力、重さ及び圧力の測定
注: 測定器を含む
17.120 流量の測定
注: 測定器及び設備を含む。
17.140 音響及び音響測定
注: 測定器及び試験装置を含む。
注: 騒音(環境問題)→ 13.140
注: 建物における音響問題→ 91.120.20
17.160 振動、衝撃及び振動の測定
注: 振動及びショック(環境問題)→ 13.160
注: 釣り合い及び釣合試験機→ 21.120.40
注: 建物の振動防護→ 91.120.25
17.180 光学及び光学的測定
17.200 熱力学及び温度測定
17.220 電気学.磁気学.電気的及び磁気的測定
17.240 放射線測定
注: 放射線防護→ 13.280

手持ちの情報を整理したものであり、規格原本による確認は行っていません。
すべてを網羅しているわけでも、正確さ、最新性を保証するものではありませんので、 規格原本などで確認してください。
17.020 Top 度量衡及び測定一般
注: 測定器全般に関する問題、標準数、標準計量等を含む。
Sort Mk 規格番号 規格名称(英語) 国際規格分類
( ICSコードの説明 )
00001-11 1999   GOST R 1.11-99 State system for standardization of Russian Federation. Metrological expert evaluation of state standards projects 01.120
17.020
00001-25 1976   GOST 1.25-76 State system of standardization. Metrological assurance. General 01.120
17.020
00008-0000 2000   GOST R 8.000-2000 State system for ensuring the uniformity of measurements. Basic principles 17.020
00008-0008 1972   GOST 8.008-72 State system for ensuring the uniformity of measurements. Methods and means for verification of indicating and recording pneumatic control instruments 17.020
00008-0009 1984   GOST 8.009-84 State system for ensuring the uniformity of measurements. Standardized metrological characteristic of measuring instruments 17.020
00008-0016 1981   GOST 8.016-81 State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means measuring plane angle 17.040.30
17.020
00008-0018 1982 GOST 8.018-82 [withdrawn]
State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means measuring temperature coefficient of linear expansion in the range from 90 to 1800 K
17.020
00008-0018 2008 GOST 8.018-2007 State system for ensuring the uniformity of measurements. State verification schedule for means of LTEC measurements of solid substances in temperature range from 90 to 1800 K 17.020
00008-0019 1985   GOST 8.019-85 State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means measuring electrical capacity and tangent loss angle 17.020
00008-0021 2005   GOST 8.021-2005 State system for ensuring the uniformity of measurements. State verification schedule for mass measuring instruments 17.020
00008-0024 2002   GOST 8.024-2002 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring density 17.020
00008-0027 2001   GOST 8.027-2001 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of direct electrical vortage and electromotive force 17.020
17.220.20
00008-0044 1980   GOST 8.044-80 State system for ensuring the uniformity of measurements. Diamond indentors of the hardness testing machines for metal and alloys. Verification methods and means 19.060
17.020
00008-0057 1980   GOST 8.057-80 State system of ensuring the uniformity of measurements. Procedure of acceptance, maintenance and use of standards and standard measuring means 17.020
00008-0061 1980   GOST 8.061-80 State system for ensuring the uniformity of measurements. Verification schedules. Scope and layont 17.020
00008-0062 1985   GOST 8.062-85 State system for ensuring the uniformity of measurements. State special standart and state verification schedule for measuring means of hardness on Brinell scales 17.020
19.060
00008-0063 1979 GOST 8.063-79 [withdrawn]
State system for ensuring the uniformity of measurements. State special standard and the all-union verification schedule for means measuring of hardness on Vickers scales
19.060
17.020
00008-0063 2007 GOST 8.063-2007 State system for ensuring the uniformity of measurements. State verification schedule for means measuring the metals and alloys hardness on Vickers scales 17.020
00008-0064 1994   GOST 8.064-94 State system for ensuring the uniformity of measurements. State verification shedule for means measuring of hardness on Rockwell and Super-Rockwell scales 17.020
00008-0087 1981   GOST 8.087-81 State system for ensuring the uniformity of measurements. Dosimetriс set-ups for calibrating photon and electron radiation. Methods and means of calibration 17.240
17.020
00008-0089 1973   GOST 8.089-73 State system for ensuring the uniformity of measurements. Spherometers. Verification methods and means 17.040.30
17.020
00008-0099 1973   GOST 8.099-73 State system for ensuring the uniformity of measurement. Cludicating hole gauges graduated in 0,01mm. Methods and means of verification 17.040.30
17.020
00008-0106 2001   GOST 8.106-2001 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring the radiance and radiant intensity of heat sources within temperature range of 220 - 1360 K 17.020
00008-0109 1997   GOST 8.109-97 State system for ensuring the uniformity of measurements. State verification schedule for means measuring the amplitude modulation factor of high frequency oscillations 17.020
33.140
00008-0110 1997   GOST 8.110-97 State system for ensuring the uniformity of measurements. State verification schedule for means measuring the distortion coefficient 17.020
33.140
00008-0113 1985   GOST 8.113-85 State system for ensuring the uniformity of measurements. Vernier callipers. Verification methods 17.040.30
17.020
00008-0114 1974   GOST 8.114-74 State system for ensuring the uniformity of measurements. Vertical optical length comparators. Methods an means of verification 17.040.30
17.020
00008-0120 1983   GOST 8.120-83 State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means measuring pH 71.040.30
17.020
00008-0120 1999   GOST 8.120-99 State system for ensuring the uniformity of measurement. State verification schedule for means measuring pH 17.020
71.040.30
00008-0122 1985   GOST 8.122-85 State system for ensuring the uniformity of measurements. Rotameters. Methods of verifications 17.120.10
17.020
00008-0122 1999   GOST 8.122-99 State system for ensuring the uniformity of measurements. Rotameters. Methods of verification 17.020
00008-0134 1974   GOST 8.134-74 PH scale for aqueous solutions 71.040.30
17.020
00008-0135 2004   GOST 8.135-2004 Interstate system for ensuring the uniformity of measurements. Weight amouhts of the standard materials for preparation of the buffer solutions - operational pH standards of 2-nd and 3-rd classes. The technical and the metrological characteristics. Methods of them determination 17.020
00008-0147 1975   GOST 8.147-75 State system for ensuring the uniformity of measurements. Measurement tool СЦ type for gear whell runout. Verification methods and means 17.040.30
17.020
00008-0163 1975   GOST 8.163-75 State system for ensuring the uniformity of measurement. Depth gauges 17.040.30
17.020
00008-0164 1975   GOST 8.164-75 State system for ensuring the uniformity of measurements. Vernier height gauges. Methods and means for verification 17.040.30
17.020
00008-0165 1975   GOST 8.165-75 State system ensuring the uniformity of measurement. Sine bars. Methods and means for verification 17.040.30
17.020
00008-0181 1976   GOST 8.181-76 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring of evolvent surfaces's parameters 17.040.30
17.020
00008-0182 1976   GOST 8.182-76 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring spectrum parameters of electronic paramagnetic resonance 17.020
33.140
00008-0197 2005   GOST 8.197-2005 State system for ensuring the uniformity of measurements. State verification scheme for instruments measuring of the spectral radiance in spectral range from 0,04 to 0,25 мюm 17.020
00008-0206 1976   GOST 8.206-76 State system for ensuring the uniformity of measurements. The measuring pulse generators. Methods and means for verification 17.020
33.140
00008-0207 1976   GOST 8.207-76 State system for ensuring the uniformity of measurements. Direct measurements with multiple observations. Methods of processing the results of observations. Basic principles 17.020
00008-0211 1984   GOST 8.211-84 State system for ensuring the uniformity of measurements. Ocular screw micrometer. Methods and means of verification 17.040.30
17.020
00008-0213 1976   GOST 8.213-76 State system for ensuring the uniformity of measurements. Glass electrodes for measuring the ion activity of sodium and potassium. Methods and means of verification 71.040.10
17.020
00008-0217 2003   GOST 8.217-2003 State system for ensuring the uniformity of measurements.Сurrent transformers. Verification procedure 17.020
00008-0221 1976   GOST 8.221-76 State system of ensuring the uniformity of measurements. Humidimetry and hydrometry. Terms and definitions 01.040.17
17.020
00008-0237 2003   GOST 8.237-2003 State system for ensuring the uniformity of measurements. Single-value electrical resistance measures. Verification procedure 17.020
00008-0247 2004   GOST 8.247-2004 State system for ensuring the uniformity of measurements. Meyer stick for oil product level measuring in horisontal tanks. Calibration methods 17.020
00008-0254 1977   GOST 8.254-77 State system for ensuring the uniformity of meanurements. Measuring receivers. Methods and means for verification in frequency range from 1 to 37,5 GHz 17.020
33.140
00008-0255 2003   GOST 8.255-2003 State system for ensuring the uniformity of measurements. Electrical capacity measures. Verification procedure 17.020
00008-0256 1977   GOST 8.256-77 State system for ensuring the uniformity of measurements. Standardization and determination of dynamic characteristics of analogue measuring instruments. Basic principles 17.020
00008-0258 1977   GOST 8.258-77 State system for ensuring the uniformity of measurements. Polarimeters and saccharimeters. Methods and means of calibration 17.020
00008-0259 2004   GOST 8.259-2004 State system for ensuring the uniformity of measurements. Electrical induction active and reactive energy meters. Methods of verification 17.020
00008-0269 1977   GOST 8.269-77 State system for ensuring the uniformity of measurements. Measuring glass burettes for chemical non-automatic gas analyzers. Methods and means of verification 17.020
71.040.10
00008-0274 1985   GOST 8.274-85 State system for ensuring the uniformaty of measurements. State special standard and state verification schedule for means of measuring complex permittivity and complex permeability as well as reflection factor modulus at frequencies of 0,2 - 1,0 GHz 17.020
33.140
00008-0275 2007 GOST 8.275-2007 State system for ensuring the uniformity of measurements. State verification schedule for means measuring the lasеr output average power and laser pulse energy within the wavelength range from 0,3 to 12,0 m 17.020
00008-0283 1978   GOST 8.283-78 State system for ensuring the uniformity of measurements. Electromagnet flaw detector. Methods and means of verification 19.100
17.020
00008-0310 1990   GOST 8.310-90 State system for ensuring the uniformity of measurements. State system of standard reference data. Basic statements 17.020
00008-0314 1978   GOST 8.314-78 State system for ensuring the uniformity of measurements. Low-frequency generators. Methods and means of verification 17.020
33.140
00008-0315 1991   GOST 8.315-91 State system for ensuring the uniformity of measuring. Reference materials. Basic principles, ways of development, certification, approval, registration and use 17.020
00008-0322 1978   GOST 8.322-78 State system for ensuring the uniformity of measurements. Measuring signal generators. Methods and means for verification within the range of 0.03-17.44 GHz 17.020
33.140
00008-0323 1978   GOST 8.323-78 State system of ensuring the unity of measurements. Standard time and frequency signals radiated by specialized radio stations of the state time service. Main parameters 17.020
00008-0324 2002   GOST 8.324-2002 State system for ensuring the uniformity of measurements. Gas meters. Calibration methods 17.020
00008-0331 1978   GOST 8.331-78 State system for ensuring the uniformity of measurements. Non-linear distortion meters. Methods and means of verification 17.020
33.140
00008-0331 1999   GOST 8.331-99 State system for ensuring the uniformity of measurement. Distortion meters. Methods and means of verification and calibration 17.220
33.140
17.020
00008-0334 1978   GOST 8.334-78 State system for ensuring the uniformity of measurements. Noise figure meters of UHF transistors and receivers. Methods and means of verification 17.020
33.100
00008-0335 1978   GOST 8.335-78 [withdrawn]
State system for ensuring the uniformity of measurements. Haroness standard blocks. Methods and means of verification
17.020
19.060
00008-0335 2004   GOST 8.335-2004 State system for ensuring the uniformity of measurements. Hardness standard blocks. Methods of verification 17.020
00008-0338 2002   GOST 8.338-2002 State system for ensuring the uniformity of measurements. Thermoelectric transducers. Verification procedure 17.020
00008-0346 2000   GOST 8.346-2000 State system for ensuring the uniformity of measurements. Steel hoisontal cylindric tanks. Calibration methods 17.020
75.180.30
00008-0354 1985   GOST 8.354-85 State system for ensuring the uniformity of measurements. Conductometric liquid analysers. Methods of verification 71.040.10
17.020
00008-0372 1980   GOST 8.372-80 State system for ensuring the uniformity of measurements. Standards of the units for physical quantitie. The ways of development, approval, registration, maintenance and use 17.020
00008-0381 1980   GOST 8.381-80 State system for ensuring the uniformity of measurements. Standards. The ways of expressing the errors 17.020
00008-0394 1980   GOST 8.394-80 State system for ensuring the uniformity of measurements Q-0272-2 second order of accuracy quality factor standard measures. Methods and means of verification 17.020
00008-0395 1980   GOST 8.395-80 State system for ensuring the uniformity of measurements. Reference conditions of measurements while calibrating. General requirements 17.020
00008-0398 1980   GOST 8.398-80 State system for ensuring the uniformity of measurements. Hardness testing machines for metals and alloys. Methods and means of verification 17.020
19.060
00008-0401 1980   GOST 8.401-80 State system for ensuring the uniformity of measurements. Accuracy classes of measuring instruments. General requirements 17.020
00008-0406 1980   GOST 8.406-80 State system for ensuring the uniformity of measurements. Hardness testing machines for rubber. Verification methods and means 17.020
19.060
00008-0417 1981   GOST 8.417-81 State system of ensuring the uniformity of measurements. Units of physical quantities 17.020
01.060
00008-0417 2002   GOST 8.417-2002 State system for ensuring the uniformity of measurements. Units of quantities 17.020
00008-0420 2002   GOST 8.420-2002 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring straightness and flatness deviation 17.020
17.040
00008-0426 1981   GOST 8.426-81 State system for ensuring the uniformity of measurements. Shere rebound hardness testing machines. Methods and means of verification 17.020
19.060
00008-0430 1988   GOST 8.430-88 State system for ensuring the uniformity of measurements. Symbols for units of physical quantities to be used inprinting devices with a limited set of signs 17.020
01.060
00008-0432 1981   GOST 8.432-81 State system for ensuring the uniformity of measurements. Grain and products of processing method of carrying out measurements of moisture on model vacuum thermal set 17.020
00008-0434 1981   GOST 8.434-81 State system for ensuring the uniformity of measurements. Humidity of grain and its processing products. Method of carrying out measurements by dielcometric and resistive moistureganges 17.020
00008-0435 1981   GOST 8.435-81 State system for ensuring the uniformity of measurements. Neasuring set line building-out networks. Methods and means for checking 17.020
00008-0436 1981   GOST 8.436-81 State system for ensuring the uniformity of measurements. Measuring sets power supply bridges. Methods and means for checking 17.220.20
17.020
00008-0441 1981   GOST 8.441-81 State system of ensuring the unity of measurements. Actual high precision measures of frequency and time. Methods and means of verification 17.080
17.020
00008-0442 1981   GOST 8.442-81 State system for ensuring the uniformity of measurements. Moisture meters neutron. Methods and means of verification 17.020
00008-0443 1981   GOST 8.443-81 State system of ensuring the uniformity of measurements. Standard instruments for monopulse and modulated puls laser radiation peak power measurements. Methods and means for verification 17.240
17.020
00008-0444 1981   GOST 8.444-81 State system of ensuring the uniformity of measurements. Standard instruments for dynamic parameter measurements of puls laser measuring transducers. Methods and means for verification 17.240
17.020
00008-0445 1981   GOST 8.445-81 State system for ensuring the uniformity of measurements. Standard means mesuring laser output average power. Methods and means for verification 17.240
17.020
00008-0457 2000   GOST 8.457-2000 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring specific conductivity of liguids 17.020
17.220.20
00008-0465 1982   GOST 8.465-82 State system of ensuring the unity of measurements. Actial frequencу of limited accuracy. Methods and means of verification 17.020
00008-0469 2002   GOST 8.469-2002 State system for ensuring the uniformity of measurements. Automatic continuous proportional weighers. Methods and means of verification 17.020
17.060
00008-0480 1982   GOST 8.480-82 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring moisture of grain and grain products 17.020
00008-0485 1983   GOST 8.485-83 State system for ensuring the uniformity of measurements. Analitical gas laboratory chromatographs. Methods and means of verification 17.020
71.040.10
00008-0489 1983   GOST 8.489-83 State system for ensuring the uniformity of measurements. Metrological assurance of analytical works with agrichemical objects. General 17.020
00008-0492 1983   GOST 8.492-83 State system for ensuring the uniformity of measurements. Actual low precision of frequency. Methods and means of verification 17.020
00008-0508 1984   GOST 8.508-84 State system for ensuring the uniformity of measurements. Metrological characteristics of measurements means and precision characteristics of automation means. General methods of estimate and control 17.020
00008-0509 1984   GOST 8.509-84 State system for ensuring the uniformity of measurements. Long-term strength and creep testing machines. Calibration methods 17.020
19.060
00008-0510 2002   GOST 8.510-2002 State system for ensuring the uniformity of measurements. State verification schedule for means measuring volume and mass of liquid 17.020
00008-0512 1984   GOST 8.512-84 State system for ensuring the uniformity of measurements. State verification schedule for means measuring humidity of non-aqueous liquids 17.020
00008-0516 1984   GOST 8.516-84 State system for ensuring the uniformity of measurments. State verification schedule for means of metal hardness testing on Shore scale D 17.020
00008-0516 2001   GOST 8.516-2001 State system for ensuring the uniformity of measurements. State verification schedule for means measuring hardness of metals according on Shore D hardness scale 17.020
00008-0518 1984   GOST 8.518-84 State system for ensuring the uniformity of measurements. Ferritometers for austenite steel. Methods of verification 17.020
77.080.20
00008-0519 1984   GOST 8.519-84 State system for ensuring the uniformity of measurements. Dielcometric moisture meters for construction materials. Calibration methods 17.020
00008-0523 2004   GOST 8.523-2004 State system for ensuring the uniformity of measurements. Gravimetric filling instruments. Verification procedure 17.020
00008-0524 1985   GOST 8.524-85 State system for ensuring the uniformity of measurements. Psychrometric tables. Constitution, content, calculating correlations 17.020
00008-0525 1985   GOST 8.525-85 State system for ensuring the uniformity of measurements. Installations of the highest accuracy for the reproduction of physical quantity units. Order of development, certification, registration, storage and application 17.020
00008-0530 1985   GOST 8.530-85 State system for ensuring the uniformity of measurements. Blast-furnace coke humidity. Techniques of measurements by neutron moisture meters 17.020
00008-0531 2002   GOST 8.531-2002 State system for ensuring the uniformity of measurements. Reference materials of composition of solid and disperse materials. Ways of homogeneity assessment 17.020
00008-0532 1985   GOST 8.532-85 State system for ensuring the uniformity of measurements. Certified reference materials of composition of substances and materials. Procedure for interlaboratory certification 03.120.20
17.020
00008-0532 2002   GOST 8.532-2002 State system for ensuring the uniformity of measurements. Certified reference materials of composition of substances and materials. Interlaboratory metrological certification. Content and order of works 17.020
00008-0547 1986   GOST 8.547-86 State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means measuring relative humidity of gases 17.020
00008-0548 1986   GOST 8.548-86 State system for ensuring the uniformity of measurements. Clock-type dial indicators graduated in unit divisions of 0,01mm. Procedure of verification 17.040.30
17.020
00008-0552 2001   GOST 8.552-2001 State system for ensuring the uniformity of measurements. State verification scheme for instruments measuring the radiant flux and irradiance in spectral range from 0.03 to 0.40 mcm 17.020
00008-0553 1988   GOST 8.553-88 State system for ensuring the uniformity of measurements. Electronic octave and third-octave filters. Methods and means of calibration 17.020
31.160
00008-0556 1991   GOST 8.556-91 State system for ensuring the uniformity of measurements. Methods of determination of waters samples composition and properties. General riquirements for development 17.020
13.060
00008-0559 1994   GOST R 8.559-94 State system for ensuring the uniformity of measurements. Measuring lasers. Method for verification 31.260
17.020
00008-0561 1995   GOST R 8.561-95 State system of ensuring the uniformity of measurements. Metrological ensuring of bank technologies. General principles 17.020
35.240.40
00008-0562 1997 GOST 8.562-97 [withdrawn]
State system for ensuring the uniformity of measurements. State verification schedule for means measuring seismic displacement, seismic velocity, seismic acceleration over the frequency range from 0,01-20 Hz
17.020
07.060
00008-0562 2007 GOST R 8.562-2007 State system for ensuring the uniformity of measurements. State verification schedule for means measuring the power and voltage of electromagnetic waves 17.020
00008-0563 1996   GOST R 8.563-96 State system for ensuring the uniformity of measurements. Procedures of measurements 17.020
00008-0565 1996   GOST R 8.565-96 State system for ensuring the uniformity of measurements. Metrological ensuring of atomic power stations exploitation. General principles 17.020
27.120.20
00008-0565 1999   GOST 8.565-99 State system for ensuring the uniformity of measurements. Order of setting up and correcting calibration intervals for standards 17.020
00008-0566 1999   GOST 8.566-99 Staty system for ensuring the uniformity of measurements. Interstate data system on physical constants and properties of substances and materials. General statesments 17.020
00008-0568 1997   GOST R 8.568-97 State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles 03.120.20
17.020
00008-0568 1999   GOST 8.568-99 State system for ensuring the uniformity of measurements. Standard platinum resistance thermometers of the first and second grades. Methods of calibration 17.020
00008-0570 2000   GOST 8.570-2000 State system for ensuring the uniformity of measurements. Steel vertical cylindric tanks. Calibration methods 17.020
75.180.30
00008-0571 1998   GOST R 8.571-98 State system for ensuring the uniformity of measurements. Standard platinum resistance thermometers of the first and second grades. Methods of calibration 17.020
00008-0576 2001   GOST 8.576-2001 State system for ensuring the uniformity of measurements. State verification schedule for means measuring flux, flux density and fluence of electrons, energy flux, energy flux density and fluence of energy of electrons and bremsstrahlung radiation 17.020
00008-0578 2002   GOST 8.578-2002 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring the content of components in gaseous media 17.020
00008-0579 2001   GOST R 8.579-2001 State system for ensuring the uniformity of measurements. Requirements established for the quantity of prepackaged goods in packages of any kind during their manufacturing, packaging, selling or importing 17.020
00008-0579 2002   GOST 8.579-2002 State system for ensuring the uniformity of measurements. Requirements established for the quantity of prepackaged goods in packages of any kind during their manufacturing, packaging, selling or importing 17.020
00008-0580 2001   GOST R 8.580-2001 State system for ensuring the uniformity of measurements. Determination and application of precision data in relation to petroleum products tests methods 17.020
00008-0581 2001   GOST R 8.581-2001 State system for ensuring the uniformity of measurements. Air-heat installations for measuring moisture of cereals and cereal products. Verification procedure 17.020
00008-0581 2003   GOST 8.581-2003 State system for ensuring the uniformity of measurements. Standard radiometric sources of alpha-radiation. Verification procedure 17.020
00008-0582 2001   GOST R 8.582-2001 State system for ensuring the uniformity of measurements. NMR-analyzers for determination of oiliness and moisture of agricultural materials. Verification procedures 17.020
00008-0582 2003   GOST 8.582-2003 State system for ensuring the uniformity of measurements. Standard radiometric sources of beta-radiation. Verification procedure 17.020
00008-0583 2001   GOST R 8.583-2001 State system for ensuring the uniformity of measurements. Medical ultrasonic therapeutic equipment. General requirements for measurement procedures of the acoustic output performance in the frequency range from 0,5 MHz to 5,0 MHz 17.020
11.040.60
00008-0584 2004   GOST 8.584-2004 State system for ensuring the uniformity of measurements. Alternating current static meters for active energy. Methods of verification 17.020
00008-0585 2001   GOST R 8.585-2001 State system for ensuring the uniformity of measurements. Thermocouples. Nominal static characteristics of conversion 17.020
00008-0585 2005   GOST 8.585-2005 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of length and time of propagation in fiber, average power, attenuation and wavelength for system of fider-optic transmission and of data transmission 17.020
00008-0586 2001   GOST R 8.586-2001 State system for ensuring the uniformity of measurements. Instruments measuring the characteristics of artificial and natural radiation for the safety of museum exhibits. Methods for verification 17.020
17.240
00008-0587 2001   GOST R 8.587-2001 State system for ensuring the uniformity of measurements. Instruments measuring the characteristics of optical radiation of solar simulators. Methods for verification 17.020
17.240
00008-0588 2001   GOST R 8.588-2001 State system for ensuring the uniformity of measurements. Ultraviolet radiometers for ozone monitoring. Methods for verification 17.020
17.240
00008-0589 2001   GOST R 8.589-2001 State system for ensuring the uniformity of measurements. Control of nature environment soiling. Metrological ensuring. General principles 17.020
13.020
00008-0590 2001   GOST R 8.590-2001 State system for ensuring the uniformity of measurements. Instruments measuring the characteristics of ultraviolet radiation in labour safety. Methods for verification 17.020
17.240
00008-0591 2002   GOST R 8.591-2002 State system for ensuring the uniformity of measurements. Two channel heat meters for water heat supply systems. Standardization of admitted error limits in measurements of the used thermal energy by users 17.020
17.200.10
00008-0592 2002   GOST R 8.592-2002 State system for ensuring the uniformity of measurements. Thermal energy, received by users in water heat supply system. Typical procedure of measurements 17.200.10
27.010
17.020
00008-0593 2002   GOST R 8.593-2002 State system for ensuring the uniformity of measurements. Infrared analysers of grain and forage. Verification procedure 17.020
17.180.30
00008-0594 2002   GOST R 8.594-2002 State system for ensuring the uniformity of measurements. The metrological ensuring of radiation control. General principles 17.020
17.240
00008-0595 2002   GOST R 8.595-2002 [withdrawn => GOST R 8.595-2004]
State system for ensuring the uniformity of measurements. Mass of petroleum and petroleum products. General requirements to procedures of measurements
17.020
00008-0595 2004   GOST R 8.595-2004 State system for ensuring the uniformity of measurements. Mass of petroleum and petroleum products. General requirements for procedures of measurements 17.020
00008-0596 2002   GOST R 8.596-2002 State system for ensuring the uniformity of measurements. Metrological assurance for measuring systems. Main principles 17.020
00008-0597 2003   GOST R 8.597-2003 State system of insuring the uniformity of measurements. Coaxial loads. Method of verification 17.020
00008-0598 2003   GOST R 8.598-2003 State system for ensuring the uniformity of measurements. Weighbridges for weighing of cinder vehicles in motion. Verification procedure 17.020
17.060
00008-0599 2003   GOST R 8.599-2003 State system for ensuring the uniformity of measurements. Density and volume of oil. The tables of factots for recalculation of density and mass 17.020
00008-0600 2003   GOST R 8.600-2003 State system for ensuring the uniformity of measurements. Procedures of measurement of mass fraction of the parent substance of reagents and superpure substances by titrimetric methods. General requirements 17.020
00008-0601 2003   GOST R 8.601-2003 State system for ensuring the uniformity of measurements. Pressure of saturated steams of crude oil and products from oil. Measurement procedure 17.020
00008-0603 2003   GOST R 8.603-2003 State system for ensuring the uniformity of measurements. Weighbridges for weighing of road vehicles in motion. Verification procedure 17.020
17.060
00008-0604 2004   GOST R 8.604-2004 State system for ensuring the uniformity of measurements. Medical diagnostic ultrasonic equipment. Portable foetal heartbeat detectors. General requirements for the declaration of parameters and measurement methods 17.020
00008-0605 2004   GOST R 8.605-2004 State system for ensuring the uniformity of measurements. Medical diagnostic ultrasonic equipment. General requirements for the measurement methods of continuous-wave doppler equipment 17.020
00008-0606 2004   GOST R 8.606-2004 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of aerosols, suspensions and powdery materials 17.020
00008-0607 2004   GOST R 8.607-2004 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of the frequency deviation 17.020
00008-0608 2004   GOST R 8.608-2004 State system for ensuring the uniformity of measurements. Mountings for verification of instruments measuring the expenditure and volume of water by calibrating with transformers (meters) of expenditure and (or) volume of water. General metrological and technical requirements 17.020
00008-0609 2004   GOST R 8.609-2004 State system for ensuring the uniformity of measurements. Certified reference materials of state accounting and control of nuclear materials system. Basic principles 17.020
00008-0610 2004   GOST R 8.610-2004 State system for ensuring the uniformity of measurements. Density of oil. The tables for recalculation 17.020
00008-0611 2005   GOST R 8.611-2005 State system for ensuring the uniformity of measurements. Standard thermoelectric converters platinumrhodium/platinum and platinumrhodium/platinumrhodium of the first, second and third grades. Verification procedure 17.020
00008-0612   GOST R 8.612-2005 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring the surface density of coating in the range from 0,001 to 1,000 kg/sq m 17.020
00008-0613 2005   GOST R 8.613-2005 State system for ensuring the uniformity of measurements. Procedures for quantitative chemical analysis of water samples. General requirements for development 17.020
00008-0614 2005   GOST R 8.614-2005 State system for ensuring the uniformity of measurements. State service of standard reference data. Basic statements 17.020
00008-0615 2005   GOST R 8.615-2005 State system for ensuring the uniformity of measurements. The measuring of quantity of taken from bowels oil and oil gas. General metrological and technical requirements 17.020
00008-0616 2006   GOST R 8.616-2006 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring ultrasound power in water within the frequency range from 0,5 to 12 MHz 17.020
00008-0617 2006   GOST R 8.617-2006 State system for ensuring the uniformity of measurements. State verification schedule for means measuring the power of electromagnetic waves within the frequency range from 37,50 to 53,57 GHz 17.020
00008-0618 2006   GOST R 8.618-2006 State system for ensuring the uniformity of measurements. State verification schedule for means measuring volume and mass flow of gas 17.020
00008-0620 2006   GOST R 8.620-2006 State system for ensuring the uniformity of measurements. Oilseeds and oilseed residues. Determination of oil and moisture content using pulsed nuclear magnetic resonance method 17.020
67.200
00008-0621 2006   GOST R 8.621-2006 State system for ensuring the uniformity of measurements. Building materials and products. Moisture and heat conduction measurement procedure by the dielcometric method 17.020
00008-0627 2007 GOST R 8.627-2007 State system for еnsuring the uniformity of measurements. Measurements of coefficients of regular and diffuse transmittance of ultraviolet radiation. Methods for measurements 17.020
00008-0632 2007 GOST R 8.632-2007 State system of ensuring the uniformity of measurements. Metrological ensuring of the chemical weapons destruction. Main principles 17.020
00008-0637 2007 GOST R 8.637-2007 State system for ensuring the uniformity of measurements. Certified reference materials for metrological maintenance of pipeline non-destructive testing equipment. General requirements 17.020
00008-0639 2008 GOST R 8.639-2008 State system for ensuring the uniformity of measurements. Metrological ensuring of the chemical weapons destruction. Terms and definitions 17.020
00008-0640 2008 GOST R 8.640-2008 State sysem for ensuring the uniformity of measurements. Radiometers of ultraviolet radiation measurements for photolithography technological processes testing. Verification methods 17.020
00008-0641 2008 GOST R 8.641-2008 State sysem for ensuring the iniformity of measurements. State verification scheme for measuring instruments of the water solutions ion content by electrochemical methods (pX measuring instruments) 17.020
00008-0642 2008 GOST R 8.642-2008 State system for ensuring the uniformity of measurements. Metrological maintenance of measuring systems of units of the account of thermal energy. Main principles 17.020
00008-0643 2008 GOST R 8.643-2008 State system for ensuring the uniformity of measurements. Reflectometers for extreme ultraviolet in region 10 - 30 nm. Verification procedure 17.020
00012-00-005 1984   GOST 12.0.005-84 Occupational safety standards system. Metrological support of occupational safety. General 13.100
17.020
00022-02-04 1994   GOST R 22.2.04-94 Safety in emergencies. Technogenal crashes and catastrophes. Metrological assurance of control of the complicated technical systems state. General statements and rules 17.020
13.200
00022-02-04 1997   GOST 22.2.04-97 Safety in emergencies. Technogenal crashes and catastrophes. Metrological assurance of control of the cqmplicated technical systems state. General statements and rules 17.020
13.200
00022-02-05 1994   GOST R 22.2.05-94 Safety in emergencies. Technogenal crashes and catastrophes. Standardized metrological and accuracical characteristies of control means and testing means used in complicated technical systems, forms and procedures of their metrological service. General statements and rules 17.020
13.200
00022-02-05 1997   GOST 22.2.05-97 Safety in emergencies. Technogenal crashes and catastrophes. Standardized metrological and accuracical characteristics of control means and testing means used in complicated technical systems, forms and procedures of their metrological service. General statements and rules 17.020
13.200
02930 1962   GOST 2930-62 Measuring instruments. Characters and signs 17.020
09031 1975   GOST 9031-75 Standardized blocks of hardness. Specifications 19.060
17.020
11859 1966   GOST 11859-66 Harmonic analizers. Methods and means for verification 17.220
17.020
12441 1966   GOST 12441-66 Horisontal length comparators. Methods and means for verification 17.040.30
17.020
12997 1984   GOST 12997-84 State system of industrial devices and means of automatization. General technical requirements 17.020
35.020
25.040.40
13012   GOST 13012-67 Examiners with limb reading. Methods and means of verification 17.020
13591 1968   GOST 13591-68 Potatoprobe weight. Methods and means of verification 17.060
17.020
13675 1968   GOST 13675-68 Butterprobe weight. Methods and means of verification 17.060
17.020
13697 1968   GOST 13697-68 Milk meters. Methods and means of verification 17.060
17.020
13718   GOST 13718-68 Forque (torsional) balances. Methods and means of verification 17.060
17.020
13760 1968   GOST 13760-68 Emanometers type ЭМ-6. Methods and instruments of their calibration 17.240
17.020
13782 1968   GOST 13782-68 General-purpose spring dynamometers. Methods and means of verification 17.100
17.020
13818 1968   GOST 13818-68 Lether thickness area measuring machine. Methods and means for verification 17.040.30
17.020
13844 1968   GOST 13844-68 Technical metallic gauges. Methods and means of verification 17.060
17.020
14017 1968   GOST 14017-68 State system for ensuring the uniformity of measurements. Force-measuring standard machines of 2 grade. Methods and means of verification 17.100
17.020
14894 1969   GOST 14894-69 Thermoelectric standard 2-class and general industry use thermometers for low temperatures. Methods and means of verification 17.200.20
17.020
15031 1969   GOST 15031-69 Contact instruments КПУ-3. Methods and means of verification 17.020
16263 1970   GOST 16263-70 State system for ensuring the uniformity of measurements. Metrology. Terms and definitions 17.020
16863 1971   GOST 16863-71 Measuring generators for frequency range 0,1-35 MHz. Methods and means of verification 17.220.20
17.020
17215 1971   GOST 17215-71 Micrometric hole gauges. Methods and means of verification 17.040.30
17.020
19611 1974   GOST 19611-74 Moisture meters neutron. Types and basic parameters 17.020
21171 1980   GOST 21171-80 Neutron generators. Types and parameters 17.020
21196 1975   GOST 21196-75 Neutron moisture gauges. General technical requirements 17.020
25164 1982   GOST 25164-82 Connections of SSI instruments and devices with external hydraulic and gas lines. Types, basic parameters and dimensions. Technical requirements 17.020
25852 1983   GOST 25852-83 Electric contacs from noble metals and their alloys. Specifications 17.020
29.100.20
25932 1983   GOST 25932-83 Portable radioisotope soil and concrete moisture and density gauges. General specifications 17.020
27384 2002   GOST 27384-2002 Water. Rates of measurement error of characteristics of composition and properties 13.060
17.020
27872 1988   GOST 27872-88 Metrology. Reference materials. Methods of production and calibration of reference materials of rocks and mineral raw materials 71.040.30
17.020
27883 1988   GOST 27883-88 Industrial process measurement and control equipment. Reliability. General requirements and test methods 03.120
17.020
25.040.40
35.240.50
29027 1991   GOST 29027-91 Moisture meters for solid and dry substances. Specifications and testing methods 17.020
50809 1995   GOST R 50809-95 Numbering and metrological ensuring of identification cards for financial settlements 17.020
03.060
52314 2005   GOST R 52314-2005 Standard thermoelectric converters platinumrhodium/platinum and platinumrhodium/platinumrhodium of the first, second and third grades. General technical requirements 17.020
IEC 60126 2001   GOST R IEC 60126-2001 Reference coupler for the measurement hearing aids. Construction requirements 17.140.50
11.180
17.020
IEC 60711 2001   GOST R IEC 60711-2001 Occluded-ear simulator. Technical requirements and test methods 17.140.50
11.180
17.020
IEC 61094-02 2001   GOST R IEC 61094-2-2001 State system for ensuring the uniformity of measurements. Measurement microphones. Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique 17.020
33.160.50
IEC 61094-03 2001   GOST R IEC 61094-3-2001 State system for ensuring the uniformity of measurements. Measurement microphones. Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique 17.020
33.160.50
ISO 05725-01 2002   GOST R ISO 5725-1-2002 Accuracy (trueness and precision) of measurement methods and results. Part 1. General principles and definitions 17.020
ISO 05725-02 2002   GOST R ISO 5725-2-2002 Accuracy (trueness and precision) of measurement methods and results. Part 2. Basic method for the determination of repeatability and reproducibility of a standard measurement method 17.020
ISO 05725-03 2002   GOST R ISO 5725-3-2002 Accuracy (trueness and precision) of measurement methods and results. Part 3. Intermediate measures of the precision of a standard measurement method 17.020
ISO 05725-04 2002   GOST R ISO 5725-4-2002 Accuracy (trueness and precision) of measurement methods and results. Part 4. Basic methods for the determination of the trueness of a standard measurement method 17.020
ISO 05725-05 2002   GOST R ISO 5725-5-2002 Accuracy (trueness and precision) of measurement methods and results. Part 5. Alternative methods for the determination of the precision of a standard measurement method 17.020
ISO 05725-06 2002   GOST R ISO 5725-6-2002 Accuracy (trueness and precision) of measurement methods and results. Part 6. Use in practice of accuracy values 17.020
ISO 06507-01 2007 GOST R ISO 6507-1-2007 Metals and alloys. Vickers hardness test. Part 1. Test method 17.020
17.040 Top 線及び角度の測定
Sort Mk 規格番号 規格名称(英語) 国際規格分類
( ICSコードの説明 )
00004-446 1986   GOST 4.446-86 System of product-quality indices. Measuring means for linear and angular measurements in mechanical engineering. Nomenclature of indices 03.120
17.040.30
00004-447 1986   GOST 4.447-86 Product-quality index system. Optical instruments for linear measurements. Nomenclature of indices 03.120
17.180.30
17.040.30
00004-448 1986   GOST 4.448-86 Product-quality index system. Optical instruments for angular measurements. Nomenclature of indices 03.120
17.180.30
17.040.30
00004-449 1986   GOST 4.449-86 Product-quality index system. Optical instruments for control of surface roughness and quality. Nomenclature of indices 03.120
17.180.30
17.040.30
00008-0016 1981   GOST 8.016-81 State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means measuring plane angle 17.040.30
17.020
00008-0050 1973   GOST 8.050-73 State system for ensuring the uniformity of measurements. Reference conditions for linear and angular measuruments 17.040
00008-0051 1981   GOST 8.051-81 State system for ensuring the uniformity measurements. Permissible errors of measurement of linear dimensions to 500 mm 17.040
00008-0089 1973   GOST 8.089-73 State system for ensuring the uniformity of measurements. Spherometers. Verification methods and means 17.040.30
17.020
00008-0099 1973   GOST 8.099-73 State system for ensuring the uniformity of measurement. Cludicating hole gauges graduated in 0,01mm. Methods and means of verification 17.040.30
17.020
00008-0113 1985   GOST 8.113-85 State system for ensuring the uniformity of measurements. Vernier callipers. Verification methods 17.040.30
17.020
00008-0114 1974   GOST 8.114-74 State system for ensuring the uniformity of measurements. Vertical optical length comparators. Methods an means of verification 17.040.30
17.020
00008-0147 1975   GOST 8.147-75 State system for ensuring the uniformity of measurements. Measurement tool СЦ type for gear whell runout. Verification methods and means 17.040.30
17.020
00008-0163 1975   GOST 8.163-75 State system for ensuring the uniformity of measurement. Depth gauges 17.040.30
17.020
00008-0164 1975   GOST 8.164-75 State system for ensuring the uniformity of measurements. Vernier height gauges. Methods and means for verification 17.040.30
17.020
00008-0165 1975   GOST 8.165-75 State system ensuring the uniformity of measurement. Sine bars. Methods and means for verification 17.040.30
17.020
00008-0171 1975   GOST 8.171-75 State system of ensuring the uniformity of measurements. Actual measures of the surface density for radiation thickness gauges. General specifications 17.040.30
17.040.20
00008-0181 1976   GOST 8.181-76 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring of evolvent surfaces's parameters 17.040.30
17.020
00008-0211 1984   GOST 8.211-84 State system for ensuring the uniformity of measurements. Ocular screw micrometer. Methods and means of verification 17.040.30
17.020
00008-0224 1976   GOST 8.224-76 State system for ensuring the uniformity of measurements. High-pressure-air ganging instuments of flowmeter type. Methods and means of verification 17.040.30
00008-0235 1977   GOST 8.235-77 State system for ensuring the uniformity of measurements. Measuring rack wheels. Methods and means of verification 17.040.30
00008-0236 1977   GOST 8.236-77 State system for ensuring the uniformity of measurements. Measuring knives. Methods and means of verification 17.040.30
00008-0260 1977   GOST 8.260-77 State system for ensuring the uniformity of measurements. Measuring lever-toothed gear heads. Procedure of verification 17.040.30
00008-0266 1977   GOST 8.266-77 State system for ensuring the uniformity of measurements. Goniometers. Methods and means of verification 17.040.30
00008-0296 1978   GOST 8.296-78 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for instruments measuring surface roughness parameters Rmax and Rz in range 0,025 - 1600 mkm 17.040.30
00008-0307 1978   GOST 8.307-78 State system for ensuring the uniformity of measurements. Reference gauge blocks of 3rd, 4th and 5th accurasy order and working gauge blocks of 1-5 accurasy classes from 125 to 1000mm. Methods and means for verification 17.040
00008-0321 1978   GOST 8.321-78 State system for ensuring the uniformity of measurements. Industrial applicato level gauges and float-type level gauges. Methods and means of calibration 17.040.30
00008-0336 1978   GOST 8.336-78 State system for ensuring the uniformity of measurements. ИЗМ type optical mechanical length measuring machines. Methods and means of calibration 17.180.30
17.040.30
00008-0341 1979   GOST 8.341-79 State system for ensuring the uniformity of measurements. Low-pressure pneumatic length gages. Methods and means for verification 17.040.30
00008-0342 1979   GOST 8.342-79 State system for ensuring the uniformity of measurements. Hole gauges graduated in 0,001 and 0,002mm. Methods and means of verifcation 17.040.30
00008-0345 1979   GOST 8.345-79 State system for ensuring the uniformity of measurements. Control bars. Methods and means of verification 17.040.30
00008-0351 1979   GOST 8.351-79 State system for ensuring the uniformity of measurements. Slotted lines. Methods and means for verification 17.040.30
00008-0353 1979   GOST 8.353-79 State system for ensuring the uniformity of measurements. Standard rigid length measures of the olst accuracy order and working length measures of the 0 accuracy class to 1 m. Methods and means for verificatton 17.040
00008-0353 1996   GOST 8.353-96 State system for ensuring the uniformity of measurements. Standard line measures of length of the first grade and working line measures of the zero accuracy class to 1 m length. Method for verification 17.040.30
00008-0359 1979   GOST 8.359-79 State system for ensuring the uniformity of measurements. Gangs callipers with reading arrangement. Methods and means for verification 17.040.30
00008-0362 1979   GOST 8.362-79 State system for ensuring the uniformity of measurement. Coating thickness measurement. Terms and definitions 17.040
01.040.17
00008-0367 1979   GOST 8.367-79 State system for ensuring the uniformity of measurments. Reference gauge-blocks оf the 1st and the 2nd accuracy orders and working gauge-blocks of 00 and 0 accuracy classes up to 1000 mm. Methods and means for verification 17.040.30
00008-0376 1980   GOST 8.376-80 State system for ensuring the uniformity of measurements. Universal instruments for measuring cvolvents. Methods and means of verification 17.040.30
00008-0411 1981   GOST 8.411-81 State system for ensuring the uniformity of measurements. Lever microme ters. Rules and procedure of verification 17.040.30
00008-0420 1981   GOST 8.420-81 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means of measuring straightness and flatness deviation 17.040.30
00008-0420 2002   GOST 8.420-2002 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring straightness and flatness deviation 17.020
17.040
00008-0459 1982   GOST 8.459-82 State system for ensuring the uniformity of measurements. Pitch diference measuring instruments. Methods and means of verification 17.040.30
00008-0471 1982   GOST 8.471-82 State system for ensuring the uniformity of measurements. Machines for textile web lengths measuring. Methods and means of verification 17.040.30
00008-0481 1982   GOST 8.481-82 State system for ensuring the uniformity of measurements. Roundness measuring instruments. Methods and means for verification 17.040.30
00008-0490 1983   GOST 8.490-83 State system for ensuring the uniformity of measurements. Instruments for measurements of gear interaxial distance. Methods of verification 17.040.30
00008-0491 1983   GOST 8.491-83 State system for ensuring the uniformity of measurements. Electrocontact converters for checking linear dimensions. Methods and means of verification 17.220.20
17.040.30
00008-0495 1983   GOST 8.495-83 State system for ensuring the uniformity of measurements. Ultrasonic contact-type instruments for measurement of thickness. Verification methods and means 17.040.30
00008-0502 1984   GOST 8.502-84 State system for ensuring the uniformity of measurments. Coating thickness gauges. Verification methods and means 17.040.30
00008-0503 1984   GOST 8.503-84 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring length within the range of 24-75000 m 17.040.30
00008-0506 1984   GOST 8.506-84 State system for ensuring the uniformity of measurements. Convex spherical mirrors. Measurement technique of curvature radius and local departures of surfaces forms from sphericity by holographic shear interferometry 17.040.30
00008-0528 1985   GOST 8.528-85 State system for ensuring the uniformity of measurements. Second class reference line gauges and fifth accuracy class working line gauges. Verification procedure 17.040.30
00008-0543 1986   GOST 8.543-86 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring deformation 17.040.30
00008-0548 1986   GOST 8.548-86 State system for ensuring the uniformity of measurements. Clock-type dial indicators graduated in unit divisions of 0,01mm. Procedure of verification 17.040.30
17.020
00008-0549 1986   GOST 8.549-86 The state system of ensuring the uniformity of measurements. Permissible errors of measurement of linear dimensians to 500 mm with unindicated tolerances 17.040
00008-0628 2007 GOST R 8.628-2007 State system for ensuring the uniformity of measurements. Single-crystal silicon nanometer range relief measures. Requirements for geometrical shapes, linear sizes and manufacturing material selection 17.040.01
00008-0629 2007 GOST R 8.629-2007 State system for ensuring the uniformity of measurements. Nanometer range relief measures with trapezoidal profile of elements. Methods for verification 17.040.01
00008-0630 2007 GOST R 8.630-2007 State system for ensuring the uniformity of measurements. Atomic-force scanning probe measuring microscopes. Methods for verification 17.040.01
00008-0631 2007 GOST R 8.631-2007 State system for ensuring the uniformity of measurements. Scanning electron measuring microscopes. Methods for verification 17.040.01
00008-0635 2007 GOST R 8.635-2007 State system for ensuring the unifоrmity of measuremеnts. Atomic-forсe scanning probe microscopes. Method for calibration 17.040.01
00008-0636 2007 GOST R 8.636-2007 State system for ensuring the unifоrmity of measuremеnts. Scanning electron microscopes. Methods for calibration 17.040.01
00008-0644 2008 GOST R 8.644-2008 State system for ensuring the uniformity of measurements. Nanometer range relief measure with trapezoidal profile of elements. Method for calibration 17.040.01
00010 1988   GOST 10-88 Inside micrometers. Specifications 17.040.30
00162 1990   GOST 162-90 Depth gauges. Specifications 17.040.30
00164 1990   GOST 164-90 Vernier height gauges. Specifications 17.040.30
00166   GOST 166-89 Vernier callipers. Specifications 17.040.30
00300   GOST 300-69 Curvemeters 17.040.30
00427 1975   GOST 427-75 Measurihg metal rules. Basic parameters and dimensions. Technical requirements 17.040.30
00577 1968   GOST 577-68 Clock-type dial indicators graduated in unit divisions of 0,01 mm. Specifications 17.040.30
00868 1982   GOST 868-82 Internal dial gauges graduated in 0,01 mm. Specifications 17.040.30
01623 1989   GOST 1623-89 Gauges for inch thread with 55 degree corner profile. Tolerances 17.040.30
02015 1984   GOST 2015-84 Fixed plain gauges. Technical requirements 17.040.30
02016 1986   GOST 2016-86 Thread gauges. Specifications 17.040.30
02216 1984   GOST 2216-84 Adjustable plain snap gauges. Specifications 17.040.30
02386 1973   GOST 2386-73 Level vials. Specifications 17.040.30
02475 1988   GOST 2475-88 Wires and rolls. Specifications 17.040.30
02533 1988   GOST 2533-88 Gauges for staight pipe thread. Tolerances 17.040.30
02534 1967   GOST 2534-67 Height and depth limit gauges. Tolerances 17.040.30
02534 1977   GOST 2534-77 Height and depth limit gauges. Tolerances 17.040.30
02689 1954   GOST 2689-54 Tolerances and fits of dimensions over 500 to 10000 mm 21.020
17.040.10
02849 1977   GOST 2849-77 Gauges for bevels of instruments. Basic dimensions and tolerances. Technical requirements 17.040.30
02849 1994   GOST 2849-94 Gauges for bevets of instruments. Specifications 17.040.30
02875 1988   GOST 2875-88 Plane-angle standards of the prism type. General specifications 17.040.30
03047 1966   GOST 3047-66 Tolerances and fits in dimensions less than 1 mm 21.020
17.040.10
03199 1984   GOST 3199-84 Serew gauges for metric screw thread of diameters less than 1 mm. Tolerances 17.040.30
03749 1977   GOST 3749-77 Checking 90 degree C squares. Specifications 17.040.30
03899 1981   GOST 3899-81 Transducers with electric contacts for control of linear dimensions. Specifications 17.040.30
04046 1980   GOST 4046-80 Sine bars. Specifications 17.040.30
04119 1976   GOST 4119-76 Accessories sets for plane-parallel end measures of length. Main parameters and dimensions. Specifications 17.040.30
04380 1993   GOST 4380-93 Micrometers with inserts. Specifications 17.040.30
04381 1987   GOST 4381-87 Lever-type micrometers. General specifications 17.040.30
05368 1981   GOST 5368-81 Cylindrical gear checking machines. Types. Basic parameters. Accuracy limits 17.040.30
05378 1988   GOST 5378-88 Vernier protractors. Specifications 17.040.30
05584 1975   GOST 5584-75 Lever-toothed indicators graduated in 0,01 mm. Specifications 17.040.30
05939   GOST 5939-51 [?] 17.040.30
06485 1969   GOST 6485-69 Gauges for inch taper thread with 60 corner profile. Types. Basic dimensions and tolerances 17.040.30
06507 1990   GOST 6507-90 Micrometers. Specifications 17.040.30
06512 1974   GOST 6512-74 Metering spur gears. Specifications 17.040.30
06528 1953   GOST 6528-53 Gauges for splined shaft and holes with evolute profile. Tolerances 17.040.30
06636 1969   GOST 6636-69 Standard linear dimensions 17.040
21.020
07013 1967   GOST 7013-67 Measuring knives 17.040.30
07157 1979   GOST 7157-79 Gauges for pine taper thread. Types. Basic dimensions and tolerances 17.040.30
07470 1992   GOST 7470-92 Micrometric depthometers. Specifications 17.040.30
07502 1989   GOST 7502-89 [withdrawn]
Measuring metal tapes. Specifications
17.040.30
07502 1998   GOST 7502-98 Measuring metal tapes. Specifications 17.040.30
07660   GOST 7660-55 [?] 17.040.30
07661 1967   GOST 7661-67 Dial depth gauges. Specifications 17.040.30
07713 1962   GOST 7713-62 Limits and fits. Basic definitions 21.020
17.040.10
07951 1980   GOST 7951-80 Geuges for checking of straight splined joints. Tolerances 17.040.30
08026 1992   GOST 8026-92 Levelling rules. Specifications 17.040.30
08517 1990   GOST 8517-90 Means of automation for grindling. General specifications 17.040.30
08593 1981   GOST 8593-81 Basic norms of interchangeabihty. Standart rates of taper and cone angles 17.040
21.020
08809 1971   GOST 8809-71 Limits and fits of dimension less than 0,1 min 21.020
17.040.10
08867 1989   GOST 8867-89 Gauges for tool joints thread. Types. Basic dimensions and tolerances 17.040.30
08898 1978   GOST 8898-78 Step-bearing for measuring instruments. General specifications 17.040.30
09038 1990   GOST 9038-90 Gauge blocks. Specifications 17.040.30
09244 1975   GOST 9244-75 Inside callipers graduated in 0,001 and 0,002 mm. Basic parameters. Technical requirements 17.040.30
09378 1975   GOST 9378-75 Surface roughness comparison specimens. Technical requirements 17.040.20
09378 1993   GOST 9378-93 Roughness comparison specimens. General specifications 17.040.20
09392 1989   GOST 9392-89 Levelling squares and bars. Specifications 17.040.30
09459 1987   GOST 9459-87 Gauges for bevel gears and gear pairs. Types. Basic parameters. Accuracy limits 17.040.30
09696 1982   GOST 9696-82 Multi-revolution dial indicators graduated in 0,001 and 0,002 mm. Types. Basic parameters. Specifications 17.040.30
09776 1982   GOST 9776-82 Gauges for worms, worm wheels and worm wheel drives. Types and dimensions. Precision standard 17.040.30
10071 1989   GOST 10071-89 Gauges for trapezoidal tread. Tolerances 17.040.30
10197 1970   GOST 10197-70 Stands and supports for measuring heads. Specifications 17.040.30
10278 1981   GOST 10278-81 Gages for buttress thread. Tolerances 17.040.30
10387 1981   GOST 10387-81 Measuring machines for checking fine pitch spur gears. Types. Basic dimensions, standards of accuracy 17.040.30
10653 1984   GOST 10653-84 Gauges for triangular thread of internal-external upset drill pipes with coup lings. Types, basic dimensions and tolerances 17.040.30
10654 1981   GOST 10654-81 Gauges for triangular thread for tubing pipes with couplings. Types. Basic dimensions and tolerances 17.040.30
10655 1981   GOST 10655-81 Gauges for triangular thread for casing pipes with couplings. Types. Basic dimensions and tolerances 17.040.30
10905 1986   GOST 10905-86 Surface plates and face-plates. Specifications 17.040.30
10908 1975   GOST 10908-75 Mechanical quadrants with level. Specifications 17.040.30
11007 1966   GOST 11007-66 Measuring tips of apparatuses for linear measurements. Specifications 17.040.30
11098 1975   GOST 11098-75 Gauge callipers with reading arrangement. Specifications 17.040.30
11196 1974   GOST 11196-74 Levels with micrometrical feed of ampule. Specifications 17.040.30
11357 1989   GOST 11357-89 Fine-modul bevel gear testers. Types and main specifications. Accuracy norms 17.040.30
11358 1989   GOST 11358-89 Dial-type thickness gauges and dial type wall thickness gauges graduated in 0,01 and 0,1 mm. Specifications 17.040.30
11472 1969   GOST 11472-69 Limits and fits. Grades of tolerance 02-09 21.020
17.040.10
11710 1966   GOST 11710-66 Limits and fits for the parts of plastics 21.020
17.040.10
12069 1990   GOST 12069-90 Line measures squared of length. Specifications 17.040.30
12441 1966   GOST 12441-66 Horisontal length comparators. Methods and means for verification 17.040.30
17.020
13494 1980   GOST 13494-80 Geodetical protector. Specifications 17.040.30
07.040
13762 1986   GOST 13762-86 Measuring means for linear and angular measurements. Marking, packing, transporting and storage 17.040.30
13798 1968   GOST 13798-68 Gauges for round screw thread of 12 mm diameters. Basic dimensions and tolerances 17.040.30
13810 1968   GOST 13810-68 Plain gauges for dimensions over 500 mm. Tolerances 17.040.30
13818 1968   GOST 13818-68 Lether thickness area measuring machine. Methods and means for verification 17.040.30
17.020
14025 1984   GOST 14025-84 Limit gauges in woodworking. Tole rances 17.040.30
14747 1988   GOST 14747-88 Gauges for buttress strengthened thread. Tolerances 17.040.30
14748 1969   GOST 14748-69 Cylindrical and hexahedral handles for plug-gauges. Design and dimensions 17.040.30
14749 1969   GOST 14749-69 Snigle-ended handles for ganging members. Design and dimensions 17.040.30
14750 1969   GOST 14750-69 Plastic single-ended handles for ganging members. Design and dimensions 17.040.30
14751 1969   GOST 14751-69 Cover handles for plain incomplete plug-gauges. Design and dimensions 17.040.30
14752 1969   GOST 14752-69 Handles for spherical inside gauges. Design and dimensions 17.040.30
14807 1969   GOST 14807-69 Plain double-end plug gauges with inserts of diameter from 1 to 6 mm. Design and dimensions 17.040.30
14808 1969   GOST 14808-69 Go plain plug gauges with inserts of diameter from 1 to 6 mm. Design and dimensions 17.040.30
14809 1969   GOST 14809-69 No-go plain plug gauges with inserts of diameter from 1 to 6 mm. Design and dimensions 17.040.30
14810 1969   GOST 14810-69 Plain double-end plug gauges with inserts of diameter over 3 to 50 mm. Design and dimensions 17.040.30
14811 1969   GOST 14811-69 Plain double-plug gauges with no-go inserts of not full-from with diameter from 6 to 50 mm. Design and dimensions 17.040.30
14812 1969   GOST 14812-69 Go plain plug gauges with inserts of diameter over 50 to 75 mm. Design and dimensions 17.040.30
14813 1969   GOST 14813-69 No-go plain plug gauges with inserts of diameter over 50 to 75 mm. Design and dimensions 17.040.30
14814 1969   GOST 14814-69 No-go plain plug gauges with inserts of not full-form with diameter over 50 to 75 mm. Design and dimensions 17.040.30
14815 1969   GOST 14815-69 Go plain plug gauges with headpieces of diameter over 50 to 100 mm. Design and dimensions 17.040.30
14816 1969   GOST 14816-69 No-go plain plug gauges with headpieces of diameter over 50 to 100 mm. Design and dimensions 17.040.30
14817 1969   GOST 14817-69 Stamped go plain plug gauges with headpieces of diameter over 50 to 100 mm. Design and dimensions 17.040.30
14818 1969   GOST 14818-69 Stamped no-go plain plug gauges with headpieces of diameter over 50 to 100 mm. Design and dimensions 17.040.30
14819 1969   GOST 14819-69 No-go plain plug gauges with headpieces of not full-form with diameter from 50 to 100 mm. Design and dimensions 17.040.30
14820 1969   GOST 14820-69 Stamped go plain plug gauges of not full-form with diameter over 100 to 160 mm. Design and dimensions 17.040.30
14821 1969   GOST 14821-69 Stamped no-go plain plug gauges of not full-form with diameter over 75 to 160 mm. Design and dimensions 17.040.30
14822 1969   GOST 14822-69 Go plain plug gauges of not full-form with diameter over 100 to 300 mm. Design and dimensions 17.040.30
14823 1969   GOST 14823-69 No-go plain plug gauges of not full-form with diameter over 75 to 300 mm. Design and dimensions 17.040.30
14824 1969   GOST 14824-69 Go plain plug gauges of not full-form with laps of diameter over 160 to 300 mm. Design and dimensions 17.040.30
14825 1969   GOST 14825-69 No-go plain plug gauges of not full-form with laps of diameter over 160 to 360 mm. Design and dimensions 17.040.30
14826 1969   GOST 14826-69 Sheet plain single-end plug gauges with diameter over 50 to 250 mm. Design and dimensions 17.040.30
14827 1969   GOST 14827-69 No-go ball plug gauges with diameter over 100 to 360 mm. Design and dimensions 17.040.30
14864 1978   GOST 14864-78 Pneumatic plug gauges from 3 to 160 mm. Specifications 17.040.30
14865 1978   GOST 14865-78 Setting rings for internal measuring instruments. Specifications 17.040.30
15593 1970   GOST 15593-70 Indication. Gange heads and transducers. Connected sizes 17.040.30
15876 1990   GOST 15876-90 Cauges for wood and wood material wares. Specifications 17.040.30
15900 1985   GOST 15900-85 Sorting photoelectrical transducers. Specifications 17.040.30
15982 1970   GOST 15982-70 Levels with micrometrical feed of ampule. Methods and means of veritification 17.040.30
15988 1980   GOST 15988-80 Bevel and hypoid gears running testers. Basic dimensions 17.040.30
16085 1980   GOST 16085-80 Gauges for checking position of surfaces. Tolerances 17.040.30
16473 1980   GOST 16473-80 Bevel and hypoid running testers. Standards of accuracy 17.040.30
16775 1993   GOST 16775-93 Plain snap-gauges with cemented carbide alloy plates for diameters from 3 to 180 mm. Dimensions 17.040.30
16778 1993   GOST 16778-93 Plain plug gauges with cemented carbide alloy for diameters from 1 to 6 mm. Dimensions 17.040.30
16780 1971   GOST 16780-71 Plain double ended plugs gauges with insert ПР and ring of cemented carbide with diameters from 6,3 to 50 mm nominal diameter. Design and dimensions 17.040.30
17215 1971   GOST 17215-71 Micrometric hole gauges. Methods and means of verification 17.040.30
17.020
17320 1971   GOST 17320-71 State system for ensuring the uniformity of measurements. Plain gauges for dimensions over 500 mm. Verification methods and means 17.040.30
17336 1980   GOST 17336-80 Gauges for hebbing cutters. Types and basic parameters. General technical requirements 17.040.30
17353 1989   GOST 17353-89 Instruments for measurements of form and position deviations of surfaces of revolution. Types. General technical requirements 17.040.30
17381 1984   GOST 17381-84 Gauges for buttress thread. Required dimensions 17.040.30
17736 1972   GOST 17736-72 Double-ended plain plug gauges with split bushes and inserts from 0,10 up to 0,95 mm nominal diameter. Design and dimensions 17.040.30
17737 1972   GOST 17737-72 Double-ended plain plug-gauges with inset inserts from 0,30 up to 0,95 mm nominal diameter. Design and dimensions 17.040.30
17738 1972   GOST 17738-72 Plain plug-gauges (go side) with inserts of diameter from 0,30 up to 0,95 mm. Design and dimensions 17.040.30
17739 1972   GOST 17739-72 Plain plug-gauges (not go side) with inserts of diameter from 0,30 up to 0,95 mm. Design and dimensions 17.040.30
17740 1972   GOST 17740-72 Double-ended plain plug-gauges with inserts of diameter from 0,30 up to 0,95mm. Design and dimensions 17.040.30
17741 1972   GOST 17741-72 Double-ended handles for plain plug-gauges with split bushes. Design and basic dimensions 17.040.30
17742 1972   GOST 17742-72 Double-ended handles for plain plug-gauges with inset inserts from 1 mm nominal diameter. Design and dimensions 17.040.30
17756 1972   GOST 17756-72 Threaded plug-gauges with inserts with full-form of thread of diameters from 1 to 100 mm. Design and basic dimensions 17.040.30
17757 1972   GOST 17757-72 Threaded plug-gauges with inserts with incomplete form of thread of diameters from 1 to 100 mm. Design and basic dimensions 17.040.30
17758 1972   GOST 17758-72 Double-ended threaded plug-gauges with inserts of diameters from 2 to 50 mm. Design and basic dimensions 17.040.30
17759 1972   GOST 17759-72 Threaded plug-gauges with full form of thread of diameters from 52 to 100 mm. Design and basic dimensions 17.040.30
17760 1972   GOST 17760-72 Threaded plug-gauges with incomplete form of thread of diameters from 52 to 100 mm. Design and basic dimensions 17.040.30
17761 1972   GOST 17761-72 Threaded plug-gauges with full of thread of diameter from 105 to 300 mm. Design and basic dimensions 17.040.30
17762 1972   GOST 17762-72 Threaded plug-gauges with incomplete form of thread of diameters from 105 to 300 mm. Design and basic dimensions 17.040.30
17763 1972   GOST 17763-72 Threaded plug-gauges with full form of thread of diameters from 1 to 100 mm. Design and basic dimensions 17.040.30
17764 1972   GOST 17764-72 Threaded ring-gauges with incomplete form of thread of diameters from 2 to 100 mm. Design and basic dimensions 17.040.30
17765 1972   GOST 17765-72 Threaded ring-gauges with full-form of thread of diameters from 105 to 300 mm. Design and basic dimensions 17.040.30
17766 1972   GOST 17766-72 Threaded ring-gauges with incomplete form of thread of diameters from 105 to 300 mm. Design and basic dimensions 17.040.30
17767 1972   GOST 17767-72 Screw-in handles for plug-gauges and ring-gaugess. Design and basic dimensions 17.040.30
18061 1990   GOST 18061-90 Radiation thickness gauges. General specifications 17.040.30
18355 1973   GOST 18355-73 Plain single-ended double-limit snap gauges for lenght over 10 to 360 mm. Design and dimensions 17.040.30
18356 1973   GOST 18356-73 Plain double-ended snap gauges for lenght over 10 to 360 mm. Design and dimensions 17.040.30
18357 1973   GOST 18357-73 Plain double-ended snap gauges for length over 300 to 500 mm. Design and dimensions 17.040.30
18358 1993   GOST 18358-93 Plain snap-gauges for diameters from 1 to 6 mm. Dimensions 17.040.30
18360 1993   GOST 18360-93 Plate snap-gauges for diameters from 3 to 260 mm. Dimensions 17.040.30
18365 1993   GOST 18365-93 Plate snap-gauges with changeable lips for diameters over 100 to 360 mm. Dimensions 17.040.30
18367 1993   GOST 18367-93 Pressed snap-gauges for diameters over 10 to 180 mm. Dimensions 17.040.30
18369 1973   GOST 18369-73 Cover handles for snap gauges. Desing and dimensions 17.040.30
18465 1973   GOST 18465-73 Gauges for metric thread from 1 to 68 mm. Required dimensions 17.040.30
18466 1973   GOST 18466-73 Gauges for metric thread over 68 to 200 mm. Required dimensions 17.040.30
18833 1973   GOST 18833-73 Lever-gearing measuring heads. Specifications 17.040.30
18922 1973   GOST 18922-73 Screw plug-gauges with full-form inserts for pipe cylindrical threads from 1/16"up to 4" nominal diameter. Construction and basic sizes 17.040.30
18923 1973   GOST 18923-73 Screw plug-gauges with truncated form inserts for pipe cylindrical threads from 1/16 "up to 4" nominal diameter. Construction and basic sizes 17.040.30
18924 1973   GOST 18924-73 Screw double-ended plugs with inserts for pipe cylindrical threads from 1/16 "up to 1 1/2" nominal diameter. Construction and basic sizes 17.040.30
18925 1973   GOST 18925-73 Screw plug-gauges with full form gaging members for pipe cylindrical threads from 1 3/4 "up to 3 3/4" nominal diameter. Construction and basic sizes 17.040.30
18926 1973   GOST 18926-73 Screw plug-gauges with truncated form gaging members for pipe cylindrical thread from 1 3/4"up to 3 3/4" nominal diameter. Construction and basic sizes 17.040.30
18927 1973   GOST 18927-73 Full form screw plug-gauges for pipe cylindrical threads from 4"up to 6" nominal diameter. Construction and basic sizes 17.040.30
18928 1973   GOST 18928-73 Truncated form screw plug-gauges for pipe cylindrical threads from 4" up to 6" nominal diameter. Construction and basic sizes 17.040.30
18929 1973   GOST 18929-73 Full form screw ring-gauges for pipe cylindrical threads from 1/16" up to 3 3/4" nominal diameter. Construction and basic sizes 17.040.30
18930 1973   GOST 18930-73 Truncated form screw ring-gauges for pipe cylindrical threads from 1/16" up to 3 3/4" nominal diameter. Construction and basic sizes 17.040.30
18931 1973   GOST 18931-73 Full form screw ring-gauges for pipe cylindrical threads from 4" up to 6" nominal diameter. Construction and basic sizes 17.040.30
18932 1973   GOST 18932-73 Truncated from screw ring-gauges for pipe cylindrical threads from 4" up to 6" nominal diameter. Construction and basic sizes 17.040.30
18961 1980   GOST 18961-80 Diamond needles for suface roughness measurements. Technical conditions 17.040.30
19300 1986   GOST 19300-86 Instruments for measurement of surface roughness by the profile method. Contact profilographs and profilometers. Types and main parameters 17.040.30
20305 1980   GOST 20305-80 Gauges for tapers 7:24. Basic dimensions and tolerances. Technical requirements 17.040.30
20305 1994   GOST 20305-94 Gauges for tapers 7:24. Specifications 17.040.30
21401 1975   GOST 21401-75 Plain limit gauges for dimensions up to 500 mm. Required dimensions 17.040.30
21524 1976   GOST 21524-76 Round timber. Means for linear and volumetric measurements. Types and basic parameters. Technical requirements 17.040.30
21625 1976   GOST 21625-76 Digital information-measuring mechanism with stream-jet-convertor for measuring linear sizes 17.040.30
22238 1976   GOST 22238-76 Nondestractiv testing. Mesure-reference for thickness gauges of coverings. General principles 17.040.30
22601 1977   GOST 22601-77 Control bars. Specifications 17.040.30
22634 1977   GOST 22634-77 Gauges for connections of drill pipes with stabilizing collars and tool-joints. Specifications 17.040.30
24109 1980   GOST 24109-80 Conges for kuj joints. Tolerances 17.040.30
24110 1980   GOST 24110-80 Key-slotted plug-ganges with diameter from 9 to 18 mm. Design and dimensions 17.040.30
24111 1980   GOST 24111-80 Key-slotted plug-ganges with diameter over 18 to 56 mm. Design and dimensions 17.040.30
24112 1980   GOST 24112-80 Key-slotted plug-ganges with diameter over 56 to 125 mm. Design and dimensions 17.040.30
24113 1980   GOST 24113-80 Key-slotted prism-ganges for shalts with diameter over 8 to 22 mm. Design and dimensions 17.040.30
24114 1980   GOST 24114-80 Key-slotted prism-ganges for shafts with diameter over 22 to 200 mm. Design and dimensions 17.040.30
24115 1980   GOST 24115-80 Keyway depth ganges for holes with diameter from 3 to 10 mm. Design and dimensions 17.040.30
24116 1980   GOST 24116-80 Keyway depth ganges for holes with diameter over 10 to 90 mm. Design and dimensions 17.040.30
24117 1980   GOST 24117-80 Keyway depth ganges for holes with diameter over 90 to 200 mm. Design and dimensions 17.040.30
24118 1980   GOST 24118-80 Keyway depth ganges for shafts with diameter from 6 to 200 mm. Design and dimensions 17.040.30
24119 1980   GOST 24119-80 Keyway depth ganges for segmental key shots. Design and dimensions 17.040.30
24120 1980   GOST 24120-80 Keyway ganges for dimensions from 1 to 3 mm. Design and dimensions 17.040.30
24121 1980   GOST 24121-80 Keyway ganges for dimensions over 3 to 50 mm. Design and dimensions 17.040.30
24314 1980   GOST 24314-80 Electronic measuring instruments. Terms and definitions, methods of expressing errors and general test conditions 01.040.17
17.040.30
24475 1980   GOST 24475-80 Ganges for metric taper thread. Tolerances 17.040.30
24672 1981   GOST 24672-81 Gauges for taper thread. Specifications 17.040.30
24773 1981   GOST 24773-81 Surfaces with regular microshape. Classification, parameters and characteristics 25.220
17.040.20
24851 1981   GOST 24851-81 Plain ganges for cylindrical holes and shalts. Types 17.040.30
24852 1981   GOST 24852-81 Plain ganges for dimensions over 500 to 3150 mm. Tolerances 17.040.30
24853 1981   GOST 24853-81 Plain gauges for dimensions to 500 mm. Tolerances 17.040.30
24932 1981   GOST 24932-81 Ganges for tapered joints. Tolerances 17.040.30
24939 1981   GOST 24939-81 Ganges for parallel threads. Types 17.040.30
24959 1981   GOST 24959-81 Gauges for splined joints. Technical requirements 17.040.30
24960 1981   GOST 24960-81 Complex ganges for splined straightsided joints. Types, basic dimensions 17.040.30
24961 1981   GOST 24961-81 Plate double-end plug ganges with diameter from 14 to 98 mm. Design and dimensions 17.040.30
24962 1981   GOST 24962-81 Go plug ganges of not full form with diameter from 102 to 125 mm. Design and dimensions 17.040.30
24963 1981   GOST 24963-81 Not-go plug ganges of not full form with diameter from 102 to 125 mm. Design and dimensions 17.040.30
24964 1981   GOST 24964-81 Not-go snap-gauges for checking internal diameter of splined shafts with straight-sided profile when centering by D or b. Design and dimensions 17.040.30
24965 1981   GOST 24965-81 Double-end snap-ganges for checking internal diameter of splined shafts with straight-sided profile when centering by d. Design and dimensions 17.040.30
24966 1981   GOST 24966-81 Double-end snap-ganges for checking toth theckness of splined shafts with straight-sided profile. Design and dimensions 17.040.30
24967 1981   GOST 24967-81 Splined ganges for dimensions up to 3 min. Design and dimensions 17.040.30
24968 1981   GOST 24968-81 Splined ganges for dimensions over 3 to 18 mm. Design and dimensions 17.040.30
24969 1981   GOST 24969-81 Gauges for checking 30 deg involute splined joints. Tolerances 17.040.30
24997 1981   GOST 24997-81 [withdrawn => GOST 24997-2004]
Ganges for metric threads. Tolerances
17.040.30
24998 1981   GOST 24998-81 Ganges for tapes threads of valves and gas-bags. Tolerances 17.040.30
25142 1982   GOST 25142-82 Surface roughness. Terms and definitions 01.040.17
17.040.20
25307 1982   GOST 25307-82 Basic norms of interchangeability. Cone joining system of limits and fits 21.020
17.040.10
25346 1989   GOST 25346-89 Basic norms of interchangeability. Unified system of tolerances and fits. General, series of tolerances and fundamental deviations 21.020
17.040.10
25347 1982   GOST 25347-82 Basic norms of interchangebility. Unified system of tolerances and fits. Tolerance zones and recommendable fits 21.020
17.040.10
25348 1982   GOST 25348-82 Basic norms of interchangebility. Unified system of tolerances and fits. Series of tolerances, basic deviations and tolerance zones for sizes over 3150 mm 21.020
17.040.10
25349 1988   GOST 25349-88 Basic norms of interchangeabiliti. Unified sistem of tolerances and fits. Tolerance zones for the plastics parts 21.020
17.040.10
25575 1983   GOST 25575-83 Garuges for trapezaidal thread connections for casing pipes with couplings. Types, basic dimensions and tolerances 17.040.30
25576 1983   GOST 25576-83 Gauges for trapezaidal thread connections for tubing pipes with couplings. Types, basic dimensions and tolerances 17.040.30
25578 1983   GOST 25578-83 Gauges for edisons round thread main dimensions 17.040.30
25670 1983   GOST 25670-83 [withdrawn? => GOST 30893.1-2002]
Basic norms of interchangeability. Limit deviations of dimensions without tolerance indication
21.020
17.040.10
25858 1983   GOST 25858-83 Surface density and thickness measures for radioisotope thickness gauges specifications 17.040.30
26179 1984   GOST 26179-84 Basic norms of interchangeability. Tolerances for sizes above 10000 up to 40000 mm 21.020
17.040.10
27284 1987   GOST 27284-87 Gauge. Terms and definions 01.040.17
17.040.30
27298 1987   GOST 27298-87 Gauges for multy-start trapezoidal thread. Tolerances 17.040.30
27964 1988   GOST 27964-88 Measurement of surface roughness parameters. Terms and definitions 01.040.17
17.040.20
28094 1989   GOST 28094-89 Gauges for tool cir cled tread. Tolerances 17.040.30
28187 1989   GOST 28187-89 Basic norms of interchangeability. Deviations of form and position. General requirements for methods of measurements 17.040
21.020
28725 1990   GOST 28725-90 Instruments for measuring the level of liquids and loose materials. General technical requirements and test methods 17.040.30
28798 1990   GOST 28798-90 Spring measuring heads. General specifications 17.040.30
30534 1997   GOST 30534-97 Means of measurement for linear and angular dimensions. Safety requirements and test methods 17.040.30
30893-01 2002   GOST 30893.1-2002 Basic norms of interchangeability. General tolerances. Limit deviations for linear and angular dimensions without tolerance indications 17.040.10
30893-02 2002   GOST 30893.2-2002 Basic norms of interchangeability. General tolerances. Tolerances of form and position for features without individual tolerance indications 17.040.10
30987 2003   GOST 30987-2003 Basic norms of interchangeability. Dimensioning and tolerancing for non-rigid parts 17.040.10
50056 1992   GOST R 50056-92 Basic norms of interchangeability. Depended tolerances of form, position and coordinating sizes. Bases of application 21.020
17.040.10
50063 1992   GOST R 50063-92 Plain plug gauges, with cemented carbide, for 1 to 6. Dimensions 17.040.30
50064 1992   GOST R 50064-92 Plain snap-gauges with cemented carbide, for 3 to 180. Dimensions 17.040.30
50190 1992   GOST R 50190-92 Micrometers with inserts. Specifications 17.040.30
50285 1992   GOST R 50285-92 Plate snap-gauges for diameters from 1 to 6 mm. Dimensions 17.040.30
50286 1992   GOST R 50286-92 Plate snap-gauges for diameters from 3 to 260 mm. Dimensions 17.040.30
50287 1992   GOST R 50287-92 Plate snap-gauges with changeable lips for diameters over 100 to 360 mm. Dimensions 17.040.30
50288 1992   GOST R 50288-92 Pressed snap-gauges for diameters over 10 to 180 mm. Diameters 17.040.30
51066 1997   GOST R 51066-97 Profile survey systems of vertical shaft guides. General requirements and testing methods 17.040.30
51918 2002   GOST R 51918-2002 The equipment for care of coordinates through the vertical mine. General technical requirements and test methods 17.040.30
52028 2003   GOST R 52028-2003 Nondestructive testing. Measurement of rupture and corrosion by a superficial activation method 17.040
17.060 Top 体積、質量、密度、粘度の測定
注: 測定器を含む
注: 石油製品及び天然ガスの計量→ 75.180.30
Sort Mk 規格番号 規格名称(英語) 国際規格分類
( ICSコードの説明 )
00004-180 1985   GOST 4.180-85 System of product-quality indices. Mass measures. Nomenclature of indices 03.120
17.060
00008-0005 1982   GOST 8.005-82 State system for ensuring the uniformity of measurements. Belt-conveyer continuous weigher. Methods and means of verification 17.060
00008-0021 1984   GOST 8.021-84 [withdrawn]
State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means measuring mass
17.060
00008-0024 1975   GOST 8.024-75 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring density of liquid 17.060
00008-0025 1975   GOST 8.025-75 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring kinematic viscosity of liquid 17.060
00008-0025 1996   GOST 8.025-96 State system for ensuring the uniformity of measurements. State verification schedule for means measuring viscosity of liquids 17.060
00008-0036 1974   GOST 8.036-74 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring mass of radium 17.060
00008-0064 1979   GOST 8.064-79 [withdrawn]
State system for ensuring the uniformity of measurements. The state special standard of unit of hardness on rockwell and super-rockwell scales
17.060
00008-0100 1973   GOST 8.100-73 State system for ensuring the uniformity of measurements. Volumetric glass ware, standard. Methods and means of verification 17.060
00008-0136 1974   GOST 8.136-74 State system for ensuring the uniformity of measurements. Hydraulic presses for testing building materials. Verification methods and means 17.060
19.060
00008-0190 1976   GOST 8.190-76 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring volume humidity content of petroleum and petroleum products 17.060
00008-0234 1977   GOST 8.234-77 State system for ensuring the uniformity of measurements. Volumetric glass ware. Methods and means of verification 17.060
00008-0290 1978   GOST 8.290-78 State system for ensuring the uniformity of measurements. BУ-type viscosimeters. Methods and means of calibration 17.060
00008-0346 1979   GOST 8.346-79 State system for ensuring the uniformity of measurements. Steel horisontal tanks. Methods and means of verification 17.060
00008-0368 1979   GOST 8.368-79 State system for ensuring the uniformity of measurements. Radioisotope density meters of liquid media and pulps. Methods and means for verification 17.060
00008-0400 1980   GOST 8.400-80 State system for ensuring the uniformity of measurements. Standard metallic gauges. Methods and means of verification 17.060
00008-0404 1980   GOST 8.404-80 State system for ensuring the uniformity of measurements. Vehicle tanks for food liquids. Methods and means of verification 17.060
43.080.10
00008-0428 1981   GOST 8.428-81 State system for ensuring the uniformity of measurements. Areometers. The values of coefficients of surface tension of liquids 17.060
00008-0453 1982   GOST 8.453-82 State system for ensuring the uniformity of measurements. Balance for static weighting. Methods and means for verification 17.060
00008-0469 1982   GOST 8.469-82 State system for ensuring the uniformity of measurements. Scale weighers of continious action. Methods and means of verification 17.060
00008-0469 2002   GOST 8.469-2002 State system for ensuring the uniformity of measurements. Automatic continuous proportional weighers. Methods and means of verification 17.020
17.060
00008-0470 1982   GOST 8.470-82 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring volume of liquid 17.060
00008-0477 1982   GOST 8.477-82 State system for ensuring the uniformity of measurements. State verification schedule for liquid level measuring means 17.060
00008-0482 1983   GOST 8.482-83 State system for ensuring the uniformity of measurements. Glass butyrometers. Methods and means of verification 17.060
00008-0510 1984   GOST 8.510-84 State system for ensuring the uniformity of measurements. State verification schedule for means measuring (meters) volume of liquid 17.060
00008-0520 1984   GOST 8.520-84 State system of ensuring the uniformity of measurements. General purpse balances and reference balances. Rules and procedure forverification 17.060
00008-0523 1985   GOST 8.523-85 State system for ensuring the uniformity of measurements. Weighers discrete action. Calibration methods 17.060
00008-0537 1985   GOST 8.537-85 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring of the surface coating density in the range of 0,001-1,000 kg/m2 17.060
00008-0569 1998   GOST R 8.569-98 State system for ensuring the uniformity of measurements. Vehicle tanks for oil product liquids. Methods of verification 17.060
75.180.30
00008-0598 2003   GOST R 8.598-2003 State system for ensuring the uniformity of measurements. Weighbridges for weighing of cinder vehicles in motion. Verification procedure 17.020
17.060
00008-0603 2003   GOST R 8.603-2003 State system for ensuring the uniformity of measurements. Weighbridges for weighing of road vehicles in motion. Verification procedure 17.020
17.060
01440 1978   GOST 1440-78 Instruments for determination of petroleum products penetration. General specifications 17.060
01532   GOST 1532-81 Viscosimeters of relative viscosity. Specifications 17.060
01594 1969   GOST 1594-69 Apparatus for quantitative determination of water content in petroleum, food and other products. Specifications 17.060
02939 1963   GOST 2939-63 Gases. Conditions for the determination of volume 17.060
04680 1949   GOST 4680-49 Mass recalculation method for non-standard hymidity hygroscopic materials and products 17.060
06859 1972   GOST 6859-72 Apparatus for liquids sampling and measuring. Specifications 17.060
71.040.10
07328 1982   GOST 7328-82 Weights of general application. Specifications 17.060
07328 2001   GOST 7328-2001 Weights. General specifications 17.060
09070 1975   GOST 9070-75 Viscosimeters for determination of relative viscosity of paint and lacquer materials. Specifications 17.060
09509 1974   GOST 9509-74 Scales and dosimeters. Knifeedges and bearings of steel. General requirements 17.060
10028 1981   GOST 10028-81 Glass capillary viscosimeters. Specifications 17.060
10223 1982   GOST 10223-82 Scale weighers of proportioning action scales and scale weighers of continuous action. General technical requirements 17.060
10223 1997   GOST 10223-97 Gravimetric filling instruments. General technical requirements 17.060
10708 1982   GOST 10708-82 Pendulum impactors. Specifications 17.060
19.060
13005 1967   GOST 13005-67 Interferometers for determination of liqnid and gas concentration. Methods and means for verification 17.060
13591 1968   GOST 13591-68 Potatoprobe weight. Methods and means of verification 17.060
17.020
13675 1968   GOST 13675-68 Butterprobe weight. Methods and means of verification 17.060
17.020
13697 1968   GOST 13697-68 Milk meters. Methods and means of verification 17.060
17.020
13718   GOST 13718-68 Forque (torsional) balances. Methods and means of verification 17.060
17.020
13844 1968   GOST 13844-68 Technical metallic gauges. Methods and means of verification 17.060
17.020
14004   GOST 14004-68 Lever balance of general use. Limits of weighing. Norms of accuracy 17.060
14895 1969   GOST 14895-69 Standard weightbridge. Methods and means of verification 17.060
14941 1984   GOST 14941-84 Composition and properties refractometer transmitters of liquides ssi 17.060
16464 1970   GOST 16464-70 Operating litre measuring vessels. Basic parameters and dimensions. Technical requirements 17.060
18481 1981   GOST 18481-81 Glass hydrometers and cylinders. General specifications 17.060
20180 1991   GOST 20180-91 Radioizotope densitometers for liquid and pulp measuring. General specifications 17.060
21497 1990   GOST 21497-90 Radioisotope level gauges. General specifications 17.060
22524 1977   GOST 22524-77 Glass density bottles. Specifications 17.060
23094 1978   GOST 23094-78 Glass butyrometers. General specifications 17.060
24104 1988   GOST 24104-88 General purpose laboratory balances and comparison balances. Performance. Specifications 17.060
24104 2001   GOST 24104-2001 Laboratory scales. General technical requirements 17.060
24619 1981   GOST 24619-81 Scale weighers of proportioning action, scales and scale weighers of continuous action. Capacity limits. Metrological parameters 17.060
24802 1981   GOST 24802-81 Level meters for liquid and solids. Terms and definitions 01.040.17
17.060
27735 1994   GOST 27735-94 Domestic scales. General technical requirements 17.060
28947 1991   GOST 28947-91 Glass Hydrometers. Conventional value for tne thermal cubic expasion coefficient (for use in tne preparation of measurement table for liquids) 17.060
29226 1991   GOST 29226-91 Viscosimeters of liquid. General technical requirements and testing methods 17.060
29329   GOST 29329-92 Balance for static weighing. General requirements 17.060
30124 1994   GOST 30124-94 Scales and scale weighers of continious action. General technical requirements 17.060
30414 1996   GOST 30414-96 Weighbridges for in motion weighing of vehicles. General technical requirements 17.060
50205 1992   GOST R 50205-92 Analytical gas chromatographs. Specifications and testing methods 17.060
71.040.50
51945 2002   GOST R 51945-2002 Aspirators. General specifications 17.060
13.040
52319 2005   GOST R 52319-2005 Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 1. General requirements 11.080
17.060
17.080
17.100
17.120
17.120.01
17.200.20
17.220
17.220.20
17.080 Top 時間、速度、加速度、角速度の測定
注: 測定器を含む 注: 時間測定器→ 39.040
Sort Mk 規格番号 規格名称(英語) 国際規格分類
( ICSコードの説明 )
00008-0129 1983   GOST 8.129-83 State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means measuring time and frequency 17.080
00008-0129 1999   GOST 8.129-99 State system for ensuring the uniformity of measurements. State verification schedule for means measuring time and frequency 17.080
00008-0137 1984   GOST 8.137-84 State system for ensuring the uniformity measurements. State special standard and all-union verification schedule for means measuring acceleration in shock motion 17.080
00008-0179 1976   GOST 8.179-76 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means of measurements of constant linear acceleration of a solid body in the range from 10in minus 3 degree up to 2x10 in 2 degree m/s'2 17.080
00008-0262 1977   GOST 8.262-77 State system for ensuring the uniformity of measurements. Autocar and cycle speedometers. Verification methods and means 17.080
00008-0281 1978   GOST 8.281-78 State system for ensuring the uniformity of measurements. Locomotive speedometers. Methods and means of calibration 17.080
00008-0285 1978   GOST 8.285-78 State system for ensuring the uniformity of measurements. Tachometers. Methods and means of verification 17.080
00008-0288 1978   GOST 8.288-78 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means of measring the angular velocity in the range of 5x10 in minus 8 degree up to 2,5x10 in minus 4 degree rad/s 17.080
00008-0289 1978   GOST 8.289-78 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means of measurement of constant angular acceleration within the range of 1 up to 100 rad/s2 17.080
00008-0291 1978   GOST 8.291-78 State system for ensuring the uniformity of measurements. Taximeters. Methods and mean verification 17.080
00008-0441 1981   GOST 8.441-81 State system of ensuring the unity of measurements. Actual high precision measures of frequency and time. Methods and means of verification 17.080
17.020
00008-0476 1982   GOST 8.476-82 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring linear accelerometers in the range of frequencies from 0.5 to 30Hz 17.080
00008-0515 1984   GOST 8.515-84 State system of ensuring the uniformity of measurements. Standard time and frequecy signals radiated by specialized radio stations of the State time and freqency service of the USSR. Time code 17.080
00008-0567 1999   GOST 8.567-99 State system for ensuring the uniformity of measurements. Time and frequency maesurements. Terms and definitions 01.040.17
17.080
00008-0577 2002   GOST 8.577-2002 State system for ensuring the uniformity of measurements. State verification schedule for means measuring linear accelerations and plane angle for angle displacement of a solid body 17.080
01578 1976   GOST 1578-76 Speedometers with flexible shaft drive for autocars and cycles. General technical specifications 17.080
15855 1977   GOST 15855-77 Time and frequency measurements. Terms and definitions 01.040.17
17.080
18303 1972   GOST 18303-72 Tachometers. Terms and definitions 01.040.17
17.080
18426 1973   GOST 18426-73 Taximeters automobile. General specification 17.080
18955 1973   GOST 18955-73 Linear low frequency accelerometers. Terms and definitions 01.040.17
17.080
21339 1982   GOST 21339-82 Tachometers. General specifications 17.080
23213 1984   GOST 23213-84 Speedometers for locomotives. General specifications 17.080
24907 1993   GOST 24907-93 Revolts counters and units counters. Specifications. Testing methods 17.080
27576 1987   GOST 27576-87 State automized technical stability system of unified time. Information carriers in loral chronometric system 17.080
50413 1992   GOST R 50413-92 Revolts counters and units counters. Specifications. Testing methods 17.080
50856 1996   GOST R 50856-96 Rodar meters of the speed of vehicles. Basic technical requirements. Methods of tests 17.080
52319 2005   GOST R 52319-2005 Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 1. General requirements 11.080
17.060
17.080
17.100
17.120
17.120.01
17.200.20
17.220
17.220.20
17.100 Top 力、重さ及び圧力の測定
注: 測定器を含む
Sort Mk 規格番号 規格名称(英語) 国際規格分類
( ICSコードの説明 )
00004-058 1985   GOST 4.58-85 System of product quality indices. Pressure gauges, vacuum gauges, pressure-and-vacuum gauges, braught gauges, head gauges, draught-and-head gauges. Nomenclature of indices 03.120
17.100
00004-135 1985   GOST 4.135-85 System of product quality indices. Differential pressure gauges. Nomenclature of indices 03.120
17.100
00004-386 1985   GOST 4.386-85 Product-quality index system. Surface gravimeters. Index nomenclature 03.120
17.100
00008-0005 2002   GOST 8.005-2002 State system for ensuring the uniformity of measurements. Continuous conveyer balance. Methods and means of verification 17.100
00008-0017 1979   GOST 8.017-79 State system for ensuring the uniformity of measurements. State primar standard and all-union verification schedule for means measuring pressure up to 250 MPa 17.100
00008-0052 1973   GOST 8.052-73 State system for ensuring the uniformity of measurements. Differential pressure gauges with pneumatic output. Verification methods and means 17.100
00008-0053 1973   GOST 8.053-73 State system for ensuring the uniformity of measurements. Pressure, combined pressure-vacuum, vacuum, gauges and draught gauges with pneumatic output signals. Methods of verification 17.100
00008-0065 1973   GOST 8.065-73 State system for ensuring the uniformity of measurements. The state primary standard of unit of force 17.100
00008-0065 1985   GOST 8.065-85 State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for force measuring instruments 17.100
00008-0092 1973   GOST 8.092-73 State system for ensuring the uniformity of measurements. Pressure gauges, vacuum pressure gauges, vacuum manometers, draught gauges, delivery head meters and draught head gauges with unified electric (current) output signals. Methods and means of verification 17.100
00008-0094 1973   GOST 8.094-73 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means, measuring pressure with upper limits from 10000x10 in 5 degree up to 40000x10 in 5 degree Pa 17.100
00008-0096 1982   GOST 8.096-82 State system for ensuring the uniformity of measurements. The 1-st order micromanometers of МКМ-type. Methods and means of verification 17.100
00008-0107 1981   GOST 8.107-81 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring absolute pressure within the range of 1x10 in minus 8 degree up to 1x10 in 3 degree Pa 17.100
00008-0111 1974   GOST 8.111-74 The state system for ensuring the uniformity of measurements. Dead-weight compaund pressure and vacuum gauges, МВП-2,5 type . Verification methods and means 17.100
00008-0146 1975   GOST 8.146-75 State system for ensuring the uniformity of measurements. Indicating and recording pressure gauge with integrator of SSI. Methods of verification 17.100
00008-0187 1976   GOST 8.187-76 State system for ensuring the uniformity of measurements. The state special standard and all-union verification schedule for means of measurements of the difference of pressures up to 4x10 in 4 degree Pa 17.100
00008-0223 1976   GOST 8.223-76 State system for ensuring the uniformity of measurements. State special standard and all-union verification for means measuring absolute pressure within the range of 2,7x10 in 2 degree to 4000x10 in 2 degree Pa 17.100
00008-0240 1977   GOST 8.240-77 State system for ensuring the uniformity of measurements. Measuring transducers for pressure differences with unified current output signals of the SSI. Methods and means of verification 17.100
00008-0243 1977   GOST 8.243-77 State system for ensuring the uniformity of measurements. Measuring transducers for pressure differences with unified mutual inductance output parameters of the SSI. Methods and means of verification 17.100
00008-0287 1978   GOST 8.287-78 State system for ensuring the uniformity of measurements. Standard portable dynamometers of the 3-rd grade. Methods and means of calibration 17.100
00008-0302 1978   GOST 8.302-78 State system for ensuring the uniformity of measurements. Compensated fluid micromanometers with micrometric screw, type МКВ-250 . Methods and means of verification 17.100
00008-0340 1978   GOST 8.340-78 State system for ensuring the uniformity of measurements. Dead-weight tester type МП-0,4 methods and means of verification 17.100
00008-0425 1981   GOST 8.425-81 State system for ensuring the uniformity of measurements. Machines for testing metal fatigue. Methods and means for verification 17.100
77.040.10
00008-0433 1981   GOST 8.433-81 State system for ensuring the uniformity of measurements. State special standard and state hierarchy diagram for variable pressure measuring instruments in the range of 1x10 in 2 degree to 1x10 in 6 degree Pa for frequences of 5x10 in minus 2 degree to 1x10 in 4 degree Hz, durations from 1x10 in minus 5 degree to 10 s under constant pressure up to 5x10 in 6 degree Pa 17.100
00008-0479 1982   GOST 8.479-82 State system for ensuring the uniformity of measurements. Piston pressure gauges. Methods and means of verification 17.100
00008-0501 1984   GOST 8.501-84 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means of measuring instruments of periodical pressure over the range 1-250 MPa at frequencies up to 10 kHz 17.100
00008-0541 1986   GOST 8.541-86 State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means measuring torque of force 17.100
01701 1975   GOST 1701-75 Automobile pressure gauges and automotive pressure indicators. General specifications 17.100
02405 1988   GOST 2405-88 Pressure gauges, vacuum gauges, pressure-and-vacuum gauges, draught gauges and draught-and-pressure gauges. General specifications 17.100
03779 1955   GOST 3779-55 Copper sticks for crushers 17.100
08291 1983   GOST 8291-83 Dead-weight preassure-gauge testers. General technical requirements 17.100
09500 1984   GOST 9500-84 Standard dynamometers portable. General specifications 19.060
17.100
09921 1981   GOST 9921-81 Tyre hand-operated manometers. General specifications 17.100
09933 1975   GOST 9933-75 Absolute pressure gauges and u-tubes combined pressure vacuum gauges 17.100
13717 1984   GOST 13717-84 Indicating manometric-action instruments with electric contacts. General specifications 17.100
13782 1968   GOST 13782-68 General-purpose spring dynamometers. Methods and means of verification 17.100
17.020
13837   GOST 13837-79 General-purpose dynamometers. Specifications 19.060
17.100
14010 1974   GOST 14010-74 Pickup-pressure and differencial switches ssi 17.100
14017 1968   GOST 14017-68 State system for ensuring the uniformity of measurements. Force-measuring standard machines of 2 grade. Methods and means of verification 17.100
17.020
18140 1984   GOST 18140-84 SSI differential pressure gauges . General specifications 17.100
22520 1985   GOST 22520-85 Pressure, vacuum and pressure difference transmitters with electrical analog output signals, SSI. General specifications 17.100
22521 1985   GOST 22521-85 Pressure, vacuum and pressure difference transmitters with pneumatic analog output signal, SSI. General specifications 17.100
22725 1977   GOST 22725-77 Reference high pressure manganin gauges. Technical requirements 17.100
25864 1983   GOST 25864-83 Force measuring standard machines of 2 grade. General technical requirements 19.060
17.100
26969 1986   GOST 26969-86 Standard orifice plates for flowmeters. Specifications 17.100
27758 1988   GOST 27758-88 The vacuum gauges. Type. General technical requirements 17.100
28836 1990   GOST 28836-90 Strain gauge load cells. General technical requirements and testings methods 19.060
17.100
30129 1996   GOST 30129-96 Scale load cells. General technical requirements 17.100
52319 2005   GOST R 52319-2005 Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 1. General requirements 11.080
17.060
17.080
17.100
17.120
17.120.01
17.200.20
17.220
17.220.20
17.120 Top 流量の測定
注: 測定器及び設備を含む。
Sort Mk 規格番号 規格名称(英語) 国際規格分類
( ICSコードの説明 )
00004-158 1985   GOST 4.158-85 System of product-quality indices. Volumetric, velocity counters, batchmeters and flowmeters. Electromagnetic flowmeters. Vortex flowmeters, batchmeters and metering plants. Nomenclature of indices 03.120
17.120
00008-0122 1985   GOST 8.122-85 State system for ensuring the uniformity of measurements. Rotameters. Methods of verifications 17.120.10
17.020
00008-0142 1975   GOST 8.142-75 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring mass flow of liquid within the range of 1x10 in minus 3 degree up to 2x10 in 3 degree kg/s 17.120
00008-0143 1975   GOST 8.143-75 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring volumetric flow of gas within the range of 1x10 in minus 6 up to 1x10 in 2 degree m3/s 17.120
00008-0145 1975   GOST 8.145-75 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring volumetric flow of liquids within the range of 3x10 in minus 6 degree up to 10 m3/sec 17.120
00008-0156 1983   GOST 8.156-83 State system for ensuring the uniformity of measurements. Cold water meters. Verification methods and means 17.120
91.140.60
00008-0220 1976   GOST 8.220-76 State system for ensuring the uniformity of measurements. Oil dispensing pumps. Verification methods and means 17.120
00008-0247 1977   GOST 8.247-77 [withdrawn => GOST 8.247-2004]
State system for ensuring the uniformity of measurement. Sounding stick for oil product level measuring in transport and stationary reservoirs. Methods and means of verification
17.120
75.180.30
00008-0252 1977   GOST 8.252-77 State system for ensuring the uniformity of measurements. Tachometric ball flowmeters. Methods and means for verification 17.120
00008-0320 1978   GOST 8.320-78 State system for ensuring the uniformity of measurements. Flowmeter electromagnetic industry. Methods and means for verification 17.120
00008-0324 1978   GOST 8.324-78 State system for ensuring the uniformity of measurements. Gas meters. Verification methods and means 17.120
91.140.40
00008-0361 1979   GOST 8.361-79 State system for ensuring the uniformity of measurements. Technique of measuring by the velocity at a single point of a pipe cross-section 17.120
00008-0364 1979   GOST 8.364-79 State system of ensuring the uniformity of measurements. Trade measuring automats for delivery of liquid food products. Methods and means of verification 17.120
55.230
00008-0369 1979   GOST 8.369-79 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring mass flow of gas within the range of 4x10 in minus 2 degree up to 2,5x10 in 2 degree kg/sec 17.120
00008-0373 1980   GOST 8.373-80 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring volumetric flow of petroleum products within the range of 2,8x10in minus 6 degree up to 2,8x10 in minus 2 degree m3/sec 17.120
00008-0374 1980   GOST 8.374-80 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring volumetric flow of water within the range of 2,8x10 in minus 8 degree up to 2,8x10 in minus 2 degree m3/sec 17.120
00008-0407 1980   GOST 8.407-80 State system for ensuring the uniformity of measurements incompressible liquid flowmeters. Standardizes metrological characteristics 17.120
00008-0439 1981   GOST 8.439-81 State system for ensuring the uniformity of measurements. Water flow rate in closed conduits. Technique of measuring by velocity-area method 17.120
00008-0451 1981   GOST 8.451-81 State system of ensuring the uniformity of measurements. Positive displacement liquid meters. Methods and means for verification 17.120
00008-0464 1982   GOST 8.464-82 State system for ensuring the uniformity of measurements. Gas mass flow rate. Calculated relations of indirect methods of measurements 17.120
00008-0486 1983   GOST 8.486-83 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means of measuring the velocity of water flow in the range of 0.005-25 m/s 17.120
00008-0542 1986   GOST 8.542-86 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring the velocity of air flow 17.120
00008-0563-01 1997   GOST 8.563.1-97 State system for ensuring the uniformity of measurements. Measurement of liquids and gases flow rate and quantity by differential pressure method. Orifice plates, nozzles ISA 1932 and Venturi tubes inserted in circular cross-section filled conduits. Specifications 17.120
00008-0563-02 1997   GOST 8.563.2-97 State system for ensuring the uniformity of measurements. Measurement of liquids and gases flow rate and quantity by differential pressure method. Measurement procedure by orifice instruments 17.120
00008-0563-03 1997   GOST 8.563.3-97 State system for ensuring the uniformity of measurements. Measurement of liquids and gases flow rate and quantity by differential pressure method. Procedure and module of calculations. Software 17.120
06019 1983   GOST 6019-83 Impeller counters for cold water. General specifications 17.120
91.140.60
06376 1974   GOST 6376-74 Hand anemometer accounting device. Specifications 17.120
07193 1974   GOST 7193-74 Hand induction anemometer. Specifications 17.120
09932 1975   GOST 9932-75 Laboratory glass flowmeters. Specifications 17.120
11881 1976   GOST 11881-76 Controllers acting without an independent energy source, SSI. General specifications 25.040.40
17.120
13045 1981   GOST 13045-81 General industrial rotameters. General specifications 17.120
14167 1983   GOST 14167-83 Turbine meters for cold water. Specifications 17.120
91.140.60
15126 1980   GOST 15126-80 Water flow rate measuring instruments. Fluvial hydrometric curremt meters. General technical requirements 17.120
15528 1986   GOST 15528-86 Instruments for measuring flowrate, volume or mass of flowing fluid and gas. Terms and definitions 01.040.17
17.120
21482 1976   GOST 21482-76 Single-layer measuring metal bellows. Specifications 17.120
21557 1983   GOST 21557-83 The bushings and rings for metallic bellows. General specifications 17.120
22616 1977   GOST 22616-77 Vortex tubes. Terms and definitions 01.040.17
17.120.10
23720 1979   GOST 23720-79 Venturi tubes. Specifications 17.120
25668 1983   GOST 25668-83 Flowmetres. Basic parametres 17.120
25855 1983   GOST 25855-83 Lebel and discharge of surface waters. General requirements for measurement 17.120
28066 1989   GOST 28066-89 SSI. Positive displacement liquid maters. General specifications 17.120
28723 1990   GOST 28723-90 Velocity electromagnetic and vortex flowmeters. General technical requirements and test methods 17.120
28724 1990   GOST 28724-90 Velocity gas meters. General technical requirements and test methods 17.120
50193-01 1992   GOST R 50193.1-92 Measurement of water flow in closed conduits. Meters for cold potable water. Specifications 17.120.10
91.140.60
50193-02 1992   GOST R 50193.2-92 Measurement of water flow in closed conduits. Meters for cold potable water. Installation requirements 17.120.10
91.140.60
50193-03 1992   GOST R 50193.3-92 Measurement of water flow in closed conduits. Meters for cold potable water. Test methods and equipment 17.120.10
91.140.60
50601 1993   GOST R 50601-93 Impeller counters for potable water. General specifications 17.120
91.140.60
50818 1995   GOST R 50818-95 Gas motors volumetric. General technical requirements and test methods 17.120.10
91.140.40
51657-00 2000   GOST R 51657.0-2000 Water flow measurement in hydromelioration and water economics systems. Basic principles 17.120
51657-02 2000   GOST R 51657.2-2000 Water flow measurement in hydromelioration and water economics systems. Methods of water flow measurement. Classification 17.120
51657-03 2000   GOST R 51657.3-2000 Water flow measurement in hydromelioration and water economics system. Flow gauging structures. Classification 17.120
51657-04 2002   GOST R 51657.4-2002 Water flow measurement in hydromelioration and water supply systems. Water discharge measurement in open channels by triangular profile weirs. General technical requirements 17.120
93.160
51657-05 2002   GOST R 51657.5-2002 Water flow measurement in hydromelioration and water sypply systems. Manner of measurement of water discharge using the ultrasonic (acoustic) velocity meters. General technical requirements 17.120
93.160
52319 2005   GOST R 52319-2005 Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 1. General requirements 11.080
17.060
17.080
17.100
17.120
17.120.01
17.200.20
17.220
17.220.20
ED1 21482 1987   GOST ED1 21482-87 Single - layer measuring metal bellows. Specifications 17.120
17.140 Top 音響及び音響測定
注: 測定器及び試験装置を含む。
注: 騒音(環境問題)→ 13.140
注: 建物における音響問題→ 91.120.20
Sort Mk 規格番号 規格名称(英語) 国際規格分類
( ICSコードの説明 )
00002-741 1968   GOST 2.741-68 Unified system of design documentation. Graphical sumbols in diagrams. Acoustic devices 01.080.40
17.140
00008-0038 1975   GOST 8.038-75 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring pressure in the air 17.140
00008-0038 1994   GOST 8.038-94 State system for ensuring the uniformity of measurements. State verification schedule for means measuring the airborne sound pressure in the frequencys range 2 Hr -100 kHr 17.140
00008-0153 1975   GOST 8.153-75 State system of ensuring the uniformity of measurement. Measuring condenser microphones. Methods and means of verification 17.140.50
00008-0154 1975   GOST 8.154-75 State system for ensuring the uniformity of measurements. "Artifical ear"-type measuring instruments. Methods and means of verification 17.140.50
00008-0233 1977   GOST 8.233-77 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for measuring means of sound pressure in water medium of frequency range 0,01-1 hz 17.140
00008-0257 1984   GOST 8.257-84 State system for ensuring the uniformity of measurements. Sound level meters. Calibration methods 17.140.50
00008-0475 1982   GOST 8.475-82 State system for ensuring the uniformity of measurements. Standard noise figure and equivalent noise temperature of amplifiers and receivers. Measurement procedure 17.140.01
00008-0555 1991   GOST 8.555-91 Characteristics and calibration of hydrophones for operation in the frequency range 0,5 MHz to 15 MHz 17.140.50
00012-01-001 1989   GOST 12.1.001-89 Occupational safety standarts sustem. Ultrasound. General safety requirements 13.140
17.140
00012-02-016-01 1991   GOST 12.2.016.1-91 Occurational safety standards system. Compressing equipment. Determination of noise characteristics. General requirments 17.140.20
23.140
13.140
00012-02-016-02 1991   GOST 12.2.016.2-91 Occupational safety standards system. CoMpression equipment. Noise characteristics determination method of stationary compressor sets 17.140.20
23.140
13.140
00012-02-016-03 1991   GOST 12.2.016.3-91 Occupational safety standards system. Compressing equipment. Determination method of noise characteristics of mobile compressor stations 17.140.20
23.140
13.140
00012-02-016-04 1991   GOST 12.2.016.4-91 Occupational safety standards system. Compressing equipment. Determination method of noise characteristics of stationary compressor stations and installations 17.140.20
23.140
13.140
00012-02-016-05 1991   GOST 12.2.016.5-91 Occupational safety standards system. Compressing equipment. Noise characteristics and antinoise protection. Lay-out ( composition, formulation, contents ) of technical documentation 17.140.20
23.140
13.140
00012-02-030 2000   GOST 12.2.030-2000 Occupational safety standards system. Hand tools. Noise characteristics. Limits. Methods of testing 17.140.20
00012-02-110 1985   GOST 12.2.110-85 Occupational safety standards systems. General-purpose stationary air piston compressors. Norms and methods for determination of noise characteristics 17.140.20
23.140
13.140
00017-02-04-04 1982   GOST 17.2.4.04-82 Nature protection. Atmosphere. Rating of ambient noise characteristics of inland and coastwise navigation ships 17.140.30
13.140
00025-002 1980   GOST 25.002-80 Acoustic emission. Terms, definitions and symbols 01.040.17
17.140
10893 1987   GOST 10893-87 Electronic hearing aids. General specifications 17.140.50
11948 1978   GOST 11948-78 Devices for measurement of detonation velocity oscilation and parasitic amplitude modulation factors for sound recording and reproduction apparatus. Technical requirements and test methods 17.140
12090 1980   GOST 12090-80 Frequencies for acoustic measurements. Prefered rows 33.140
17.140
16372 1993   GOST 16372-93 Rotating electric machines. Limiting values of noise levels 17.140.20
29.160.01
17187 1981   GOST 17187-81 Sound level meters. General technical requirementsand methods of testing 17.140.50
17228 1987   GOST 17228-87 Passanger and transport acroplanes. Acceptable noise levels on ground 49.020
17.140.30
17229 1985   GOST 17229-85 Passanger and transport aeroplanes. Determination of noise levels on ground 49.020
17.140.30
20444 1985   GOST 20444-85 Noise. Traffic flows. Methods of noise characteristic measurement 17.140.30
22547 1981   GOST 22547-81 Sonar equipments. Terms and definitions 01.040.17
17.140
23023 1985   GOST 23023-85 Light-weight propeller aeroplanes. Acceptable noise levels on ground and methods for its determination 49.020
13.140
17.140.30
23337 1978   GOST 23337-78 Noise. Methods of noise measurement in residential areas and in the rooms of residential, public and community buildings 17.140.01
91.120.20
23426 1979   GOST 23426-79 Noise. Methods of measurement of sound insulation by operators shelters or remote control cobins in industrial buildings 17.140.01
91.120.20
23552 1979   GOST 23552-79 Civil aviation. Permissible levels of sound shock intensity on the ground and measurinng methods 49.020
17.140.30
13.140
23628 1979   GOST 23628-79 Noise. Methods of measurement of sound insulation by acoustic hoods 17.140.01
23941 1979   GOST 23941-79 Noise. Methods of determinations of noise characteristics. General requirements 17.140.20
23941 2002   GOST 23941-2002 Noise of machines. Methods for determination of noise characteristics. General requirements 17.140.20
24146   GOST 24146-89 Auditoria. Method of measurement of reverberation time 17.140.01
91.120.20
24646 1981   GOST 24646-81 Transport supersonics aircrafts. Acceptable noise levels on the ground and method of noise level determination 49.020
13.140
17.140.30
24647 1991   GOST 24647-91 Helicopters of civil aviation. Acceptable noise levels and methods of noise level determination on the ground 49.020
13.140
17.140.30
24659 1981   GOST 24659-81 Short take off and landing aircrafts. Acceptable noise levels on the ground and method of noise level determination 49.020
13.140
17.140.30
26918 1986   GOST 26918-86 Noise. Noise-measuring techniques for railway transport 17.140.30
27243 1987   GOST 27243-87 [withdrawn]
Noise. Survey method for the determination of sound powder levels of machinery by standard noise source
17.140.20
27243 2005   GOST 27243-2005 Noise of machines. Determination of sound power levels using sound pressure. Comparison method in situ 17.140.20
27407 1987   GOST 27407-87 Piston opposite compressors. Acceptable levels and methods of determination of noise characteristics 23.140
17.140.20
27408 1987   GOST 27408-87 Noise. Methods forstatistical processing of data in determination and control of machineemitted noise levels 17.140.20
27409 1987   GOST 27409-87 Regulation of stationary equipment noise characteristics. Basic standartization 17.140.20
27409 1997   GOST 27409-97 Noise. Technical regulation of stationary equipment noise characteristics. General 17.140.20
27534 1987   GOST 27534-87 Acoustics. Measuremeet of airborne noise emitted by earth-moving machinery. Operator's position. Stationary test condition 17.140.20
53.100
27655 1988   GOST 27655-88 Acoustic emission. Terms, definitions and symbols 01.040.17
17.140
27717 1988   GOST 27717-88 Acoustics. Measurement of airborne noise emitted by earth-moving machinery. Method for determining compliance with limits for extorior noise. Stationary test cordition 17.140.20
53.100
27955 1988   GOST 27955-88 Ultrasonic magnetostrictive transducers. Methods of measuring characteristics 17.140.50
28975 1991   GOST 28975-91 Acoustics. Measurements of exterior noise emitted by earth-moving machinery. Dynamic test condition 17.140.20
53.100
30163-00 1995   GOST 30163.0-95 Household and similar electrical appliances. Test code for determination of airborne noise. Part 1. General requirements 97.030
17.140.20
97.180
30163-02 1996   GOST 30163.2-96 Hausehold and similar electrical appliances. Test code for determination of airborne. Part 2. Particular requierments for dishwachers 17.140.20
97.040.40
30163-03 1999   GOST 30163.3-99 Household and similar electrical appliances. Test code for the determination of aiborne acoustical noise. Part 2. Particular requirements for washing machines and spin extractors 97.060
17.140.20
30457 1997   GOST 30457-97 Acoustics. Determination of sound power levels of noise sources using sound intensity. Measurement at discrete points. Engineering method 17.140
30530 1997   GOST 30530-97 Noise. Methods for calculation of limit admissible nose characteristics of stationary machines 17.140.20
30683 2000   GOST 30683-2000 Noise of machines. Measurement of emission sound pressure levels at a work station and at other specified positions. Method requiring environmental corrections 17.140.20
30690 2000   GOST 30690-2000 Removable acoustical screens. Methods for determination of the in situ sound attenuation 17.140.20
30691 2001   GOST 30691-2001 Noise of machines. Declaration and verification of noise emission values 17.140.20
30720 2001   GOST 30720-2001 Noise of machines. Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level 17.140.20
31169 2003   GOST 31169-2003 Noise of machines. Measurement of emission sound pressure levels at a work station and at other specified positions. Survey method in situ 17.140.20
31170 2004   GOST 31170-2004 Vibration and noise of machines. Vibration, noise and force characteristics of marine machines and marine equipment subject to declaration and verification by testing at supplier-factory's stands 17.140.20
17.160
31171 2003   GOST 31171-2003 Noise of machines. Guidelines for the selection of method for the determination of emission sound pressure levels at a work station and at other specified positions 17.140.20
31172 2003   GOST 31172-2003 Noise of machines. Measurement of emission sound pressure levels at a work station and at other specified positions. Engineering method in an essentially free field over a reflecting plane 17.140.20
31249   GOST 31249-2004 Acoustics. Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their acoustical performance 17.140.20
31252 2004   GOST 31252-2004 Noise of machines. Guidelines for the selection of method for the determination of sound power levels 17.140.20
31273 2003   GOST 31273-2003 Noise of machines. Determination of sound power levels using sound pressure. Precision methods for anechoic and semi-anechoic rooms 17.140.20
31274 2004   GOST 31274-2004 Noise of machines. Determination of sound power levels using sound pressure. Precision methods for reverberation rooms 17.140.20
31287 2005   GOST 31287-2005 Noise. Guidelines for noise control in workrooms by means of acoustical screens 17.140.20
31295-01 2005   GOST 31295.1-2005 Noise. Attenuation of sound during propagation outdoors. Part 1. Calculation of the absorption of sound by the atmosphere 17.140.01
31295-02 2005   GOST 31295.2-2005 Noise. Attenuation of sound during propagation outdoors. Part 2. General method of calculation 17.140
31297 2005   GOST 31297-2005 Noise. Engineering method of determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment 17.140.20
31298-01 2005   GOST 31298.1-2005 Noise of machines. Determination of sound insulation performances of enclosures. Part 1. Measurements under laboratory conditions for declaration of noise performans values 17.140.01
31298-02 2005   GOST 31298.2-2005 Noise of machines. Determination of sound insulation performances of enclosures. Part 2. Measurements in situ for acceptance and verification of declared noise performance values 17.140.01
31300 2005   GOST 31300-2005 Noise of machines. Liquid pumps. Noise tests 17.140.20
31301 2005   GOST 31301-2005 Noise. Noise control design procedures for open plants 17.140.20
31352 2007 GOST 31352-2007 Noise of machines. Determination of sound power level radiated into a duct for fans and other air-moving devices using a in-duct method 17.140.20
31353-01 2007 GOST 31353.1-2007 Noise of machones. Industrial fans. Determination of sound power levels under laboratory conditions. Part 1. General overview 17.140.20
31353-02 2007 GOST 31353.2-2007 Noise of machines. Industrial fans. Determination of sound power levels under laboratory conditions. Part 2. Reverberant method 17.140.20
31353-03 2007 GOST 31353.3-2007 Noise of machines. Industrial fans. Determination of sound power levels under laboratory conditions. Part 3. Enveloping surface method 17.140.20
31353-04 2007 GOST 31353.4-2007 Noise of machones. Industrial fans. Determination of sound power levels under laboratory conditions. Part 4. Sound intensity method 17.140.20
50573 1993   GOST R 50573-93 Metal forging machines. Noise characteristics and methods of their determination 25.120.10
17.140.20
50951 1996   GOST R 50951-96 Outside noise emitted by the main. Line and shunting diesel locomotives. Measuring rates and methods 45.060.10
17.140.30
45.020
51024 1997   GOST R 51024-97 Electronics hearing aids. General specifications 17.140.50
51400 1999   GOST R 51400-99 Noise of machines. Determination of sound power levels using sound pressure. Engineering methods for small, movable sources in reverberant fields for hard - walls test rooms and for special reverberation test rooms 17.140.20
51401 1999   GOST R 51401-99 Noise of machines. Determination of sound power levels of noise sources using sound pressure. Engineering method in an essentially free field over a reflecting plane 17.140.20
51402 1999   GOST R 51402-99 Noise of machine. Determination of power levels of noise sources using sound pressure. Survey method using an enveloping measurement surface over a reflecting plane 17.140.20
51407 1999   GOST R 51407-99 Electromagnetic compatibility of technical equipment. Hearing aids. Requirement ant test methods 17.140.50
33.100
51648 2000   GOST R 51648-2000 Acoustic and tactile signals for traflic lights for vision and vision-and-hearing impaired persons. Parameters 11.180
17.140.99
93.080.30
51943 2002   GOST R 51943-2002 Acoustical barriers for transport noise reduction. Experimental methods for determination of insertion loss 17.140.30
52800 2007 GOST R 52800-2007 Noise. Coast-by methods for measurement of tyre-to-road sound emission 17.140.30
83.160.10
52893 2007 GOST R 52893-2007 Noise of machines. Test code for the measurement of airborne noise emitted by private and professional power lawn mowers and lawn and garden tractors with mowing attachments 17.140.20
52894-01 2007 GOST R 52894.1-2007 Noise of machines. Sound power rating of air-conditioning and air-source heat pump equipment. Part 1. Non-ducted outdoor equipment 17.140.20
52894-02 2007 GOST R 52894.2-2007 Noise of machines. Sound power rating of air-conditioning and air-source heat pump equipment. Part 2. Non-ducted indoor equipment 17.140.20
52895 2007 GOST R 52895-2007 Noise of machines. Acceptance test code gear units for airborne sound 17.140.20
IEC 60126 2001   GOST R IEC 60126-2001 Reference coupler for the measurement hearing aids. Construction requirements 17.140.50
11.180
17.020
IEC 60711 2001   GOST R IEC 60711-2001 Occluded-ear simulator. Technical requirements and test methods 17.140.50
11.180
17.020
ISO 00230-05 2002   GOST ISO 230-5-2002 Test code for machine tools. Part 5. Determination of the noise emission 17.140.20
25.080.01
ISO 15665 2007 GOST R ISO 15665-2007 Noise. Guidelines for acoustic insulation of pipes and valves 17.140.20
ISO 22868 2007 GOST R ISO 22868-2007 Noise of machines. Noise test engineering method for portable hand-held forestry machines with petrol engine 13.140
17.140.20
17.160 Top 振動、衝撃及び振動の測定
注: 振動及びショック(環境問題)→ 13.160
注: 釣り合い及び釣合試験機→ 21.120.40
注: 建物の振動防護→ 91.120.25
Sort Mk 規格番号 規格名称(英語) 国際規格分類
( ICSコードの説明 )
00004-304 1985   GOST 4.304-85 Production quality index system. Vibration measurement equipment and apparatus. Index nomenclature 03.120
17.160
00012-04-012 1983   GOST 12.4.012-83 Occupational safety standards system. Vibration. Means for measurement and control of vibration in site. Technical requirements 13.160
17.160
16819 1971   GOST 16819-71 Vibrometers. Terms and definitions 01.040.17
17.160
16844 1986   GOST 16844-86 [withdrawn]
Technical requipments for mechanical hammers
19.060
17.160
25.140
16844 1993   GOST 16844-93 Vibration. Requirements for testing mechanical hammers 17.160
19.060
17770 1986   GOST 17770-86 Hand-holding machines. Vibration characteristics requirements 25.140
17.160
20815 1993   GOST 20815-93 Rotating electrical machines. Mechanical vibration of centain machines with chaft heights 56 mm and higher. Measurement, evaluation and limits of the vibration severity 29.160.01
17.160
20832 1975   GOST 20832-75 Standard system of vibration. Electric rotative machines of mass up to 0,5 kg. Vibration limit 29.160.01
17.160
23718 1993   GOST 23718-93 Passenger and transport aeroplanes and helicopters. Admissible levels of vibration in saloons and crew cabins and methods of vibration measuring 49.020
17.160
13.160
23719 1979   GOST 23719-79 Passenger and transport aeroplanes and helicopters. Methods of measuring vibrations parameters in saloons and crew cabins 17.160
49.020
24346 1980   GOST 24346-80 Vibration. Terms and definitions 01.040.17
17.160
24347 1980   GOST 24347-80 Vibration. Designations and units of quantities 17.160
01.060
25051-04 1983   GOST 25051.4-83 Electrodynamic vibration testing equipment. General specifications 17.160
19.060
25275 1982   GOST 25275-82 Standards system on vibration. Devices for measuring the vibration of rotary machines. General technical requirements 17.160
25364 1988   GOST 25364-88 Aggregates steam turbined stationary. Vibration normes and general requirements for realizing of measurements 27.040
17.160
25364 1997   GOST 25364-97 Land-based steam turbine-generator sets. Evaluation of machine vibration by measurement on non-rotating parts and requirements for the measurement of vibration 27.040
17.160
26043 1983   GOST 26043-83 Vibration. Dynamic characteristics of stationary machines. General 17.160
26044 1983   GOST 26044-83 Vibration. Equipment for operational monitoring of power hydroturbine unit vibration state. General technical requirments 17.160
27.140
26493 1985   GOST 26493-85 Vibration. Pulp and paper production processing equipment, vibration standards. Technical requirements 85.100
17.160
27164 1986   GOST 27164-86 Special instrumentation for operational monitoring bearing vibration in large stationary aggregates. Technical requirements 21.100
17.160
27165 1997   GOST 27165-97 Large land-based steam turbine-generator sets. Evaluation of machine vibration by measurement on rotating shafts and general requirements for the measurement of vibration 27.040
17.160
27259 1987   GOST 27259-87 Earth-moving machinery. Operator seat. Transmitted vibration 53.100
13.160
17.160
28362 1989   GOST 28362-89 Vibration and shosk. Vibration isolators. Information supplied by the user and manufacturer 17.160
30296 1995   GOST 30296-95 General-purpose measuring instruments for determination of main vibration parameters. General requirements 17.160
30434 1996   GOST 30434-96 Air conditioning and ventilating equipment. Rates and methods of vibration-survival and vibration-resistance control 17.160
23.120
30576 1998   GOST 30576-98 Mechanical vibration. Centrifugal feed pumps for thermal stations. Evaluation of machine vibration and requirements for the measurement of vibration 27.080
17.160
30652 1999   GOST 30652-99 Vibration. Calibration of vibration and shock pick-ups. Part 3. Secondary vibration calibration by comparison methods 17.160
31170 2004   GOST 31170-2004 Vibration and noise of machines. Vibration, noise and force characteristics of marine machines and marine equipment subject to declaration and verification by testing at supplier-factory's stands 17.140.20
17.160
31349 2007 GOST 31349-2007 Reciprocating internal combustion engine driven alternating current generating sets. Measurement and evaluation of mechanical vibrations 17.160
27.020
29.160.40
31351 2007 GOST 31351-2007 Vibration. Industrial fans. Measurement of vibration 17.160
23.120
50209 1992   GOST R 50209-92 Vibration. Requirements for means of testing mechanical hammers 17.160
25.140.30
51376-01 1999   GOST R 51376.1-99 Hand-held portable power tools. Measurement of vibrations at the handle. Part 1. General 25.140
17.160
51376-02 1999   GOST R 51376.2-99 Hand-held portable power tools. Measurement of vibrations at the handle. Part 2. Chipping hammers and riveting hammers 25.140
17.160
51376-03 1999   GOST R 51376.3-99 Hand-held portable power tools. Measurement of vibrations at the handle. Part 3. Rock drills and rotary hammers 25.140
17.160
51376-04 1999   GOST R 51376.4-99 Hand-held portable power tools. Measurement of vibrations at the handle. Part 4. Grinders 25.140
17.160
51376-05 1999   GOST R 51376.5-99 Hand - held portable power tools. Measurement of vibrations at the handle. Part 5. Pavement breakers and hammers for construction work 25.140
17.160
51376-06 1999   GOST R 51376.6-99 Hand-held portable power tools. Measurement of vibrations at the handle. Part 6. Impact drills 25.140
17.160
51399 1999   GOST R 51399-99 Mechanical vibration. Measurement of vibration generated internally in railway tunnels by the passage of trains 17.160
51498 1999   GOST R 51498-99 Mechanical vibration. Susceptibility and sensitivity of machines to unbalance 17.160
25.020
51499 1999   GOST R 51499-99 Environmental dynamic testing for machines, instruments and other articles. Vibration. Time-history method 17.160
51502 1999   GOST R 51502-99 Environmental dynamic testing for machines, instruments and other articles. Exposure to broad-band random vibration (digital control) 17.160
19.060
19.040
52892 2007 GOST R 52892-2007 Vibration and shock. Vibration of buildings. Measurement of vibration and evaluation of its effects on structure 17.160
91.120.25
ISO 02954 1997   GOST ISO 2954-97 Mechanical vibration of rotating and reciprocating machinery. Requirements for instruments for measuring vibration severity 17.160
ISO 05347-00 1995   GOST ISO 5347-0-95 Vibration. Methods for the calibration of vibration and shock pick-ups. Part 0. Basic concepts 17.160
ISO 05347-01 1996   GOST ISO 5347-1-96 Vibration. Calibration of vibrations and shock pick-ups. Part 1. Primary vibration calibration by laser interferometry 17.160
ISO 05347-02 1997   GOST ISO 5347-2-97 Vibration. Methods for the calibration of vibration and shock pick-ups. Part 2. Primary shock calibration by light cutting 17.160
ISO 05348 1999   GOST R ISO 5348-99 Mechanical vibration and shock. Mechanical mounting of accelerometers 17.160
ISO 07626-01 1994   GOST ISO 7626-1-94 Vibration and shock. Experimental determination of mechanical mobility. Basic definitions and transducers 17.160
ISO 07626-02 1994   GOST ISO 7626-2-94 Vibration and shock. Experimental determination of mechanical mobility. Measurements using single-point translation excitation with an attached vibration exciter 17.160
ISO 07626-05 1999   GOST ISO 7626-5-99 Vibration and shock. Experimental determination of mechanical mobility. Part 5. Measurements using impact excitation with an exciter which is not attached to the structure 17.160
ISO 07916 1999 GOST R ISO 7916-99 [withdrawn]
Forestry machinery. Portable bruch-saws. Vibration. Test methods
17.160
65.060.80
ISO 07919-01 1999   GOST R ISO 7919-1-99 Mechanical vibration of non-reciprocating machines. Measurements on rotating shafts and evaluation criteria. General guidelines 17.160
ISO 07919-03 1999   GOST R ISO 7919-3-99 Mechanical vibration of non-reciprocating machines. Measurements on rotating shafts and evaluation criteria. Coupled industrial machines 17.160
27.040
23.140
ISO 07919-04 1999   GOST R ISO 7919-4-99 Mechanical vibration of non-reciprocating machines. Measurements on rotating shafts and evaluation criteria. Gas turbine sets 17.160
27.040
ISO 08002 1999   GOST ISO 8002-99 Mechanical vibration. Land vehicles. Method for reporting measured data 17.160
43.020
ISO 08042 1999   GOST R ISO 8042-99 Mechanical vibration and shock. Seismic transducers for shock and vibration measurements. Characteristics to de specified 17.160
ISO 08579-02 1999   GOST R ISO 8579-2-99 Mechanical vibration. Determination of mechanical vibration of gear units during acceptance testing 21.200
17.160
ISO 10112 1999   GOST R ISO 10112-99 Damping materials. Graphical presentation of the complex modulus 01.080.30
17.160
ISO 10326-01 1999   GOST R ISO 10326-1-99 Mechanical vibration. Laboratory method for evaluating vehicle seat vibration. Part 1. Basic requirements 17.160
43.040.60
ISO 10811-01 2007 GOST R ISO/TS 10811-1-2007 Vibration and shock. Vibration in buildings with sensitive equipment. Part 1. Measurement and evaluation 17.160
91.120.25
ISO 10816-01 1997   GOST ISO 10816-1-97 Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Part 1. General guidelines 17.160
ISO 10816-03 1999   GOST R ISO 10816-3-99 Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Part 3. Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15000 r/min 17.160
ISO 10816-04 1999   GOST R ISO 10816-4-99 Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Part 4. Gas turbine driven sets 17.160
ISO 10817-01 1999   GOST R ISO 10817-1-99 Mechanical vibration. Rotating shaft vibration measuring systems. Part 1. Relative and absolute sensing of radial vibration 17.160
ISO 10819 1999   GOST R ISO 10819-99 Mechanical vibration and shock. Method for the measurements and evaluation of the vibration transmissibility of gloves at the palm of the hand 13.160
17.160
ISO 10846-01 1999   GOST R ISO 10846-1-99 Acoustic and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements. Part 1. Principles and guidelines 17.160
ISO 11811-02 2007 GOST R ISO/TS 10811-2-2007 Vibration and shock. Vibration in buildings with sensitive equipment. Part 2. Classification 17.160
91.120.25
ISO 13753 1999   GOST R ISO 13753-99 Mechanical vibration and shock. Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system 13.160
17.160
ISO 14837-01 2007 GOST R ISO 14837-1-2007 Mechanical vibration. Ground-borne noise and vibration arising from rail systems. Part 1. General guidance 17.160
45.080
93.060
ISO 18436-01   GOST R ISO 18436-1-2005 Condition monitoring and diagnostics of machines. Requirements for training and certification of personnel. Part 1. Requirements for certifying bodies and the certification process 03.100.30
17.160
ISO 18436-02   GOST R ISO 18436-2-2005 Condition monitoring and diagnostics of machines. Requirements for training and certification of personnel. Part 2. Vibration condition monitoring and diagnostics 03.100.30
17.160
17.180 Top 光学及び光学的測定
Sort Mk 規格番号 規格名称(英語) 国際規格分類
( ICSコードの説明 )
00002-787 1971   GOST 2.787-71 Unified system for design documentation. Graphic designations in diagrams. Elements, devices and arrangements of gas chromatograph system 01.080.30
17.180.30
00004-361 1985   GOST 4.361-85 Product-quality index system. Mass-spectrometric analysers. Index nomenclature 03.120
17.180.30
71.040.10
00004-417 1986   GOST 4.417-86 Product-quality index system. Geodesic instruments. Index nomenclature 03.120
17.180.30
00004-447 1986   GOST 4.447-86 Product-quality index system. Optical instruments for linear measurements. Nomenclature of indices 03.120
17.180.30
17.040.30
00004-448 1986   GOST 4.448-86 Product-quality index system. Optical instruments for angular measurements. Nomenclature of indices 03.120
17.180.30
17.040.30
00004-449 1986   GOST 4.449-86 Product-quality index system. Optical instruments for control of surface roughness and quality. Nomenclature of indices 03.120
17.180.30
17.040.30
00004-450 1986   GOST 4.450-86 Product-quality index system. Instruments for spectral analysis. Nomenclature of indices 03.120
17.180.30
00004-452 1986   GOST 4.452-86 Product-quality index system. Phetometric instruments. Nomenclature of indices 03.120
17.180.30
00008-0003 1983   GOST 8.003-83 State system for ensuring the uniformity of measurements. Tool-making microscopes. Methods and means of verification 17.180.30
37.020
00008-0014 1972   GOST 8.014-72 State system for ensuring the uniformity of measurements. Methods and means for verification of photoelectric illumination photometers 17.180.30
00008-0023 1986   GOST 8.023-86 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring light parameters 17.180
00008-0023 1990   GOST 8.023-90 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring continuous and pulse luminous radiation parameters 17.180
00008-0023 2003   GOST 8.023-2003 State system for ensuring the uniformity of measurements. State verification schedule for means measuring the continuous and pulse luminous radiation parameters 17.180
00008-0046 1985   GOST 8.046-85 State system for ensuring the uniformity of measurements. Optical dividing heads. Verification methods 17.180.30
00008-0106 1980   GOST 8.106-80 State system for ensuring the uniformity of measurements. State special standard and all-union verification schdule for means measuring radiance and radiant intensity of heat sources within temperature range of 220-900 K 17.180
00008-0195 1989   GOST 8.195-89 State system for ensuring the uniformiry of measurements. State verification schedule for means measuring spectral density of radiance, spectral density of radiant intensity and spectral density of irradiance in the wavelength range of 0,25 - 25,00 mu; radiant intensity and irradiance in the wavelength range of 0,2 - 25,0 mu 17.180.30
00008-0197 1986   GOST 8.197-86 [withdrawn => GOST 8.197-2005]
State system for ensuring the uniforming of measurements. State special standard and state verification schedule for means measuring spectral density of energy radiance of optical radiation in the wavelength range of 0,04-0,25 um
17.180.30
00008-0205 1990   GOST 8.205-90 State system for ensuring the uniformity of measurements. State verification schedule for measurement means of chroma coordinates and chromaticity coordinates 17.180.20
00008-0215 1976   GOST 8.215-76 State system for ensuring the uniformity of measurements. Glass plates for interference measurements. Means and methods of verification 17.180.30
00008-0229 1981   GOST 8.229-81 State system for ensuring the uniformity of measurements. Infrared spectrophotometers. Methods and means of verification 17.180.30
00008-0239 1977   GOST 8.239-77 State system for ensuring the uniformity of measurements. Polarimetric plates. Methods and means of calibration 17.180.30
00008-0298 1978   GOST 8.298-78 State system ensuring the uniformity of measurements. Photoelectrical laboratory colorimeters. Methods and means of calibration 17.180.30
00008-0332 1978   GOST 8.332-78 State system for ensuring the uniformity of measurements. Light measurements. Values of relative spectral light efficiency of monochromatic radiation for photopic vision 17.180.20
00008-0336 1978   GOST 8.336-78 State system for ensuring the uniformity of measurements. ИЗМ type optical mechanical length measuring machines. Methods and means of calibration 17.180.30
17.040.30
00008-0393 1980   GOST 8.393-80 State system for ensuring the uniformity of measurements. Optical quadrants. Methods and means of verification 17.180.30
00008-0488 1983   GOST 8.488-83 State system of ensuring the unity of measurements. Measurement techniques of index of refraction distribution in transparent phase objects 17.180
00008-0499 1984   GOST 8.499-84 State system for ensuring the uniformity of measurements. State verification schedule for means of measurement of illumination effective time of exposure and colour temperature in sensitometry 17.180.30
00008-0500 1984   GOST 8.500-84 State system for ensuring the uniformity of measurements. State verification schedule for means of measurement of material optical density 17.180.30
00008-0514 1984   GOST 8.514-84 State system for ensuring the uniformity of measurements. State verification schedule for means measuring irradiance in spectrosensitomentry in the wavelength range of 0.2-1.4 um 17.180.30
00008-0538 1985   GOST 8.538-85 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring radiant flux in the wavelength range of 0,5 - 1,6 um 17.180
00008-0539 1985   GOST 8.539-85 State system for ensuring the uniformity of measurements. State verification schedule for means measuring photomaterial resolution 17.180.30
00008-0552 1986   GOST 8.552-86 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring radiant flux and irradiance in the wavelength range of 0,03-0,4 um 17.180
00008-0557 1991 GOST 8.557-91 [withdrawn]
State system for ensuring the uniformity of measurements. State verification schedule for measuring means of spectral, integral and reduced regular transmissivities within the wavelength ranges of 0.2-50.0 um, diffused and mirror reflections within the wavelength ranges of 0.1-20.0 um
17.180
00008-0557 2007 GOST 8.557-2007 State system for ensuring the uniformity of measurements. State verification schedule for means measuring the spectral, integral and reduced regular transmittance and optical density within the wavelength range from 0,2 to 50,0 um, diffused and regular reflections within the wavelength range from 0,2 to 20,0 um 17.180.01
00008-0559 1993   GOST 8.559-93 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring the optical density of materials in transmitted light 17.180.30
00008-0583 2003   GOST 8.583-2003 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of the refractive index of solid, liquid and gaseous medium 17.180
00008-0593 2002   GOST R 8.593-2002 State system for ensuring the uniformity of measurements. Infrared analysers of grain and forage. Verification procedure 17.020
17.180.30
00008-1558 1993   GOST R 8.1558-93 State system for ensuring the uniformity of measurements. State verification schedule for 1 to 1x 10 minus 3 degree V/m2 degree irradiance. Measuring means within the wavelength range of 1-50 mc 17.180
01121 1975   GOST 1121-75 Flat-parallel glass. Sets 17.180.30
01807 1975   GOST 1807-75 Radius of spherical surfacer of optical components. Series of numerical values 37.020
17.180
02786 1982   GOST 2786-82 Testing glasses for radii and form control of spherical optical surfaces. Specifications 17.180.30
02923 1975   GOST 2923-75 Flat glass plates for interference measuring ПИ 60, ПИ 80, ПИ 100, ПИ 120 17.180.30
03178 1975   GOST 3178-75 Optical bench instruments. Height of arrangement of optical axis and exit pupil 37.020
17.180.30
03514 1976   GOST 3514-76 Colourless optical glass. Technical conditions 17.180.30
04266 1979   GOST 4266-79 Water colour scale. Specifications 17.180.20
05359 1977   GOST 5359-77 Ocular screw thread for optical devices. Profile and dimensions 17.180.30
37.020
07329 1991   GOST 7329-91 Chemical laboratory and electrovacuum glassware. Polarizable and optical method of path-length difference measuring 17.180
81.040.30
07427 1976   GOST 7427-76 Geometrical optics. Terms, definitions and letter symbols 01.040.17
17.180
07721 1989   GOST 7721-89 Illuminants for colour measurements. Types. Technical requirements. Marking 17.180.20
08074 1982   GOST 8074-82 Toolmaker's microscopes. Types, main parameters and dimensions. Technical requirements 37.020
17.180.30
09847 1979   GOST 9847-79 Optical instruments for surface roughness parameters measuring. Basis parameters and types 17.180.30
10528 1990   GOST 10528-90 Levels. General specifications 17.180.30
10529 1986   GOST 10529-86 Theodolites. General specifications 17.180.30
10529 1996   GOST 10529-96 Theodolites. General specifications 17.180.30
10627 1971   GOST 10627-71 Telescopes of pyrometers of built up radiation. Calibration tables 17.180.30
17.200.20
10771 1982   GOST 10771-82 Filament electric lamps for light measuring. Specifications 17.180.30
11200 1975   GOST 11200-75 Objectives and body-tubes of the microscopes. Attaching dimensions 17.180.30
11897 1978   GOST 11897-78 Tripods for geodetic instruments. General specifications 17.180.30
11897 1994   GOST 11897-94 Tripods for geodetic instruments. General technical requirements and metods of tests 17.180.30
12995 1982   GOST 12995-82 Optical banch of trapezoidal profile. Main and conjugated dimensions. Technical requirements 17.180.30
13088 1967   GOST 13088-67 Colourimetry. Terms, symbols 17.180.20
01.040.17
13424 1968   GOST 13424-68 Teodolites. Methods for determination of errors of horizontal circle diameter 17.180.30
14686 1969   GOST 14686-69 Means of measurements for luminous quantities. Terms 01.040.17
17.180.30
15624 1975   GOST 15624-75 Mass spectrometers. Terms and definitions 01.040.17
17.180.30
16548 1980   GOST 16548-80 Silica glass and wares of it. Terms and definitions 01.040.17
17.180
17173 1981   GOST 17173-81 Spectral slits and attachments to them. Types, basic parameters and dimensions. Technical requirements 17.180.30
19223 1990   GOST 19223-90 Electro-optical range-finders. General specifications 17.180.30
07.040
19795 1982   GOST 19795-82 Measuring projectors. General technical specifications 17.180.30
20903 1975   GOST 20903-75 The rectangular fused silica cells for the spectrophotometers. Basic dimensions. Technical requirements 17.180.30
21830 1976   GOST 21830-76 Geodetic instruments. Terms and definitions 01.040.17
17.180.30
22409 1977   GOST 22409-77 Polarimetric plates. Technical requirements 17.180.30
23136 1978   GOST 23136-78 Optical materials. Parameters 17.180.30
37.020
23543 1988   GOST 23543-88 Geodetic instruments. General specifications 07.040
17.180.30
23778 1979   GOST 23778-79 Optical polarized measurements. Terms and definitions 01.040.17
17.180
24151 1987   GOST 24151-87 Inclinometers. Types. Main parameters and general technical requirements 17.180.30
24179 1980   GOST 24179-80 Glass filters, filter-lenses, lenses, dispersers and diflecting insertion for railway transport light-signal. Specifications 17.180.20
24286 1988   GOST 24286-88 Pulse photometry. Terms and definitions 01.040.17
17.180
26148 1984   GOST 26148-84 Photometry. Terms and definitions 01.040.17
17.180
27176 1986   GOST 27176-86 Spectroscopic optical instruments. Terms and definitions 01.040.17
17.180.30
27681 1988   GOST 27681-88 Gamma-resonance spectrometers. General technical requirements and test methods 17.180.30
50224 1992   GOST R 50224-92 Optical materials. Parameters 17.180.30
50314 1992   GOST R 50314-92 Optics. Reference wavelengths 17.180
50381 1992   GOST R 50381-92 Photogrammetric instruments. Terms and definitions 01.040.17
17.180.30
50997 1996   GOST R 50997-96 Mine's gydrocompass. General specification 17.180.30
51067 1997   GOST R 51067-97 Mine surveing anglemeters. General specifications 17.180.30
51503 1999   GOST R 51503-99 Devices for measurement of light technical characteristics of information display instruments. Types, basic parameters, general technical requirements 17.180.30
13.180
51774 2001   GOST R 51774-2001 Electronic tacheometers. General specification 17.180.30
IEC 61010-002-061 1999   GOST R IEC 61010-2-061-99 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-061. Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization 19.020
13.260
17.180.30
ISO 11554 2008 GOST R ISO 11554-2008 Optics and photonics. Lasers and laser-related equipment. Test methods for laser beam power, energy and temporal characteristics 17.180
17.200 Top 熱力学及び温度測定
Sort Mk 規格番号 規格名称(英語) 国際規格分類
( ICSコードの説明 )
00004-136 1985   GOST 4.136-85 Product-quality index system. Thermophysical apparatus. Nomenclature of indices 03.120
17.200.10
00004-156 1985   GOST 4.156-85 System of product-quality indices. Filled-system thermometers. Solid-expansion and bimetal thermometers and themperature controllers. Nomenclature of indices 03.120
17.200.20
00004-165 1985   GOST 4.165-85 Product-quality index system. Temperature regulators operating without outside energy source, sensor-relays. Nomenclature of mdices 03.120
17.200.20
00004-320 1985   GOST 4.320-85 Product-quality index system. Instruments for measuring temperature and humidity, switches. Nomenclature of indices 03.120
17.200.20
00008-0026 1979   GOST 8.026-79 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring quantity of heat 17.200.10
00008-0026 1996   GOST 8.026-96 State system for ensuring the uniformity of measurements. State verification schedule for means measuring energy of combustion and specific energy of combustion (combustion calorimeters) 17.200.10
00008-0078 1979   GOST 8.078-79 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule of the equipment for means of measuring temperature with in the range 1,5-4,2 k 17.200.20
00008-0079 1979   GOST 8.079-79 State system for ensuring the uniformity of measurements. State primary standard of temperature unit in the range of 13,81 to 273,15k 17.200.20
00008-0084 1979   GOST 8.084-79 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule of the equipment for means measuring temperature with in the range 4,2-13,81 k 17.200.20
00008-0130 1974   GOST 8.130-74 State system for ensuring the uniformity of measurements. General purpose visual pyrometers with disappearing filament. Verification methods and means 17.200.20
00008-0140 1982   GOST 8.140-82 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring heat conductivity of solid bodies in the range of 0,1 to 5 W/(m.K) at temperatures from 90 to 500 K and in the range from 5 to 20 W/(m.K) at temperatures from 300 to 1100 K 17.200.10
00008-0141 1975   GOST 8.141-75 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means, measuring specific heat of solid bodies within temperature range of 273,15 up to 700 K 17.200.10
00008-0155 1975   GOST 8.155-75 State system for ensuring the uniformity of measurements. Standard temperature lamps 2 cathegory. Verification methods and means 17.200.20
00008-0157 1975   GOST 8.157-75 State system for ensuring the uniformity of measurements. The temperature practical scales 17.200.20
00008-0158 1975   GOST 8.158-75 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring temperature coefficient of linear expansion in the range 4,2-90 K 17.200.20
00008-0159 1975   GOST 8.159-75 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring specific heat-conduction of solid frames in the range of temperatures 400-1800 K 17.200.10
00008-0168 1975   GOST 8.168-75 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring plasma temperatures of 5000-15000k in the infrared 17.200.20
00008-0176 1985   GOST 8.176-85 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring specific heat-conduction of solid frames in the range of temperature 1800-3000 K 17.200.10
00008-0177 1985   GOST 8.177-85 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring heat conductivity of solid frames in the range of temperature 90 to 300 K 17.200.10
00008-0178 1985   GOST 8.178-85 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means, measuring specific heat of solids at temperature from 90 to 273,15 K 17.200.10
00008-0250 1977   GOST 8.250-77 State system for ensuring the uniformity of measurements. Thermometers glass medical maximum. Verification methods and means 17.200.20
00008-0279 1978   GOST 8.279-78 State system for ensuring the uniformity of measurements. Glass liquid working thermometers. Methods of calibration 17.200.20
00008-0305 1978   GOST 8.305-78 State system for ensuring the uniformity of measurements. Manometric thermometers. Methods and means of calibration 17.200.20
00008-0312 1978   GOST 8.312-78 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring instruments of variable temperature of water medium in the range of pulsation amplitudes of temperatures within 0,01 - 3 K at the pulsation frequencies from 0,005 to 50 Hz, at background temperature from 270,15 to 380,15 K and at water flow velocity from 0,5 to 20 m/s 17.200.20
00008-0317 1978   GOST 8.317-78 State system for ensuring the uniformity of measurements. Standard glass mercury thermometers. Methods and means of calibration 17.200.20
00008-0338 1978   GOST 8.338-78 [withdrawn]
State system for ensuring the uniformity of measurements. Thermal converters of industrial thermocouple thecmometers. Methods and means of verification
17.200.20
00008-0410 1981   GOST 8.410-81 State system for ensuring the uniformity of measurements. State verification schedule for means measuring plasma temperature of 10000-15000 K in the visible and ultraviolet 17.200.20
00008-0427 1981   GOST 8.427-81 [withdrawn? => GOST 8.568-99]
State system for ensuring the uniformity of measurements. Standard platinum resistance thermometers. Methods and means of calibration
17.200.20
00008-0448 1985   GOST 8.448-85 State system for ensuring the uniformity of measurements. The calorimetric measuring primary transducers. Method of verification 17.200.10
00008-0454 1982   GOST 8.454-82 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means of measuring quantity of heat of solution and heat of reactions 17.200.10
00008-0461 1982   GOST 8.461-82 State system for ensuring the uniformity of measurements. Resistive temperature transducers. Methods and means of calibration 17.200.20
00008-0511 1984   GOST 8.511-84 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring specific heat conduction of solid frames in the range of temperatures from 4,2 to 90 K 17.200.10
00008-0558 1993   GOST 8.558-93 State system for ensuring the uniformity of measurements. State verification schedule for means measuring temperature 17.200.20
00008-0566 1996   GOST R 8.566-96 The state system for ensuring the uniformity of measurements. Standard radiation sources (reference sources) in form of black body mоdels for temperature range -50 +2500 degree C. Standard procedure for metrological certification and verification 17.200.10
00008-0577 2000   GOST R 8.577-2000 State system for assuring the uniformity of measurements. Volumetric heat (energy) of combustion of natural gas. General requirements to methods for determination 75.060
17.200.10
00008-0591 2002   GOST R 8.591-2002 State system for ensuring the uniformity of measurements. Two channel heat meters for water heat supply systems. Standardization of admitted error limits in measurements of the used thermal energy by users 17.020
17.200.10
00008-0592 2002   GOST R 8.592-2002 State system for ensuring the uniformity of measurements. Thermal energy, received by users in water heat supply system. Typical procedure of measurements 17.200.10
27.010
17.020
00008-0619 2006   GOST R 8.619-2006 State system for ensuring the uniformity of measurements. Thermographic instruments. Verification procedure 17.200.20
00112 1978   GOST 112-78 Meteorological glass thermometers. Specifications 17.200.20
00400 1980   GOST 400-80 Glass thermometers for testing of petroleum products. Specifications 17.200.20
01224 1971   GOST 1224-71 Thermometer glass. Marks 17.200.20
06616 1994   GOST 6616-94 Thermoelectric converters. General specifications 17.200.20
06651 1994   GOST 6651-94 Thermal converters of resistance. General technical requirements and test methods 17.200.20
08335 1981   GOST 8335-81 [withdrawn =>GOST 8335-96]
Visual disappearing filament micro-pyrometers. General specifications
17.200.10
08335 1996   GOST 8335-96 Visual disappearing filament pyrometers. General specifications 17.200.20
09249 1959   GOST 9249-59 Normal temperature 17.200
09871 1975   GOST 9871-75 Glass mercury electric-contact thermometers and thermoregulators. Specifications 17.200.20
10627 1971   GOST 10627-71 Telescopes of pyrometers of built up radiation. Calibration tables 17.180.30
17.200.20
12877 1976   GOST 12877-76 [withdrawn? => GOST 8.568-99]
Standard platinum resistance thermometers for low temperature. General technical requirements
17.200.20
13646 1968   GOST 13646-68 Glass thermometers, mercury for precision measuring. Specifications 17.200.20
13800 1980   GOST 13800-80 Resistance temperature transducers for means of transport. General specifications 17.200.20
13881 1968   GOST 13881-68 Thermoelectric pyrometers. Methods and means of verification 17.200.20
14002 1974   GOST 14002-74 Pickup-temperature and differential temperature gauging switches ssi 17.200.20
14008 1982   GOST 14008-82 Temperature lamps as standard ones. Types and main parameters. General requirements 17.200.20
14894 1969   GOST 14894-69 Thermoelectric standard 2-class and general industry use thermometers for low temperatures. Methods and means of verification 17.200.20
17.020
15981 1970   GOST 15981-70 Apparatus for determining dropping temperature of phenolformaldehyde resins. Specifications 17.200.20
16920 1993   GOST 16920-93 Manometric thermometers and temperature transducers. General technical requirements and methods of test 17.200.20
19855 1974   GOST 19855-74 Contact glass mercury thermometers. Specifications 17.200.20
21726 1983   GOST 21726-83 Electrical temperature regulator for system of air conditioning and refrigerating engineering. General specifications 17.200.20
22464 1977   GOST 22464-77 Thermoregulators for diesels and gas engines. General specifications 17.200.20
23125 1978   GOST 23125-78 Temperature signalling device. General technical specifications 17.200.20
23125 1995   GOST 23125-95 Temperature signalling divices. General specifications 17.200
23847 1979   GOST 23847-79 Metal sheath thermoelectric temperature transducers of КТХАС, КТХАСп, КТХКС types. Specifications 17.200.20
25741 1983   GOST 25741-83 Dials and scales of manometric thermometers. Technical requirements and marking 17.200.20
26331 1984   GOST 26331-84 Joints fastening ssi primary transducers to process pipe-linesand apparatus. Types, basic parametres and dimensions. Technical requirements 17.200.20
26331 1994   GOST 26331-94 Joints fastening primary temperature transducers to process pipe-lines and apparatus. Types and basic dimensions. Technical requirement 17.200.20
28243 1989   GOST 28243-89 Pyrometers. General technical requirements 17.200.20
28243 1996   GOST 28243-96 Pyrometers. General technical requirements 17.200.20
28498 1990   GOST 28498-90 Liquid-glass thermometers. General technical requirements. Methods of test 17.200.20
28537 1990   GOST 28537-90 Thermowells with female thread. Dimensions 17.200.20
28923 1991   GOST 28923-91 Temperatures regulators operating without outside energy source. General technical requirements and methods of test 25.040.40
17.200.20
29224 1991   GOST 29224-91 Liquid-in-glass laboratory thermometers. Principles of design, construction and use 17.200.20
30232 1994   GOST 30232-94 Thermal transducers with unified output signal. General technical requirements 17.200.20
30679 1999   GOST 30679-99 Standard platinum resistance thermometers of the first and second grades. General technical requirements 17.200.20
50117 1992   GOST R 50117-92 Short solid-stem termometers for precision use 17.200.20
50118 1992   GOST R 50118-92 Long enclosed scale termometers for precision use 17.200.20
50341 1992   GOST R 50341-92 Manometric thermometers and temperature transducers. General technical requirements and methods of test 17.200.20
50342 1992   GOST R 50342-92 Thermoelectric converters. General specifications 17.200.20
50353 1992   GOST R 50353-92 Resistive temperature transducers. General specifications 17.200.20
50356 1992   GOST R 50356-92 Measuring transducers for thermoelectric transducers and resistance thermotransducers. General technical requirements and methods of tests 17.200.20
50431 1992   GOST R 50431-92 Termocouplers. Part 1. Nominal static graduation tables 17.200.20
51233 1998   GOST R 51233-98 State system for the uniformity of measurements. Standard platinum resistance thermometers of the first and second grades. General requirements 17.200.20
51649 2000   GOST R 51649-2000 Heat meters for water heat supply systems. General specifications 17.200.10
91.140.10
52319 2005   GOST R 52319-2005 Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 1. General requirements 11.080
17.060
17.080
17.100
17.120
17.120.01
17.200.20
17.220
17.220.20
EN 01434-01 2006   GOST R EN 1434-1-2006 Heat meters. Part 1. General requirements 17.200.10
EN 01434-02 2006   GOST R EN 1434-2-2006 Heat meters. Part 2. Constructional requirements 17.200.10
EN 01434-03 2006   GOST R EN 1434-3-2006 Heat meters. Part 3. Data exchange and interfaces 17.200.10
EN 01434-04 2006   GOST R EN 1434-4-2006 Heat meters. Part 4. Pattern approval tests 17.200.10
EN 01434-05 2006   GOST R EN 1434-5-2006 Heat meters. Part 5. Initial verification tests 17.200.10
EN 01434-06 2006   GOST R EN 1434-6-2006 Heat meters. Part 6. Installation, commissioning, operational monitoring and maintenance 17.200.10
ISO 00651 1994   GOST R ISO 651-94 Solid-stem calorimeter thermometers 17.200.20
ISO 00652 1994   GOST R ISO 652-94 Enclosed-scale calorimeter thermometers 17.200.20
17.220 Top 電気学.磁気学.電気的及び磁気的測定
Sort Mk 規格番号 規格名称(英語) 国際規格分類
( ICSコードの説明 )
00002-729 1968   GOST 2.729-68 Unified system for design documentation. Graphic identifications in schemes. Electromeasuring apparatus 01.080.40
17.220.20
00004-164 1985   GOST 4.164-85 Product-quality index system. Radio spectrometrical analysers. Nomenclature of indices 03.120
17.220.20
00004-174 1985   GOST 4.174-85 System of product-quality indices. Thermoelectric temperature transducers. Pyrometers. Nomenclature of indices 03.120
17.220.20
00004-189 1985   GOST 4.189-85 System of product-quality indices. Electrical measuring resording instruments. Nomenclature of indices 03.120
17.220.20
00004-194 1985   GOST 4.194-85 System of product-quality indices. Analogue pertable laboratory electrical measuring instruments. Nomenclature of indices 03.120
17.220.20
00004-195 1985   GOST 4.195-85 System of product-quality indices. Electrical standards. Nomenclature of indices 03.120
17.220.20
00004-196 1985   GOST 4.196-85 System of product-quality indices. Analogue panel electrical measuring instruments. Nomenclature of indices 03.120
17.220.20
00004-197 1985   GOST 4.197-85 System of product-quality indices. Sets for measurement of electrical and magnetic quantities. Nomenclature of indices 03.120
17.220.20
00004-199 1985   GOST 4.199-85 System of product-quality indices. Infermation electrical measuring systems. Nomenclature of indices 03.120
17.220.20
00004-375 1985   GOST 4.375-85 Product-quality index system. Measuring analogue transducers, amplifiers, stabilizers and transformers. Index nomenclature 03.120
17.220.20
00004-376 1985   GOST 4.376-85 Product-quality index system. Combination analogue electrical measuring instruments. Index nomenclature 03.120
17.220.20
00004-385 1985   GOST 4.385-85 Product-quality index system. Meters for mognetic induction and meters for magnetic flux. Index nomenclature 03.120
17.220.20
00004-388 1985   GOST 4.388-85 Product-quality index system. Electrical measuring instruments for comparison. Index nomenclature 03.120
17.220.20
00004-392 1985   GOST 4.392-85 Product-quality index system. Electricity meters. Index nomenclature 03.120
17.220.20
91.140.50
00008-0006 1971   GOST 8.006-71 State system for ensuring the uniformity of measurements. Phase-sensitive voltmeters. Methods and means for verification 17.220.20
00008-0012 1972   GOST 8.012-72 State system for ensuring the uniformity of measurements. Methods and means for verification of pyrometric millivoltmeters 17.220.20
00008-0015 1972   GOST 8.015-72 State system for ensuring the uniformity of measurements. Method of measurements of relative dielectric permittivity and tangent of dielectric dissipation angle of solid dielectrics made of thin leafed materials in the frequency band from 9 to 10 GHz 17.220.20
00008-0022 1991   GOST 8.022-91 State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for measuring instruments of direct current strength over range from 1x10 in minus 16 degree up to 30A 17.220.20
00008-0027 1989   GOST 8.027-89 State system for ensuring the uniformity of measuremente. State primary standard and state verification schedule for measuring instruments of electromotive force and direct current 17.220.20
00008-0027 2001   GOST 8.027-2001 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of direct electrical vortage and electromotive force 17.020
17.220.20
00008-0028 1986   GOST 8.028-86 State system for ensuring the uniformity of measu rements. State primary standard and state verification schedule for means measuring electrical resistance 17.220.20
00008-0029 1980   GOST 8.029-80 State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means measuring inductance 17.220.20
00008-0030 1991   GOST 8.030-91 State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for measuring means of magnetic inductance of static field in the range from 1x10 in minus 12 degree up to 5x10 in minus 2 degree T, constant magnetic flux, magnetic inductance and magnetic moment in frequency band from 0 - 20000 Hz 17.220.20
00008-0097 1973   GOST 8.097-73 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring magnetic field intensity within frequency range 0,01 - 300 MHz 17.220.20
00008-0098 1973   GOST 8.098-73 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring electric intensity within frequency range 0,15-30 mnz 17.220.20
00008-0102 1973   GOST 8.102-73 State system for ensuring the uniformity of measurements. The state standard and all-union verification schedule for instruments measuring power of electromagnetic oscillations in waveguides within frequency range from 37,5 up to 53,57 GHz 17.220.20
00008-0109 1983   GOST 8.109-83 State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means of modulation index of hign frequency oscillations 17.220.20
00008-0110 1974   GOST 8.110-74 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring non-linear distortion ratio within frequency range from 20 up to 1000000 Hz 17.220.20
00008-0117 1982   GOST 8.117-82 State system of ensuring the uniformity of measurements. Diode slideback voltmeters. Methods and means of verification 17.220.20
00008-0118 1985   GOST 8.118-85 State system for ensuring the uniformity of measurements. Analogue electronic a.c. Voltmeters. Methods of verification 17.220.20
00008-0119 1985   GOST 8.119-85 State system for ensuring the uniformity of measurements. Selective electron voltmeters. Methods of verification 17.220.20
00008-0132 1974   GOST 8.132-74 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring current intensities from 0,04 up to 300 A within the frequency range of 0,1 up tp 300MHz 17.220.20
00008-0144 1975   GOST 8.144-75 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means, measuring magnetic induction within the range of 0,05 to 2T 17.220.20
00008-0144 1997   GOST 8.144-97 State system for ensuring the uniformity of measurements. State verification schedule for measuring means of magnetic induction of state magnetic fields within the range from 0,05 TO 2 T 17.220.20
00008-0188 1985   GOST 8.188-85 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means of measuring magnetic induction of constant field in the range of 2-10 T for temperature range from 4,2 to 300 K and from 0,1 up to 2 T for the range from 4,2 to 77 K 17.220.20
00008-0189 1976   GOST 8.189-76 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring electric intensity within frequency range 30 - 1000 mhz 17.220.20
00008-0192 1976   GOST 8.192-76 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring phase shift angle and field intensities ratio distribution in apertures of antenna system with operating dimension from 0,5x0,5 to 3x3 m2 at the frequency range from 8,2 to 12 GHz 17.220.20
00008-0194 1976   GOST 8.194-76 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuriring phase shift angle within frequency range from 8,2 to 12 GHz 17.220.20
00008-0202 1976   GOST 8.202-76 State system for ensuring the uniformity of measurements. The state primary standard and the all-union verification schedule for means measuring the flux of electrons and that of energy of the beam of accelerated electrons energy from 0,8 to 8,0 pJ (5 to 50 MeV) 17.220
00008-0209 1976   GOST 8.209-76 State system of ensuring the uniformity of measurements. Magnetoelectrical logometers. Methods and means of verification 17.220.20
00008-0212 1984   GOST 8.212-84 State system for ensuring the uniformity of measurements. Measures of electromotive force. Standard cells. Calibration methods and facilities 17.220.20
00008-0214 1976   GOST 8.214-76 State system for ensuring the uniformity of measurements. Hard-magnetic coating. Methods of measuring magnetic parameters 17.220.20
35.220.20
00008-0216 1988   GOST 8.216-88 State system for ensuring the uniformity of measurements. Voltage transformers. Verification methods 17.220.20
00008-0217 1987   GOST 8.217-87 State system for ensuring the uniformity of measurements. Current transformers. Calibration methods 17.220.20
00008-0231 1984   GOST 8.231-84 State system for ensuring the uniformity of measurements. State primay standard and all-union verification schedule for means measuring magnetic moment, magnetic susceptibility and magnetization 17.220.20
00008-0232 1977   GOST 8.232-77 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for measuring means of frequency deviation 17.220.20
00008-0232 1997   GOST 8.232-97 State system for ensuring the uniformity of measurements. State verification schedule for means measuring the frequency deviation 17.220.20
00008-0237 1977   GOST 8.237-77 [withdrawn]
State system for ensuring the uniformity of measurements. Measuring resistance coil. Methods and means of verification
17.220.20
00008-0249 1977   GOST 8.249-77 State system of ensuring the uniformity of measurements. Measuring coaxial and waveguide attenuators. Methods and means for verification at 0,1 to 17444megs frequency range 17.220.20
00008-0255 1977   GOST 8.255-77 State system for ensuring the uniformity of measurements. Capasitance measures. Methods and means of calibration 17.220.20
00008-0259 1977   GOST 8.259-77 State system for ensuring the uniformity of measurements. Electric induction watt-hour meters of active methods and means of verification 17.220.20
00008-0261 1977   GOST 8.261-77 State system for ensuring the uniformity of measurements. Galvanometers. Methods and means of verification 17.220.20
00008-0268 1977   GOST 8.268-77 State system for ensuring the uniformity of measurements. The method of carring out measurements for determination of static magnetic characteristics of hard magnetic materials 17.220.20
00008-0277 1978   GOST 8.277-78 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means of measurement of power of electromagnetic oscillations in waveguides within frequency range from 53,57 up to 78,33 GHz 17.220.20
00008-0278 1978   GOST 8.278-78 State system for ensuring the uniformity of measurements. D.C. Measuring voltaqe dividers. Methods and means of verification 17.220.20
00008-0280 1978   GOST 8.280-78 State system for ensuring the uniformity of measurements. Automatic potentiometers and balanced bridges. Methods and means of verification 17.220.20
00008-0284 1978   GOST 8.284-78 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means of measuring of relative dielectric constant of liquids, solid and gases at frequencies 1 - 10 GHz 17.220.20
00008-0292 1984   GOST 8.292-84 State system for ensuring the uniformity of measurements. The laboratory conductometers of liquid. Methods of verification 17.220.20
00008-0294 1985   GOST 8.294-85 State system of ensuring the uniformity of measurements. A.c. balanced bridges. Calibration methods 17.220.20
00008-0303 1978   GOST 8.303-78 State system for ensuring the uniformity of measurements. Teslameters for constant magnetic fields in the range from 0,01 to 2T. Methods and means of verification 17.220.20
00008-0311 1978   GOST 8.311-78 State system for ensuring the uniformity of measurements. Cathode-ray oscillographs. Methods and means for verification 17.220.20
00008-0331 1999   GOST 8.331-99 State system for ensuring the uniformity of measurement. Distortion meters. Methods and means of verification and calibration 17.220
33.140
17.020
00008-0333 1978   GOST 8.333-78 State system for ensuring the uniformity of measurements. Alternating currend compensators. Methods and means of verification 17.220.20
00008-0343 1979   GOST 8.343-79 State system for ensuring the uniformity of measurements. Air-electrical transducers. Methods and means of verification 17.220.20
00008-0344 1980   GOST 8.377-80 State system for ensuring the uniformity of measurements. Soft-magnetic materials. Methods of determination of static magnetic characteristics 17.220.20
29.030
00008-0350 1979   GOST 8.350-79 State system for ensuring the uniformity of measurements. High-frequency ammeters. Methods and means of verification 17.220.20
00008-0358 1979   GOST 8.358-79 State system for ensuring the uniformity of measurements. Method of making measurements of relative permittivity and dielectric loss tangent in the fregnency range of 0,2 to 1 GHz 17.220
00008-0363 1979   GOST 8.363-79 State system for ensuring the uniformity of measurements. Measuring coil antennas. Verification methods and means 17.220.20
33.120.40
00008-0366 1979   GOST 8.366-79 State system for ensuring the uniformity of measurements. Digital ohmmeters. Methods and means for verification 17.220.20
00008-0371 1980   GOST 8.371-80 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring electrical capacity 17.220.20
00008-0391 1980   GOST 8.391-80 State system for ensuring the uniformity of measurements. D.C. electrical energy meters. Methods and means of calibration 17.220.20
00008-0392 1980   GOST 8.392-80 State system for ensuring the uniformity of measurements. Low power SHF wattmeters and their primary measuring transformers of frequency range 0,03-78.33 GHz. Verification means and methods 17.220.20
00008-0397 1980   GOST 8.397-80 State system for ensuring the uniformity of measurements. Waveguide puise low-power meters at frequency range 5,64-37,5 GHz. Methods and menas of verifications 17.220.20
00008-0402 1980   GOST 8.402-80 State system for ensuring the uniformity of measurements. Direct current electronic analogue voltmeters. Methods and means of calibration 17.220.20
00008-0403 1980   GOST 8.403-80 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring of relative dielectric constant of solid and liquids at frequencies from 1x10 up to 1x10 in 7 degree Hz 17.220.20
00008-0405 1980   GOST 8.405-80 State system of ensuring unity of measurements. Special state standard and state verification scheme for initial permeability measuring means in 1 to 200 MHz frequency range 17.220.20
00008-0409 1981   GOST 8.409-81 State system for ensuring the uniformity of measurements. Ohmmeters. Methods and means of calibration 17.220.20
00008-0412 1981   GOST 8.412-81 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring relative dielectric constant at frequency 1-200 MHz 17.220.20
00008-0415 1981   GOST 8.415-81 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring intensities ratio distributions and phase shift angle in aperture field of antenna systems with operating dimensions from 3x3 to 6x12 m2 at the frequency range from 2,5 to 4,0 and from 8,2 to 12,0 GHz 17.220.20
00008-0416 1981   GOST 8.416-81 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring phase shift angle within frequency range from 2. 5 to 3. 5 GHz 17.220.20
00008-0422 1981   GOST 8.422-81 State system for ensuring the uniformity of measurements. Frequency meters. Methods and means for verification 17.220.20
00008-0429 1981   GOST 8.429-81 State system for ensuring the uniformity of measurements. Electronic analogue pulse voltmeters. Methods and means for verification 17.220.20
00008-0436 1981   GOST 8.436-81 State system for ensuring the uniformity of measurements. Measuring sets power supply bridges. Methods and means for checking 17.220.20
17.020
00008-0449 1981   GOST 8.449-81 State system for ensuring the uniformity of measurements. D. c. bridges. Methods and means of calibration 17.220.20
00008-0457 1982   GOST 8.457-82 State system for ensuring the uniformity of measurements. State primary standards and state verification schedule for means of measuring specific conductivity of solutions of electrolytes within the range of 1х10 in minus 4 degree to 1х10 in 2 degree Sm/m 17.220.20
00008-0457 2000   GOST 8.457-2000 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring specific conductivity of liguids 17.020
17.220.20
00008-0458 1982   GOST 8.458-82 State system for ensuring the uniformity of measurements. The thermoelectrical transducers and comparators. Methods and means of calibration 17.220.20
00008-0462 1982   GOST 8.462-82 State system of ensuring the uniformity of measurements. Superhigh frequency phasemeters and phaseshifters. Methods and means of verification 17.220.20
00008-0463 1982   GOST 8.463-82 State system of ensuring the uniformity of measurements. Measuring antennas. Measuring complex of apparatus. Methods and means of verification 17.220.20
33.120.40
00008-0478 1982   GOST 8.478-82 State system for ensuring the uniformity of measurements. D. c. measuring potentiometers. Methods and means of verification 17.220.20
00008-0491 1983   GOST 8.491-83 State system for ensuring the uniformity of measurements. Electrocontact converters for checking linear dimensions. Methods and means of verification 17.220.20
17.040.30
00008-0493 1983   GOST 8.493-83 State system for ensuring the uniformity of measurements. Coaxial impedance meters. Methods and means of verification 17.220.20
00008-0497 1983   GOST 8.497-83 State system for ensuring the uniformity of measurements. Ammeters, voltmeters, wattmeters, varmeters. Calibration methods 17.220.20
00008-0498 1983   GOST 8.498-83 State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means of measuring electrical quality factor 17.220.20
00008-0498 1998   GOST 8.498-98 State system for ensuring the uniformity of measurement. State verification scheme for means of measuring electrical quality factor 17.220.20
00008-0533 1985   GOST 8.533-85 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring phase shift angle with in the frequency range from 25,95 to 37,50 GHz 17.220
00008-0535 1985   GOST 8.535-85 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means of measuring power of electromagnetic oscillations in waveguide within frequency range from 78,3 to 178,6 17.220.20
00008-0540 1985   GOST 8.540-85 State system for ensuring the uniformity of measurements. State special standard and state verification shedule hor means measuring pulsed electric and magnetic fields 17.220.20
00008-0540 1993   GOST 8.540-93 State system for insuring the uniformity of measurements. State verification schedule for means measuring maximum values of impulse electric and magnetic fields 17.220.20
00008-0544 1986   GOST 8.544-86 State system for ensuring the uniformity of measurements. Relative dielectric permittivity the loss tangent of solid dielectrics. Procedure of measure from 10 in 9 degree to 10 in 10 degree Hz 17.220.20
29.035
00008-0550 1986   GOST 8.550-86 State system for ensuring the uniformity of measurements. State special standard and state verification schedul for means of measuring sinusoidal current ratio 17.220.20
00008-0551 1986   GOST 8.551-86 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring electric power and power factor over the frequency range 40-20000 Hz 17.220.20
00008-0560 1994   GOST 8.560-94 State system for ensuring the uniformity of measurements. State verification shedule for measure of electric field intensity measuring within freguency range 0.0003-1000 MGz 17.220.20
00008-0562 1996   GOST R 8.562-96 State system for ensuring the uniformity of measurements. State verification schedule for means measuring power of electromagnetic waves within frequency range from 0,03 to 37,50 GHz 17.220.20
00008-0564 1996   GOST R 8.564-96 State system for ensuring the uniformity of measurements. State verification shedule for means of electric field intensity measurement within frequency range 0-20 kHz 17.220.20
00008-0564 1998   GOST 8.564-98 State system for ensuring the uniformity of measurement. State verification scheme for means of measuring electrical capacity in frequency range from 1 to 100 MHz 17.220.20
00008-0569 2000   GOST 8.569-2000 State system for ensuring the uniformity of measurements. Low power SHF vattmeters of frequency range 0,02-178,6 GHz. Verification and calibration methods 17.220.20
00008-0574 2000   GOST R 8.574-2000 State system for ensuring the uniformity of measurements. State verification schedule for means of electromagnetic field density measurement within frequency range 0,3...178,4 GHz 17.220.20
00012-02-091 1983   GOST 12.2.091-83 Occupational safety standards system. Indicating and recording electrical measuring instruments. Safety requirements 13.100
17.220.20
00012-03-019 1980   GOST 12.3.019-80 Occupational safety standards system. Electrical tests and measurements. General safety requirements 13.100
19.080
17.220
00026-010 1980   GOST 26.010-80 Unified system of standards for instrument-making. Measuring and automation devices. Input and output frequency electric continuous signals 17.220
00026-011 1980   GOST 26.011-80 Measuring and automation devices. Input and output current and voltage continuous signals 17.220
00026-014 1981   GOST 26.014-81 Measurement and automation means. Input and output electric coding signals 17.220
01609 1976   GOST 1609-76 Calibrated wires for electromeasuring instruments. Specifications 17.220.20
29.060.10
01954 1982   GOST 1954-82 Electromotive operating measures. Standard cells. General specifications 17.220.20
01983 1989   GOST 1983-89 [withdrawn]
Voltage transformers. General specifications
17.220.20
29.180
01983 2001   GOST 1983-2001 Voltage transformers. General specifications 17.220.20
05365 1983   GOST 5365-83 Electrical measuring instruments. Dials and scales. General technical requirements 17.220.20
05944 1991   GOST 5944-91 Dimensions of panel mounted indicating and recording electrical measuring instruments 17.220.20
06570 1975   GOST 6570-75 Electrical induction active and reactive energy meters. General technical specifications 17.220.20
91.140.50
06570 1996   GOST 6570-96 Electrical induction active and reactive energy meters. General specifications 17.220
06746 1975   GOST 6746-75 Capacitance measures. General specifications 17.220
06746 1994   GOST 6746-94 Measures of electrical capacitance. General technical requirements 17.220.20
07164   GOST 7164-78 SSI self-balancing servoinstruments. General specifications 17.220.20
07165 1978   GOST 7165-78 Direct current measuring bridges. General technical specifications 17.220.20
07165 1993   GOST 7165-93 D.C. bridges for measuring resistance 17.220.20
07590 1978   GOST 7590-78 Indicating analog electromeasuring instruments for measuring frequency. General technical specifications 17.220.20
07590 1993   GOST 7590-93 Direct acting indicating analogue electrical measuring instruments and their accessories. Part 4. Special requirements for freguency meters 17.220.20
07746 2001   GOST 7746-2001 Current transformers. General specifications 17.220.20
08039 1979   GOST 8039-79 Phase-angle and power-factor meters. 17.220.20
08039 1993   GOST 8039-93 Direct acting indicating analogue electrical measuring instruments and their accessories. Part 5. Special requirements for phase meters, power factor meters and synchroscopes 17.220.20
08042 1978   GOST 8042-78 Measuring converters. Instrument shunts. Specifications 17.220.20
08042 1993   GOST 8042-93 Direct acting indicating analogue electrical measuring instruments and their accessories. Part 8. Special requirements for accessories 17.220.20
08476 1978   GOST 8476-78 Wattmeters and varmeters. General technical specifications 17.220.20
08476 1993   GOST 8476-93 Direct acting indicating analogue electrical measuring instruments and their accessories. Part 3. Special requirements for wattmeters and varmeters 17.220.20
08623 1978   GOST 8623-78 Supplementary resistances for electrical measuring instruments. Specifications 17.220.20
08711 1978   GOST 8711-78 Ammeters and voltmeters. General technical specifications 17.220.20
08711 1993   GOST 8711-93 Direct acting indicating analogue electrical measuring inctruments and their accessories. Part 2. Special requirements for ammeters and voltmeters 17.220.20
08913 1976   GOST 8913-76 Electrical measuring instruments. Pivots. Technical requirements 17.220.20
09181 1974   GOST 9181-74 Electrical measuring instruments. Packing, marking, transport and storage 17.220.20
09245   GOST 9245-79 Measuring d.c. potentiometers. General specifications 17.220.20
09486 1979   GOST 9486-79 Alternating current measuring bridges. General requirements 17.220.20
09736 1991   GOST 9736-91 Electric apparatus of direct transformation for measuring non-electrical values. General technical requirments and metods of tests 17.220
09829 1981   GOST 9829-81 Light-beam oscillographs. General technical requirements 17.220.20
09999 1979   GOST 9999-79 Direct recording electrical measuring instruments. General technical specifications 17.220.20
09999 1994   GOST 9999-94 Direct acting recording electrical measuring instruments and their accessories 17.220.20
10287   GOST 10287-83 Direct current meters. General specifications 17.220.20
10374 1982   GOST 10374-82 Multi-scale portable measuring instruments. General technical specifications 17.220.20
10374 1993   GOST 10374-93 Direct acting indicating analogue electrical measuring instruments and their accessories. Part 7. Special requirements for multi-function instruments 17.220.20
11013   GOST 11013-81 Moving-coil oscillograph galvanometers. General specifications 17.220.20
11282 1975   GOST 11282-75 D.C. Measuring voltage dividers. General technical specifications 17.220.20
11282 1993   GOST 11282-93 Direct-current resistive volt ratio boxes 17.220.20
29.200
11859 1966   GOST 11859-66 Harmonic analizers. Methods and means for verification 17.220
17.020
12152 1966   GOST 12152-66 Frequency characteristics meters and generators of fluctuating freqnency. Control methods 17.220.20
12692 1967   GOST 12692-67 Resonense frequency meters. Methods and means for verification 17.220.20
13384 1981   GOST 13384-81 Measuring transformers for thermocouple and resistance thermometers SSI. General technical conditions 17.220.20
13384 1993   GOST 13384-93 Measuring transducers for thermoelectric transducers and resistance thermotransducers. General technical requirements and methods of tests 17.220
13607 1968   GOST 13607-68 Digital electrical measuring instruments and converters. Fundamental terms and definitions 01.040.17
17.220.20
14014 1982   GOST 14014-82 Digital instruments and measuring transducers of voltage, current and resistance. General specifications 17.220.20
14014 1991   GOST 14014-91 Digital instruments and measuring transducers of voltage, current and resistance. General technical requirements and methods of tests 17.220.20
14265 1979   GOST 14265-79 Direct acting analogue contact electrical measuring instruments. General specifications 17.220.20
16863 1971   GOST 16863-71 Measuring generators for frequency range 0,1-35 MHz. Methods and means of verification 17.220.20
17.020
17363 1971   GOST 17363-71 Time multichannel analyzers. Methods of measurement of parameters 17.220.20
18627 1973   GOST 18627-73 Startstop and synchronous telegraph distortion meters. Types and main characteristics 17.220.20
19875 1979   GOST 19875-79 Electrical measuring recording fast-acting instruments. General specifications 17.220.20
19876 1981   GOST 19876-81 D.C. measuring digital bridges. General technical specifications 17.220.20
20493 1990   GOST 20493-90 Voltage detectors. General specifications 17.220.20
20493 2001   GOST 20493-2001 Voltage detectors. General specifications 17.220.20
20798 1975   GOST 20798-75 Mutual inductance actual measures. General specifications 17.220.20
20906 1975   GOST 20906-75 Measuring means for magnetic quantities. Terms and definitions 01.040.17
17.220.20
21175 1975   GOST 21175-75 Inductance actual measures. General specifications 17.220.20
22261 1982   GOST 22261-82 Means for measuring of electrical quantities. General technical specifications 17.220.20
22261 1994   GOST 22261-94 Means for measuring electrical and magnetic quantities. General specifications 17.220.20
23217 1978   GOST 23217-78 Direct-reading indicating electrical measuring instruments. Marking symbols 17.220.20
23474 1979   GOST 23474-79 Cable apparatus. General technical requirements, acceptance rules and test methods 17.220.20
23624 1979   GOST 23624-79 Measuring laboratory current transformers. General specifications 17.220.20
23624 2001   GOST 23624-2001 Measuring laboratory current transformers. General specifications 17.220.20
23625 1979   GOST 23625-79 Measuring laboratory voltage transformers. General specifications 17.220.20
23625 2001   GOST 23625-2001 Measuring laboratory voltage transformers. General specifications 17.220.20
23706 1979   GOST 23706-79 Ohmmeters. General technical specifications 17.220.20
23706 1993   GOST 23706-93 Direct acting indicating analogue electrical measuring instruments and their accessories. Part 6. Special requirements for ohmmeters (impedance meters) and conductance meters 17.220.20
23737 1979   GOST 23737-79 Electric resistance measures. General specifications 17.220.20
23854 1979   GOST 23854-79 Level meters of electrical signals. General technical requirements and test methods 17.220.20
23913 1979   GOST 23913-79 Electrometric measurement means. General technical requirements 17.220.20
24855 1981   GOST 24855-81 Analogous transformers measuring current, voltage, capacity, friquency, resistance. General specifications 17.220.20
25242 1982   GOST 25242-82 A.C. Digital automatic balanced bridges. General specifications 17.220.20
25242 1993   GOST 25242-93 Digital instruments to measure immittance parameters. General technical requirements and methods of tests 17.220.20
25258 1982   GOST 25258-82 Electrometric measurement means. Acceptance rules and test methods 17.220
25372 1995   GOST 25372-95 Symbols for alternating-current electricity meters 01.080.40
91.140.50
17.220.20
25990 1983   GOST 25990-83 Electrical active energy meters, accuracy class 2,0. Acceptance control 17.220.20
26033 1983   GOST 26033-83 Metering amplifiers of direct current and its voltage. General specifications 17.220.20
26033 1991   GOST 26033-91 Metering amplifiers of direct current and its voltage. The general technical requirements and the methods of tests 17.220.20
26035 1983   GOST 26035-83 Alternating current electronic electricity meters. General specifications 17.220.20
26364 1990   GOST 26364-90 Ferritometers for austenitic steels. General specifications 17.220.20
27537 1987   GOST 27537-87 Digital readout units. General specifications 17.220.20
30012-01 1993   GOST 30012.1-93 Direct acting indicating analogue electrical measuring instruments and their accessories. Part 1. Definitions and general requirements common to all parts 17.220.20
30012-01 2002   GOST 30012.1-2002 Direct acting indicating analogue electrical measuring instruments and their accessories. Part 1. Definitions and general requirements common to all parts 17.220.20
30012-09 1993   GOST 30012.9-93 Direct acting indicating analogue electrical measuring instruments and their accessories. Part 9. Methods of tests 17.220
30421 1996   GOST 30421-96 Electrical capacitance, pure resistance and dissipation factor high-voltage meters. General specifications 17.220.20
30605 1998   GOST 30605-98 Digital voltage and current measuring converters. General specifications 17.220.20
29.200
30606 1998   GOST 30606-98 Digital converters for voltage or current measuring. Basic parameters. General technical requirements. Methods of tests 17.220.20
50355 1992   GOST R 50355-92 Digital instruments to measure immittance parameters. General technical requirements and methods of tests 17.220.20
51070 1997   GOST R 51070-97 Woltages instruments of electrical and magnetic fields. General technical requirements and methods of tests 17.220.20
51288 1999   GOST R 51288-99 Means for measuring electric and magnetic quantities. Exploitation documents 17.220.20
51317-03-08 1999   GOST R 51317.3.8-99 Electromagnetic compatibility of technical equipment. Signalling on low-voltage electrical installations. Emission levels, frequency bands and electromagnetic disturbance levels 33.100
17.220.20
51317-04-15 1999   GOST R 51317.4.15-99 Electromagnetic compatibility of technical equipment. Flikermeter. Technical requirements and test methods 33.100
17.220.20
51350 1999   GOST R 51350-99 Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 1. General requirements 19.020
17.220.20
13.260
52319 2005   GOST R 52319-2005 Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 1. General requirements 11.080
17.060
17.080
17.100
17.120
17.120.01
17.200.20
17.220
17.220.20
52320   GOST R 52320-2005 Electricity metering equipment (а.с). General requirements. Tests and test conditions. Part 11. Meters for electric energy 17.220
52321   GOST R 52321-2005 Electricity metering equipment (а.с). Particular requirements. Part 11. Electromechanical meters for active energy (classes 0,5; 1 and 2) 17.220.20
52322   GOST R 52322-2005 Electricity metering equipment (а.с). Particular requirements. Part 2I. Static meters for active energy (classes 1 and 2) 17.220
52323   GOST R 52323-2005 Electricity metering equipment (а.с). Particular requirements. Part 22. Static meters for active energy classes (0,2S and 0,5S) 17.220
52425 2005   GOST R 52425-2005 Electricity metering equipment (a.c.). Particular requirements. Part 23. Static meters for reactive energy 17.220
52555 2006   GOST R 52555-2006 Electricity metering equipment. Dependability. Part 11. General concepts 17.220.20
52718 2007 GOST R 52718-2007 Electricity metering equipment. Dependability. Part 21. Collection of meter dependability data from the field 17.220.20
ED1 07164 1978   GOST ED1 7164-78 Self-balancing servo instruments of SSI. General specifications. Export supplement 17.220.20
IEC 61010-002-031 1999   GOST R IEC 61010-2-031-99 [withdrawn? =>GOST R IEC 61010-031-2005]
Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-031. Particular requirements for hand-held probe assemblies for electrical measurement and test
19.020
13.260
17.220.20
IEC 61010-002-032 1999   GOST R IEC 61010-2-032-99 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for hand-held current clamps for electrical measurement and test 19.020
13.260
17.220.20
IEC 61037 2001   GOST R IEC 61037-2001 Electricity metering. Tariff and load control. Particular requirements for electronic ripple control receivers 17.220
IEC 61038 2001   GOST R IEC 61038-2001 Electricity metering. Tariff and load control. Particular requirements for time switches 17.220
IEC 61107 2001   GOST R IEC 61107-2001 Data exchange for meter reading, tariff and load control. Direct local data exchange 17.220
35.110
IEC 61142 2001   GOST R IEC 61142-2001 Data exchange for meter reading, tariff and load control. Local bus data exchange 17.220.20
35.110
IEC 61557-01 2005   GOST R IEC 61557-1-2005 Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 1. General requirements 17.220.20
29.080
29.240
IEC 61557-02 2005   GOST R IEC 61557-2-2005 Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 2. Insulation resistance 17.220.20
29.080
29.240
IEC 61557-03 2006   GOST R IEC 61557-3-2006 Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 3. Loop impedance 17.220.20
29.080
29.240
IEC 61557-04 2007 GOST R IEC 61557-4-2007 Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 4. Resistance of earth connection and equipotential bonding 17.220.20
29.080
29.240
IEC 61557-05 2008 GOST R IEC 61557-5-2008 Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 5. Resistance to earth 17.220.20
29.080
29.240
17.240 Top 放射線測定
注: 放射線防護→ 13.280
Sort Mk 規格番号 規格名称(英語) 国際規格分類
( ICSコードの説明 )
00002-733 1968   GOST 2.733-68 Unified system for designe documentation. Graphical symbols of radiation detectors in circuits 01.080.99
17.240
00004-059 1979   GOST 4.59-79 Product-quality index system. Means of measuring ionizing radiations. Nomenclature of indices 03.120
17.240
00008-0013 1972   GOST 8.013-72 State system for ensuring the uniformity of measurements. Condenser personnel dosimeters. Verification. Methods and means 17.240
00008-0031 1982   GOST 8.031-82 State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means of measuring neutron flux and its density 17.240
00008-0033 1984   GOST 8.033-84 State system for ensuring the uniformity of measurements. State primary ^standard and all-union verification schedule for means measuring the nuclide activity 17.240
00008-0033 1996   GOST 8.033-96 State system for ensuring the uniformity of measurements. State verification schedule for means measuring radionuclide activity flux and flux density of alfa-, beta-particles and photons of radionuclide source 17.240
00008-0034 1982   GOST 8.034-82 State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means measuring exposure dose, exposure dose rate and fluense energy of X-and-gamma radiation 17.240
00008-0035 1982   GOST 8.035-82 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring absorbed dose and absorbed dose rate of beta-radiation 17.240
00008-0037 1981   GOST 8.037-81 State system for ensuring the uniformity of measurements. State primary standard and state verifications schedule for noise power spectral density measuring instruments within the frequency range fro 1,0 up to 37,5 ghz 17.240
00008-0039 1979   GOST 8.039-79 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring nuclide activity in gases 17.240
00008-0040 1984   GOST 8.040-84 The state system for ensuringthe uniformity of measurements. Radiometers for measuring beta-contamination of surfaces. Calibration methods 17.240
00008-0041 1984   GOST 8.041-84 State system for ensuring the uniformity of measurements. Radiometers for measuring alpha-active substances contamination of surfaces. Calibration methods 17.240
00008-0070 1983   GOST 8.070-83 State system for ensuring the uniformity measurements. State primary standard of unit of absorbed dose rate of photon ionizing radiation 17.240
00008-0070 1996   GOST 8.070-96 State system for ensuring unisormity of measurements. State verification schedule for means measuring absorbed and equivalent dases and rate of absorbed and equivalent doses of photon and electron radiations 17.240
00008-0087 1981   GOST 8.087-81 State system for ensuring the uniformity of measurements. Dosimetriс set-ups for calibrating photon and electron radiation. Methods and means of calibration 17.240
17.020
00008-0087 2000   GOST 8.087-2000 State system for ensuring the uniformity of measurements. Standart dosimetric installations for X-ray and gamma-radiation. Methods of calibration on the exposure dose rate and air kerma rate 17.240
00008-0090 1979   GOST 8.090-79 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means, measuring specific radioactive aerosols concentration 17.240
00008-0105 1980   GOST 8.105-80 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring neutron flux density and fluence at nuclear installations 17.240
00008-0191 1976   GOST 8.191-76 State system for ensuring the uniformity of measurement. State special standard and all-union verification schedule for means measuring radiation field parameters of antenna systems with operating dimensions of apertures from 0,1 to 0,4 m at the frequency range from 2,5 to 12 GHz 17.240
00008-0193 1976   GOST 8.193-76 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring radiation field parameters of antenna systems with operating dimension of apertures from 0,75 to 1,5 m at the frequency range from 2,5 to 42 GHz 17.240
33.120.40
00008-0198   GOST 8.198-85 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring pulse laser radiation power and dynamic parameters of laser detectors in the wavelength range of 0,4-10,6 um 17.240
00008-0201 1976   GOST 8.201-76 State system for ensuring the uniformity of measurements. The state special standard and all-union verification schedule for means measuring instruments of maximum-energy flux of stopping radiation at photon energy from 0,8 to 8,0 pJ (5 to 50 MeV) 17.240
00008-0203 1976   GOST 8.203-76 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring of absorbed dose of X-ray radiation at maximum energy from 3 to 9 pJ (20 to 60 keV) 17.240
00008-0273 1978   GOST 8.273-78 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring radiant flux 1x10 in minus 6 degree to 1x10 in minus 2 degree W in the wavelength range of 0,4 - 1,4 um 17.240
00008-0275 1991 GOST 8.275-91 [withdrawn]
State system for ensuring the uniformity of measurements. State verification schedule for means, measuring laser output average power and laser pulse energy within the wavelength range of 0,3 to 12,0 um
17.240
00008-0308 1978   GOST 8.308-78 State system of ensuring the uniformity of measurements. Functional units, sub-assemblies and devices in instruments for measurement of ionizing radiation. Counters of pulses. Methods and means of verification 17.240
00008-0309 1978   GOST 8.309-78 State system for ensuring the uniformity of measurements. Highly directional antennas. The technique of measurements for determining parameters by the aperture field 17.240
33.120.40
00008-0347 1979   GOST 8.347-79 State system for ensuring the uniformity of measurements. The state primary standard and all-union verification schedule for means measuring absorbed dose rate and equivalent dose rate of neutron radiation 17.240
00008-0355 1979   GOST 8.355-79 State system for ensuring the uniformity of measurements. Neutron radiometers. Methods and means of verification 17.240
00008-0357 1979   GOST 8.357-79 State system for ensuring the uniformity of measurements. Laser radiation measuring instruments. Energy, spectral and time renges 17.240
00008-0413 1981   GOST 8.413-81 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring radiation field parameters of antenna systems with operating dimensions of apertures from 0,40 to 0,75m at the frequency range from 8.2 тo 40,0 GHz 17.240
33.120.40
00008-0414 1981   GOST 8.414-81 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring radiation field parameters of antenna systems with operating dimensions of apertures from 1,5 to 3,0 m at the frequency range from 2,5 to 40,0 GHz 17.240
33.120.40
00008-0443 1981   GOST 8.443-81 State system of ensuring the uniformity of measurements. Standard instruments for monopulse and modulated puls laser radiation peak power measurements. Methods and means for verification 17.240
17.020
00008-0444 1981   GOST 8.444-81 State system of ensuring the uniformity of measurements. Standard instruments for dynamic parameter measurements of puls laser measuring transducers. Methods and means for verification 17.240
17.020
00008-0445 1981   GOST 8.445-81 State system for ensuring the uniformity of measurements. Standard means mesuring laser output average power. Methods and means for verification 17.240
17.020
00008-0452 1982   GOST 8.452-82 State system for ensuring the uniformity of measurements. Radioisotope X-ray devices. Methods and means for verification 17.240
00008-0473 1982   GOST 8.473-82 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for measuring exposure dose, mean exposure rate, mean energy fluence and mean density of pulsed Х-ray radiation fluence energy 17.240
00008-0483 1983   GOST 8.483-83 State system for ensuring the uniformity of measurements. Reference neutren sources at nuclear instollations general statements and metrological certification 17.240
27.120.30
00008-0496 1983   GOST 8.496-83 State system for ensuring the uniformity of measurements. Radiation safety. Quality factor of ienizing radiations 17.240
13.280
00008-0521 1984   GOST 8.521-84 State system for ensuring the uniformity of measurements. Sets for calibrating neutron radiation. Methods of verification 17.240
00008-0526 1985   GOST 8.526-85 State system for ensuring the uniformity of measurements. Radiometers of natural radioactive aerosels. Verification procedure 17.240
00008-0527 1985   GOST 8.527-85 State system for ensuring the uniformity of measurements. Measuring instruments of artifical radioactive aerosols volumetric activity. Verification procedure 17.240
00008-0529 1985   GOST 8.529-85 State system for ensyring the uniformity of measurements. Measuring instruments of a volumetric astivity of the vaporous iodine-131. Methods of verification 17.240
00008-0534 1985   GOST 8.534-85 State system for ensuring the unification of measurements. State special standard and state verification schdule for means measuring radiation field parameters of antenna systems with aperture dimensions from 5 to 100 m and of the airborne antennas within the frequency range from 0,3 to 3,0 GHz 17.240
33.120.40
00008-0586 2001   GOST R 8.586-2001 State system for ensuring the uniformity of measurements. Instruments measuring the characteristics of artificial and natural radiation for the safety of museum exhibits. Methods for verification 17.020
17.240
00008-0587 2001   GOST R 8.587-2001 State system for ensuring the uniformity of measurements. Instruments measuring the characteristics of optical radiation of solar simulators. Methods for verification 17.020
17.240
00008-0588 2001   GOST R 8.588-2001 State system for ensuring the uniformity of measurements. Ultraviolet radiometers for ozone monitoring. Methods for verification 17.020
17.240
00008-0590 2001   GOST R 8.590-2001 State system for ensuring the uniformity of measurements. Instruments measuring the characteristics of ultraviolet radiation in labour safety. Methods for verification 17.020
17.240
00008-0594 2002   GOST R 8.594-2002 State system for ensuring the uniformity of measurements. The metrological ensuring of radiation control. General principles 17.020
17.240
00022-08-08 2001   GOST R 22.8.08-2001 Safety in emergencies. Method of external gamma rays absorbed dose determination by thermoluminescence of quartz extracted from building ceramics. The order of carrying out measurements 17.240
13.280
13760 1968   GOST 13760-68 Emanometers type ЭМ-6. Methods and instruments of their calibration 17.240
17.020
14105 1976   GOST 14105-76 Radiation detectors. Terms and definitions 01.040.17
17.240
14336 1987   GOST 14336-87 Instruments using a source of ionizing radiation. Terms and definitions 01.040.17
17.240
14337 1978   GOST 14337-78 Ionizing radiation measuring instruments. Terms and definitions 01.040.17
17.240
14642 1969   GOST 14642-69 Functional units, sub-assemblies and devices used in instruments for measurement of ionizing radiation. Terms and definitions 01.040.17
17.240
15484 1981   GOST 15484-81 Ionizing radiations and their measurements. Terms and definitions 01.040.17
17.240
15822 1970   GOST 15822-70 Cups and planchets for radioactive samples. Design and marking 17.240
16839 1971   GOST 16839-71 Scintillation detector units of ionizing radiation. Basic dimensions 17.240
16957 1980   GOST 16957-80 Multichannel amplitude analyzers. Basic parameters and general technical requirements 17.240
17038-00 1979   GOST 17038.0-79 Ionizing radiation scintillation detectors. Commonrules for methods of scintillation parameters measurements 17.240
17038-01 1979   GOST 17038.1-79 Ionizing radiation scintillation detectors. Methods for measurement of non-linearity and instability of installation for determination of scintillation detector parameters 17.240
17038-02 1979   GOST 17038.2-79 Ionizing-radiation scintillation detectors. Method for measurement of detector light yield of full absorption peak or compton distribution edge 17.240
17038-03 1979   GOST 17038.3-79 Ionizing-radiation scintillation detectors. Method for measurement of detector light yield of photomultiplier anode current 17.240
17038-04 1979   GOST 17038.4-79 Ionizing-radiation scintillation detectors. Method for measurement of relative scintillator efficiency 17.240
17038-05 1979   GOST 17038.5-79 Ionizing-radiation scintillation detectors. Method for measurement of photomultiplier spectrometric constant used for detector scintillation parameter determination 17.240
17038-06 1979   GOST 17038.6-79 Ionizing-radiation scintillation detectors. Method for measurement of intrinsic and given detector resolution 17.240
17038-07 1979   GOST 17038.7-79 Ionizing-radiation scintillation detectors. Methods for measurement of effective light attenuation index of scintillation in detector 17.240
17038-08 1989   GOST 17038.8-89 Ionizing radiation scintillation detectors. Methods for measuring detector background and intrinsic background 17.240
17134 1980   GOST 17134-80 Relay type radioisotope instruments. General specifications 17.240
17138 1981   GOST 17138-81 Equipment for monitoring fuel element ruptures in nuclear reactors of nuclear power stations. General technical requirements and test methods 27.120.10
17.240
17209 1989   GOST 17209-89 Measuring instruments of radionuclide volume activity in liquid. General technical requirements and test methods 17.240
17225 1985   GOST 17225-85 Radiometres for metering covers on alfa and beta activity dirt. General technical requirements and test methods 17.240
17226 1971   GOST 17226-71 Measureres for exposure rate measuring of gamma and X radiations with photon energy of 8 to 480 fj. Technical requirements and test methods 17.240
18166 1972   GOST 18166-72 lonizing-radiation detector units.
Basic dimensions
17.240
18177 1981   GOST 18177-81 Semiconductor detectors of ionizing radiation.
Terms and definitions
01.040.17
17.240
18229 1981   GOST 18229-81 Spektrometric charge-sensitive preamplifiers for semiconductor radiation detectors. Types, basic parameters and methods of measurements 17.240
18230 1972   GOST 18230-72 Power supplies spectrometric semiconductor radiation detectors. Types and basic parameters 17.240
18398 1981   GOST 18398-81 The ionizing radiation germanium detectors for spectrometry. General specifications 17.240
18622 1979   GOST 18622-79 Interaction of ionizing radiations with matter. Chemical composition tissue eguivalent matter 17.240
18668 1973   GOST 18668-73 Ionization chamber for radioactive instrument. Types and main parameters 17.240
19154 1973   GOST 19154-73 Signals electric, input and output of ionizing radiation measuring devices, their functional nits and assemblies. General specifications 17.240
19189 1973   GOST 19189-73 Gas ionizing radiation detectors. Terms and definitions 01.040.17
17.240
19868 1974   GOST 19868-74 Spectrometric linear amplifiers for transistorized detectors of ionizing radiations. Methods of measuring parameters 17.240
20268 1983   GOST 20268-83 Gamma radiation detectors standard glucose type DOG-0,05/2. Specifications 17.240
20766 1975   GOST 20766-75 Ionizing radiation semiconductor spectrometer detectors. Types and basic parameters 17.240
21496 1989   GOST 21496-89 Measuring instruments of radionuclide volume activity in gas. General technical requirements and test methods 17.240
22251 1989   GOST 22251-89 Measuring instruments of radioactive artificial aerosol volume activity. General technical requirements and test methods 17.240
22252 1982   GOST 22252-82 Multichannel amplitude analyzers. Methods of parameters measurements 17.240
22988-00 1978   GOST 22988.0-78 Gas caunters. Methods of characteristic measurement. General principles 17.240
22988-01 1978   GOST 22988.1-78 Gas caunters. Method of threshold voltage measurement 17.240
22988-02 1978   GOST 22988.2-78 Gas caunters. Method of corona descharge voltage measurement 17.240
23077 1978   GOST 23077-78 The ionizing radiation scintillation detectors. Terms, definitions and literal symbols 01.040.17
17.240
23923 1989   GOST 23923-89 Measuring instruments of radionuclide specific activity. General technical requirements and test methods 17.240
24469 1980   GOST 24469-80 Instruments for measurements laser radiation parameters. General technical requirements 17.240
25368 1982   GOST 25368-82 Means for measurement of pulse laser radiation maximum power. Types and main parameters. Measuring methods 17.240
25645-145   GOST 25645.145-88 [?] 17.240
25645-151 1990   GOST 25645.151-90 Solar hard X-ray. Energy spectrum 17.240
25645-165 2001   GOST R 25645.165-2001 Solar energetic particles. Probabilistic model for proton fluxes 17.240
25645-335 1994   GOST R 25645.335-94 Spacecrafts. Gamma-activity characteristics induced in structural materials 49.025
17.240
25811 1983   GOST 25811-83 Means measuring laser output average power. Types. Basic parameters. Measuring methods 17.240
25851 1983   GOST 25851-83 Radiometric instruments. Methods of main parameters measurement 17.240
25935 1983   GOST 25935-83 Dosimetric instruments, measurement methods of main parameters 17.240
26222 1986   GOST 26222-86 Ionizing-radiation semiconductor detectors. Methods of parameters measurement 17.240
26344-00 1984   GOST 26344.0-84 Nuclear instrumentation for nuclear power stations. Basic principles 27.120.20
17.240
26652 1985   GOST 26652-85 Scintillation detection blocks. General requirements and test methods 17.240
26874 1986   GOST 26874-86 Ionizing radiation power spectrometers. Methods of basic parameters measurement 17.240
26995 1986   GOST 26995-86 Ionization gas-discharge detectors. Specifications 17.240
27172 1986   GOST 27172-86 Detector sets of ionizing radiations for spectrometry. Types and general parameters 17.240
27173 1986   GOST 27173-86 Detector sets of ionizing radiations for spectrometry. General technical specification 17.240
27297 1987   GOST 27297-87 Nuclear instrument making items. Control equipment for shell states of fuel elements of nuclear reactors. General technical requirements and test methods 17.240
27.120.10
27445 1987   GOST 27445-87 Neutron flux monitoring systems for control and protection of nuclear reactors. General technical requirements 27.120.10
17.240
13.280
27451 1987   GOST 27451-87 Ionizing radiation measuring means. General specifications 17.240
27452 1987   GOST 27452-87 Safety radiation control apparatus for nuclear power stations. General technical requirements 27.120.20
17.240
27841 1988   GOST 27841-88 Scintillators and containers of ionizing radiation detectors. Dimensions 17.240
27961 1988   GOST 27961-88 Detector sets of X-radiation for spectrometry. Test methods 17.240
28031 1989   GOST 28031-89 Ionization chambers for radioisotope instruments. General technical requirements 17.240
28129 1989   GOST 28129-89 Test tubes for radioactive samples and stoppers for them. Basic dimensions 17.240
28258 1989   GOST 28258-89 Radioisotope X-ray devices. Types, мain parameters and technical requirements 17.240
28271 1989   GOST 28271-89 Portable radiometric and dosimetric instruments. General technical requirements and test methods 17.240
28488 1990   GOST 28488-90 Multichannel analyzers as multichannel scalers. Test methods 17.240
29074 1991   GOST 29074-91 Equipment for monitoring of radiation situation. General requirements 13.280
17.240
29075 1991   GOST 29075-91 Nuclear instrumentation systems for nuclear power stations. General requirements 27.120.20
17.240
29115 1991   GOST 29115-91 Detector sets of gamma radiation for spectrometry. Metods basic parameters measurement 17.240
29279 1992   GOST 29279-92 Multichannel pulse height analyzers. Characteristics and test methods of time-to-amplitude converters 17.240
51570 2000   GOST R 51570-2000 Decontamination of territories. Method for determination of penetration depth of cesium-137 into the soil 17.240
13.280
51713 2001   GOST R 51713-2001 Ingots of ferrous and non-ferrous metals. Permissible levels of specific activity of the radionuclides. Method of radioation control 77.040.20
17.240
51724 2001   GOST R 51724-2001 Shielded facilities, spaces, installations. Reduced geomagnetic field. Measuring methods and assessment of field intensity compliance with technical requirements and hygiene standards 33.020
17.240
51919 2002   GOST R 51919-2002 Radionuclide ionizing radiation sealed sources. Leakage test methods 27.120.30
17.240
51963 2002   GOST R 51963-2002 Standard radionuclide solutions and standard ionizing radiation radionuclide sources. Verification certificate contents 17.240
52125 2003   GOST R 52125-2003 Sealed radionuclide X-radiation sources. Methods of parameters measurement 17.240
IEC 61066 1993   GOST R IEC 1066-93 Thermoluminescene dosimetry systems for personal and environmental monitoring. General technical requirements and test methods 13.280
17.240
Sort Mk 規格番号 規格名称(英語) 国際規格分類
( ICSコードの説明 )


Home FAQ GOST規格の説明 Top 質問l ご意見、ご要望、ご質問 はお気軽に

©2004-2008 H.Ishiguro